Summary: Ref T13072. Make large Conduit doc pages a bit more navigable. This prepares for updating "harbormaster.sendmessage" to support sending messages to builds.
Test Plan: Viewed various Conduit API documentation pages, clicked links.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21696
Summary: Ref T13072. These don't do anything useful yet, but get the skeletons in.
Test Plan: Loaded documentation pages without fataling.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21695
Summary: Ref T13072. Trivially convert this into a modular transaction type.
Test Plan: Issued commands to a buildable.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21694
Summary: Ref T13072. This transaction type has no writers and is mooted by EditEngine.
Test Plan: Grepped for transaction constant.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21693
Summary: Ref T13072. Update the last few constant references to this class and remove it.
Test Plan: Grepped for "HarbormasterBuildCommand", got no hits.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21692
Summary: Ref T13072. Push nearly all Harbormaster build message logic into the new per-message transaction classes.
Test Plan:
- Issued every message to Buildables.
- Issued every message to Builds.
- Looked at a big pile of error messages, couldn't find any typos.
- Grepped for affected symbols, etc.
- Ran `bin/harbormaster restart ...`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21691
Summary:
Ref T13072. Further modularize build messages by applying each one in a separate transaction type.
This makes it easier to add new types of messages (although I have no particular plans to do this, offhand) and reduces the amount of switch-boilerplate.
This will probably also simplify validating "harbormaster.sendmessage".
Test Plan:
- Applied all commands.
- Ran migration, saw transactions render properly
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21690
Summary: Ref T13072. Update "HarbormasterBuild" to use modern modular transactions.
Test Plan:
- Aborted, restarted, paused, and resumed a build.
- Used `bin/harbormaster restart`.
- Grepped for use of old "::TYPE_COMMAND" constant, didn't find any hits.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21689
Summary: Ref T13072. No callers currently generate these transactions, and they probably never have. Remove them.
Test Plan: Grepped for "HarbormasterBuildTransaction::TYPE_CREATE" and "self::TYPE_CREATE" in the class, found no hits.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21688
Summary:
Ref T13072. Currently, Harbormaster builds react to messages by applying a transaction inline (which can race) that has no real effect.
Later, the BuildEngine picks up the mesasge and applies a real effect, but this isn't transactional.
This is backwards, and makes it more difficult to transition to ModularTransaction and EditEngine. The desired workflow is:
- sending a message //just// writes to the message table (and queues a worker to process the message);
- the BuildEngine processes the message and applies effects in a transactional way.
Force this into at least roughly the right sequence of behaviors. This paves the way for porting to ModularTransaction, which should allow further cleanup.
Test Plan: Paused, resumed, aborted, and restarted a build. Ran BuildWorkers to process the commands, saw builds update appropriately.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21687
Summary:
Ref T13072. Currently, Builds have basic states (like "passed" and "failed") and pending states where a command has been issued but not yet executed (pausing, resuming, restarting, and aborting).
These are handled in a bit of an ad-hoc way, and not everything treats them the same way. In particular, the build page can concurrently report a build as "Aborting" and "Pausing", with different icons and colors.
Make everything use the same logic so that a Build can only be in exactly zero or one pending state, and use the same icons and colors.
Also tighten up which transitions are allowed: for example, it doesn't make sense to pause an aborting build.
The tighter rules don't all produce great UX right now (like "You can't pause this build.", when it would be better as "You can't pause a build which is already aborting." or similar), but just leave that alone for now.
Test Plan: Viewed builds, applied various state changes, ran BuildWorker to effect the state changes, grepped for affected methods, tried to issue various out-of-sequence build commands.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21685
Summary:
Ref T13072. These two similar tables don't make sense to keep separate. Instead, make Build a valid receiver for BuildMessage objects.
These tables are practically the same, so this is straightforward: just copy the rows in and then drop the old table.
(This table was trivial and ephemeral anyway, so I'm not bothering to do the usual "keep it around for a couple years just in case".)
Test Plan:
- Populated BuildCommand table, ran migration, saw Builds end up in the proper transitional state (e.g., pausing, aborting, restarting) with appropriate queued messages.
- Queued new messages by clicking UI buttons.
- Ran BuildWorkers, saw them process messages and mark them as consumed.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21684
Summary:
Ref T13072. Rename various "command" properties to "message" properties, to prepare for merging "HarbormasterCommand" into "HarbormasterMessage".
This change only renames variables and methods and should not affect program behavior.
Test Plan: Grepped for affected symbols, found no unmodified hits.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21683
Summary: Ref T13660. Clean up callsites to "PhutilExecPassthru->execute()" to prepare to deprecate it.
Test Plan:
- Grepped for "PhutilExecPassthru" and looked for callsites.
- Ran `GIT_SSH=.../ssh-connect git ls-remote origin` to execute the "ssh-connect" code.
- The two passthru future methods have no callers and could possibly be removed, but I'm just letting sleeping dogs lie for now.
Reviewers: cspeckmim
Reviewed By: cspeckmim
Maniphest Tasks: T13660
Differential Revision: https://secure.phabricator.com/D21703
Summary: Ref T13588. See D21497. As of PHP 8, the XML entity loader is disabled by default and the `libxml_disable_entity_loader` function is deprecated. Thus suppress the deprecation warning for now; we could skip the function call, but this is safer.
Test Plan:
* Still works with PHP 7.
* No more deprecation message with PHP 8.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T13588
Differential Revision: https://secure.phabricator.com/D21701
Summary: Replaced the old logo with a new png.
Test Plan: I only tested that the new image was the same dimensions, format and filename as the old one.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D21661
Summary:
Refer to discussion on D21677#275541
Refs D21681 (arcanist changes)
Phabricator has several uses of the `--debug` flag being used with Mercurial. Use of this flag causes additional output to be added which Phabricator needs, however the behavior of `--debug` is not guaranteed to be stable, and in newer versions of Mercurial there have been additional output that has caused Phabricator to choke on parsing the output. This change removes several uses of `--debug` in favor of using `--template` with the `hg log` or `hg annotate` commands in combination with the `{p1.node}` or `{p2.node}` template format.
The use of `{p1node}` format in templates was added in [[ https://www.mercurial-scm.org/wiki/WhatsNew/Archive#Mercurial_2.4_.282012-11-01.29 | Mercurial 2.4 (2012) ]]. This format was deprecated in [[ https://www.mercurial-scm.org/wiki/WhatsNew#Mercurial_4.9_.282019-02-01.29 | Mercurial 4.9 (2019) ]] in favor of using `{p1.node}` format which is unclear when this new format was added (presumably earlier than Mercurial 4.9).
The use of `--template` with `hg annotate` is only officially supported in [[ https://www.mercurial-scm.org/wiki/Release4.6 | Mercurial 4.6 (2018) ]], though does appear to work in 4.5 but is not documented.
Since the `{p1node}` format was introduced in 2.4 this bumps the required version of `hg` to 2.4 (from 1.9). Since the `annotate --template` feature wasn't added until 4.6 (which is still fairly recent), the use of it is gated on a capability test, but still preferred for use where possible to avoid extraneous output from `--debug` flag.
Test Plan:
I verified I could do the following in a mercurial repository, while having mercurial 5.8 installed:
1. Navigate and view files in Diffusion under e.g. `/source/test-repo/`.
2. While viewing a file in Diffusion verified that I could view the blame of the file and the history/annotations looked accurate for the files I was browsing.
3. From the blame sidebar, select to view a commit which loaded and displayed changes properly.
4. View the history of the repository under e.g. `/source/test-repo/history/default/`. I verified the history looked correct and the tree-like structure showing relationship of commits also looked accurate.
I setup mercurial to run version 4.4, created a new repository, added some commits, and verified all the above behavior still works properly.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D21679
Summary:
Ref T13658. This just scrubs some of the simple references from the codebase.
Most of what's left is in documentation which won't be relevant for a fork and/or which I need to separately revise (or more-or-less delete) at some point anyway.
I removed the "install RHEL" and "install Ubuntu" scripts outright since I don't have any reasonable way to test them and don't plan to maintain them.
Test Plan: Grepped for "phacility", "epriestley"; ran unit tests.
Reviewers: cspeckmim
Reviewed By: cspeckmim
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13658
Differential Revision: https://secure.phabricator.com/D21678
Summary:
With newer versions of Mercurial come newer debug messages which need filtered out.
1. In the scenario of Phabricator observing a hosted Mercurial repository which exists on a server in a multi-user environment it's possible that a repository computes branch cache at a tip revision which is not present. When this happens Mercurial will include in the debug output this information. This message indicates that the cache is going to be re-computed. See https://www.mercurial-scm.org/pipermail/mercurial/2014-June/047239.html.
2. Likely in some version with added or improved support for `pager` the debug info seems to indicate when a pager is being invoked for a command. This seems to print out regularly despite piping the stdout.
3. If the repository on Phabricator ever had the `largefiles` extension enabled then some additional details about "updated patterns" will print out.
Test Plan:
I verified an observed repository's history could be browsed, specifically the history of files which previously resulted in "Undefined offset: 1".
Added a unit test to check the results of `filterMercurialDebugOutput()`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D21677
Summary: Found a few typos which could be updated.
Test Plan:
I tested the Configuration page change by navigating to `/config` and verifying the page title set in the browser as well as the page title text on the page
|Before|After|
|---|---|
|{F9013208}|{F9013210}|
|{F9013300}|{F9013301}|
I verified the Conduit error message by navigating to `/auth/start/?__conduit__=1`
{F9013289}
The CircleCI error message was not verified due to the involvement of testing with CircleCI however the change is very minor and has very little risk of impacting any functionality.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D21675
Summary: See T13657. An install has "watcher" packages which should not allow owners to "Force Accept" other packages.
Test Plan:
- Created package A, which I own, on "/", with "Weak" authority.
- Created package B, which I do not own, on "/src".
- Created a revision which touches "/src" and added package B as a reviewer.
- Attempted to accept the revision...
- Before patch: permitted to "Force Accept" for package B.
- After patch: not allowed to "Force Accept" for package B.
- Verified that setting package "A" back to "Strong" authority allows a force-accept for package B.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D21674
Summary: Ref PHI2071. This path is incorrect; the correct path is `local.json`.
Test Plan: Looked in my `conf/local/` directory.
Differential Revision: https://secure.phabricator.com/D21663
Summary:
The datepicker could step by the wrong number of months, due to the date rolling over to the next month when the number of days in the month is exceeded. For example, going forward from January 31 would jump to March 3, while going backward from July 31 would only go to July 1.
Push the date back to ensure that the datepicker stays in the correct month when switching.
Test Plan: Changed months starting from an assortment of dates.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: artms, Korvin
Differential Revision: https://secure.phabricator.com/D21673
Summary: Ref T13614. Provide "bin/repository lock" to temporarily lock repositories for manual maintenance.
Test Plan:
- Read instructions.
- Used `bin/repository lock` according to the instructions.
- Saw Storage tab in Diffusion report lock held during maintenance, released after it completes.
- Saw "maintenance" push log generated and repository version bump.
- Tried to lock some invalid repositories.
Maniphest Tasks: T13614
Differential Revision: https://secure.phabricator.com/D21671
Summary:
Ref T13614. When a script holds the write lock but modifies the repository directly (rather than by pushing), the repository version won't change when the script releases the write lock. Thus, the writes may not propagate to other nodes (it depends which node lucks out and accepts the next write).
To guarantee that writes propagate, allow these scripts to pretend they pushed the repository. These are bare-bones valid events flagged as "Maintenance".
Test Plan:
- Wrote a script to hold the write lock, wait (or pretend to do something), then release the write lock.
- Applied patches, modified script to use new APIs ("newMaintenanceEvent()").
- Ran script, saw repository verison bump and relevant push logs:
{F8814923}
Maniphest Tasks: T13614
Differential Revision: https://secure.phabricator.com/D21670
Summary:
Ref T13614. When an omnipotent user calls "synchronizeWorkingCopyBeforeWrite()", we record a WorkingCopyVersion record with a null "userPHID". The UI then renders this as "Unknown Object (????)".
Improve this behavior:
- When no PHID is available, just render nothing in the UI (this doesn't seem meaningfully different from no version existing at all).
- Allow callers to provide an acting user PHID, similar to Editor.
There's currently no way to perform this kind of write legitimately in the upstream, but T13614 is providing one.
Test Plan:
- Wrote a script that calls "synchronizeWorkingCopyBeforeWrite()" as the omnipotent user.
- Ran script, saw "Unknown Object (????)" in the UI.
- Applied UI fix, saw empty UI.
- Applied "acting as" fix, modified script to act as the Diffusion application, ran script, saw "Diffusion" attribution in UI.
{F8814806}
Maniphest Tasks: T13614
Differential Revision: https://secure.phabricator.com/D21669
Summary:
Ref T13650. Currently, viewing the API console help page for this method fatals because it constructs a generic, untyped panel.
As a step toward improving this, generate a concrete panel type instead. This isn't the best possible fix, see T13650 for discussion.
Test Plan: Viewed "dashboard.panel.edit" API page, now saw a usable page.
Maniphest Tasks: T13650
Differential Revision: https://secure.phabricator.com/D21668
Summary:
As backstory: I accidentally added the subscriber `PHID-USER-abcd` to `T1` on this install by calling `maniphest.edit`. I intended to edit `T1` on my local install.
This edit is permitted for messy technical reasons, described in T13429. It's not valid, but it's hard to prevent.
The state we reach is also possible even if the edit is rejected (i.e., someone can go manually update the database).
Regardless of how we get into this state, the state (a non-user subscriber) breaks the UI on the task page when it attempts to test if the subscriber can see the task.
To prevent this, only claim that a Handle can have capabilities if the handle is complete. If the handle is incomplete (an invalid or restricted object), it either can't be meaningfully tested for capabilities or the viewer isn't allowed to know them.
Test Plan:
Viewed `T1` on this install, saw a fatal. Applied the same edit to `T1` locally, got the same fatal. Applied patch, no more fatal. Now saw "Unknown Object (User)" in subscriber curtain.
Specifically, the fatal is:
> Attempting to test capability "view" for handle of type "USER", but this capability has not been attached.
Differential Revision: https://secure.phabricator.com/D21662
Summary: Ref T13559. Substantially correct the client logic for "Save" and "Cancel" actions to handle unusual cases.
Test Plan:
Quoting behavior:
- Quoted a comment.
- Cancelled the quoted comment without modifying anything.
- Reloaded page.
- Before changes: quoted comment still exists.
- After changes: quoted comment is deleted.
- Looked at comment count in header, saw consistent behavior (before: weird behavior).
Empty suggestion behavior:
- Created a new comment on a suggestable file.
- Clicked "Suggest Edit" to enable suggestions.
- Without making any text or suggestion changes, clicked "Save".
- Before changes: comment saves, but is empty.
- After changes: comment deletes itself without undo.
General behavior:
- Created and saved an empty comment (deletes itself).
- Created and saved a nonempty comment (saves as draft).
- Created and saved an empty comment with an edit suggestion (saves).
- Created and saved an empty comment with a suggestion to entirely delete lines -- that is, no suggestion text (saves).
- Edited a comment, saved without changes (save).
- Edited a comment, save deleting all text (saves -- note that this is intentionally without undo, since this is a lot of steps to do by accident).
- Cancel editing an unchanged comment (cancels without undo).
- Cancel editing a changed comment (cancels with undo).
- Undo'd, got text back.
- Cancel new comment with no text (deletes without undo).
- Cancel new comment with text (deletes with undo).
- Undo'd, got text back.
- Saved a quoted comment with no changes (saves -- note that this is intentionally not a "delete", since just quoting someone seems fine if you click "Save" -- maybe you want to come back to it later).
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21654
Summary:
Ref T13559. Various client decisions depend on the "initial" or "committed" states of inline comments. Previously, these were informally constructed from "mostly similar" available values, or glossed over in some cases.
On the server, save the initial state when creating a comment. Save the committed state when applying a "save" operation. Send all three states to the client.
On the client, load and track all three states explicitly.
Test Plan: Created inlines, etc. See followups.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21653
Summary:
Ref T13559. Currently, the default text for inline comment side-loads in a bizarre way. Instead, when a user creates an inline comment, load the inline context and set it as part of the initial content state.
This allows the side channel (and the code that puts the text in place at the last second on the client) to be removed.
Test Plan: Created inlines, clicked "Suggest Edit". See followup changes.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21652
Summary:
Ref T13559. To allow the client to make correct decisions about what buttons mean, track an explicit "Committed" content state.
This is the last version of the comment that has been saved on the server, and does not exist if the comment has never been saved.
Test Plan: Created comments, etc. See followups.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21651
Summary:
Ref T13559. If you create comments A and B, then delete comments A and B, then undo the deletion of A, the UI undoes the deletion of B instead.
This is becasue the undo rows are shipped down with a static scalar metadata reference. When copied multiple times to create multiple undo rows, they reference the same data object.
Preventing this in the general case is a problem with greater scope. For now, just avoid rendering these rows with any metadata so they don't alias a single data object.
Test Plan:
- Created comments A, B.
- Deleted comments A, B.
- Clicked "Undo" on A.
- Before: Deletion of "B" undone.
- After: Deletion of "A" undone.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21650
Summary:
Ref T13559. When the user clicks the "Cancel" button, we sometimes take it to mean "delete" (when the comment is empty).
Both the client and server make a decision about this, and they may not agree, which causes the client to fall out of sync.
Make the client responsible for deciding whether it wants to interpret a click on the "Cancel" button as a "revert" or a "delete".
Test Plan: Cancelled empty and nonempty comments, etc. See followup changes.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21649
Summary:
Ref T13559. When you click "Save" on an inline comment and it's empty, we may actually delete the comment.
Currently, the client and server both make decisions about whether the comment should be deleted. These decisions may not agree, causing the client state to fall out of sync.
Make the client authoritative about whether it wants to handle the user clicking the "Save" button as an intent to save or an intent to delete.
Test Plan: Saved empty and nonempty inlines. See followup changes.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21648
Summary:
Ref T13559. Instead of directly reading form state, make all callers use the "active" state instead. The state reads the form.
No functional changes, just clarifying responsiblites.
Test Plan: Created inlines, etc. See followup changes.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21647
Summary:
Ref T13559. Rather than reading from the document, make client inlines actively track their current "active" state.
The "active" state is what the user currently sees in the client UI.
Test Plan: Created inlines, etc. See followups.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21646
Summary:
Ref T13559. In an effort to ultimately fix the "quote + cancel" bug, begin formalizing content states on the client.
This creates a "ContentState" client object and moves the authoritative storage for the "hasSuggestion" property to it.
Test Plan: Created inlines, etc. See followups.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21645
Summary:
Ref T13559. D21261 added caching here, but the logic in rebuilding inlines wasn't quite correct, and could lead to us double-appending.
Instead, when rebuilding, unconditionally discard the old list.
Test Plan:
- Added inline comments to a file in Differential.
- Marked some done.
- Scrolled so the inline comment header was visible, saw "X / Y Comments" button in header.
- Clicked "Show 20 more lines" on the changeset with inlines (or toggle "View Unified" / "View Side-by-Side", or other interactions likely work too).
- Before: saw "X / Y" change improperly (because inlines in that file were double-counted).
- After: saw stable count.
- Grepped for "differential-inline-comment-refresh", got no hits, concluded this event has no listeners.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21642
Summary:
Ref T13647. The ref discovery process prunes commits that no longer exist in the repository before executing "git log <new heads> --not <old heads>" to identify newly published commits.
If we don't do this, the "git log" command will fail if any old head has been pruned from the repository.
Currently, this test for missing commits starts with a call to "git for-each-ref" to attempt to resolve symbols as tag or branch names, but:
- this is painfully slow in repositories with many refs; and
- this is incorrect (not consistent with "git" behavior) for 40-character hex strings, which Git will never resolve as symbolic names.
Instead, when a symbol is a 40-character hex string, skip "git for-each-ref" and jump directly to "git cat-file --batch-check".
Test Plan:
- Ran `bin/repository update` in a repository with 65K refs and extra debugging info.
- Before: took ~30s, three calls to `git for-each-ref`.
- After: took ~20s, two calls to `git for-each-ref`. Same resolution result on queries.
Maniphest Tasks: T13647
Differential Revision: https://secure.phabricator.com/D21658
Summary: Ref T13641. These conditions are swapped, and "activeBindings" loads more data than necessary while "bindings" doesn't load enough.
Test Plan: Called method with each attachment, got good results instead of an exception.
Maniphest Tasks: T13641
Differential Revision: https://secure.phabricator.com/D21657
Summary:
Ref T13644. Ref T13638.
- Double-encode the symbol that is used as a path component, similar to Diffusion.
- Fix an outdated reference to ".path", which provided context for symbol lookup.
- Prevent command-clicking headers from looking up the path as a symbol.
Test Plan:
- Command-clicked headers, no longer got a symbol.
- Command-clicked stuff with "/", saw it double-encoded and decoded properly.
- Command-clicked normal symbols, saw "path" populate correctly.
Maniphest Tasks: T13644, T13638
Differential Revision: https://secure.phabricator.com/D21641
Summary:
Ref T9764. These stars are inconsistent, not accessible, and generally weird. They predate icons.
Update them to use icons instead.
Test Plan:
{F8545721}
{F8545722}
{F8545723}
Maniphest Tasks: T9764
Differential Revision: https://secure.phabricator.com/D21640
Summary:
Ref T9764. These "star" icons are unclear, inconsistent, and not friendly to colorblind users.
They date from a time long ago when the product didn't have icons.
Modernize them and make them more consistent with the similar statuses in Harbormaster.
Test Plan:
{F8545690}
{F8545691}
{F8545692}
Maniphest Tasks: T9764
Differential Revision: https://secure.phabricator.com/D21639
Summary: Ref T9499. When using the manual "Update Diff" workflow on the web, the "Repository" field isn't pre-filled properly. This can lead to revisions losing their repository after a manual update.
Test Plan: Did a manual update of a revision with a repository, saw it stick.
Maniphest Tasks: T9499
Differential Revision: https://secure.phabricator.com/D21638
Summary:
See PHI2032. The Conduit UI shows some "Example Custom Constraints" that are intended to be generic, but use of "statuses" is misleading since many objects have a status and most of them don't support these specific values.
Make it more clear that these are generic values.
Test Plan: Read new text.
Differential Revision: https://secure.phabricator.com/D21637
Summary: Ref T13641. Now that we can provide an "Active Devices" query, provide it and make it the default.
Test Plan: Viewed Almanac devices, got a list of active devices. Clicked "All Devices" to get all devices.
Maniphest Tasks: T13641
Differential Revision: https://secure.phabricator.com/D21636
