Summary: Ref T13222. Ref T920. This is the last of the upstream adapter updates.
Test Plan:
- Sent mail with SES.
- Sent mail with "sendmail". I don't have sendmail actually configured to an upstream MTA so I'm not 100% sure this worked, but the `sendmail` binary didn't complain and almost all of the code is shared with SES, so I'm reasonably confident this actually works.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222, T920
Differential Revision: https://secure.phabricator.com/D19965
Summary:
Ref T920. Ref T12404.
- Update to the new "$message" API.
- Remove "encoding". I believe "base64" is always the best value for this since we stopped seeing issues once we changed the default.
- Remove "mailer". This is a legacy option that makes little sense given how configuration now works.
- Rename to "SMTP". This doesn't affect users anymore since this mailer has been configured as `smtp` for about a year.
- This does NOT add a timeout since the SMTP code is inside PHPMailer (see T12404).
Test Plan: Sent messages with many mail features via GMail SMTP and SendGrid SMTP.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12404, T920
Differential Revision: https://secure.phabricator.com/D19961
Summary:
See T1024. When "CAN_EDIT" became default in T13186, this was missed as an exception.
Watching shouldn't require "CAN_EDIT", so exempt it.
Test Plan:
- Before change: tried to watch a project I could not edit, got a policy error.
- After change: watched/unwatched a project I could not edit.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19977
Summary:
Ref T920. Ref T5969.
- Update to the new "$message" API.
- Update to Sendgrid v3.
- Add a timeout.
- This removes the "api-user" option, which Sendgrid no longer seems to use.
Test Plan: Sent Sendgrid messages with `bin/mail send-test ...` using subject/headers/attachments/html/to/cc.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: jbrownEP
Maniphest Tasks: T5969, T920
Differential Revision: https://secure.phabricator.com/D19960
Summary: Ref T920. Ref T5969. Update the Mailgun adapter for the API changes and add a timeout.
Test Plan: Configured Mailgun as a mailer, sent mail with subject/to/cc/headers/html/attachments using `bin/mail send-test`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5969, T920
Differential Revision: https://secure.phabricator.com/D19959
Summary: Depends on D19956. Ref T920. Move the TestAdapter to the new API and adjust a couple of tests for the changes.
Test Plan: All tests now pass.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19957
Summary:
Depends on D19955. Ref T920. Ref T5969. Update Postmark to accept new Message objects. Also:
- Update the inbound whitelist.
- Add a little support for `media` configuration.
- Add a service call timeout (see T5969).
- Drop the needless word "Implementation" from the Adapter class tree. I could call these "Mailers" instead of "Adapters", but then we get "PhabricatorMailMailer" which feels questionable.
Test Plan: Used `bin/mail send-test` to send mail via Postmark with various options (mulitple recipients, text vs html, attachments).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5969, T920
Differential Revision: https://secure.phabricator.com/D19956
Summary:
Depends on D19954. Ref T920. This is a step toward a world where "Mailers" are generic and may send messages over a broader array of channels (email, SMS, postal mail).
There are a few major parts here:
- Instead of calling `$mailer->setSubject()`, `$mailer->setFrom()`, etc., build in intermediate `$message` object first, then pass that to the mailer.
- This breaks every mailer! This change on its own does not fix them. I plan to fix them in a series of "update mailer X", "update mailer Y" followups.
- This generally makes the API easier to change in the far future, and in the near future supports mailers accepting different types of `$message` objects with the same API.
- Pull the "build an email" stuff out into a `PhabricatorMailEmailEngine`. `MetaMTAMail` is already a huge object without also doing this translation step. This is just a separation/simplification change, but also tries to fight against `MetaMTAMail` getting 5K lines of email/sms/whatsapp/postal-mail code.
- Try to rewrite the "build an email" stuff to be a bit more straightforward while making it generate objects. Prior to this change, it had this weird flow:
```lang=php
foreach ($properties as $key => $prop) {
switch ($key) {
case 'xyz':
// ...
}
}
```
This is just inherently somewhat hard to puzzle out, and it means that processing order depends on internal property order, which is quite surprising.
Test Plan: This breaks everything on its own; adapters must be updated to use the new API. See followups.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19955
Summary:
Depends on D19952. Ref T13222. Never process mail targets if they match:
- The "default" address which we send mail "From".
- The "void" address which we use as a placholder "To" when we only have "CC" addresses.
- Any address from a list of reserved/administrative names.
The first two prevent loops. The third one prevents abuse.
There's a reasonably well-annotated list of reservations and reasons here:
https://webmasters.stackexchange.com/questions/104811/is-there-any-list-of-email-addresses-reserved-because-of-security-concerns-for-a
Stuff like `support@` seems fine; stuff like `ssladmin@` might let you get SSL certs issued for a domain you don't control.
Also, forbid users from creating application emails with these reserved addresses.
Finally, build the default and void addresses somewhat more cleverly.
Test Plan: Added unit tests, tried to configured reserved addresses, hit the default/void cases manually with `bin/mail receive-test`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: olexiy.myronenko
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19953
Summary:
Fixes T7477. Fixes T13066. Currently, inbound mail is processed by the first receiver that matches any "To:" address. "Cc" addresses are ignored.
**To, CC, and Multiple Receivers**
Some users would like to be able to "Cc" addresses like `bugs@` instead of having to "To" the address, which makes perfect sense. That's the driving use case behind T7477.
Since users can To/Cc multiple "create object" or "update object" addresses, I also wanted to make the behavior more general. For example, if you email `bugs@` and also `paste@`, your mail might reasonably make both a Task and a Paste. Is this useful? I'm not sure. But it seems like it's pretty clearly the best match for user intent, and the least-surprising behavior we can have. There's also no good rule for picking which address "wins" when two or more match -- we ended up with "address order", which is pretty arbitrary since "To" and "Cc" are not really ordered fields.
One part of this change is removing `phabricator.allow-email-users`. In practice, this option only controlled whether users were allowed to send mail to "Application Email" addresses with a configured default author, and it's unlikely that we'll expand it since I think the future of external/grey users is Nuance, not richer interaction with Maniphest/Differential/etc. Since this option only made "Default Author" work and "Default Author" is optional, we can simplify behavior by making the rule work like this:
- If an address specifies a default author, it allows public email.
- If an address does not, it doesn't.
That's basically how it worked already, except that you could intentionally "break" the behavior by not configuring `phabricator.allow-email-users`. This is a backwards compatility change with possible security implications (it might allow email in that was previously blocked by configuration) that I'll call out in the changelog, but I suspect that no installs are really impacted and this new behavior is generally more intuitive.
A somewhat related change here is that each receiver is allowed to react to each individual email address, instead of firing once. This allows you to configure `bugs-a@` and `bugs-b@` and CC them both and get two tasks. Useful? Maybe not, but seems like the best execution of intent.
**Sender vs Author**
Adjacently, T13066 described an improvement to error handling behavior here: we did not distinguish between "sender" (the user matching the email "From" address) and "actor" (the user we're actually acting as in the application). These are different when you're some internet rando and send to `bugs@`, which has a default author. Then the "sender" is `null` and the "author" is `@bugs-robot` or whatever (some user account you've configured).
This refines "Sender" vs "Author". This is mostly a purity/correctness change, but it means that we won't send random email error messages to `@bugs-robot`.
Since receivers are now allowed to process mail with no "sender" if they have some default "actor" they would rather use instead, it's not an error to send from an invalid address unless nothing processes the mail.
**Other**
This removes the "abundant receivers" error since this is no longer an error.
This always sets "external user" mail recipients to be unverified. As far as I can tell, there's no pathway by which we send them email anyway (before or after this change), although it's possible I'm missing something somewhere.
Test Plan:
I did most of this with `bin/mail receive-test`. I rigged the workflow slightly for some of it since it doesn't support multiple addresses or explicit "CC" and adding either would be a bit tricky.
These could also be tested with `scripts/mail/mail_handler.php`, but I don't currently have the MIME parser extension installed locally after a recent upgrade to Mojave and suspect T13232 makes it tricky to install.
- Ran unit tests, which provide significant coverage of this flow.
- Sent mail to multiple Maniphest application emails, got multiple tasks.
- Sent mail to a Maniphest and a Paste application email, got a task and a paste.
- Sent mail to a task.
- Saw original email recorded on tasks. This is a behavior particular to tasks.
- Sent mail to a paste.
- Sent mail to a mock.
- Sent mail to a Phame blog post.
- Sent mail to a Legalpad document.
- Sent mail to a Conpherence thread.
- Sent mail to a poll.
- This isn't every type of supported object but it's enough of them that I'm pretty confident I didn't break the whole flow.
- Sent mail to an object I could not view (got an error).
- As a non-user, sent mail to several "create an object..." addresses.
- Addresses with a default user worked (e.g., created a task).
- Addresses without a default user did not work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13066, T7477
Differential Revision: https://secure.phabricator.com/D19952
Summary:
Ref T13222. Ref T13231. See PHI912. I'm planning to turn MFA providers into concrete objects, so you can disable and configure them.
Currently, we only support TOTP, which doesn't require any configuration, but other provider types (like Duo or Yubikey OTP) do require some configuration (server URIs, API keys, etc). TOTP //could// also have some configuration, like "bits of entropy" or "allowed window size" or whatever, if we want.
Add concrete objects for this and standard transaction / policy / query support. These objects don't do anything interesting yet and don't actually interact with MFA, this is just skeleton code for now.
Test Plan:
{F6090444}
{F6090445}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13231, T13222
Differential Revision: https://secure.phabricator.com/D19935
Summary:
D19940 removed this file entirely, which has led to at least one user who was unsure how to proceed now that `cluster.mailers` is required for outbound mail: https://discourse.phabricator-community.org/t/invalid-argument-supplied-for-foreach-phabricatormetamtamail-php/2287
This isn't //always// a setup issue for installs that don't care about sending mail, but this at least this gives a sporting chance to users who don't follow the changelogs.
Also, I'm not sure if there's a way to use `pht()` to generate links; right now the phurl is just in plain text.
Test Plan: Removed `cluster.mailers` config; observed expected setup issue.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19964
Summary: See PHI1017. This is a trivial fix even though these burnups are headed toward a grisly fate.
Test Plan: Moused over some January datapoints, saw "1" instead of "0".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19967
Summary:
After T13217 import_repository_symbols.php was showing a lot of warnings, using %LQ fixes that.
I'm aware, that there are changes planned to the whole managing the symbols complex but until then less warnings are nice.
Test Plan: No more warnings when updating symbols
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D19962
Summary:
Depends on D19953. Ref T9141. We have a "MetaMTAAttachment" object, rename it to "MailAttachment".
Also add a "Header" object and an "EmailMessage" object. Currently, mail adapters have a large number of methods like `setSubject()`, `addTo()`, etc, that I would like to remove.
I'd like the API to be more like `sendMessage(PhabricatorMailExternalMessage $message)`. This is likely a significant simplification anyway, since the implementations of all these methods are just copy/pasted boilerplate anyway (lots of `$this->subject = $subject;`) and this will let Adapters support other message media (SMS, APNS, Whatsapp, etc.)
That's a larger change, but move toward a world where we can build a concrete `$message` object for "email" or "sms".
The `PhabricatorMailEmailMessage` object is just a dumb, flat object representation of the information an adapter needs to actually send mail. The existing `PhabricatorMetaMTAMail` is a much more complex object and has a lot of rich data (delivery status, related object PHIDs, etc) and is a storage object.
The new flow will be something like:
- `PhabricatorMetaMTAMail` (possibly renamed) is the storage object for any outbound message on this channel. It tracks message content, acceptable delivery media (SMS vs email), delivery status, related objects, has a PHID, and has a daemon worker associated with delivering it.
- It builds a `PhabricatorMailExternalMessage`, which is a simple, flat description of the message it wants to send. The subclass of this object depends on the message medium. For email, this will be an `EmailMessage`. This is just a "bag of strings" sort of object, with appropriate flattened values for the adapter to work with (e.g., Email has email addresses, SMS has phone numbers).
- It passes the `ExternalMessage` (which is a `MailMessage` or `SMSMessage` or whatever) to the adapter.
- The adapter reads the nice flat properties off it and turns them into an API request, SMTP call, etc.
This is sort of how things work today anyway. The major change is that I want to hand off a "bag of strings" object instead of calling `setX()`, `setY()`, `setZ()` with each individual value.
Test Plan: Grepped for `MetaMTAAttachment`. This doesn't change any behavior yet.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T9141
Differential Revision: https://secure.phabricator.com/D19954
Summary:
Ref T7477. The various "create a new X via email" applications (Paste, Differential, Maniphest, etc) all have a bunch of duplicate code.
The inheritance stack here is generally a little weird. Extend these from a shared parent to reduce the number of callsites I need to change when this API is adjusted for T7477.
Test Plan: Ran unit tests. This will get more thorough testing once more pieces are in place.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7477
Differential Revision: https://secure.phabricator.com/D19950
Summary:
See PHI1014. We may not have Identities if you race the import pipeline, or in some other cases which are more "bug" / "missing migration"-flavored.
Load the commit data so we can fall back to it if we don't have identities.
Test Plan:
- Wiped out all my identities with `UPDATE ... SET authorIdentityPHID = NULL WHERE ...`.
- Before change: blame fataled with `Attempting to access attached data on PhabricatorRepositoryCommit (via getCommitData()), but the data is not actually attached.`.
- After change: blame falls back gracefully.
- Restored identities with `bin/repository rebuild-identities`, checked blame again.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19958
Summary:
Ref T7477. This option was added in D842 in 2011, to support a specific narrow use case at Quora with community moderators using some kind of weird Gmail config.
I don't recall it ever coming up since then, and a survey of a subset of hosted instances (see T11760) reveals that no instances are using this option today. Presumably, even Quora has completed the onboarding discussed in D842, if they still use Phabricator. This option generally does not seem very useful outside of very unusual/narrow cases like the one Quora had.
This would be relatively easy to restore as a local patch if installs //do// need it, but I suspect this has no use cases anywhere.
Test Plan: Grepped for option, blame-delved to figure out why we added it in the first place, surveyed instances for usage.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7477
Differential Revision: https://secure.phabricator.com/D19949
Summary:
Ref T7477. We have some address normalization code in the reciever stack that is really shared code. I want to introduce some new callsites elsewhere but don't want to put a lot of static calls to other random objects all over the place.
This technically "solves" T7477 (it changes "to" to "to + cc" for finding receivers) but doesn't yet implement proper behavior (with multiple receivers, for example).
Test Plan: Ran unit tests, which cover this pretty well. Additional changes will vet this more thoroughly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7477
Differential Revision: https://secure.phabricator.com/D19948
Summary:
Ref T920. Ref T7477. We currently drop empty mail only once it reaches the `ReplyHandler` layer.
I think no plausible receiver can ever do anything useful with this kind of mail, so we can safely drop it earlier and simplify some of the logic. After T7477, we'd end up throwing multiple exceptions if you sent empty mail to several valid receivers.
(I also want to move away from APIs oriented around raw addresses in more specialized layers, and this is one of the few callsites for raw mail address information.)
This requires updating some unit tests to actually have message bodies, since they failed with this error before hitting the other errors otherwise.
Test Plan: Used `bin/mail receive-test` to send empty mail, got appropriate "err:empty" out of it.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7477, T920
Differential Revision: https://secure.phabricator.com/D19947
Summary:
Ref T12509.
- Remove the "phabricator.csrf-key" configuration option in favor of automatically generating an HMAC key.
- Upgrade two hasher callsites (one in CSRF itself, one in providing a CSRF secret for logged-out users) to SHA256.
- Extract the CSRF logic from `PhabricatorUser` to a standalone engine.
I was originally going to do this as two changes (extract logic, then upgrade hashes) but the logic had a couple of very silly pieces to it that made faithful extraction a little silly.
For example, it computed `time_block = (epoch + (offset * cycle_frequency)) / cycle_frequency` instead of `time_block = (epoch / cycle_frequency) + offset`. These are equivalent but the former was kind of silly.
It also computed `substr(hmac(substr(hmac(secret)).salt))` instead of `substr(hmac(secret.salt))`. These have the same overall effect but the former is, again, kind of silly (and a little bit materially worse, in this case).
This will cause a one-time compatibility break: pages loaded before the upgrade won't be able to submit contained forms after the upgrade, unless they're open for long enough for the Javascript to refresh the CSRF token (an hour, I think?). I'll note this in the changelog.
Test Plan:
- As a logged-in user, submitted forms normally (worked).
- As a logged-in user, submitted forms with a bad CSRF value (error, as expected).
- As a logged-out user, hit the success and error cases.
- Visually inspected tokens for correct format.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12509
Differential Revision: https://secure.phabricator.com/D19946
Summary:
Ref T12509.
- Upgrade an old SHA1 to SHA256.
- Replace an old manually configurable HMAC key with an automatically generated one.
This is generally both simpler (less configuration) and more secure (you now get a unique value automatically).
This causes a one-time compatibility break that invalidates old "Reply-To" addresses. I'll note this in the changelog.
If you leaked a bunch of addresses, you could force a change here by mucking around with `phabricator_auth.auth_hmackey`, but AFAIK no one has ever used this value to react to any sort of security issue.
(I'll note the possibility that we might want to provide/document this "manually force HMAC keys to regenerate" stuff some day in T6994.)
Test Plan: Grepped for removed config. I'll vet this pathway more heavily in upcoming changes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12509
Differential Revision: https://secure.phabricator.com/D19945
Summary:
Ref T920. This simplifies mail configuration.
The "metamta.domain" option is only used to generate Thread-ID values, and we just need something that looks like a bit like a domain in order to make GMail happy. Just use the install domain. In most cases, this is almost certainly the configured value anyway. In some cases, this may cause a one-time threading break for existing threads; I'll call this out in the changelog.
The "metamta.placeholder-to-recipient" is used to put some null value in "To:" when a mail only has CCs. This is so that if you write a local client mail rule like "when I'm in CC, burn the message in a fire" it works even if all the "to" addresses have elected not to receive the mail. Instead: just send it to an unlikely address at our own domain.
I'll add some additional handling for the possiblity that we may receive this email ourselves in the next change, but it overlaps with T7477.
Test Plan: Grepped for these configuration values.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19942
Summary:
Ref T12509. This upgrades a `weakDigest()` callsite to SHA256-HMAC and removes three config options:
- `celerity.resource-hash`: Now hard-coded, since the use case for ever adjusting it was very weak.
- `celerity.enable-deflate`: Intended to make cache inspection easier, but we haven't needed to inspect caches in ~forever.
- `celerity.minify`: Intended to make debugging minification easier, but we haven't needed to debug this in ~forever.
In the latter two cases, the options were purely developer-focused, and it's easy to go add an `&& false` somewhere in the code if we need to disable these features to debug something, but the relevant parts of the code basically work properly and never need debugging. These options were excessively paranoid, based on the static resource enviroment at Facebook being far more perilous.
The first case theoretically had end-user utility for fixing stuck content caches. In modern Phabricator, it's not intuitive that you'd go adjust a Config option to fix this. I don't recall any users ever actually running into problems here, though.
(An earlier version of this change did more magic with `celerity.resource-hash`, but this ended up with a more substantial simplification.)
Test Plan: Grepped for removed configuration options.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12509
Differential Revision: https://secure.phabricator.com/D19941
Summary: Ref T920. We currently embed the Twilio PHP API, but can replace it with about 100 lines of code and get a future-oriented interface as a bonus. Add a Future so we can move toward a simpler calling convention for the API.
Test Plan: Used this future to send SMS messages via the Twilio API.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19937
Summary:
Ref T13222. In D19918, I refactored how timelines get "view data". Today, this is always additional data about which images/changesets/diffs are visible on the current revision/commit/mock, so we can tell if inline comments should be linked to a `#anchor` on the same page (if the inline is rendered there somewhere) or to a `/D123?id=1&vs=2` full link on a different page (if it isn't), but in general this could be any sort of state information about the current page that affects how the timeline should render.
Previously, comment previews did not use any specialized object code and always rendered a "generic" timeline story. This was actually a bug, but none of the code we have today cares about this (since it's all inline related, and inlines render separately) so it never impacted anything.
After the `TimelineEngine` change, the preview renders with Differential-specific code. This is more correct, but we were not passing the preview the "view data" so it broke.
This preview doesn't actually need the view data and we could just make it bail out if it isn't present, but pass it through for consistency and so this works like we'd expect if we do something fancier with view data in the future.
Test Plan: Viewed comment and inline comment previews in Differential, saw old behavior restored.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19943
Summary:
Ref T920. About a year ago (in 2018 Week 6, see D19003) we moved from individually configured mailers to `cluster.mailers`, primarily to support fallback across multiple mail providers.
Since this has been stable for quite a while, drop support for the older options.
Test Plan: Grepped for all removed options.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19940
Summary:
Ref T920. Over time, mail has become much more complex and I think considering "mail", "sms", "postcards", "whatsapp", etc., to be mostly-the-same is now a more promising avenue than building separate stacks for each one.
Throw away all the standalone SMS code, including the Twilio config options. I have a separate diff that adds Twilio as a mail adapter and functions correctly, but it needs some more work to bring upstream.
This permanently destroys the `sms` table, which no real reachable code ever wrote to. I'll call this out in the changelog.
Test Plan:
- Grepped for `SMS` and `Twilio`.
- Ran storage upgrade.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19939
Summary:
Ref T920. D19937 provides about 100 lines of code which can do essentially everything here; throw out the trillion lines of full external API stuff.
(I am generally not sure why everyone writes API libraries like this instead of like D19937.)
Test Plan: Send SMS messages with D19937, so I don't think we need any of this code anymore. This code is techncially reachable through some pathways like `bin/sms`, but won't be for long.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: aurelijus
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19938
Summary: See T12447 for discussion. It is reasonably intuitive to try and pass Conduit parameters via a JSON-encoded HTTP body, but if you do so, you'll get an unhelpful messsage about how method so-and-so does not accept a parameter named "your_entire_json_body". Instead, detect this mistake and advise developers to use form-encoded parameters.
Test Plan:
Got a better error when attempting to make Conduit calls from React code. Tested the following additional invocations of Conduit and got the expected results without an error:
* From the Conduit UI
* With cURL:
```
~ $ curl http://local.phacility.com:8080/api/conpherence.querythread \
> -d api.token=api-tvv2zb565zrtueab5ddprmpxvrwb \
> -d ids[0]=1
```
* With `arc call-conduit`:
```
~ $ echo '{
> "ids": [
> 1
> ]
> }' | arc call-conduit --conduit-uri http://local.phacility.com:8080/ --conduit-token api-tvv2zb565zrtueab5ddprmpxvrwb conpherence.querythread
```
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19944
Summary: Ref T920. Bumped into this while looking at SMS support.
Test Plan: Loaded `/mail/`, no more `qsprintf()` warning.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19936
Summary:
Depends on D19908. Ref T13222. In D19897, I reordered some transaction code and affected the call order of `willApplyTransactions()`.
It turns out that we use this call for only one thing, and that thing is pretty silly: naming the raw paste data file when editing paste content.
This is only user-visible in the URL when you click "View Raw Paste" and seems exceptionally low-value, so remove the hook and pick a consistent name for the paste datafiles. (We could retain the name behavior in other ways, but it hardly seems worthwhile.)
Test Plan:
- Created and edited a paste.
- Grepped for `willApplyTransactions()`.
Note that `EditEngine` (vs `ApplicationTransacitonEditor`) still has a `willApplyTransactions()`, which has one callsite in Phabricator (in Calendar) and a couple in Instances. That's untouched and still works.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19909
Summary:
Depends on D19906. Ref T13222. This isn't going to win any design awards, but make the "wait" and "answered" elements a little more clear.
Ideally, the icon parts could be animated Google Authenticator-style timers (but I think we'd need to draw them in a `<canvas />` unless there's some clever trick that I don't know) or maybe we could just have the background be like a "water level" that empties out. Not sure I'm going to actually write the JS for either of those, but the UI at least looks a little more intentional.
Test Plan:
{F6070914}
{F6070915}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19908
Summary:
Depends on D19905. Ref T13222. In D19843, I refactored this stuff but `$jump_into_hisec` was dropped.
This is a hint to keep the upgraded session in hisec mode, which we need to do a password reset when using a recovery link. Without it, we double prompt you for MFA: first to upgrade to a full session, then to change your password.
Pass this into the engine properly to avoid the double-prompt.
Test Plan:
- Used `bin/auth recover` to get a partial session with MFA enabled and a password provider.
- Before: double MFA prompt.
- After: session stays upgraded when it becomes full, no second prompt.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19906
Summary:
Depends on D19904. Ref T13226. Ref T13222. Currently, partial sessions (where you've provided a primary auth factor like a password, but not yet provided MFA) work like normal sessions: they're good for 30 days and extend indefinitely under regular use.
This behavior is convenient for full sessions, but normal users don't ever spend 30 minutes answering MFA, so there's no real reason to do it for partial sessions. If we add login alerts in the future, limiting partial sessions to a short lifetime will make them more useful, since an attacker can't get one partial session and keep extending it forever while waiting for an opportunity to get past your MFA.
Test Plan:
- Did a partial login (to the MFA prompt), checked database, saw a ~29 minute partial session.
- Did a full login, saw session extend to ~30 days.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13226, T13222
Differential Revision: https://secure.phabricator.com/D19905
Summary:
Depends on D19903. Ref T13222. This was a Facebook-specific thing from D6202 that I believe no other install ever used, and I'm generally trying to move away from the old "event" system (the more modern modular/engine patterns generally replace it).
Just drop support for this. Since the constant is being removed, anything that's actually using it should break in an obvious way, and I'll note this in the changelog.
There's no explicit replacement but I don't think this hook is useful for anything except "being Facebook in 2013".
Test Plan:
- Grepped for `TYPE_AUTH_WILLLOGIN`.
- Logged in.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19904
Summary:
Depends on D19902. Ref T13222. This is mostly a "while I'm in here..." change since MFA is getting touched so much anyway.
Doing cluster support, I sometimes need to log into user accounts on instances that have MFA. I currently accomplish this by doing `bin/auth recover`, getting a parital session, and then forcing it into a full session in the database. This is inconvenient and somewhat dangerous.
Instead, allow `bin/auth recover` to generate a link that skips the "partial session" stage: adding required MFA, providing MFA, and signing legalpad documents.
Anyone who can run `bin/auth recover` can do this anyway, this just reduces the chance I accidentally bypass MFA on the wrong session when doing support stuff.
Test Plan:
- Logged in with `bin/auth recover`, was prompted for MFA.
- Logged in with `bin/auth recover --force-full-session`, was not prompted for MFA.
- Did a password reset, followed reset link, was prompted for MFA.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19903
Summary:
Depends on D19901. Ref T13222. See PHI873. Currently, the MFA code and the (older, not-really-transactional) token code don't play nicely.
In particular, if the Editor throws we tend to get half an effect applied.
For now, just make this work. Some day it could become more modern so that the transaction actually applies the write.
Test Plan: Awarded and rescinded tokens from an MFA-required object.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19902
Summary:
Depends on D19900. Ref T13222. See PHI873. When an object requires MFA, we currently require MFA for every transaction.
This includes some ambiguous cases like "unsubscribe", but also includes "mention", which seems like clearly bad behavior.
Allow an "MFA" object to be the target of mentions, "edit child tasks", etc.
Test Plan:
- Mentioned an MFA object elsewhere (no MFA prompt).
- Made an MFA object a subtask of a non-MFA object (no MFA prompt).
- Tried to edit an MFA object normally (still got an MFA prompt).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19901
Summary:
Depends on D19899. Ref T13222. When we prompt you for one-shot MFA, we currently give you a lot of misleading text about your session staying in "high security mode".
Differentiate between one-shot and session upgrade MFA, and give the user appropriate cues and explanatory text.
Test Plan:
- Hit one-shot MFA on an "mfa" task in Maniphest.
- Hit session upgrade MFA in Settings > Multi-Factor.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19900
Summary:
Depends on D19898. Ref T13222. See PHI873. Allow objects to opt into an "MFA is required for all edits" mode.
Put tasks in this mode if they're in a status that specifies it is an `mfa` status.
This is still a little rough for now:
- There's no UI hint that you'll have to MFA. I'll likely add some hinting in a followup.
- All edits currently require MFA, even subscribe/unsubscribe. We could maybe relax this if it's an issue.
Test Plan:
- Edited an MFA-required object via comments, edit forms, and most/all of the extensions. These prompted for MFA, then worked correctly.
- Tried to edit via Conduit, failed with a reasonably comprehensible error.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19899
Summary:
Depends on D19897. Ref T13222. See some discussion in D19890.
- Only rate limit users if they're actually answering a challenge, not if they're just clicking "Wait Patiently".
- Reduce the number of allowed attempts per hour from 100 back to 10.
- Reduce the TOTP window from +/- 2 timesteps (allowing ~60 seconds of skew) to +/- 1 timestep (allowing ~30 seconds of skew).
- Change the window where a TOTP response remains valid to a flat 60 seconds instead of a calculation based on windows and timesteps.
Test Plan:
- Hit an MFA prompt.
- Without typing in any codes, mashed "submit" as much as I wanted (>>10 times / hour).
- Answered prompt correctly.
- Mashed "Wait Patiently" as much as I wanted (>>10 times / hour).
- Guessed random numbers, was rate limited after 10 attempts.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19898
Summary:
Depends on D19896. Ref T13222. See PHI873. Add a core "Sign With MFA" transaction type which prompts you for MFA and marks your transactions as MFA'd.
This is a one-shot gate and does not keep you in MFA.
Test Plan:
- Used "Sign with MFA", got prompted for MFA, answered MFA, saw transactions apply with MFA metadata and markers.
- Tried to sign alone, got appropriate errors.
- Tried to sign no-op changes, got appropriate errors.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19897
Summary:
See <https://discourse.phabricator-community.org/t/how-to-get-total-time-spent-on-a-task-in-minutes-or-hours/2241>.
Phrequent has two nearly-identical copies of its rendering code: one for old "property event" objects and one for newer "curtain" objects. In the upstream, both trackable object types (tasks and revisions) use curtains, so throw away the old code since it isn't reachable. Third-party trackable objects can update to the curtain UI, but it's unlikely they exist.
Render the remaining curtain UI with more precision, so we show "Time Spent: 2d, 11h, 49m" instead of "Time Spent: 2d".
Test Plan: {F6074404}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19927
Summary:
Depends on D19928. See <https://discourse.phabricator-community.org/t/firehose-webhook-not-working-with-self-hosted-requestbin-instance/2240/>.
Currently, we report "hook" and "silent", which are raw internal codes.
Instead, report human-readable labels so the user gets a better hint about what's going on ("In Silent Mode").
Also, render a "hey, you're in silent mode so none of this will work" reminder banner in this UI.
Test Plan:
{F6074421}
Note:
- New warning banner.
- Table has more human-readable text ("In Silent Mode").
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19929
