Summary:
Add variable names (`$varname` in `@param type $varname explanation`) to PHPDoc method headers, for fun and profit.
Closes T15923
Test Plan:
* Read the method signatures and their corresponding PHPDoc headers at your fireplace
* Still run `./bin/diviner generate` without explosions (though it is very lenient anyway?)
Reviewers: O1 Blessed Committers, valerio.bozzolan
Reviewed By: O1 Blessed Committers, valerio.bozzolan
Subscribers: tobiaswiese, valerio.bozzolan, Matthew, Cigaryno
Maniphest Tasks: T15923
Differential Revision: https://we.phorge.it/D25794
Summary:
Ref T13493. Google returns a lower-quality account identifier ("email") and a higher-quality account identifier ("id"). We currently read only "email".
Change the logic to read both "email" and "id", so that if Google ever moves away from "email" the transition will be a bit easier.
Test Plan: Linked/unlinked a Google account, looked at the external account identifier table.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21028
Summary: Depends on D21019. Ref T13493. There are no more barriers to removing readers and writers of "accountID"; the new "ExternalAccountIdentity" table can replace it completely.
Test Plan: Linked and unlinked OAuth accounts, logged in with OAuth accounts, tried to double-link OAuth accounts, grepped for affected symbols.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21022
Summary:
Depends on D21018. Ref T13493. Ref T6703. The "ExternalAccount" table has a unique key on `<accountType, accountDomain, accountID>` but this no longer matches our model of reality and changes in this sequence end writes to `accountID`.
Remove this key.
Then, remove all readers of `accountType` and `accountDomain` (and all nontrivial writers) because none of these callsites are well-aligned with plans in T6703.
This change has no user-facing impact today: all the rules about linking/unlinking/etc remain unchanged, because other rules currently prevent creation of more than one provider with a given "accountType".
Test Plan:
- Linked an OAuth1 account (JIRA).
- Linked an OAuth2 account (Asana).
- Used `bin/auth refresh` to cycle OAuth tokens.
- Grepped for affected symbols.
- Published an Asana update.
- Published a JIRA link.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13493, T6703
Differential Revision: https://secure.phabricator.com/D21019
Summary:
Depends on D21015. When we sync an external account and get a list of account identifiers, write them to the database.
Nothing reads them yet and we still write "accountId", this just prepares us for reads.
Test Plan: Linked, refreshed, unlinked, and re-linked an external account. Peeked at the database and saw a sensible-looking row.
Differential Revision: https://secure.phabricator.com/D21016
Summary:
Depends on D21013. Ref T13493. When users log in with most providers, the provider returns an "ExternalAccount" identifier (like an Asana account GUID) and the workflow figures out where to go from there, usually a decision to try to send the user to registration (if the external account isn't linked to anything yet) or login (if it is).
In the case of password providers, the password is really a property of an existing account, so sending the user to registration never makes sense. We can bypass the "external identifier" indirection layer and just say "username -> internal account" instead of "external GUID -> internal mapping -> internal account".
Formalize this so that "AuthProvider" can generate either a "map this external account" value or a "use this internal account" value.
This stops populating "accountID" on "password" "ExternalAccount" objects, but this was only an artifact of convenience. (These records don't really need to exist at all, but there's little harm in going down the same workflow as everything else for consistency.)
Test Plan: Logged in with a username/password. Wiped the external account table and repeated the process.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21014
Summary:
Depends on D21012. Ref T13493. Currently, auth adapters return a single identifier for each external account.
Allow them to return more than one identifier, to better handle cases where an API changes from providing a lower-quality identifier to a higher-quality identifier.
On its own, this change doesn't change any user-facing behavior.
Test Plan: Linked and unlinked external accounts.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21013
Summary:
Ref T13249. See PHI774. When users follow an email login link ("Forgot password?", "Send Welcome Email", "Send a login link to your email address.", `bin/auth recover`), we send them to a password reset flow if an install uses passwords.
If an install does not use passwords, we previously dumped them unceremoniously into the {nav Settings > External Accounts} UI with no real guidance about what they were supposed to do. Since D20094 we do a slightly better job here in some cases. Continue improving this workflow.
This adds a page like "Reset Password" for "Hey, You Should Probably Link An Account, Here's Some Options".
Overall, this stuff is still pretty rough in a couple of areas that I imagine addressing in the future:
- When you finish linking, we still dump you back in Settings. At least we got you to link things. But better would be to return you here and say "great job, you're a pro".
- This UI can become a weird pile of buttons in certain configs and generally looks a little unintentional. This problem is shared among all the "linkable" providers, and the non-login link flow is also weird.
So: step forward, but more work to be done.
Test Plan: {F6211115}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20170
Summary:
Depends on D20111. Ref T6703. Currently, each ExternalAccount row is tied to a provider by `providerType` + `providerDomain`. This effectively prevents multiple providers of the same type, since, e.g., two LDAP providers may be on different ports on the same domain. The `domain` also isn't really a useful idea anyway because you can move which hostname an LDAP server is on, and LDAP actually uses the value `self` in all cases. Yeah, yikes.
Instead, just bind each account to a particular provider. Then we can have an LDAP "alice" on seven different servers on different ports on the same machine and they can all move around and we'll still have a consistent, cohesive view of the world.
(On its own, this creates some issues with the link/unlink/refresh flows. Those will be updated in followups, and doing this change in a way with no intermediate breaks would require fixing them to use IDs to reference providerType/providerDomain, then fixing this, then undoing the first fix most of the way.)
Test Plan: Ran migrations, sanity-checked database. See followup changes for more comprehensive testing.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20112
Summary: See D20136. This method is sort of inherently bad because it is destructive for some inputs (`x=1&x=2`) and had "PHP-flavored" behavior for other inputs (`x[]=1&x[]=2`). Move to explicit `...AsMap` and `...AsPairList` methods.
Test Plan: Bit of an adventure, see inlines in a minute.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20141
Summary:
Depends on D20094. Ref T13244. Ref T6703. See PHI774. Currently, we use an older-style radio-button UI to choose an auth provider type (Google, Password, LDAP, etc).
Instead, use a more modern click-to-select UI.
Test Plan: {F6184343}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13244, T6703
Differential Revision: https://secure.phabricator.com/D20095
Summary:
Ref T4340. Some "Register/Login" and "Link External Account" buttons are forms which submit to third-party sites. Whitelist these targets when pages render an OAuth form.
Safari, at least, also prevents a redirect to a third-party domain after a form submission to the local domain, so when we first redirect locally (as with Twitter and other OAuth1 providers) we need to authorize an additional URI.
Test Plan: Clicked all my registration buttons locally without hitting CSP issues.
Maniphest Tasks: T4340
Differential Revision: https://secure.phabricator.com/D19159
Summary: Cursory research indicates that "login" is a noun, referring to a form, and "log in" is a verb, referring to the action of logging in. I went though every instances of 'login' I could find and tried to clarify all this language. Also, we have "Phabricator" on the registration for like 4-5 times, which is a bit verbose, so I tried to simplify that language as well.
Test Plan: Tested logging in and logging out. Pages feel simpler.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18322
Summary: Ref T12509. This encourages code to move away from HMAC+SHA1 by making the method name more obviously undesirable.
Test Plan: `grep`, browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12509
Differential Revision: https://secure.phabricator.com/D17632
Summary:
Fixes T11480. This cleans up the error logs a little by quieting three common errors which are really malformed requests:
- The CSRF error happens when bots hit anything which does write checks.
- The "wrong cookie domain" errors happen when bots try to use the `security.alternate-file-domain` to browse stuff like `/auth/start/`.
- The "no phcid" errors happen when bots try to go through the login flow.
All of these are clearly communicated to human users, commonly encountered by bots, and not useful to log.
I collapsed the `CSRFException` type into a standard malformed request exception, since nothing catches it and I can't really come up with a reason why anything would ever care.
Test Plan:
Hit each error through some level of `curl -H ...` and/or fakery. Verified that they showed to users before/after, but no longer log.
Hit some other real errors, verified that they log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11480
Differential Revision: https://secure.phabricator.com/D16402
Summary:
Ref T10785. Around the time we launched Phacility SAAS we implemented this weird autologin hack. It works fine, so clean it up, get rid of the `instanceof` stuff, and support it for any OAuth2 provider.
(We could conceivably support OAuth1 as well, but no one has expressed an interest in it and I don't think I have any OAuth1 providers configured correctly locally so it would take a little bit to set up and test.)
Test Plan:
- Configured OAuth2 adapters (Facebook) for auto-login.
- Saw no config option on other adapters (LDAP).
- Nuked all options but one, did autologin with Facebook and Phabricator.
- Logged out, got logout screen.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10785
Differential Revision: https://secure.phabricator.com/D16060
Summary:
Fixes T9997. This was in the database since v0, I just never hooked up the UI since it wasn't previously meaningful.
However, it now makes sense to have a provider like Asana with login disabled and use it only for integrations.
Test Plan: Disabled login on a provider, verified it was no longer available for login/registration but still linkable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9997
Differential Revision: https://secure.phabricator.com/D14794
Summary: See D14025. In all cases where we compare hashes, use strict, constant-time comparisons.
Test Plan: Logged in, logged out, added TOTP, ran Conduit, terminated sessions, submitted forms, changed password. Tweaked CSRF token, got rejected.
Reviewers: chad
Reviewed By: chad
Subscribers: chenxiruanhai
Differential Revision: https://secure.phabricator.com/D14026
Summary: Use `PhutilClassMapQuery` where appropriate.
Test Plan: Browsed around the UI to verify things seemed somewhat working.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13429
Summary: All classes should extend from some other class. See D13275 for some explanation.
Test Plan: `arc unit`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13283
Summary:
Ref T6755. This improves our resistance to SSRF attacks:
- Follow redirects manually and verify each component of the redirect chain.
- Handle authentication provider profile picture fetches more strictly.
Test Plan:
- Tried to download macros from various URIs which issued redirects, etc.
- Downloaded an actual macro.
- Went through external account workflow.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12151
Summary:
Ref T7152. This substantially completes the upstream login flow. Basically, we just cookie you and push you through normal registration, with slight changes:
- All providers allow registration if you have an invite.
- Most providers get minor text changes to say "Register" instead of "Login" or "Login or Register".
- The Username/Password provider changes to just a "choose a username" form.
- We show the user that they're accepting an invite, and who invited them.
Then on actual registration:
- Accepting an invite auto-verifies the address.
- Accepting an invite auto-approves the account.
- Your email is set to the invite email and locked.
- Invites get to reassign nonprimary, unverified addresses from other accounts.
But 98% of the code is the same.
Test Plan:
- Accepted an invite.
- Verified a new address on an existing account via invite.
- Followed a bad invite link.
- Tried to accept a verified invite.
- Reassigned an email by accepting an unverified, nonprimary invite on a new account.
- Verified that reassigns appear in the activity log.
{F291493}
{F291494}
{F291495}
{F291496}
{F291497}
{F291498}
{F291499}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152
Differential Revision: https://secure.phabricator.com/D11737
Summary: Ref T7153. I am not sure if this is 100% correct because sometimes you have to POST vs GET and I don't know if the redirect response will / can do the right thing? I think options to fix this would be to 1) restrict this functionality to JUST the Phabricator OAuth provider type or 2) something really fancy with an HTTP(S) future. The other rub right now is when you logout you get half auto-logged in again... Thoughts on that?
Test Plan: setup my local instance to JUST have phabricator oauth available to login. was presented with the dialog automagically...!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7153
Differential Revision: https://secure.phabricator.com/D11701
Summary:
CanCDN flag indicates that a file can be served + cached
via anonymous content distribution networks.
Once D10054 lands, any files that lack the CanCDN flag
will require a one-time-use token and headers will
prohibit cache to protect sensitive files from
unauthorized access.
This diff separates the CanCDN changes from the code that
enforces these restrictions in D10054 so that the changes
can be tested and refined independently.
Test Plan: Work in progress
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: rush898, qgil, epriestley, aklapper, Korvin
Maniphest Tasks: T5685
Differential Revision: https://secure.phabricator.com/D10166
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: This is useful when you're trying to onboard an entire office and you end up using the Google OAuth anyway.
Test Plan: tested locally. Maybe I should write some tests?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9150
Summary:
OAuth1 doesn't have anything like the `state` parameter, and I overlooked that we need to shove one in there somewhere. Append it to the callback URI. This functions like `state` in OAuth2.
Without this, an attacker can trick a user into logging into Phabricator with an account the attacker controls.
Test Plan:
- Logged in with JIRA.
- Logged in with Twitter.
- Logged in with Facebook (an OAuth2 provider).
- Linked a Twitter account.
- Linked a Facebook account.
- Jiggered codes in URIs and verified that I got the exceptions I expected.
Reviewers: btrahan, arice
Reviewed By: arice
CC: arice, chad, aran
Differential Revision: https://secure.phabricator.com/D8318
Summary:
Ref T4443. Make hashing algorithms pluggable and extensible so we can deal with the attendant complexities more easily.
This moves "Iterated MD5" to a modular implementation, and adds a tiny bit of hack-glue so we don't need to migrate the DB in this patch. I'll migrate in the next patch, then add bcrypt.
Test Plan:
- Verified that the same stuff gets stored in the DB (i.e., no functional changes):
- Logged into an old password account.
- Changed password.
- Registered a new account.
- Changed password.
- Switched back to master.
- Logged in / out, changed password.
- Switched back, logged in.
- Ran unit tests (they aren't super extensive, but cover some of the basics).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, kofalt
Maniphest Tasks: T4443
Differential Revision: https://secure.phabricator.com/D8268
Summary:
Ref T4339. Login providers use absolute URIs, but the ones that rely on local form submits should not, because we want to include CSRF tokens where applicable.
Instead, make the default be relative URIs and turn them into absolute ones for the callback proivders.
Test Plan: Clicked, like, every login button.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8045
Summary: Ref T3958. Adds a provider for Mozilla's Persona auth.
Test Plan:
- Created a Persona provider.
- Registered a new account with Persona.
- Logged in with Persona.
- Linked an account with Persona.
- Dissolved an account link with Persona.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3958
Differential Revision: https://secure.phabricator.com/D7313
Summary: Adds plain support for object lists that just look like lists
Test Plan: review UIexamples and a number of other applications
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6922
Summary: Ref T3687. These buttons don't work quite the same way, but are similar enough that the code seems worth consolidating.
Test Plan: Viewed and clicked both OAuth1 (Twitter, JIRA) and OAuth2 (Facebook) login buttons. Got logins.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D6874
Summary:
Ref T3687. Depends on D6867. This allows login/registration through JIRA.
The notable difference between this and other providers is that we need to do configuration in two stages, since we need to generate and save a public/private keypair before we can give the user configuration instructions, which takes several seconds and can't change once we've told them to do it.
To this effect, the edit form renders two separate stages, a "setup" stage and a "configure" stage. In the setup stage the user identifies the install and provides the URL. They hit save, we generate a keypair, and take them to the configure stage. In the configure stage, they're walked through setting up all the keys. This ends up feeling a touch rough, but overall pretty reasonable, and we haven't lost much generality.
Test Plan: {F57059}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D6868
Summary:
Ref T1536. This is equivalent to logging out and logging back in again, but a bit less disruptive for users. For some providers (like Google), this may eventually do something different (Google has a "force" parameter which forces re-auth and is ostensibly required to refresh long-lived tokens).
Broadly, this process fixes OAuth accounts with busted access tokens so we can do API stuff. For other accounts, it mostly just syncs profile pictures.
Test Plan:
Refreshed LDAP and Oauth accounts, linked OAuth accounts, hit error conditions.
{F47390}
{F47391}
{F47392}
{F47393}
{F47394}
{F47395}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6290
Summary:
Ref T1536.
- Allow providers to customize the look of external accounts.
- For username/password auth, don't show the account view (it's confusing and not useful).
- For OAuth accounts, show token status.
Test Plan:
{F47374}
{F47375}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6289
Summary:
Ref T1536.
- Move all the provider-specific help into contextual help in Auth.
- This provides help much more contextually, and we can just tell the user the right values to use to configure things.
- Rewrite account/registration help to reflect the newer state of the word.
- Also clean up a few other loose ends.
Test Plan: {F46937}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6247
Summary: Ref T1536. This is the last major migration. Moves us over to the DB and drops all the config stuff.
Test Plan:
- Ran the migration.
- Saw all my old config brought forward and respected, with accurate settings.
- Ran LDAP import.
- Grepped for all removed config options.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, wez
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6243
Summary:
Ref T1536. This sets us for the "Config -> Database" migration. Basically:
- If stuff is defined in the database, respect the database stuff (no installs have anything defined yet since they can't reach the interfaces/code).
- Otherwise, respect the config stuff (all installs currently do this).
Test Plan: Saw database stuff respected when database stuff was defined; saw config stuff respected otherwise.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6240
Summary:
Ref T1536. None of this code is reachable.
For the new web UI for auth edits, give providers more and better customization options for handling the form. Allow them to format transactions.
Also fix the "Auth" application icon.
Test Plan: {F46718}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6221
Summary:
Ref T1536.
- When linking accounts after initially failing, make the crumb say "Link Account" instead of "Login".
- When on the LDAP failure form, show a "Cancel" button returning to start (if logging in) or settings (if linking accounts).
- Allow providers to distinguish between "start", "login" and "link" rendering.
Test Plan: Linked and logged in with LDAP and other registration mechainsms.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6214
Summary: Ref T1536. When auth providers are edited, show the edit history.
Test Plan: {F46400}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6203
Summary: Ref T1536. Many rough / broken edges, but adds the rough skeleton of the provider edit workflow.
Test Plan: {F46333}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6200
