Summary:
Depends on D19154. Ref T13094. This controller was removed at some point and this route no longer works.
I plan to add a new `download/` route to let us tighten the `form-action` Content Security Policy.
Test Plan: Grepped for the route and controller, no hits.
Maniphest Tasks: T13094
Differential Revision: https://secure.phabricator.com/D19155
Summary: See PHI399. Ref T4340. We don't require Flash/Java anywhere and can safely block them unconditionally in the Content-Security-Policy header.
Test Plan: Added a `<object ... />` tag to a page, saw "Blocked Plug-In" and a CSP warning in the browser console.
Maniphest Tasks: T4340
Differential Revision: https://secure.phabricator.com/D19154
Summary: Depends on D19152. Ref T13088. This adds live log tailing. It is probably not the final version of this feature because it prevents escape once you begin tailing a log.
Test Plan: Used `bin/harbormaster write-log --rate ...` to write a log slowly. Viewed it in the web UI. Clicked "Follow Log". Followed the log until the write finished, a lifetime later.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19153
Summary: Depends on D19151. Ref T13088. While dramatically less exciting than using `lolcat` and less general than `pv`, this should do the job adequately.
Test Plan: Piped a sizable log into `bin/harbormaster write-log` with `--rate 2048`, saw a progress bar. Loaded the log in the web UI and saw it grow as the page reloaded.
Reviewers: yelirekim
Reviewed By: yelirekim
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19152
Summary:
Depends on D19150. Ref T13088. Allow clients to retrieve information about build logs, including log data, over the API.
(To fetch log data, take the `filePHID` to `file.search`, then issue a normal GET against the URI. Use a `Content-Range` header to get part of the log.)
Test Plan: Ran `harbormaster.log.search`, got sensible-looking results.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19151
Summary: Depends on D19149. Ref T13088. Since the new log requires a bunch of log reprocessing, the cutover is going to require at least some time for installs to run migrations. Add a link in the UI to ease the transition, smooth over some behaviors a little, and fix a fetch issue where we'd request past the end of the log (since this is now enforced).
Test Plan: Viewed a traditional Harbormaster build, saw links to the new standalone log pages.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19150
Summary: Depends on D19148. Ref T13088. The new rendering always executes range requests for data it needs, and we can satisfy these requests by loading the smallest number of chunks which span that range.
Test Plan: Piped 50,000 lines of Apache log into Harbormaster, viewed it in the new UI, got sensible rendering times and a reasonable amount of data actually going over the wire.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19149
Summary: Ref T13088. This variable bled through from an earlier loop and caused us to drop some of the lines in the middle.
Test Plan: Clicked "Show More", got an equal number of header and footer lines.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19148
Summary: Ref T13093. Depends on D19145. See PHI398. Previously, see D18933. This provides the current viewer to `ConduitCall` so that we don't try to use device credentials from unprivileged web hosts.
Test Plan: Evaluated the "Branches" field locally, saw an appropriate field value.
Maniphest Tasks: T13093
Differential Revision: https://secure.phabricator.com/D19146
Summary:
Ref T13093. See PHI396. These are possibly somewhat niche, but reasonable to support and consistent with the existing "Pusher's projects".
Also relabel "Pusher's projects" and "Project tags" for consistency and, hopefully, clarity.
Test Plan:
- Created new "commit" and "hook: commit content" Herald rules which run against "Author's projects" and "Committer's projects".
- Test console'd the "Commit" rules.
- Pushed through the "Hook" rule.
- In all cases, saw fields populate appropriately.
Maniphest Tasks: T13093
Differential Revision: https://secure.phabricator.com/D19145
Summary:
Ref T4340. Some browsers respect this header and referrers are a plague upon the earth.
Also, upgrade "never" to the more modern value "no-referrer".
Test Plan:
In Safari, Firefox and Chrome, disabled `rel="noreferrer"` on links and generated a normal link to an external site. Then clicked it and checked if a referrer was sent.
- Safari respects meta only, but "no-referrer" is fine.
- Firefox respects both (either the header or meta tag are individually sufficient to stop referrers).
- Chrome respects both (same as Firefox).
Maniphest Tasks: T4340
Differential Revision: https://secure.phabricator.com/D19144
Summary:
See PHI399. Ref T4340. This header provides an additional layer of protection against various attacks, including XSS attacks which embed inline `<script ...>` or `onhover="..."` content into the document.
**style-src**: The "unsafe-inline" directive affects both `style="..."` and `<style>`. We use a lot of `style="..."`, some very legitimately, so we can't realistically get away from this any time soon. We only use one `<style>` (for monospaced font preferences) but can't disable `<style>` without disabling `style="..."`.
**img-src**: We use "data:" URIs to inline small images into CSS, and there's a significant performance benefit from doing this. There doesn't seem to be a way to allow "data" URIs in CSS without allowing them in the document itself.
**script-src** and **frame-src**: For a small number of flows (Recaptcha, Stripe) we embed external javascript, some of which embeds child elements (or additional resources) into the document. We now whitelist these narrowly on the respective pages.
This won't work with Quicksand, so I've blacklisted it for now.
**connect-src**: We need to include `'self'` for AJAX to work, and any websocket URIs.
**Clickjacking**: We now have three layers of protection:
- X-Frame-Options: works in older browsers.
- `frame-ancestors 'none'`: does the same thing.
- Explicit framebust in JX.Stratcom after initialization: works in ancient IE.
We could probably drop the explicit framebust but it wasn't difficult to retain.
**script tags**: We previously used an inline `<script>` tag to start Javelin. I've moved this to `<data data-javelin-init ...>` tags, which seems to work properly.
**`__DEV__`**: We previously used an inline `<script>` tag to set the `__DEV__` mode flag. I tried using the "initialization" tags for this, but they fire too late. I moved it to `<html data-developer-mode="1">`, which seems OK everywhere.
**CSP Scope**: Only the CSP header on the original request appears to matter -- you can't refine the scope by emitting headers on CSS/JS. To reduce confusion, I disabled the headers on those response types. More headers could be disabled, although we're likely already deep in the land of diminishing returns.
**Initialization**: The initialization sequence has changed slightly. Previously, we waited for the <script> in bottom of the document to evaluate. Now, we go fishing for tags when domcontentready fires.
Test Plan:
- Browsed around in Firefox, Safari and Chrome looking for console warnings. Interacted with various Javascript behaviors. Enabled Quicksand.
- Disabled all the framebusting, launched a clickjacking attack, verified that each layer of protection is individually effective.
- Verified that the XHProf iframe in Darkconsole and the PHPAST frame layout work properly.
- Enabled notifications, verified no complaints about connecting to Aphlict.
- Hit `__DEV__` mode warnings based on the new data attribute.
- Tried to do sketchy stuff with `data:` URIs and SVGs. This works but doesn't seem to be able to do anything dangerous.
- Went through the Stripe and Recaptcha workflows.
- Dumped and examined the CSP headers with `curl`, etc.
- Added a raw <script> tag to a page (as though I'd found an XSS attack), verified it was no longer executed.
Maniphest Tasks: T4340
Differential Revision: https://secure.phabricator.com/D19143
Summary:
Depends on D19141. Ref T13088. Some of the fundamental log behaviors like "loading the correct rows" are now a bit better behaved.
The UI is a little less garbage, too.
Test Plan: Viewed some logs and loaded more context by clicking the buttons.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19142
Summary: Depends on D19139. Ref T13088. This doesn't actually work, but is close enough that a skilled attacker might be able to briefly deceive a small child.
Test Plan:
- Viewed some very small logs under very controlled conditions, saw content.
- Larger logs vaguely do something resembling working correctly.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19141
Summary:
Depends on D19138. Ref T13088. When we want to read the last part of a logfile //and show accurate line numbers//, we need to be able to get from byte offsets to line numbers somehow.
Our fundamental unit must remain byte offsets, because a test can emit an arbitrarily long line, and we should accommodate it cleanly if a test emits 2GB of the letter "A".
To support going from byte offsets to line numbers, compute a map with periodic line markers throughout the offsets of the file. From here, we can figure out the line numbers for arbitrary positions in the file with only a constant amount of work.
Test Plan: Added unit tests; ran unit tests.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19139
Summary: Depends on D19137. Ref T13088. This allows `rebuild-log` to skip work if the chunks are already compressed. It also prepares for a future GC which is looking for "text" or "gzip" chunks to throw away in favor of archival into Files; such a GC can use this column to find collectable logs and then write "file" to it, meaning "chunks are gone, this data is only available in Files".
Test Plan: Ran migration, saw logs populate as "text". Ran `rebuild-log`, saw logs rebuild as "gzip".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19138
Summary: Depends on D19136. Ref T13088. Since it's probably impractical to do all the migrations these changes imply during `bin/storage upgrade`, provide some support for performing them online.
Test Plan: Ran `bin/harbormaster rebuild-log` with `--all`, `--id`, and with and without `--force`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19137
Summary: Depends on D19135. Ref T13088. Denormalize the total log size onto the log itself. This makes reasoning about the log at display time easier, and we don't need to fish around in the database as much to figure out what we're dealing with.
Test Plan: Ran `bin/harbormaster rebuild-log`, saw an existing log populate. Ran `bin/harbormaster write-log`, saw new log write with proper length information.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19136
Summary:
Depends on D19134. Ref T13088. Future changes will support API writers, so push the log lock into the Log object.
Allow open/close ("this process is writing to this log") to be separate from live/final ("this log is still generating more data").
Test Plan: Wrote logs with `bin/harbormater write-log` and updated logs with `bin/harbormaster rebuild-log`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19135
Summary: Depends on D19133. Ref T13088. Allows build logs to be formally destroyed, cleaning up their chunks and file data.
Test Plan:
- Used `bin/remove destroy` to destroy a log, verified chunks and files were removed.
- Used `bin/harbormaster rebuild-log` to force a log to rebuild, verified files were destroyed and regenerated.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19134
Summary: Depends on D19132. Ref T13088. This implements an extremely skeletal dedicated log page with a more-or-less functional "Download Log" button.
Test Plan: Downloaded a recent log. Tried to download an old (un-finalized) log, couldn't. Used `bin/harbormaster write-log` to get a convenient standalone link to a log.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19133
Summary: Depends on D19131. Ref T13088. During log finalization, stream the log into Files to support "Download Log", archive to Files, and API access.
Test Plan: Ran `write-log` and `rebuild-log`, saw Files objects generate with log content and appropriate permissions.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19132
Summary: Depends on D19130. Ref T13088. Currently, when a build log is closed we compress it in the same process. Separate this out into a dedicated worker since the plan is to do a lot more work during finalization, none of which needs to happen inline during builds (or, particuarly, inline during a Conduit call for API writes in the future).
Test Plan: Ran `bin/harbormaster write-log --trace`, saw compression run inline.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19131
Summary: Ref T13088. This is currently minimal but the modify-execute development loop on build logs is extremely long without it.
Test Plan: Ran `echo hi | ./bin/harbormaster write-log --target 12345`, saw the log show up in the web UI.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19130
Summary:
PHP 7.2 has changed the behavior of `count`, you must provide an array or `Countable` as a parameter, otherwise a warning is generated. These two class members are counted during rendering, and are commonly left as null properties.
https://wiki.php.net/rfc/counting_non_countables
Test Plan: Browsed around my install and stopped seeing `count(): Parameter must be an array or an object that implements Countable at [AphrontTableView.php:153]` everywhere.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D19140
Summary:
Ref T13090. The default width changed recently to become much wider, but the behavior on this control isn't great. Instead:
- Pick a default width somewhere between the two.
- Make the width sticky across show/hide (pressing "f" twice remembers your width instead of resetting it).
- Make the width sticky across reloads (dragging the bar, then reloading the page keeps the bar in the same place).
Test Plan:
- Without settings, loaded page: got medium-width bar.
- Dragged bar wide/narrow, toggled on/off with "f", got persistent width.
- Dragged bar wide/narrow, reloaded page, got persistent width.
- Dragged bar wide/narrow, toggled it off, reloaded page, toggled it on, got persistent width.
Maniphest Tasks: T13090
Differential Revision: https://secure.phabricator.com/D19129
Summary: Ref T13090. The doc string in "any()" wasn't specified correctly and the help page wasn't getting enough supporting data to build properly.
Test Plan: Viewed "Reference: Advanced Functions" for a custom datasource field and got more helpful help.
Maniphest Tasks: T13090
Differential Revision: https://secure.phabricator.com/D19128
Summary: Depends on D19126. Ref T13090. For datasource custom fields, this proxies the datasource and provides "none()" and "any()" functions to allow you to search for objects with no values or any values.
Test Plan:
- Created a custom "Owning Group" field in Maniphest using a Projects datasource.
- For a task with no owner assigned, searched for "none()" (hit) and "any()" (miss).
- Assigned the task to an owning project.
- Searched for "none()" (miss), "any()" (hit), the project it is now a member of (hit) and some random other project (miss).
Maniphest Tasks: T13090
Differential Revision: https://secure.phabricator.com/D19127
Summary: Ref T13090. Currently, it isn't possible to query custom fields for complex constraints. Lay the groundwork to implement some of the easy ones (none(), any()) for Datasource/PHID fields.
Test Plan: Hard-coded some constraints and queried with them; see next change for more substantial testing.
Maniphest Tasks: T13090
Differential Revision: https://secure.phabricator.com/D19126
Summary: Ref T13090. Ref T13077. This adds `parentPaths` and `ancestorPaths` constraints to `phriction.document.query`. These should be a little more usable than the internal `slugPrefix` / `depth` stuff -- that's technically more powerful, but requires callers to know more slug normalization rules. We could perhaps expose `minDepth` / `maxDepth` in the future.
Test Plan: Ran valid and invalid `parentPaths` and `ancestorPaths` queries for `/`, `aaa/`, `AAA/`, etc. Got sensible-seeming results.
Maniphest Tasks: T13090, T13077
Differential Revision: https://secure.phabricator.com/D19125
Summary:
Fixes T13087. Ref T13090. An install ran into a situation where mail was being double-delivered, and it wasn't immediately clear where in the pipeline the issue lay.
This change adds some headers which should rule out (or, at least, render very unlikely) some possible causes if we encounter similar issues in the future.
The `X-Phabricator-Mail-ID` header stores the ID of the `MetaMTAMail` storage object so we can distinguish between two messages sent to two different targets and one message which may have been split or re-sent. It also makes it easier to know what to `bin/mail show-outbound --id <id>` and where to find the message in the web UI for additional information.
The `X-Phabricator-Send-Attempt` is a unique value per attempt. If two mail messages are delivered with the same attempt value, the split is probably downstream from Phabricator. If they have different attempt values, the split is probably in Phabricator.
(In this case, the split was somewhere downstream from us, since sending mail with `/usr/bin/mail` also resulted in duplicates.)
Test Plan: Send some mail, inspected it with `bin/mail show-outbound --id <id>`, saw new headers with sensible/expected values.
Maniphest Tasks: T13090, T13087
Differential Revision: https://secure.phabricator.com/D19124
Summary:
See PHI385. Ref T13054. Ref T13083. The dashboard "arrange" operations (add, remove, move) rely on doing `$dashboard->setThing(...)` and then applying transactions.
This no longer works after the read locking change from T13054. To make this function again, just add an explicit `save()` after layout adjustment. This should be more nuanced eventually, but all arrange operations are nonfunctional in a corrupting way at HEAD of `master`/`stable`, so stop the bleeding first.
Test Plan:
- Created new empty and template dashboards.
- Moved panels.
- Added new and existing panels.
- Removed panels.
Maniphest Tasks: T13083, T13054
Differential Revision: https://secure.phabricator.com/D19123
Summary:
Depends on D19121. Ref T13083. Group transactions and show groups in the debugging view.
Fix some of the most obvious issues with fact generation:
- No more 0-point facts.
- Engine can now generate at least one of every type of fact.
Test Plan: Generated facts, viewed them in the debugging view, fact generation largely appeared to align with reality. No more "no facts in storage" facts.
Subscribers: yelirekim
Maniphest Tasks: T13083
Differential Revision: https://secure.phabricator.com/D19122
Summary:
Depends on D19120. Ref T13083. When you write a fact engine, it's currently somewhat difficult to figure out exactly what it's doing. It would also be difficult to diagnose bugs or report them to the upstream.
To ease this, add a page which shows all the facts an object generates. This allows you to iterate on an engine quickly without needing to reanalyze facts, take a screenshot, easily compare the timeline to the fact view, etc.
Test Plan: Viewed the object fact page for several objects.
Subscribers: yelirekim
Maniphest Tasks: T13083
Differential Revision: https://secure.phabricator.com/D19121
Summary:
Depends on D19119. Ref T13083. This is probably still very buggy, but I'm planning to build support tools to make debugging facts easier shortly.
This generates a large number of datapoints, at least, and can render some charts which aren't all completely broken in an obvious way.
Test Plan: Ran `bin/fact analyze --all`, got some charts with lines that went up and down in the web UI.
Subscribers: yelirekim
Maniphest Tasks: T13083
Differential Revision: https://secure.phabricator.com/D19120
Summary:
Ref T13083. Facts has a fair amount of weird hardcoding and duplication of responsibilities. Reduce this somewhat: no more hard-coded fact aggregates, no more database-driven list of available facts, etc. Generally, derive all objective truth from FactEngines. This is more similar to how most other modern applications work.
For clarity, hopefully: rename "FactSpec" to "Fact". Rename "RawFact" to "Datapoint".
Split the fairly optimistic "RawFact" table into an "IntDatapoint" table with less stuff in it, then dimension tables for the object PHIDs and key names. This is primarily aimed at reducing the row size of each datapoint. At the time I originally wrote this code we hadn't experimented much with storing similar data in multiple tables, but this is now more common and has worked well elsewhere (CustomFields, Edges, Ferret) so I don't anticipate this causing issues. If we need more complex or multidimension/multivalue tables later we can accommodate them. The queries a single table supports (like "all facts of all kinds in some time window") don't make any sense as far as I can tell and could likely be UNION ALL'd anyway.
Remove all the aggregation stuff for now, it's not really clear to me what this should look like.
Test Plan: Ran `bin/fact analyze` and viewed web UI. Nothing exploded too violently.
Subscribers: yelirekim
Maniphest Tasks: T13083
Differential Revision: https://secure.phabricator.com/D19119
Summary: See D19117. Instead of automatically figuring this out inside `phutil_tag()`, explicitly add rel="noreferrer" at the application level to all external links.
Test Plan:
- Grepped for `_blank`, `isValidRemoteURIForLink`, checked all callsites for user-controlled data.
- Created a link menu item, verified noreferrer in markup.
- Created a link custom field, verified no referrer in markup.
- Verified noreferrer for `{nav href=...}`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19118
Summary: Ref T13077. The context object wasn't being passed into the engine properly here, affecting relative link rendering in Phriction.
Test Plan: Viewed rendered Phriction documents with relative links, got clean renders.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19115
Summary: Ref T13077. This content extraction rule wasn't right and caused rendering on Phriction pages to extract context improperly.
Test Plan: Viewed pages in Phriction with relative links to other documents.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19114
Summary: Ref T13077. Freeze "phriction.info" in favor of the more modern "phriction.document.search".
Test Plan: Reviewed older method in web UI, saw frozen markers.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19113
Summary: Ref T13077. Adds a "paths" constraint to the API query.
Test Plan: Used paths constraint to fetch documents.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19112
Summary:
Ref T13077. The autosuggester is a little too eager right now, and will eat carriage returns after typing `[` if you never activate the tokenizer.
To fix this, try just canceling sooner. If that doesn't work, we might need to cancel more eagerly by testing to see if the tokenizer is actually open.
Test Plan: Typed `[x]<return>`, got my return instead of getting trapped by the autosuggester.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19110
Summary: Depends on D19107. Ref T13077. The underlying datasource may need some adjustment but this appears to work properly locally.
Test Plan: Typed `[[ por` locally, was suggested "Porcupine Facts". Typed `[[ / ]]`, saw it render as a reference to the wiki root instead of the install root.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19108
Summary:
Depends on D19106. Fixes T5941. Ref T13077. Allows you to find Phriction documents as suggestions from global quick search.
Also supports `w` to jump to Phriction and `w query` to query Phriction.
The actual query logic for the datasource may need some tweaking after it collides with reality, but seems to produce fairly reasonable results in local testing against synthetic data.
Test Plan: Searched for "Porcupine Facts", "Travel Companions", and other useful local pages. Searched for `w`. Searched for `w zebra facts`.
Maniphest Tasks: T13077, T5941
Differential Revision: https://secure.phabricator.com/D19107
Summary:
Depends on D19105. Ref T13077. Fixes T12344.
The `[[ ... ]]` syntax accepts and handles characters which would require URL encoding if they appeared in URIs. For example, `[[ 100% Natural Cheese Dust ]]` is a legitimate, supported piece of remarkup syntax, and does not need to be written as `... 100%25 Natural ...`.
Likewise, `[[ BUY $DOGE ]]` is legitimate and does not need to be written as `[[ BUY %24DOGE ]]`. This piece of syntax creates a link to `/w/buy_$doge/`. This may or may not appear in your browser's URL bar as `/w/buy_%24doge/`, but internally "$" is a valid slug character and you'll see `buy_$doge` over Conduit, etc.
However, since users may reasonably copy paths from their browser URL bar, they may have unnecessary URL encoding. The syntax `[[ buy_$doge ]]` is legitimate, but a user copy/pasting may write `[[ buy_%24doge ]]` instead.
Currently, this extra URL encoding causes links to break, since `[[ buy_%24doge ]]` is a treated as link to `/w/buy_24doge/`, just like `[[ Fresh 100%AB Blood ]]` is a link to `/w/fresh_100_ab_blood/`.
To fix this:
- When the target for a link can be URL decoded, try to do lookups on both the un-decoded and decoded variations.
- If the un-decoded variation works, great: use it. This preserves behavior for all existing, working links.
- If the un-decoded variation fails but the decoded variation works, okay: we'll assume you copy-pasted a URL-encoded version and strip URL encoding.
- If both fail, same behavior as before.
Also, use a different spelling for "existent".
See T13084 for some "attacks" based on this behavior. I think the usability affordance this behavior provides greatly outweighs the very mild threat those attacks represent.
Test Plan:
- Created links to existing, nonexisting, and existing-but-not-visible documents, all of which worked normally.
- Created links to `[[ $doge ]]` and `[[ %24doge ]]`, saw them both go to the right place.
- Performed the "attacks" in T13084.
Maniphest Tasks: T13077, T12344
Differential Revision: https://secure.phabricator.com/D19106
Summary:
Fixes T10969. Ref T13077. When you create a Phriction document with a relative link (`[[ ./path/to/page ]]`) the initial email currently points to the wrong place.
This is because the context object (the page) isn't passed to the markup engine. Without this context, the relative link is rendered as though it appeared somewhere else (like a task or revision) where relative links don't make sense.
Test Plan: Created a new Phriction document with a relative link to `[[ ./porcupine_facts/starmap ]]`, saw a usable link in the resulting email.
Maniphest Tasks: T13077, T10969
Differential Revision: https://secure.phabricator.com/D19105
Summary:
See PHI370. Support the "Affected packages" and "Affected package owners" Herald fields in pre-commit hooks.
I believe there's no technical reason these fields aren't supported and this was just overlooked.
Test Plan: Wrote a rule which makes use of the new fields, pushed commits through it. Checked transcripts and saw sensible-looking values.
Differential Revision: https://secure.phabricator.com/D19104
