Summary: Fixes T12883. The task seems correct to me and I think this is a copy/paste mistake that probably blames to me.
Test Plan: Fiddled these numbers, viewed a build in Harbormaster, saw the adjusted time.
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12883
Differential Revision: https://secure.phabricator.com/D18177
Summary:
Fixes T12884. In cases other than this UI, applications access URIs through the Repository they're part of. This means that applications interact with URIs which have gone through the correction/adjustment logic in `PhabricatorRepository->attachURIs()`, which fixes up "builtin" URIs to have the right values based on configuration.
In this case (and, as far as I can tell, only this case) we load the URI directly //and// act on its properties which depend on configuration and repository state.
This can mean we're using a different view of the URI than we should be.
To fix this: after loading the URI, reload it through the repository so the relevant adjustments are applied.
I think this is the most reasonable fix. We could try to make `RepositoryURIQuery` somehow enforce this, but the cost of this error is small (mild confusion about display state), the other things which do direct loads don't depend on this state (editing), and everything else loads via a repository and is likely to continue doing that forever.
Test Plan: {F5026633}
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12884
Differential Revision: https://secure.phabricator.com/D18176
Summary:
When users use the web UI to enter text like "Reviewers: x" into the "Summary" or "Test Plan", we can end up with an ambiguous commit message.
Some time ago we added a warning about this to the "Summary" field, and //attempted// to add it to the "Test Plan" field, but it actually gets called from the wrong place.
Remove the code from the wrong place (no callers, not reachable) and put it in the right place.
This fixes an issue where users could edit a test plan from the web UI to add the text "Tests: ..." and cause ambiguities on a later "arc diff --edit".
Test Plan: {F5026603}
Reviewers: chad, amckinley
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18175
Summary: Ref T12845. Converts the cluster and project config options to the new stuff; this is mostly just shifting boilerplate around.
Test Plan: Edited, deleted, and mangled these options from the web UI and CLI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18166
Summary:
Fixes T12870. Ref T12845.
Technically, this addresses the core issue in T12845 too, but I'm going to convert the rest of the `custom:...` types before closing that.
In particular, for T12870:
- Validates that keywords are unique across priorities.
- Fixes missing newline in documentation.
- Updates documentation to note that keywords are now mandatory and must be unique across priorities.
Test Plan: Edited, deleted and mangled all the Maniphest custom options (priorities, statuses, points, subtypes).
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12870, T12845
Differential Revision: https://secure.phabricator.com/D18165
Summary:
Ref T12845. This is the last of the hard-coded types.
These are mostly used for values which users don't directly edit, so it's largely OK that they aren't carefully validated. In some cases, it would be good to introduce a separate validator eventually.
Test Plan: Edited, deleted and mangled these values via the web UI and CLI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18164
Summary: Ref T12845. This move 'set' options (a set of values).
Test Plan: Set, deleted and mangled 'set' options from CLI and web UI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18160
Summary: Ref T12845. These options prompt the user to select from among concrete subclasses of some base class.
Test Plan: Set, deleted and mangled these values from the web UI and CLI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18159
Summary: Ref T12845. This updates the "list<string>" and "list<regex>" options.
Test Plan: Set, deleted, and mangled options of these types from the web UI and CLI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18157
Summary: Ref T12845. This moves the "enum" and "string" types to the new code.
Test Plan: Set, deleted, and tried to set invalid values for various enum and string config values (header color, mail prefixes, etc) from the CLI and web.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18156
Summary:
Ref T12845. Config options are "modular", but the modularity is very old, half-implemented, and doesn't use modern patterns.
Half the types are hard-coded, while half the types are semi-modular but in a weird hacky way where you prefix the type with `custom:...`.
The actual API is also weird and requires types to return a lot of `array($stuff, $thing, $other_thing, $more_stuff)` sorts of tuples.
Instead:
- Add a new replacement layer which uses modern modularity patterns and overrides the older stuff if available, so we can migrate things one at a time.
- New layer uses a more modern API -- no `return array($thing, $other_thing, ...)`, and more modern building blocks (like AphrontHTTPParameterType).
- New layer allows custom types to be deleted, which will ultimately let us deal with T12845.
Then, convert the `'int'` type to use the new layer.
Test Plan:
- Set, edited, tried-to-change-in-an-invalid-way, and deleted an `'int'` option from the web UI.
- Same from the CLI.
- Edited `config.json` to have an invalid value, verified that the error was detected and config was repaired.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18155
Summary: Updates the builtin images, leaves the old choose... icons for now. I'd like to automate this based on icon when creating a project.
Test Plan: Visit edit picture page, pick a few. Purge cache, see new default image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18162
Summary: Ref T12872, turns off all these "helpful" fields.
Test Plan: Type "phab" in main search and do not get a suggestion for "phablet".
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12872
Differential Revision: https://secure.phabricator.com/D18163
Summary: This was accidentally caught in the crossfire in D18150. This is stable enough to formalize instead of adding with an event hook.
Test Plan: Looked at a candidate revision, saw "Land Revision" appear in UI again.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18154
Summary: This was accidentally caught in the crossfire in D18150. This is stable enough to formalize instead of adding with an event hook.
Test Plan: Looked at a candidate revision, saw "Land Revision" appear in UI again.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18154
Summary:
Ref T12871. This replaces a dead end UI (user totally locked out) with one where the menu is still available, if the default menu item is one which generates a policy exception (e.g., because users can't see the dashboard).
Really, we should do better than this and not select this item as the default item if the viewer can't see it, but there is currently no reliable way to test for "can the viewer see this item?" so this is a more involved change. I'm thinking we get this minor improvement into the release, then pursue a more detailed fix afterward.
Test Plan:
- Added a dashboard as the top item in the global menu.
- Changed the dashboard to be visible to only user B.
- Viewed Home as user A.
- Before patch: entire page is a policy exception dialog.
- After patch, things are better:
{F5014179}
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12871
Differential Revision: https://secure.phabricator.com/D18152
Summary:
Fixes T12851.
This should fix the error I'm seeing, which is:
* `Argument 1 passed to array_fuse() must be of the type array, boolean given`
There may be a better way to patch this up than overriding the getValue() method,
however.
Test Plan:
- Changed the default "Tags" filter to specify `true` instead of `array('self')`, then viewed that filter in the UI.
- Before patch: fatal.
- After patch: page loads. Note that `true` is not interpreted as `array('self')`, but the page isn't broken, which is a big improvement.
Reviewers: #blessed_reviewers, 20after4, chad, amckinley
Reviewed By: #blessed_reviewers, amckinley
Subscribers: Korvin
Maniphest Tasks: T12851
Differential Revision: https://secure.phabricator.com/D18132
Summary:
Fixes T12867. Also:
- Simplify the code a little.
- Stop mutating this on text/mobile -- there's no inherent value in the "youtu.be" link so I think this just changes the text the user wrote unnecessarily.
Test Plan: {F5013804}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12867
Differential Revision: https://secure.phabricator.com/D18149
Summary:
Fixes T12869. This is a very old, pre-Drydock chunk of code from D7486 and some followups.
It does three things:
- "Land to Hosted Git": Obsoleted by Drydock, has been commented out in HEAD for a very long time with no complaints. Disabled by D8719 in 2014.
- "Land to Hosted Mercurial": Could be obsoleted by Drydock with a fairly small amount of work, but currently has no replacement. Unclear if this sees any real use. Not actually disabled at HEAD.
- "Land to GitHub": Use GitHub OAuth credentials to land to GitHub. This is sort of theoretically useful and has no analog today. Disabled by D13022 in 2015.
This stuff was largely disabled a long time ago and we haven't seen users hitting issues with it. This could all be moved to an extension today if anyone still relies on it.
Test Plan: Grepped for removed classes, browsed Differential.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12869
Differential Revision: https://secure.phabricator.com/D18150
Summary: Builds out a responsive tab bar system for PHUITwoColumnView pages
Test Plan:
Tested at mobile, tablet, and desktop breakpoints
{F5012429}
{F5012430}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18148
Summary: Ref T12859. This is an older command with a lot of hard-coded flags. Modularize cache purging in a modern way so it can be extended.
Test Plan: Ran `bin/cache purge --trace` with various valid and invalid flags.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12859
Differential Revision: https://secure.phabricator.com/D18146
Summary: Fixes T12860. Some joins were being dropped because we didn't call `parent::...`
Test Plan:
- Tagged a document.
- Searched for documents with that tag.
- Before change: got all documents.
- After change: got only tagged documents.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12860
Differential Revision: https://secure.phabricator.com/D18145
Summary: Updated Files, no more AA issue.
Test Plan: look
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18144
Summary: Had some made, they seem better than my attempt.
Test Plan: review in sandbox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: avivey, Korvin
Maniphest Tasks: T12859
Differential Revision: https://secure.phabricator.com/D18143
Summary:
Ref T12124. After D18134 we accept either "25" or "low" via HTTP parameters and when the field renders as a control, but if the form has a default value for the field but locks or hides it we don't actually run through that logic.
Canonicalize both when rendering the control and when using a raw saved default value.
Test Plan:
- Created a form with "Priority: Low".
- Hid the "Priority" field.
- Before patch: Tried to create a task, was rebuffed with a (now verbose and helpful, after D18135) error.
- Applied patch: things worked.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12124
Differential Revision: https://secure.phabricator.com/D18142
Summary:
Ref T12857. This is generally fairly fuzzy for now, but here's something concrete: when we build a large file with `diffusion.filecontentquery`, we compute the MIME type of all chunks, not just the initial chunk.
Instead, pass a dummy MIME type to non-initial chunks so we don't try to compute them. This mirrors logic elsewhere, in `file.uploadchunk`. This should perhaps be centralized at some point, but it's a bit tricky since the file doesn't know that it's a chunk until later.
Also, clean up the `TempFile` immediately -- this shouldn't actually affect anything, but we don't need it to live any longer than this.
Test Plan:
- Made `hashFileContent()` return `null` to skip the chunk cache.
- Added `phlog()` to the MIME type computation.
- Loaded a 12MB file in Diffusion.
- Before patch: Saw 3x MIME type computations, one for each 4MB chunk.
- After patch: Saw 1x MIME type computation, for initial chunk only.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12857
Differential Revision: https://secure.phabricator.com/D18138
Summary:
Ref T12855. PHP7 introduced "Throwables", which are sort of like super exceptions. Some errors that PHP raises at runtime have become Throwables instead of old-school errors now.
The major effect this has is blank pages during development under PHP7 for certain classes of errors: they skip all the nice "show a pretty error" handlers and
This isn't a compelete fix, but catches the most common classes of unexpected Throwable and sends them through the normal machinery. Principally, it shows a nice stack trace again instead of a blank page for a larger class of typos and minor mistakes.
Test Plan:
Before: blank page. After:
{F5007979}
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12855
Differential Revision: https://secure.phabricator.com/D18136
Summary:
Ref T12124. This is a fairly narrow fix for existing saved EditEngine forms with a default priority value.
These saved forms have a numeric (or probably "string-numeric") default value, like "50". They lost their meaning after D18111, when "50" no longer appears in the dropdown. Instead, these forms all select the highest available priority.
At time of writing, this form was broken on this install, for example:
> https://secure.phabricator.com/transactions/editengine/maniphest.task/view/13/
Additionally, `/task/edit/form/123/?priority=...` (for templating forms) stopped working with `priority=50`. This isn't nearly as important, but a larger and more sudden compatiblity break than we need to make.
Add support for an "alias map" on `<select />` controls, so if the value comes in with something we don't recognize we'll treat it like some other value. Then alias all the numeric constants -- and other keywords -- to the right constants.
This ended up only affecting the `<select />` control in the web UI.
Test Plan:
- On `stable`, created a form with "Priority: Low".
- Before patch: form has "Priority: Unbreak Now!" on `master`.
- After patch: form has "Priority: Low" again.
- Used `?priority=25`, `?priority=wish`, `?priority=wishlist` to template forms: all forms worked.
Reviewers: amckinley, chad
Reviewed By: amckinley
Maniphest Tasks: T12124
Differential Revision: https://secure.phabricator.com/D18134
Summary:
Ref T12124. Currently, Conduit provides a fairly rough error message if you provide an invalid priority.
Instead, provide a more tailored message. Also, block `!!unknown!!` except from web edits.
Test Plan:
Before:
{F5007964}
After:
{F5007965}
Also, changed a priority to `999` in the database, edited it with the normal web UI form, it let me make the edit without being forced to adjust the priority.
Reviewers: amckinley, chad
Reviewed By: amckinley
Maniphest Tasks: T12124
Differential Revision: https://secure.phabricator.com/D18135
Summary: Fixes T12840. This adds a parallel "graph" button next to history on home and on the history list page. I'll think more about better placement of how to get to this page with the upcoming redesign that's still sitting in Pholio.
Test Plan: View History, View Graph, Try pager, go to a file, click view history, see no graph button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12840
Differential Revision: https://secure.phabricator.com/D18131
Summary: Fixes T12850, marks it hidden with zero width so the element still exists in the DOM
Test Plan: T12850 code, locally
Reviewers: epriestley, amckinley, avivey
Reviewed By: avivey
Subscribers: Korvin
Maniphest Tasks: T12850
Differential Revision: https://secure.phabricator.com/D18130
Summary:
Fixes T8909. Ref T12733.
UI attempts to follow the mock, but is a bit rough since PHUIXButtonView without text in this menu gets weird spacing, we don't have circular buttons yet, and PHUIXActionView without an icon also gets odd spacing.
Test Plan: {F5003125}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733, T8909
Differential Revision: https://secure.phabricator.com/D18128
Summary:
Ref T12733. When a revision has unsubmitted checkmarks:
- Color the banner yellow.
- Show them in the "X unsubmitted" count.
- Make the "X unsubmitted" button cycle between all drafts (written but unpublished comments) and "draft done" (checked but unsubmitted "Done" checkbox comments).
Test Plan:
- Checked a "Done" box, saw "1 unsubmitted" and yellow banner.
- Clicked "5 unsubmitted" repeatedly, saw it cycle through all unsubmitted comments and checkboxes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18127
Summary:
Ref T12733. This paves the way for a separate "hide" operation which completely hides things.
(I didn't extend this to the server side because that would require schema changes and the new "hide" state is client-only.)
Test Plan: Collapsed and expanded inlines, viewed tooltips.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18126
Summary: Fixes T12124. Changes `ManiphestEditEngine` to populate the select using priority keywords instead of the integer value. Marks `maniphest.querystatuses` as frozen. Adds a new Conduit method for fetching potential task statuses.
Test Plan: Created tasks and changed their priorities, observed that transactions in the DB still have the same type (integers as strings). Invoked `maniphest.update` with `priority => '90'` and observed that it still works. Invoked `maniphest.edit` with `priority => 'unbreak'` and observed that it now works.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T12124
Differential Revision: https://secure.phabricator.com/D18111
Summary:
Fixes T12844. This code is misleading: the daemon insert is happening on a different connection, and is not inside the transaction on the Mail connection.
What actually happens is this:
- (Connection A) `BEGIN`
- (Connection A) `INSERT INTO mail ...`
- (Connection B) `INSERT INTO worker ...` <-- This is a different connection, and it is NOT in a transaction!
- There's a race window here: the worker row is globally visible but the mail row is still isolated inside the transaction.
- (Connection A) `COMMIT`
- Now we're clear: the mail row is globally visible.
Change this code to reflect what's actually happening.
This means that if the worker row insert fails for some reason, we'll now throw with a mail row written to the database. But this is fine: it doesn't send on its own (so it can't cause mail loops or anything) and it can be re-queued with `bin/mail resend` if necessary without too much trouble.
Test Plan: See T12844 for particulars. Made some comments on tasks, saw the daemons send mail.
Reviewers: chad, amckinley, jmeador
Reviewed By: jmeador
Maniphest Tasks: T12844
Differential Revision: https://secure.phabricator.com/D18124
Summary:
Just add the monogram to the datasource's `name` field
so that it will match when typing Wnn in the typeahead field.
Test Plan:
Tested locally on my dev phab. Try searching for a panel
by monogram in the 'Add existing panel' dialog on the
'arrange workboard' interface.
Previously: typing W123 showed no results.
After this change: typing W123 finds the panel W123
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18121
Summary: Moves DiffusionTagsListView to uhhh, list. Separates out table view which is still in use now, implements mobile friendly UI for tags.
Test Plan:
Review KDE's Krita repository locally with lots of tags, desktop and mobile.
{F4997708}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12824
Differential Revision: https://secure.phabricator.com/D18115
Summary: Adds a new DiffusionBranchListView which replaces the BranchTable when browsing all branches in Diffusion. Has all the same capabilities, but is easier to read, adds a Compare button, and plays nicely on mobile. It does take up more space, but I think that's generally OK here since we expect our branches to not be heaping piles of intern revert branches.
Test Plan:
Follow a few repositories with branches, like Phabricator and KDE's Krita. View layouts on mobile, tablet, desktop. Try out new compare button.
{F4996207}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: avivey, Korvin
Maniphest Tasks: T12824
Differential Revision: https://secure.phabricator.com/D18113
Summary: Adds a very basic list of all inline comments, threaded, and their status. Kept this a little simpler than the mock, mostly because sorting here feels a little strange given threads would be all over the place. Not sure sorted is needed in practice anyways. I'd probably lean towards just adding a JS checkbox to hide certain rows if needed in the future.
Test Plan:
Test various commenting structures:
- Leave Comment
- Update Diff
- Leave new comment
- Reply to comment
- Reply to comment as revision author
- Mark items as done
- Update diff again
{F4996915}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D18112
Summary: Fixes T12828. This API was tightened up D17616, but I missed this callsite.
Test Plan: I've just got a good feeling in my bones.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12828
Differential Revision: https://secure.phabricator.com/D18119
