Summary: Ref T5245. This moves the actual storage over and stops reads and writes to the old table.
Test Plan:
- Verified tasks retained projects across the migration.
- Added and removed projects from tasks.
- Searched for: all, any, users' projects, not-in-projects, no-projects.
Reviewers: chad, btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9850
Summary: I'm pretty sure that `@group` annotations are useless now... see D9855. Also fixed various other minor issues.
Test Plan: Eye-ball it.
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9859
Summary:
Ref T4673.
IMPORTANT: I had to break one thing (see TODO) to get this working. Not sure how you want to deal with that. I might be able to put the element //inside// the workboard, or I could write some JS. But I figured I'd get feedback first.
General areas for improvement:
- It would be nice to give you some feedback that you have a filter applied.
- It would be nice to let you save and quickly select common filters.
- These would probably both be covered by a dropdown menu instead of a button, but that's more JS than I want to sign up for right now.
- Managing custom filters is also a significant amount of extra UI to build.
- Also, maybe these filters should be sticky per-board? Or across all boards? Or have a "make this my default view"? I tend to dislike implicit stickiness.
Test Plan:
Before:
{F157543}
Apply Filter:
{F157544}
Filtered:
{F157545}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: qgil, swisspol, epriestley
Maniphest Tasks: T4673
Differential Revision: https://secure.phabricator.com/D9211
Summary: This doesn't have any impact on anything right now (we don't persist the query) but could in the future, so I just left it as-is but fixed the typo.
Test Plan: looked at it carefully
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: WikiChad, epriestley
Differential Revision: https://secure.phabricator.com/D9155
Summary:
Fixes T5081. This block enforces policies and prevents you from seeing groups associated with projects you can't see. However, it incorrectly removes tasks which end up with no group key. This can happen in two cases:
- The task isn't in a project.
- The task is in a project, but the query includes an "In All Projects: <that project>" constraint. In that case, we don't show the group becuase it would always contain every task.
Test Plan:
Replicated the setup in T5081, saw an "Ungrouped" group with "Task A":
{F155766}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5081
Differential Revision: https://secure.phabricator.com/D9152
Summary:
Ref T1812. I think integer constants are going to be confusing and error prone for users to interact with. For example, because we use 0-5, adding a second "open" status like "needs verification" without disrupting the existing statuses would require users to define a status with, e.g., constant `6`, but order it between constants `0` and `1`. And if they later remove statuses, they need to avoid reusing existing constants.
Instead, use more manageable string constants like "open", "resolved", etc.
We must migrate three tables:
- The task table itself, to update task status.
- The transaction table, to update historic status changes.
- The saved query table, to update saved queries which specify status sets.
Test Plan:
- Saved a query with complicated status filters.
- Ran migrations.
- Looked at the query, at existing tasks, and at task transactions.
- Forced migrations to run again to verify idempotentcy/safety.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8583
Summary: Ref T1812. Moves most specialized status handling into `ManiphestTaskStatus`. The only real missing case is reports.
Test Plan:
Browsed most of the affected interfaces. Changed task status:
{F132697}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8579
Summary:
Fixes T4637.
- We already allow you to order by this column but don't have a key on it. Add one.
- Expose UI for querying on ranges.
Test Plan:
- Ran some queries, got reasonable-looking results and no table scans.
Reviewers: btrahan, bigo
Reviewed By: bigo
Subscribers: bigo, epriestley
Maniphest Tasks: T4637
Differential Revision: https://secure.phabricator.com/D8557
Summary:
Ref T4365. Primary search currently uses `PhabricatorSearchQuery` for storage, which is pretty much the same as `PhabricatorSavedQuery`, except that it's old and not used anywhere else anymore.
Maniphest used to also use this table, but no longer does after Septmeber, 2013. We need to retain the class so the migration can work.
This introduces `PhabricatorSearchApplicationSearchEngine` and `PhabricatorSearchDocumentQuery`, but they're both stubs that I just needed for technical reasons and/or to pass lint. The next couple patches will move logic into them and use ApplicationSearch properly.
Test Plan:
- Searched for stuff.
- Searched for stuff with filters.
- Searched for fulltext in Maniphest.
- Grepped for `PhabricatorSearchQuery`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4365
Differential Revision: https://secure.phabricator.com/D8120
Summary:
While we mostly have reasonable effective object accessibility when you lock a user out of an application, it's primarily enforced at the controller level. Users can still, e.g., load the handles of objects they can't actually see. Instead, lock the queries to the applications so that you can, e.g., never load a revision if you don't have access to Differential.
This has several parts:
- For PolicyAware queries, provide an application class name method.
- If the query specifies a class name and the user doesn't have permission to use it, fail the entire query unconditionally.
- For handles, simplify query construction and count all the PHIDs as "restricted" so we get a UI full of "restricted" instead of "unknown" handles.
Test Plan:
- Added a unit test to verify I got all the class names right.
- Browsed around, logged in/out as a normal user with public policies on and off.
- Browsed around, logged in/out as a restricted user with public policies on and off. With restrictions, saw all traces of restricted apps removed or restricted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7367
Summary:
Ref T603. Cleans up some obsolete stuff here:
- We no longer ever query by min/max priority (instead, `withPriorities(...)`).
- A parent class provides limit/offset.
- Result count is no longer reliable with policies. We could do "about X tasks" or something, but just drop it for now. There's only one remaining callsite anyway.
Test Plan:
- `grep`
- Viewed task list.
- Viewed a project page.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7121
Summary:
PHP_INT_MAX is rejected by ElasticSearch since it's outside of the representable integer range (see: <https://gist.github.com/JustinTulloss/c4ac0e1c93d6d1e91744>).
Just use 10K, as matching more than 10K results probably isn't useful to anyone.
Test Plan: Confirmed this fixes the issue in IRC. Ran a fulltext search.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7097
Summary:
Ref T603. See inlines for an explanation. The case where I hit this was loading the "Pending Differential Revisions" panel in Diffusion when logged out, after making a repository public.
What happens is that we load 10 revisions (say, D1 .. D10) but the user can't see any of them. We then try to load the next 10, but since the pagination is ordered by date modified, we need to base the next query on the modified date of the last thing we loaded (D10). However, since we use the viewer's policies to load that cursor object, it fails to load, and then we just issue the same query over and over again, loading D1 .. D10 until we run out of execution time.
Test Plan: Interface now loads correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7059
Summary: Ref T2625. Fixes user and project paging. Adds visibility-aware project group filtering.
Test Plan: Set page size very small and paged forward and backward in Maniphest, particularly with "Assigned" and "Project" group-by filters.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D6973
Summary:
Ref T2625. Depends on D6971. Maniphest is complicated to implement cursor paging for. Builds on D6971 to do so.
This is //almost// complete. Paging on projects and authors doesn't quite work, I'll clean that up shortly. Left some TODOs.
Test Plan: Set page size to `3`, paged forward and backward in a bunch of group/order modes. Results seemed to be as expected.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D6972
Summary:
See discussion in D6955. Currently, the logic for "Group by: Project" is roughly:
- Load every possible result.
- Lots of in-process garbage.
Instead, use the new local project name index (from D6957) to service this query more reasonably. Basically:
- Join a table which has keyed project names.
- Order by that table.
Test Plan: {F58033}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6958
Summary: Depends on D6952. Unpunts there since I'm rolling into a swamp full of schema changes.
Test Plan: Issued date-constrained query and saw key as a candidate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6954
Summary: Adds date created filtering. There's a task for this somewhere that I can't immediately find.
Test Plan: Filtered tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6952
Summary: Restores any/all/user/exclude project filters to the new search.
Test Plan: Filtered stuff by projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6951
Summary: Restores this field to the new ApplicationSearch-based search.
Test Plan: Used fulltext search to find tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6950
Summary: Move this into a more consistent location.
Test Plan: Loaded Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6949
Summary:
- `kill_init.php` said "Moving 1000 files" - I hope that this is not some limit in `FileFinder`.
- [src/infrastructure/celerity] `git mv utils.php map.php; git mv api/utils.php api.php`
- Comment `phutil_libraries` in `.arcconfig` and run `arc liberate`.
NOTE: `arc diff` timed out so I'm pushing it without review.
Test Plan:
/D1234
Browsed around, especially in `applications/repository/worker/commitchangeparser` and `applications/` in general.
Auditors: epriestley
Maniphest Tasks: T1103
Summary: NOTE: This is not produced by a script so there might be errors. Please review carefully.
Test Plan: Browse around.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D2091
Summary:
Like the title says, similar to Facebook Tasks.
Not sure how I really feel about this, but I guess it's kind of OK? I never used
this feature in Facebook Tasks but I think some people like it.
The drag-and-drop to repri across priorities feels okayish.
Because subpriority is a double and we just split the difference when
reprioritizing, you lose ~a bit of precision every time you repri two tasks
against each other and so you can break it by swapping the priorities of two
tasks ~50 times. This case is pretty silly and pathological. We can add some
code to deal with this at some point if necessary.
I think this also fixes the whacky task layout widths once and for all.
(There are a couple of minor UI glitches like headers not vanishing and header
counts not updating that I'm not fixing because I am lazy.)
Test Plan: Dragged and dropped tasks around.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley, mgummelt
Maniphest Tasks: T859
Differential Revision: https://secure.phabricator.com/D1731
Summary:
Allow tasks to be grouped by project. Since this is many-to-many and we're a little deficient on indexes for doing this on the database, we pull all matching tasks and group them in PHP. This shouldn't be a huge issue for any existing installs, though, and we can add keys when we run into one.
- When a task is in multiple projects, it appears under multiple headers.
- When a query has a task filter, those projects are omitted from the grouping (they'd always show everything, which isn't useful). Notably, if you search for "Differential", you can now see "Bugs", "Feature Requests", etc.
Test Plan: Selected "Group by: Project".
Reviewers: btrahan, Josereyes
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T923
Differential Revision: https://secure.phabricator.com/D1953
Summary:
Improve the custom query interface:
- Allow search for tasks not in projects.
- Allow search for tasks with no projects.
- Allow custom search to include author/owner constraints.
Test Plan: Searched for various sorts of tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T911
Differential Revision: https://secure.phabricator.com/D1722
Summary:
This limits a maniphest task query to only contain certain ids set
by the tasks query parameter.
Test Plan:
none yet, i wrote this at a computer with no phabricator
install while bored and eating dinner.
Reviewers: skrul, epriestley
Reviewed By: epriestley
CC: aran, davidreuss, epriestley, skrul
Differential Revision: 1137
Summary: We decided to move away from driving everything through the search
engine since it doesn't scale terribly well, so use ManiphestTaskQuery instead.
Also link the open count and tweak some display stuff.
Test Plan: Looked at project list, clicked open tasks link
Reviewed By: tuomaspelkonen
Reviewers: cadamo, aran, jungejason, tuomaspelkonen
CC: aran, tuomaspelkonen
Differential Revision: 608
Summary:
People want to see all the tasks they have subscribed to in one
view. A new table was added for this to make queries faster.
Test Plan:
Tested that the view was initially empty. After running the
reindex_maniphest.php script, I saw the correct tasks there. Added
myself as a subscriber to one task and made sure the view was
updated. Removed myself as a subscriber from one task and made sure
the view was updated again.
Reviewed By: epriestley
Reviewers: epriestley, jungejason, codeblock
CC: aran, rm, epriestley
Differential Revision: 603
Summary:
Major things taking place here:
- A new table for storing <task, project> relationships.
- Moved all task query logic into a dedicated class.
- Added a "projects" filter to the UI.
I was originally going to try to drive this off the main search index but the
perf benefits of a custom schema make an overwhelming argument in favor of doing
it this way.
Test Plan:
Filtered tasks by author and owner and zero, one, and more than one project.
Exercised all the group/sort options. Ran the index script over my 100k task
corpus. Edited task-project membership and verified the index updated.
Reviewed By: cadamo
Reviewers: gc3, jungejason, cadamo, tuomaspelkonen, aran
CC: aran, cadamo, epriestley
Differential Revision: 556
