Summary: ...and get the basic edit flow "working" for a new NuanceSourceDefinition - the Phabricator Form. ...and fix a dumb bug in the query class so when you redirect to the view page / try to edit an existing NuanceSource you don't fatal.
Test Plan: played around with the edit form and it worked!
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7585
Summary:
Ref T4122. Implements a credential management application for the uses described in T4122.
@chad, this needs an icon, HA HA HAHA HA BWW HA HA HA
bwahaha
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7608
Summary:
Ref T4110. This denormalized field used to power "Group By: Assigned" got dropped in the T2217 migration at some point.
Restore its population, and fix all the data in the database.
Test Plan: Ran migration, verified database came out reasonable-looking. Reassigned a task, verified database. Ran a "Group By: assigned" query.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4110
Differential Revision: https://secure.phabricator.com/D7602
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary:
Depends on D7519.
This implements support for build logs in Harbormaster. This includes support for appending to a log from the "Run Remote Command" build step.
It also adds the ability to cancel builds.
Currently the build view page doesn't update the logs live; I'm sure this can be achieved with Javelin, but I don't have enough experience with Javelin to actually make it poll from updates to content in the background.
{F79151}
{F79153}
{F79150}
{F79152}
Test Plan:
Tested this by setting up SSH on a Windows machine and using a Remote Command configured with:
```
C:\Windows\system32\cmd.exe /C cd C:\Build && mkdir Build_${timestamp} && cd Build_${timestamp} && git clone --recursive https://github.com/hach-que/Tychaia.git && cd Tychaia && Protobuild.exe && C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe Tychaia.Windows.sln
```
and observed the output of the build stream from the Windows machine into Phabricator.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7521
Summary:
I updated the wiki too - https://secure.phabricator.com/w/projects/pebkac/ - with what I am thinking right now. Rough plan here is
- next diff:
- implement editors and transactions
- implement "web type" for contact source
- /pebkac/item/new/ will be the entry point for this
- implement "actions" on a contact
- probably some "polish" on the scaffolding laid out here; like "create" permissions maybs
- diffs after that:
- implement "twitter" type for source
- implement email reply handler stuff for item and source
Probs a great time to blast huge holes in all this stuff. :D
Test Plan: these pages load and arc lint doesn't complain
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, chad
Differential Revision: https://secure.phabricator.com/D7465
Summary:
Ref T1049. Ref T2222. `DifferentialDiff` does not currently have a PHID, but we need it for Harbormaster and ApplicationTransactions. See some discussion in D7501.
(I split the SQL into two sections so we can't fail in the middle. At some point, I'd like to do a pass on the migration stuff and get this happening automatically, and also simplify the PatchList.)
Test Plan:
- Ran `bin/storage upgrade`.
- Checked for valid PHIDs in the database.
- Used `phid.query` to look up a diff by PHID.
- Created a new diff and verified it got a PHID.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran, vrana
Maniphest Tasks: T2222, T1049
Differential Revision: https://secure.phabricator.com/D7513
Summary:
Depends on D7498.
This implements support for a "build step implementation". Build steps have an associated class name (which makes the class in PHP) and a details field, which is serialized JSON (same as PhabricatorRepository).
This also implements a SleepBuildStepImplementation which just pauses the build for a specified period of seconds.
Test Plan:
Inserted a build step with `insert into harbormaster_buildstep (phid, buildPlanPHID, className, details, dateCreated, dateModified) values ('', 'PHID-HMCP-zkh5w6czfbfpk2gxwdeo', 'SleepBuildStepImplementation', '{"seconds":5}', NOW(), NOW());` (adjusting the build plan PHID as appropriate).
Started the daemon and applied the build plan to a buildable, and saw the daemon take a 5 second delay after creating `SleepBuildStepImplementation`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7499
Summary: Adds summary (description) and test plan icons to make these area's more unique and differentiated over general sections.
Test Plan: Test a diff, a commit, a task
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7493
Summary: This allows users to set their HTTP access passwords via Diffusion interface.
Test Plan: Clicked the "Set HTTP Access Password" link, set a password and saw it appear in the DB.
Reviewers: #blessed_reviewers, hach-que, btrahan
Reviewed By: hach-que
CC: Korvin, epriestley, aran, jamesr
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7462
Summary:
`RepositoryStatusMessage` is basically a key/value table associated with a repository that I'm using to let the daemons store the most recent event of a given type, so we can easily show it on the status dashboard. I think this will be a lot easier for users to figure out than digging through logfiles.
I'm also going to write the "this needs a pull" status here eventually, for reducing the time lapse between pushes and discovery.
- Add storage for these messages.
- Have the pull engine populate the INIT phase. I'll do the FETCH phase next.
- Update the status readout to show all the various states.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7461
Summary:
Fixes T3416. Fixes T1733.
- Adds a flag to the commit table showing whether or not we have parsed it.
- The flag is set to `0` initially when the commit is discovered.
- The flag is set to `1` when the changes are parsed.
- The UI can now use the flag to distinguish between "empty commit" and "commit which we haven't imported changes for yet".
- Simplify rendering code a little bit.
- Fix an issue with the Message parser for empty commits.
- There's a key on the flag so we can do `SELECT * FROM repository_commit WHERE repositoryID = %d AND importStatus = 0 LIMIT 1` soon, to determine if a repository is fully imported or not. This will let us improve the UI (Ref T776, Ref T3217).
Test Plan:
- Ran `bin/storage upgrade -f`.
- Created an empty commit.
- Without the daemons running, ran `bin/repository pull GTEST` and `bin/repository discover GTEST`.
- Viewed web UI to get the first screenshot ("Still Importing...").
- Ran the message and change steps with `scripts/repository/reparse.php`.
- Viewed web UI to get the second screenshot ("Empty Commit").
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T776, T1733, T3416, T3217
Differential Revision: https://secure.phabricator.com/D7428
Summary:
Fixes T2229. This sets the stage for a patch similar to D7417, but for SSH. In particular, SSH 6.2 introduced an `AuthorizedKeysCommand` directive, which lets us do this in a mostly-reasonable way without needing users to patch sshd (if they have a recent enough version, at least).
The way the `AuthorizedKeysCommand` works is that it gets run and produces an `authorized_keys`-style file fragment. This isn't ideal, because we have to dump every key into the result, but should be fine for most installs. The earlier patch against `sshd` passes the public key itself, which allows the script to just look up the key. We might use this eventually, since it can scale much better, so I haven't removed it.
Generally, auth is split into two scripts now which mostly do the same thing:
- `ssh-auth` is the AuthorizedKeysCommand auth, which takes nothing and dumps the whole keyfile.
- `ssh-auth-key` is the slightly cleaner and more scalable (but patch-dependent) version, which takes the public key and dumps only matching options.
I also reworked the argument parsing to be a bit more sane.
Test Plan:
This is somewhat-intentionally a bit obtuse since I don't really want anyone using it yet, but basically:
- Copy `phabricator-ssh-hook.sh` to somewhere like `/usr/libexec/openssh/`, chown it `root` and chmod it `500`.
- This script should probably also do a username check in the future.
- Create a copy of `sshd_config` and fix the paths/etc. Point the KeyScript at your copy of the hook.
- Start a copy of sshd (6.2 or newer) with `-f <your config file>` and maybe `-d -d -d` to foreground and debug.
- Run `ssh -p 2222 localhost` or similar.
Specifically, I did this setup and then ran a bunch of commands like:
- `ssh host` (denied, no command)
- `ssh host ls` (denied, not supported)
- `echo '{}' | ssh host conduit conduit.ping` (works)
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2229, T2230
Differential Revision: https://secure.phabricator.com/D7419
Summary: No editing or view yet, just adds the schema and a policy default. Part of D7391.
Test Plan: `bin/storage upgrade`
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7415
Summary: This adds a set of plain (blueish) icons for use instead of black.
Test Plan: Photoshop
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7434
Summary: This fixes the sprite for remarkup and does some minor tweaks for transactions (so Differential looks a little more like timeline)
Test Plan: tested remarkup, differential
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7418
Summary: Makes a white hover icon show on the policy dropdown. Also fixed some spacing. Fixes T4017
Test Plan: hover over the policy dropdown
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4017
Differential Revision: https://secure.phabricator.com/D7388
Summary:
Ref T1049. I don't really want to sink too much time into this right now, but a seemingly reasonable architecture came to me in a dream. Here's a high-level overview of how things fit together:
- **"Build"**: In Harbormaster, "build" means any process we want to run against a working copy. It might actually be building an executable, but it might also be running lint, running unit tests, generating documentation, generating symbols, running a deploy, setting up a sandcastle, etc.
- `HarbormasterBuildable`: A "buildable" is some piece of code which build operations can run on. Generally, this is either a Differential diff or a Diffusion commit. The Buildable class just wraps those objects and provides a layer of abstraction. Currently, you can manually create a buildable from a commit. In the future, this will be done automatically.
- `HarbormasterBuildStep`: A "build step" is an individual build operation, like "run lint", "run unit", "build docs", etc. The step defines how to perform the operation (for example, "run unit tests by executing 'arc unit'"). In this diff, this barely exists.
- `HarbormasterBuildPlan`: This glues together build steps into groups or sequences. For example, you might want to "run unit", and then "deploy" if the tests pass. You can create a build plan which says "run step "unit tests", then run step "deploy" on success" or whatever. In the future, these will also contain triggers/conditions ("Automatically run this build plan against every commit") and probably be able to define failure actions ("If this plan fails, send someone an email"). Because build plans will run commands, only administrators can manage them.
- `HarbormasterBuild`: This is the concrete result of running a `BuildPlan` against a `Buildable`. It tracks the build status and collects results, so you can see if the build is running/successful/failed. A `Buildable` may have several `Build`s, because you can execute more than one `BuildPlan` against it. For example, you might have a "documentation" build plan which you run continuously against HEAD, but a "unit" build plan which you want to run against every commit.
- `HarbormasterBuildTarget`: This is the concrete result of running a `BuildStep` against a `Buildable`. These are children of `Build`. A step might be able to produce multiple targets, but generally this is something like "Unit Tests" or "Lint" and has an overall status, so you can see at a glance that unit tests were fine but lint had some issues.
- `HarbormasterBuildItem`: An optional subitem for a target. For lint, this might be an individual file. For unit tests, an individual test. For normal builds, an executable. For deploys, a server. For documentation generation, there might just not be subitems.
- `HarbormasterBuildLog`: Provides extra information, like command/execution transcripts. This is where stdout/stderr will get dumped, and general details and other messages.
- `HarbormasterBuildArtifact`: Stores side effects or results from build steps. For example, something which builds a binary might put the binary in "Files" and then put its PHID here. Unit tests might put coverage information here. Generally, any build step which produces some high-level output object can use this table to record its existence.
This diff implements almost nothing and does nothing useful, but puts most of these object relationships in place. The two major things you can't easily do with these objects are:
1) Run arbitrary cron jobs. Jenkins does this, but it feels tacked on and I don't know of anyone using it for that. We could create fake Buildables to get a similar effect, but if we need to do this I'd rather do it elsewhere in general. Build and cron/service/monitoring feel like pretty different problems to me.
2) Run parameterized/matrix steps (maybe?). Bamboo has this plan/stage/task/job breakdown where a build step can generate a zillion actual jobs, like "build client on x86", "build server on x86", "build client on ARM", "build server on ARM", etc. We can sort of do this by having a Step map to multiple Targets, but I haven't really thought about it too much and it may end up being not-great. I'd guess we have like an 80% chance of getting a clean implementation if/when we get there. I suspect no one actually needs this, or when they do they'll just implement a custom Step and it can be parameterized at that level. I'm not too worried about this overall.
The major difference between this and Jenkins/Bamboo/TravisCI is that all three of those are **plan-centric**: the primary object in the system is a build plan, and the dashboard shows you all your build plans and the current status. I don't think this is the right model. One disadvantage is that you basically end up with top-level messaging that says "Trunk is broken", not "Trunk was broken by commit af32f392f". Harbormaster is **buildable-centric**: the primary object in the system is stuff you can run build operations against (commits/branches/revisions), and actual build plans are secondary. The main view will be "recent commits on this branch, and whether they're good or not" -- which I think is what's most important in a larger/more complex product -- not the pass/fail status of all jobs. This also makes it easier and more natural to integrate with Differential and Diffusion, which both care about the overall status of the commit/revision, not the current status of jobs.
Test Plan: Poked around, but this doesn't really do anything yet.
Reviewers: btrahan
Reviewed By: btrahan
CC: zeeg, chad, aran, seporaitis
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7368
Summary:
Ref T4010. Projects have a weird proto-version of ApplicationTransactions which is very similar but not quite the same.
Move the storage to a modern format, but keep all the other code for now.
Test Plan: Migrated project transactions; edited projects.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7370
Summary:
Ref T1344. This is //very// rough. Some UI issues:
- Empty states for the board and columns are junky.
- Column widths are crazy. I think we need to set them to fixed-width, since we may have an arbitrarily large number of columns?
- I don't think we have the header UI elements in M10 yet and that mock is pretty old, so I sort of very roughly approximated it.
- What should we do when you click a task title? Popping the whole task in a dialog is possible but needs a bunch of work to actually work. Might need to build "sheets" or something.
- Icons are slightly clipped for some reason.
- All the backend stuff is totally faked.
Generally, my plan is just to use these to implement all of T390. Specifically:
- "Kanban" projects will have "Backlog" on the left. You'll drag them toward the right as you make progress.
- "Milestone" projects will have "No Milestone" on the left, then "Milestone 9", "Milestone 8", etc.
- "Sprint" projects will have "Backlog" on the left, then "Sprint 31", "Sprint 30", etc.
So all of these things end up being pretty much exactly the same, with some minor text changes and new columns showing up on the left vs the right or whatever.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran, sascha-egerer
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7374
Summary: Ref T4010. Adds storage and indexes for custom fields. These tables are the same as people/maniphest/differential.
Test Plan: Ran `bin/storage upgrade`.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7369
Summary:
Ref T2222. This implements step (1) described there, which is moving over all the inline comments.
The old and new tables are simliar. The only real trick here is that `transactionPHID` and `legacyCommentID` mean roughly the same thing (`null` if the inline is a draft, non-null if it has been submitted) but we don't have real `transactionPHID`s yet. We just make some up -- we'll backfill them later.
Two risks here:
- I need to take a second look at the keys on this table. I think we need to tweak them a bit, and it will be less disruptive to do that before this migration than after.
- This will take a while for Facebook, and other large installs with tens of thousands of revisions. I'll communicate this.
I'm otherwise pretty satisfied with this, seems to work well and is pretty low risk / non-disruptive.
Test Plan:
- Before migrating, then after migrating:
- Made a bunch of inlines (drafts, submitted).
- Edited and deleted inlines.
- Verified inlines showed up in preview.
- Verified that inlines aren't indexed when they're drafts (`bin/search index D935`).
- Verified that inlines ARE indexed when they're not drafts.
- Verified that drafts inlines make revisions appear as "with draft" in the revision list.
- Made left, right, and draft inlines.
- Migrated (`bin/storage upgrade`).
- Verified that my inlines from before the migration still showed up.
- (Repeated all the stuff above.)
- Manually inspected the inline comment table.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D7139
Summary: This data was migrated by D6977 and is now obsolete. I'll hold this patch for a week or two in case we get reports of migration errors.
Test Plan: Ran storage upgrade, saw the table vanish. Grepped for references to the table.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6997
Summary: Believe it or not, I forgot how to create a link in Remarkup.
Test Plan: Clicked on it with selected URL, selected text and without a selection.
Reviewers: chad, epriestley
Reviewed By: epriestley
CC: epriestley, aran, chad
Differential Revision: https://secure.phabricator.com/D7336
Summary: Makes it easy to choose distinctive icons for projects.
Test Plan:
{F71018}
{F71020}
{F71019}
{F71021}
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7333
Summary: Ref T603. Give countdowns proper UI-level policy controls, and an application-level default policy. Put policy information in the header.
Test Plan:
- Adjusted default policy.
- Created new countdowns.
- Edited countdowns.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7322
Summary: Adds filetype icons, applying to differential file headers. The main issue is with all the lightening, I wanted something to still anchor 'new file' on the page and adding a sharp icons does that pretty well for me. Feedback is cool too.
Test Plan: Add some new icons, test in previous commits.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7320
Summary: A set of random icons for use as project identifiers. 42, white.
Test Plan: photoshop, epriestley
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7290
Summary: There are reversed on retina displays/
Test Plan: Review on retina Mac
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7257
Summary:
Ref T603. Ref T1279. Further improves transaction and policy support for Herald.
- Instead of deleting rules (which wipes out history and can't be undone) allow them to be disabled.
- Track disables with transactions.
- Gate disables with policy controls.
- Show policy and status information in the headers.
- Show transaction history on rule detail screens.
- Remove the delete controller.
- Support disabled queries in the ApplicationSearch.
Test Plan:
- Enabled and disabled rules.
- Searched for enabled/disabled rules.
- Verified disabled rules don't activate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279, T603
Differential Revision: https://secure.phabricator.com/D7247
Summary:
Ref T1279. @champo did a lot of this work already; we've been doing double writes for a long time.
Add "double reads" (reading the edge table as both the "relationship" table and as the "reviewer status" table), and migrate all the data.
I'm not bothering to try to recover old reviewer status (e.g., we could infer from transactions who accepted old revisions) because it wold be very complicated and doesn't seem too valuable.
Test Plan:
- Without doing the migration, used Differential. Verified that reads and writes worked. Most of the data was there anyway since we've been double-writing.
- Performed the migration. Verified that everything was still unchanged.
- Dropped the edge table, verified all reviweer data vanished.
- Migrated again, verified the reviewer stuff was restored.
- Did various cc/reviewer/subscriber queries, got consistent results.
Reviewers: btrahan
Reviewed By: btrahan
CC: champo, aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7227
Summary:
Ref T1279. This came to me in a dream.
The existing `differential_relationship` table has an `(objectPHID, type)` column, which theoretically is useful for queries like "revisions with X as a reviewer". In practice, I'm not sure it gets used much, but I can get it to show up in at least some query plans.
Add a similar index to the `edge` table. This sequences //before// D7227, which actually migrates the data.
Test Plan:
- Ran `bin/storage upgrade`.
- EXPLAIN'd a bunch of queries against different versions of the schema, this seemed helpful overall.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7232
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary:
Ref T603. Principally, I want to implement the rule "when you upload a file to an object, users must be able to see the object in order to see the file", since I think this is strongly in line with user expectation. For example, if you attach a file to a Conpherence, it should only be visible to members of that thread.
This adds storage for policies, but doesn't do anything interesting with it yet.
Test Plan: Ran `bin/storage upgrade`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7175
Summary: Fixes 2x white icons, adds 'user' and 'project' icons.
Test Plan: tested new states in Maniphest
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7176
Summary: This adds the 'PHUIObjectBox' to nearly every place that should get it. I need to comb through Diffusion a little more. I've left Differential mostly alone, but may decide to do it anyways this weekend. I'm sure I missed something else, but these are easy enough to update.
Test Plan: tested each new layout.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7162
Summary: Ref T3887. Implements storage and editors, but not the actual audio part.
Test Plan: Edited audio, audio behaviors of macros. Transactions and email looked good. Hit error cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3887
Differential Revision: https://secure.phabricator.com/D7159
Summary:
Ref T2222. This sequences //before// D7139 and sorts out keys on the table. In particular:
- There was a fairly silly `draft` key modeled after Pholio; drop it.
- Add a `revisionPHID` key. This is queried mostly-transitionally on the revision view screen.
- Add a `changesetID` key. This is queried by a bunch of interfaces that want more surgical results than `revisionPHID` provides.
- Add an `authorPHID, transactionPHID` key. This is queried on the list interface to find pending drafts.
- Add a `legacy` key. This is queried by the feed publisher.
Test Plan: Used the query analyzer to hit all (I think?) of the pages, saw keyed queries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D7140
Summary: Ref T603. Paves the way for policy controls.
Test Plan: Ran storage upgrade, bumbled around in Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7133
Summary: Removed shadow from white icons, made some new ones for maniphest, cleaned up a few old ones.
Test Plan: uiexamples, photoshop
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7106
Summary:
Ref T2217. Fixes T3876. We incorrectly have a unique key on `(authorPHID, transactionPHID)`, which prevents saving multiple versions of a comment.
I'm not entirely sure why this exists. I think it came from Pholio (where it works for inlines, because it has an additional component, but maybe should be adjusted) but we might need to wipe it out of more apps too.
Test Plan: Edited a comment in Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217, T3876
Differential Revision: https://secure.phabricator.com/D7102
Summary: Ref T2217. Cleans up the table names. Moves old data to `maniphest_transaction_legacy`. We'll drop that eventually once it's more clear that I didn't break the world.
Test Plan: Did reads/writes to/from these tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7094
Summary: Ref T2217. Pro is the new standard.
Test Plan: Lots of `grep`, made a pile of Maniphest views/edits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7093
Summary: Adds status icons and colors to Maniphest and Differential. Also minor tweaks to them in hovercards. Probably some other stuff too.
Test Plan: Test many diff and task states.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7098
Summary:
Ref T2217. This is the risky, hard part; everything after this should be smooth sailing. This is //mostly// clean, except:
- The old format would opportunistically combine a comment with some other transaction type if it could. We no longer do that, so:
- When migrating, "edit" + "comment" transactions need to be split in two.
- When editing now, we should no longer combine these transaction types.
- These changes are pretty straightforward and low-impact.
- This migration promotes "auxiliary field" data to the new CustomField/StandardField format, so that's not a straight migration either. The formats are very similar, though.
Broadly, this takes the same attack that the auth migration did: proxy all the code through to the new storage. `ManiphestTransaction` is now just an API on top of `ManiphestTransactionPro`, which is the new storage format. The two formats are very similar, so this was mostly a straight copy from one table to the other.
Test Plan:
- Without performing the migration, made a bunch of edits and comments on tasks and verified the new code works correctly.
- Droped the test data and performed the migration.
- Looked at the resulting data for obvious discrepancies.
- Looked at a bunch of tasks and their transaction history.
- Used Conduit to pull transaction data.
- Edited task description and clicked "View Details" on transaction.
- Used batch editor.
- Made a bunch more edits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7068
Summary: Ref T2217. Add the tables and comment class for the new stuff. Not used yet.
Test Plan: Ran storage upgrade, browsed Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7066
Summary:
- Add some TODO'd keys.
- Add policy fields.
Test Plan: Viewed repositories; created a new repository and verified it got the right default policy settings.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7056
Summary: Ref T3794. Drop auxiliary field, use standard field.
Test Plan: Performed migration, field seemed to survive it intact. Edited and viewed tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3794
Differential Revision: https://secure.phabricator.com/D7036
Summary: The adds the ability to set 'properties' such as state, privacy, due date to the header of objects.
Test Plan: Implemented in Paste, Pholio. Tested various states.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7016
Summary: Ref T418. Moves data from the Maniphest-specific table to the general one. This patch is a bit gross, but mostly about getting the reads and writes aimed correctly. Future patches will clean things up.
Test Plan: Migrated data across formats. Verified it survied the migration. Viewed and edited tasks' custom fields.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D6999
Summary: Ref T418. Depends on D6992. This adds index and value storage for Maniphest custom fields.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D6995
Summary:
Ref T2625. Ref T3794. Ref T418. Ref T1703.
This is a more general version of D5278. It expands CustomField support to include real integration with ApplicationSearch.
Broadly, custom fields may elect to:
- build indicies when objects are updated;
- populate ApplicationSearch forms with new controls;
- read inputs entered into those controls out of the request; and
- apply constraints to search queries.
Some utility/helper stuff is provided to make this easier. This part could be cleaner, but seems reasonable for a first cut. In particular, the Query and SearchEngine must manually call all the hooks right now instead of everything happening magically. I think that's fine for the moment; they're pretty easy to get right.
Test Plan:
I added a new searchable "Company" field to People:
{F58229}
This also cleaned up the disable/reorder view a little bit:
{F58230}
As it did before, this field appears on the edit screen:
{F58231}
However, because it has `search`, it also appears on the search screen:
{F58232}
When queried, it returns the expected results:
{F58233}
And the actually good bit of all this is that the query can take advantage of indexes:
mysql> explain SELECT * FROM `user` user JOIN `user_customfieldstringindex` `appsearch_0` ON `appsearch_0`.objectPHID = user.phid AND `appsearch_0`.indexKey = 'mk3Ndy476ge6' AND `appsearch_0`.indexValue IN ('phacility') ORDER BY user.id DESC LIMIT 101;
+----+-------------+-------------+--------+-------------------+----------+---------+------------------------------------------+------+----------------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------------+--------+-------------------+----------+---------+------------------------------------------+------+----------------------------------------------+
| 1 | SIMPLE | appsearch_0 | ref | key_join,key_find | key_find | 232 | const,const | 1 | Using where; Using temporary; Using filesort |
| 1 | SIMPLE | user | eq_ref | phid | phid | 194 | phabricator2_user.appsearch_0.objectPHID | 1 | |
+----+-------------+-------------+--------+-------------------+----------+---------+------------------------------------------+------+----------------------------------------------+
2 rows in set (0.00 sec)
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418, T1703, T2625, T3794
Differential Revision: https://secure.phabricator.com/D6992
Summary: Ref T2625. EVERYONE LOVES MIGRATIONS!!!
Test Plan:
- Created and migrated a query with every field, verified results were preserved.
- Created and migrated a query using "noproject" and "upforgrabs" magic, verified results were preserved.
Here's the pre-migration "everything" query:
{F58110}
Here it is after migration:
{F58111}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D6977
Summary: See discussion in D6955. This provides a table we can JOIN against to (effectively) "ORDER BY project name", populates it intially, and keeps it up to date as projects are edited.
Test Plan:
- Ran storage upgrade, verified projects populated into the table.
- Edited a project, verified its entry updated.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6957
Summary: Depends on D6952. Unpunts there since I'm rolling into a swamp full of schema changes.
Test Plan: Issued date-constrained query and saw key as a candidate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6954
Summary: Noticed this in the schema. "Touches" were an idea that never really got off the ground, as we built out more/better notification channels instead. Essentially, they recorded any object you'd ever interacted with. Maybe this will be useful some day, but for now it does nothing and can't be interacted with. Nuke it.
Test Plan: `grep`, loaded Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6953
Summary:
Fixes T3803. Turns out my advice was sort of terrible. :/
In strict mode, the `INSERT INTO x (y, z)` raises an error unless `(y, z, ...)` includes //all// columns without default values.
Test Plan: Ran `storage upgrade` on a strict-mode install. Verified no inserts were performed.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3803
Differential Revision: https://secure.phabricator.com/D6894
Summary: this ends up being a little weird since you can't actually edit files. Also, since we create files all sorts of ways, sometimes without even having a user, we don't bother logging transactions for those events. Fixes T3651. Turns out this work is important for T3612, which is a priority of mine to help get Pholio out the door.
Test Plan: left a comment on a file. it worked! use bin/mail to verify mail content looked correct.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran, wez
Maniphest Tasks: T3651, T3612
Differential Revision: https://secure.phabricator.com/D6789
Summary:
Fixes T3782. Two changes:
- Remove the "Chaos" mode, which wasn't as funny as I'd hoped and has had a good run.
- Fix "Order" (now "Fullscreen") mode in Conpherence. Best fix I could come up with is dropping the "position: fixed" on all parents while in the mode.
Test Plan: Used Fullscreen mode in Conpherence in Chrome.
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3782
Differential Revision: https://secure.phabricator.com/D6844
Summary:
Ref T988. This brings the class/interface atomizer over. A lot of parts of this are still varying degrees of very-rough, but most of the data ends up in approximatley the right place.
ALSO: PROGRESS BARS
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T988
Differential Revision: https://secure.phabricator.com/D6817
Summary:
This attempts some consistency in form layouts. Notably, they all now contain headers and are 16px off the sides and tops of pages. Also updated dialogs to the same look and feel. I think I got 98% of forms with this pass, but it's likely I missed some buried somewhere.
TODO: will take another pass as consolidating these colors and new gradients in another diff.
Test Plan: Played in my sandbox all week. Please play with it too and let me know how they feel.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6806
Summary: Ref T3663. Does what it says on the tin.
Test Plan: Ran `storage upgrade`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3663
Differential Revision: https://secure.phabricator.com/D6778
Summary: Ref T3663. This is obsolete code which is used only in this migration, which Facebook has already performed and which isn't relevant for any other installs.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3663
Differential Revision: https://secure.phabricator.com/D6777
Summary:
Ref T1702. Ref T3718. There are a couple of things going on here:
**PhabricatorCustomFieldList**: I added `PhabricatorCustomFieldList`, which is just a convenience class for dealing with lists of fields. Often, current field code does something like this inline in a Controller:
foreach ($fields as $field) {
// do some junk
}
Often, that junk has some slightly subtle implications. Move all of it to `$list->doSomeJunk()` methods (like `appendFieldsToForm()`, `loadFieldsFromStorage()`) to reduce code duplication and prevent errors. This additionally moves an existing list-convenience method there, out of `PhabricatorPropertyListView`.
**PhabricatorUserConfiguredCustomFieldStorage**: Adds `PhabricatorUserConfiguredCustomFieldStorage` for storing custom field data (like "ICQ Handle", "Phone Number", "Desk", "Favorite Flower", etc).
**Configuration-Driven Custom Fields**: Previously, I was thinking about doing these with interfaces, but as I thought about it more I started to dislike that approach. Instead, I built proxies into `PhabricatorCustomField`. Basically, this means that fields (like a custom, configuration-driven "Favorite Flower" field) can just use some other Field to actually provide their implementation (like a "standard" field which knows how to render text areas). The previous approach would have involed subclasssing the "standard" field and implementing an interface, but that would mean that every application would have at least two "base" fields and generally just seemed bleh as I worked through it.
The cost of this approach is that we need a bunch of `proxy` junk in the base class, but that's a one-time cost and I think it simplifies all the implementations and makes them a lot less magical (e.g., all of the custom fields now extend the right base field classes).
**Fixed Some Bugs**: Some of this code hadn't really been run yet and had minor bugs.
Test Plan:
{F54240}
{F54241}
{F54242}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1702, T1703, T3718
Differential Revision: https://secure.phabricator.com/D6749
Summary: Ref T3656. Releeph denormalizes branch cut point identifiers into Branch objects, but this information isn't useful or used for sorting, filtering, or enforcing unique constraints. Instead, derive it via noramlized pathways from the `cutPointCommitPHID`.
Test Plan: Ran storage upgrade. Ran `releephwork.getbranch` and `releeph.getbranches`. Grepped for `cutPointCommitIdentifier`.
Reviewers: btrahan
Reviewed By: btrahan
CC: LegNeato, aran
Maniphest Tasks: T3656
Differential Revision: https://secure.phabricator.com/D6636
Summary:
Fixes T3660. Releeph Projects currently have an unused one-to-one mapping to Phabricator projects. This isn't consistent with other applications and has no integrations or uses. Get rid of it.
NOTE: Waiting for signoff from @legneato on T3660 before pulling the trigger here.
Test Plan: Created and edited Releeph projects. Grepped for references to project ID; there are a dozen or so but they're all either Releeph projects or Arcanist projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: LegNeato, aran
Maniphest Tasks: T3660
Differential Revision: https://secure.phabricator.com/D6635
Summary: Ref T3655. Depends on D6633. This removes the writes and the column.
Test Plan: Created a project, edited a project. Verified the table doesn't have any keys including this column.
Reviewers: btrahan
Reviewed By: btrahan
CC: LegNeato, aran
Maniphest Tasks: T3655
Differential Revision: https://secure.phabricator.com/D6634
Summary: Ref T2769. I'm planning to keep this pretty simple, but we have this ad-hoc edit log for rules already and some other mess that we can clean up.
Test Plan: No effect yet; see future changes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2769
Differential Revision: https://secure.phabricator.com/D6654
Summary: Email replies and subscribers seem to go hand in hand so deploy both at once.
Test Plan: played around with bin/mail. Verified replies posted comments on the paste.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3650
Differential Revision: https://secure.phabricator.com/D6682
This column has no default value and throws if you have maximum warnings activated:
EXCEPTION: (AphrontQueryException) #1364: Field 'commentVersion' doesn't have a default value...
Auditors: btrahan
Summary: Ref T3650. This adds a create transaction, transactions for metadata (title, langauge, view policy), and comments. Editor is used on all create /edit paths.
Test Plan: made some pastes via web and email - yay. edited pastes - yay. verified txns showed up on pastes and in feed correctly.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3516, T3650
Differential Revision: https://secure.phabricator.com/D6645
Summary: Ref T3578. I forget if this was an explicit decision or not, but we currently let the same user answer questions multiple times. I think this probably causes more confusion than it provides freedom. In conjunction with other UI issues (commenting being weird, notably), we're seeing some use of answers to comment, which is undesirable. Require each answer's author to be unique. Merge existing nonunique authors' answers.
Test Plan: {F52062}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3578
Differential Revision: https://secure.phabricator.com/D6605
Summary: Let's see how these do, seems ok
Test Plan: Microsoft Paint
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6615
Summary:
Fixes T3579
As a basic overview, this enables the author of a question to open/close a question.
Other bits;
- Add "Open" filter to the builtin queries
- Add "Status" to search form
- Refactor ponder constants
- Add coloured bars for different question statuses
Test Plan:
- Open/Close questions
- Search for some bits
- Use filters
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3579
Differential Revision: https://secure.phabricator.com/D6590
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary: Like other icons, except white (hover states).
Test Plan: photoshop
Reviewers: epriestley, btrahan
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6591
Summary:
Now you can actually replace an image! Ref T3572. This ended up needing a wee bit of infrastructure to work...
- add replace image transaction to pholio
- add replacesImagePHID to PholioImage
- tweaks to editor to properly update images with respect to replacement
- add edges to track replacement
- expose getNodes on graph query infrastructure to query the entire graph of who replaced who
- move pholio image to new phid infrastructure
Still TODO - the history view should get chopped out a bit from the current view - no more inline comments / generally less functionality plus maybe a tweak or two to make this more sensical.
Test Plan: replaced images and played with history controller a little. works okay.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3572
Differential Revision: https://secure.phabricator.com/D6560
Summary: Fixes T3557. One thing which made T3557 kind of a mess was the lack of information about progress through temporary failures. Add a column which records a task's last failure time, and surface it in the console.
Test Plan: {F51277}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3557
Differential Revision: https://secure.phabricator.com/D6550
