Summary: Ref T2222. This probably doesn't get everything, but should improve many of the newer transactions.
Test Plan: Looked at feed after making some edits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8368
Summary: Ref T2222. This should help new mail thread properly with old mail.
Test Plan: Will push.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8367
Summary: Ref T2222. This updates the new JIRA field to be editable.
Test Plan: Used `/editpro/` to edit associated JIRA issues.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8364
Summary: Ref T2222. This will probabaly have a few rough edges too, but seems to work well.
Test Plan:
- Made a bunch of comments while building this.
- Made some new comments.
- Verified that the Asana/JIRA integration is only a little bit janky, not completely broken.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8362
Summary: Ref T2222. This will probably have some rough edges for a bit (e.g., weird cases I didn't remember or think of), but there's no change to the underlying data and we can easily revert if things get too messy.
Test Plan: Looked at a variety of revisions and saw sensible output.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8361
Summary:
Ref T2222. These are pretty straightforward.
For these fields and a few others, the existing code shows the value for the "current/manual" diff (i.e., the diff selected in the diff selection table), not the "active" diff (i.e., the most recent diff attached to the revision). I'm going to drop that for now (always showing the most recent diff instead) and then reevaluate it once we're switched over. In 95% of cases these are the same, anyway.
Test Plan: Looked at fields; this diff changes nothing on its own.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8359
Summary:
Ref T2222. Ref T3886. Gets the storage-based fields working.
This requires future changes to actually do anything, all this code is inactive.
Test Plan: {F118863}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886, T2222
Differential Revision: https://secure.phabricator.com/D8357
Summary: Ref T2222. Ref T3886. Differential has a legacy storage table for auxiliary fields; move the data to modern storage.
Test Plan:
- Ran migration.
- Verified fields still worked properly afterward (view, edit, etc).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886, T2222
Differential Revision: https://secure.phabricator.com/D8355
Summary:
Ref T2222. This isn't complete and doesn't change runtime behavior yet (the new fields are not glued to the interface), but implements many fields.
(The remaining fields have something weird going on with them, for the most part.)
Test Plan:
With additional changes, rendered most fields sensibly:
{F118834}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8354
Summary:
The intent of getOrBuildEngine() is to save some boilerplate in cases where we're just using a standard engine, but it didn't get cached so we'd rebuilt it over and over again.
This was especially bad in Differential with a large number of inlines.
Test Plan: "Query" tab of services is no longer quite so ridiculous in Differential.
Reviewers: btrahan, dctrwatson
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8352
Summary:
Currently, the linter raises `XHP29` warnings for these files because they are not abstract or final.
I guess there are two possibly solutions, either making the classes final or marking them as `@concrete-extensible`. Given that there are no subclasses of these classes in the `phabricator`, `arcanist` and `libphutil` repositories... I opted to declare the classes as final.
Test Plan:
The following linter warnings are gone:
```
>>> Lint for src/aphront/configuration/AphrontDefaultApplicationConfiguration.php:
Warning (XHP29) Class Not abstract Or final
This class is neither 'final' nor 'abstract', and does not have a
docblock marking it '@concrete-extensible'.
3 /**
4 * @group aphront
5 */
>>> 6 class AphrontDefaultApplicationConfiguration
7 extends AphrontApplicationConfiguration {
8
9 public function __construct() {
>>> Lint for src/applications/differential/mail/DifferentialReplyHandler.php:
Warning (XHP29) Class Not abstract Or final
This class is neither 'final' nor 'abstract', and does not have a
docblock marking it '@concrete-extensible'.
1 <?php
2
>>> 3 class DifferentialReplyHandler extends PhabricatorMailReplyHandler {
4
5 private $receivedMail;
6
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8347
Summary:
Ref T2222. Ref T3886. Ref T418. A few changes:
- CustomField can now index into global search.
- Use CustomField fields instead of older custom fields for Differential global search. (This slightly breaks any custom fields which exist, but they are presumably very rare, and probably do not exist; this break is also very mild.)
- Automatically perform CustomField and Subscribable indexing on applicable object types.
Test Plan: Used `bin/search index` to reindex a bunch of stuff, then searched for it. Debug-dumped abstract documents to inspect them.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418, T3886, T2222
Differential Revision: https://secure.phabricator.com/D8346
Summary: Ref T2222. This enriches mail a little bit to get these rendering pretty much like they do now.
Test Plan: {F118255}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8343
Summary:
Ref T2222. This requires one new trick:
- When merging edge transactions which both add/update an edge, the Editor gets to control how the edge data is merged.
Specifically, we pick the "strongest" state to keep, so "accept + comment" leaves you with an accept instead of a comment.
Test Plan: Accepted, commented on, and comment + accepted revisions. Added some debugging dumps to verify that the merging was getting hit and working correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8340
Summary:
Ref T2222. This doesn't feel super clean, but doesn't feel too bad either.
Basically, Differential transactions can have secondary state-based effects (changing the overall revision status) when reviewers resign, are removed, accept, or reject revisions.
To deal with this in ApplicationTransactions, I did this:
- `applyFinalEffects()` can now alter the transaction set (notably, add new ones). This mostly matters for email, notifications and feed.
- In Differential, check for an overall revision state transition in `applyFinalEffects()` (e.g., your reject moving the revision to a rejected state).
- I'm only writing the transaction if the transition is implied and indirect.
- For example, if you "Plan Changes", that action changes the state on its own so there's no implicit state change transaction added.
The transactions themselves are kind of fluff, but it seems useful to keep a record of when state changes occurred in the transaction log. If people complain we can hide/remove them.
Test Plan: {F118143}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8339
Summary: Ref T2222. This mostly makes Accept/Reject work. The big missing piece is that overall revision status does not yet update properly. I need to think about how I want that to work a little bit more.
Test Plan: Accepted and rejected some stuff.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8333
Summary: Ref T2222. This is obsolete and no longer used. We could deduce it from transactions or commits in modern Phabricator if we wanted it. We may implement a more general mechanism for T4434.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8330
Summary:
Ref T2222. This introduces two small new concepts:
- `expandTransactions()`: allows a transaction to expand into several transactions. For example, "resign" adds a "remove reviewers" transaction.
- We have some other cases which could use this, but currently hard-code things outside of the `Editor`.
- One example is that in Maniphest, closing a task implies claiming it if it is unowned.
- `setIgnoreOnNoEffect()`: The whole Editor can be set to continue or stop if any transactions have no effect, but this allows the behavior to be refined at the individual transaction level. This is primarily to make the UX less confusing, so the user gets only a single relevant error instead of one for each expanded transaction.
Otherwise, this is pretty straightforward.
Test Plan:
Rigged comment form to use SavePro controller, enabled resign action, then tried to resign from a bunch of stuff.
{F117743}
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8328
Summary: Ref T2222. Implements the simpler actions (abandon, reclaim, close, reopen, plan changes, request review) in a transactional way with validation and effect checks.
Test Plan:
- Rigged submissions to point at the Pro controller.
- Rigged dropdown to have all these options all the time.
- Tried to apply about 20-30 of these operations to various revisions and always got the expected result (success, error, or no-op).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8307
Summary: Ref T2222. Makes the "pro" controller work with inlines.
Test Plan: Added a bunch of inlines and saved them with the "pro" controller.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8306
Summary: Ref T2222. Adds a mostly-functional "Pro" comment controller. This does the core stuff, but does not yet do actions (accept, reject, etc.) or inline comments.
Test Plan: Changed the `if (false)` to an `if (true)`, then made some comments, etc. This is normally unreachable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8304
Summary: Ref T2222. Adds basic support for email.
Test Plan: Received an email via `/editpro/`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8303
Summary: Ref T2222. Currently this is a giant header box thing. Move it into the ObjectBox.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8301
Summary:
Ref T3886. Broadly, fields break down into two types right now: fields which store data on the object (like `DifferentialTitleField`) and fields which store data in custom field storage.
The former type generally reads data from the object into local storage prior to editing, then writes it back afterward. Currently, this happens in `didSetObject()`.
However, now that we load and set objects from ApplicationTransactionQuery, we'll do this extra read-field-values on view interfaces too. There, it's unnecessary and sometimes throws data-attached exceptions.
Instead, separate these concepts, and do all the read-from-object / read-from-storage in one logical chunk, separate from `didSetObject()`.
Test Plan:
- Edited Differential revision.
- Edited Maniphest task.
- Edited Project.
- Edited user profile.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886
Differential Revision: https://secure.phabricator.com/D8299
Summary: Report from @zeeg, I think this is the root issue. Currently, if a project is CC'd we'll write "CC: projectname", but should write "CC: #projectname".
Test Plan: Verified that we now write "CC: #projectname".
Reviewers: btrahan, zeeg
Reviewed By: zeeg
CC: zeeg, aran
Differential Revision: https://secure.phabricator.com/D8296
Summary:
Ref T2222. Differential has custom code for managing subscriptions, but no longer requires it.
The one trick is that we don't have a hook for loading related data on the subscriptions workflow right now. Just glue that in for the moment; it's relatively harmless, and once Diffusion converts we'll have more context on how to best surface it properly.
Test Plan: Subscribed and unsubscribed from a revision. Viewed different revisions and saw correct subscription state.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8293
Summary: Ref T3886. Now that a custom field can emit a core transaction, just emit a subscribers transaction.
Test Plan: {F116014}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886
Differential Revision: https://secure.phabricator.com/D8289
Summary:
Ref T3886. Ref T418.
- Adds "View Policy" and "Edit Policy" fields.
- Allows CustomFields to produce arbitrary types of transactions, so these fields can produce standard view/edit policy transactions and get all the strings and validation associated with them.
Test Plan: {F116001}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418, T3886
Differential Revision: https://secure.phabricator.com/D8287
Summary: Ref T3886. Moves some of the "required" logic to the base class ("DifferentialCoreField") so Title and Test Plan can share it.
Test Plan: Edited revisions using "pro" editor, saw test plan transactions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886
Differential Revision: https://secure.phabricator.com/D8285
Summary:
Ref T3886. Ref T418. For fields like "Summary" and "Test Plan" where changes can't be summarized in one line, allow CustomField to provide a "(Show Details)" link and render a diff.
Also consolidate some of the existing copy/paste, and simplify this featuer slightly now that we've move to dialogs.
Test Plan:
{F115918}
- Viewed "description"-style field changes in phlux, pholio, legalpad, maniphest, differential, ponder (questions), ponder (answers), and repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886, T418
Differential Revision: https://secure.phabricator.com/D8284
Summary:
Ref T3886.
- Adds "Summary" field.
- Adds "CoreField" for fields stored on the actual object, to reduce code duplication a bit for the main fields.
Test Plan: {F115902}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886
Differential Revision: https://secure.phabricator.com/D8283
Summary: Ref T2222. Ref T1790. I partially modernized this recently, but bring it to the mail version too.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: zeeg, aran
Maniphest Tasks: T1790, T2222
Differential Revision: https://secure.phabricator.com/D8294
Summary:
Ref T3496. Currently, we call loadAssets() on each revision table, which invokes a new revision query and a pile of subqueries.
Instead, add `needFlags()` and `needDrafts()` to `RevisionQuery`. Some day these could perhaps be more generic.
Test Plan:
- Viewed home, differential, etc., no longer saw 9203809238 queries being run for no reason.
- Drafts and flags still appear properly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3496
Differential Revision: https://secure.phabricator.com/D8277
Summary:
Ref T3886. I spent a few hours trying to make `DifferentialFieldSpecification` extend `PhabricatorCustomField` so I could be more blunt in my approach here and just swap the whole thing over in one go (more or less like I did with Maniphest) but we have a ton of custom fields and things felt really shaky and the change was enormous and hard to keep track of.
Instead, I'm going to do this more gradually and go field-by-field. This implements a CustomField version of the "Title" field.
(There are no links to this in the UI.)
Test Plan:
{F115353}
{F115354}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886
Differential Revision: https://secure.phabricator.com/D8276
Summary: ...do it somewhat generically, so we could fairly easily add this to other applications. Fixes T3496. I got a wee bit lazy and decided not to migrate existing drafts. My excuses aside from laziness are doing it this way will let us see if anyone complains, we can always do a migration later if people do complain, and there's likely to be a lot of garbage data for older / bigger installs, and the migration didn't seem worth itgiven it would also likely be expensive in these cases.
Test Plan: made a draft inline comment on DX and observed DX had a note icon on Differential home page. made a draft comment on DX and observed DX had a note icon on Differential home page. deleted a draft inline comment and noted icon disappeared from Differential homepage. Submitted a draft comment + inline comment and noted icon disappeared.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3496
Differential Revision: https://secure.phabricator.com/D8275
Summary:
Ref T1812. This cleans up most of the easy hard-coded references to specific statuses:
- The "fixes" language moves into ManiphestTaskStatus.
- Add a method to list open statuses.
- Add a method to test if a status is open.
- Add a method to get default status for new tasks.
Test Plan: Browsed around, lint, grep, created, filtered and updated tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8264
Summary: Fixes T3872. Ref T1812. Ref T3886. Modernize the "closes x as y" string parser, and use all the new parsers instead of the old ones.
Test Plan: Made a commit full of a pile of these trigger strings, then used `scripts/repository/reparse.php --message` to reparse it. Verified that parses came back as expected using a bunch of `var_dump()`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1812, T3872, T3886
Differential Revision: https://secure.phabricator.com/D8263
Summary:
Ref T3886. See D8261. This brings the "reverts x" phrase to modern infrastructure. It isn't actually called by the real parser yet, I'm going to do that in one go at the end so I can test everything more easily.
This had unit tests; port most of them forward.
Test Plan: Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886
Differential Revision: https://secure.phabricator.com/D8262
Summary:
Ref T3886. Ref T3872. Ref T1812. We have several parsers which look for textual references to other objects, like:
Closes Tx.
Depends on Dy.
Reverts Dz.
Currently, these are pretty hard coded, don't get all the edge cases right, and don't generalize well. They're also implemented in the middle of Differential's field code. So I want to:
- Share more code so that, e.g., "Tx, Ty" always works (only some rules support it right now);
- fix bugs in the parser, like T3872;
- make this a modular, extensible process which runs against custom fields, not a builtin part of fields;
- make the internals more flexible to accommodate custom stuff like T1812.
This implements the "Verbs optional-noun Object, Optional Other Objects optional-as-something." grammar in a general way so subclasses can just plug in their keywords. Runtime code doesn't touch this yet.
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3872, T1812, T3886
Differential Revision: https://secure.phabricator.com/D8261
Summary:
Ref T2222. I want to stage a "later" patch to drop this column, but get rid of the last few references to it.
One of these methods has no callers, and the other stuff I've updated to use the modern fields.
Test Plan: Created some inlines, hit "edit", submitted them, `grep.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8240
Summary: Ref T2222. Use new code for rendering. Delete `DifferentialRevisionCommentView`, which has no remaining callsites.
Test Plan: Went through all the different actions and verified the previews rendered correctly. Reloaded page to test draft behavior.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8236
Summary:
Ref T4420. Tokenizers currently operate in "preload" or "ondemand" modes. In the former mode, which is default, they'll try to load the entire result list when a page loads.
The theory here was that this would slightly improve the experience for small installs, and once they got big enough they could switch to "ondemand". In practice, several issues have arisen:
- We generally don't have a good mechanism for telling installs that they should tweak perf config -- `metamta.send-immediately` is the canonical example here. Some large installs are probably affected negatively by not knowing to change this setting, and having settings like this is generally annoying.
- We have way way too much config now.
- With the advent of ApplicationSearch, pages like Maniphest make many redundant loads to prefill sources like projects. Most of the time, this data is not used. It's far simpler to switch everything to ondemand than try to deal with this, and dealing with this would mean creating two very complex divergent pathways in the codebase for a mostly theoretical performance benefit which only impacts tiny installs.
- We've been using `tokenizer.ondemand` forever on `secure.phabricator.com` since we have many thousands of user accounts, and it doesn't seem sluggish and works properly.
Removing this config is an easy fix which makes the codebase simpler.
I've retained the ability to use preloaded sources, since they may make sense in some cases (in at least one case -- task priorities -- adding a static source pathway might make sense), and they're part of Javelin itself. However, the code will no longer ever go down that pathway.
Test Plan: Used `secure.phabricator.com` for years with this setting enabled.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8232
Summary: I assume this box is always after timeline
Test Plan: test a diff or two
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8230
Summary: Ref T2222. Restore this funky is-visible / inline-is-elsewhere logic.
Test Plan: Updated a revision, saw all the inlines render properly when looking at various diffs and versus-diffs. Clicked inline links.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8224
Summary: Ref T2222. Once these are live, yell if any of them seem off. I tried to mostly stay consistent-ish with what we had before.
Test Plan: Looked at a bunch of revisions and saw more detailed, colorful transactions.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8223
Summary: Ref T2222. These don't work yet. We just have to copy a couple fields, but let's sort that out later since this is purely a new feature.
Test Plan: Looked at a revision, no edit links.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8222
Summary: Ref T2222. This is a `tmp.differential`-only issue. Inline comment transactions now have content, so we treat them like body text. We also render them separately as inline text. This produces mail where inlines are rendered twice.
Test Plan: Sent myself mail, saw only one copy of inlines.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8216
Summary:
Ref T2222. This gets rid of Differential's custom view and uses a standard view instead.
This also mostly fixes the rendering logic for inlines.
This is headed to the `tmp.differential` branch.
Test Plan: {F112696}
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T1790, T2222
Differential Revision: https://secure.phabricator.com/D8215
Summary: Ref T2222. On the `tmp.differential` branch, we're currently having
issues parsing commits which reference Differential revisions, because the
"user closed this revision (closed by commit xyz)" message is fataling:
[2014-02-13 14:12:36] EXCEPTION: (PhutilProxyException) Error while
executing task ID 345358 from queue. {>} (AphrontQueryException)
#1048: Column 'contentSource' cannot be null
Specifically, the MessageParser pathway for CommentEditor doesn't set a content
source. Make sure CommentEditor always sets a content source.
(This is also causing a buildup of diffs on D8212 and D8211.)
Auditors: btrahan
Summary:
Ref T2222. This is the big one.
This migrates each `DifferentialComment` to one or more ApplicationTransactions (action, cc, reviewers, update, comment, inlines), and makes `DifferentialComment` a double-reader for ApplicationTransactions.
The migration is pretty straightforward:
- If a comment took an action not otherwise covered, it gets an "action" transaction. This is something like "epriestley abandoned this revision.".
- If a comment updated the diff, it gets an "updated diff" transaction. Very old transactions of this type may not have a diff ID (probably only at Facebook).
- If a comment added or removed reviewers, it gets a "changed reviewers" transaction.
- If a comment added CCs, it gets a "subscribers" transaction.
- If a comment added comment text, it gets a "comment" transaction.
- For each inline attached to a comment, we generate an "inline" transaction.
Most comments generate a small number of transactions, but a few generate a significant number.
At HEAD, the code is basically already doing this, so comments in the last day or two already obey these rules, roughly, and will all generate only one transaction (except inlines).
Because we've already preallocated PHIDs in the comment text table, we only need to write to the transaction table.
NOTE: This significantly degrades Differential, making inline comments pretty much useless (they each get their own transaction, and don't show line numbers or files). The data is all fine, but the UI is garbage now. This needs to be fixed before we can deploy this to users, but it's easily separable since it's all just display code.
Specifically, they look like this:
{F112270}
Test Plan:
I've migrated locally and put things through their paces, but it's hard to catch sketchy stuff locally because most of my test data is nonsense and bad migrations wouldn't necessarily look out of place.
IMPORTANT: I'm planning to push this to a branch and then shift production over to the branch, and run it for a day or two before bringing it to master.
I generally feel good about this change: it's not that big since we were able to separate a lot of pieces out of it, and it's pretty straightforward. That said, it's still one of the most scary/dangerous changes we've ever made.
Reviewers: btrahan
CC: chad, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8210
Summary: Ref T2222. A few rendering interfaces rely on fishing the revision ID out of a DifferentialComment, but it will only have the PHID soon. Pass in the revision and use it to determine the ID instead.
Test Plan: Browsed, previewed, examined comments. Clicked anchors.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8209
Summary:
Ref T2222. I wiped out the Differential-specific stats page a long time ago, but missed this. It turned up recently in `grep`.
Facts will eventually fill this role; this code is unreachable; it probably doesn't work now and definitely won't work in a day or two after ApplicationTransactions.
Test Plan: Used `grep` to look for callsites.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8208
Summary: Ref T2222. We need this `clone` when constructing the new multi-comments in Differential, or we get double-comments internally. This shows up as emails with double comment text.
Test Plan: Sent some "Accept + comment" emails, only one comment in the body.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8206
Summary:
Ref T2222. Ref T4415. We're still writing Differential subscription stuff into this weird legacy `differential_relationship` table, which is like an edge table but extremely ancient.
Move it into a proper table.
I've removed `withSubscriptions()` from `DifferentialRevisionQuery`. It was weird, doesn't work consistently with other similar filters, and was only used by the API. Now it means "ccs", which is consistent with the ApplicationSearch UI and with Maniphest.
Test Plan:
Without migrating, added and removed subscribers via various workflows. Queried for subscribers. Everything worked as expected.
Ran the migration, verified data survived.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Maniphest Tasks: T2222, T4415
Differential Revision: https://secure.phabricator.com/D8202
Summary:
See D8200. Ref T2222. Instead of writing one comment which can have a ton of different effects, write a series of one-effect comments. These will be easier to convert into ApplicationTransactions.
This has a minor user-facing effect of making these multiple-action comments render separately:
{F111919}
Once the migration completes, they should automatically merge together nicely again.
Test Plan: Made a bunch of comments and took a bunch of actions, all of which worked normally except that they rendered as several things instead of just one.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, FacebookPOC
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8201
Summary:
Ref T2222. Instead of writing one comment which performs both a diff update and adds a comment, write two comments, one for each action. These will translate directly into ApplicationTransactions writes.
This has a small impact on the UX: these updates now render in two rows, instead of one. After T2222, they'll automerge back together.
{F111909}
Test Plan: Updated a revision.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8200
Summary:
Ref T2222. Currently, one `DifferentialComment` can do a lot of things (add ccs, reviewers, comments, inline comments, and perform state changes). In the future, each `ApplicationTransaction` does only one thing. This is the primary piece of complexity which makes the upcoming migration risky, because each comment needs to migrate into multiple transactions.
I want to mitigate this complexity as much as possible before the migration itself happens. One approach I'm going to use to do that is to start writing one comment per effect now, so the mapping is more direct when the migration itself happens and the write code can be straightforward (one row per save()) after the migration.
This tackles a small piece of that, which is the mail Differential sends. Currently, Differential mail acts on a single comment. Instead, allow it to act on a list of comments, but always give it one comment for now. In the future, we can hand it several comments instead and still get the expected behavior.
This change should have no impact on any application behaviors.
Test Plan:
- Commented;
- commented with inline;
- added reviewers;
- added CCs;
- added CCs via mentions;
- updated revision;
- looked at all the mail, all of which seemed sane.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8199
Summary:
Ref T2222. Currently, `DifferentialComment` stores both (a) the text of comments and (b) various other transaction details. This data needs to map to both Transactions and TransactionComments in the long run. This diff separates out all the data which is bound for the TransactionComment table, so that when we migrate `DifferentialComment` itself it will //only// need to migrate into the Transactions table. This is a much simpler migration than the inline comment one was, partly because it set up infrastructure and partly because the data is less complex.
Basically, I'm just proxying the read/write for the comment text into the other table. All readers already go through the Query class, and there are only three writers (preview, comment, implicit comment on diff update) which are all highly regular and straightforward to test.
We can also back out of this diff very easily: doing double writes cost only one line of code (`$this->content = $content;`) so we have proper double writes and a trivial revert path.
Test Plan:
- Without migrating, added comments and saw them show up.
- Migrated.
- Saw all the old comments, and no damage to the new ones.
- Added new comments.
- Used comment preview.
- Updated a revision to implicitly create an update comment and verified it looked OK.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8196
Summary: I don't think this is too terrible, and makes the future easier? Maybe?
Test Plan: ALLCAPS translation, Viewed a diff, feed, and notifications.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8175
Summary: ...and surface it in all adapters except commit adapters. Values are true or false. Ref T4294
Test Plan: made a herald rule to be cc'd on new tasks. was cc'd on new tasks and not cc'd on updates to existing tasks.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4294
Differential Revision: https://secure.phabricator.com/D8142
Summary: Ref T4365. Two diffs from now, I'm changing the UI a bit to let you search for closed and unowned documents more explcitly. To support this in ElasticSearch and more easily in MySQL search, make these explicit, positive relationships.
Test Plan: `bin/search index --all`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4365
Differential Revision: https://secure.phabricator.com/D8122
Summary:
Fixes T4066.
add `isActionDisabled()` to DifferentialLandingStrategy, which also explains why it is so.
Make an appropriate pop-up in the controller.
Also make the whole UI "workflow", and convert `createMenuItems()` to `createMenuItem()` (Singular).
Test Plan: Click "Land to..." button in all kinds of revisions.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4066
Differential Revision: https://secure.phabricator.com/D8105
Summary: Policies are now fully supported in Differential.
Test Plan: Grepped for other caveats, looks like I've already removed htem all.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D8095
Summary:
Moves away from ArcanistProjects:
- Adds storage for diffs to be directly associated with a repository (instead of indirectly, through arcanist projects). Not really populated yet.
- Drops `parentRevisionID`, which is obsoleted by the "Depends On" edge. This is not exposed in the UI anywhere and doesn't do anything. Resolves TODO.
Test Plan: Ran storage upgrades, browsed around, lots of `grep`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8072
Summary: Add the arc project and branch fields in emails for revisions under review. I am not quite sure why we only show them for changes which is already accepted or needs revision. It would be nice to have them for changes under review too.
Test Plan: Create a new revision and check email
Reviewers: epriestley, lifeihuang, JoelB, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8035
Summary: This modularizes the rest of the GC submethods. Turned out there was nothing tricky.
Test Plan: Ran `bin/phd debug garbage` and got reasonable looking behavior and output.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7971
Summary: Fixes T4317. Update the "inline comment" control to a RemarkupControl. This could maybe use some padding/spacing/design touches eventually but seems OK for the moment.
Test Plan: {F101825}
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T4317
Differential Revision: https://secure.phabricator.com/D7969
Summary: Fixes T3857. Earlier work made this trivial and just left product questions, which I've answered by requiring the daemons to run on reasonable installs.
Test Plan: Ran `bin/search index` and `bin/search index --background`. Observed indexes write in the former case and tasks queue in the latter case. Commented with a unique string on a revision and searched for it a moment later, got exactly one result (that revision), verifying that reindexing works correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7966
Summary: Cleans up some older layouts to new stuffs.
Test Plan: Test with and without a diff ID.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7949
Summary: This removes the bulk of the "Form Errors" text, some variations likely exists. These are a bit redundant and space consuming. I'd also like to back ErrorView more into PHUIObjectBox.
Test Plan: Test out the forms, see errors without the text.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran, hach-que
Differential Revision: https://secure.phabricator.com/D7924
Summary:
Via Asana. The tags on Differential mail are wrong in two cases:
- Transactions which submit inline comments but no comment text are not labeled as "comments", but should be.
- Non-close, non-comment transactions are not labeled at all, but should be labeled "other".
Test Plan: Submitted a no-comments, inlines-only transaction and got a message with proper `X-Phabricator-Mail-Tags` header.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7912
Summary: Two basic changes here, first we fixed up the Diffusion headers to roll out more PHUIObjectBoxes. Second we added some specific styles for when Errors are inside an ObjectBox at the first position.
Test Plan: Tested a number of different layouts for browsing respositories as well as wherever I could find cases with PHUIObjectBox Form Errors (see images attached). Still some minor tightening due after this diff, but didnt want to overload it.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7914
Summary:
Ref T4222. Currently, CelerityResourceResponse holds response resources in flat maps. Instead, specify which map resources appear in.
Also, provide `requireResource()` and `initBehavior()` APIs on the Controller and View base classes. These provide a cleaner abstraction over `require_celerity_resource()` and `Javelin::initBehavior()`, but are otherwise the same. Move a few callsites over.
Test Plan:
- Reloaded pages.
- Browsed around Differential.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7876
Summary:
If the repo isn't bare, than we need copy it's remote instead of using it.
This will probably not work if an SSH key is provided to phabricator, and in any case you must delete
all workspaces that were already created.
This will make landing those repos slower; I plan to just delete and re-clone all repos on my instance.
It will probably be simpler to just make a bare-repo a requirement of all the git-landing work.
Test Plan: landed from hosted and un-hosted repos, checked git-remote url in each newly cloned workspace.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7592
Summary:
Fixes T4270. When you download raw file content, diffs, and patches we currently give them default (all users) visibility.
Instead, bind them to the repository or revision in question.
(This code could use a bit of cleanup at some point.)
Test Plan: Hit the patch and content download links in Diffusion and the patch download link in Differential, got restricted files with accurate policy bindings.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4270
Differential Revision: https://secure.phabricator.com/D7849
Summary:
Ref T1049. Adds `bin/harbormaster` and `bin/harbormaster build` for applying plans from the console. Since this gets `--trace`, it's much easier to debug what's going on.
This doesn't work properly with some of the Drydock steps yet, I need to look at those. I think `setRunAllTasksInProcess` probably obsoletes some of the mechanisms. It might also not work with "Wait for Builds" but I didn't check.
Test Plan: Used `bin/harbormaster` to run a bunch of builds. Ran builds from web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7825
Summary: We currently have a lot of calls to `addCrumb(id(new PhabricatorCrumbView())->...)` which can be expressed much more simply with a convenience method. Nearly all crumbs are only textual.
Test Plan:
- This was mostly automated, then I cleaned up a few unusual sites manually.
- Bunch of grep / randomly clicking around.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7787
Summary:
These just got copy/pasted like crazy, the base class has the correct default implementation.
(I'm adding "H" for Herald Rules, which is why I was in this code.)
I also documented the existing prefixes at [[ Object Name Prefixes ]].
Test Plan: Verified base implementation. Typed some object names into the jump nav.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7785
Summary:
Ref T1715. When the user clicks "Download Raw Diff" in Differential, we try to build a diff of exactly what they're seeing. However:
- This doesn't work if any of the changes have multiple hunks, and fixing it seems hard.
- I suspect this diff is never actually useful anyway? And probably kind of confusing in the best case. You can't really apply it to anyhting, since you'd have to apply another diff first.
Instead, just build the right-side diff, which should align well with user expectation and doesn't suffer from the multi-hunk bug.
Some day, we could maybe add some of the fancy options in T1715.
See: <https://github.com/facebook/phabricator/issues/461>
Test Plan: Downloaded a multi-hunk diff, got the original back and applied it cleanly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1715
Differential Revision: https://secure.phabricator.com/D7694
Summary: See D7653. This is exclusively for Asana, who uses Differential for a post-commit, Audit-like workflow but has a small set of requirements for it to be a good fit (just this) and a large set of requirements for Diffusion/Audit to be a good fit.
Test Plan: Set the flag, verified "Accepted" revisions are no longer on the dashboard.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7654
Summary:
Currently, "Closed" and "Abandoned" are treated as "closed". I want to add a flag which treats "Accepted" as "Closed", too, for Asana and other companies who use an Asana-like workflow.
The background here is that their workflow is a bit weird. They basically do audits, but have a lot of things which Diffusion doesn't do well right now. This one change makes Differential fit their workflow fairly well, even though it's an audit workflow.
To prepare for this, normalize the definition of "closed" better. We have a few callsites which explicitly check for "ABANDONED || CLOSED", and normalizing this is cleaner anyway.
Also delete the very old COMMITTED status, which has been obsolete for over a year.
Test Plan: Browsed around most/all of the affected interfaces.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7653
Summary: Fixes T3687. Instead of rendering "JIRA Issues" in Differential using plain links, render them using Doorkeeper tags so they get the nice "enhance with object name" effect.
Test Plan: {F84886}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D7648
Summary:
We've been having trouble with viewing diffs timing out when there's a lot of unit test failures. It was caused by formatting userdata for every single failure. The expensive part of this was actually creating the engine for every result, so moved the construction outside of the loop.
Diffs that timed out (2 min) loading before load in around 6 seconds now.
Test Plan: Loaded diffs that used to time out. Verified that details still looked right when Show Full Unit Test Results Is Clicked.
Reviewers: epriestley, keegancsmith, lifeihuang, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, andrewjcg
Differential Revision: https://secure.phabricator.com/D7581
Summary:
Fixes T4109. If a revision has a bad `repositoryPHID` (for example, because the repository was deleted), `DifferentialRevisionQuery` calls `didRejectResult()` on it, which raises a policy exception, even if the viewer is omnipotent. This aborts the `MessageParser`, because it does not expect policy exceptions to be raised for an omnipotent viewer.
Fix this in two ways:
# Never raise a policy exception for an omnipotent viewer. I think this is the expected behavior and a reasonable rule.
# In this case, load the revision for an omnipotent viewer.
This feels a little gross, but it's the only place where we do this in the codebase right now. We can clean this up later on once it's more clear what the circumstances of checks like these are.
Test Plan: Set a revision to have an invalid `repositoryPHID`, ran message parser on it, got a clean parse.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4109
Differential Revision: https://secure.phabricator.com/D7603
Summary:
A usable, Land to GitHub flow.
Still to do:
- Refactor all git/hg stratagies to a sane structure.
- Make the dialogs Workflow + explain why it's disabled.
- Show button and request Link Account if GH is enabled, but user is not linked.
- After refreshing token, user ends up in the settings stage.
Hacked something in LandController to be able to show an arbitrary dialog from a strategy.
It's not very nice, but I want to make some more refactoring to the controller/strategy/ies anyway.
Also made PhabricatorRepository::getRemoteURIObject() public, because it was very useful in getting
the domain and path for the repo.
Test Plan:
Went through these flows:
- load revision in hosted, github-backed, non-github backed repos to see button as needed.
- hit land with weak token - sent to refresh it with the extra scope.
- Land to repo I'm not allowed - got proper error message.
- Successfully landed; Failed to apply patch.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D7555
Summary:
Fixes T3034. This is obsoleted by modern policies.
This was written by a Facebook intern and is rarely used -- the Hive install might be the only use in the wild. It has never really worked correctly.
Test Plan: `grep`; browsed Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3034
Differential Revision: https://secure.phabricator.com/D7568
Summary: Fixes T3535. Also, flip flop on that spacing thing and make the spaces purdy
Test Plan: got an arcanist projected phid in the json dict
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3535
Differential Revision: https://secure.phabricator.com/D7565
Summary:
Depends on D7500.
This seemed like a pretty good idea once I thought of it. Instead of having some custom triggering logic instead Harbormaster, I figured it best to leverage all of Herald's power so that users can create rules to apply builds to commits and differential revisions. This gives the added advantage that they can trigger off builds for particular types of revisions and commits, which seems like it could be really useful (e.g. run extra tests against revisions that touch sensitive areas of the code).
Test Plan: Ran the usual daemons + the Harbormaster daemon. Pushed a commit to the repository and saw both the buildable and build get created when the commit worked picked it up. Submitted a diff and saw both the buildable and build get created when the Herald rules were evaluated for the diff.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, hwinkel
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7501
Summary: I've kept this as close as possible to the Git version for ease of review and later refactoring of them both together. At minimum, the functions to get the working dir should probably be cleaned up one day.
Test Plan: Landed a revision.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7534
Summary:
Ref T1049. Ref T2222. `DifferentialDiff` does not currently have a PHID, but we need it for Harbormaster and ApplicationTransactions. See some discussion in D7501.
(I split the SQL into two sections so we can't fail in the middle. At some point, I'd like to do a pass on the migration stuff and get this happening automatically, and also simplify the PatchList.)
Test Plan:
- Ran `bin/storage upgrade`.
- Checked for valid PHIDs in the database.
- Used `phid.query` to look up a diff by PHID.
- Created a new diff and verified it got a PHID.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran, vrana
Maniphest Tasks: T2222, T1049
Differential Revision: https://secure.phabricator.com/D7513
Summary:
ref T182.
Simple approach of clone, patch, push. While waiting for drydock, implement a hackish mutex
setup for the workspace, which should work ok as long as there's only one committer who is
carefull about theses things.
Less obvious note: This is taking the both author and commiter's 'primary email' for the commit -
which might rub some people wrong.
Test Plan:
With a hosted repo, created some diffs and landed them.
Also clicked button for some error cases, got the right error message.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: hach-que, Korvin, epriestley, aran
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D7486
Summary: The idea is to have all `phtize` definitions in applications to allow their separation.
Test Plan: Clicked View Options after mangling the translation.
Reviewers: epriestley
Reviewed By: epriestley
CC: btrahan, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7345
Summary: Adds summary (description) and test plan icons to make these area's more unique and differentiated over general sections.
Test Plan: Test a diff, a commit, a task
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7493
Summary:
I pulled these into the property list recently, which made them more consistent, but that dropped "preserve linebreaks". Since these usually come from the CLI, render with linebreaks preserved.
@csilvers, you'll need to `bin/cache purge --purge-remarkup` after this if you want to fix existing revisions.
Test Plan: Made a revision with some poetry, saw poetry preserved.
Reviewers: btrahan, csilvers
Reviewed By: btrahan
CC: csilvers, aran
Differential Revision: https://secure.phabricator.com/D7464
Summary: Updates the review status list to align better inside property lists. Alsu uses the default colors a bit more. This removes an overflow hidden on the value side, but that shouldnt cause any issues, given it has plenty of space.
Test Plan: tested differential and audit, highlighted and not.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7441
Summary: See title. Fixes T1809.
Test Plan:
verified each type that has flaggable interface still can be flagged
verified that new custom query filter works
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1809
Differential Revision: https://secure.phabricator.com/D7392
Summary:
Gets rid of some old Differential-specific nonsense and replaces it with general runtime-pluggable Remarkup rules.
Facebook: This removes two options which may be in use. Have any classes being added via config here just subclass the new abstract bases instead. This should take 5 seconds to fix. You can adjust order by overriding `getPriority()` on the rules, if necessary.
Test Plan: See comments.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, andrewjcg, aran
Differential Revision: https://secure.phabricator.com/D7393
Summary:
While we mostly have reasonable effective object accessibility when you lock a user out of an application, it's primarily enforced at the controller level. Users can still, e.g., load the handles of objects they can't actually see. Instead, lock the queries to the applications so that you can, e.g., never load a revision if you don't have access to Differential.
This has several parts:
- For PolicyAware queries, provide an application class name method.
- If the query specifies a class name and the user doesn't have permission to use it, fail the entire query unconditionally.
- For handles, simplify query construction and count all the PHIDs as "restricted" so we get a UI full of "restricted" instead of "unknown" handles.
Test Plan:
- Added a unit test to verify I got all the class names right.
- Browsed around, logged in/out as a normal user with public policies on and off.
- Browsed around, logged in/out as a restricted user with public policies on and off. With restrictions, saw all traces of restricted apps removed or restricted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7367
Summary:
Ref T2222. Shrink the API to make it easier to move this object's storage to ApplicationTransactions.
Fixes T3415. This moves the "Summary" and "Test Plan" into the property list, and thereby fixes all the attribution problems associated with commandeering, creating a revision from another user's diff, etc.
Test Plan: Browsed several revisions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3415, T2222
Differential Revision: https://secure.phabricator.com/D7375
Summary:
Fixes T3675.
- Maniphest had a couple of old non-event listeners; move them to events.
- Make most of the similar listeners a little more similar.
- Add checks for access to the application.
Test Plan:
- Viewed profile, project, task, revision.
- Clicked all the actions.
- Blocked access to various applications and verified the actions vanished.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3675
Differential Revision: https://secure.phabricator.com/D7365
Summary:
Ref T3675. Some of these listeners shouldn't do their thing if the viewer doesn't have access to an application (for example, users without access to Differential should not be able to "Edit Tasks"). Set the stage for that:
- Introduce `PhabricatorEventListener`, which has an application.
- Populate this for event listeners installed by applications.
- Rename the "PeopleMenu" listeners to "ActionMenu" listeners, which better describes their modern behavior.
This doesn't actually change any behaviors.
Test Plan: Viewed Maniphest, Differntial, People.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3675
Differential Revision: https://secure.phabricator.com/D7364
Summary: Ref T1279. The new stuff seems stable, so stop writes to the old tables.
Test Plan:
- Added and removed reviewers.
- Grepped for `::RELATIONSHIP_TABLE` to verify we really have no more reads.
- Grepped for `::RELATION_REVIEWER`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7360
Summary: Fixes T4001. I broke this some time ago and no one has complained. I don't think it gets much use, and we haven't added it for the newer apps. Just get rid of it rather than adapt the URIs for ApplicationSearch.
Test Plan: Unit tests, sent myself some email.
Reviewers: zeeg, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4001
Differential Revision: https://secure.phabricator.com/D7355
Summary: Fixes T3898. This feature needs generalization at some point, but just unbreak it for now since a surprising number of users like it.
Test Plan: Pressed "z".
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran, spicyj
Maniphest Tasks: T3898
Differential Revision: https://secure.phabricator.com/D7366
Summary:
Ref T2222. This implements step (1) described there, which is moving over all the inline comments.
The old and new tables are simliar. The only real trick here is that `transactionPHID` and `legacyCommentID` mean roughly the same thing (`null` if the inline is a draft, non-null if it has been submitted) but we don't have real `transactionPHID`s yet. We just make some up -- we'll backfill them later.
Two risks here:
- I need to take a second look at the keys on this table. I think we need to tweak them a bit, and it will be less disruptive to do that before this migration than after.
- This will take a while for Facebook, and other large installs with tens of thousands of revisions. I'll communicate this.
I'm otherwise pretty satisfied with this, seems to work well and is pretty low risk / non-disruptive.
Test Plan:
- Before migrating, then after migrating:
- Made a bunch of inlines (drafts, submitted).
- Edited and deleted inlines.
- Verified inlines showed up in preview.
- Verified that inlines aren't indexed when they're drafts (`bin/search index D935`).
- Verified that inlines ARE indexed when they're not drafts.
- Verified that drafts inlines make revisions appear as "with draft" in the revision list.
- Made left, right, and draft inlines.
- Migrated (`bin/storage upgrade`).
- Verified that my inlines from before the migration still showed up.
- (Repeated all the stuff above.)
- Manually inspected the inline comment table.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D7139
Summary:
I refactored this recently and accidentally dropped the download URI.
Also fix a warning with, e.g., files named `README`.
Test Plan: Clicked a thumb, clicked "Download", got a file.
Reviewers: chad, btrahan, dctrwatson
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7341
Summary: Adds filetype icons, applying to differential file headers. The main issue is with all the lightening, I wanted something to still anchor 'new file' on the page and adding a sharp icons does that pretty well for me. Feedback is cool too.
Test Plan: Add some new icons, test in previous commits.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7320
Summary:
Ref T603. This cleans up an existing callsite in the policy filter, and opens up some stuff in the future.
Some policy objects don't have real PHIDs:
PhabricatorTokenGiven
PhabricatorSavedQuery
PhabricatorNamedQuery
PhrequentUserTime
PhabricatorFlag
PhabricatorDaemonLog
PhabricatorConduitMethodCallLog
ConduitAPIMethod
PhabricatorChatLogEvent
PhabricatorChatLogChannel
Although it would be reasonable to add real PHIDs to some of these (like `ChatLogChannel`), it probably doesn't make much sense for others (`DaemonLog`, `MethodCallLog`). Just let them return `null`.
Also remove some duplicate `$id` and `$phid` properties. These are declared on `PhabricatorLiskDAO` and do not need to be redeclared.
Test Plan: Ran the `testEverythingImplemented` unit test, which verifies that all classes conform to the interface.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7306
Summary: This builds out and implements PHUIPropertyListView (container) and PHUIPropertyListItemView (section) as well as adding tabs.
Test Plan: Tested each page I edited with the exception of Releeph and Phortune, though those changes look ok to me diff wise. Updated examples page with tabs.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7283
Summary: Ref T603. Currently, we hard-code defense against setting policies to "Public" in several places, and special case only the CAN_VIEW policy. In fact, other policies (like Default View) should also be able to be set to public. Instead of hard-coding this, move it to the capability definitions.
Test Plan: Set default view policy in Maniphest to "Public", created a task, verified default policy.
Reviewers: btrahan, asherkin
Reviewed By: asherkin
CC: asherkin, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7276
Summary:
Ref T603. Allows the Differential view policy to be configured with a default.
I've omitted "edit" because I want to wait and see how comment/comment-action policies work out. I could imagine locking "edit" down to only the owner at some point, and providing a wider "interact" capability, or something like that, which would cover accept/reject/commandeer. Users in this group could still edit indirectly by commandeering first.
Test Plan: Created new revisions from the CLI and conduit.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7269
Summary:
Ref T603. I want to let applications define new capabilities (like "can manage global rules" in Herald) and get full support for them, including reasonable error strings in the UI.
Currently, this is difficult for a couple of reasons. Partly this is just a code organization issue, which is easy to fix. The bigger thing is that we have a bunch of strings which depend on both the policy and capability, like: "You must be an administrator to view this object." "Administrator" is the policy, and "view" is the capability.
That means every new capability has to add a string for each policy, and every new policy (should we introduce any) needs to add a string for each capability. And we can't do any piecemeal "You must be a {$role} to {$action} this object" becuase it's impossible to translate.
Instead, make all the strings depend on //only// the policy, //only// the capability, or //only// the object type. This makes the dialogs read a little more strangely, but I think it's still pretty easy to understand, and it makes adding new stuff way way easier.
Also provide more context, and more useful exception messages.
Test Plan:
- See screenshots.
- Also triggered a policy exception and verified it was dramatically more useful than it used to be.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7260
Summary: Ref T1279. Prerequisite for adding icons or other type information to tokenizers, since we don't currently have enough information to prefill them when rendering things from the server side. By passing handles in, the tokenizer can extract type information.
Test Plan:
- Searched by user in Audit.
- Sent Conpherence from profile page.
- Tried to send an empty conpherence.
- Searched Countdown by user.
- Edited CCs in Differential.
- Edited reviewers in Differential.
- Edited a commit's projects.
- Searched lint by owner.
- Searched feed by owner/project.
- Searched files by owner.
- Searched Herald by owner.
- Searched Legalpad by owner.
- Searched Macro by owner.
- Filtered Maniphest reports by project.
- Edited CCs in Maniphest.
- Searched Owners by owner.
- Edited an Owners package.
- Searched Paste by owner.
- Searched activity logs by owner.
- Searched for mocks by owner.
- Edited a mock's CCs.
- Searched Ponder by owner.
- Searched projects by owner.
- Edited a Releeph project's pushers.
- Searched Releeph by requestor.
- Edited "Uses Symbols" for an Arcanist project.
- Edited all tokenizers in main search.
- Searched Slowvote by user.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7248
Summary: Ref T603. We currently bomb out here, but should just continue forward. I'm fairly certain we don't even use this for anything anymore (it has been replaced by "depends on") but need to check that.
Test Plan: Created a new revision with `arc diff`.
Reviewers: ljalonen, btrahan, #blessed_reviewers, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7255
Summary:
Ref T1279. This is a logical change.
- "Reject" (nee "Request Changes") is now sticky. The review won't transition to "Accepted" until the reviewer clears their objection. In practice, I think it always worked like this anyway (without technical enforcement, users just followed this rule naturally, since disobeying this rule is kind of a dick move) so I don't expect this to change much. I think this rule is easier to understand than the old rule now, given the multi-reviewer status and blocking reviewers.
- "Blocking Reviewer" and "Reject" now prevent a revision from transitioning to "Accepted". When reviewers accept, resign, or are removed, we do a check to see if the reivsion has: at least one user reviewer who has accepted; zero rejects; and zero blocks. If all conditions are satisfied, we transition it to "accepted".
Practically, the primary net effect of this is just to make blocking reviews actually block.
This is pretty messy, but there's not much we can do about it until after T2222, since we have two completely separate editor pathways which are both responsible for adjusting status. Eventually, these can merge into a single sane editor which implements reasonable rules in reaonable ways. But that day is not today.
Test Plan: With three users and a project, made a bunch of accepts, rejects, resigns and reviewer removals. I think I probably covered most of the pathways? There are a lot of interactions here.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, wisutsak.jaisue.7
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7245
Summary: Ref T1279. These reviewers don't actually create a logical block yet (that is, revisions still transition to "accepted" even in their presence), but this handles everything except that.
Test Plan: Added Herald rules and updated revisions; see screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7244
Summary:
Ref T1279. With the new per-reviewer status, you can always accept or reject a revision.
This is primarily cosmetic/UI changes. In particular, you've always been able to reject a rejected revision, the UI just didn't show you an option.
Test Plan: Accepted accepted revisions; rejected rejected revisions. See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7243
Summary: Ref T1279. If you accept a revision, also accept on behalf of all the projects you have authority to accept for.
Test Plan:
- Accepted a revision which I was a reviewer on, saw my own status and an authority project's status change to "Accepted".
- Accepted a revision which I was not a reviewer on, saw my own status be added (as "Accepted") and the project's status update.
Also, see screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, wisutsak.jaisue.7
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7242
Summary:
Ref T1279. We currently determine reviewers at display time, but this is bad for several reasons:
- It puts queries very close to the display layer.
- We have to query for each revision if we want to figure out authority for several.
- We need to figure it out in several places, so we'll end up with copies of this logic.
- The logic isn't trivial (exceptions for the viewer, exceptions to that rule for install configuration).
- We already do this "figure it out when we need it" stuff in Diffusion for audits and it's really bad: we have half-working copies of the logic spread all over the place.
Instead, put it in the Query. Callers query for it and get the data attached to the reviewer objects.
Test Plan:
- Looked at some revisions, verified the correct lines were highlighted.
- Looked at a revision I created and verified that projects I was a member of were not highlighted.
- With self-accept enabled, these //are// highlighted.
- Looked at a revision I did not create and verified that projects I was a member of were highlighted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7241
Summary: Ref T1279. No logical changes, but cosmetically highlight stuff you have authority for, like we do in Diffusion.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7237
Summary:
Ref T1279. Although I think this is a bad idea in general (we once supported it, removed it, and seemed better off for it) users expect it to exist and want it to be available. Give them enough rope to shoot themselves in the foot.
I will probably write some lengthy treatise on how you shouldn't use this rule later.
Implementation is straightforward because Differential previously supported this rule.
This rule can also be used to add project reviewers.
Test Plan: Made some "add reviewers" rules, created revisions, saw reviewers trigger.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7235
Summary: Ref T1279. Show separate sections for "Reviewers" and "Project Reviewers" (Differential) and for "Auditors" and "Package/Project Auditors" (Diffusion/Audit).
Test Plan:
- Looked at a commit. Saw separation.
- Looked at a revision. Saw separation.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7233
Summary:
Ref T1279. Two changes to the search/query for Differential:
- "Reviewers" now accepts users and projects.
- "Responsible Users" now includes revisions where a project you are a member of is a reviewer.
Test Plan:
- Searched for project reviewers.
- Verified that the dashboard now shows reviews which I'm only part of via project membership.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7231
Summary:
Ref T1279. No actual logical changes, but:
- You can now add projects as reviewers from the revision view typeahead ("Add Reviewers" action).
- You can now add projects as reviewers from the revision detail typeahead.
- You can now add projects as reviewers from the CLI (`#yoloswag`).
- Generated commit messages now list project reviewers (`Reviewers: #yoloswag`).
I'll separate projects from users in the "Reviewers" tables in the next revision.
Test Plan:
- Added projects as reviewers using the web UI and CLI.
- Used `arc amend --show --revision Dnnn` to generate commit messages.
- Viewed revision with project reviewers in web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7230
Summary: Ref T1279. Updates status to 'accepted' or 'commented' when the user takes those actions.
Test Plan:
- Commented on a revision, got a comment icon.
- Accepted a revision, got an accept icon.
- Commented again, icon stayed as "accept".
- Faked the "old diff" states.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7229
Summary:
Ref T1279. No logical changes, just updates the reviewer display style.
We currently keep track of only "requested changes".
Test Plan: See screenshot.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7228
Summary:
Ref T1279. @champo did a lot of this work already; we've been doing double writes for a long time.
Add "double reads" (reading the edge table as both the "relationship" table and as the "reviewer status" table), and migrate all the data.
I'm not bothering to try to recover old reviewer status (e.g., we could infer from transactions who accepted old revisions) because it wold be very complicated and doesn't seem too valuable.
Test Plan:
- Without doing the migration, used Differential. Verified that reads and writes worked. Most of the data was there anyway since we've been double-writing.
- Performed the migration. Verified that everything was still unchanged.
- Dropped the edge table, verified all reviweer data vanished.
- Migrated again, verified the reviewer stuff was restored.
- Did various cc/reviewer/subscriber queries, got consistent results.
Reviewers: btrahan
Reviewed By: btrahan
CC: champo, aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7227
Summary: Right now emails don't include bookmark info (wasn't added in D2897). Lets include it so it's consistent with the web UI.
Test Plan: Inspected code, made sure it matched web UI code. Verified that web UI with these changes was consistent with rendering before refactoring.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7215
Summary:
Does what it says on the label. We already had 'Any changed file content', now we have 'Any added file content' and 'Any removed file content'.
- There is a bit of copied/pasted code here: I'm open to suggestions on how to refactor it so it's less redundant.
- The wording seems a little awkward, and as @epriestley mentioned in T3829, moved code will be detected less than ideally.
Test Plan: Created Herald Rules, verified via dry run that they were triggered in appropriate situations.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3829
Differential Revision: https://secure.phabricator.com/D7214
Test Plan: Confirm the API returns a single flat result with a unified git diff.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran, charles
Differential Revision: https://secure.phabricator.com/D7199
Test Plan:
Enable inline patches:
```
bin/config set metamta.differential.patch-format 'unified'
bin/config set metamta.differential.inline-patches 100000000
```
Create a new diff and confirm it renders correctly via email.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7198
Summary: I removed the only callsite in D7179, but forgot to remove this code.
Test Plan: Grepped for callsites.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7194
Summary:
- "revision" is misspelled.
- Remove an unused variable.
Test Plan: Used API console to call method.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7184
Summary: See D7162. This was like 99% my fault. Just provide a header; the new ones look pretty reasonable.
Test Plan: Viewed Diffusion change view, no exception.
Reviewers: vrana, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7183
Summary: Ref T603. Clean these up and move them to a single place.
Test Plan:
- Downloaded a raw diff.
- Enabled "attach diffs", created a revision, got an email with a diff.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7179
Summary: Ref T603. Swaps out most `PhabricatorFile` loads for `PhabricatorFileQuery`.
Test Plan:
- Viewed Differential changesets.
- Used `file.info`.
- Used `file.download`.
- Viewed a file.
- Deleted a file.
- Used `/Fnnnn` to access a file.
- Uploaded an image, verified a thumbnail generated.
- Created and edited a macro.
- Added a meme.
- Did old-school attach-a-file-to-a-task.
- Viewed a paste.
- Viewed a mock.
- Embedded a mock.
- Profiled a page.
- Parsed a commit with image files linked to a revision with image files.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7178
Summary:
Three changes here.
- Add `setActionList()`, and use that to set the action list.
- Add `setPropertyList()`, and use that to set the property list.
These will let us add some apropriate CSS so we can fix the border issue, and get rid of a bunch of goofy `.x + .y` selectors.
- Replace `addContent()` with `appendChild()`.
This is just a consistency thing; `AphrontView` already provides `appendChild()`, and `addContent()` did the same thing.
Test Plan:
- Viewed "All Config".
- Viewed a countdown.
- Viewed a revision (add comment, change list, table of contents, comment, local commits, open revisions affecting these files, update history).
- Viewed Diffusion (browse, change, history, repository, lint).
- Viewed Drydock (resource, lease).
- Viewed Files.
- Viewed Herald.
- Viewed Legalpad.
- Viewed macro (edit, edit audio, view).
- Viewed Maniphest.
- Viewed Applications.
- Viewed Paste.
- Viewed People.
- Viewed Phulux.
- Viewed Pholio.
- Viewed Phame (blog, post).
- Viewed Phortune (account, product).
- Viewed Ponder (questions, answers, comments).
- Viewed Releeph.
- Viewed Projects.
- Viewed Slowvote.
NOTE: Images in Files aren't on a black background anymore -- I assume that's on purpose?
NOTE: Some jankiness in Phortune, I'll clean that up when I get back to it. Not related to this diff.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7174
Summary: Missed this case in my sandbox
Test Plan: Reload a test diff
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7168
Summary: This adds the 'PHUIObjectBox' to nearly every place that should get it. I need to comb through Diffusion a little more. I've left Differential mostly alone, but may decide to do it anyways this weekend. I'm sure I missed something else, but these are easy enough to update.
Test Plan: tested each new layout.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7162
Summary:
Ref T603. This could probably use a little more polish, but improve the quality of policy error messages.
- Provide as much detail as possible.
- Fix all the strings for i18n.
- Explain special rules to the user.
- Allow indirect policy filters to raise policy exceptions instead of 404s.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7151
Summary:
Ref T603. Adds clarifying text which expands on policies and explains exceptions and rules. The goal is to provide an easy way for users to learn about special policy rules, like "task owners can always see a task".
This presentation might be a little aggressive. That's probably OK as we introduce policies, but something a little more tempered might be better down the road.
Test Plan: See screenshot.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7150
Summary:
Ref T603. Make Differential behaviors for logged-out and underprivleged users more similar to other apps.
I'm going to drop this "anonymous access" thing at some point, but `reviews.fb.net` actually looks like it's running semi-modern code, so leave it alive until we have a more compelling replacement in the upstream.
Test Plan: As a logged out user, browsed Differential and clicked things and such.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7148
Summary:
Ref T603. When a diff is attached to a revision, try to guess the repository if possible. In cases where we succeed, this automatically gives us intuitive policy behavior (i.e., you can see a revision if you can see the repository the change is against).
I pulled this into a funky little "Lookup" class for two reasons:
- It's used in two places;
- I anticipate that we might need to add some sort of `explainWhy()` method if users find the heuristics confusing.
Test Plan: Created and updated revisions, saw them pick up the correct repository association. Ran Herald dry run against associable and nonassociable revisions, saw correct values populate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7147
Summary: This isn't too useful most of the time since we don't automatically populate this data yet, but works fine.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7144
Summary: Ref T603. I think T2222 is fraught with peril so I'm not going to try to sequence it ahead of T603 for Differential. Provide access to policy controls in Differential's edit view.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7142
Summary: Adds some padding to the right
Test Plan: Looked at a diff
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7143
Summary: Ref T603. Makes the majority of reads policy aware (and pretty much all the important ones).
Test Plan:
- Created a comment with `differential.createcomment`.
- Created a new revision with `arc diff` in order to exercise `differential.creatediff`.
- Created an inline comment with `differential.createinline`.
- Added a comment to a revision.
- Edited an inline comment.
- Edited a revision.
- Wrote "Depends on ..." in a summary, saved, verified link was created.
- Browsed a file in Diffusion.
- Got past the code I changed in the Releeph request thing.
- Edited a Releeph request.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7136
Summary: Ref T603. Moves policy information from a custom field to the header for revisions.
Test Plan: Looked at a revision.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7135
Summary:
Ref T603. Read policies out of policy columns.
When a revision is associated with a repository (which is currently never), require view access on the repository to see the revision (or, require the viewer to be the owner). This is a blanket "do the right thing" rule which should make Differential's default policies align with user expectations.
Future diffs will populate the `repositoryPHID` when a revision is created.
Test Plan: Tooled around Differential. None of this stuff does anything yet, so nothing very exciting happened.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7134
Summary: Ref T603. Paves the way for policy controls.
Test Plan: Ran storage upgrade, bumbled around in Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7133
Summary: Ref T603. This swaps almost all queries against the repository table over to be policy aware.
Test Plan:
- Made an audit comment on a commit.
- Ran `save_lint.php`.
- Looked up a commit with `diffusion.getcommits`.
- Looked up lint messages with `diffusion.getlintmessages`.
- Clicked an external/submodule in Diffusion.
- Viewed main lint and repository lint in Diffusion.
- Completed and validated Owners paths in Owners.
- Executed dry runs via Herald.
- Queried for package owners with `owners.query`.
- Viewed Owners package.
- Edited Owners package.
- Viewed Owners package list.
- Executed `repository.query`.
- Viewed "Repository" tool repository list.
- Edited Arcanist project.
- Hit "Delete" on repository (this just tells you to use the CLI).
- Created a repository.
- Edited a repository.
- Ran `bin/repository list`.
- Ran `bin/search index rGTESTff45d13dffcfb3ea85b03aac8cc36251cacdf01c`
- Pushed and parsed a commit.
- Skipped all the Drydock stuff, as it it's hard to test and isn't normally reachable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7132
Summary:
Ref T603. Make almost every task read policy-aware. Notable exceptions are:
- Edge editor -- this stuff is prescreened and should be moved to ApplicationTransactions eventually anyway.
- Search/attach stuff -- this stuff needs some general work. The actual list should be fine since you can't pull handles. There may be a very indirect hole here where you could attach an object you can't see (but do know the ID of) to an object you can see. Pretty fluff.
- The "Tasks" field in Differential will let you reference objects you can't see. Possibly this is desirable, in the case of commandeering revisions. Mostly, it was inconvenient to get a viewer (I think).
Test Plan:
- Called `maniphest.info`.
- Called `maniphest.update`.
- Batch edited tasks.
- Dragged and dropped tasks to change subpriority.
- Subscribed and unsubscribed from a task.
- Edited a task.
- Created a task.
- Created a task with a parent.
- Created a task with a template.
- Previewed a task update.
- Commented on a task.
- Added a dependency.
- Searched for "T33" in object search dialog.
- Created a branch "T33", ran `arc diff`, verified link.
- Pushed a commit with "Fixes T33", verified close.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7119
Summary: I'd like to reuse this for other content areas, renaming for now. This might be weird to keep setForm, but I can fix that later if we need.
Test Plan: reload a few forms in maniphest, projects, differential
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7120
Summary:
`getArcanistProjectName()` has some logic which gets messy with the `self::ATTACHABLE` mechanism. This makes `differential.getdiff` and similar Conduit methods throw an exception when querying a diff which doesn't have a project. See <http://pastebin.com/Czzrd0Jz>.
Instead, unconditionally attach a project (possibly `null`) when loading diffs if they need projects.
Test Plan: Ran `differential.getdiff` against a `arc diff --raw` diff with no project, got a result instead of an exception.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, sttwister
Differential Revision: https://secure.phabricator.com/D7101
Summary: Adds status icons and colors to Maniphest and Differential. Also minor tweaks to them in hovercards. Probably some other stuff too.
Test Plan: Test many diff and task states.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7098
Summary:
- Kicks it out to full width.
- More useful header/crumbs/properties/actions (needs some more work).
- Works for public repositories.
- Fix a bug where the "rX" crumb would lose the branch you're on.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7063
Summary:
Ref T603. See inlines for an explanation. The case where I hit this was loading the "Pending Differential Revisions" panel in Diffusion when logged out, after making a repository public.
What happens is that we load 10 revisions (say, D1 .. D10) but the user can't see any of them. We then try to load the next 10, but since the pagination is ordered by date modified, we need to base the next query on the modified date of the last thing we loaded (D10). However, since we use the viewer's policies to load that cursor object, it fails to load, and then we just issue the same query over and over again, loading D1 .. D10 until we run out of execution time.
Test Plan: Interface now loads correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7059
Summary:
If handed a revision ID, we might get more than one result, which causes `executeOne()` to throw. Instead, translate the revision id into a diff ID before querying for the diff.
Also one small consistency change to parameter casing.
Test Plan: Used console to query for a revision with more than one diff using the revision id.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, mbishopim3
Differential Revision: https://secure.phabricator.com/D7026
Summary: We were returning an array here when previous return was a string.
Test Plan: reload diff
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7025
Summary:
Conduit has a query to make a draft inline comment, but createcomment doesn't have the ability to attach them.
Added optional parameter to attach any existing draft comments. Default value is false, so existing api users won't be effected by the change.
Test Plan: Tested no draft comments and multiple draft comments, attach_inlines =true, false, and empty.
Reviewers: vrana
Reviewed By: vrana
CC: epriestley, aran
Differential Revision: https://secure.phabricator.com/D7019
Summary:
- D6966 accidentally reversed the order of `$diffs`. Reverse it back.
- The new policy header stuff returns `array(icon, text)` but gets `strlen()`'d by a caller. Silence that warning for now.
Test Plan: Created a revision with several diffs. Saw them in the right order; saw no warning on the diff attach screen.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran, mbishopim3
Differential Revision: https://secure.phabricator.com/D7023
Summary: I kind of made a mess of the API doing T2784. I figure just adding this is fine but LMK if you'd prefer something like diffquery got cleaned up more to handle this. Also adds an idx() call as I was getting errors looking at old diffs. Fixes T3823.
Test Plan: used the new api via test console - great success.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3823
Differential Revision: https://secure.phabricator.com/D6966
Summary: The adds the ability to set 'properties' such as state, privacy, due date to the header of objects.
Test Plan: Implemented in Paste, Pholio. Tested various states.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7016
Summary:
Currently, these events don't fire for Conduit updates, which makes them sort of silly.
This will get proper treatment after T2222.
Test Plan: Installed a `throw new Exception(...)` event listener. Performed Conduit and web updates of revisions, saw event listener fire.
Reviewers: btrahan, guywarner
Reviewed By: guywarner
CC: aran
Differential Revision: https://secure.phabricator.com/D7004
Summary:
We currently have two giant messes for paging across multiple columns (usually because one column is not unique), and I'm about to add a third for Maniphest.
Provide a more structured way to build these `A > a OR (A = a AND B > b)` clauses.
Test Plan: Set page size to `2` for Differential and Diffusion and paged forward and backward with a bunch of different orders set. Pages worked as expected.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D6971
Summary:
Fixes T3807. Several issues:
- Currently, we split config of type `list<string>` on commas, which makes it impossible to enter a regex with a comma in it.
- Split on newlines only.
- Some of the examples are confusing (provided in JSON instead of the format you actually have to enter them).
- Show examples in the same format you should enter text.
- We didn't validate regexps.
- Introduce `list<regex>` to validate regexes.
@hlau: Note that the old config format for the bugtraq stuff implied the delimiters on the regular expression. They are no longer implied. The examples show the correct format.
Test Plan: Viewed and edited affected config, hitting error and success cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: hlau, aran
Maniphest Tasks: T3807
Differential Revision: https://secure.phabricator.com/D6969
Summary: Adds the small caret to differential. Cleans up dropdown frame.
Test Plan: Test caret in differential.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6983
Summary: Followup to D6924. Fixes T3824.
Test Plan: deleted a file in a diff. was able to view file content without JS errors
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3824
Differential Revision: https://secure.phabricator.com/D6963
Summary: Noticed this in the schema. "Touches" were an idea that never really got off the ground, as we built out more/better notification channels instead. Essentially, they recorded any object you'd ever interacted with. Maybe this will be useful some day, but for now it does nothing and can't be interacted with. Nuke it.
Test Plan: `grep`, loaded Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6953
Summary: Ref T603. Killing this class is cool because the classes that replace it are policy-aware. Tried to keep my wits about me as I did this and fixed a few random things along the way. (Ones I remember right now are pulling a query outside of a foreach loop in Releeph and fixing the text in UIExample to note that the ace of hearts if "a powerful" card and not the "most powerful" card (Q of spades gets that honor IMO))
Test Plan: tested the first few changes (execute, executeOne X handle, object) then got real mechanical / careful with the other changes.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran, FacebookPOC
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6941
Summary: Ref T603. Ref D6941.
Test Plan: Clicked around all over - looked good. I plan to re-test D6941 to make sure the executeOne case works now as intended
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6944
Summary: Ref T603. These were deprecated some time ago in favor of the more standard withIDs() / withPHIDs().
Test Plan: `grep`, loaded some interfaces.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6929
Summary: Ref T603. Prepare for conversion to a policy-aware query.
Test Plan: Browsed various interfaces which use this stuff.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6928
Summary:
Ref T3687. JIRA is able to piggyback on a fair amount of Asana infrastructure, but the voicing we use on Asana tasks (which are always about one object) isn't very good for JIRA issues (which may have many linked objects). Specifically, we publish stories like this to Asana:
alincoln accepted this revision.
This is meaningless in JIRA since you have no idea what it's talking about. Instead, publish like this:
alincoln accepted D999: Put a bird on it
Additionally, supplement it with a URI, so the total story text we publish is:
alincoln accepted D999: Put a bird on it
https://phabricator.whitehouse.gov/D999
Signifcantly less useless!
Test Plan: {F57523} {F57524}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D6907
Summary: Adds plain support for object lists that just look like lists
Test Plan: review UIexamples and a number of other applications
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6922
Summary: Ref T3687. The `value` property may be `null`.
Test Plan: Loaded a revision with the JIRA field enabled but no issues attached, no longer saw a warning about a bad argument to `foreach()`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D6890
Summary:
Previously, maniphest tasks would get upated by diffs on branches
with tasky names, even if maniphest was disabled.
Test Plan:
Tested createing a diff in sandbox with maniphest disabled, on a
git branch named using the format "t###". Without this change,
if there happened to be a task in the maniphest DB which matched,
it was updated an email was sent to users.
Reviewers: epriestley
Reviewed By: epriestley
CC: wez, slawekbiel, whhone, Korvin, aran
Differential Revision: https://secure.phabricator.com/D6881
Summary:
Ref T3687. This adds a field which allows you to link Differential Revisions to JIRA issues.
This is just about as basic as it can get, but gets the job done. The field enables itself if you have a JIRA auth provide. You enter JIRA issues in a comma-delimited format and it generates appropriate edges.
Nothing is pushed to the issues yet.
The only real rough part here is that if you commandeer a revision which is linked to issues you can't see, editing it is difficult via the CLI. This seems pretty much like a non-issue, but at some point we can let the field throw some kind of "RecoverableInvalidFieldException" which just warns the user. The "no reviewers, continue anyway?" prompt could then use that too.
Test Plan:
- Edited via web UI, tried valid/invalid edits, checked that edges showed up in the database, added/removed issues, clicked issue links.
- Edited via CLI, tried valid/invalid edits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D6879
Summary:
Ref T3599
Go through everything, grep a bit, replace some bits.
Test Plan: Navigate around a bit
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3599
Differential Revision: https://secure.phabricator.com/D6871
Summary: Fixes T3786. Not 100% sold on this (I don't want to restore all of the original filters, since users can and should just build the weird ones if they use them), but this is almost certainly the most useful of the defaults which ApplicationSearch removed.
Test Plan: Viewed `/differential/`, executed the query.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3786
Differential Revision: https://secure.phabricator.com/D6860
Summary:
I don't know if there is something more sinister going on
under the covers, but we have a couple of diffs that trigger:
Unhandled Exception ("BadMethodCallException")
Call to a member function getMetadata() on a non-object
when the diff page is handling its async render calls. One diff
in particular has multiple image adds and thus has a stack of of these
error dialogs to close.
This isn't a new regression, we just haven't gotten around to debugging
it until now (reported on 6/12)
One revision that triggers it has two diffs. If I show Base -> Diff 1
I don't hit the error. When I select Base -> Diff 2, or Diff 1 -> Diff
2, the error triggers.
I don't understand what this means, but this diff avoids the null object
reference that causes the exception.
Test Plan:
Load the offending diff, don't hit the error. The diff loads
the images that were added
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6851
Summary:
Fixes T3781. The UI defaults to "Created" but the query defaults to "Modified". Make the two consistent.
In particular, an issue this fixes is that previously a `/differential/?authors=duck` page would show "Order: Created" but actually order by "Modified".
Test Plan: Visited `/differential/?authors=duck` and verified the revisions were ordered by creation date.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3781
Differential Revision: https://secure.phabricator.com/D6843
Summary:
Ref T3775 (discussion here). Ref T2625.
T3775 presents two problems:
# Existing tools which linked to `/differential/active/epriestley/` (that is, put a username in the URL) can't generate search links now.
# Humans can't edit the URL anymore, either.
I think (1) is an actual issue, and this fixes it. I think (2) is pretty fluff, and this doesn't really try to fix it, although it probably improves it.
The fix for (1) is:
- Provide a helper to read a parameter containing either a list of user PHIDs or a list of usernames, so `/?users[]=PHID-USER-xyz` (from a tokenizer) and `/?users=alincoln,htaft` (from an external program) are equivalent inputs.
- Rename all the form parameters to be more digestable (`authorPHIDs` -> `authors`). Almost all of them were in this form already anyway. This just gives us `?users=alincoln` instead of `userPHIDs=alincoln`.
- Inside ApplicationSearch, if a request has no query associated with it but does have query parameters, build a query from the request instead of issuing the user's default query. Basically, this means that `/differential/` runs the default query, while `/differential/?users=x` runs a custom query.
Test Plan: {F56612}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625, T3775
Differential Revision: https://secure.phabricator.com/D6840
Summary:
Ref T3772. The original version of D5451 had a very colorful version of this which felt a bit arbitrary, and we moved away from it after discussion, particularly [[ https://secure.phabricator.com/D5451#comment-8 | here (chad) ]] and [[ https://secure.phabricator.com/D5451#comment-14 | here (me) ]] and [[ https://secure.phabricator.com/D5451#comment-19 | here (chad again) ]].
The core of my objection was that status and priority to the viewer aren't the same: a "needs revision" revision that you authored is high priority (you need to revise it), but a "needs revision" revision that someone else authored is low priority (you're waiting on them to revise it). If we color by status, revisions in both high priority and low priority states will be colored red. We can instead color by viewer priority (blocking others = red, needs attention = orange, waiting on others = blue; or something), but that would be redundant (we already group by it, so you'd get big chunks of stuff with the same color and color would have no utility), confusing (in ungrouped views, the colors would not be self-explanatory) and weirdly inconsistent (different users would see objects having different colors).
I still think all this holds, but I also thought that "viewer priority" was enormously more important than "state", since I use the former frequently and the latter very rarely. From T3772, it sounds like some users use "state" a lot more than I do (i.e., they want to find "accepted" revisions within a "viewer priority" group like "Action Required"). This is a possible approach to that.
I think another issue was the heavy use of the color in the original; this restores a more conservative version of it which doesn't have as much weight. In particular:
- Revisions in the "Needs Review" state retain the default color, rather than orange.
- Revisions in the "Closed" state have the disabled effect.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3772
Differential Revision: https://secure.phabricator.com/D6839
Summary: Fixes T3486. I don't love how this looks -- maybe we could try different icons? Like white icons on a brighter red/yellow background?
Test Plan: {F56299}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3486
Differential Revision: https://secure.phabricator.com/D6833
Summary: Fixes T3773. By default, the `/users/` datasource excludes disabled users (since it doesn't make sense to assign them tasks or make them reviewers, for example). However, for ApplicationSearch it does make sense to look for objects, e.g., authored by a disabled user.
Test Plan: Searched for disabled users in Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3773
Differential Revision: https://secure.phabricator.com/D6834
Summary:
D6335 has some unexpected side effects. This adds back the
where clause for the owned query. There may be other problems.
Test Plan:
Ran:
```
echo '{"query":"owned","guids":["myphid"]}' | arc --conduit-uri=https://myhost call-conduit differential.find
```
Reviewers: epriestley, dschleimer
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6832
Summary: Some more callsites, let me know if you see others, I think think is 98% of them now.
Test Plan: tested each page
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6814
Summary:
This attempts some consistency in form layouts. Notably, they all now contain headers and are 16px off the sides and tops of pages. Also updated dialogs to the same look and feel. I think I got 98% of forms with this pass, but it's likely I missed some buried somewhere.
TODO: will take another pass as consolidating these colors and new gradients in another diff.
Test Plan: Played in my sandbox all week. Please play with it too and let me know how they feel.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6806
Summary:
We can get this out of PHIDType reasonably in all cases and simplify implementation here.
None of these translate correctly anyway so they're basically debugging/development strings.
Test Plan: `grep`, browsed some transactions
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6786
Summary:
^\s+(['"])dust\1\s*=>\s*true,?\s*$\n
Test Plan: Looked through the diff.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6769
Summary: Fixes T2258.
Test Plan: collapsed and expanded file via the dropdown - good stuff. got the "undo" element into the mix - also good stuff.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, Korvin, aran
Maniphest Tasks: T2258
Differential Revision: https://secure.phabricator.com/D6742
Summary: Ref T2852. Bleh, gross. Does what it says in the title.
Test Plan: {F54024}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6735
Summary:
Ref T2769. Get content types out of hard-coded config and into dynamic adapters.
This removes the "MERGE" and "OWNERS" content types, which were vestigal. These needs are likely better addressed through subscriptions/transactions, and are obsolete, and haven't existed for 2+ years and no one has asked for them to be restored.
Test Plan: Mostly a bunch of grep. Viewed rule list, rule edit. Edited a revision.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2769
Differential Revision: https://secure.phabricator.com/D6656
Summary: Ref T2852. After some discussion, Asana doesn't want "close" stories either.
Test Plan: Used `bin/feed republish` to publish close and non-close stories from Differential and Diffusion. Verified comments were synchronized in the expected cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6697
Summary:
Ref T3671. A lot of applications have pretty ad-hoc preview code. Clean it up a bit and add Summary preview to Differential.
After ApplicationTransactions we might want to try to serialize the whole form and show a preview of all the transactions, but this seems not very useful in most cases (I'd guess that Remarkup previews are 99% of the value) and tricky to get right (e.g., adding images which don't exist yet to Pholio mocks).
I think I can add this in a few other places, too.
Test Plan:
Edited Maniphest Tasks and Differential Revisions, mashed some buttons. Verified previews rendered correctly. Grepped for removed CSS classes (no hits).
{F52907}
Reviewers: btrahan, Firehed
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T3671
Differential Revision: https://secure.phabricator.com/D6673
Summary: Ref T2852. Current code works fine, but although we want to drop creation stories, we really only want to drop the story text, not the other effects of the creation story. Also generalize this mechanism so we don't have Asana-specific code in the publishers.
Test Plan: Used `bin/feed republish` to publish creation and non-creation stories. Verified creation story published no text.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6639
Summary: Ref T2852. Currently there's effectively a double notification: one for creating the task, and one for the "alincoln created this revision" story. Drop the "create" story.
Test Plan: Used `bin/feed republish` to republish "create" and non-"create" stories. Verified "create" was dropped as unsupported, while non-"create" went through.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6589
Summary: Ref T2715. Had to start loading status information in the query class. Debated trying to clean up some of the attach / load stuff but decided to just add status under the new paradigm for now.
Test Plan: phid.query also made a status and checked that out. also played in conpherence.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2715
Differential Revision: https://secure.phabricator.com/D6585
Summary: Ref T2852. If the prefix is removed by configuration, we'll incorrectly leave a leading space. Trim any leading whitespace off.
Test Plan: Ran `bin/feed republish` to sync an object to Asana
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6575
Summary: Ref T2852. Pulls the Differential-specific aspects of the Asana sync out of the worker. Next diff will add a publisher for Audit/Diffusion.
Test Plan: Published events, including state changes. Saw them reflected correctly in Asana.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6569
Summary: I copied this over wrong. Ref T2715
Test Plan: Looked at Maniphest with linked commits/revisions, e.g.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2715
Differential Revision: https://secure.phabricator.com/D6531
Summary:
Fixes T3030. T1977 attempted to fix this but either didn't work (I think this is the case) or was broken later. We don't send `DifferentialCommentMail` on a create or update; we send `DifferentialReviewRequestMail`.
Also update the details to be more clear.
Test Plan:
Verified review request mail is marked undeliverable:
```
$ ./bin/mail show-outbound --id 6644
...
PARAMETERS
...
mailtags: ["differential-review-request"]
...
subject: D922: asdf
subject-prefix: [Differential]
vary-subject-prefix: [Request, 100 lines]
...
RECIPIENTS
! duck (duck)
- This mail has tags which control which users receive it, and this recipient has not elected to receive mail with any of the tags on this message (Settings > Email Preferences).
BODY
epriestley requested code review of "asdf".
...
```
Verified update mail is marked undeliverable:
```
$ ./bin/mail show-outbound --id 6646
...
Message: Message has no valid recipients: all To/Cc are disabled, invalid, or configured not to receive this mail.
PARAMETERS
...
mailtags: ["differential-updated"]
...
subject: D922: asdf
subject-prefix: [Differential]
vary-subject-prefix: [Updated, 100 lines]
...
RECIPIENTS
! duck (duck)
- This mail has tags which control which users receive it, and this recipient has not elected to receive mail with any of the tags on this message (Settings > Email Preferences).
BODY
epriestley updated the revision "asdf".
...
```
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3030
Differential Revision: https://secure.phabricator.com/D6518
Summary: Fixes T3564. This was a change out of FB recently, see D6340. Add a missing label.
Test Plan: "Request Review" now has a label.
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3564
Differential Revision: https://secure.phabricator.com/D6484
Summary:
Ref T2852. We need to distinguish between an API call which worked but got back nothing (404) and an API call which failed.
In particular, Asana hit a sync issue which was likely the result of treating a 500 (or some other error) as a 404.
Also clean up a couple small things.
Test Plan: Ran syncs against deleted tasks and saw successful syncs of non-tasks, and simulated random failures and saw them get handled correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6470
Summary:
Change all instances of `id(new DifferentialRevision())->load($id)` for `DifferentialRevisionQuery` where reviewers are loaded.
Also make sure that the new reviewer status is being loaded so that all calls to `getReviewers` can be removed in the near future.
Test Plan: Use all three controllers with several revisions and check they still work in sane way
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D6466
Summary:
Ref T1279.
Switched all differential conduit methods to use `DifferentialRevisionQuery` where `loadRelations` was being used.
Test Plan: Called all the methods changed and verified they still worked as advertised.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T603, T1279
Differential Revision: https://secure.phabricator.com/D6452
Summary: Add `getReviewerStatus` to get an array of `DifferentialReviewer` objects. The method `needReviewerStatus` in `DifferentialRevisionQuery` loads the edges into the revisions loaded.
Test Plan: Added `->needReviewerStatus(true)` to `DifferentialRevisionSearchEngine` and checked through logging that the data was being loaded correctly.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6450
Summary: rPad17c99c1b0222292a47ca79561a356cb8b5a5d5 stopped the fatal and this provides the forward fix. I think this is what a forward fix is anyway.
Test Plan: viewed a revision (D63 is my boy) and no fatals
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6448
Summary:
Fixes T2691. Now, all PhabricatorActionListViews in the codebase setObjectHref to $request->getRequestURI. This value is passed over to PhabricatorActionItems right before they are rendered. If a PhabricatorActionItem is a workflow and there is no user OR the user is logged out, we used this objectURI to construct a log in URI.
Potentially added some undesirable behavior to aggressively setUser (and later setObjectURI) from within the List on Actions... This should be okay-ish unless there was a vision of actions having different user objects associated with them. I think this is a safe assumption.
Test Plan: played around with a mock all logged out (Ref T2652) and it worked!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2691
Differential Revision: https://secure.phabricator.com/D6416
Summary: One place used status, other used state. Killed state in favor of status.
Test Plan: None at all
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6422
Summary:
Keep track of the state of a reviewer in an edge between reviewer and revision.
The edge stores the state of the review, added or rejected. And if the revision was
accepted by that reviewer the id of the diff accepted.
Test Plan:
Create diffs and clowncopterize reviewer list changes. This includes:
* Adding new reviewers
* Resigning
* Commandering a revision
Reviewers: epriestley
CC: aran, Korvin
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D6372
Conflicts:
src/applications/differential/editor/DifferentialCommentEditor.php
Summary:
1. Show add reviewer typehead when user selects resign as a reviewer.
2. Change the label for add reviewers typehead when user selects resign as a reviewer.
Test Plan:
1. Add yourself as a reviewer in a diff.
2. Select "Resign as Reviewer" in comment editor.
Add reviewer typehead should display, with label "Suggest Another Reviewer".
Add reviewer typehead is also displayed after user refreshed the page with "Resign as Reviewer"
selected.
Reviewers: wez, epriestley
Reviewed By: epriestley
CC: aran, epriestley, akramer, person
Differential Revision: https://secure.phabricator.com/D6340
Summary:
This leaves the space between the properties and the blurb looking a bit empty, but there will be more stuff there soon (status, VCS names, email, phone/fax numbers, etc., and custom user fields).
I removed "view lint messages" since I'm pretty sure no one has ever clicked it. I think providing better search (e.g, T2625) to that UI in Diffusion is a preferable approach.
Test Plan: {F49423}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6403
Summary: Ref T2852. When a Differential revision is linked to an Asana task, show the related task in Differential.
Test Plan: {F49234}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6387
Summary: Ref T603. Show object visibility in the UI. This isn't editable or mutable yet, but will be after T2222.
Test Plan: {F48689} {F48690}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6361
Summary: Minor tweaks for consistency, and raise a friendlier error if the user doesn't upload anything.
Test Plan:
{F48686}
{F48685}
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6360
Summary: Fixes spacing in Differential revision detail and Diffusion browse views.
Test Plan:
{F48677}
{F48678}
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6359
Summary: Ref T3485. Moves flag icon inline in the header.
Test Plan: {F48654}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3485
Differential Revision: https://secure.phabricator.com/D6355
Summary:
Ref T603. Ref T2625. Fixes T3241. Depends on D5451. Depends on D6346.
@wez, this changes the Differential revision list UI substantially and may generate a lot of bikeshedding / who-moved-my-cheese churn. See T3417 for context, for example. The motivations for this change are:
- The list now works on devices, like phones and tablets. This is a requirement to make the rest of Differential work on devices.
- Although ApplicationSearch intentionally presents a simpler interface initially and some options which were one click away before aren't now, it is much more powerful than the search it replaces and allows users to build, save, share, fork, edit, and customize a much wider range of queries. Users who used the old filters frequently can use Advanced Search -> Save Custom Query to create new versions of them, and of any other query. "Edit Queries.." allows users to remove and reorder queries, including builtin queries. Basically, there are like three things which have gone from "1-click" to "a few clicks", and ten trillion things which have gone from "hard/impossible" to "relatively easy".
The local screenshots look a bit iffy, but I think a lot of this is the fakenesss of my test data. If they still feel iffy in production we can tweak them until they feel good, like we did for Maniphest.
Test Plan:
{F48477}
{F48478}
Reviewers: btrahan, chad, wez
Reviewed By: btrahan
CC: aran, s
Maniphest Tasks: T603, T2625, T3241
Differential Revision: https://secure.phabricator.com/D6347
Summary:
Tried out `PhabricatorObjectItemView` for Differential. It looks smexy and smooth.
Refs T2014
- Title and Date as Maniphest
- Author in the handle icon
- Bar color reflects revision status (Needs Review, Accepted, Abandoned etc.) @chad looking for non-blue is faster than keeping watch for everything that's not "Closed" in old table form
- Some status information are in footer icons; currently only stale/old status display as well as saved drafts, maybe more in future; these come into my mind:
- No reviewer warning
- Push Blocking Priority (T2730)
- Trivial, fast review guaranteed
- Sketch / Just looking for advice/help
- Arcanist Project (T2614)
- Denote "Public Send-in" (T1476)
{F37662}
{F37663}
{F37664}
{F37665}
Some flaws:
- Date and reviewers on every entry the same?
- No respect for Differential fields (for some reason, every entry appeared the same, so broke it to parts)
- Plenty of (potential) increase in height - advise reducing paging length from 100 to 50 - or just ignore me
Suggestions for the future:
- Expand the meta information regarding revisions; e.g. the various status displays above
- Uh... T2543, T1279, T793, T731 and what else I want for Differential, because they are awesome!
- T793 should be in particular easy appearance-wise, just copy-paste from Maniphest
Test Plan: By looking at it, of course. Verified there are no errors or crashed
Reviewers: epriestley, chad, btrahan, liguobig
Reviewed By: chad
CC: aran, Korvin, edward, nh
Maniphest Tasks: T2014
Differential Revision: https://secure.phabricator.com/D5451
Conflicts:
src/__celerity_resource_map__.php
Summary:
Ref T603. Ref T2625. Use cursors to page Differential queries, not offsets.
The trick here is that some queries are ordered. In these cases, we either need to pass some kind of tuple or do a cursor lookup. For example, if you are viewing revisions ordered by `dateModified`, we can either have the next page be something like:
?afterDateModified=2398329373&afterID=292&order=modified
...or some magical token:
?afterToken=2398329373:292&order=modified
I think we did this in Conpherence, but one factor there was that paging orders update with some frequency. In most cases, I think it's reasonable to pass just the ID and do a lookup to get the actual clause value (e.g., go look up object ID 292 and see what its dateModified is) and I think this is much simpler in general.
Test Plan: Set page size in Differential to 3, and paged through result lists ordered by date created and date modified.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603, T2625
Differential Revision: https://secure.phabricator.com/D6345
Summary:
Ref T603. Ref T2625. Makes `DifferentialRevisionQuery` do policy checks.
Note that it still uses inefficient offset-based paging, but it's rare to page through revisions. I'll switch to cursor paging in a future diff.
Test Plan: Viewed a bunch of Differential interfaces, home page, etc. This shouldn't actually materially impact anything.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603, T2625
Differential Revision: https://secure.phabricator.com/D6344
Summary:
Currently, when querying for responsible users (revisions where a given user is either the author or a reviewer), we do this:
- If the query passes a bunch of hard-coded special cases, use a special hard-coded UNION.
- Otherwise, use a very complicated JOIN/WHERE clause.
This is bad for several reasons:
- Tons and tons of hard-coding and special casing.
- The JOIN/WHERE clause performs very poorly for large datasets.
- (As a material consequence, the homepage issues a responsible query which barely misses the hard-coded special cases and goes down the slow path.)
Instead, //always// use the UNION strategy to execute a "responsible" query. Specifically, if we have responsible PHIDs, temporarily add them to the author list and build a normal query, then repeat for reviewers, then UNION any clauses we built.
Fixes T3377. Ref T603. Ref T2625. Depends on D6342.
There's various folklore about UNION ALL / UNION DISTINCT performance. UNION DISTINCT is simpler here and the number of rows is small, although we could use UNION ALL in the form:
SELECT * FROM ((SELECT ...) UNION ALL (SELECT ...) ORDER) GROUP LIMIT
...if we find that there's some performance benefit at some point.
Test Plan: Used DarkConsole to examine queries. Viewed home page and Differential dashboard/authors/subscribers.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603, T2625, T3377
Differential Revision: https://secure.phabricator.com/D6343
Summary:
Ref T603. This introduces a policy-aware DifferentialDiffQuery and converts most callsites.
I've left unusual callsites (mostly: hard to get the viewer, unusual query, queries related to active diffs) alone for now, so this isn't exhaustive but hits 60-80% of sites.
Test Plan: Created diff; created revision; viewed diffs and revisions; made additional conduit calls.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6338
Summary: Ref T603. This query isn't policy-aware yet, but prepare for it to be one day.
Test Plan: Looked at: home page; differential home; differential detail; diffusion browse. Made differential.query conduit call.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6337
Summary: Ref T603. This is a very old, very bad version of `DifferentialRevisionQuery`. I want to modernize only the latter. Express the remaining callsite of the former in terms of `DifferentialRevisionQuery`.
Test Plan: Executed all four modes of `differential.find`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6335
Summary:
Ref T603.
- Primarily, this gets rid of a `DifferentialRevisionListData` callsite.
- Also modernize and clean up some UI stuff.
Test Plan:
{F48260}
{F48261}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6334
Summary: See discussion in IRC. Not 100% sure what's going on here because of email ghost theives, but conceivably a commit with no changes will end up with `null` changesets instead of `array()` changesets, which throws. Such diffs are certianly possible (`git commit --allow-empty`) even if they aren't the issue in this specific case. See T3416. Initialize changesets to `array()` to avoid throwing.
Test Plan:
Viewed some commits?
iiam
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6339
Summary: Ref T2222. Currently, we load inline comments by `commentID` here, but we always pass every commentID associated with the revision. Instead, just load non-draft comments by revision ID. This simplifies querying a little bit and is likely faster anyway (draft comments are currently loaded separately).
Test Plan: Looked at some revisions and verified inlines showed up correctly and in the right places.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6270
Summary:
Ref T2222. My path forward here wasn't very good -- I was thinking I could set `transactionPHID` for the inline comments as I migrated, but it must be unique and an individual DifferentialComment may have more than one inline comment. Dropping the unique requirement just creates more issues for us, not fewer.
So the migration in D6266 isn't actually useful. Undo it -- this can't be a straight revert because some installs may already have upgraded.
Test Plan: Ran new migrations, verified the world ended up back in the same place as before (made comments, viewed reivsions).
Reviewers: btrahan
Reviewed By: btrahan
CC: wez, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6269
Summary: Ref T2222. I didn't translate this query properly; reproduce the original.
Test Plan: When viewing a revision with non-draft inline comments by a user other than the viewer, the inline comments now appear on the changesets themselves.
Reviewers: kawakami, btrahan, garoevans
Reviewed By: garoevans
CC: aran, mbishopim3
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6281
Summary: I assume this is a bug!
Test Plan: Look at it
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6279
Summary:
Ref T2222. This adds PHIDs to all Differential comments so I can migrate the inlinecommment table to transaction_comment in the next diff.
@wez, this will issue a few million queries for Facebook (roughly, one for each Differential comment ever made). It's safe to skip the `.php` half of the patch, bring Phabricator up normally, and then apply this patch with Phabricator running if that eases the migration, although the next few diffs will probably be downtime-required migrations so maybe it's easier to just schedule some downtime.
Test Plan: Ran migration locally. Verified existing comments and new comments received PHIDs.
Reviewers: btrahan
Reviewed By: btrahan
CC: wez, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6266
Summary:
Ref T2222. See D6260.
Push all this junk behind a Query so I can move the storage out from underneath it.
Test Plan: Viewed home page, list view, revision. Made draft, looked at preview, submitted draft, viewed inline, replied to inline.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6262
Summary:
Ref T2222. Ref T1460. Depends on D6260.
This creates the new tables, but doesn't start using them. I added three new fields for {T1460}, to represent fixed/done/replied states.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T1460, T2222
Differential Revision: https://secure.phabricator.com/D6261
Summary:
Ref T2222.
I'm thinking about how I want to approach the Asana sync, and I want to try to do T2222 first so that we can build it cleanly on top of ApplicationTransactions. I think we can at least walk down this road a little bit and if it turns out to be scary we can take another approach.
I was generally very happy with how the auth migration turned out (seemingly, it was almost completely clean), and want to pursue a similar strategy here. Basically:
- Wrap the new objects in the old objects for reads/writes.
- Migrate all the existing data to the new table.
- Everything hard is done; move things over a piece at a time at a leisurely pace in lots of smallish, relatively-easy-to-understand changes.
This deletes or abstracts all reads of the DifferentialComment table. In particular, these things are **deleted**:
- The script `undo_commits.php`, which I haven't pointed anyone at in a very long time.
- The `differential.getrevisionfeedback` Conduit method, which has been marked deprecated for a year or more.
- The `/stats/` interface in Differential, which should be rebuilt on Fact and has never been exposed in the UI. It does a ton of joins and such which are prohibitively difficult to migrate.
This leaves a small number of reading interfaces, which I replaced with a new `DifferentialCommentQuery`. Some future change will make this actually load transactions and wrap them with DifferentialComment interfaces.
Test Plan: Viewed a revision; made revision comments
Reviewers: btrahan
Reviewed By: btrahan
CC: edward, chad, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6260
Summary: Used more logical icons for subscribe, auto, and delete instead of the mail icons. Fixes T3329
Test Plan: Tested subscribing and unsubscribing in Maniphest.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3329
Differential Revision: https://secure.phabricator.com/D6151
Summary:
This diff covers a bit of ground.
- PHUIDocumentExample has been added
- PHUIDocument has been extended with new features
- PhabricatorMenuView is now PHUIListView
- PhabricatorMenuItemView is now PHUIItemListView
Overall - I think I've gotten all the edges covered here. There is some derpi-ness that we can talk about, comments in the code. Responsive design is missing from the new features on PHUIDocument, will follow up later.
Test Plan: Tested mobile and desktop menus, old phriction layout, new document views, new lists, and object lists.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6130
Summary:
This was mentioned in T2928 and nobody objected.
It just references the task instead of fixing it as that would be too aggressive.
It also doesn't check assignee of the task (by purpose).
Test Plan: Created diff from a branch named T2928.
Reviewers: epriestley, edward
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2928
Differential Revision: https://secure.phabricator.com/D5640
Summary:
Kind of a quick look at an idea for T2184
Ref T2184
Test Plan: Make sure the site still loads
Reviewers: epriestley
CC: aran, Korvin, mbishopim3
Maniphest Tasks: T2184
Differential Revision: https://secure.phabricator.com/D6045
Summary: Added constants to PhabricatorEventType. Modified DifferentialRevisionEditor and DifferentialCommentEditor.
Test Plan:
Created a revision. Edited and made a comment on that revision. It's updating as usual. I think nothing broke may be it's working.
Let me know if I have done it correclty.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T2899
Differential Revision: https://secure.phabricator.com/D5869
Summary:
removes the whole custom image thing, instead using a more standard application crumbs. Gives this glorious space back to the compose area which is now tens of pixels taller. Also defaults it to the people widget. Basically, fixes T3160.
For now, you **CAN NOT** edit the title of a conpherence. I didn't want to jam in too much here. Next diff will be to change the widget icons into the dropdown switcher, which will also bring back the editing of titles.
Test Plan: looked at conpherence and it was pretty. Resized it vigorously and it wasn't too bad.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T3160
Differential Revision: https://secure.phabricator.com/D5998
Summary:
Fixes T3218.
- Currently, Paste pages don't clear notifications about the paste (notably, token notifications).
- Currently, Paste pages don't show tooltips on tokens.
- `buildApplicationPage()` stopped respecting `pageObjects` (which controls whether "this page has been updated" is shown). Restore that.
- Make `pageObjects` imply "clear notifications on this stuff".
Test Plan: Viewed a tokened Paste. Verified it cleared the notification and hovering over a token showed a tip.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3218
Differential Revision: https://secure.phabricator.com/D5971
Summary:
Ref T2785
Looks for hosts in `conduit.servers` config and if any exist route any conduit calls through any one of the hosts.
Test Plan:
Make some curl calls to public methods (`conduit.ping`), watch the access log for two requests. Make some calls from the UI that require authentication, watch the access log a bit more.
Also ran the unit tests.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2785
Differential Revision: https://secure.phabricator.com/D5970
Summary:
Moves all remaining mail handling into ReplyHandlers.
Farewell, `getPhabricatorToInformation()`! You were a bad method and no one liked you.
Ref T1205.
Test Plan:
- Used test console to send mail to Revisions, Tasks, Conpherences and Commits (these all actually work).
- Used test console to send mail to Requests, Macros, Questions and Mocks (these accept the mail but don't do anything with it, but didn't do anything before either).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1205
Differential Revision: https://secure.phabricator.com/D5953
Summary: This doesn't do anything, but touches a bunch of files so I split it out to reduce the size of the next diff. Basically, make `MailReceiver` classes responsible for loading their application objects. Ref T1205.
Test Plan: Inspection / next diff / code is not reached.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1205
Differential Revision: https://secure.phabricator.com/D5941
Summary: Ref T2784. This one was a wee bit complicated. Had to add PhabricatorUser and concept of initFromConduit (or not) to DiffusionRequest.
Test Plan: foreach repo, visited CALLSIGN and clicked a commit and verified they laoded correctly. Hacked code to hit NOT via Conduit and repeated tests to great success.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5928
Summary:
Ref T1205. Continuation of D5915.
Currently, `PhabricatorMetaMTAReceivedMail` has //all// the logic for routing mail. In particular:
- New mail receivers in applications must edit it.
- Mail receivers don't drop out when applications are uninstalled.
Applications have some logic in subclasses of `PhabricatorMailReplyHandler`, but this class is a bit of a mess. It is also heavily based on the assumption that mail receivers are objects (like revisions), but this is not true in at least two cases today (creating new tasks with `bugs@`, creating a new Conpherence thread) and likely other cases in the future (e.g., revision-by-mail).
Move this logic into a new `PhabricatorMailReceiver` classtree. This is similar to `PhabricatorMailReplyHandler` but a bit cleaner and more general. I plan to heavily reduce the responsibilities of `PhabricatorMailReplyHandler` or possibly eliminate it entirely.
For now, the new classtree doesn't do much of interest. The only behavioral change this diff causes is that Phabricator will now reject mail to an application when that application is uninstalled.
I also moved all the `ReplyHandler` classes into `mail/` directories in their respective applications.
Test Plan: Unit tests, used receive test to route mail to various objects.
Reviewers: btrahan
Reviewed By: btrahan
CC: Afaque_Hussain, edward, aran
Maniphest Tasks: T1205
Differential Revision: https://secure.phabricator.com/D5922
Summary:
Fixes T3151. Javelin treats a behavior without parameters as a global behavior and invokes it only once no matter how many times it is initialized (this is necessarily correct for any reasonable behavior, as the inputs do not vary). A recent patch changed `differential-dropdown-menus` from a zero-argument global behavior to an implicitly nonzero-argument behavior by adding `pht`.
Currently, we initialize the behavior next to dropdown menu creation, so this resulted in `O(N^2)` initializations of the menus. For large diffs, this locks browsers. Instead, initialize outside of the dropdown loop so we ginitialize each menu just once.
Test Plan: Viewed a 2,000 file diff without browser lock.
Reviewers: wez, vrana, btrahan
Reviewed By: wez
CC: aran
Maniphest Tasks: T3151
Differential Revision: https://secure.phabricator.com/D5885
Summary: Fixes the button spacing issue (doesn't seem related to forms?) and moves fonts and sizes over to Helvetica.
Test Plan: Submit many inline comments.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5882
Summary:
This creates a common form look and feel across the site. I spent a bit of time working out a number of kinks in our various renderings. Some things:
- Font Styles are correctly applied for form elements now.
- Everything lines up!
- Selects are larger, easier to read, interact.
- Inputs have been squared.
- Consistant CSS applied glow (try it!)
- Improved Mobile Responsiveness
- CSS applied to all form elements, not just Aphront
- Many other minor tweaks.
I tried to hit as many high profile forms as possible in an effort to increase consistency. Stopped for now and will follow up after this lands. I know Evan is not a super fan of the glow, but after working with it for a week, it's way cleaner and responsive than the OS controls. Give it a try.
Test Plan: Tested many applications, forms, mobile and tablet.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5860
Summary:
Ref T1751. This still doesn't do anything very interesting, but loads the acutal Commit objects that a commit message claims to revert.
The only tricky thing here is that we need to interpret "reverts rnnn" or "reverts nnn" in an SVN repository as "reverts rXnnn", where "X" is the current repository. This adds a method to do allow `DiffusionCommitQuery` to do that.
Test Plan:
Used `reparse.php --message` to reparse several commits with revert language and verify they loaded the correct affected commits.
In an SVN repository, created a commit with ambiguous revert language ("reverts n", "reverts rn", "reverts n, n") and verified it identified the affected commits correctly despite ambiguity.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1751
Differential Revision: https://secure.phabricator.com/D5842
Summary:
Ref T1751. When commit messages include language like "reverts X", parse it. This change doesn't do anything with the commits yet.
I attempted to cover all "natural" VCS messages and all reasonable human variations of these messages.
Test Plan: Added unit tests. Added `var_dump()` and used `scripts/repository/reparse.php --message X` to reparse some commit messages, with expected results.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1751
Differential Revision: https://secure.phabricator.com/D5840
Summary:
getDiffDict method returns the JSON for the changesets in a diff
The JSON descriping a changeset didn't containt the changeset ID
in some scenarios, knowing the changeset ID is really useful for the
clients.(i.e. when you want to open a standalone view of the changeset,
you need to know its ID)
Test Plan: existing
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5816
Summary: These should be in (true, false) order, not (false, true) order. This was a transcritpion error in porting the config over.
Test Plan: Edited config from the web, verified the labels matched the underlying values.
Reviewers: tberman, btrahan
Reviewed By: tberman
CC: aran
Differential Revision: https://secure.phabricator.com/D5786
Summary:
We now have the app menu top-right, so we don't need the side navbar anymore
Refs T2014
Test Plan: Visited list view in narrow / wide browser. Could access everything either directly (tables :P) or the top right menus
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2014
Differential Revision: https://secure.phabricator.com/D5728
Summary:
Messy POC. I hope I did this one right :P
Refs T2014
Test Plan: Switched browser forcefully into `device-phone`, saw filters in the menu top right. Browsed around Differential in desktop mode, nothing was broken, I think.
Reviewers: epriestley, chad, btrahan
CC: aran, Korvin
Maniphest Tasks: T2014
Differential Revision: https://secure.phabricator.com/D5693
Summary: Tightens up spacing, remove some of the borders, add alpha channel, make them all blue (sorry, red green and yellow are for 'status'). If we want to do more colors just for hovercards, I have a brown and a black in the mock, but would like to try just blue for now.
Test Plan: UIExamples, Tasks, People, Diffs, and Pastes.
Reviewers: epriestley, AnhNhan, btrahan
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5609
Summary:
Also join concepts of installed and enabled applications.
Also respect uninstalled Maniphest where disabled Maniphest was checked.
Test Plan:
Visited T1, D1.
Uninstalled Maniphest then visited T1, D1.
Disabled Maniphest then visited T1.
Visited /config/edit/maniphest.enabled/.
Reviewers: epriestley, Afaque_Hussain, edward
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5602
Summary:
Refs T1048
Adding Differential Hovercard EventListener
Adding People Hovercard EventListener
Adding basic Diffusion hovercard
Adding Conpherence Hovercard EventListener
Test Plan:
Used in a combo with working hovercards. So beautiful.
Also visited test page. Works alright.
awesometown
Reviewers: epriestley, chad, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1048
Differential Revision: https://secure.phabricator.com/D5576
Summary:
So I don't have to copy/paste everything again.
Used them at places I could find with my limited `grep` skills.
Test Plan: Visited hovercards, revision and tasks. No crashes.
Reviewers: epriestley, btrahan, chad
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5592
Summary:
This sets more reasonable values for the object handle fields imo. It's not like I ever want to find out what letter to use and then do `substr($handle->getType(), 0, 1).$handle->getID()` to get `D1` each time I use handles.
Name:
- D1
- T1
- M1
- P1
- etc.
Fullname:
- D1: Something
- T1: Something
- etc.
In addition, this helps me to reasonable prefill Hovercards in case there is no application-specific event listener.
Also deletes `title` and `alternateID` completely. They deserved that.
Test Plan:
Visited places, nothing broke (We only ever used `$handle->getName()` for users and commits).
Tested mail reply handler. Did not test the other way around, but should be fine.
Hovercards broken until D5572 (would love to induce a cyclic dependency)
Reviewers: epriestley, chad, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5571
Summary:
Well, I'm just putting it into the DAO classes, or am I doing something wrong?
Will be used by future event listeners
Test Plan: Visited some tasks and revisions. Look fine.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5542
