Summary: Ref T13425. When we render a diff between two source lines, highlight intraline changes.
Test Plan: Viewed a Jupyter notebook with a code diff in it, saw the changed subsequences in the line highlighted.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20851
Summary:
See PHI1468. Engine selection for diffs is currently too aggressive in trying to find a shared engine and will fall back a shared engine with a very low score, causing all ".json" files to render as Jupyter files.
Only pick an engine as a difference engine by default if it's the highest-scoring engine for the new file.
Test Plan: Viewed ".json" files and ".ipynb" files in a revision. Before, both rendered as Jupyter. Now, the former rendered as JSON and the latter rendered as Jupyter.
Differential Revision: https://secure.phabricator.com/D20850
Summary:
Depends on D20844. Ref T13425. When we line up two blocks and they can be interdiffed (generally: they both have the same type of content), let the Engine interdiff them.
Then, make the Jupyter engine interdiff markdown.
Test Plan: {F6898583}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20845
Summary:
Depends on D20843. Ref T13425. Add very basic support for "Show Hidden Context", in the form of folding it behind an unclickable shield. This isn't ideal, but should be better than nothing.
Prepare for "intraline" diffs on content blocks.
Fix newline handling in Markdown sections in Jupyter notebooks.
Remove the word "visibile" from the codebase.
Test Plan: {F6898192}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20844
Summary:
Ref T13425. Some diff checks currently sequence incorrectly:
- When we're rendering block lists, syntax highlighting isn't relevant.
- The "large change" guard can prevent rendering of otherwise-renderable changes.
- Actual errors in the document engine (like bad JSON in a ".ipynb" file) aren't surfaced properly.
Improve sequencing somewhat to resolve these issues.
Test Plan:
- Viewed a notebook, no longer saw a "highlighting disabled" warning.
- Forced a notebook to fail, got a useful inline error instead of a popup dialog error.
- Forced a notebook to have a large number of differences, got a rendering out of it.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20843
Summary: This text is significantly more clear and helpful for users.
Test Plan: Tried to do something I'm not suppposed to, hit the 403 page.
Differential Revision: https://secure.phabricator.com/D20847
Summary: See PHI1466. When an install defines task subtypes, show them on the task graph.
Test Plan:
- On desktop with subtypes defined, column is visible.
- On desktop with subtypes not defined, column is hidden.
- On mobile, column is hidden.
{F6896845}
Differential Revision: https://secure.phabricator.com/D20842
Summary:
See PHI1442. If you have a bulk-editable datasource field with a composite datasource, it can currently fatal on the bulk edit workflow because the viewer is not passed correctly.
The error looks something like this:
> Argument 1 passed to PhabricatorDatasourceEngine::setViewer() must be an instance of PhabricatorUser, null given, called in /Users/epriestley/dev/core/lib/phabricator/src/applications/typeahead/datasource/PhabricatorTypeaheadCompositeDatasource.php on line 231
Test Plan: Configured a Maniphest custom field with a composite datasource, then tried a bulk edit. Things worked cleanly instead of fataling.
Differential Revision: https://secure.phabricator.com/D20841
Summary:
Ref T13425. Currently, code inputs and all outputs are grouped into a single block. This is fine for display notebooks but not great for diffing notebooks.
Instead, split source code input into individual lines with one line per block, and each output into its own block.
This allows you to leave actual line-by-line inlines on source, and comment on outputs individually.
Test Plan: {F6888583}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20840
Summary: Depends on D20838. Fixes T13414. Instead of doing coarse diffing with "PhutilEditDistanceMatrix", use hash-and-diff with "DocumentEngine".
Test Plan:
- On a large document (~3K top level blocks), saw a more sensible diff, instead of the whole thing falling back to "everything changed" mode.
- On a small document, still saw a sensible granular diff.
{F6888249}
Maniphest Tasks: T13414
Differential Revision: https://secure.phabricator.com/D20839
Summary: Depends on D20836. Ref T13414. Ref T13425. Ref T13395. Move these to "phabricator/" before trying to improve the high-level diff engine in prose diffs.
Test Plan: Ran "arc liberate", looked at a prose diff (no behavioral change).
Maniphest Tasks: T13425, T13414, T13395
Differential Revision: https://secure.phabricator.com/D20838
Summary:
Depends on D20835. Ref T13425. Ref T13414. When a document has a list of content blocks, we may not be able to diff it directly, but we can hash each block and then diff the hashes (internally "diff" also does approximately the same thing).
We could do this ourselves with slightly fewer layers of indirection, but: diff already exists; we already use it; we already have a bunch of abstractions on top of it; and it's likely much faster on large inputs than the best we can do in PHP.
Test Plan: {F6888169}
Maniphest Tasks: T13425, T13414
Differential Revision: https://secure.phabricator.com/D20836
Summary:
Depends on D20834. Ref T13425. After the change from "th" to "td" for accessibility, the algorithm picks which cells it should highlight slightly improperly (it picks too many cells since it can no longer find the line numbers).
Ideally, it would probably highlight //only// the source content, but there isn't an easy way to do this right now. Settle for an incremental improvement for the moment.
Test Plan: Hovered over line numbers, saw a more accurate highlight area.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20835
Summary: Depends on D20833. Ref T13425. This look like it "just works"?
Test Plan: Left inline comments on a Juptyer notebook. Nothing seemed broken? Confusing.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20834
Summary:
Depends on D20832. Ref T13425. Emit Jupyter notebooks as diffable blocks with block keys.
No diffing or proper inlines yet.
Test Plan: {F6888058}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20833
Summary:
Depends on D20831. Ref T13425. As an escape hatch to get out of future DocumentEngine rendering behavior, provide a "View As.." option.
Now I can break DocumentEngine real bad and no one can complain.
Test Plan: Used "View As" to swap document engines for image files.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20832
Summary:
Depends on D20830. Ref T13425. Have the image engine elect into block rendering, then emit blocks.
This is rough (the blocks aren't actually diffed yet) but image diffs were already pretty rough so this is approximately a net improvement.
Test Plan: Viewed image diffs, saw nothing worse than before.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20831
Summary:
Ref T13425. Allow DocumentEngines to claim they can produce diffs. If both sides of a change can be diffed by the same document engine and it can produce diffs, have it diff them.
This has no impact on runtime behavior because no upstream engine elects into diff generation yet.
Test Plan: Loaded some revisions, nothing broke.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20830
Summary:
Fixes T13284. See that task for substantial discussion. There are currently two cases where we'll skip over commits which we should publish:
- if a branch is not permanent, then later made permanent; or
- in some cases, the first time we examine branches in a repository.
In both cases, this error is one-shot and things work correctly going forward. The root cause is conflation between the states "this ref currently permanent" and "this ref was permanent the last time we updated refs".
Separate these pieces of state and cover all these cases. Also introduce a "--rebuild" flag to fix the state of bad commits.
Test Plan:
See T13284 for the three major cases:
- initial import;
- push changes to a nonpermanent branch, update, then make it permanent;
- push chanegs to a nonpermanent branch, update, push more changes, then make it permanent.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13284
Differential Revision: https://secure.phabricator.com/D20829
Summary: Fixes T13420. Allow installs to provide username change instructions if there's someone you should contact to get this done.
Test Plan: {F6885027}
Maniphest Tasks: T13420
Differential Revision: https://secure.phabricator.com/D20828
Summary: Ref T13420. This workflow currently dead-ends for non-administrators. Instead, provide explanatory text.
Test Plan:
- Clicked "Change Username" as an administrator, same workflow as always.
- Clicked "Change Username" as a non-administrator, got explanatory text.
Maniphest Tasks: T13420
Differential Revision: https://secure.phabricator.com/D20827
Summary:
Ref T13420. These warnings are currently more severe than they need to be; weaken them.
Among other cases, the upstream supports and encourages changing usernames when users change human names.
The login/password instructions are also out of date since sessions were decoupled from usernames about a year ago.
Test Plan: Hit dialog as an administrator
Maniphest Tasks: T13420
Differential Revision: https://secure.phabricator.com/D20826
Summary: Ref T13410. Fixes T4280. Allows you to put a named anchor into a document explicitly.
Test Plan: Used `{anchor ...}` in Remarkup, used location bar to jump to anchors.
Maniphest Tasks: T13410, T4280
Differential Revision: https://secure.phabricator.com/D20825
Summary:
Depends on D20820. Ref T13410. We currently cut anchor names in the middle, don't support emoji in anchors, and generate relatively short anchors.
Generate slightly longer anchors, allow more unicode, and try not to cut things in the middle.
Test Plan: Created a document with a variety of different anchors and saw them generate more usable names.
Maniphest Tasks: T13410
Differential Revision: https://secure.phabricator.com/D20821
Summary:
Ref T13410. We currently generate some less-than-ideal anchors in remarkup, but it's hard to change the algorithm without breaking stuff.
To mitigate this, allow `#xyz` to match any target on the page which begins with `xyz`. This means we can make anchors longer with no damage, and savvy users are free to shorten anchors to produce more presentation-friendly links.
Test Plan: Browsed to `#header-th`, was scrolled to `#header-three`, etc.
Maniphest Tasks: T13410
Differential Revision: https://secure.phabricator.com/D20820
Summary: Fixes T13423. The "Query" class for conduit call logs is missing a "withIDs()" method.
Test Plan: Paged through Conduit call logs.
Maniphest Tasks: T13423
Differential Revision: https://secure.phabricator.com/D20823
Summary: Ref T13279. Facts is still fairly rough, but not broken/policy-violating, so it can be unprototyped to fix the issue where Maniphest reports (which are now driven by Facts) don't work if prototypes are disabled.
Test Plan: Viewed Maniphest reports and Project reports with prototypes on/off and Fact installed/uninstalled.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20822
Summary:
Depends on D20818. Ref T13279. The behavior of the "burndown" chart has wandered fairly far afield; make it look more like a burndown.
Move the other thing into an "Activity" chart.
Test Plan: {F6865207}
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20819
Summary:
Ref T13279. Allow engines to choose how areas in a stacked area chart stack on top of one another.
This could also be accomplished by using multiple stacked area datasets, but datasets would still need to know if they're stacking "up" or "down" so it's probably about the same at the end of the day.
Test Plan: {F6865165}
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20818
Summary: Ref T13279. Fix some tabular stuff, draw areas better, make the "compose()" API more consistent, unfatal the demo chart, unfatal the project burndown, make the project chart do something roughly physical.
Test Plan: Looked at charts, saw fewer obvious horrors.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20817
Summary: Depends on D20815. Ref T13279. Give datapoints "refs", which allow us to figure out where particular datapoints came from even after the point is transformed by functions. For now, show the raw points in a table below the chart.
Test Plan: Viewed chart data, saw reasonable-looking numbers.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20816
Summary:
Depends on D20814. Currently, "min()" and "max()" are still "min(f, n)". This is no longer consistent with the construction of functions a function-generators that are composed at top level.
Turn them into "min(n)" and "max(n)" (i.e., not higher-order functions).
Then, mark all the functions which are pure mathematical functions and not higher-order as "pure". These functions have no function parameters and do not reference external data. For now, this distinction has no immediate implications, but it will simplify the next change (which tracks where data came from when it originated from an external source -- these pure functions never have any source information, since they only apply pure mathematical transformations to data).
Test Plan: Loaded a burnup chart, nothing seemed obviously broken.
Subscribers: yelirekim
Differential Revision: https://secure.phabricator.com/D20815
Summary: Ref T13279. We currently draw a point on the chart for each datapoint, but this leads to many overlapping circles. Instead, aggregate the raw points into display points ("events") at the end.
Test Plan: Viewed a stacked area chart with many points, saw a more palatable number of drawn dots.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20814
Summary: This psueudocode should use the result of computation at the end.
Test Plan: Read carefully.
Differential Revision: https://secure.phabricator.com/D20813
Summary:
Ref T13413. In Chrome 77, workboard cards with titles that must break in the middle of words cause the browser to completely lock up.
Work around the major known instance of this by overriding the "break-word" behavior. This gives us worse rendering for tasks with very long "words" in their titles (they are truncated instead of broken) but fixes the freezing.
Once Chrome is fixed, this can be reverted.
Test Plan:
- Created a task named "MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM" on a workboard.
- Loaded the board in Chrome 77.
- Before: entire page locks up.
- After: smooth sailing, except the "MMMMMM..." is truncated.
Maniphest Tasks: T13413
Differential Revision: https://secure.phabricator.com/D20812
Summary: Ref T13411. This is a leftover from recent policy rendering changes.
Test Plan: Viewed feed with application policy stories, no more fatal.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20811
Summary:
Fixes T13415. Provide a way for subtypes to customize the behavior of "Change Subtype" actions that appear above comment areas.
Subtypes may disable this action by specifying `"mutations": []`, or provide a list of subtypes.
The bulk editor and API can still perform any change.
Test Plan:
- Tried to define an invalid "mutations" list with a bad subtype, got a sensible error.
- Specified a limited mutations list and an empty mutations list, verified that corresponding tasks got corresponding actions.
- Used the bulk editor to perform a freeform mutation.
- Verified that tasks of a subtype with no "mutations" still work the same way they used to (allow mutation into any subtype).
Maniphest Tasks: T13415
Differential Revision: https://secure.phabricator.com/D20810
Summary: See PHI1434. For objects that support subtypes and have subtypes configured, allow Herald rules to act on subtypes.
Test Plan:
- Configured task and project subtypes, wrote Herald rules, saw "Subtypes" as an option, saw appropriate typeahead values and detail page rendering.
- Unconfigured project subtypes, saw field vanish from UI for new rules.
- Wrote a "subtype"-depenent rule that added a comment, interacted with tasks of that subtype and a different subtype. Saw Herald act only on tasks with the correct subtype.
Differential Revision: https://secure.phabricator.com/D20809
Summary:
Fixes T7961. Currently, we present Herald users with actions like "Require legalpad signatures" and "Run build plans" even if Legalpad and Harbormaster are not installed.
Instead, allow fields and actions to be made "unavailable", which means that we won't present them as options when adding to new or existing rules.
If you edit a rule which already uses one of these fields or actions, it isn't affected.
Test Plan:
- Created a rule with a legalpad action, uninstalled legalpad, edited the rule. Action remained untouched.
- Created a new rule, wasn't offered the legalpad action.
- Reinstalled the application, saw the action again.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T7961
Differential Revision: https://secure.phabricator.com/D20808
Summary:
Fixes T13411. This looks like the last case where you hit a policy explanation and have permission to see the policy, but we don't currently show you the policy rules.
This implementation is slightly clumsy, but likely harmless.
Test Plan: {F6856421}
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20807
Summary:
Ref T13411. Currently, if you hit a policy exception because you can't view an object, we disclose details about the view policy of the object, particularly which project's members can see the object for project policies.
Although there's a large amount of grey area here, this feels like a more substantial disclosure than we offer in other contexts. Instead, if you encounter a policy exception while testing "CAN_VIEW" or don't have "CAN_VIEW", present an "opaque" explanation which omits details that viewers who can't view the object shouldn't have access to. Today, this is the name of "Project" policies (and, implicitly, the rulesets of custom policies, which we now disclose in other similar contexts).
Test Plan:
- Hit policy exceptions for "CAN_VIEW" on an object with a project view policy, saw an opaque explanation.
- Hit policy exceptions for "CAN_EDIT" on an object with a project edit policy and a view policy I satisfied, saw a more detailed explanation.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20806
Summary: Ref T13411. When users click a link to explain a capability (like the policy header on many objects, or the link next to specific capabilities in "Applications", "Diffusion", etc), inline the full ruleset for the custom policy into the dialog if the object has a custom policy.
Test Plan: {F6856365}
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20805
Summary:
Ref T13411. This cleans up policy name rendering. We ultimately render into three contexts:
- Plain text contexts, like `bin/policy show`.
- Transaction contexts, where we're showing a policy change. In these cases, we link some policies (like project policies and custom policies) but the links go directly to the relevant object or a minimal explanation of the change. We don't link policies like "All Users".
- Capability contexts, where we're describing a capability, like "Can Push" or cases in Applicaitons. In these cases, we link all policies to the full policy explanation flow.
Test Plan:
- Used `bin/policy show` to examine the policy of an object with a project policy, no longer saw HTML.
- Viewed the transaction logs of Applications (ModularTransactions) and Tasks (not ModularTransactions) with policy edits, including project and custom policies.
- Clicked "Custom Policy" in both logs, got consistent dialogs.
- Viewed application detail pages, saw all capabities linked to explanatory capability dialogs. The value of having this dialog is that the user can get a full explanation of special rules even if the policy is something mundane like "All Users".
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20804
Summary: Ref T13411. This pathway has an unused "icon" parameter with no callsites. Throw it away to ease refactoring.
Test Plan: Grepped for callsites, found none using this parameter.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20803
Summary:
Ref T13411. These three applications render an "Editable By: <policy>" field in their descriptions.
The pages that these appear on all have "Edit <thing>" actions which either tell you the policy or allow you to discover the policy, and this field is unusual (the vast majority of objects don't have it). I think it largely got copy/pasted or used as space-filler and doesn't offer much of value.
Remove it to simplify/standardize these pages and make changes to how this field works simpler to implement.
Test Plan: Viewed a Credential, Blog, and Space; no longer saw the "Editable By" field.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20802
Summary:
Ref T13411. Since circa D19829, transactions have rendered policy changes in a modern way, notably making "Custom Policy" clickable to show the policy rules.
Edit transactions in Applications still use a separate, older approach to render policies. This produces policy renderings which don't use modern quoting rules and don't link in a modern way.
Make Applications use the same rendering code that other transactions (like normal edit/view edits) use.
Test Plan: Edited policies in Applications, saw more useful transactions in the log. Clicked "Custom Policy" in the transaction log and got a useful explanation of the policy.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20801
Summary:
Ref T13410. See PHI1431. Currently, when you move a document in Phriction, the target shows a "This document was moved from ..." banner until it is edited.
This banner isn't particularly useful, and it's distracting and it isn't obvious how to dismiss it, and making a trivial edit to dismiss it is awkward.
This information is also already available in the transaction log.
Just remove this banner since it doesn't really serve any clear purpose.
Test Plan:
- Moved a page in Phriction, then loaded the destination page. Before change: header banner. After change: nothing.
- Viewed a normal (non-moved) page, saw normal behavior.
- Reviewed transactions, saw "Moved from ..." in the timeline.
Maniphest Tasks: T13410
Differential Revision: https://secure.phabricator.com/D20800
Summary:
Fixes T8808. Currently, all project use the default ("Briefcase") project icon when they appear in a policy dropdown.
Since project policies are separated out into a "Members of Projects" section of the dropdown anyway, there is no reason not to use the actual project icon, which is often more clear.
Test Plan: {F6849927}
Maniphest Tasks: T8808
Differential Revision: https://secure.phabricator.com/D20799
Summary:
Fixes T9136.
- Fix a bug where the name is rendered improperly.
- Put disabled rules at the bottom.
- Always show the rule monogram so you can distingiush between rules with the same name.
Test Plan: {F6849915}
Maniphest Tasks: T9136
Differential Revision: https://secure.phabricator.com/D20798
