Summary:
Ref T13164. See PHI788. The issue requests a "created" timestamp.
Also add filtering for repository, state, and author.
Test Plan:
Used all filters.
{F5795085}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19574
Summary:
`DrydockAuthorizationSearchEngine` was being used solely to display authorizations for a specific blueprint from the web UI and consequently expected that callers set a specific blueprint before performing a query. Here we check to see if a blueprint has been set in cases where the engine could be operating from either Conduit or the web.
Ref T11694
Test Plan:
- called the API method from the console
- approved an authorization
- followed the "view all" link from a blueprint page
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T11694
Differential Revision: https://secure.phabricator.com/D16592
Summary:
Ref T10748. These:
- Look nice.
- Hint at panel contents / effects.
- Hint which panels have been customized.
- Allow panels with issues or errors to be highlighted with an alert/attention icon.
Test Plan: {F1256156}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15836
Summary: Ref T10457. Use modern controller and UI tech to build the list view and actions.
Test Plan:
- Viewed operation list.
- Viewed operation detail.
- Checked menus on mobile.
{F1139757}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15393
Summary:
Ref T10457.
- Let blueprints be tagged so you can search and annotate them a little more easily.
- Give each blueprint type an optional icon to make things a little easier to parse visually.
Test Plan:
- Tagged blueprints.
- Searched by tags.
- Looked at nice little icons.
{F1139712}
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15392
Summary:
Ref T10457. The ngram indexing seems to be working well; extend it into Drydock.
Also clean up the list controller a little bit.
Test Plan:
- Ran migrations.
- Searched for blueprints by name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15389
Summary:
Ref T9994.
- Allow errors to be dismissed.
- Tailor messaging for closed/abandoned revisions.
- Reduce scare messaging on land dialog, since it's not really that scary anymore.
Test Plan:
- Dismissed errors.
- Hit new warnings.
- Wasn't as scared when landing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9994
Differential Revision: https://secure.phabricator.com/D14886
Summary:
Ref T182.
- We just show the oldest operation right now, but we usually care about the oldest non-failure.
- Only query for actual land operations when rendering the revision operations dialog (maybe eventually we'll show more stuff?).
- For now, prevent multiple lands / repeated lands or queueing up lands while other lands are happening.
Test Plan: Landed a revision. Tried to land it more / again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14338
Summary: Ref T182. Nothing fancy, just make these slightly easier to work with.
Test Plan: {F884754}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14295
Summary:
Ref T182. If 35 other things are configured completely correctly, make it remotely possible that this button may do something approximating the thing that the user wanted.
This primarily fleshes out the idea that "operations" (like landing, merging or cherry-picking) can have some beahavior, and when we run an operation we do whatever that behavior is instead of just running `git show`.
Broadly, this isn't too terrible because Drydock seems like it actually works properly for the most part (???!?!).
Test Plan: {F876431}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14270
Summary:
Ref T182. This doesn't do anything interesting yet and is mostly scaffolding, but here's roughly the workflow. From previous revision, you can configure "Repository Automation" for a repository:
{F875741}
If it's configured, a new "Land Revision" button shows up:
{F875743}
Once you click it you get a big warning dialog that it won't work, and then this shows up at the top of the revision (completely temporary/placeholder UI, some day a nice progress bar or whatever):
{F875747}
If you're lucky, the operation eventually sort of works:
{F875750}
It only runs `git show` right now, doesn't actually do any writes or anything.
Test Plan:
- Clicked "Land Revision".
- Watched `phd debug task`.
- Saw it log `git show` to output.
- Verified operation success in UI (by fiddling URL, no way to get there normally yet).
Reviewers: chad
Reviewed By: chad
Subscribers: revi
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14266
Summary:
Ref T9519. When acquiring leases on resources:
- Only consider resources created by authorized blueprints.
- Only consider authorized blueprints when creating new resources.
- Fail with a tailored error if no blueprints are allowed.
- Fail with a tailored error if missing authorizations are causing acquisition failure.
One somewhat-substantial issue with this is that it's pretty hard to figure out from the Harbormaster side. Specifically, the Build step UI does not show field value anywhere, so the presence of unapproved blueprints is not communicated. This is much more clear in Drydock. I'll plan to address this in future changes to Harbormaster, since there are other related/similar issues anyway.
Test Plan: {F872527}
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14254
Summary:
Ref T9519. This is like 80% of the way there and doesn't fully work yet, but roughly shows the shape of things to come. Here's how it works:
First, there's a new custom field type for blueprints which works like a normal typeahead but has some extra logic. It's implemented this way to make it easy to add to Blueprints in Drydock and Build Plans in Harbormaster. Here, I've added a "Use Blueprints" field to the "WorkingCopy" blueprint, so you can control which hosts the working copies are permitted to allocate on:
{F869865}
This control has a bit of custom rendering logic. Instead of rendering a normal list of PHIDs, it renders an annotated list with icons:
{F869866}
These icons show whether the blueprint on the other size of the authorization has approved this object. Once you have a green checkmark, you're good to go.
On the blueprint side, things look like this:
{F869867}
This table shows all the objects which have asked for access to this blueprint. In this case it's showing that one object is approved to use the blueprint since I already approved it, but by default new requests come in here as "Authorization Requested" and someone has to go approve them.
You approve them from within the authorization detail screen:
{F869868}
You can use the "Approve" or "Decline" buttons to allow or prevent use of the blueprint.
This doesn't actually do anything yet -- objects don't need to be authorized in order to use blueprints quite yet. That will come in the next diff, I just wanted to get the UI in reasonable shape first.
The authorization also has a second piece of state, which is whether the request from the object is active or inactive. We use this to keep track of the authorization if the blueprint is (maybe temporarily) deleted.
For example, you might have a Build Plan that uses Blueprints A and B. For a couple days, you only want to use A, so you remove B from the "Use Blueprints: ..." field. Later, you can add B back and it will connect to its old authorization again, so you don't need to go re-approve things (and if you're declined, you stay declined instead of being able to request authorization over and over again). This should make working with authorizations a little easier and less labor intensive.
Stuff not in this diff:
- Actually preventing any allocations (next diff).
- Probably should have transactions for approve/decline, at least, at some point, so there's a log of who did approvals and when.
- Maybe should have a more clear/loud error state when no blueprints are approved?
- Should probably restrict the typeahead to specific blueprint types.
Test Plan:
- Added the field.
- Typed some stuff into it.
- Saw the UI update properly.
- Approved an authorization.
- Declined an authorization.
- Saw active authorizations on a blueprint page.
- Didn't see any inactive authroizations there.
- Clicked "View All Authorizations", saw all authorizations.
Reviewers: chad, hach-que
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14251
Summary:
Ref T9252. Several general changes here:
- Moves logs to use PHIDs instead of IDs. This generally improves flexibility (for example, it's a lot easier to render handles).
- Adds `blueprintPHID` to logs. Although you can usually figure this out from the leasePHID or resourcePHID, it lets us query relevant logs on Blueprint views.
- Instead of making logs a top-level object, make them strictly a sub-object of Blueprints, Resources and Leases. So you go Drydock > Lease > Logs, etc., to get to logs.
- I might restore the "everything" view eventually, but it doesn't interact well with policies and I'm not sure it's very useful. A policy-violating `bin/drydock log` might be cleaner.
- Policy-wise, we always show you that logs exist, we just don't show you log content if it's about something you can't see. This is similar to seeing restricted handles in other applications.
- Instead of just having a message, give logs "type" + "data". This will let logs be more structured and translatable. This is similar to recent changes to Herald which seem to have worked well.
Test Plan:
Added some placeholder log writes, viewed those logs in the UI.
{F855199}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14196
Summary: Ref T9252. Show the user when a resource or lease has a pending release command in queue.
Test Plan: Released a resource and lease from the web UI. In both cases, saw a "releasing" tag and the action disable.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14177
Summary: Ref T9252. This is the same as D14157, just for Resources and their leases.
Test Plan: Viewed a resource, saw only active leases, clicked "View All Leases", queried, clicked around, used crumbs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14158
Summary:
Ref T9252. Currently, Drydock blueprint pages:
- show all resources, even if there are a million;
- show resources in all states, although destroyed resources are usually uninteresting;
- have some junky `$pager` code.
Instead, show the few most recent active resources and link to a filtered resource view in ApplicationSearch.
Test Plan:
- Viewed some blueprints.
- Clicked "View All Resources".
- Saw all resources.
- Used query / crumbs / etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14157
Summary: Ref T9252. If you have a blueprint and you do not like that blueprint very much, you can disable it.
Test Plan: Disabled / enabled some blueprints.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14156
Summary:
Ref T9252. Move these to the more modern stuff to pick up ordering and interface support for free.
Also work around the blueprint / custom field integration a little more gracefully.
Test Plan: Searched for blueprints, resources and leases.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14155
Summary:
Ref T9252. Drydock currently uses integer statuses, but there's no reason for this (they don't need to be ordered) and it makes debugging them, working with them, future APIs, etc., more cumbersome.
Switch to string instead.
Also rename `STATUS_OPEN` to `STATUS_ACTIVE` and `STATUS_CLOSED` to `STATUS_RELEASED` for consistency. This makes resources and leases have more similar states, and gives resource states more accurate names.
Test Plan: Browsed web UI, grepped for changed constants, applied patch, inspected database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14153
Summary:
Ref T9252. Leases currently have a `resourceID`, but this is a bit nonstandard and generally less flexible than giving them a `resourcePHID`.
In particular, a `resourcePHID` is easier to use when rendering interfaces, since you can get handles out of a PHID.
Add a PHID column, copy over all the PHIDs that correspond to existing IDs, then drop the ID column.
Test Plan:
- Browsed web UIs.
- Inspected database during/after migration.
- Grepped for `resourceID`.
- Allocated a new lease with `bin/drydock lease`.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14151
Summary:
Ref T9252. Broadly, Drydock currently races on releasing objects from the "active" state. To reproduce this:
- Scatter some sleep()s pretty much anywhere in the release code.
- Release several times from web UI or CLI in quick succession.
Resources or leases will execute some release code twice or otherwise do inconsistent things.
(I didn't chase down a detailed reproduction scenario for this since inspection of the code makes it clear that there are no meaningful locks or mechanisms preventing this.)
Instead, add a Harbormaster-style command queue to resources and leases. When something wants to do a release, it adds a command to the queue and schedules a worker. The workers acquire a lock, then try to consume commands from the queue.
This guarantees that only one process is responsible for writes to active resource/leases.
This is the last major step to giving resources and leases a single writer during all states:
- Resource, Unsaved: AllocatorWorker
- Resource, Pending: ResourceWorker (Possible rename to "Allocated?")
- Resource, Open: This diff, ResourceUpdateWorker. (Likely rename to "Active").
- Resource, Closed/Broken: Future destruction worker. (Likely rename to "Released" / "Broken"; maybe remove "Broken").
- Resource, Destroyed: No writes.
- Lease, Unsaved: Whatever wants the lease.
- Lease, Pending: AllocatorWorker
- Lease, Acquired: LeaseWorker
- Lease, Active: This diff, LeaseUpdateWorker.
- Lease, Released/Broken: Future destruction worker (Maybe remove "Broken"?)
- Lease, Expired: No writes. (Likely rename to "Destroyed").
In most phases, we can already guarantee that there is a single writer without doing any extra work. This is more complicated in the "Active" case because the release buttons on the web UI, the release tools on the CLI, the lease requestor itself, the garbage collector, and any other release process cleaning up related objects may try to effect a release. All of these could race one another (and, in many cases, race other processes from other phases because all of these get to act immediately) as this code is currently written. Using a queue here lets us make sure there's only a single writer in this phase.
One thing which is notable is that whatever acquires a lease **can not write to it**! It is never the writer once it queues the lease for activation. It can not write to any resources, either. And, likewise, Blueprints can not write to resources while acquiring or releasing leases.
We may need to provide a mechinism so that blueprints and/or resource/lease holders get to attach some storage to resources/leases for bookkeeping. For example, a blueprint might need to keep some kind of cache on a resource to help it manage state. But I think we can cross that bridge when we come to it, and nothing else would need to write to this storage so it's technically straightforward to introduce such a mechanism if we need one.
Test Plan:
- Viewed buttons in web UI, checked enabled/disabled states.
- Clicked the buttons.
- Saw commands show up in the command queue.
- Saw some daemon stuff get scheduled.
- Ran CLI tools, saw commands get consumed and resources/leases release.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14143
Summary:
Ref T9253. Broadly, this realigns Allocator behavior to be more consistent and straightforward and amenable to intended future changes.
This attempts to make language more consistent: resources are "allocated" and leases are "acquired".
This prepares for (but does not implement) optimistic "slot locking", as discussed in D10304. Although I suspect some blueprints will need to perform other locking eventually, this does feel like a good fit for most of the locking blueprints need to do.
In particular, I've made the blueprint operations on `$resource` and `$lease` objects more purposeful: they need to invoke an activator on the appropriate object to be implemented correctly. Before they invoke this activator method, they configure the object. In a future diff, this configuration will include specifying slot locks that the lease or resource must acquire. So the API will be something like:
$lease
->setActivateWhenAcquired(true)
->needSlotLock('x')
->needSlotLock('y')
->acquireOnResource($resource);
In the common case where slot locks are a good fit, I think this should make correct blueprint implementation very straightforward.
This prepares for (but does not implement) resources and leases which need significant setup steps. I've basically carved out two modes:
- The "activate immediately" mode, as here, immediately opens the resource or activates the lease. This is appropriate if little or no setup is required. I expect many leases to operate in this mode, although I expect many resources will operate in the other mode.
- The "allocate now, activate later" mode, which is not fully implemented yet. This will queue setup workers when the allocator exits. Overall, this will work very similarly to Harbormaster.
- This new structure makes it acceptable for blueprints to sleep as long as they want during resource allocation and lease acquisition, so long as they are not waiting on anything which needs to be completed by the queue. Putting a `sleep(15 * 60)` in your EC2Blueprint to wait for EC2 to bring a machine up will perform worse than using delayed activation, but won't deadlock the queue or block any locks.
Overall, this flow is more similar to Harbormaster's flow. Having consistency between Harbormaster's model and Drydock's model is good, and I think Harbormaster's model is also simply much better than Drydock's (what exists today in Drydock was implemented a long time ago, and we had more support and infrastructure by the time Harbormaster was implemented, as well as a more clearly defined problem).
The particular strength of Harbormaster is that objects always (or almost always, at least) have a single, clearly defined writer. Ensuring objects have only one writer prevents races and makes reasoning about everything easier.
Drydock does not currently have a clearly defined single writer, but this moves us in that direction. We'll probably need more primitives eventually to flesh this out, like Harbormaster's command queue for messaging objects which you can't write to.
This blueprint was originally implemented in D13843. This makes a few changes to the blueprint itself:
- A bunch of code from that (e.g., interfaces) doesn't exist yet.
- I let the blueprint have multiple services. This simplifies the code a little and seems like it costs us nothing.
This also removes `bin/drydock create-resource`, which no longer makes sense to expose. It won't get locking, leasing, etc., correct, and can not be made correct.
NOTE: This technically works but doesn't do anything useful yet.
Test Plan: Used `bin/drydock lease --type host` to acquire leases against these blueprints.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Subscribers: Mnkras
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14117
Summary:
Ref T9253. Some of the Drydock code is pretty old. This applies standard modernizations to it:
- Modernize Query classes to use stuff like `buildWhereClauseParts()` and `loadStandardPage()`.
- Modernize all the getX() / attachX() stuff. In particular:
- Require and attach implementations to Blueprints.
- Require and attach Blueprints to Resources.
- BlueprintImplementations are now always unique per-Blueprint so they can store/cache state if they want without running over one another.
- BlueprintImplementations are now passed a `$blueprint`, like other similar APIs (this could go various ways but I generally like this as a balance of concerns).
NOTE: This probably doesn't run on its own, I'm just trying to split the next diff (core allocator stuff) up a bit and these pieces are all pretty standard.
Test Plan:
- Not much; see next revision or two.
- Clicked around Resource and Blueprint lists.
Reviewers: chad, hach-que
Reviewed By: chad, hach-que
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14113
Summary: Ref T2015. This fixes issues where the Drydock queries wouldn't filter (or throw an exception) when passed empty arrays for their `with` methods. In addition, this also adds `array_unique` to the resource and lease subqueries so that we don't pull in a bunch of stuff if logs or leases have the same related objects.
Test Plan: Tested it by using DarkConsole on the log controller.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: joshuaspence, Korvin, epriestley
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D10879
Summary: Ref T2015. This allows searching based on blueprints, resources or leases when viewing the logs, which helps when searching for events that occured to a particular blueprint / resource / lease. Unlike the logs shown on the resource / lease pages, the search engine supports paging properly, which means it can be used to find entries in the past.
Test Plan: Used the Drydock log search page.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: joshuaspence, Korvin, epriestley
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D10874
Summary:
Ref T8659. In the general case, this eventually allows build processes to do things like:
- Upload build results (like a ".app" or ".exe" or other binary).
- Pass complex results between build steps (e.g., build step A does something hard and build step B uses it to do something else).
Today, we're a long way away from having the infrastructure for that. However, it is useful to let third party build processes (like Jenkins) upload URIs that link back to the external build results.
This adds `harbormaster.createartifact` so they can do that. The only useful thing to do with this method today is have your Jenkins build do this:
params = array(
"uri": "https://jenkins.mycompany.com/build/23923/details/",
"name": "View Build Results in Jenkins",
"ui.external": true,
);
harbormaster.createartifact(target, 'uri', params);
Then (after the next diff) we'll show a link in Differential and a prominent link in Harbormaster. I didn't actually do the UI stuff in this diff since it's already pretty big.
This change moves a lot of code around, too:
- Adds PHIDs to artifacts.
- It modularizes build artifact types (currently "file", "host" and "URI").
- It formalizes build artifact parameters and construction:
- This lets me generate usable documentation about how to create artifacts.
- This prevents users from doing dangerous or policy-violating things.
- It does some other general modernization.
Test Plan:
{F715633}
{F715634}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8659
Differential Revision: https://secure.phabricator.com/D13900
Summary: Fixes T8655. This isn't actually a table -- just use `setContent()`.
Test Plan: Loaded leases in redesign-2015.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8655
Differential Revision: https://secure.phabricator.com/D13431
Summary: Ref T8099. This adds a new class which all search engines return for layout. I thought about this a number of ways, and I think this is the cleanest path. Each Engine can return whatever UI bits they needs, and AppSearch or Dashboard picks and lays the bits out as needed. In the AppSearch case, interfaces like Notifications, Calendar, Legalpad all need more custom layouts. I think this also leaves a resonable path forward for NUX as well. Also, not sure I implemented the class correctly, but assume thats easy to fix?
Test Plan: Review and do a search in each application changed. Grep for all call sites.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13332
Summary:
Ref T4100. Ref T5595.
To support a unified "Projects:" query across all applications, a future diff is going to add a set of "Edge Logic" capabilities to `PolicyAwareQuery` which write the required SELECT, JOIN, WHERE, HAVING and GROUP clauses for you.
With the addition of "Edge Logic", we'll have three systems which may need to build components of query claues: ordering/paging, customfields/applicationsearch, and edge logic.
For most clauses, queries don't currently call into the parent explicitly to get default components. I want to move more query construction logic up the class tree so it can be shared.
For most methods, this isn't a problem, but many subclasses define a `buildWhereClause()`. Make all such definitions protected and consistent.
This causes no behavioral changes.
Test Plan: Ran `arc unit --everything`, which does a pretty through job of verifying this statically.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, hach-que, epriestley
Maniphest Tasks: T4100, T5595
Differential Revision: https://secure.phabricator.com/D12453
Summary: Fixes T7118. This does the basic "filter the list" thing, though it ends up being a little manual since I guess this hasn't come up before? There is also potential weird behavior if the user was using an app and lost access to it - they will have nothing selected on edit - but I think this is actually correct behavior in this circumstance.
Test Plan:
used a user who couldn't get access to the "quick create" apps and noted that the dropdown list on dashboard panel create was missing the expected engines
ran `arc unit --everything` to verify abstract method implemented everywhere
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7118
Differential Revision: https://secure.phabricator.com/D11687
Summary: Ref T6822.
Test Plan: Visual inspection. These methods are only called from within the `PhabricatorApplicationSearchEngine` class.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11242
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: Ref T4986. Instead of requiring users to know the name of an application search engine class, let them select from a list.
Test Plan:
Created a new panel.
{F165468}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9500
Summary: Ref T4986. Allows the Drydock search engines to render as panels.
Test Plan: Viewed affected interfaces in Drydock. Created panels from each engine.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9103
Summary: Ref T4986. These are mostly mechanical now, I skipped a couple of slightly tricky ones. Still a bunch to go.
Test Plan:
For each engine:
- Viewed the application;
- created a panel to issue the query.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9017
Summary: Ref T2015. All the Drydock query classes share the application method; move it into a shared base class to slightly shrink the codebase.
Test Plan: Browsed query UIs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7837
Summary:
Ref T2015. Moves a bunch of raw object loads into modern policy-aware queries.
Also straightens out the Log and Lease policies a little bit: there are legitimate states where these objects are not attached to a resource (particularly, while a lease is being acquired). Handle these more gracefully.
Test Plan: Lint / browsed stuff.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7836
Summary:
Ref T2015. Currently, Drydock has a `wait-for-lease` workflow which is invoked in the background by the `lease` workflow.
The goal of this mechanism is to allow `bin/drydock lease` to print out logs as the lease is acquired. However, this predates the `runAllTasksInProcess` flags, and they provide a simpler and more robust way (potentially with `--trace` and `PhutilConsole`) to do synchronous execution and debug logging.
Simplify this whole mechanism: just run everything in-process in `bin/drydock lease`, and do logging via `--trace`. We could thread a `PhutilConsole` through things too, but this seems good enough for now.
Also various cleanup/etc.
Test Plan: Ran `bin/drydock lease`. Ran `bin/harbormaster build X --plan Y`, for `Y` being a Drydock-dependent build plan.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7835
Summary: Ref T2015. Update DrydockLog for policy awareness and give it a policy query.
Test Plan: Browsed all the log interfaces.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7831
Summary: Ref T2015. This turns the side nav into a bigger mess for now, but uses ApplicationSearch for blueprints.
Test Plan: Queried blueprints in the UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7829
Summary:
Ref T2015. These never got updated to the new stuff, move them out of the old `Constants` class and let them load handles, etc.
Also some half-cleanup of some Blueprint/BlueprintImplementation stuff.
Test Plan: Used `phid.query` to query a Resource, Lease, and Blueprint.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7828
Summary:
Ref T2015. Applies ApplicationSearch to DrydockLease.
This makes the left nav in Drydock a little funky. It will probably get worse for a bit before it gets better, since I want to bring everything to ApplicationSearch and then sort out the details.
Test Plan: Queried leases in Drydock.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7827
Summary: Ref T2015. DrydockLease predates widespread adoption of policies. Make it -- and its query -- policy aware.
Test Plan: Browsed leases from the web UI. Grepped for callsites.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7826
Summary: This implements a build step for uploading an artifact from a build machine to Phabricator. It uses SFTP so that it will work on both UNIX and Windows build machines.
Test Plan: Ran an "Upload Artifact" build against a Windows machine (with FreeSSHD installed). The artifact uploaded to Phabricator, appeared on the build view and the file contents could be viewed from Phabricator.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7582
