Summary:
Depends on D18702. Ref T13008. This replaces the old hard-coded single rate limit with multiple flexible limits, and defines two types of limits:
- Rate: reject requests if a client has completed too many requests recently.
- Connection: reject requests if a client has too many more connections than disconnections recently.
The connection limit adds +1 to the score for each connection, then adds -1 for each disconnection. So the overall number is how many open connections they have, at least approximately.
Supporting multiple limits will let us do limiting by Hostname and by remote address (e.g., a specific IP can't exceed a low limit, and all requests to a hostname can't exceed a higher limit).
Configuring the new limits looks something like this:
```
PhabricatorStartup::addRateLimit(new PhabricatorClientRateLimit())
->setLimitKey('rate')
->setClientKey($_SERVER['REMOTE_ADDR'])
->setLimit(5);
PhabricatorStartup::addRateLimit(new PhabricatorClientConnectionLimit())
->setLimitKey('conn')
->setClientKey($_SERVER['REMOTE_ADDR'])
->setLimit(2);
```
Test Plan:
- Configured limits as above.
- Made a lot of requests, got cut off by the rate limit.
- Used `curl --limit-rate -F 'data=@the_letter_m.txt' ...` to upload files really slowly. Got cut off by the connection limit. With `enable_post_data_reading` off, this correctly killed the connections //before// the uploads finished.
- I'll send this stuff to `secure` before production to give it more of a chance.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13008
Differential Revision: https://secure.phabricator.com/D18703
Summary: Ref T8588. It looks like something slow is happening //before// we start DarkConsole. Add some crude reporting to try to narrow it down.
Test Plan: {F743050}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8588
Differential Revision: https://secure.phabricator.com/D13956
Summary:
Ref T8424. This adds a standard KeyValueCache to serve as a request cache.
In particular, I need to cache Spaces (they are frequently accessed, sometimes by multiple viewers) but not have them survive longer than the scope of one request.
This request cache is explicitly destroyed by each web request and each daemon request.
In the very long term, building this kind of construct supports reusing PHP interpreters to run web requests (see some discussion in T2312).
Test Plan:
- Added and executed unit tests.
- Ran every daemon.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8424
Differential Revision: https://secure.phabricator.com/D13153
Summary:
Fixes T6692. Addresses two main issues:
- The write guard would sometimes not get disposed of on exception pathways, generating an unnecessary secondary error which was just a symptom of the original root error.
- This was generally confusing and reduced the quality of reports we received because users would report the symptomatic error sometimes instead of the real error.
- Instead, reflow the handling so that we always dispose of the write guard if we create one.
- If we missed the Controller-level error page generation (normally, a nice page with full CSS, etc), we'd jump straight to Startup-level error page generation (very basic plain text).
- A large class of errors occur too early or too late to be handled by Controller-level pages, but many of these errors are not fundamental, and the plain text page is excessively severe.
- Provide a mid-level simple HTML error page for errors which can't get full CSS, but also aren't so fundamental that we have no recourse but plain text.
Test Plan:
Mid-level errors now produce an intentional-looking error page:
{F259885}
Verified that setup errors still render properly.
@chad, feel free to tweak the exception page -- I just did a rough pass on it. Like the setup error stuff, it doesn't have Celerity, so we can't use `{$colors}` and no other CSS will be loaded.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, chad
Maniphest Tasks: T6692
Differential Revision: https://secure.phabricator.com/D11126
Summary:
Ref T5702. This is a forward-looking change which provides some very broad API improvements but does not implement them. In particular:
- Controllers no longer require `$request` to construct. This is mostly for T5702, directly, but simplifies things in general. Instead, we call `setRequest()` before using a controller. Only a small number of sites activate controllers, so this is less code overall, and more consistent with most constructors not having any parameters or effects.
- `$request` now offers `getURIData($key, ...)`. This is an alternate way of accessing `$data` which is currently only available on `willProcessRequest(array $data)`. Almost all controllers which implement this method do so in order to read one or two things out of the URI data. Instead, let them just read this data directly when processing the request.
- Introduce `handleRequest(AphrontRequest $request)` and deprecate (very softly) `processRequest()`. The majority of `processRequest()` calls begin `$request = $this->getRequest()`, which is avoided with the more practical signature.
- Provide `getViewer()` on `$request`, and a convenience `getViewer()` on `$controller`. This fixes `$viewer = $request->getUser();` into `$viewer = $request->getViewer();`, and converts the `$request + $viewer` two-liner into a single `$this->getViewer()`.
Test Plan:
- Browsed around in general.
- Hit special controllers (redirect, 404).
- Hit AuditList controller (uses new style).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5702
Differential Revision: https://secure.phabricator.com/D10698
Summary:
Fixes T6044. We've had two cases (both the same install, coincidentally) where pages got hung doing too much data fetching.
When pages hang, we don't get a useful stack trace out of them, since nginx, php-fpm, or PHP eventually terminates things in a non-useful way without any diagnostic information.
The second time (the recent Macros issue) I was able to walk the install through removing limits on nginx, php-fpm, php, and eventually getting a profile by letting the page run for several minutes until the request completed. However, this install is exceptionally technically proficient and this was still a big pain for everyone, and this approach would not have worked if the page actually looped rather than just taking a long time.
Provide `debug.time-limit`, which should give us a better tool for reacting to this situation: by setting it to a small value (like 10), we'll kill the page after 10 seconds with a trace, before nginx/php-fpm/php/etc can kill it uselessly. Hopefully that will be enough information to find the issue (generally, getting a trace has been 95% of the problem in the two cases we've encountered).
Test Plan: Set this option to `3` and added a sleep loop, saw a termination after 3 seconds with a useful trace.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: csilvers, joshuaspence, epriestley
Maniphest Tasks: T6044
Differential Revision: https://secure.phabricator.com/D10465
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary:
Fixes T3923. On `secure.phabricator.com`, we occasionally get slowed to a crawl when someone runs a security scanner against us, or 5 search bots decide to simultaneously index every line of every file in Diffusion.
Every time a user makes a request, give their IP address some points. If they get too many points in 5 minutes, start blocking their requests automatically for a while.
We give fewer points for logged in requests. We could futher refine this (more points for a 404, more points for a really slow page, etc.) but let's start simply.
Also, provide a mechanism for configuring this, and configuring the LB environment stuff at the same time (this comes up rarely, but we don't have a good answer right now).
Test Plan: Used `ab` and reloading over and over again to hit rate limits. Read documentation.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T3923
Differential Revision: https://secure.phabricator.com/D8713
Summary:
See <https://github.com/facebook/phabricator/issues/487>. If an exception is thrown too high in the stack for the main exception handling to deal with it, we currently never report a stack trace. Instead:
- Always report a stack trace to the error log.
- With developer mode, also report a stack trace to the screen.
Test Plan: Added a high-level `throw` and hit both cases. Got traces in the log and traces-under-developer-mode on screen.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8022
Summary:
D6278 kind of got closed and commited, this is the actual direction.
Ref T3432
Depends on D6277
Test Plan: Keep using the site
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, mbishopim3
Maniphest Tasks: T3432
Differential Revision: https://secure.phabricator.com/D6283
Summary:
If D6277 is the way to go, then this will be it's implementation.
Depends on D6277
Test Plan: Keep using the site
Reviewers: epriestley
CC: aran, Korvin
Maniphest Tasks: T3432
Differential Revision: https://secure.phabricator.com/D6278
Summary:
Ref T2787. For payment methods that allow you to add a billable method (i.e., a credit card), move all the logic into the provider. In particular:
- Providers may (Stripe, Balanced) or may not (Paypal, MtGox) allow you to add rebillable payment methods. Providers which don't allow rebillable methods will appear at checkout instead and we'll just invoice you every month if you don't use a rebillable method.
- Providers which permit creation of rebillable methods handle their own data entry, since this will be per-provider.
- "Add Payment Method" now prompts you to choose a provider. This is super ugly and barely-usable for the moment. When there's only one choice, we'll auto-select it in the future.
Test Plan: Added new Stripe payment methods; hit all the Stripe errors.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D5756
Summary:
For some time, we've stopped the profiler twice when it was invoked by the sampling mechanism. The first time it actually stops, and we write a profile. The second time it hadn't been started, so it returns empty and we write an invalid profile.
Instead, keep track of whether it is running or not, and don't stop it a second time.
Ref T2870.
Test Plan: Set sample rate to 1-in-3, observed valid sample profiles generate.
Reviewers: btrahan, chad
CC: aran
Maniphest Tasks: T2870
Differential Revision: https://secure.phabricator.com/D5534
Summary:
We have a fair number of conditionals on the existence of the access log. Instead, always build it and just don't write it if the user doesn't want a version on disk.
Also, formalize logged-in user PHID (avoids object existence juggling) in the access log and move microseconds-since-startup to PhabricatorStartup (simplifies index.php).
Depends on D5532. Fixes T2860. Ref T2870.
Test Plan: Disabled access log, verified XHProf writes occurred correctly.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2860, T2870
Differential Revision: https://secure.phabricator.com/D5533
Summary:
The fixed-position side nav background thing tends to make looking at print_r() output hard. Also, it breaks Ajax, etc.
- Loudly call out unexpected output on normal pages, to catch extra spaces before `<?php`, etc.
- Display unexpected output in an attractive panel on normal pages.
- Log unexpected output instead of breaking Ajax.
Test Plan:
{F32267}
Also triggered various fatals and verified they still show the right messages (no blank pages).
Reviewers: vrana, btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4892
Summary:
- Separate the ideas of "requested" (explicit user request) vs "started" (user request or sampling).
- Move this code out of index.php into the XHProf stuff (general effort to make index.php smaller).
Test Plan:
Verified that profiling still works, and profiling extends to ajax requests.
Set sampling rate to 2, saw 50% samples.
Looked at database, saw sampling data populating properly.
Reviewers: vrana, nh
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4891
Summary: Route all `$_SERVER['HTTP_...']` stuff through AphrontRequest (it would be nice to make this non-static, but the stack is a bit tangled right now...)
Test Plan: Verified CSRF and cascading profiling. `var_dump()`'d User-Agent and Referer and verified they are populated and returned correct values when accessed. Restarted server to trigger setup checks.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4888
Summary:
- PHABRICATOR_ENV is now optional. If you don't specify it, we won't load a config file.
- PhabricatorSetup is now gone.
- I removed the alternate file domain check for now, see T2380.
- `phabricator.setup` config is now gone.
- Rewrote documentation:
- No more mentions of `phabricator.setup`.
- Normal install guide no longer mentions PHABRICATOR_ENV. This is now an advanced topic.
- Clarified that you only need to set up one of apache, nginx or lighttpd.
- Tweaked a few things I've seen users have difficulty with.
This should have no effect on any existing installs, but make the process much simpler for future installs.
Closes T2221.
Closes T2223.
Closes T2228.
Test Plan:
- Removed my PHABRICATOR_ENV and went through the install process.
- Generated and read documentation.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2221, T2223, T2228
Differential Revision: https://secure.phabricator.com/D4596
Summary:
- Allow new-style setup to raise fatal setup errors.
- Port extension checks to new-style setup as fatal errors.
- When fatal errors are raised, abort setup and show them in a chrome-free response.
Test Plan: {F29981}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4587
Summary:
Fixes T2293.
We currently hard-require this in setup. We do not need to; we don't actually need it until we start running daemons. Move it to post-install and provide more guidance.
We could make this even easier in the future, but we'd need to special case it, since it's dangerous to let it be set to any value (if you set it to the wrong value, you can't log in). We could safely have a workflow which writes the current request URI into the database configuration, or a two-stage workflow where we set the URI and then verify it, but these both imply some special casing and complication. This should be a step forward from where we are today, regardless.
Test Plan:
Removed "phabricator.base-uri" from my configuration. Verified Phabricator still works.
Without "phabricator.base-uri" configured, logged in from multiple host names (127.0.0.1:8080, local.aphront.com:8080).
Configured "phabricator.base-uri". Verified my unblessed session no longer worked. Verified setup issue went away.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2293
Differential Revision: https://secure.phabricator.com/D4580
Summary:
This is basicaly a light version of D4286. The major problem with D4286 is that it's a huge leap and completely replaces the setup process in one step.
Instead, I want to do this:
- Add the post-setup warnings (yellow bar with "6 unresolved warnings...").
- Copy all setup checks into post-setup warnings (so every check has an old-style check and a new-style check).
- Run that for a little bit and make sure it's stable.
- Implement fatal post-setup checks (the red screen, vs the yellow bar).
- Run that for a little bit.
- Nuke setup mode and delete all the old checks.
This should give us a bunch of very gradual steps toward the brave new world of simpler setup.
Test Plan:
- Faked APC setup failures, saw warnings raise.
- Verified that this runs after restart (get + set).
- Verified that this costs us only one cache hit after first-run (get only).
Reviewers: btrahan, codeblock, vrana, chad
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4295
Summary:
In the past, we did some additional magic on `$response_string` (adding profiling headers? Or DarkConsole?), so we could not share the pathway with HTTPSink. We no longer do this; share the pathways.
Also remove error handler initialization (duplicated in PhabricatorEnv), and move $sink initialization earlier. My general goal here is to allow PhabricatorSetup to emit a normal Response object and share as much code as possible with normal pages.
Test Plan: Loaded page.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4285
Summary:
We have a bunch of code duplication now between __init_script__.php and webroot/index.php. Consoldiate these methods and move them into PhabricatorEnv.
Merge PhabricatorRequestOverseer into PhabricatorStartup.
Test Plan: Loaded page, ran script. Wiped PHABRICATOR_ENV; loaded page, ran script; got errors.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2223
Differential Revision: https://secure.phabricator.com/D4283
Summary:
We have a lot of mess to get through before we can load libphutil and enter Phabricator code properly. Move it to a dedicated class.
I'm probably going to merge PhabricatorRequestOverseer into this, although the check that lives there now is kind of weird. It also does not really need to be a pre-load check and could be handled better.
I stopped shoving stuff in here once I got to ENV stuff, I'm going to tackle that next.
Test Plan: Ran phabricator normally; introduced fatals and misconfigurations. Grepped for changed symbols.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, asherkin
Maniphest Tasks: T2223
Differential Revision: https://secure.phabricator.com/D4282
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary: We currently show the table flipping error page only for E_ERROR and E_PARSE, but should for E_COMPILE_ERROR as well.
Test Plan: Added a method with a bad signature to a class. Loaded page. Got a helpful message instead of a blank page.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3791
Summary:
When there is an exception in `index.php` then we currently get only blank screen.
Print it instead.
Test Plan: Thrown exceptions on several places of `index.php` and controller, got best results.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3619
Summary:
People have occasionally complained about phabricator being slow. We have
the access log to look at to see when slowness happens, but it doesn't tell
us much about why it happened. Since it's usually a sporadic issue that's
reported, it's hard to reproduce and then profile. This change will allow us
to collect sampled profiles so we can look at them when slowness occurs.
Test Plan:
checking that sampling works correctly:
- set rate to 0; do several page loads; check no new entries in table
- set rate to 1; check that there's a new row in the table for each page load
- set rate to 10; check that some requests write to table and some don't
check new ui for samples:
- load /xhprof/list/all/, see a list with a lot of samples
- load /xhprof/list/sampled/, see only sampled runs
- load /xhprof/list/manual/, see only non-sampled runs
- load /xhprof/list/my-runs/, se only my manual runs
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3458
Summary:
Currently, when a user runs "arc diff" and the diff exceeds PHP's 'post_max_size', they get a very confusing and irrelevant error about a missing Conduit session token. The reason for this is that 'post_max_size' doesn't build $_POST, so //all// the data is missing.
We try to detect this, but currently only do so effectively for specific file upload forms. Broaden the detection to cover all cases.
Previously, we ran into an issue where Firefox + HTML5 drag-and-drop uploads would get a false positive on this detection. I dug into this and added the Content-Type checks, which correctly handle that case.
Test Plan: With small and large 'post_max_size', ran small and large normal, HTML5 and multipart/form-data POST requests against Phabricator in Safari and Firefox. Got desired beahviors.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: tido, aran
Differential Revision: https://secure.phabricator.com/D3320
Summary:
Turns out that 12 characters is not enough for folks that have
memory_limit set to INT64_MAX (9223372036854775807).
Since this only seems to have affected a single installation,
epriestley says let's get rid of it. If it comes up again, we can
restore the check but use a bigger number.
Test Plan: Just make a call to the phabricator webroot.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1641
Differential Revision: https://secure.phabricator.com/D3246
Summary:
This makes no changes, it just moves the menu icons to the applications instead of hard-coded on the page.
I'm going to try to address some of the angst in T1593 next...
Test Plan: Loaded logged-in / logged out pages. Clicked menu items. Looked at /applications/.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1593, T1569
Differential Revision: https://secure.phabricator.com/D3146
Summary:
In some cases, we shell out to things (like Pygments for syntax highlighting).
However, on cloud servers or shared web servers, those binaries aren't always
installed system-wide.
This patch allows for appending to the environment variable $PATH, to look for
other, non-default places for these binaries.
Test Plan:
* Copied the patch over to a test OpenShift instance and applied it.
* Added the path to my local copy of Pygments (pygmentize wasn't available on the system)
into the Phabricator config.
* Refreshed a Paste page, and saw colors.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3091
Phabricator requires mod_rewrite rule to emulate "routing"
interface between web server and PHP aplication. Since PHP 5.4 where
is built-in web server that can be invoked with
"PHP -S 127.0.0.1:8000", but since it's very simple it don't have
mod_rewrite functionality. But it have routing functionality if .php
file is given via command-line - so this simple fix allows to
use PHP 5.4+ built-in web server to start Phabricator. Useful for
hacking, developing and testing. Use like this:
"php -S 127.0.0.1:8000 ~/Documents/phabricator/webroot/ ~/Documents/phabricator/webroot/index.php"
Summary:
I want to move queryfx() and family to libphutil, for @chad and others (see T1283). We need to break a few dependencies to do this.
Since AphrontWriteGuard is independently useful, I broke the dependency between it and AphrontRequest rather than between Connection and WriteGuard. I'll move its implementation to libphutil in a future diff.
Test Plan: Loaded site, submitted CSRF form successfully, monkeyed with CSRF token, submitted CSRF form, got error.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1283
Differential Revision: https://secure.phabricator.com/D3042
Summary:
Currently, it's hard to debug performance issues on POST pages. Add flags to stop redirects and always collect profiles.
Also fix an issue with "all" profiles. This feature is mostly just for profiling DarkConsole itself and is rarely used, I think it's been broken for some time. There's no way to get to it with the UI.
NOTE: Some JS workflows don't stop on redirect because they use JS/AJAX redirects.
Test Plan: Enabled options, browsed, got stopped on redirects and had profiles generated. Disabled options and verified redirects and profiles work normally.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2990
Summary:
PhabricatorAccessLog called date() before we set the timezone; this
reorders the commands.
Test Plan: loaded my sandbox; checked log to see that hphp didn't complain
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2911
Summary:
This is the first step in Phabricator internationalization.
It adds a translation selector and calls it at startup.
Installations can add custom selectors to override some texts.
We can add official translations in future.
Next step is to allow user to choose his translation which will override the global one.
This is currently used only for English plurals.
Test Plan: Displayed a diff with unit test error, verified that it says 'Detail' or 'Details' and not 'Detail(s)'.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D2753
Summary:
- The config is called "resource-path" and the script references "resource-path", but the actual value checked for is "resource-map".
- Use nonempty(), since defaulting with getEnvConfig() will give you null if the setting exists but is set to null. This default is nearly useless so maybe we should change it to use coalesce().
- Remove Celerity map initialization from warmup. We don't currently initialize the environment in warmup, and Celerity initialization now depends on the environment.
Test Plan: Ran patch locally and on FPM-Warmup.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: hsb, aran
Differential Revision: https://secure.phabricator.com/D2662
Summary:
Several problems:
- With fpm-warmup, 'PhabricatorAccessLog' is always loaded, even if it hasn't actually initialized. Use a global instead (barf). I'll fix this when I refactor index.php, hopefully soon.
- The 'POST' check isn't sufficient in Firefox for HTML5 uploads -- not 100% sure why, maybe it encodes post bodies differently? I added an additional '__file__' requirement, and will add this param to GET on all file uploads in a future diff.
See discussion in D2381.
Test Plan: Uploaded files with Firefox via drag-and-drop without various mysterious errors.
Reviewers: vrana, btrahan, jungejason
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2405
Summary: I have a patch which makes uploads all fancy and adds progress bars, but document the landscape first since it's quite complicated.
Test Plan: Generated, read docs. Configured `storage.upload-size-limit` to various values.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T875
Differential Revision: https://secure.phabricator.com/D2381
