Summary:
Ref T3886. Broadly, fields break down into two types right now: fields which store data on the object (like `DifferentialTitleField`) and fields which store data in custom field storage.
The former type generally reads data from the object into local storage prior to editing, then writes it back afterward. Currently, this happens in `didSetObject()`.
However, now that we load and set objects from ApplicationTransactionQuery, we'll do this extra read-field-values on view interfaces too. There, it's unnecessary and sometimes throws data-attached exceptions.
Instead, separate these concepts, and do all the read-from-object / read-from-storage in one logical chunk, separate from `didSetObject()`.
Test Plan:
- Edited Differential revision.
- Edited Maniphest task.
- Edited Project.
- Edited user profile.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886
Differential Revision: https://secure.phabricator.com/D8299
Summary: Ref T4361. Projects are mailable now, so let them show up in mail contexts.
Test Plan: Added a project as a CC to a task, filtered by project CCs, etc.
Reviewers: btrahan, zeeg, dctrwatson
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4361
Differential Revision: https://secure.phabricator.com/D8274
Summary:
Ref T4420. Tokenizers currently operate in "preload" or "ondemand" modes. In the former mode, which is default, they'll try to load the entire result list when a page loads.
The theory here was that this would slightly improve the experience for small installs, and once they got big enough they could switch to "ondemand". In practice, several issues have arisen:
- We generally don't have a good mechanism for telling installs that they should tweak perf config -- `metamta.send-immediately` is the canonical example here. Some large installs are probably affected negatively by not knowing to change this setting, and having settings like this is generally annoying.
- We have way way too much config now.
- With the advent of ApplicationSearch, pages like Maniphest make many redundant loads to prefill sources like projects. Most of the time, this data is not used. It's far simpler to switch everything to ondemand than try to deal with this, and dealing with this would mean creating two very complex divergent pathways in the codebase for a mostly theoretical performance benefit which only impacts tiny installs.
- We've been using `tokenizer.ondemand` forever on `secure.phabricator.com` since we have many thousands of user accounts, and it doesn't seem sluggish and works properly.
Removing this config is an easy fix which makes the codebase simpler.
I've retained the ability to use preloaded sources, since they may make sense in some cases (in at least one case -- task priorities -- adding a static source pathway might make sense), and they're part of Javelin itself. However, the code will no longer ever go down that pathway.
Test Plan: Used `secure.phabricator.com` for years with this setting enabled.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8232
Summary:
Ref T1279. The new dual-mode user/project tokenizers are a bit disorienting. Provide content type hints.
Very open to any suggestions here, most of this patch is just getting the right data in the right places. We can change things up pretty easily.
- I like the little icons in the tokens themselves, I think they look good and are useful.
- I'm less sold on the '(Project)' thing I did in the dropdown. We can easily make this richer if you have thoughts on it -- we could put icons in the left column maybe? Or right-justify the types?
- I made it always sort users above projects.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran, carl
Maniphest Tasks: T4420, T1279
Differential Revision: https://secure.phabricator.com/D7250
Summary: Ref T4375. Basic ApplicationSearch integration to power this more flexibly.
Test Plan: {F108762}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4375
Differential Revision: https://secure.phabricator.com/D8148
Summary:
Ref T156. @vlada recently implemented filename search in Diffusion, this cleans up the UI a little bit:
- Instead of showing one search box with two different buttons, let the submit buttons appear to the right of the text boxes and separate the search modes.
- Clean up the results a little bit (don't show columns which don't exist).
Test Plan: {F107260}
Reviewers: vlada, btrahan, chad
Reviewed By: chad
CC: vlada, chad, aran
Maniphest Tasks: T156
Differential Revision: https://secure.phabricator.com/D8125
Summary:
Ref T156. Adds basic filename search support for Diffusion,
currently only for Git repositories.
This is preliminary, and it's up for discussion:
- is the UI in the right place;
- what should the search query syntax be (e.g. whether
to put `*`s in the beginning and end of it);
- how to best approach it for Mercurial and/or SVN;
- what's the cleanest result format for `lsquery` (I went
for the minimum necessary change to `DiffusionBrowseSearchController`).
Test Plan:
Browse to a repository in Diffusion, and use both
`Search File Names` and `Search File Content`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T156
Differential Revision: https://secure.phabricator.com/D8093
Summary:
Fixes T4242. It's currently possible to set nonsense defaults and create repositories with unintended policies, because policy configuration isn't part of creation. Instead:
- put a policy page into the creation workflow;
- require the selection of valid policies (i.e., prevent creating a repository you can't view / edit).
Test Plan:
- Created imported and hosted repositories, hit policy selection.
- Edited policies of existing repositories.
- Tried to set nonsense policies.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4242
Differential Revision: https://secure.phabricator.com/D7856
Summary:
Ref T4122. Implements a credential management application for the uses described in T4122.
@chad, this needs an icon, HA HA HAHA HA BWW HA HA HA
bwahaha
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7608
Test Plan: This is one of the rare moments where unit tests for views would be useful.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7547
Summary: The idea is to have all `phtize` definitions in applications to allow their separation.
Test Plan: Clicked View Options after mangling the translation.
Reviewers: epriestley
Reviewed By: epriestley
CC: btrahan, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7345
Summary:
Basically straight from D7391. The differences are basically:
- Policy stuff is all application-scope instead of global-scope.
- Made a few strings a little nicer.
- Deleted a bit of dead code.
- Added a big "THIS DOESN'T WORK YET" warning.
Test Plan: See screenshots.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7416
Summary:
Ref T2231. Allows you to edit the remote URI and credentials.
This is a little bit funky because I'm reusing some of the pages on the new (not-yet-hooked-up) create form. Specifically, it had pages like this:
- Repo Type
- Name/Callsign/Remote
- Auth
- Done
I split "Name/Callsign/Remote" into "Name/Callsign" and "Remote", then when editing the remote I just take you through "Remote" and "Auth" and then back. This lets us reuse the giant pile of protocol/URI sanity checking logic and ends up being pretty clean, although it's a little weird that the "Create" controller does both full-create and edit-remote.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7405
Summary: Believe it or not, I forgot how to create a link in Remarkup.
Test Plan: Clicked on it with selected URL, selected text and without a selection.
Reviewers: chad, epriestley
Reviewed By: epriestley
CC: epriestley, aran, chad
Differential Revision: https://secure.phabricator.com/D7336
Summary: Ref T603. When a user selects "Custom", we pop open the rules dialog and let them create a new rule or edit the existing rule.
Test Plan: Set some objects to have custom policies.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7300
Summary: Ref T603. Make this a little easier to use by highlighting the current value.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7289
Summary: Ref T603. After thinking about this for a bit I can't really come up with anything better than what Facebook does, so I'm going to implement something similar for choosing custom policies. To start with, swap this over to a JS-driven dropdown.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7285
Summary: Ref T603. Currently, we hard-code defense against setting policies to "Public" in several places, and special case only the CAN_VIEW policy. In fact, other policies (like Default View) should also be able to be set to public. Instead of hard-coding this, move it to the capability definitions.
Test Plan: Set default view policy in Maniphest to "Public", created a task, verified default policy.
Reviewers: btrahan, asherkin
Reviewed By: asherkin
CC: asherkin, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7276
Summary: Ref T603. When the user encounters an action which is controlled by a special policy rule in the application, make it easier for applications to show the user what policy controls the action and what the setting is. I took this about halfway before and left a TODO, but turn it into something more useful.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7265
Summary: Ref T1279. Prerequisite for adding icons or other type information to tokenizers, since we don't currently have enough information to prefill them when rendering things from the server side. By passing handles in, the tokenizer can extract type information.
Test Plan:
- Searched by user in Audit.
- Sent Conpherence from profile page.
- Tried to send an empty conpherence.
- Searched Countdown by user.
- Edited CCs in Differential.
- Edited reviewers in Differential.
- Edited a commit's projects.
- Searched lint by owner.
- Searched feed by owner/project.
- Searched files by owner.
- Searched Herald by owner.
- Searched Legalpad by owner.
- Searched Macro by owner.
- Filtered Maniphest reports by project.
- Edited CCs in Maniphest.
- Searched Owners by owner.
- Edited an Owners package.
- Searched Paste by owner.
- Searched activity logs by owner.
- Searched for mocks by owner.
- Edited a mock's CCs.
- Searched Ponder by owner.
- Searched projects by owner.
- Edited a Releeph project's pushers.
- Searched Releeph by requestor.
- Edited "Uses Symbols" for an Arcanist project.
- Edited all tokenizers in main search.
- Searched Slowvote by user.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7248
Summary:
Ref T1279. Two changes to the search/query for Differential:
- "Reviewers" now accepts users and projects.
- "Responsible Users" now includes revisions where a project you are a member of is a reviewer.
Test Plan:
- Searched for project reviewers.
- Verified that the dashboard now shows reviews which I'm only part of via project membership.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7231
Summary: Restores any/all/user/exclude project filters to the new search.
Test Plan: Filtered stuff by projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6951
Summary:
Fixes T3782. Two changes:
- Remove the "Chaos" mode, which wasn't as funny as I'd hoped and has had a good run.
- Fix "Order" (now "Fullscreen") mode in Conpherence. Best fix I could come up with is dropping the "position: fixed" on all parents while in the mode.
Test Plan: Used Fullscreen mode in Conpherence in Chrome.
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3782
Differential Revision: https://secure.phabricator.com/D6844
Summary:
Ref T3721. Releeph currently attempts to implement a flexible, field-driven search for branches, but it's building all of its own infrastructure and it ends up heading down some weird paths. In particular, it loads **every** request and then makes calls into fields to filter them. It also tries to be very very general, which isn't really necessary (for example, I think it's reasonable for us to assume that we won't let you disable the "requestor" field).
ApplicationSearch and CustomField provide more scalable approaches to this problem; move search on top of them. The query still ends up doing some filtering in-process, but it's now far more limited in scope and can be denormalized later.
Test Plan: {F54304}
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T3721
Differential Revision: https://secure.phabricator.com/D6758
Summary:
Ref T3572. Needs some CSS tweaks, but this lets you drag an image on top of another image to replace it. There's no server-side or transaction support (and I'm not planning to build that), I just wanted to clear the way on the JS side.
You'll get an additional array posted called `replaces`. Keys are old file PHIDs; values are new file PHIDs.
Note that a key may not exist yet (if a user adds an image, and then also replaces that same image). In this case, the server should just treat it as an add.
Test Plan: Dragged images on top of other images.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3572
Differential Revision: https://secure.phabricator.com/D6499
Summary: Fixes T3553. Did it by adding some code that refreshes the File object on keyup events within a given file entry. also fixes an html derp I found trying to fix this.
Test Plan: added cool things like 'bbb' to every field and noted they were maintained when I added more files
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, Korvin, chad
Maniphest Tasks: T3553
Differential Revision: https://secure.phabricator.com/D6488
Summary:
Nice title. We add three new transactions - IMAGE_FILE, IMAGE_NAME, and IMAGE_DESCRIPTION. The first is a bit like subscribers as it is a list of file phids. The latter have values of the form ($file_phid => $data), where $data is $name or $description respectively. This is because we need to collate transactions based on $file_phid...
Overall, this uses the _underyling files_ and not the "PholioImage" to determine if things are unique or not. That said, simply mark PholioImages as obsolete so inline comments about no-longer applicable PholioImages don't break.
Does a reasonable job implementing the mock. Note you can't "update" an image at this time, though you can delete and add at will.
Test Plan: played with pholio a ton.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T3489
Differential Revision: https://secure.phabricator.com/D6441
Summary: Ref T2231. Ref T2232. This form doesn't do anything yet and there are no link sto it, but it lets you enter all the data to create a repository in a relatively simple, straightforward way.
Test Plan:
{F49740}
{F49741}
{F49742}
{F49743}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231, T2232
Differential Revision: https://secure.phabricator.com/D6430
Summary:
Addes a button group to filter tasks by agents, non-agents or all.
Fixes T3394
Test Plan: View task list, filter by agents, filter by non agents. Make sure the correct tasks display.
Reviewers: epriestley, dctrwatson
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3394
Differential Revision: https://secure.phabricator.com/D6328
Summary:
Ref T1536.
- When users try to add a one-of provider which already exists, give them a better error (a dialog explaining what's up with reasonable choices).
- Disable such providers and label why they're disabled on the "new provider" screen.
Test Plan:
{F47012}
{F47013}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6256
Summary: Touches a lot of little spacing things here and there, stuck to 4px grid when possible, checked mobile views.
Test Plan: Mobile, Logging In, Multiple Providers.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6220
Summary:
Ref T1163. Ref T2625. This could probably use some tweaks, but I kept things mostly-generic.
I added a new control for freeform dates so we can have it render help or whatever later on.
Test Plan: See screenshots.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625, T1163
Differential Revision: https://secure.phabricator.com/D6084
Summary:
Fixes T3279. For ApplicationSearch (and in some other cases) I'd like users to be able to provide an optional date. This isn't currently possible.
Add a checkbox which disables or enables the input.
Test Plan: Used UIExample to enter dates. Used Calendar to enter dates.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3279
Differential Revision: https://secure.phabricator.com/D6082
Summary: Add a button to the Remarkup area that explains how to attach an image and remove the separate upload field.
Test Plan: Check that the dialog pops up correctly and that dropping images onto the Remarkup area works.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T879
Differential Revision: https://secure.phabricator.com/D6049
Summary:
Ref T2232. Very busy day on IRC so I feel like I've made 20 minutes of progress in 1-minute spurts here, but this adds the basics for a form that can have multiple pages and automatically handle pagination and reading to/from the request, objects and responses.
The UIExample is reasonably instructive. Basically, you make a form, add pages to the form, and add controls to the pages. The core flow control looks like this:
if ($request->isFormPost()) {
$form->readFromRequest($request); // (1)
if ($form->isComplete()) { // (2)
$response = $form->writeToResponse($response); // (3)
// Process result here. // (4)
}
} else {
$form->readFromObject($object); // (5)
}
The key parts are:
# This reads the form state from the request, including reading all the inactive pages.
# This tests if all pages are valid and the user just clicked "Done" on the last page.
# This produces a "response", which might be writing to an object (for simpler forms) or creating a transaction record (for more complex forms).
# Here, we would save the object or apply the transactions.
# When the user views the form for the first time, we preload all the values from some object (which might just be empty).
Ultimate goal here is to fix repository creation to not be a terrible pit of awfulness.
There are probably a lot of rough edges and missing features still, but this seems to not be totally crazy.
I'm using two submit buttons with different names which doesn't work on IE7 or something, but we can JS our way out of that if we need to.
Test Plan: Paged forward and backward through the form.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2232
Differential Revision: https://secure.phabricator.com/D6003
Summary:
We have a few interfaces where add "Edit", "Delete" or some other action to a list. Currently, this happens via icons, but these are cumbersome and weird, are inconsistent, can't be workflow'd, are hard to hit on desktops and virtually impossible to hit on mobile, and generally just feel iffy to me. Prominent examples are Projects and Flags. I'd like to try adding an "edit" action to Maniphest (to provide quick edit from list views, basically). It looks like some of Releeph would benefit here, as well.
Instead, provide first-class actions:
{F42978}
They produce targets which my meaty ham-fists can plausibly hit on mobile, too:
{F42979}
(We could do some kind of swipe-to-expose thing eventually, but I think putting them by default is OK?)
Test Plan: Added UIExamples. Checked desktop/mobile.
Reviewers: chad, btrahan, edward
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5890
Summary:
Ref T2599.
Implements an "order" mode which fullscreens the editor and reduces distractions, similar to Asana's "focus" mode and GitHub's "zen" mode. This can help users who need fewer distractions get work done.
Implements a "chaos" mode which does the opposite. This can help users who need more distractions to get work done.
Test Plan: Clicked "order" and "chaos" buttons.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2599
Differential Revision: https://secure.phabricator.com/D5735
Summary: Like AphrontFormToggleButtonsControl, but with mouseover counters. These counters let you know how many of each thing there are in each category, which is useful when using this control for filtering a list of things in multiple dimensions.
Test Plan: `/uiexample/view/PhabricatorCountedToggleButtonsExample/`
Reviewers: epriestley
CC: aran, Korvin
Maniphest Tasks: T2094
Differential Revision: https://secure.phabricator.com/D5118
Summary: After D5305, this method does nothing since we automatically figure out what we need to do.
Test Plan:
- Viewed a page with the main menu on it (MainMenuView).
- Viewed a revision with transactions on it (TransactionView).
- Viewed timeline UIExample (TimelineView, TimelineEventView).
- Viewed a revision (PropertyListView).
- Viewed a profile (ProfileHeaderView).
- Viewed Pholio list (PinboardView, PinboardItemView).
- Viewed Config (ObjectItemView, ObjectItemListView).
- Viewed Home (MenuView).
- Viewed a revision (HeaderView, CrumbsView, ActionListView).
- Viewed a revision with an inline comment (anchorview).
- Viewed a Phriction diff page (AphrontCrumbsView).
- Filed T2721 to get rid of this.
- Looked at Pholio and made inlines and comments (mockimages, pholioinlinecomment/save/edit).
- Looked at conpherences.
- Browsed around.
Reviewers: chad, vrana
Reviewed By: chad
CC: edward, aran
Differential Revision: https://secure.phabricator.com/D5307
Summary:
actually just wanted to `pht()` the //Cancel// button.
includes `pht()`ed exceptions.
refrained from `pht()`-ing `phabricator_relative_date()` since I wasn't too sure about the effects.
Test Plan: visited all form elements that I remembered - looks reasonable
Reviewers: epriestley, chad, btrahan
Reviewed By: chad
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5175
Summary: Mostly applies a new call spacing rule; also a few things that have slipped through via pull requests and such
Test Plan: `find src/ -type f -name '*.php' | xargs -n16 arc lint --output summary --apply-patches`
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5002
Summary: They are same because render() returns safe HTML and raw strings are automatically escaped.
Test Plan: None.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4909
