Summary: Fixes T9871. Ref T10004. These won't win any awards but it fixes them being incredibly weird and confusing.
Test Plan:
{F1029090}
- Tried to use controls, got reasonable behavior.
- Used normal controls to make sure I didn't break anything.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9871, T10004
Differential Revision: https://secure.phabricator.com/D14814
Summary:
Fixes T9984. When a tokenizer only allows one selection (like "Task Owner:" or "Land Onto Branch:"), keep the browse button active but have it //replace// values.
Also, have "Create Subtask" default to the system default status, so subtasks of closed tasks are not also closed.
Test Plan:
- Browsed an empty limit=1 tokenizer.
- Replaced a full limit=1 tokenizer.
- Browsed an empty no-limit tokenizer.
- Browsed more tokens into the no-limit tokenizer.
- Typed some tokens normally.
- Created a subtask of a closed task.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9984
Differential Revision: https://secure.phabricator.com/D14785
Summary: Ref T7858. Don't let users add multiple values to single-value tokenizers by using the "Browse" button.
Test Plan:
- Added a token, browse button was disabled.
- Removed the token, browse button was enabled again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7858
Differential Revision: https://secure.phabricator.com/D14738
Summary:
Ref T4100. In Herald, using the browse dialog to select a result didn't work because we'd add the token with no name value. Other things would render it elsewhere, but it would eventaully be discarded.
Instead, add it with a name value.
Test Plan: Edited a Herald rule and used Browse > Select to add a token. Saved rule. Saw token persist.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4100
Differential Revision: https://secure.phabricator.com/D12529
Summary: Moves the Browse... button into a Search Icon on the actual tokenizer. I played with a number of icon treatments, and Search seems to convey the right attribute, other things like lists and menus didn't quite feel right to me, but feel free to push back if you hate search.
Test Plan:
Tested lots of tokens, little tokens, small screens, etc.
{F375467}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12452
Summary:
Ref T4100. Overall:
- Use token background color to communicate token type (blue = object, yellow = function, grey = disabled/closed, red = invalid).
- Use token icon color to make color choices consistent (specifically, use project icon colors in project tokens).
- For functions, use token icon to communicate function result type (e.g., viewer() has a user icon; members(...) has a group icon), since we don't need the icon to indicate "this is a function" anymore.
Test Plan:
{F374615}
{F374616}
{F374617}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4100
Differential Revision: https://secure.phabricator.com/D12446
Summary:
Ref T4100. This is still a bit rough around the edges, but mostly does what we're after.
- Implements viewer() and members(...) functions.
- The new browse workflow makes these discoverable.
Test Plan: {F374201}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T4100
Differential Revision: https://secure.phabricator.com/D12444
Summary: Ref T5750. This makes browse work for all of the dynamic tokenizers in Herald, Policies, batch editor, etc.
Test Plan: Used tokenizers in Herald, Policies, Batch editor.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5750
Differential Revision: https://secure.phabricator.com/D12442
Summary: Ref T5750. This adds a basic browse view. Design is a bit rough, see T7841 for some screenshots.
Test Plan: Used browse view to add tokens to tokenizers.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5750
Differential Revision: https://secure.phabricator.com/D12441
Summary:
Fixes T4656. Helps users with this naming convention, which is probably not super duper rare.
Users will need to make an edit to a project -or- run bin/search index "#project-tag" to make this actually work.
Test Plan: made a project "[T4656test]". Typed "t4" and project showed up!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4656
Differential Revision: https://secure.phabricator.com/D11302
Summary:
Fixes T5251. We don't recompute tokenizer metrics accurately after a paste event.
Listen for paste events and redraw the input.
Test Plan: Pasted long text into a tokenizer in Safari, Firefox and Chrome.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5251
Differential Revision: https://secure.phabricator.com/D10442
Summary:
Fixes T5727. Updates the regexes to split on '-'. Also changes the editor such that tokens are updated by the larger search process. (Note this means we update this data more often then we need to - for every project transaction.)
Users will need to make an edit to a project -or- run `bin/search index "#project-tag"` to make this actually work.
Test Plan: Made "Frontend-Engineering", "Engineering", and "Backend-Enginering". They all showed up in the typeahead!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5727
Differential Revision: https://secure.phabricator.com/D10247
Summary:
Ref T4420. Fixes T5473. Currently, when typeahead results get redrawn, you can lose your cursor position. A simple way to reproduce this is type "dif", select "Differential" using the arrow keys, then type "f". The selection will be lost.
Instead: store the old selection, then look for an item with the same name in the new set and select it. In effect, this preserves any focus selection.
Test Plan:
- Typed "dif".
- Typed "down arrow key" to select "Differential".
- Typed "f".
- "Differential" remained selected.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5473, T4420
Differential Revision: https://secure.phabricator.com/D9900
Summary: I'm pretty sure that `@group` annotations are useless now... see D9855. Also fixed various other minor issues.
Test Plan: Eye-ball it.
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9859
Summary:
Allows you to quickly search for files within a repository. Roughly:
- We build a big tree of everything and ship it to the client.
- The client implements a bunch of Sublime-ish magic to find paths.
Test Plan: {F154007}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, zeeg
Differential Revision: https://secure.phabricator.com/D9087
Summary: Ref T4441. In D8250 I added code to drop results if they don't match
the current typeahead state, but with the OnDemand source we were incorrectly
comparing normalized values to denormalized values. Instead, pass and compare
raw values.
Auditors: btrahan, chad
Summary: Ref T4420. I think the border is good enough without this spinny thing, and it needs a lot of code.
Test Plan: Used typeahead.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8249
Summary:
Ref T4420. After the changes to the tokenizer, I sometimes do this:
- Type something like "diff" into a project typeahead.
- Select "differential".
- A fraction of a second later, the typeahead pops back open.
This is because I selected the result from a partial query (like "diff" running against the "di" results) and then the full results of the "diff" query came back to the browser.
Instead, when showing results, require that the current state match the state that the results are for: don't show "dog" results if the tokenizer now reads "cat", for whatever reason.
Test Plan: Added a 1s delay to results, typed "a", then typed "m" and selected a result in less than a second. Prior to the patch, the tokenizer would pop back open with "am" results afterward. Now, it doesn't.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8250
Summary:
Ref T4420. When a result list contains both open and closed results, hide the closed results. I think this has a good chance of almost always working, and feeling very intuitive. It has a small chance of being a weird mess. It feels reasonable to me so far
The one bad case I can come up with here is that if you have results which shadow each other, like "Apples" (a closed project) and "Apples and Bananas" (an open project), it is impossible to get "Apples" in the result list, because "Apples and Bananas" will always shadow it. Let's wait for someone to hit this before we figure out how to deal with it.
Test Plan: Typed through open stuff to hit closed stuff.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8238
Summary:
Ref T4420. Fixes T3309. Two major UX issues here:
- When the user extends a query ("alin" -> "alinc"), we currently hide all the results, then show them again when the new results arrive. This makes the typeahead feel a bit flickery. Instead, show matching results, then add more results when everything arrives.
- When loading more results from ondemand sources, we currently do not give you any indication that things are loading. Instead:
- Show a loading GIF (this might need #design help, @chad).
- Slightly lighten the control border.
- I didn't want to do anything like actually add "loading" text because it would cause UI flicker in the 'extend a query' case and some other cases, but otherwise this design is totally made up.
Test Plan: Typed into tokenizers and extended queries, got a better-feeling UI.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T3309, T4420
Differential Revision: https://secure.phabricator.com/D8233
Summary:
Ref T1279. The new dual-mode user/project tokenizers are a bit disorienting. Provide content type hints.
Very open to any suggestions here, most of this patch is just getting the right data in the right places. We can change things up pretty easily.
- I like the little icons in the tokens themselves, I think they look good and are useful.
- I'm less sold on the '(Project)' thing I did in the dropdown. We can easily make this richer if you have thoughts on it -- we could put icons in the left column maybe? Or right-justify the types?
- I made it always sort users above projects.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran, carl
Maniphest Tasks: T4420, T1279
Differential Revision: https://secure.phabricator.com/D7250
Summary:
The issue was noticed in Firefox when user with login "watch"
was registered in the database. And it was caused by Object
in Firefox having "watch" method.
Solved by checking for whether lookup object does have own
property before using it as a map key.
Test Plan:
To test the issue simply create a user with login "watch",
open the phabricator site in Firefox and try to assign any
maniphest task to this user. You'll see exception being
printed to the javascript console (in my case it's printed
to firebug console).
Reviewers: #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: epriestley, aran
Differential Revision: https://secure.phabricator.com/D8037
Summary: Fixes T3853. See inline comments for details.
Test Plan: Using iOS simulator, mashed the right hand side of tokenizers.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3853
Differential Revision: https://secure.phabricator.com/D7049
Summary: Fixes T3834. We have some hack code here for Firefox, but I can't reproduce the original Firefox issue in modern Firefox. It's better to break weird copy/paste edge cases than all Japanese input, in any case.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3834
Differential Revision: https://secure.phabricator.com/D7024
Summary: Ref T2715. When you type "T12", etc., into the search box, use ApplicationPHIDs to try to find an object name match.
Test Plan: Typed "T12", "rP", "Q11", etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2715
Differential Revision: https://secure.phabricator.com/D6618
Summary: If `jsxmin` is not available, use a pure PHP implementation instead (JsShrink).
Test Plan:
- Ran `arc lint --lintall` on all JS and fixed every relevant warning.
- Forced minification on and browsed around the site using JS behaviors. Didn't hit anything problematic.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5670
Summary: Fixes T3140. Previously, we added the highlight class only on explicit events, but not on actual focus events (e.g., via tab).
Test Plan: Tabbed into a tokenizer. Clicked a tokenizer. Tabbed out of a tokenizer. Clicked out of a tokenizer. Shift-tabbed out of a tokenizer. Verified highlight state was always correct.
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3140
Differential Revision: https://secure.phabricator.com/D5891
Summary: For some evil design purpose.
Test Plan: Focused, blurred tokenizers.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5780
Summary:
Currently, Celerity map rebuilds on Windows don't put Stripe or Raphael into the map. Move them into `webroot/rsrc/externals/` so they get picked up.
At some point we should maybe let the mapper load resources from mulitple locations, but this is more straightforward for now.
See https://github.com/facebook/phabricator/issues/294
Test Plan: Rebuilt map, verified Burnup Rate + Stripe work.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5661
