Summary:
- Use edges to store "X depends on Y" information in Maniphest.
- Show both "Depends On" and "Dependent Tasks".
- Migrate all the old edges.
Test Plan:
- Added some relationships, migrated, verified they were preserved.
- Added some new valid relationships, verified tasks got updated with sensible transactions and sent reasonable emails.
- Tried to add a cycle, got an ugly but effective error.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D3006
Summary: This should simplify a bunch of stuff in D3006 and D3003.
Test Plan: Will update D3006.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3010
Summary: See D3006, D3007. Make it easier to do migrations like that without holding all results in memory.
Test Plan:
Ran this code with an artificially small page size (2):
foreach (new LiskMigrationIterator(new DifferentialRevision()) as $rev) {
echo "Revision ".$rev->getID()."\n";
}
Verified each revision as loaded and processed.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D3008
'phd status' should have a stable result when invoked multiple times.
Automatically removing PID files for dead daemons every time 'phd status' is
invoked prevents tools from noticing that a daemon has died if something
happens to invoke 'phd status' before the tool looks. This affects Puppet
noticably, since it probably runs the status command every half hour.
'phd status' may be invoked by tools (such as puppet) which need to make
automated decisions about whether to start/restart the daemon. To enable this,
'phd status' now exits with 0 if all daemons are running, 1 if no daemons are
running, and 2 if some (but not all) daemons are running.
Summary:
Lisk currently behaves in two different ways if you call it like `load("cow")` (throws) versus `load(99999999)` (returns null), where neither ID exists.
This was intended to catch programming errors as distinct from missing data, but in practice the former is very rare and you have to handle the latter in most cases anyway. The case where you pass "0" is particularly confusing. See D2971 for an example.
On the balance, I think this ends up being far more confusing than helpful. Instead, just return NULL if we're sure there's no such object.
Test Plan: Reasoned about program behavior.
Reviewers: alanh, btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2977
Summary: http://www.networksorcery.com/enp/protocol/irc.htm
Test Plan: augment code with an additional debug line (phlog('hi');) so I can see my case was trigged and it will fall through. setup an ill-configured IRC server with ngircd. Configure an ircbot to connect to said ill-configured IRC server. verify ircbot connected to channel. verify in irc bot logs that debug line was invoked.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1452
Differential Revision: https://secure.phabricator.com/D2962
Summary: Allow the GC daemon to collect the new markup cache.
Test Plan: Ran gc daemon in "debug" mode, saw it collect cache entries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2947
Summary:
- See D2945.
- Drop `cache` field from ManiphestTransaction.
- Render task descriptions and transactions through PhabricatorMarkupEngine.
- Also pull the list of macros more lazily.
Test Plan:
- Verified transactions and transaction preview work correctly and interact with cache correctly.
- Verified tasks descriptions and task preview work correctly.
- Verified we don't hit the imagemacro table when we're rendering everything from cache anymore.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2946
Summary:
The immediate issue this addresses is T1366, adding a rendering cache to Phriction. For wiki pages with code blocks especially, rerendering them each time is expensive.
The broader issue is that out markup caches aren't very good right now. They have three major problems:
**Problem 1: the data is stored in the wrong place.** We currently store remarkup caches on objects. This means we're always loading it and passing it around even when we don't need it, can't genericize cache management code (e.g., have one simple script to drop/GC caches), need to update authoritative rows to clear caches, and can't genericize rendering code since each object is different.
To solve this, I created a dedicated cache database that I plan to move all markup caches to use.
**Problem 2: time-variant rules break when cached.** Some rules like `**bold**` are time-invariant and always produce the same output, but some rules like `{Tnnn}` and `@username` are variant and may render differently (because a task was closed or a user is on vacation). Currently, we cache the raw output, so these time-variant rules get locked at whatever values they had when they were first rendered. This is the main reason Phriction doesn't have a cache right now -- I wanted `{Tnnn}` rules to reflect open/closed tasks.
To solve this, I split markup into a "preprocessing" phase (which does all the parsing and evaluates all time-invariant rules) and a "postprocessing" phase (which evaluates time-variant rules only). The preprocessing phase is most of the expense (and, notably, includes syntax highlighting) so this is nearly as good as caching the final output. I did most of the work here in D737 / D738, but we never moved to use it in Phabricator -- we currently just do the two operations serially in all cases.
This diff splits them apart and caches the output of preprocessing only, so we benefit from caching but also get accurate time-variant rendering.
**Problem 3: cache access isn't batched/pipelined optimally.** When we're rendering a list of markup blocks, we should be able to batch datafetching better than we do. D738 helped with this (fetching is batched within a single hunk of markup) and this improves batching on cache access. We could still do better here, but this is at least a step forward.
Also fixes a bug with generating a link in the Phriction history interface ($uri gets clobbered).
I'm using PHP serialization instead of JSON serialization because Remarkup does some stuff with non-ascii characters that might not survive JSON.
Test Plan:
- Created a Phriction document and verified that previews don't go to cache (no rows appear in the cache table).
- Verified that published documents come out of cache.
- Verified that caches generate/regenerate correctly, time-variant rules render properly and old documents hit the right caches.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1366
Differential Revision: https://secure.phabricator.com/D2945
Summary:
Certain types of things we should be storing in edges (notably, Task X depends on Task Y) should always be acyclic. Allow `PhabricatorEdgeEditor` to enforce this, since we can't correctly enforce it outside of the editor without being vulnerable to races.
Each edge type can be marked acyclic. If an edge type is acyclic, we perform additional steps when writing new edges of that type:
- We acquire a global lock on the edge type before performing any reads or writes. This ensures we can't produce a cycle as a result of a race where two edits add edges which independently do not produce a cycle, but do produce a cycle when combined.
- After performing writes but before committing transactions, we load the edge graph for each acyclic type and verify that it is, in fact, acyclic. If we detect cycles, we abort the edit.
- When we're done, we release the edge type locks.
This is a relatively high-complexity change, but gives us a simple way to flag an edge type as acyclic in a robust way.
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D2940
Summary:
Currently, multiple unit tests that acquire global locks will interfere with each other. Namespace the locks so they don't.
(Possibly we should also rename this to PhabricatorStorageNamespaceLock or something since it's not really global any more, but that's kind of unwieldy...)
Test Plan: Acquired locks with --trace and verified they were namespaced properly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D2939
Summary:
In unit tests which use fixtures, we open transactions on every connection we establish. However, since we don't track connections that are established with "$force_new" (currently, only GlobalLock connections) we never close these transactions normally.
Instead of not tracking these connections, track them using unique keys so we'll never get a cache hit on them.
Test Plan: Built unit tests on top of this, had them stop dying from unclosed transactions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D2938
Summary:
A later diff adds unit tests against edges, but we need real objects to connect with edges. Add some trivial objects to the Harbormaster database to compliment the similar HarbormasterScratchTable.
On its own, this does nothing interesting.
Test Plan: Built unit tests on this in a followup.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D2937
Summary:
See discussion here:
https://secure.phabricator.com/chatlog/channel/%23phabricator/?at=21186
Basically, MySQL usually raises a good error if we exceed "max_allowed_packet":
EXCEPTION: (AphrontQueryException) #1153: Got a packet bigger than 'max_allowed_packet' bytes
But sometimes it gives us a #2006 instead. This is documented, at least:
>"With some clients, you may also get a Lost connection to MySQL server during query error if the communication packet is too large."
http://dev.mysql.com/doc/refman//5.5/en/packet-too-large.html
Try to improve the error message to point at this as a possible explanation.
Test Plan: Faked an error, had it throw, read exception message. See also chatlog.
Reviewers: btrahan, skrul
Reviewed By: skrul
CC: aran
Differential Revision: https://secure.phabricator.com/D2923
Summary: See D2924.
Test Plan: Ran locks with blocking timeouts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2925
Summary: See D2906. This just adds text so they render pretty.
Test Plan:
Got pretty emails and rendered transactions.
{F13706}
Reviewers: btrahan, davidreuss
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2907
Summary:
- See D2741.
- When EdgeEditor performs edits, emit events.
- Listen for Maniphest edge events and save the changes as transactions.
- Do all this in a reasonably generic way that won't take too much rewriting as we use edges more generally.
Test Plan: Attached and detached commits from tasks, saw reasonable-looking transactions spring into existence.
Reviewers: btrahan, davidreuss
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2906
Summary: Simplify FeedQuery by making it extend from PhabricatorIDPagedPolicyQuery
Test Plan: Looked at feed on home, projects, user profile, and called `feed.query`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2905
Summary: Implementation is a little crazy but this seems to work as advertised.
Test Plan: Acquired locks with "lock.php". Verified they held as long as the process reamined open and released properly on kill -9, ^C, etc.
Reviewers: nh, jungejason, vrana, btrahan, Girish, edward
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1400
Differential Revision: https://secure.phabricator.com/D2864
Summary: Related to D2873.
Test Plan: Specified it and verified that highlighting still works.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2874
Summary:
Support the `--verbose` flag added in D2795 in `phd`. See T1389.
Also simplify argument generation a little bit.
Test Plan: Ran "nice" daemon with debug, daemon + verbose, daemon + no verbose.
Reviewers: vrana, jungejason, edward, aurelijus
Reviewed By: aurelijus
CC: aran
Maniphest Tasks: T1389
Differential Revision: https://secure.phabricator.com/D2797
Summary: I tried also filling the column by empty space but this looks better.
Test Plan: Displayed a comment both with visible and hidden inlines.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1216
Differential Revision: https://secure.phabricator.com/D2789
Summary: It requires `allow_url_fopen` which we don't check in setup and our installation is about to disable it.
Test Plan:
Login with OAuth.
/oauth/facebook/diagnose/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2787
Test Plan:
Altered database.
Wrote a custom translation and selected it in preferences.
Verified that the text is custom translated.
Set language back to default.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D2757
Summary:
This is the first step in Phabricator internationalization.
It adds a translation selector and calls it at startup.
Installations can add custom selectors to override some texts.
We can add official translations in future.
Next step is to allow user to choose his translation which will override the global one.
This is currently used only for English plurals.
Test Plan: Displayed a diff with unit test error, verified that it says 'Detail' or 'Details' and not 'Detail(s)'.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D2753
Summary:
Some e-mail clients display this header and it needs to be constant.
This is somehow involved but I doubt that there is a simpler solution.
Test Plan:
Applied SQL patch.
Commented on revision, commented on commit, changed package.
Verified that the `Thread-Topic` has constant and human readable value.
Reviewers: epriestley
Reviewed By: epriestley
CC: ola, aran, Korvin
Differential Revision: https://secure.phabricator.com/D2745
Summary: This is //extremely// basic but dead simple and should cover us for v1, I think. Let me know what features you need.
Test Plan: Used UI example page.
Reviewers: allenjohnashton, ddfisher, keebuhm
Reviewed By: ddfisher
CC: aran, ender
Maniphest Tasks: T944
Differential Revision: https://secure.phabricator.com/D2732
Summary: Made it possible to link and unlink LDAP accounts with Phabricator accounts.
Test Plan:
I've tested this code locally and in production where I work.
I've tried creating an account from scratch by logging in with LDAP and linking and unlinking an LDAP account with an existing account. I've tried to associate the same LDAP account with different Phabricator accounts and it failed as expected.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, auduny, svemir
Maniphest Tasks: T742
Differential Revision: https://secure.phabricator.com/D2722
Summary:
HPHP doesn't like resolved symlinks.
Also I like this code better.
Test Plan: Used and not used custom Celerity map.
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2694
Summary: Added `PhabricatorBuiltinPatchList` entry so that "storage upgrade" will update the database. Renamed and numbered the notification.sql patch.
Test Plan: Drop phabricator_feed.feed_storynotification table if it exists and run bin/storage upgrade to check if the patch is correctly applied.
Reviewers: epriestley, btrahan, allenjohnashton
Reviewed By: epriestley
CC: ddfisher, aran, Korvin
Differential Revision: https://secure.phabricator.com/D2687
Summary:
- The config is called "resource-path" and the script references "resource-path", but the actual value checked for is "resource-map".
- Use nonempty(), since defaulting with getEnvConfig() will give you null if the setting exists but is set to null. This default is nearly useless so maybe we should change it to use coalesce().
- Remove Celerity map initialization from warmup. We don't currently initialize the environment in warmup, and Celerity initialization now depends on the environment.
Test Plan: Ran patch locally and on FPM-Warmup.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: hsb, aran
Differential Revision: https://secure.phabricator.com/D2662
Summary:
See T1303, which presents a reasonable case for inclusion of these characters in valid usernames.
Also, unify username validity handling.
Test Plan: Created a new user with a valid name. Tried to create a new user with an invalid name. Ran unit tests.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1303
Differential Revision: https://secure.phabricator.com/D2651
Summary: replace differential.find with differential.query and display in requested order
Test Plan: say D444D222D443D442 and ensure they are in the correct order
Reviewers: epriestley
Reviewed By: epriestley
CC: Mnkras, aran
Differential Revision: https://secure.phabricator.com/D2656
Summary:
We have custom static resources.
We currently include them in Phabricator's celerity resource map which is causing some pain - we need to regenerate the file without our custom resources before pushing upstream, we need to discard our changes before pulling from upstream and we need to rebuild with our changes to run Phabricator.
This diff allows writing and reading the map in other location.
The plan is this - I will run `celerity_mapper.php` twice - once to build Phabricator-only resources (to push to upstream) and once to build Phabricator + ours resoruces to put in our directory.
Better solution would be to create a map just with our resources and read and combine it with Phabricator resources.
But it is complicated because we have dependencies on Phabricator resources.
Test Plan:
`celerity_mapper.php webroot`
`celerity_mapper.php webroot ../facebook/src/__celerity_resource_map__.php`
Delete Phabricator's celerity map, set 'celerity.resource-path' and successfully load Phabricator.
Reviewers: epriestley, edward
Reviewed By: epriestley
CC: aran, Koolvin
Maniphest Tasks: T721
Differential Revision: https://secure.phabricator.com/D2630
Summary:
- `kill_init.php` said "Moving 1000 files" - I hope that this is not some limit in `FileFinder`.
- [src/infrastructure/celerity] `git mv utils.php map.php; git mv api/utils.php api.php`
- Comment `phutil_libraries` in `.arcconfig` and run `arc liberate`.
NOTE: `arc diff` timed out so I'm pushing it without review.
Test Plan:
/D1234
Browsed around, especially in `applications/repository/worker/commitchangeparser` and `applications/` in general.
Auditors: epriestley
Maniphest Tasks: T1103
