Summary:
Ref T13493. The "AuthAccountView" UI element currently exposes raw account ID values, but I'm trying to make these many-to-one.
This isn't terribly useful as-is, so get rid of it. This element could use a design refresh in general.
Test Plan: Viewed the UI element in "External Accounts".
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21010
Summary:
See PHI1647, which asks for "vscode://" to be a configurable protocol on hosted Phacility instances.
I made the configuration editable in D21008, but this can reasonably just come upstream too.
Test Plan: Viewed config in Config, set my editor URI to `vscode://blahblah`.
Differential Revision: https://secure.phabricator.com/D21009
Summary:
Ref T13493. I'm updating callers to `getAccountID()` to prepare to move it to a separate table.
This callsite once supported this flow:
- External users with no accounts send mail to `bugs@`.
- This creates tasks in Maniphest.
- They're CC'd when the tasks are updated.
However, after T12237 we never actually send this mail (since their addresses are necessarily unverified).
I left this code in in case this needed to be revisited, but it hasn't been an issue. Just remove it and treat these users as undeliverable.
Test Plan: As a cursory test for nothing being horribly broken, sent some object mail.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21007
Summary:
Ref T13395. No library with this name loads any more, so we can't version check it.
(Ideally, the version check stuff would be more graceful when it fails now, since it's required to load "Config" after I moved it off a separate page.)
Test Plan: Loaded "Config".
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20995
Summary: Ref T13395. Since there's very little code which really makes sense in "scripts/", I've moved most of it to other places.
Test Plan: Ran `bin/phd`.
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20994
Summary: Fixes T2543. This mode has been a stable prototype for a very long time now; promote it so "--draft" can promote out of "experimental" in Arcanist.
Test Plan: See T2543 for discussion.
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D20983
Summary: Ref T13395. Moves a small amount of remaining "libphutil/" code into "phabricator/" and stops us from loading "libphutil/".
Test Plan: Browsed around; there are likely remaining issues.
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20981
Summary: Ref T13395. Move cache classes, syntax highlighters, other markup classes, and sprite sheets to Phabricator.
Test Plan: Attempted to find any callers for any of this stuff in libphutil or Arcanist and couldn't.
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20977
Summary:
`diffusion.branchquery` can return dictionary instead of array if some branches are filtered out.
Eg.:
```
{
"result": [
{
"shortName": "master",
"commitIdentifier": "2817b0d8f79748ddfad0220c46d9b20bea34f460",
"refType": "branch",
"rawFields": {
"objectname": "2817b0d8f79748ddfad0220c46d9b20bea34f460",
"objecttype": "commit",
```
might become:
```
{
"result": {
"1": {
"shortName": "master",
"commitIdentifier": "2817b0d8f79748ddfad0220c46d9b20bea34f460",
"refType": "branch",
"rawFields": {
"objectname": "2817b0d8f79748ddfad0220c46d9b20bea34f460",
"objecttype": "commit",
```
Reproduction - find repository which has couple of branches, setup to track only some of them, execute `diffusion.branchquery` API call - result is dictionary instead of array
Test Plan: Apply patch, execution `diffusion.branchquery` call - result is no longer dictionary if it was one before
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D20973
Summary: Ref T13395. Moves some Aphront classes from libphutil to Phabricator.
Test Plan: Grepped for symbols in libphutil and Arcanist.
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20975
Summary:
Fixes T5427. See PHI1630. See also T13160 and D20568.
In the full HTML table syntax with "<table>", respect linebreaks as literals inside "<td>" cells.
Test Plan: Previewed some full-HTML tables with and without linebreaks, saw what seemed like sensible rendering behavior.
Maniphest Tasks: T5427
Differential Revision: https://secure.phabricator.com/D20971
Summary: Ref T10635. An install with large blocks of remarkup (4MB) in test details is reporting slow page rendering. This is expected, but I've mostly given up on fighting this unless I absolutely have to. Degrade the interface more aggressively.
Test Plan:
- Submitted a large block of test details in remarkup format.
- Before patch: they rendered inline.
- After patch: degraded display.
- Verified small blocks are not changed.
{F7180727}
{F7180728}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T10635
Differential Revision: https://secure.phabricator.com/D20970
Summary: Ref T13486. Currently, "Zarbo" sorts above "alice", but this isn't expected for a list of (mostly) human usernames.
Test Plan: Loaded a task with subscribers with mixed-case usernames.
Maniphest Tasks: T13486
Differential Revision: https://secure.phabricator.com/D20969
Summary: Fixes T13487. In PHI1628, an install has a 4MB remarkup corpus which takes a long time to render. This is broadly expected, but a few reasonable improvements fell out of running it through the profiler.
Test Plan:
- Saw local cold-cache end-to-end rendering time drop from 12s to 4s for the highly secret input corpus.
- Verified output has the same hashes before/after.
- Ran all remarkup unit tests.
Maniphest Tasks: T13487
Differential Revision: https://secure.phabricator.com/D20968
Summary:
Depends on D20966. Ref T13486. Curtains currently render subscribers in a plain text list, but the new ref list element is a good fit for this.
Also, improve the sorting and ordering behavior.
This makes the subscriber list take up a bit more space, but it should make it a lot easier to read at a glance.
Test Plan: Viewed object subscriber lists at varying limits and subscriber counts, saw sensible subscriber lists.
Maniphest Tasks: T13486
Differential Revision: https://secure.phabricator.com/D20967
Summary:
Ref T13486. When a curtain element like "Author" in Maniphest has a very long username, the wrapping and overflow behavior is poor: the date is obscured.
Adjust curtain elements which contain lists of references to other objects to improve wrapping behavior (put the date on a separate line) and overflow behavior (so we get a "..." when a name overflows).
Test Plan: {F7179376}
Maniphest Tasks: T13486
Differential Revision: https://secure.phabricator.com/D20966
Summary: Fixes T13335. When processing quoted blocks, we remove leading empty lines. This logic incorrectly continued after encountering a nonempty line.
Test Plan: Added a test, made it pass. Previewed blocks in web UI.
Maniphest Tasks: T13335
Differential Revision: https://secure.phabricator.com/D20965
Summary: Fixes T13485. GitHub has deprecated the "access_token" URI parameter for API authentication. Update to "Authorization: token ...".
Test Plan: Linked and unlinked a GitHub account locally.
Maniphest Tasks: T13485
Differential Revision: https://secure.phabricator.com/D20964
Summary: Ref T13480. Creating a rule in Herald currently uses the older radio-button flow. Update it to the "clickable menu" flow to simplify it a little bit.
Test Plan: Created new personal, object, and global rules. Hit the object rule error conditions.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20956
Summary:
Fixes T13463. Currently, if you use the web UI to set "Related Tasks" for a revision, the resulting commit does not link to the tasks.
If you use "Ref ..." in the message instead, the resulting commit does link to the tasks.
Broadly, this should all be cleaner (see T3577) but we can step toward better behavior by just copying these edges when commits are published.
Test Plan:
- Created a revision.
- Used the web UI to edit "Related Tasks".
- Landed the revision.
- Saw the commit link to the tasks as though I'd used "Ref ..." in the message.
Maniphest Tasks: T13463
Differential Revision: https://secure.phabricator.com/D20961
Summary:
Depends on D20933. Ref T13362. This reorganizes Config a bit and attempts to simplify it.
Subsections are now in a landing page console and groupings have been removed. We "only" have 75 values you can edit from the web UI nowadays, which is still a lot, but less overwhelming than it was in the past. And the trend is generally downward, as config is removed/simplified or moved into application settings.
This also gets rid of the "gigantic blobs of JSON in the UI".
Test Plan: Browsed all Config sections.
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20934
Summary: Depends on D20931. Ref T13362. Move all "Console"-style interfaces to use a consistent layout based on a new "LauncherView" which just centers the content.
Test Plan: Viewed all affected interfaces.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20933
Summary: Depends on D20930. Ref T13362. Put all the "Services" parts of Config in their own section.
Test Plan: Clicked through each section. This is just an organization / UI change with no significant behavioral impact.
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20931
Summary:
Ref T13362. Config is currently doing a ton of stuff and fairly overwhelming. Separate out "Modules/Extensions" so it can live in its own section.
(This stuff is mostly useful for development and normal users rarely need to end up here.)
Test Plan: Visited seciton, clicked around. This is just a visual change.
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20930
Summary:
Ref T13484. If you load a subproject S which has a mangled/invalid `parentPath`, the query currently tries to execute an empty edge query and fatals.
Instead, we want to deny-by-default in the policy layer but not fail the query. The subproject should become restricted but not fatal anything related to it.
See T13484 for a future refinement where we could identify "broken / data integrity issue" objects explicilty.
Test Plan:
- Modified the `projectPath` of some subproject in the database to `QQQQ...`.
- Loaded that project page.
- Before patch: fatal after issuing bad edge query.
- After patch: "functionally correct" policy layer failure, although an explicit "data integrity issue" failure would be better.
Maniphest Tasks: T13484
Differential Revision: https://secure.phabricator.com/D20963
Summary: Ref T13480. Some Herald fields need audit information, which recent changes to Herald adapters discarded. For now, just load it unconditionally.
Test Plan: Triggered an Audit-related rule locally.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20962
Summary:
Fixes T13468. See that task for discussion. The older source-rendering code mixes "line number" / "1-based" lists with "block number" / "0-based" lists and then has other bugs which cancel this out.
For block-based diffs, build an explicit block-based mask with only block numbers. This sort of sidesteps the whole issue.
Test Plan: Viewed the diff with the original reproduction case, plus various other block-based diffs, including one-block image diffs, in unified and side-by-side mode. Didn't spot any oddities.
Maniphest Tasks: T13468
Differential Revision: https://secure.phabricator.com/D20959
Summary:
Fixes T13475. Sometimes, we issue a "no op" / "default permit" / "unchallenged" MFA token, when a user with no MFA configured does something which is configured to attempt (but not strictly require) MFA.
An example of this kind of action is changing a username: usernames may be changed even if MFA is not set up.
(Some other operations, notably "Sign With MFA", strictly require that MFA actually be set up.)
When a user with no MFA configured takes a "try MFA" action, we see that they have no factors configured and issue a token so they can continue. This is correct. However, this token causes the assocaited timeline story to get an MFA badge.
This badge is incorrect or at least wildly misleading, since the technical assertion it currently makes ("the user answered any configured MFA challenge to do this, if one exists") isn't explained properly and isn't useful anyway.
Instead, only badge the story if the user actually has MFA and actually responded to some kind of MFA challege. The badge now asserts "this user responded to an MFA challenge", which is expected/desired.
Test Plan:
- As a user with no MFA, renamed a user. Before patch: badged story. After patch: no badge.
- As a user with MFA, renamed a user. Got badged stories in both cases.
Maniphest Tasks: T13475
Differential Revision: https://secure.phabricator.com/D20958
Summary: Fixes T13480. Adds the remaining missing Owners package rules for Herald commit adapters.
Test Plan: Created hooks which care about these fields, pushed commits, saw sensible transcript values.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20957
Summary: Ref T13480. The Herald "Commit" rules still use raw commit data properties to identify authors and committers. Instead, use repository identities.
Test Plan: Wrote a Herald rule using all four fields, ran it against various commits with and without known authors. Checked transcript for sensible field values.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20955
Summary:
Ref T13480. Currently, Herald commit hook rules use a raw address resolution query to identify the author and committer for a commit. This will get the wrong answer when the raw identity string has been explicitly bound to some non-default user (most often, it will fail to identify an author when one exists).
Instead, use the "IdentityEngine" to properly resolve identities.
Test Plan: Authored a commit as `X <y@example.com>`, a raw identity with no "natural" matches to users (e.g., no user with that email or username). Bound the identity to a particular user in Diffusion. Wrote a Herald pre-commit content rule, pushed the commit. Saw Herald recognize the correct user when evaluating rules.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20953
Summary:
Ref T13480. Currently, some Herald field types are rendered in an unfriendly way on transcripts. Particularly, PHID lists are rendered as raw PHIDs.
Improve this by delegating rendering to Value objects and letting "PHID List" value objects render more sensible handle lists. Also improve "bool" fields a bit and make more fields render an explicit "None" / empty value rather than just rendering nothing.
Test Plan: Viewed various transcripts, including transcripts covering boolean values, the "Always" condition, large blocks of text, and PHID lists.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20951
Summary:
Ref T13480. Currently, when Herald renders a transcript, it puts display labels into array keys. This is a bad pattern for several reasons, notably that the values must be scalar (so you can't add icons or other markup later) and the values must be unique (which is easily violated because many values are translated).
Instead, keep values as list items.
Test Plan: Viewed Herald transcripts, saw no (meaningful) change in rendering output.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20949
Summary: Ref T13480. When Herald renders rules, it partly uses a very old handle pre-loading mechanism where PHIDs are extracted and loaded upfront. This was obsoleted a long time ago and was pretty shaky even when it worked. Get rid of it to simplify the code a little.
Test Plan: Viewed Herald rules rendered into static text with PHID list actions, saw handles. Grepped for all affected methods.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20948
Summary: Fixes T13482. Although this style makes physical sense by relationship to a written checklist, it seems to do more harm than good in practice.
Test Plan: Wrote a checklist with a checked-off item in remarkup, saw no more line-through.
Maniphest Tasks: T13482
Differential Revision: https://secure.phabricator.com/D20954
Summary: Ref T13480. Add an "Author's packages" field to Herald to support writing rules like "if affected packages include X, and author's packages do not include X, raise the alarm".
Test Plan: Wrote and executed rules with the field, saw a sensible field value in the transcript.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20947
Summary: Ref T13480. These fields don't serve a specific strong use case, but are broadly reasonable capabilities after "state" vs "change" actions were relaxed by T13283.
Test Plan: Wrote rules using the new fields, added and removed projects (and did neither) to fire them / not fire them. Inspected the transcripts to see the project PHIDs making it to the field values.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20946
Summary:
Fixes T13479. The behavior of "git rev-parse --show-toplevel" has changed in Git 2.25.0, and it now fails in bare repositories.
Instead, use "git rev-parse --git-dir" to sanity-check the working copy. This appears to have more stable behavior across Git versions, although it's a little more complicated for our purposes.
Test Plan:
- Ran `bin/repository update ...` on an observed, bare repository.
- ...on an observed, non-bare ("legacy") repository.
- ...on a hosted, bare repository.
Maniphest Tasks: T13479
Differential Revision: https://secure.phabricator.com/D20945
Summary: Fixes T13476. Policy tags in object headers and "Visible To" controls in some dialog contexts may stack and wrap oddly. Improve spacing so they don't overlap visually when wrapping.
Test Plan: Viewed affected interfaces in narrow and wide windows.
Maniphest Tasks: T13476
Differential Revision: https://secure.phabricator.com/D20944
Summary:
Fixes T13471. Recent versions of PHP raise a warning when this function is called.
We're only calling it so we can instantly fatal if it's enabled, so use "@" to silence the warning.
Test Plan: Loaded site; see also T13471 for a user reporting that this fix is effective.
Maniphest Tasks: T13471
Differential Revision: https://secure.phabricator.com/D20942
Summary: Fixes T13472. This library uses `$a{0}`, but this is deprecated in favor of `$a[0]`.
Test Plan:
Ran `bin/search index Txxx --force` on a task with "filing" in the title (this term reaches the "m" rule of the stemmer).
(I'm not on new enough PHP for this to actually raise an error, but I'll follow up with the reporting user.)
Maniphest Tasks: T13472
Differential Revision: https://secure.phabricator.com/D20941
Summary: Ref T13472. Ref T13395. These classes are only used by Phabricator and not likely to find much use in Arcanist.
Test Plan: Grepped libphutil and Arcanist for removed symbols.
Maniphest Tasks: T13472, T13395
Differential Revision: https://secure.phabricator.com/D20939
Summary:
See <https://hackerone.com/reports/758002>. The link rules don't test that their parameters are flat text before using them in unsafe contexts.
Since almost all rules are lower-priority than these link rules, this behavior isn't obvious. However, two rules have broadly higher priority (monospaced text, and one variation of link rules has higher priority than the other), and the latter can be used to perform an XSS attack with input in the general form `()[ [[ ... | ... ]] ]` so that the inner link rule is evaluated first, then the outer link rule uses non-flat text in an unsafe way.
Test Plan:
Tested examples in HackerOne report. A simple example of broken (but not unsafe) behavior is:
```
[[ `x` | `y` ]]
```
Differential Revision: https://secure.phabricator.com/D20937
Summary: Maniphest object has `getURI` method, let's use it
Test Plan: Create event in task - URI generated as expected in email notification
Reviewers: epriestley, Pawka, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20935
Summary:
Ref T13362. Some applications moved to fixed-width a while ago but I was generally unsatisfied with where they ended up and have been pushing them back to full-width.
Push Config back to full-width. Some of the subpages end up a little weird, but this provides more space to work with to make some improvements, like makign `maniphest.statuses` more legible in the UI>
Test Plan: Grepped for `setFixed(`, updated each page in `/config/`. Browsed each controller, saw workable full-width UIs.
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20925
Summary:
See PHI1558. Ref T11860. Ref T13444. I partly implemented PHIDs for "UserEmail" objects, but they can't load on their own so you can't directly `bin/remove destroy` them yet.
Allow them to actually load by implementing "PolicyInterface".
Addresses are viewable and editable by the associated user, unless they are a bot/list address, in which case they are viewable and editable by administrators (in preparation for T11860). This has no real impact on anything today.
Test Plan:
- Used `bin/remove destroy <phid>` to destroy an individual email address.
- Before: error while loading the object by PHID in the query policy layer.
- After: clean load and destroy.
Maniphest Tasks: T13444, T11860
Differential Revision: https://secure.phabricator.com/D20927
Summary: Fixes T13465. This "phlog()" made some degree of sense at one time, but is no longer useful or consistent. Get rid of it. See T13465 for discussion.
Test Plan: Made a conduit call that hit a policy error, no longer saw error in log.
Maniphest Tasks: T13465
Differential Revision: https://secure.phabricator.com/D20924
Summary:
Fixes T13464. Fully-realized paths have a "path" (normalized, effective path) and a "display" path (user-facing, un-normalized path).
During transaction validation we build ref keys for paths before we normalize the "display" values. A few different approaches could be taken to resolve this, but just default the "display" path to the raw "path" if it isn't present since that seems simplest.
Test Plan: Edited paths in an Owners package, no longer saw a warning in the logs.
Maniphest Tasks: T13464
Differential Revision: https://secure.phabricator.com/D20923
