Summary:
Ref T10335. When you (for example) drag a "Resolved" task into a column with "Trigger: change status to resolved.", don't show a hint that the action will "Change status to resolved." since this isn't helpful and is somewhat confusing.
For now, the only visibility operator is "!=" since all current actions are simple field comparisons, but some actions in the future (like "add subscriber" or "remove project") might need other conditions.
Test Plan:
Dragged cards in ways that previously provided useless hints: move from column A to column B on a "Group by Priority" board; drag a resolved task to a "Trigger: change status to as resolved" column. Saw a more accurate preview in both cases.
Drags which actually cause effects still show the effects correctly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335
Differential Revision: https://secure.phabricator.com/D20300
Summary:
Ref T10335. Ref T5474. When you drag-and-drop a card on a workboard, show a UI hint which lists all the things that the operation will do.
This shows: column moves; changes because of dragging a card to a different header; and changes which will be caused by triggers.
Not implemented here:
- Actions are currently shown even if they have no effect. For example, if you drag a "Normal" task to a different column, it says "Change priority to Normal.". I plan to hide actions which have no effect, but figuring this out is a little bit tricky.
- I'd like to make "trigger effects" vs "non-trigger effects" a little more clear in the future, probably.
Test Plan:
Dragged stuff between columns and headers, and into columns with triggers. Got appropriate preview text hints previewing what the action would do in the UI.
(This is tricky to take a screenshot of since it only shows up while the mouse cursor is down.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335, T5474
Differential Revision: https://secure.phabricator.com/D20299
Summary:
Depends on D20274. Ref T10578. This is en route to an ordering by points, it's just a simpler half-step on the way there.
Allow columns to be sorted by creation date, so the newest tasks rise to the top.
In this ordering you can never reposition cards, since editing a creation date by dragging makes no sense. This will be true of the "points" ordering too (although we could imagine doing something like prompting the user, some day).
Test Plan: Viewed boards by "natural" (allows reordering both when dragging within and between columns), "priority" (reorder only within columns), and "creation date" (reorder never). Dragged cards around between and within columns, got apparently sensible behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10578
Differential Revision: https://secure.phabricator.com/D20275
Summary:
Depends on D20273. Fixes T10722. Currently, we don't make it very clear when a card can't be edited. Long ago, some code made a weak attempt to do this (by hiding the "grip" on the card), but later UI changes hid the "grip" unconditionally so that mooted things.
Instead:
- Replace the edit pencil with a red lock.
- Provide cursor hints for grabbable / not grabbable.
- Don't let users pick up cards they can't edit.
Test Plan: On a workboard with a mixture of editable and not-editable cards, hovered over the different cards and was able to figure out which ones I could drag or not drag pretty easily. Picked up cards I could pick up, wasn't able to drag cards I can't edit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10722
Differential Revision: https://secure.phabricator.com/D20274
Summary:
Depends on D20271. Ref T10333. When a column is empty but a board is grouped (by priority, owner, etc) render the headers properly.
When a column has headers, don't apply the "empty" style even if it has no cards. This style just makes some empty space so you can drag-and-drop more easily, but headers do the same thing.
Test Plan: {F6264611}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20272
Summary:
Depends on D20267. Depends on D20268. Ref T10333. Currently, we support "Natural" and "Priority" orders, but a lot of the particulars are pretty hard-coded, including some logic in `ManiphestTask`.
Although it's not clear that we'll ever put other types of objects on workboards, it seems generally bad that you need to modify `ManiphestTask` to get a new ordering.
Pull the ordering logic out into a `ProjectColumnOrder` hierarchy instead, and let each ordering define the things it needs to work (name, icon, what headers look like, how different objects are sorted, and how to apply an edit when you drop an object under a header).
Then move the existing "Natural" and "Priority" orders into this new hierarchy.
This has a minor bug where using the "Edit" workflow to change a card's priority on a priority-ordered board doesn't fully refresh card/header order since the response isn't ordering-aware. I'll fix that in an upcoming change.
Test Plan: Grouped workboards by "Natural" and "Priority", dragged stuff around within and between columns, grepped for all touched symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20269
Summary:
Depends on D20266. Boards currently have several `whateverMap<cardPHID => stuff>` properties, but we can just move these all down into a `CardTemplate`, similar to the recently introduced `HeaderTemplate`.
The `CardTemplate` holds all the global information for a card, and then `Card` is specific for a particular copy in a column. Today, each `CardTemplate` has one `Card`, but a `CardTemplate` may have more than one card in the future (when we add subproject columns).
Test Plan: Viewed workboards in different sort orders and dragged stuff around, grepped for all affected symbols.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20267
Summary:
Depends on D20263. Ref T10333. I want to add groups like "Assignee" to workboards. This means you may have several tasks grouped under, say, "Alice".
When you drag the bottom-most task under "Alice" to the top, what does that mean?
Today, the only grouping is "Priority", and it means "change the task's secret/hidden global subpriority". However, this seems to generally be a somewhat-bad answer, and is quite complex. It also doesn't make much sense for an author grouping, since one task can't really be "more assigned" to Alice than another task.
Users likely intend this operation to mean "move it, visually, with no other effects" -- that is, user intent is to shuffle sticky notes around on a board, not edit anything substantive. The meaning is probably something like "this is similar to other nearby tasks" or "maybe this is a good place to start", which we can't really capture with any top-level attribute.
We could extend "subpriority" and give tasks a secret/hidden "sub-assignment strength" and so on, but this seems like a bad road to walk down. We'll also run into trouble later when subproject columns may appear on the board, and a user could want to put a task in different positions on different subprojects, conceivably.
In the "Natural" order view, we already have what is probably a generally better approach for this: a task display order particular to the column, that just remembers where you put the sticky notes.
Move away from "subpriority", and toward a world where we mostly keep sticky notes where you stuck them and move them around only when we have to. With no grouping, we still sort by "natural" order, as before. With priority grouping, we now sort by `<priority, natural>`. When you drag stuff around inside a priority group, we update the natural order.
This means that moving cards around on a "priority" board will also move them around on a "natural" board, at least somewhat. I think this is okay. If it's not intuitive, we could give every ordering its own separate "natural" view, so we remember where you stuck stuff on the "priority" board but that doesn't affect the "Natural" board. But I suspect we won't need to.
Test Plan:
- Viewed and dragged a natural board.
- Viewed and dragged a priority board.
- Dragged within and between groups of 0, 1, and multiple items.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20265
Summary:
Ref T13074. Today, in normal task list views in Maniphest (not workboards), you can (sometimes) reorder tasks if the view is priority-sorted.
I suspect no one ever does this, few users know it's supported, and that it was basically rendered obsolete the day we shipped workboards.
This also means that we need to maintain a global "subpriority" for tasks, which distinguishes between different tasks at the same priority level (e.g., "High") and maintains a consistent ordering on workboards.
As we move toward making workboards more flexible (e.g., group by author / owner / custom fields), I'd like to try moving away from "subpriority" and possibly removing it entirely, in favor of "natural order", which basically means "we kind of remember where you put the card and it works a bit like a sticky note".
Currently, the "natural order" and "subpriority" systems are sort of similar but also sort of in conflict, and the "subpriority" system can't really be extended while the "natural order / column position" system can.
The only real reason to have a global "subpriority" is to support the list-view drag-and-drop.
It's possible I'm wrong about this and a bunch of users love this feature, but we can re-evaluate if we get feedback in this vein.
(This just removes UI, the actual subpriority system is still intact and still used on workboards.)
Test Plan: Viewed task lists, was no longer able to drag stuff. Grepped for affected symbols. Dragged stuff in remaining grippable lists, like "Edit Forms" in EditEngine config.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20263
Summary:
Ref T10333. Ref T8135. Depends on D20247. Allow users to drag-and-drop cards on a priority-sorted workboard under headers, even if the header has no other cards.
As of D20247, headers show up but they aren't really interactive. Now, you can drag cards directly underneath a header (instead of only between other cards). For example, if a column has only one "Wishlist" task, you may drag it under the "High", "Normal", or "Low" priority headers to select a specific priority.
(Some of this code still feels a little rough, but I think it will generalize once other types of sorting are available.)
Test Plan: Dragged cards within and between priority groups, saw appropriate priority edits applied in every case I could come up with.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333, T8135
Differential Revision: https://secure.phabricator.com/D20248
Summary:
Ref T10333. When workboards are ordered (for example, by priority), add headers to the various groups. Major goals are:
- Allow users to drag-and-drop to set values that no cards currently have: for example, you can change a card priority to "normal" by dragging it under the "normal" header, even if no other cards in the column are currently "Normal".
- Make future orderings more useful, particularly "order by assignee". We don't really have room to put the username on every card and it would create a fair amount of clutter, but we can put usernames in these headers and then reference them with just the profile picture. This also allows you to assign to users who are not currently assigned anything in a given column.
- Make the drag-and-drop behavior more obvious by showing what it will do more clearly (see T8135).
- Make things a little easier to scan in general: because space on cards is limited, some information isn't conveyed very clearly (for example, priority information is currently conveyed //only// through color, which can be hard to pick out visually and is probably not functional for users who need vision accommodations).
- Maybe do "swimlanes": this is pretty much a "swimlanes" UI if we add whitespace at the bottom of each group so that the headers line up across all the columns (e.g., "Normal" is at the same y-axis position in every column as you scroll down the page). Not sold on this being useful, but it's just a UI adjustment if we do want to try it.
NOTE: This only makes these headers work for display.
They aren't yet recognized as targets by the drag list UI, so you can't drag cards into an empty group. I'll tackle that in a followup.
Test Plan: {F6257686}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20247
Summary:
Ref T10334. Partly, this just improves visual feedback for all drag operations. After D20242, we can have cases where you (for example) drag a low-priority node to a very tall column on a priority-ordered workboard. In this case, the actual dashed-border-drop-target may not be on screen.
We might make the column scroll or put some kind of hint in the UI in this case, but an easy starting point is just to make the "yes, you're targeting this column" state a bit more clear.
Test Plan: Dragged tasks between columns, saw the border higlight on the target columns. This is very tricky to take a screenshot of.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10334
Differential Revision: https://secure.phabricator.com/D20245
Summary:
Ref T10334. When a workboard is ordered by priority, dragging from column "A" to a particular place in column "B" currently means "move this task to column B, and adjust its priority so that it naturally sorts into the location under my mouse cursor".
Users frequently find this confusing / undesirable.
To begin improving this, make "drag from column A to column B" and "drag from somewhere in column A to somewhere else in column A" into different operations. The first operation, a movement between columns, no longer implies an ordering change. The second action still does.
So if you actually want to change the priority of a task, you drag it within its current column. If you just want to move it to a different column, you drag it between columns.
This creates some possible problems:
- Some users may love the current behavior and just not be very vocal about it. I doubt it, but presumably we'll hear from them if we break it.
- If you actualy want to move + reorder, it's a bit more cumbersome now. We could possibly add something like "shift + drag" for this if there's feedback.
- The new behavior is probably less surprising, but may not be much more obvious. Future changes (for example, in T10335) should help make it more clear.
- When you mouse cursor goes over column B, the card dashed-rectangle preview target thing jumps to the correct position in the column -- but that may not be under your mouse cursor. This feels pretty much fine if the whole column fits on screen. It may not be so great if the column does not fit on screen and the dashed-rectangle-thing has vanished. This is just a UI feedback issue and we could refine this later (scroll/highlight the column).
Test Plan:
- Created several tasks at different priority levels, sorted a board by priority, dragged tasks between columns. Dragging from "A" to "B" no longer causes a priority edit.
- Also, dragged within a column. This still performs priority edits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10334
Differential Revision: https://secure.phabricator.com/D20242
Summary:
Ref T12822. Ref PHI878. This is some leftover code from the old selection behavior that prevented visual selection of the left side of a diff if the user clicked on the right -- basically, a much simpler attack on what ultimately landed in D20191.
I think the change from `th` to `td` "broke" it so it didn't interfere with the other behavior, which is why I didn't have to remove it earlier. It's no longer necessary, in any case.
Test Plan: Grepped for behavior name, selected stuff on both sides of a diff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20196
Summary:
Ref T12822. Fixes a few things:
- Firefox selection of weird ranges with an inline between the start and end of the range now works correctly.
- "Show More Context" rows now render, highlight, and select properly.
- Prepares for nodes to have copy-text which is different from display-text.
- Don't do anything too fancy in 1-up/unified mode. We don't copy line numbers after the `content: attr(data-n)` change, but that's as far as we go, because trying to do more than that is kind of weird and not terribly intuitive.
Test Plan:
- Selected and copied weird ranges in Firefox.
- Kept an eye on "Show More Context" rows across select and copy operations.
- Generally poked around in Safari/Firefox/Chrome.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20192
Summary:
Ref T13161. Ref T12822. Today, we use invisible Zero-Width Spaces to try to improve copy/paste behavior from Differential.
After D20188, we no longer need ZWS characters to avoid copying line numbers. Get rid of these secret invisible semantic ZWS characters completely.
This means that both the left-hand and right-hand side of diffs become copyable, which isn't desired. I'll fix that with a hundred thousand lines of Javascript in the next change: this is a step toward everything working better, but doesn't fix everything yet.
Test Plan:
- Grepped for `zws`, `grep -i zero | grep -i width`.
- Copied text out of Differential: got both sides of the diff (not ideal).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20189
Summary:
Ref T13161. Ref T12822. See PHI870. Long ago, the web was simple. You could leave your doors unlocked, you knew all your neighbors, crime hadn't been invented yet, and `<th>3</th>` was a perfectly fine way to render a line number cell containing the number "3".
But times have changed!
- In PHI870, this isn't good for screenreaders. We can't do much about this, so switch to `<td>`.
- In D19349 / T13105 and elsewhere, this `::after { content: attr(data-n); }` approach seems like the least bad general-purpose approach for preventing line numbers from being copied. Although Differential needs even more magic beyond this in the two-up view, this is likely good enough for the one-up view, and is consistent with other views (paste, harbormaster logs, general source display) where this technique is sufficient on its own.
The chance this breaks //something// is pretty much 100%, but we've got a week to figure out what it breaks. I couldn't find any issues immediately.
Test Plan:
- Created, edited, deleted inlines in 1-up and 2-up views.
- Replied, keyboard-navigated, keyboard-replied, drag-selected, poked and prodded everything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20188
Summary:
Depends on D20181. Depends on D20182. Fixes T3498. Ref T13161. My claim, at least, is that D20181 can be tweaked to be good enough to throw away this "feature" completely.
I think this feature was sort of a mistake, where the ease of access to `diff -bw` shaped behavior a very long time ago and then the train just ran a long way down the tracks in the same direction.
Test Plan: Grepped for `whitespace`, deleted almost everything. Poked around the UI a bit. I'm expecting the whitespace changes to get some more iteration this week so I not being hugely pedantic about testing this stuff exhaustively.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T3498
Differential Revision: https://secure.phabricator.com/D20185
Summary: See PHI1017. This is a trivial fix even though these burnups are headed toward a grisly fate.
Test Plan: Moused over some January datapoints, saw "1" instead of "0".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19967
Summary:
Ref T13222. In D19918, I refactored how timelines get "view data". Today, this is always additional data about which images/changesets/diffs are visible on the current revision/commit/mock, so we can tell if inline comments should be linked to a `#anchor` on the same page (if the inline is rendered there somewhere) or to a `/D123?id=1&vs=2` full link on a different page (if it isn't), but in general this could be any sort of state information about the current page that affects how the timeline should render.
Previously, comment previews did not use any specialized object code and always rendered a "generic" timeline story. This was actually a bug, but none of the code we have today cares about this (since it's all inline related, and inlines render separately) so it never impacted anything.
After the `TimelineEngine` change, the preview renders with Differential-specific code. This is more correct, but we were not passing the preview the "view data" so it broke.
This preview doesn't actually need the view data and we could just make it bail out if it isn't present, but pass it through for consistency and so this works like we'd expect if we do something fancier with view data in the future.
Test Plan: Viewed comment and inline comment previews in Differential, saw old behavior restored.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19943
Summary:
Depends on D19914. Ref T11351. Some of the Phoilo rabbit holes go very deep.
`PhabricatorApplicationTransactionInterface` currently requires you to implement `willRenderTimeline()`. Almost every object just implements this as `return $timeline`; only Pholio, Diffusion, and Differential specialize it. In all cases, they are specializing it mostly to render inline comments.
The actual implementations are a bit of a weird mess and the way the data is threaded through the call stack is weird and not very modern.
Try to clean this up:
- Stop requiring `willRenderTimeline()` to be implemented.
- Stop requiring `getApplicationTransactionViewObject()` to be implemented (only the three above, plus Legalpad, implement this, and Legalpad's implementation is a no-op). These two methods are inherently pretty coupled for almost any reasonable thing you might want to do with the timeline.
- Simplify the handling of "renderdata" and call it "View Data". This is additional information about the current view of the transaction timeline that is required to render it correctly. This is only used in Differential, to decide if we can link an inline comment to an anchor on the same page or should link it to another page. We could perhaps do this on the client instead, but having this data doesn't seem inherently bad to me.
- If objects want to customize timeline rendering, they now implement `PhabricatorTimelineInterface` and provide a `TimelineEngine` which gets a nice formal stack.
This leaves a lot of empty `willRenderTimeline()` implementations hanging around. I'll remove these in the next change, it's just going to be deleting a couple dozen copies of an identical empty method implementation.
Test Plan:
- Viewed audits, revisions, and mocks with inline comments.
- Used "Show Older" to page a revision back in history (this is relevant for "View Data").
- Grepped for symbols: willRenderTimeline, getApplicationTransactionViewObject, Legalpad classes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11351
Differential Revision: https://secure.phabricator.com/D19918
Summary:
Ref T13216. See PHI985. When you click a line number to start an inline comment, we intend to initiate the action only if you used the left mouse button (desktop) or a touch (tablet/device).
We currently have a `not right` condition for doing this, but it only excludes right clicks, not middle clicks (or other nth-button clicks). The `not right` condition was sligthly easier to write, but use an `is left` condition instead of a `not right` condition.
Test Plan:
- In Safari, Firefox and Chrome:
- Used left click to start an inline.
- Used middle click to do nothing (previously: started an inline).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19836
Summary:
See PHI975. Ref T13216. Ref T2543. Previously, see D19204 and PHI433.
When you're acting on a draft revision, we change the button text to "Submit Quietly" as a hint that your actions don't generate notifications yet.
However, this isn't accurate when one of your actions is "Request Review", which causes the revision to publish.
Allow actions to override the submit button text, and make the "Request Review" action change the button text to "Publish Revision".
The alternative change I considered was to remove the word "Quietly" in all cases.
I'm not //thrilled// about how complex this change is to adjust one word, but the various pieces are all fairly clean individually. I'm not sure we'll ever be able to use it for anything else, but I do suspect that the word "Quietly" was the change in D19204 with the largest effect by far (see T10000).
Test Plan:
- Created a draft revision. Saw "Submit Quietly" text.
- Added a "Request Review" action, saw it change to "Publish Revision".
- Reloaded page, saw stack saved and "Publish Revision".
- Removed action, saw "Submit Quietly".
- Repeated on a non-draft revision, button stayed put as "Submit".
- Submitted the various actions, saw them have the desired effects.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216, T2543
Differential Revision: https://secure.phabricator.com/D19810
Summary:
See <https://hackerone.com/reports/434116>. Slowvote has a piece of Javascript that attempts to let you vote on `{V123}` polls inline.
It does not work: nothing ever triggers it (nothing renders a control with a `slowvote-option` sigil).
At least for now, just remove it. It has a completely separate pathway in the controller and both pathways are buggy, so this makes fixing them easier.
Test Plan: Voted in plurality and approval polls via Slowvote and the embedded widget.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19773
Summary: See PHI871. Ref T13197. These sections are only divided visually and don't have textual headers. Add aural headers.
Test Plan: {F5875471}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19654
Summary:
Depends on D19594. See PHI823. Ref T13164.
- Add a label for the "X" button in comment areas, like "Remove Action: Change Subscribers".
- Add a label for the floating header display options menu in Differential.
- Add `role="button"` to `PHUIButtonView` objects that we render with an `<a ...>` tag.
Test Plan:
Viewed a revision with `?__aural__=true`:
- Saw "Remove Action: ..." label.
- Saw "Display Options" label.
- Used inspector to verify that some `<a class="button" ...>` now have `<a class="button" role="button" ...>`. This isn't exhaustive, but at least improves things. A specific example is the "edit", "reply", etc., actions on inline comments.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19595
Summary:
Ref T13164. See PHI748. Path validation has a 750ms timeout which blames to rP5038ab850c, in 2011.
Production path validation is sometimes taking more than 750ms, particularly on the initial page load where we may validate many paths simultaneously.
I have no idea why we have this timeout, and it isn't consistent with how we perform other AJAX requests. Just remove it.
Test Plan:
- Reproduced issue in production, saw all validation calls failing at 750ms. Actual underlying calls succeed, they just take more than 750ms to resolve.
- Loaded path validator locally, got green checkmark.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19575
Summary:
Ref T13164. See PHI693. In Differential, you can {nav View Options > View Standalone} to get a standalone view of a single changeset. You can also arrive here via the big changeset list for revisions affecting a huge number of files.
We currently suggest that all the keyboard shortcuts work, but some do not. In particular, the "Next File" and "Previous File" keyboard shortcuts (and some similar shortcuts) do not work. In the main view, the next/previous files are on the same page. In the standalone view, we'd need to actually change the URI.
Ideally, we should do this (and, e.g., put prev/next links on the page). As a first step toward that, hide the nonfunctional shortcuts to stop users from being misled.
Test Plan:
- Viewed a revision in normal and standalone views.
- No changes in normal view, and all keys still work ("N", "P", etc).
- In standalone view, "?" no longer shows nonfunctional key commands.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19571
Summary: Ref T13151. See PHI616. There's a bug where the current banner changeset isn't cleared correctly when we hide the banner.
Test Plan:
- View revision with several changesets.
- Scroll down slowly through first changeset until banner appears.
- Scroll up until banner disappears.
- Scroll back down.
- Before: banner fails to reappear (code still thinks it's visible and we don't want to update it).
- After: banner reappears correctly.
Reviewers: amckinley, jmeador
Reviewed By: jmeador
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19474
Summary:
See PHI604. Ref T13130. Ref T13105. There's currently no way to turn blame off in Diffusion. Add a "Hide Blame" option to the "View Options" dropdown so it can be toggled off.
Also fix a couple of bugs around this: for example, if you loaded a Jupyter notebook and then switched to "Source" view, blame would incorrectly fail to activate because the original rendering of the "stage" used an asynchronous engine so `willRenderRef()` wasn't called to populate blame.
Test Plan:
- Viewed a source file, toggled blame off/on, reloaded page to see state stick in URL.
- Viewed a Jupyter notebook, toggled to "Source" view, saw blame.
- Viewed stuff in Files (no blame UI options).
- Tried to do some invalid stuff like toggle blame on a non-blame engine (options disable properly).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130, T13105
Differential Revision: https://secure.phabricator.com/D19414
Summary:
Ref T13130. See PHI617.
The new build log UI has tags like `<a href="...">Show More Above <span icon>^</span></a>`. If you click the little "^" icon, the event target is the `<span />` instead of the `<a />` so we expand on the wrong node.
Instead, select the `<a />` by sigil explicitly.
Test Plan: Viewed new log UI in Harbormaster, clicked "^" icon and text, got the same (correct) behavior on both.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19410
Summary:
Depends on D19377. Ref T13125. Ref T13124. Ref T13105. Coverage reporting in Diffusion didn't initially survive the transition to Document Engine; restore it.
This adds some tentative/theoretical support for multiple columns of coverage, but no way to actually produce them in the UI. For now, the labels, codes, and colors are hard coded.
Test Plan:
Added coverage with `diffusion.updatecoverage`, saw coverage in the UI:
{F5525542}
Hovered over coverage, got labels and highlighting.
Double-checked labels for "N" (Not Executable) and "U" (Uncovered). See PHI577.
Faked some multi-column coverage, but you can't currently get this yourself today:
{F5525544}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13125, T13124, T13105
Differential Revision: https://secure.phabricator.com/D19378
Summary: Ref T13105. After moving Diffusion to DocumnentEngine, this no longer has callers. It will become part of the document behavior.
Test Plan: Grepped for calls to the `diffusion-browse-file` behavior, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19377
Summary:
Depends on D19349. Ref T13105. This was the behavior in Diffusion before with a little hard-coded snippet.
Remove that snippet ("diffusion-jump-to") and add a more general-purpose snippet to SourceView.
This is a tiny bit hacky still (and probably doesn't work quite right with Quicksand) but gets things working again and works in all of Files, Paste, and Diffusion.
Test Plan: Followed links to particular lines in Paste, Files and Diffusion; got scrolled to the right place.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19350
Summary:
Depends on D19313. Ref T13105. Fixes T13015. We lost the coloration for ages in the switch to Document Engine.
Restore it, and use a wider range of colors to make the information more clear.
Test Plan: Viewed some blame, saw a nice explosion of bright colors. This is a cornerstone of good design.
Maniphest Tasks: T13105, T13015
Differential Revision: https://secure.phabricator.com/D19314
Summary:
Depends on D19312. Ref T13105. For readability, render only one link for each contiguous block of changes.
Also make the actual rendering logic a little more defensible.
Test Plan: Viewed some files with blame, saw one render per chunk instead of one per line.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19313
Summary: Depends on D19311. Ref T13105. Currently, blame only renders on the initial request. Instead, redraw blame after swapping views.
Test Plan: Swapped from "Source -> Hexdump -> Source" and "Hexdump -> Source". Saw blame on source in all cases.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19312
Summary: Ref T13105. This needs refinement but blame sort of works again, now.
Test Plan: Viewed files in Diffusion and Files; saw blame in Diffusion when viewing in source mode.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19309
Summary: Ref T13105. Ref T13047. This makes symbol indexes work with DocumentEngine in Files, and restores support in Diffusion.
Test Plan: Command-clicked stuff, got taken to the symbol index with reasonable metadata in Diffusion, Differential and Files.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105, T13047
Differential Revision: https://secure.phabricator.com/D19307
Summary: Depends on D19273. Ref T13105. Adds "Change Text Encoding..." and "Highlight As..." options when rendering documents, and makes an effort to automatically detect and handle text encoding.
Test Plan:
- Uploaded a Shift-JIS file, saw it auto-detect as Shift-JIS.
- Converted files between encodings.
- Highlighted various things as "Rainbow", etc.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19274
Summary:
Depends on D19258. Ref T13105.
- When the default renderer is an Ajax renderer, don't replace the URI. For example, when viewing a Jupyter notebook, the URI should remain `/F123`, not instantly change to `/view/123/jupyter/`.
- Fix an issue where non-ajax renderers could fail to display the dropdown menu properly.
Test Plan:
- Viewed a Jupyter notebook, stayed on the same URI.
- Changed rendering, got different URIs.
- Viewed a JSON file and toggled renderers via dropdown.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19259
Summary:
Ref T13105. This adds various small client-side improvements to document rendering.
- In the menu, show which renderer is in use.
- Make linking to lines work.
- Make URIs persist information about which rendering engine is in use.
- Improve the UI feedback for transitions between document types.
- Load slower documents asynchronously by default.
- Discard irrelevant requests if you spam the view menu.
Test Plan: Loaded files, linked to lines, swapped between modes, copy/pasted URLs.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19256
Summary:
Depends on D19238. Ref T13105. Give document engines some reasonable automatic support for degrading gracefully when someone tries to hexdump a 100MB file or similar.
Also, make "Video" sort above "Audio" for files which could be rendered either way.
Test Plan: Viewed audio, video, image, and other files. Adjusted limits and saw full, partial, and fallback/error rendering.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19239
Summary: Depends on D19237. Ref T13105. This adds a (very basic) "Hexdump" engine (mostly just to have a second option to switch to) and a selector for choosing view modes.
Test Plan: Viewed some files, switched between audio/video/image/hexdump.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19238
Summary:
See <https://discourse.phabricator-community.org/t/desktop-only-notifications-mode-is-broken/1234>. Ref T13102. The "Desktop Only" mode for notifications currently shows both desktop and web notifications.
In fact, `JX.Notification` currently has no ability to render notifications as desktop-only. Make this work.
Note that many of the variables and parameters here, including `showAnyNotification`, `web_ready`, and `desktop_ready`, are named in an incorrect or misleading way. However, the new behavior appears to be correct.
Test Plan:
- Emitted test notifications in "No Notifications", "Web Only", "Web and Desktop", and "Desktop" modes.
- Saw appropriate notifications appear in the UI.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19233
Summary:
Ref T13102. An install has a custom rule for bridging JIRA references via Doorkeeper and would like to be able to render them as `JIRA-123` instead of `JIRA JIRA-123 Full JIRA title`.
I think it's reasonable to imagine future support upstream for `JIRA-123`, `{JIRA-123}`, and so on, although we do not support these today. We can take a small step toward eventual support by letting the rendering pipeline understand different view modes.
This adds an optional `name` (the default text rendered before we do the OAuth sync) and an optional `view`, which can be `short` or `full`.
Test Plan:
I tested this primarily with Asana, since it's less of a pain to set up than JIRA. The logic should be similar, hopefully.
I changed `DoorkeeperAsanaRemarkupRule` to specify `name` and `view`, e.g `'view' => (mt_rand(0, 1) ? 'short' : 'full')`. Then I made a bunch of Asana references in a comment and saw them randomly go short or long.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19215
Summary: Depends on D19190. Fixes T12590. Ref T13099. Replaces the barely-usable, gigantic, poorly ordered "<select />" control with a tokenizer. Attempts to fix various minor issues.
Test Plan:
- Edited paths: include/exclude paths, from different repositories, different actual paths.
- Used "Add New Path" to add rows, got repository selector prepopulated with last value.
- Used "remove".
- Used validation typeahead, got reasonable behaviors?
The error behavior if you delete the repository for a path is a little sketchy still, but roughly okay.
Maniphest Tasks: T13099, T12590
Differential Revision: https://secure.phabricator.com/D19191
Summary: Ref T12590. This is ancient code which was used to prefill `/trunk/tfb/www/` or similar at Facebook. I don't think it ever had a UI and no install has asked for this feature since 2011.
Test Plan: Grepped for affected symbols, edited paths in Owners.
Maniphest Tasks: T12590
Differential Revision: https://secure.phabricator.com/D19189
Summary:
Depends on D19183. Ref T11015. Currently, adding a trailing slash works great and omitting it mysteriously doesn't work.
Store a normalized version with an unconditional trailing slash for the lookup logic to operate on, and a separate display version which tracks what the user actually typed.
Test Plan:
- Entered "/src/main.c", "/src/main.c/", saw them de-duplicate.
- Entered "/src/main.c", saw it stay that way in the UI but appear as "/src/main.c/" internally.
- Added a rule for "/src/applications/owners" (no slash), created a revision touching paths in that directory, saw Owners fire for it.
- Changed the display value of a path only ("/src/main.c" to "/src/main.c/"), saw the update reflected in the UI without any beahvioral change.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19184
Summary:
Depends on D19166. Ref T13088. When the user scrolls away from a followed log, break the focus lock.
Let users stop following a live log.
Show when lines are added more clearly.
Don't refresh quite as quickly give users a better shot at clicking the stop button.
These behaviors can probably be refined but are at least more plausible and less actively user-hostile than the first version of this behavior was.
Test Plan: Used `write-log --rate` to write a large log slowly. Clicked "Follow Log", followed for a bit. Scrolled away, still got live updates but no more scroll lock. Clicked stop, no more updates.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19167
