Summary:
Fixes T12013. Send either "Content-Length" or enable output compression, but not both.
Prefer compression for static resources (CSS, JS, etc).
Test Plan: Ran `curl -v ...`, no longer saw responses with both compression and `Content-Length`.
Reviewers: chad, avivey
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T12013
Differential Revision: https://secure.phabricator.com/D17045
Summary: Allows users set an icon (for reuse on upcoming home) for their dashboard based on 16 descriminating choices.
Test Plan: Create a new dashboard, set new icon. Edit an existing dashboard, set icon.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17042
Summary: Adds authorPHID to panels so we can default to the panels you made.
Test Plan: Run upgrade, visit manage panels, see my panels. Create a new panel. Edit a panel.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17036
Summary: Adds an authorPHIDs, populates olds ones.
Test Plan: Make a new Dashboard, see that I created it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17022
Summary: Ref T571. This was accidentally left behind in D12266.
Test Plan: Used {key command F} to search for "bulk".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T571
Differential Revision: https://secure.phabricator.com/D17034
Summary: Fixes T11999. These are actual panels (SettingsPanel) which are panelley so it's OK.
Test Plan: Clicked "Customize Menu..." on Home.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11999
Differential Revision: https://secure.phabricator.com/D17032
Summary: Cleans up the UI on the page here, uses two column layout, places actions as actionlist instead of dropdown. Changes edit pages to dialogs.
Test Plan: Add an application, divider, link, and facts to a menu page.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17030
Summary:
I'm about 90% sure this fixes the intermittent test failure on `testObjectSubscribersPolicyRule()` or whatever.
We use `spl_object_hash()` to identify objects when passing hints about policy changes to policy rules. This is hacky, and I think it's the source of the unit test issue.
Specifically, `spl_object_hash()` is approximately just returning the memory address of the object, and two objects can occasionally use the same memory address (one gets garbage collected; another uses the same memory).
If I replace `spl_object_hash()` with a static value like "zebra", the test failure reproduces.
Instead, sneak an object ID onto a runtime property. This is at least as hacky but shouldn't suffer from the same intermittent failure.
Test Plan: Ran `arc unit --everything`, but I never got a reliable repro of the issue in the first place, so who knows.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17029
Summary: Ref T11957.
Test Plan:
- Viewed an existing project profile.
- Viewed a user profile.
- Created a new project.
- Edited a profile menu.
- Added new profile items.
- Grepped for renamed symbols.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11957
Differential Revision: https://secure.phabricator.com/D17028
Summary:
Ref T11957. This renames the Configuration storage, transaction, query, and PHID type.
No rename on the actual menu item types yet, that's next (and should be the end of this, I think).
Test Plan:
- Viewed projects.
- Viewed profiles.
- Edited a project menu.
- Grepped for all renamed symbols, I think?
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11957
Differential Revision: https://secure.phabricator.com/D17027
Summary:
- Fixes T11995. This got moved but I missed renaming this callsite.
- Fixes T11993. If you have valid credentials, but haven't run `storage upgrade` yet, we can hit this exception during setup. Just ignore it instead.
Test Plan:
- Saved global settings, no more fatal.
- Changed `storage-namespace` to junk, loaded web UI with valid database credentials.
{F2106358}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11993, T11995
Differential Revision: https://secure.phabricator.com/D17024
Summary: Allows applications to be added as profile menu items
Test Plan: Add an application to a project, see menu item, click on menu. Uninstall application, see menu without application.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17016
Summary: Fixes T11982. If an install is not public, the registering user may not be able to see the inviting user.
Test Plan: {F2097656}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11982
Differential Revision: https://secure.phabricator.com/D17015
Summary: Fixes T11544. Attempt to detect if we're on a tiny, burstable-CPU AWS instance and complain.
Test Plan:
- Completely faked this locally.
- Hit the URI on an EC2 instance to check that it's correct (got back "m3.large", since that was the instance class).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11544
Differential Revision: https://secure.phabricator.com/D17014
Summary:
Fixes T11955. Currently, milestones have an internal name of "Parent (Milestone) ...".
This makes them look like they're prefix matches for "Parent", but they're actually prefix matches for "Milestone".
Reorder the names so that the internal name is "Milestone Parent ...".
Test Plan: Created a project "AAA" with milestone "BBB". Searched for "AAA", found "AAA" and milestone "AAA (BBB)".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11955
Differential Revision: https://secure.phabricator.com/D17013
Summary:
Fixes T11955. Milestone names are currently tokenizing and indexing awkwardly. For example, "A (B C D)" becomes the tokens "A", "(B", "C" and "D)".
The token "(B" can't be searched for since "(" is tokenized on the client.
Instead, tokenize "A (B C D)" into "A", "B", "C", "D".
Test Plan:
- Added unit tests.
- Used `bin/search index --type project --force` to reindex.
- Searched for "A", "B", "C", "D", etc., for real examples.
- Now, found milestones more consistently.
- Also serached for `viewer()`, `members()`, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11955
Differential Revision: https://secure.phabricator.com/D17012
Summary:
Ref T11553. With some regularity, users make various configuration mistakes which we can detect by making a request to ourselves.
I use a magical header to make this request because we want to test everything else (parameters, path).
- Fixes T4854, probably. Tries to detect mod_pagespeed by looking for a header. This is a documentation-based "fix", I didn't actually install mod_pagespeed or formally test this.
- Fixes T6866. We now test for parameters (e.g., user somehow lost "QSA").
- Ref T6709. We now test that stuff is decoded exactly once (e.g., user somehow lost "B").
- Fixes T4921. We now test that Authorization survives the request.
- Fixes T2226. Adds a setup check to determine whether gzip is enabled on the web server, and attempts to enable it at the PHP level.
- Fixes `<space space newline newline space><?php` in `preamble.php`.
Test Plan: Tested all of these setup warnings, although mostly by faking them.
Reviewers: joshuaspence, chad
Reviewed By: chad
Subscribers: Korvin
Maniphest Tasks: T4854, T4921, T6709, T6866, T11553, T2226
Differential Revision: https://secure.phabricator.com/D12622
Summary:
Ref T11954. In cluster configurations, we get repository information by making HTTP calls over Conduit.
These are slower than local calls, so clustering imposes a performance penalty. However, we can use futures and parallelize them so that clustering actually improves overall performance.
When not running in clustered mode, this just makes us run stuff inline.
Test Plan:
- Browsed Git, Mercurial and Subversion repositories.
- Locally, saw a 700ms wall time page drop to 200ms.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D17009
Summary:
Fixes T11960. In D16998 I removed some code which validated settings on read to improve performance, but lost this replacement validation in shuffling the patch stack.
This restores similar validation before we write the cache. This has the same effect, it's just faster.
Also, bump the cache key to wipe out anything that got bitten (like my account on `secure` rendering dates wrong).
Test Plan:
- Edited settings, verified the edits held.
- Faked invalid settings, saw the check throw exceptions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11960
Differential Revision: https://secure.phabricator.com/D17008
Summary:
Ref T11954. Especially with higher-latency file stores like S3, we can spend a lot of time reading README data and then pulling it out of file storage.
Instead, cache it.
Test Plan: Browsed a repostory with a README, saw faster pages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D17002
Summary:
Ref T11954. This is kind of complex and I'm not sure I want to actually land it, but it gives us a fairly good improvement for clustered repositories so I'm leaning toward moving forward.
When we make (or receive) clustered repository requests, we must first load a bunch of stuff out of Almanac to figure out where to send the request (or if we can handle the request ourselves).
This involves several round trip queries into Almanac (service, device, interfaces, bindings, properties) and generally is fairly slow/expensive. The actual data we get out of it is just a list of URIs.
Caching this would be very easy, except that invalidating the cache is difficult, since editing any binding, property, interface, or device may invalidate the cache for indirectly connected services and repositories.
To address this, introduce `PhabricatorCacheEngine`, which is an extensible engine like `PhabricatorDestructionEngine` for propagating cache updates. It has two modes:
- Discover linked objects (that is: find related objects which may need to have caches invalidated).
- Invalidate caches (that is: nuke any caches which need to be nuked).
Both modes are extensible, so third-party code can build repository-dependent caches or whatever. This may be overkill but even if Almanac is the only thing we use it for it feels like a fairly clean solution to the problem.
With `CacheEngine`, make any edit to Almanac stuff propagate up to the Service, and then from the Service to any linked Repositories.
Once we hit repositories, invalidate their caches when Almanac changes.
Test Plan:
- Observed a 20-30ms performance improvement with `ab -n 100`.
- (The main page making Conduit calls also gets a performance improvement, although that's a little trickier to measure directly.)
- Added debugging code to the cache engine stuff to observe the linking and invalidation phases.
- Made invalidation throw; verified that editing properties, bindings, etc, properly invalidates the cache of any indirectly linked repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D17000
Summary:
Ref T11954. This reduces how much work we need to do to load settings, particularly for Conduit (which currently can not benefit directly from the user cache, because it loads the user indirectly via a token).
Specifically:
- Cache builtin defaults in the runtime cache. This means Phabricator may need to be restarted if you change a global setting default, but this is exceptionally rare.
- Cache global defaults in the mutable cache. This means we do less work to load them.
- Avoid loading settings classes if we don't have to.
- If we missed the user cache for settings, try to read it from the cache table before we actually go regenerate it (we miss on Conduit pathways).
Test Plan: Used `ab -n100 ...` to observe a ~6-10ms performance improvement for `user.whoami`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D16998
Summary:
Ref T11954. I want to store some lists/arrays in the mutable (database) cache, but it only supports string storage.
Provide a serializing wrapper which flattens when values are written and expands them when they're read.
Test Plan: Used by D16997. See that revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D16999
Summary:
Ref T11954. When we query for Conduit tokens, we load the associated objects (users) by PHID.
Currently, querying objects by PHID requires us to load every PHIDType class, when we can know which specific classes we actually need (e.g., just `UserPHIDType`, if only user PHIDs are present in the query).
Use PhabricatorCachedClassMapQuery to reduce the number of classes we load on this pathway.
Test Plan:
- Used `ab -n100` to roughly measure a ~5% performance improvement?
- This measurement feels a little flimsy but the XHProf profile is cleaner, at least.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D16997
Summary: Ref T11954. This old query class can use slightly more modern code.
Test Plan: Ran Conduit methods, verified results are unchanged.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D16996
Summary: Ref T11954. Depends on D16994. This implements the Conduit method cache described in that revision for a small global Conduit performance improvement.
Test Plan: Verified Conduit has the same behavior at lower cost. See D16994 for details.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D16995
Summary:
Ref T11954. Depends on D16993. We have a couple of "look up the class for this key" queries which are costly enough to show up on a profile.
These aren't huge wins, but they're pretty easy. We currently do this like this:
```
$class_map = load_every_subclass();
return idx($class_map, $key);
```
However, we don't need to load EVERY subclass if we're only looking for, say, the Conduit method subclass which implements `user.whoami`. This allows us to cache that map and find the right class efficiently.
This cache is self-validating and completely safe even in development.
Test Plan:
- Used `curl` to make queries to `user.whoami`, verified that content was identical before and after the change.
- Used `ab -n100` to roughly measure 99th percentile time, which dropped from 74ms to 65ms. This is a small improvement (13% in the best case, here) but it benefits every Conduit method call.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D16994
Summary:
Ref T11954. Depends on D16992. We have some data which can be generated and cached at runtime. Three examples are:
- Class map from Conduit method names to implementing classes.
- Class map from PHID types to implementing classes.
- The main routing map.
None of these are huge wins but they impose global costs and can be shaved down through caching without introducing an enormous amount of new complexity.
The cost to these maps is that sometimes you'll need to restart your webserver, even in development mode if these caches are active. However, in some cases these changes are very rare, and in other cases we can just leave the cache disabled in development mode without a huge complexity cost.
Specifically, the Conduit/PHID type class maps are self-validating and can not go bad, even in development mode.
The routing map will be able to, but I plan to just disable it in development mode.
This provides a general-purpose pure APC cache stack for storing this data.
Test Plan: See future changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D16993
Summary: Ref T929. When viewing a branch, show a few recent differences from the default branch (usually, "master").
Test Plan: {F2079220}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T929
Differential Revision: https://secure.phabricator.com/D16991
Summary: Ref T929. We've made some UI updates since D15330.
Test Plan: {F2079125}
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T929
Differential Revision: https://secure.phabricator.com/D16990
Summary:
This shows the commits list only (Actual `git diff` will show up at a later date).
The inputs are left as text-fields, to allow the form to accept anything that can be resolved. The form is GET, to allow sharing URIs.
The conduit method response array is compatible with that of `diffusion.historyquery`, to make it easy to build
the "history" table.
The hardest part here was, of course, Naming. I think "from" and "onto" are unconfusing, and I'm fairly confident that the "to merge"
instructions are in sync with the actual content of the page.
Test Plan: Look at several "compare" views, with various values of "from" and "onto".
Reviewers: #blessed_reviewers!, epriestley
Subscribers: caov297, 20after4, Sam2304, reardencode, baileyb, chad, Korvin
Maniphest Tasks: T929
Differential Revision: https://secure.phabricator.com/D15330
Summary:
Persona is going to be decommed November 30th, 2016.
It is highly unlikely that anyone is currently using persona as a real
login method at this point.
Test Plan: tried locally to add auth adapter.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16371
Summary:
Fixes T11940. In 2.11.0, Git has made a change so that newly-pushed changes are held in a temporary area until the hook accepts or rejects them.
This magic temporary area is only readable if the appropriate `GIT_ENVIRONMENTAL_MAGIC` variables are available. When executing `git` commands, pass them through from the calling context.
We're intentionally conservative about which variables we pass, and with good reason (see "httpoxy" in T11359). I think this continues to be the correct default behavior.
Test Plan:
- Upgraded to Git 2.11.0.
- Tried to push over SSH, got a hook error.
- Applied patch.
- Pulled and pushed over SSH.
- Pulled and pushed over HTTP.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11940
Differential Revision: https://secure.phabricator.com/D16988
Summary:
Ref T11939. IPv4 addresses can normally only be written in one way, but IPv6 addresses have several formats.
For example, the addresses "FFF::", "FfF::", "fff::", "0ffF::", "0fFf:0::", and "0FfF:0:0:0:0:0:0:0" are all the same address.
Normalize all addresses before writing them to logs, etc, so we store the most-preferred form ("fff::", above).
Test Plan:
Ran an SSH clone over IPv6:
```
$ git fetch ssh://local@::1/diffusion/26/locktopia.git
```
It worked; verified that address read out of `SSH_CLIENT` sensibly.
Faked my remote address as a non-preferred-form IPv6 address using `preamble.php`.
Failed to login, verified that the preferred-form version of the address appeared in the user activity log.
Made IPv6 requests over HTTP:
```
$ curl -H "Host: local.phacility.com" "http://[::1]/"
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11939
Differential Revision: https://secure.phabricator.com/D16987
Summary:
Ref T11939. Depends on D16984. Now that CIDRLists can contain IPv6 addresses, blacklist all of the reserved IPv6 space.
This reserved blacklist is used to prevent users from accessing internal services via "Import Calendar" or "Add Macro".
They can't actually reach IPv6 addresses via these mechanisms yet because we need to do more work to support outbound IPv6 requests, but make sure reserved IPv6 space is blacklisted already when that support eventaully arrives.
Also, clean up some error messages (e.g., for trying to hit a bad URI in "Add Macro").
Test Plan:
- Loaded pages with default blacklist.
- Tried to make requests into IPv6 space.
- Currently, this is impossible because of `parse_url()` and `gethostynamel()` calls.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11939
Differential Revision: https://secure.phabricator.com/D16986
Summary: The default behavior of these methods is to return `true`, so these overrides have no effect.
Test Plan: `grep`; poked around.
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Differential Revision: https://secure.phabricator.com/D16985
Summary:
Fixes T11946. When a logged-out viewer is loading a page on a non-public install, there are two policy issues which prevent them from loading global settings:
- They can not see the Settings application itself.
- They can not see the global settings object.
Allow them to see Settings by making mandatory applications always visible. (This doesn't make any application pages public.)
Allow them to see the global settings object explicitly.
Test Plan:
Changed default language, viewed logged-out page:
{F2076924}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11946
Differential Revision: https://secure.phabricator.com/D16983
Summary:
Fixes T11938.
Note that there's a subcase here: if you `hg clone` or `svn checkout` a short `/source/` URI that ends in `.git`, we miss the lookup and don't get this far, so you still get a generic error message.
Hopefully it is clear enough on its own that `proto://.../blah.git` is, in fact, a Git repository, since it says ".git" at the end.
If that doesn't prove to be true, we can be more surgical about this.
Test Plan:
```
$ git clone ssh://local@localvault.phacility.com/source/quack.notgit/
Cloning into 'quack.notgit'...
phabricator-ssh-exec: This repository ("quack.notgit") is not a Git repository. Use "hg" to interact with this repository.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
```
```
$ hg clone ssh://local@localvault.phacility.com/source/phabx
remote: phabricator-ssh-exec: This repository ("phabx") is not a Mercurial repository. Use "git" to interact with this repository.
abort: no suitable response from remote hg!
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11938
Differential Revision: https://secure.phabricator.com/D16976
Summary: Ref T11801. In some cases, this could lead to us failing to generate the first recurrence in a series.
Test Plan: Imported `weekly.ics` (from D16974) and saw an event correctly occur on Aug 18, with my local timezone set to "America/Los_Angeles".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11801
Differential Revision: https://secure.phabricator.com/D16975
Summary:
Fixes T11936. After editing a repository URI, we were not correctly updating the URI index.
Any other edit to the repository //would// update the index, and this index is only really used by `arc` to figure out which repository a working copy belongs to, so that's how this evaded detection for this long. In particular, creating a repository would usually have an edit after any URI edits, to activate it, which would build the index correctly.
Test Plan:
- Added a new URI to a repository.
- Verified it was immediately reflected in the `repository_uriindex` table.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11936
Differential Revision: https://secure.phabricator.com/D16972
Summary:
Ref T11922. When we deploy on Saturday I need to rebuild all the cluster indexes, but some instances won't have anything indexed so they won't actually trigger the activity.
Add a `--force` flag that just clears an activity even if the activity is not required.
Test Plan: Ran `bin/config done reindex --force` several times.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11922
Differential Revision: https://secure.phabricator.com/D16970
Summary:
Currently, custom Sites must match `.*` or similar to handle 404's, since the fallback is always generic.
This locks them out of the "redirect to canonicalize to `path/` code", so they currently have a choice between a custom 404 page or automatic correction of `/`.
Instead, allow the 404 controller to be constructed explicitly. Sites can now customize 404 by implementing this method and not matching everything.
(Sites can still match everything with a catchall rule if they don't want this behavior for some reason, so this should be strictly more powerful than the old behavior.)
See next diff for CORGI.
Test Plan:
- Visited real 404 (like "/asdfafewfq"), missing-slash-404 (like "/maniphest") and real page (like "/maniphest/") URIs on blog, main, and CORGI sites.
- Got 404 behavior, redirects, and real pages, respectively.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16966
Summary:
Ref T11922. After updating to HEAD of `master`, you need to manually rebuild the index. We don't do this during `bin/storage upgrade` because it can take a very long time (`secure.phabricator.com` took roughly an hour) and can happen while Phabricator is running.
However, if we don't warn users about this they'll just get a broken index unless they go read the changelog (or file an issue, then we tell them to go read the changelog).
This adds a very simple table for notes to administrators so we can write a "you need to go rebuild the index" note, then adds one.
Administrators clear the note by completing the activity and running `bin/config done reindex`. This isn't automatic because there are various strategies you can use to approach the issue, which I'll discuss in greater detail in the linked documentation.
Also, fix an issue where `bin/storage upgrade --apply <patch>` could try to re-mark an already-applied patch as applied.
Test Plan:
- Ran storage ugrades.
- Got instructions to rebuild search index.
- Cleared instructions with `bin/config done reindex`.
Reviewers: chad
Reviewed By: chad
Subscribers: avivey
Maniphest Tasks: T11922
Differential Revision: https://secure.phabricator.com/D16965
Summary: This is still reasonably functional and useful to people, and we don't have better mechanics to offset the change.
Test Plan: New Workboard, set Workboard color, test mobile, desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16964
Summary:
Fixes T11929. When running with a query, we no longer enforce an order on the subquery join to produce results more quickly when searching for common strings.
However, this means that empty queries (like those issued by "Close as Duplicate") don't order subquery results.
Restore a `dateCreated` order if there is no query text.
Test Plan: Artificially set limit to 10, still saw 10 most recent tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11929
Differential Revision: https://secure.phabricator.com/D16960
Summary:
Fixes T11909. Ref T11816. Instead of offering a dropdown with choices between "Edit/Cancel/Reinstate This Event" and "Edit/Cancel/Reinstate Future Events", make the choice more explicit.
This dialog ends up pretty wordy but this edit is rare, so I think that's alright.
Test Plan: {F2046863}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816, T11909
Differential Revision: https://secure.phabricator.com/D16956
Summary:
Ref T11816. Currently, if someone in California creates an event and then someone in New York edits it, we generate a no-op "<user> changed the start time from 3PM to 3PM." transaction.
This is because the internal timezone of the event is changing, but the actual absolute time is not.
Instead, when an edit wouldn't reschedule an event and would only change the internal timezone, ignore the edit.
Test Plan:
- Edited non-all-day events in PST / EST with out making changes (ignored).
- Edited non-all-day events in PST / EST with changes (changes worked).
- Performed the same edits with all-day events, which also were ignored and worked, respectively.
- Pulled events in and out of all-day mode in different timezones, behavior seemeed reasonable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16955
Summary:
Ref T11816. I don't really know what happened here, maybe I rewrote and broke this at the last second?
In most cases, we directly respect the `isAllDay` flag on the event, so the internal date state doesn't matter too much.
However, in the case of mail notifications, the raw internal state is relevant. This should fix mail notifications for all-day events.
(I might still turn them off since I'm not sure they're too useful, but it's good to have them working.)
Test Plan:
- Created a new all-day event, verified database values wrote correctly.
- Ran `bin/calendar notify --trace`, verified it picked up an all-day event tomorrow with a large enough `--minutes` value.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16954
Summary: Spruce up the file embeds a little more, hover state, icons, file size.
Test Plan:
Add a psd and pdf, see new icons. Check differential, still see icons there too. Test mobile, desktop.
{F2042539}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16950
Summary: Found these in the `secure` error logs: one bad call, one bad column.
Test Plan: Searched for empty string. Double-checked method name.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16948
Summary:
Ref T6740. When we index a document, also save a copy of the stemmed version.
When querying, search the combined corpus for the terms.
(We may need to tune this a bit later since it's possible for literal, quoted terms to match in the stemmed section, but I think this wil rarely cause issues in practice.)
A downside here is that search sort of breaks if you upgrade into this and don't reindex. I wasn't able to find a way to issue the query that remained compatible with older indexes and didn't have awful performance, so my plan is:
- Put this on `secure`.
- Rebuild the index.
- If things look good after a couple of days, add a way that we can tell people they need to rebuild the search index with a setup warning.
We might get some reports between now and then, but if this is super awful we should know by the end of the weekend.
Test Plan:
WOW AMAZING
{F2021466}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6740
Differential Revision: https://secure.phabricator.com/D16947
Summary: Ref T11741. I'll wait until the release cut to land this; it just adds a test for InnoDB FULLTEXT being available instead of always returning `false`.
Test Plan:
- Ran with InnoDB fulltext locally for a day and a half without issues.
- Ran `bin/storage upgrade`, saw it detect InnoDB fulltext.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11741
Differential Revision: https://secure.phabricator.com/D16946
Summary:
Ref T6740. Currently, we issue fulltext queries with an "ORDER BY <score>" on the entire result set.
For very large result sets, this can require MySQL to do a lot of work. However, this work is generally useless: if you search for some common word like "diff" or "internet" or whatever and match 4,000 documents, the chance that we can score whatever thing you were thinking of at the top of the result set is nearly nothing. It's more useful to return quickly, and let the user see that they need to narrow their query to get useful results.
Instead of doing all that work, let MySQL find up to 1,000 results, then pick the best ones out of those.
This actual change is a little flimsy, since our index isn't really big enough to suffer indexing issues. However, searching for common terms on my local install (where I have some large repositories imported and indexed) drops from ~40ms to ~10ms.
My hope is to improve downstream performance for queries like "translatewiki" here, particularly:
<https://phabricator.wikimedia.org/T143863>
That query matches about 300 trillion documents but there's a ~0% chance that the one the user wants is at the top. It takes a couple of seconds to execute, for me. Better to return quickly and let the user refine their results.
I think this will also make some other changes related to stemming easier.
This also removes the "list users first" ordering on the query, which made performance more complicated and seems irrelevant now that we have the typeahead.
Test Plan:
- Searched for some common terms like "code" locally, saw similar results with better performance.
- Searched for useful queries (e.g., small result set), got identical results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6740
Differential Revision: https://secure.phabricator.com/D16944
Summary:
Ref T11741. This makes everything work if we switch to InnoDB, but never actually switches yet.
Since the default minimum word length (3) and stopword list (36 common English words) in InnoDB are generally pretty reasonable, I just didn't add any setup advice for them. I figure we're better off with simpler setup until we identify some real problem that the builtin stopwords create.
Test Plan: Swapped the `false` to `true`, ran `storage adjust`, got InnoDB fulltext indexes, searched for stuff, got default "AND" behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11741
Differential Revision: https://secure.phabricator.com/D16942
Summary:
Ref T11741. On recent-enough versions of MySQL, we would prefer to use InnoDB for fulltext indexes instead of MyISAM.
Allow `bin/storage adjust` to read actual and expected table engines, and apply adjustments as necessary.
We have one existing bad table that uses the wrong engine, `metamta_applicationemail`. This change corrects that table.
Test Plan:
- Ran `bin/storage upgrade`.
- Saw the adjustment phase apply this change properly:
```
>>>[463] <query> ALTER TABLE `local_metamta`.`metamta_applicationemail` COLLATE = 'utf8mb4_bin', ENGINE = 'InnoDB'
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11741
Differential Revision: https://secure.phabricator.com/D16941
Summary:
Ref T11741. InnoDB uses a stopwords table instead of a stopwords file.
During `storage upgrade`, synchronize the table from the stopwords file on disk.
Test Plan:
- Ran `storage upgrade`.
- Ran `select * from stopwords`, saw stopwords.
- Added some garbage to the table.
- Ran `storage upgrade`, saw it remove it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11741
Differential Revision: https://secure.phabricator.com/D16940
Summary:
Ref T11741. Fixes T10642. Parse and compile user queries with a consistent ruleset, then submit queries to the backend using whatever ruleset MySQL is configured with.
This means that `ft_boolean_syntax` no longer needs to be configured (we'll just do the right thing in all cases).
This should improve behavior with RDS immediately (T10642), and allow us to improve behavior with InnoDB in the future (T11741).
Test Plan:
- Ran various queries in the UI, saw the expected results.
- Ran bad queries, got useful errors.
- Searched threads in Conpherence.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10642, T11741
Differential Revision: https://secure.phabricator.com/D16939
Summary:
Fixes T11894. Currently, if you aren't attending any events for a while, we can cache that you are free for the next 72 hours, even if you have an event in a few hours.
Instead, only cache "user is free" until the next event, if one exists.
Test Plan: Dumped cache TTLs, saw 52 minutes instead of ~4300 minutes with a near-upcoming event.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11894
Differential Revision: https://secure.phabricator.com/D16937
Summary: Fixes T11917. Give logged-out / omnipotent users the global settings, not the default settings.
Test Plan: Changed applications and language, logged out, saw changes as a public user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11917
Differential Revision: https://secure.phabricator.com/D16936
Summary:
Currently, when a payment method is invalid we still render the full name and let you save the form without making changes. This can be confusing.
Instead:
- Render "<Deleted Payment Method>", literally.
- Render an error immediately.
- Prevent the form from being saved without changing the method.
Test Plan: {F1955487}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16935
Summary:
Ref T11044. This is still catching the older exceptions, which are now more general.
If you loaded the web UI without MySQL running, this meant you got a less-helpful error.
Test Plan: Stopped MySQL, loaded web UI, got a more-helpful error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16930
Summary: Fixes T11845. Users can still embed a text panel on the home page to give it some ambiance.
Test Plan: Wrote an autoplay video as a comment, saw it in feed. Before change: autoplay. After change: no auto play. On task: still autoplay.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11845
Differential Revision: https://secure.phabricator.com/D16920
Summary: Fixes T11910. I spent a couple of minutes looking for the root cause without much luck, but this will all be obsoleted by an eventual upgrade to `EditEngine` anyway.
Test Plan: Set and unset "Wait for Message", which now worked.
Reviewers: chad, avivey
Reviewed By: avivey
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11910
Differential Revision: https://secure.phabricator.com/D16919
Summary: Removes the viewable restriction on embedded files. Builds a basic lightbox UI for commenting.
Test Plan:
Add psd, pdf to Maniphest task, clicked on download, comment, left comment. Closed box.
{F1943726}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3612
Differential Revision: https://secure.phabricator.com/D16917
Summary:
Ref T11044. Few issues here:
- The `PhutilProxyException` is missing an argument (hit this while in read-only mode).
- The `$ref_key` is unused.
- When you add a new master to an existing cluster, we can incorrectly apply `.php` patches which we should not reapply. Instead, mark them as already-applied.
Test Plan:
- Poked this locally, but will initialize `secure004` as an empty master to be sure.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16916
Test Plan: `arc unit`, see test name in list.
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16915
Summary:
Ref T11044. This was old Facebook cruft for reading configuration from SMC (and maybe doing some other questionable things). See D183.
(See also D175 for discussion of this from 2011.)
In modern Phabricator, you can subclass `SiteConfig` to provide dynamic configuration, and we do so in the Phacility cluster. This lets you change any config, and change in response to requests (e.g., for instancing) and is generally more powerful than this mechanism was.
This configuration provider theoretically let you roll your own replication or partitioning, but in practice I believe no one ever did, and no one ever could have anyway without more support in the upstream (for migrations, read-after-write, etc).
Test Plan:
- Grepped for removed option.
- Browsed around with clustering off.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16911
Summary:
Ref T11044. One popular tool in a modern operations environment is Puppet. The primary purpose of this tool is to randomly revert hosts to older or different configurations.
Introducing an element of chaotic unpredictability into operations trains staff to be on high alert at all times, rather than lulled into complacency by predictability or consistency.
When Puppet reverts a Phabricator host's configuration to an older version, we might start writing data to a lot of crazy places where it shouldn't go. This will create a big sticky mess that is virtually impossible to undo, mostly because we'll get two files with ID 123 or two tasks with ID 456 or whatever else and good luck with that.
Instead, after changing the partition layout, require `bin/storage partition` to be run. This writes a copy of the config everywhere.
Then, when we start serving web requests, make sure every database has the exact same config. This will foil Puppet by refusing to run requests on hosts it has reverted.
Test Plan:
- Changed partition configuration.
- Ran Phabricator.
- FOILED!
- Ran `bin/storage partition` to sync config.
- Things worked again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16910
Summary:
Ref T11044. Fixes T10931. This option has essentially never been useful for anything, and we've picked the best implementation for a long time (MySQLi if available, MySQL if not).
I am not aware of any reason to ever set this manually. If someone comes up with some bizarre but legitimate use case that I haven't thought of, we can modularize it.
Test Plan: Browsed around. Grepped for `mysql.implementation`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10931, T11044
Differential Revision: https://secure.phabricator.com/D16909
Summary: Adds a comment box, you can put text into it, hit enter, and see it come back.
Test Plan: Put text into box, see it come back.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3612
Differential Revision: https://secure.phabricator.com/D16907
Summary:
Fixes T10759. Fixes T11817. This runs all the general sanity/configuration checks on all the active servers.
None of these warnings are very important, and this doesn't change any logical stuff.
Depends on D16904.
Test Plan: Painstakingly triggered each warning, verified that they rendered correctly and that messages told me which host was affected.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759, T11817
Differential Revision: https://secure.phabricator.com/D16905
Summary:
Ref T10759. Check master/replica status during startup.
After D16903, this also means that we check this status after a database comes back online after being unreachable.
If a master is replicating, fatal (since this can do a million kinds of bad things).
If a replica is not replicating, warn (this just means the replica is behind so some data is at risk).
Also: if your masters were actually configured properly (mine weren't until this change detected it), we would throw away patches as we applied them, so they would only apply to the //first// master. Instead, properly apply all migration patches to all masters.
Test Plan:
- Started Phabricator with a replicating master, got a fatal.
- Stopped replication on a replica, got a warning.
- With two non-replicating masters, upgraded storage.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16904
Summary:
Ref T10759. We may "discover" the presence of a fatal setup error later, after starting Phabricator.
This can happen in a few ways, but most are unlikely. The one I'm immediately concerned about is:
- Phabricator starts up during a disaster with some databases unreachable.
- We start with warnings (unreachable databases are generally not fatal, since it's OK for some subset of hosts to be down in replicated/partitioned setups).
- The unreachable databases later recover and become accessible again.
- When we run checks against them, we discover that they are misconfigured.
Currently, "fatal" setup issues are not truly fatal if we're "in flight" -- we've survived setup checks at least once in the past. This is bad in the scenario above.
Especially with partitioning, it could lead to mangled data in a disaster scenario where operations staff makes a small configuration mistake while trying to get things running again.
Instead, if we "discover" a fatal error while already "in flight", reset the whole setup process as though the webserver had just restarted. Don't serve requests again until we can make it through setup without hitting fatals.
Test Plan:
- Started Phabricator with multiple masters, one of which was down and broken.
- Got a warning about the bad master.
- Revived the master.
- Before: Phabricator detects the fatal, but keeps serving requests.
- After: Phabricator detects the fatal, resets the webserver, and stops serving requests until the fatal is resolved.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16903
Summary:
Ref T10759. Currently, these checks run only against configured masters. Instead, check every host.
These checks also sort of cheat through restart during a recovery, when some hosts will be unreachable: they test for "disaster" by seeing if no masters are reachable, and just skip all the checks in that case.
This is bad for at least two reasons:
- After recent changes, it is possible that //some// masters are dead but it's still OK to start. For example, "slowvote" may have no master, but everything else is reachable. We can safely run without slowvote.
- It's possible to start during a disaster and miss important setup checks completely, since we skip them, get a clean bill of health, and never re-test them.
Instead:
- Test each host individually.
- Fundamental problems (lack of InnoDB, bad schema) are fatal on any host.
- If we can't connect, raise it as a //warning// to make sure we check it later. If you start during a disaster, we still want to make sure that schemata are up to date if you later recover a host.
In particular, I'm going to add these checks soon:
- Fatal if a "master" is replicating.
- Fatal if a "replica" is not replicating.
- Fatal if a database partition config differs from web partition config.
- When we let a database off with a warning because it's down, and later upgrade it to a fatal because we discover it is broken after it comes up again, fatal everything. Currently, we keep running if we "discover" the presence of new fatals after surviving setup checks for the first time.
Test Plan:
- Configured with multiple masters, intentionally broke one (simulating a disaster where one master is lost), saw Phabricator still startup.
- Tested individual setup checks by intentionally breaking them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16902
Summary:
Fixes T11902.
- Periods now work in short names.
- If you try to name something ".git", no dice.
Test Plan:
- Tried to name something "quack.git", was politely rejected.
- Named something "quack.notgit", and it worked fine.
- Cloned Mercurial and Git repositories over SSH with ".git" and non-".git" variants without hitting any issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11902
Differential Revision: https://secure.phabricator.com/D16908
Summary:
Ref T11044. I'm going to hold this until after the release cut, but I think it's good to go.
This allows installs to configure multiple masters in `cluster.databases` and partition applications across them (for example, put Maniphest on a dedicated database).
When we make a Maniphest connection we go look up which master we should be hitting first, then connect to it.
This has at least approximately been planned for many years, so the actual change is largely just making sure that your config makes sense.
Test Plan:
- Configured `db001.epriestley.com` and `db002.epriestley.com` as master/master.
- Partitioned applications between them.
- Interacted with various applications, saw writes go to the correct host.
- Viewed "Database Servers" and saw partitioning information.
- Ran schema upgrades.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16876
Summary:
Ref T8345. See T8345#201048 for discussion.
This rule (don't show mentions of or from restricted objects) is more consistent with how we render mentions in the timeline and I think generally a better behavior.
Test Plan:
- Mentioned a task on a public task and a private task.
- Privileged user (foreground) sees both.
- Public user (background) sees only the public mention.
{F1929485}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8345
Differential Revision: https://secure.phabricator.com/D16900
Summary: Basic work in progress, but should show timeline comments for files when in lightbox mode. Looks reasonable.
Test Plan: click on images, see comments from timeline.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3612
Differential Revision: https://secure.phabricator.com/D16896
Summary: Ref T11816. We currently color circles green if you're invited, but should color them green if you're attending, too.
Test Plan: Viewed calendar mobile month view, saw attending events in green.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16899
Summary:
Ref T11816. In some cases, Calendar would only export a subset of events because the "export" flag was ignored or the "display" parameter applied an improper date range to the query.
- Make sure the `export` flag gets processed, even though it isn't a "real" field on the search engine.
- Clear the "display" parameter to avoid date range windowing coming from the day/month logic.
Test Plan: Exported a "display=month" view, verified future events came with it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16898
Summary:
See downstream issue here: <https://phabricator.wikimedia.org/T150992>
In at least one case (project milestones) we have a locked, non-lockable field. This means "this is locked, and you can't change the fact that it is locked".
At least for now, preserve this behavior.
Test Plan: Created a new milestone of an existing project. This worked correctly with the patch.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16895
Summary: This supports doing a bunch of sales funnel tracking on Phacility.
Test Plan: See next diff.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16890
Summary: Ref T11034. Try to produce a roughly-one-sentence summary instead of a roughly-one-paragraph summary for the browse dialog.
Test Plan:
- Added unit tests, ran unit tests.
- Wrote a longer summary for a project, browsed to it, saw a shorter summary.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11034
Differential Revision: https://secure.phabricator.com/D16892
Summary: This code should go inside the field-locking loop. Otherwise, it only applies to the last field, and fatals if there are no fields.
Test Plan: Carefuller inspection.
Reviewers: chad
Reviewed By: chad
Subscribers: 20after4
Differential Revision: https://secure.phabricator.com/D16889
Summary:
Certain unusual queries, like `[-]`, could tokenize into a list which included the empty string.
This would then convert into a query for `... LIKE "%"` which just joins the entire table.
Instead: tokenize smarter; never return the empty token; add some test cases.
Test Plan: Ran unit tests. Queried for `[[blah blah]]`, saw a reasonable query come out the other end.
Reviewers: chad
Reviewed By: chad
Subscribers: 20after4
Differential Revision: https://secure.phabricator.com/D16888
Summary:
Ref T11887. This isn't a great fix but makes the method behave properly until I get around to a real fix.
In the longer term, I want to convert all of this pluggable Harbormaster/Drydock stuff (blueprints, artifacts, build plans) to use EditEngine + EditField instead of the weird mishmash of older/custom stuff it currently uses. However, this is a more involved project to execute and I'd like to be in that area of the codebase first so it gets adequate testing.
Until that happens, just put a reasonble-ish mechanism in place to let artifacts correct inbound types. This is the only artifact type and only parameter which needs casting.
Test Plan:
- Made a `curl` call to `harbormaster.createartifact` to create a URI artifact with `?...&ui.external=1`.
- Before patch: type error on `ui.external` not being a boolean.
- After patch: artifact created successfully.
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11887
Differential Revision: https://secure.phabricator.com/D16887
Summary:
Ref T8510. Use "\n" as a delimiter between name sections. Specifically, project "AAA" with tag "zzz" should be a better match for query "AAA" than project "AAA BBB" is.
Make use of this delimiter slighlty more obvious in the UI.
Test Plan:
- Created projects "Phacility" and "Phacility Core Access".
- Typed "Phacility".
- Before patch: first hit is "Phacility Core Access".
- After patch: first hit is "Phacility".
- Viewed debugging output table, saw visual explanation of behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8510
Differential Revision: https://secure.phabricator.com/D16886
Summary:
Fixes T11785. Lightbox calls `JX.Stratcom.pass()` to let other handlers react, but should not. At least today, we never put, e.g., links inside a lightbox.
This code appears in the original commit so it was probably just copy/pasted from somewhere and I missed it in review.
(Or there's some edge case I'm not thinking of and we'll figure it out soon enough.)
Additionally, blacklist `/file/data/` from Quicksand naviagtion: Quicksand should never fetch these URIs.
Test Plan:
- Disabled `security.alternate-file-domain`.
- Enabled Quicksand ("Persistent Chat").
- Clicked an image thumbnail on a task.
- Repeated that until things flipped out a bit.
- After the patch: no issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11785
Differential Revision: https://secure.phabricator.com/D16884
Summary: Visually, I think these are much cleaner (with colors), and provide more workspace. I also don't really use the sidenav here and if I did, it would be to go back to the project homepage. I think this is overall better. If navigation page to project home is difficult or hard to find, we can maybe make a better header / crumbs bar to reduce that.
Test Plan: New project -> basic new board. Existing project -> color board. Desktop, Mobile, Fullscreen
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16882
Summary: Ref T11816. This could be a little cleaner, but we currently have two copies of the logic. Get them using the same code. Once that's actually working I can go make the code a little prettier.
Test Plan: Viewed Calendar month view tooltips, saw the same values as subheaders.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16880
Summary:
Ref T11816.
- Host gets weird behavior around defaulting to the viewer.
- Invitees get weird behavior around defaulting to the viewer.
- "All Day" is just sort of weird since start / end date aren't customizable.
- Recurring/Frequency are weird here and don't make much sense.
I can't immediately come up with reasons that any of these are particularly useful/valuable to default. More of them can be made editable after T10222 gets sorted out.
Test Plan: Edited edit engine custom forms for Calendar events, saw a more sensible list of customizable fields (e.g., policy stuff).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16878
Summary: Uh, non-all-day-events said 1:30 - 2:29 PM, which is real silly.
Test Plan: Looked at a non-all-day-event.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16874
Summary: Adds a headerimage and lets you set it on posts for added reverence. Is that a word?
Test Plan:
Add an image, see an image.
{F1923010}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16873
Summary:
Fixes T11809. Ref
- Explicitly document the summary icon hints -- I don't think these are too hard to figure out (and maybe this stuff should just go in the tooltips) but we can start here.
- Use color + shape to distinguish between "cancelled" and "declined", not just color (for users with vision accessibility issues).
- Translate a "minute(s)" string into sensible English.
- Use RSVP status on the month view green circle thing.
Test Plan:
- Read docs.
- Looked at month view.
- Read reminder mail.
- Viewed month view mobile view.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16872
Summary:
Ref T11816. Since the dashboard got updated, Differential now interprets "Responsible Users: epriestley" to mean "epriestley, or any project or package epriestley is part of". You can query for just "epriestley" with "exact(epriestley)".
Give Calendar invites the same behavior: "epriestley" means "any event epriestley is invited to, or a project they are a member of is invited to". Individual invites can be queried with "exact(epriestley)".
This is a little bit copy-pastey but I want to wait for a third use case to clean it up since I think I'm going to have to do a bunch of generalization around "how does an individual PHID get turned into a bunch of PHIDs".
Test Plan: Queried for "Invited: dog", "invited: viewer", "invited; exact(dog)", etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16870
Summary: No view engine yet (adding header image next), but adds subtitle to display like PhameBlog
Test Plan: Add a subtitle, remove a subtitle.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16871
Summary:
Ref T11816. Projects can be invited to an event, but the UI is currently fairly agnostic about them.
Instead, introduce the idea of "RSVPs", which are basically invites for you as an individual or for any group you're a part of. When we go to check if you're invited, we check for you individually first, then check for any groups you belong to if you haven't already accepted/declined.
On the calendar detail page:
- Show the quick "Join" / "Decline" buttons if any project you're a member of is invited.
- If you're invited, highlight any projects which you're a member of to make that more clear.
On other calendar views:
- If you're invited as part of a project, show the "multiple users" icon.
- If it's just you, continue showing the "add one user" icon.
Test Plan: Viewed month view, day view, detail view. Invited groups and individuals. Invited "Dog Project", accepted invite as user "Dog".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16868
Summary:
Ref T11816. This logic was correct, we just did all the work and then mostly threw away the results. This worked correctly anyway in some timezones.
Instead, actually use `$min_date` and `$max_date`.
Test Plan: In "America/Toronto" with server in a more-western timezone, viewed a "Nov 11 - Nov 12" all-day event, saw those dates.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16867
Summary: Fixes T11867. This should really be on the `CredentialType` itself, but just punt that for now until the API endpoint gets updated. We'll need the actual code here anyway in some form.
Test Plan: {F1922728}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11867
Differential Revision: https://secure.phabricator.com/D16864
Summary: Fixes T11868. This is silly and does not make sense.
Test Plan: Edited a Phurl URL, verified mail only went to me, not to the object itself.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11868
Differential Revision: https://secure.phabricator.com/D16863
Summary:
Ref T9304. This adds a "GuidanceEngine" which can generate "Guidance".
In practice, this lets third-party code (rSERVICES) remove and replace instructions in the UI, which is basically only usefulf or us to tell users to go read the documentation in the Phacility cluster.
The next diff tailors the help on the "Auth Providers" and "Create New User" pages to say "PHACILITY PHACILITY PHACILITY PHACILITY".
Test Plan: Browed to "Auth Providers" and "Create New User" on instanced and non-instanced installs, saw appropriate guidance.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9304
Differential Revision: https://secure.phabricator.com/D16861
Summary: Fixes T11866. This got converted wrong when doing the `/source/` stuff.
Test Plan: Browsed the root directory of a Subversion repository in Diffusion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11866
Differential Revision: https://secure.phabricator.com/D16860
Summary: See D16851 - there's now a difference in their meaning, so don't unite them in the UI.
Test Plan: Load manage page of repos
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16858
Summary:
Fixes T11818. We don't discard output, so once we read more than 2GB of output we'll exceed the maximum size of a string in an internal buffer.
Instead, configure the future so output is discarded.
Test Plan: Added logging to `libphutil/`, saw internal buffer grow steadily before this change and stay constant at 0 after this change.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11818
Differential Revision: https://secure.phabricator.com/D16855
Summary: Fixes T4245. When a repository has a short name, use `/source/shortname/` as its primary URI.
Test Plan:
- Cloned Git repositories from shortnames via HTTP and SSH.
- Cloned Mercurial repositories from shortnames via HTTP and SSH.
- Cloned Subversion repositories from shortnames via SSH.
- Browsed Git, Mercurial and Subversion repositories.
- Added and removed short names to various repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D16851
Summary: Ref T11816. This got dropped somewhere along the way, so the mobile month view no longer showed a green-colored hint if a day has events you're invited to.
Test Plan: Viewed Calendar month view on mobile, saw green circles for days with invited events.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16852
Summary: Depends on D16847. Ref T11044. This updates the remaining storage-related workflows from the CLI to accommodate multiple masters.
Test Plan:
- Configured multiple masters.
- Ran all `bin/storage` workflows.
- Ran `arc unit --everything`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16848
Summary:
Depends on D16115. Ref T11044. In the brave new world of multiple masters, we need to check the schemata on each master when looking for missing storage patches, keys, schema changes, etc.
This realigns all the "check out what's up with that schema" calls to work for multiple hosts, and updates the web UI to include a "Server" column and allow you to browse per-server.
This doesn't update `bin/storage`, so it breaks things on its own (and unit tests probably won't pass). I'll update that in the next change.
Test Plan: Configured local environment in cluster mode with multiple masters, saw both hosts' status reported in web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16847
Summary:
Ref T11044. This moves toward partitioned application databases:
- You can define multiple masters.
- Convert all the easily-convertible code to become multi-master aware.
This doesn't convert most of `bin/storage` or "Config > Database (Stuff)" yet, as both are quite involved. They still work for now, but only operate on the first master instead of all masters.
Test Plan: Configured multiple masters, browsed around, ran `bin/storage` commands, ran `bin/storage --host ...`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16115
Summary: I moved and then un-moved this incorrectly in D16846.
Test Plan: Looked at the old code, which worked better.
Reviewers: jacksongabbard, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16849
Summary:
Ref T11085. To recreate the issue:
- From the web UI, click "Edit Revision".
- Write something like this as your "Summary" (i.e., put another field marker, like "Test Plan:", into the summary):
> This is a test of the
> Test Plan: field to see
> if it works.
- Save changes.
Later, when the summary is amended into a commit message, the parser will see two "Test Plan:" fields and fail to parse the message.
Instead, prevent users from making this edit.
Test Plan: {F1917640}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11085
Differential Revision: https://secure.phabricator.com/D16846
Summary:
Ref T11853. My CSS change for the more enormous policy dialog was a little too broad, and affected the "You shall not pass!" dialog too.
Narrow the scope of the CSS rules.
Also add a missing "." that I caught.
Test Plan:
- Looked at policy exception dialogs.
- Looked at policy explanation dialogs.
- Looked at the end of that sentence.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11853
Differential Revision: https://secure.phabricator.com/D16841
Summary:
Fixes T11853. To set this up:
- Create "Project A".
- Join "Project A".
- Create a subproject, "Project A Subproject 1".
- This causes Project A to become a parent project.
- This moves you to be a member of "Project A Subproject 1" instead of "Project A" directly.
- Create another subproject, "Project A Subproject 2".
- Do not join this subproject.
- Set the second subproject's policy to "Visible To: Members of Project A".
- Try to edit the second subproject.
Before this change, this fails:
- When querying projects, we sometime try to skip loading the viewer's membership in ancestor projects as a small optimization.
- Via `PhabricatorExtendedPolicyInterface`, we may then return the parent project to the policy filter for extended checks.
- The PolicyFilter has an optimization: if we're checking an object, and we already have that object, we can just use the object we already have. This is common and useful.
- However, in this case it causes us to reuse an incomplete object (an object without proper membership information). We fail a policy check which we should pass.
Instead, don't skip loading the viewer's membership in ancestor projects.
Test Plan:
- Did all that stuff above.
- Could edit the subproject.
- Ran `arc unit --everything`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11853
Differential Revision: https://secure.phabricator.com/D16840
Summary: Fixes T11839. Both are missing a parameter and one is a copy/paste slop.
Test Plan:
{F1913812}
{F1913813}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11839
Differential Revision: https://secure.phabricator.com/D16837
Summary:
Ref T8510. When users type "platypus" into a typeahead, they want "Platypus Playground" to be a higher-ranked match than "AAA Platypus", even though the latter is alphabetically first.
Specifically, the rule is: results which match the query as a prefix of the result text should rank above results which do not.
I believe we now always get this right on the client side. However, WMF has at least one case (described in T8510) where we do not get it right on the server side, and thus the user sees the wrong result.
The remaining issue is that if "platypus" matches more than 100 results, the result "Platypus Playground" may not appear in the result set at all, beacuse there are 100 copies of "AAA Platypus 1", "AAA Platypus 2", etc., first. So even though the client will apply the correct sort, it doesn't have the result the user wants and can't show it to them.
To fix this, split the server-side query into two phases:
- In the first phase, the "prefix" phase, we find results that **start with** "platypus".
- In the second phase, the "content" phase, we find results that contain "platypus" anywhere.
We skip the "prefix" phase if the user has not typed a query (for example, in the browse view).
Test Plan:
This is a lot of stuff, but the new ranking here puts projects which start with "w" at the top of the list. Lower down the list, you can see some projects which contain "w" but do not appear at the top (like "Serious Work").
{F1913931}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8510
Differential Revision: https://secure.phabricator.com/D16838
Summary:
fixes T11792.
There's no good reason any more to have this option, so just drop it.
Test Plan: Load a file, toggle remaining "blame" button. Load search results page and an image too, which are serviced by the same controller.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T11792
Differential Revision: https://secure.phabricator.com/D16833
Summary:
This has been replaced by `PolicyCodex` after D16830. Also:
- Rebuild Celerity map to fix grumpy unit test.
- Fix one issue on the policy exception workflow to accommodate the new code.
Test Plan:
- `arc unit --everything`
- Viewed policy explanations.
- Viewed policy errors.
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D16831
Summary:
Fixes T11836. See some prior discussion in T8376#120613.
The policy hint in headers in the UI is not exhaustive, and can not reasonably be exhaustive. For example, on a revision, it may say "All Users", but really mean "All users who can see the space this object is in and the repository it belongs to, plus the revision author and reviewers".
These rules are explained if you click (and, often, in the documentation), but "All Users" is still at least somewhat misleading.
I don't think there's any perfect solution here that balances the needs of both new and experienced users perfectly, but this change tries to do a bit better about avoiding cases where we say something very open (like "All Users") when the real policy is not very open.
Specifically, I've made these changes to the header:
- Spaces are now listed in the tag, so it will say `(S3 > All Users)` instead of `(All Users)`. They're already listed in the header, this just makes it more explicit that Spaces are a policy container and part of the view policy.
- Extended policy objects are now listed in the tag, so it will say `(S3 > rARC > All Users)` for a revision in the Arcanist repository which is also in Space 3.
- Objects can now provide a "Policy Codex", which is an object that represents a rulebook of more sophisticated policy descriptions. This codex can replace the tag with something else.
- Imported calendar events now say "Uses Import Policy" instead of, e.g., "All Users".
I've made these changes to the policy dialog:
- Split it into more visually separate sections.
- Added an explicit section for extended policies ("You must also have access to these other objects: ...").
- Broken the object policy rules into a "Special Rules" section (for rules like "you can only see a revision if you can see the repository it is part of") and an "Object Policy" section (for the actual object policy).
- Tried to make it a little more readable?
- The new policy dialogs are great to curl up with in front of a fire with a nice cup of cocoa.
I've made these changes to infrastructure:
- Implementing `PhabricatorPolicyInterface` no longer requires you to implement `describeAutomaticCapability()`.
- Instead, implement `PhabricatorPolicyCodexInterface` and return a `PhabricatorPolicyCodex` object.
- This "codex" is a policy rulebook which can set all the policy icons, labels, colors, rules, etc., to properly explain complex policies.
- Broadly, the old method was usually either not useful (most objects have no special rules) or not powerful enough (objects with special rules often need to do more in order to explain them).
Test Plan:
{F1912860}
{F1912861}
{F1912862}
{F1912863}
Reviewers: chad
Reviewed By: chad
Subscribers: avivey
Maniphest Tasks: T11836
Differential Revision: https://secure.phabricator.com/D16830
Summary: Redesign the action comment box for better use in two column, mobile, nuance.
Test Plan: Test in mobile / desktop / tablet, adding and removing actions. Actionless comment boxes, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: cspeckmim, Korvin
Differential Revision: https://secure.phabricator.com/D16811
Summary: Fixes T11834. Actually adding the step wasn't in the `if (...)` block. Also, typo fix.
Test Plan: Saw only one "Explore" on `/guides/`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11834
Differential Revision: https://secure.phabricator.com/D16828
Summary: Ref T5267. I missed these in the variable types conversion.
Test Plan: `arc unit --everything`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5267
Differential Revision: https://secure.phabricator.com/D16824
Summary:
Ref T5267. When extrating data from `pht()` calls, also extract the argument types and export them into the map so they can be used by consumers.
We recognize plurals (`phutil_count()`, `new PhutilNumber`) and genders (`phutil_person()`). We'll need to annotate the codebase for those, since they're currently runtime-only.
Test Plan:
Rebuilt extraction maps, got data like this (note "number" type annotation).
```
"Scaling pool \"%s\" up to %s daemon(s).": {
"uses": [
{
"file": "/daemon/PhutilDaemonOverseer.php",
"line": 378
}
],
"types": [
null,
"number"
]
},
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5267
Differential Revision: https://secure.phabricator.com/D16823
Summary:
Ref T7643. When you do something like this:
- Edit a task description.
- Click "Show Details" on the resulting transaction.
- Get a prose diff dialog showing the change.
...now add some "Old" and "New" tabs. These are useful for:
- reverting to the old text by copy/pasting;
- reading just the new/old text if the diff is noisy;
- sometimes just nice to have?
(This looks a little rough but I didn't want to put a negative margin on tab groups inside dialogs? Not sure what the best fix here is.)
Test Plan: {F1909390}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7643
Differential Revision: https://secure.phabricator.com/D16817
Summary:
Ref T11809. I missed this when adding a "Busy" status.
Also the other dot is orange? Just make them all orange for consistency.
Test Plan: Viewed `@username` of busy users (orange), away users (red).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16819
Summary: Ref T7643. When we send mail about a change to a package description, allow it to say "CHANGES TO PACKAGE DESCRIPTION" instead of "EDIT DETAILS". Smooth!
Test Plan: {F1909417}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7643
Differential Revision: https://secure.phabricator.com/D16818
Summary:
Ref T11801. These are pretty fiddly because users expect to see the end time for timed events ("10 AM - 11 AM" is ONE hour long) but not for all-day events ("Nov 2 - Nov 3" is TWO days long!)
We also want to store the thing the user actually entered so we don't lose data if they un-all-day the event later.
This may take a little more fiddling since it feels a little shaky, but I couldn't break this version immediately.
Test Plan: Imported a French holiday, got proper display in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11801
Differential Revision: https://secure.phabricator.com/D16815
Summary:
Ref T11801. This makes testing/debugging a little easier.
Also fix some inconsistencies with `importAuthorPHID` handling -- it should be the import's author PHID in all cases, so we update imported events properly.
Test Plan: Imported a French holiday with `bin/calendar reload ...`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11801
Differential Revision: https://secure.phabricator.com/D16814
Summary:
Ref T5267. Although translations with very few strings are already put into a "Limited Translations" group, this isn't necessarily clear and was empirically confusing to at least one user, who was surprised that selecting "Spanish" had no UI effect.
Instead, hide limited and test translations entirely unless the install is in developer mode.
Test Plan: In a non-developer-mode install, viewed translations menu. No longer saw translations with very few strings.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5267
Differential Revision: https://secure.phabricator.com/D16807
Summary:
Fixes T4788. This change:
- converts the "Task Graph" into a "Related Objects" tabgroup.
- makes "Task Graph" the first tab in the group.
- moves "Mocks" to become a tab.
- adds a new "Mentions" tab, which shows inbound and outbound mentions.
Primary goal of "mocks" is to give us room for a pinboard/thumbnail view after the next Pholio iteration. Might make sense to make it the default tab (if present) at that point, too, since mocks are probably more important than related tasks when they're present.
Primary goal of "mentions" is to provide a bit of general support for various freeform relationships between tasks: if you want to treat tasks as "siblings" or "related" or "following" or whatever, you can at least find them all in one place. I don't plan to formalize any of these weird one-off relationships in the upstream, although it's vaguely possible that some far-future update might just let you define arbitrary custom relationships and then you can do whatever you want.
Test Plan: {F1906974}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16806
Summary: Ref T11801. When a file is larger than 512KB, queue it for background import instead of trying to do it in the foreground, sinc we risk hitting `max_execution_time`.
Test Plan: {F1906943}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11801
Differential Revision: https://secure.phabricator.com/D16805
Summary:
Ref T11801. This issue led to the stack trace in T11801#199042.
It wasn't obvious that this was wrong because the recover-on-duplicate-key code made it work correctly.
Test Plan: Imported an event with external attendees with no warnings in the log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11801
Differential Revision: https://secure.phabricator.com/D16804
Summary: Ref T11816. We're running this code on empty events which haven't been initialized and don't have a source attached -- just use a more explanatory check which doesn't need anything attached.
Test Plan: Edited default Calendar policies.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16803
Summary:
Ref T11816.
- Now that we can do something meaningful with them, bring back the yellow dots for "busy".
- Default to "busy" when attending events (we could make this "busy" for short events and "away" for long events or something).
- Let users pick how to display their attending status on the event page.
- Also show which event the user is attending since I had to mess with the cache code anyway. We can get rid of this again if it doesn't feel good.
Test Plan:
{F1904179}
{F1904180}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16802
Summary: Ref T11816. Depends on D16800. Show warnings generated by ICS import in the UI.
Test Plan: {F1904122}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16801
Summary:
When Phortune merchant accounts are created via mechanisms other than the web UI (for example, by Phacility unit tests) this validation check may fail.
Transactions are validated even if no transactions of the given type are being applied, to allow the editor to raise errors like "Name is required!".
If there's no TYPE_INVOICEEMAIL transaction, we'll get called with empty `$xactions` and fail on `strlen($new_email)` because the variable is never defined.
As a secondary issue, if contactInfo, invoiceEmail or invoiceFooter are not provided the record will fail to insert (none of these are nullable).
Test Plan: Ran Phacility unit tests, got a clean result for new instance creation.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16798
Summary:
Fixes T11812.
- Pull the logic for building the "Create Whatever" dropdown out.
- Use it to generate NUX buttons, too.
- Use the new logic in Paste and Maniphest.
Test Plan:
- Viewed Paste NUX, button worked.
- Viewed Maniphest NUX with multiple create forms, button worked.
Reviewers: chad, avivey
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T11812
Differential Revision: https://secure.phabricator.com/D16797
Summary:
Ref T11809.
- Allow users to remove the "Until" date from recurring events.
- When removing "Until", show a sensible string ("...set this event to repeat forever.")
- When users go through the "Make Recurring" workflow, don't require them to explicitly select "Recurring: Recurring" from the dropdown. This intent is clear from clicking "Make Recurring".
- When editing "All Future Events", don't literally apply date changes to them, since that doesn't make sense. We update the template, then reschedule any events which haven't been edited already. I think this is what users probably mean if they make this edit.
- When creating an event with a non-default icon, don't show "alice changed the icon from Default to Party.".
- Hide the "recurring mode" transaction, which had no string ("alice edited this Event.") and was redundant anyway.
- Also, add a little piece of developer text to make hunting these things down easier.
Test Plan: Edited various events, parents, children, made events recur, set until, unset until, viewed transactions, rescheduled parents, rescheduled children.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16796
Summary:
Ref T11809. Roughly documents most of the tricky/unintuitive stuff.
Also fixes a bug with "Make Recurring" with no "Until" date.
Test Plan: Read document.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16792
Summary:
Ref T11809. Currently, commenting on a recurring event hits the same "one or all?" dialog that other edits do.
For comments and edits submitted via the comment widget, we can safely assume that you mean "just this one", since it doesn't really make sense to try to bulk-edit an event from that UI.
Test Plan: Commented on a recurring event parent and an event in the series.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16795
Summary: Ref T11809. This makes the mail more consistent with Differential and Maniphest, which only include additional details in the first mail in the thread.
Test Plan:
- Created an event with a description.
- First mail included it.
- Followups did not.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16794
Summary:
Ref T11809. We show a red dot next to a username to indicate that the user is away (on vacation, in a meeting, etc).
It's not very obvious what this means unless you know that's what it is: when you click the username or view a hovercard, there's no visual hint about what the red dot means. It does say "Away", but there is a lot of information and it doesn't visually connect the two.
Connect the two visually by putting a red dot next to the "Away" bit, too.
Test Plan:
Here's my version of it, this feels OK to me but could maybe be more designed:
{F1893916}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16791
Summary:
Ref T11809. As we move toward unprototyping, this panel is probably more relevant/dynamic/interesting more often than the badges panel, I think?
Particularly, I want to make the red dots a little easier to understand, and I think putting this above the fold will help aid discovery (red dot -> click -> see red dot -> see "away until ..." -> see calendar -> "oh they're at a meeting"?).
This is entirely a product/subjective thing so I'm fine with not doing it or using a different order.
I think there's maybe even an argument for putting this above "Projects", but "Projects" feels more core to me, at least for now.
Test Plan: Viewed a user profile, saw "Calendar" above "Badges".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16790
Summary: Ref T11808. This variable is wrong, and would sometimes cause events to set themsevles as their own parents. They would then fail to load, and disrupt cursor paging.
Test Plan:
- Reproduced T11808 locally by reloading test data 2+ times, creating events with themselves as their own parents.
- Appplied fix.
- Nuked data, reloaded, no more self-parents.
- Test datafile: {F1894017}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11808
Differential Revision: https://secure.phabricator.com/D16793
