Summary: Ref T13073. The new log output from `bin/drydock lease` currently uses HTML handle rendering, but should render to text.
Test Plan: Ran `bin/drydock lease` and saw normal text in log output. Viewed the same logs from the web UI and saw HTML.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19101
Summary:
Depends on D19078. Ref T13073. Currently, there is a narrow window where we can acquire a resource after a reclaim has started against it.
To prevent this, briefly lock resources before acquiring them and make sure they're still good. If a resource isn't good, throw the lease back in the pool.
Test Plan:
This is tricky. You need:
- Hoax blueprint with limits and a rule where leases of a given "flavor" can only be satisfied by resources of the same flavor.
- Reduce the 3-minute "wait before resources can be released" to 3 seconds.
- Limit Hoaxes to 1.
- Allocate one "cherry" flavored Hoax and release the lease.
- Add a `sleep(15)` to `releaseResource()` in `DrydockResourceUpdateWorker`, after the `canReclaimResource()` check, with a `print`.
Now:
- Run `bin/phd debug task` in two windows.
- Run `bin/drydock lease --type host --attributes flavor=banana` in a third window.
- This will start to reclaim the existing "cherry" resource. Once one of the `phd` windows prints the "RECLAIMING" message run `bin/drydock lease --type host --attributes flavor=cherry` in a fourth window.
- Before patch: the "cherry" lease acquired immediately, then was released and destroyed moments later.
- After patch: the "cherry" lease yields.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19080
Summary:
Depends on D19077. Ref T13073. When we're using slot locks to enforce a limit (e.g., maximum of 5 simultaneous things) we currently load locks owned by the blueprint to identify which slots are likely to be free.
However, this isn't right: the blueprint doesn't own these locks. The resources do.
We still get the right behavior eventually, but we incorrectly identify that every slot lock is always free, so as the slots fill up we'll tend to guess wrong more and more often.
Instead, load the slot locks by name explicitly.
Test Plan: Implemented lock-based limiting on `HoaxBlueprint`, `var_dump()`'d the candidate locks, saw correct test state for locks. Acquired leases without releasing, got all of the slots filled without any slot lock collisions (previously, the last slot or two tended to collide a lot).
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19078
Summary:
Depends on D19076. Ref T13073. Blueprints are stored as an attribute and `setAttributes()` overwrites all attributes.
This is sorta junk but make it less obviously broken, at least.
Test Plan: Ran `bin/drydock lease --type working-copy --attributes x=y` without instantly getting a fatal about "no blueprint PHIDs".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19077
Summary:
Depends on D19075. Ref T13073. If a lease acquires a resource but finds that the resource builds directly into a dead state (which can happen for any number of reasonable reasons), reset the lease and throw it back in the pool.
This isn't the lease's fault and it hasn't caused any side effects or done anything we can't undo, so we can safely reset it and throw it back in the pool.
Test Plan:
- Created a blueprint which throws from `allocateResource()` so that resources never activate.
- Tried to lease it with `bin/drydock lease ...`.
- Before patch: lease was broken and destroyed after a failed activation.
- After patch: lease was returned to the pool after a failed activation.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19076
Summary: Ref T13073. Depends on D19074. Update icons and UI for resource status.
Test Plan: Viewed resources in detail view and list view, saw better status icons.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19075
Summary:
Depends on D19073. Ref T13073. Give leases a normal header tag and try to wrangle their status constants a bit.
Also, try to capture the "status class" pattern a bit. Since we target PHP 5.2.3 we can't use `static::` so the actual subclass is kind of a mess. Not exactly sure if I want to stick with this or not. We could consider targeting PHP 5.3.0 instead to get `static::` / late static binding.
Test Plan: Viewed leases and lease lists, saw better and more conventional status information.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19074
Summary:
Depends on D19072. Ref T13073. Currently, you can leave leases stranded by using `^C` to interrupt the script. Handle signals and release leases on destruction if they haven't activated yet.
Also, print out more useful information before and after activation.
Test Plan: Mashed ^C while runnning `bin/drydock lease ... --trace`, saw the lease release.
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19073
Summary: Depends on D19071. Ref T13073. While the daemons are supposedly doing things, show the user any logs they generate. There's often something relevant but unearthing it can be involved.
Test Plan: {F5427773}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19072
Summary: Depends on D19070. Ref T13073. Some messages contain an interesting story or a clever anecdote. Respect newlines during rendering to preserve authorial intent.
Test Plan:
Viewed a message with linebreaks and could still read it.
{F5427754}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19071
Summary:
Ref T13073. When a Blueprint says it will be able to allocate a resource but then throws an exception while attempting that allocation, we currently fail the lease permanently.
This is excessively harsh. This blueprint may have the best of intentions and have encountered a legitimately unforseeable failure (like a `vm.new` call to build a VM failed) and be able to succeed in the future.
Even if this blueprint is a dirty liar, other blueprints (or existing resources) may be able to satisfy the lease in the future.
Even if every blueprint is implemented incorrectly, leaving the lease alive lets it converge to success after the blueprints are fixed.
Instead of failing, log the issue and yield.
(In the future, it might make sense to distinguish more narrowly between "actually, all the resources are used up" and all other failure types, since the former is likely more routine and less concerning.)
Test Plan:
- Wrote a broken `Hoax` blueprint which always claims it can allocate but never actually allocates (just `throw` in `allocateResource()`).
- Used `bin/phd drydock lease` to acquire a Hoax lease.
- Before patch: lease abruptly failed permanently.
- After patch: lease yields after allocation fails.
{F5427747}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19070
Summary:
Depends on D18848. Ref PHI243. This puts a bit of logic up front to figure out the blueprint type before we actually start editing it.
This implementation is a little messy but it keeps the API clean. Eventually, the implementation could probably go in the TransactionTypes so more code is shared, but I'd like to wait for a couple more of these first.
This capability probably isn't too useful, but just pays down a bit of technical debt from the caveat introduced in D18822.
Test Plan:
- Created a new blueprint with the API.
- Tried to create a blueprint without a "type" (got a helpful error).
- Created and edited blueprints via the web UI.
- Tried to change the "type" of an existing blueprint (got a helpful error).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18849
Summary: Ref PHI243. This is a followup to D18822, which added an edit-only `drydock.blueprint.edit`. By modularizing transactions (here) and then adding a "type" transaction (next change) I intend to remove the "edit-only" limitation and make this API method fully functional.
Test Plan: Created and edited blueprints via the web UI. Edited blueprints via the API. Disabled/enabled blueprints (currently web UI only).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18845
Summary:
Ref: https://admin.phacility.com/PHI243
Since our use case primarily focuses on transaction editing, this patch implements the `drydock.blueprint.edit` api method with the understanding that:
a) this is a work in progress
b) object editing is supported, but object creation is not yet implemented
Test Plan:
* updated existing blueprints via Conduit UI
* regression tested `maniphest.edit` by creating new and updating existing tasks
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, yelirekim, jcox
Differential Revision: https://secure.phabricator.com/D18822
Summary: Depends on D18734. See PHI176. We run this query on the main Drydock lease web UI, among other places. There is currently no `status` key which can satisfy it.
Test Plan:
Viewed Drydock lease page to get the query.
Ran ##explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;## before and after the change.
I don't have a ton of leases locally so the un-key'd EXPLAIN isn't //that// bad, but still shows that we're getting a better key. Before:
```
mysql> explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
| 1 | SIMPLE | drydock_lease | index | NULL | PRIMARY | 4 | NULL | 101 | Using where |
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
1 row in set (0.00 sec)
```
After:
```
mysql> explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
| 1 | SIMPLE | drydock_lease | range | key_status | key_status | 130 | NULL | 5 | Using index condition; Using filesort |
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18735
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary:
Ref T2543. These are currently numeric values, like "0" and "3". I want to replace them with strings, like "accepted", and move definitions from Arcanist to Phabricator.
To set the stage for this, reduce the number of callsites where Phabricator invokes `ArcanistDifferentialRevisionStatus`.
This is just the easy ones. I'll hold this until the release cut.
Test Plan:
- Called `differential.find`.
- Called `differential.getrevision`.
- Called `differential.query`.
- Removed all reviewers from a revision, saw warning.
- Abandoned the no-reviewers revision, no more warning.
- Attached a revision to a task to get it to show the state icon with the status on a tooltip.
- Viewed revision bucketing on dashboard.
- Used `bin/search index` to reindex a revision.
- Hit the "Land Revision" endpoint.
I didn't explicitly test these cases:
- Doorkeeper Asana integration, since setup takes a thousand years.
- Disambiguation logic when multiple hashes match, since setup is also very involved.
- Releeph because it's Releeph.
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18339
Summary:
This has been replaced by `PolicyCodex` after D16830. Also:
- Rebuild Celerity map to fix grumpy unit test.
- Fix one issue on the policy exception workflow to accommodate the new code.
Test Plan:
- `arc unit --everything`
- Viewed policy explanations.
- Viewed policy errors.
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D16831
Summary:
This search engine ports cleanly to Conduit out of the box.
Ref T11694
Test Plan: called the API method from the console, browsed blueprints in the ui
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T11694
Differential Revision: https://secure.phabricator.com/D16593
Summary:
`DrydockAuthorizationSearchEngine` was being used solely to display authorizations for a specific blueprint from the web UI and consequently expected that callers set a specific blueprint before performing a query. Here we check to see if a blueprint has been set in cases where the engine could be operating from either Conduit or the web.
Ref T11694
Test Plan:
- called the API method from the console
- approved an authorization
- followed the "view all" link from a blueprint page
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T11694
Differential Revision: https://secure.phabricator.com/D16592
Summary: Fixes T11501. Let's you pass in a full PHUIIconView or just the icon name to give ObjectListItem a large icon.
Test Plan: Alamanac, Applications, Drydock, Settings, Search Typeahead, Config page...
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11501
Differential Revision: https://secure.phabricator.com/D16421
Summary: Ref T10628. This moves everything else over. I'll clean up the cruft in the next diff.
Test Plan:
- Viewed Conduit API page, toggled tabs.
- Viewed Harbormaster build, toggled tabs.
- Viewed a Drydock lease, swapped tabs.
- Viewed a Drydock resource, swapped tabs.
- Viewed mail, swapped tabs.
- Grepped for `addPropertyList(...)`, looked for any remaining calls with a second argument.
- Also checked rSAAS for any calls, but we don't have anything there that uses tabs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16207
Summary:
Ref T11034. This seems a little more promising. Two problems at the moment:
- This doesn't actually provide any useful information at all right now.
- Many object types have no profile images.
Test Plan:
{F1695254}
{F1695255}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11034
Differential Revision: https://secure.phabricator.com/D16155
Summary:
Ref T10748. These:
- Look nice.
- Hint at panel contents / effects.
- Hint which panels have been customized.
- Allow panels with issues or errors to be highlighted with an alert/attention icon.
Test Plan: {F1256156}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15836
Summary: Updates Console and Operations page.
Test Plan: Pull up Console, pull up status page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15615
Summary: Cleans up EditEngine, adds new layout to EditEngine and descendents
Test Plan: Test creating a new form, reordering, marking and unmarking defaults. View new forms.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15531
Summary: Updates Drydock to use two column + curtain layouts.
Test Plan: Tested what I could get to, need @epriestley to run this locally for edge cases.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D15467
Summary:
Ref T10537. More infrastructure:
- Put a `bin/nuance` in place with `bin/nuance import`. This has no useful behavior yet.
- Allow sources to be searched by substring. This supports `bin/nuance import --source whatever` so you don't have to dig up PHIDs.
Test Plan:
- Applied migrations.
- Ran `bin/nuance import --source ...` (no meaningful effect, but works fine).
- Searched for sources by substring in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15436
Summary: Ref T10093. Changes must be pushed to staging before they can be landed from the web.
Test Plan:
Changes must be pushed to staging before they can be landed from the web.
{F1161909}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10093
Differential Revision: https://secure.phabricator.com/D15427
Summary: Ref T10093. Show better errors when a commit fails because it has already been merged and when a fetch fails because the ref isn't present in the remote.
Test Plan:
{F1160794}
{F1160795}
Reviewers: chad
Reviewed By: chad
Subscribers: michaeljs1990, yelirekim
Maniphest Tasks: T10093
Differential Revision: https://secure.phabricator.com/D15420
Summary:
Ref T10246. Drydock still has a few outstanding issues, but it's mostly minor UI stuff and the documentation has reasonable caveats about it.
Broadly, I don't expect to make any major changes to Drydock in the future (i.e., all the fundamentals seem sound at this point) and it doesn't have any major technical debt or, like, obsolete APIs or anything.
Test Plan: Saw "Drydock" as not-a-prototype in Applications.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10246
Differential Revision: https://secure.phabricator.com/D15401
Summary: Ref T10457. Use modern controller and UI tech to build the list view and actions.
Test Plan:
- Viewed operation list.
- Viewed operation detail.
- Checked menus on mobile.
{F1139757}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15393
Summary:
Ref T10457.
- Let blueprints be tagged so you can search and annotate them a little more easily.
- Give each blueprint type an optional icon to make things a little easier to parse visually.
Test Plan:
- Tagged blueprints.
- Searched by tags.
- Looked at nice little icons.
{F1139712}
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15392
Summary:
Ref T10457. Fixes T10024. This primarily just modernizes blueprints to use EditEngine.
This also fixes T10024, which was an issue with stored properties not being flagged correctly.
Also slightly improves typeaheads for blueprints (more information, disabled state).
Test Plan:
- Created and edited various types of blueprints.
- Set and removed limits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10024, T10457
Differential Revision: https://secure.phabricator.com/D15390
Summary:
Ref T10457. The ngram indexing seems to be working well; extend it into Drydock.
Also clean up the list controller a little bit.
Test Plan:
- Ran migrations.
- Searched for blueprints by name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15389
Summary:
Ref T10449. Currently, we store classes (like "AlmanacClusterRepositoryServiceType") in the database.
Instead, store types (like "cluster.repository").
This is a small change, but types are a little more flexible (they let us freely reanme classes), a little cleaner (fewer magic strings in the codebase), and a little better for API usage (they're more human readable).
Make this minor usability change now, before we unprototype.
Also make services searchable by type.
Also remove old Almanac API endpoints.
Test Plan:
- Ran migration, verified all data migrated properly.
- Created, edited, rebound, and changed properties of services.
- Searched for services by service type.
- Reviewed available Conduit methods.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10449
Differential Revision: https://secure.phabricator.com/D15346
Summary:
Fixes T9762. Ref T10246.
**Disabling Bindings**: Previously, there was no formal way to disable bindings. The internal callers sometimes check some informal property on the binding, but this is a common need and deserves first-class support in the UI. Allow bindings to be disabled.
**Deleting Interfaces**: Previously, you could not delete interfaces. Now, you can delete unused interfaces.
Also some minor cleanup and slightly less mysterious documentation.
Test Plan: Disabled bindings and deleted interfaces.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T9762, T10246
Differential Revision: https://secure.phabricator.com/D15345
Summary: Mostly for consistency, we're not using other forms of icons and this makes all classes that use an icon call it in the same way.
Test Plan: tested uiexamples, lots of other random pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15125
Summary:
Ref T9994.
- Allow errors to be dismissed.
- Tailor messaging for closed/abandoned revisions.
- Reduce scare messaging on land dialog, since it's not really that scary anymore.
Test Plan:
- Dismissed errors.
- Hit new warnings.
- Wasn't as scared when landing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9994
Differential Revision: https://secure.phabricator.com/D14886
Summary:
Fixes T10037. When we're building commit `aabbccdd`, we currently do this to check it out:
git reset --hard aabbccdd
However, this has an undesirable side effect of moving the current branch pointer to point at `aabbccdd`. The current branch pointer may be some totally different branch which `aabbccdd` is not part of, so this is confusing and misleading.
Instead, use `git reset --hard HEAD` to get the primary effect we want (destroying staged changes) and then `git checkout aabbccdd` to checkout the commit in a detached HEAD state.
Test Plan:
- Ran a build (a commit-focused operation) successfully.
- Verified working copy was pointed at a detached HEAD afterward:
```
builder@sbuild001:/var/drydock/workingcopy-167/repo/git-test-ii$ git status
HEAD detached at ffc7635
nothing to commit, working directory clean
```
- Ran a land (a branch-foused operation) successfully.
- Verified working copy was pointed at a branch afterward:
```
builder@sbuild001:/core/data/drydock/workingcopy-168/repo/git-test$ git status
On branch master
Your branch is up-to-date with 'origin/master'.
nothing to commit, working directory clean
```
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10037
Differential Revision: https://secure.phabricator.com/D14850
Summary:
Fixes T9994. Currently, when Drydock can't allocate a new resource because some limit has been reached, it waits patiently for a resource to become available.
It is possible that no resource will ever become available. Particularly with "Working Copy" resources, the new lease may want a copy of `rB`, but the resource may already be maxed out on `rA`.
Right now, no process exists to automatically reclaim the unused `rA`.
When we encounter this situation, try to reclaim one of the other resources if it is just sitting there unused.
Specifically:
- Add a "reclaim" command which means "release this resource //if// it is completely unused".
- Add a `bin/drydock reclaim` to send this command to every active resource.
- When we try to acquire a resource and can't, but only because of some kind of limit / utilization problem, try to release an unused resource to free up some room.
Test Plan:
- Set "Working Copy" resource limit to 1.
- Ran "Test Configuration" in `rA`, which worked.
- Ran "Test Configuration" in `rB`, which hung forever.
- Applied patch.
- Ran "Test Configuration" in `rB`, saw it reclaim the `rA` resource, use the slot, then succeed.
- Ran "Test Configuration" in `rA` again, saw it grab the slot back.
- Ran `bin/drydock reclaim` and saw it reclaim a bunch of old orphaned resources.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9994
Differential Revision: https://secure.phabricator.com/D14819
Summary:
Ref T9994. This fixes the first issue discussed on that task, which is that when a merge fails after "arc land", we would not clean up all the leases properly.
Specifically, when a merge fails, we use `queueTask()` to schedule a followup task. This followup destroys the lease and frees the underlying resource.
However, the default behavior of `queueTask()` is to //not queue tasks// if the parent task fails. This is a reasonable, safe behavior that was originally introduced in D8774, where it kept us from sending too much mail if a task did "send some mail" and then failed a little later on and got retried.
Since I think the default behavior is correct, I just special cased the behavior for Drydock to make it queue even on failure. These are the only types of followup tasks we currently want to queue on main task failure.
(It's possible that future Blueprints might want some kind of more specialized behavior, where some tasks queue only on success, but we can cross that bridge when we come to it.)
Test Plan:
- See T9994#149878 for test case setup.
- I ran that test case again with this patch, and saw the followup task queue properly in the `--trace` log, a correspoinding update task show up in `/daemon/`, and the lease get destroyed when I ran it a moment later.
{F1029915}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9994
Differential Revision: https://secure.phabricator.com/D14818
Summary:
Ref T10004. After D14804, we get this behavior by default and no longer need to set it explicitly.
(If some endpoint did eventually need to set it explicitly, it could just change what it passes to `setHref()`, but I believe we currently have no such endpoints and do not foresee ever having any.)
Test Plan:
- As a logged out user, clicked various links in Differential, Maniphest, Files, etc., always got redirected to a sensible place after login.
- Grepped for `setObjectURI()`, `getObjectURI()` (there are a few remaining callsites, but to a different method with the same name in Doorkeeper).
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14805
Summary:
Fixes T9669. Two issues:
- We were using `repositoryPHIDs` instead of `blueprintPHIDs` for the list of allowed blueprints. Use the correct value.
- We weren't enforcing `allowedBlueprintPHIDs` fully correctly. We //did// require an authorization, so the net effect was correct in nearly all cases, but we could have selected from too large a pool in the case where the application itself was doing the authorization (e.g., from the command line).
Test Plan: Ran a build through Drydock/Harbormaster locally.
Reviewers: chad, tycho.tatitscheff
Reviewed By: chad, tycho.tatitscheff
Subscribers: tycho.tatitscheff
Maniphest Tasks: T9669
Differential Revision: https://secure.phabricator.com/D14368
Summary: This is //hilarious//.
Test Plan: Test icon on local install.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14351
