Summary: Ref T5702. This primarily gets URI routing out of Aphront and into an Application, for consistency.
Test Plan: Loaded some pages, got static resources.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5702
Differential Revision: https://secure.phabricator.com/D10696
Summary: I'm pretty sure that `@group` annotations are useless now... see D9855. Also fixed various other minor issues.
Test Plan: Eye-ball it.
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9859
Summary: This ensure that Aphlict is always served on the primary / production domain, because the alternate file domain is intended to prevent Flash execution.
Test Plan: Confirmed this fixes the issue by visiting https://code.redpointsoftware.com.au/ and seeing notification messages.
Reviewers: joshuaspence, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9511
Summary:
This currently uses a hard-coded relative path, but should not, especially after D9401.
The major effect of this is that updated .swf files might not be served properly, and we were at the whims of the server configuration for caching/versioning behavior.
Test Plan: Enabled debug notifications, saw .swf load through Celerity.
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9421
Summary:
Ref T4222. Currently, CelerityResourceResponse holds response resources in flat maps. Instead, specify which map resources appear in.
Also, provide `requireResource()` and `initBehavior()` APIs on the Controller and View base classes. These provide a cleaner abstraction over `require_celerity_resource()` and `Javelin::initBehavior()`, but are otherwise the same. Move a few callsites over.
Test Plan:
- Reloaded pages.
- Browsed around Differential.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7876
Summary: Ref T4222. This doesn't actually support multiple sources yet, but moves us closer by getting rid of some dead and exceedingly-singletoney code.
Test Plan: Browsed around, looked at Phame blogs.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7874
Summary: Ref T4222. These are the last two "return a big ball of mud" methods. Make the API stronger so I can swap out the implementations.
Test Plan: Reloaded pages.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7871
Summary: Ref T4222. Same deal as D7867, but for this other super nebulous "return a blob of stuff" method.
Test Plan: Regenerated map, browsed around, etc.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7868
Test Plan: This is one of the rare moments where unit tests for views would be useful.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7547
Summary: Fished from logs, it probably doesn't cause any real problems.
Test Plan: Looked at logs.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5350
Summary:
For a single line, I can use the right click.
But for highlighting multiple lines, I have to wait for page reload.
It would be nice to track this in history but that's more involved.
This is actually maybe better behavior.
Test Plan: Clicked on the line link, dragged and dropped on it.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5172
Summary: Sgrepped for `"=~/</"` and manually changed every HTML.
Test Plan: This doesn't work yet but it is hopefully one of the last diffs before Phabricator will be undoubtedly HTML safe.
Reviewers: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4927
Summary:
When a developer changes CSS, it is normally sufficient to reload the page to get changes to show up, because browsers revalidate resources on reload.
However, if you reload the page and then an Ajax request adds new CSS to the page, this CSS does not trigger revalidation. The developer must currently clear their cache or re-run `scripts/celerity_mapper.php webroot`, to get this request to skip cache. We rarely use CSS over Ajax right now, so this hasn't cropped up much, but Conpherence does use this and clearing the resource is a big pain.
This seems to work fine normally, but I'm worried it might break some of the extra-celerity-resources stuff Facebook is doing.
Test Plan: In development mode, changed `conpherence/message-pane.css` and saw changes reflected on reload. Verified normal page loads do not cause additional HTTP requests. This change has no effect in production mode.
Reviewers: edward, vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2428
Differential Revision: https://secure.phabricator.com/D4902
Summary: If a page is profiled, add an "X-Phabricator-Profiler" header to all Ajax requests, and profile those too.
Test Plan: Profiled a page, checked Darkconsole, saw profiles for everything.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4885
Summary:
If you run this code:
json_encode(array('tag' => phutil_tag('div', array())));
...you get this result, because json_encode() does not call toString() on objects:
{"tag":{}}
Instead, convert such objects to their underlying strings. Javelin has support for JX.HTML and for implicit conversion (which is kind of sketchy for other reasons) but it's sort of complicated (only happens on Ajax, not behaviors) and messy (not metadata-based), so ignore it for now.
We'll need to do something similar for serialization to the database. My plan there is just to throw on any objects. The only time we put HTML in the database is cache-related and those tiny number of callsites can manually handle it.
Test Plan: Various ajax things now receive the correct data.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4684
Summary:
Created with spatch:
lang=diff
- phutil_render_tag
+ phutil_tag
(X, Y, '...')
Then searched for `&` and `<` in the output and replaced them.
Test Plan: Loaded homepage.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4503
Summary: Companion diff to D4003.
Test Plan: Rigged up a response which loaded a CSS file with `body { background: red; }`, verified page turned red after I clicked the button.
Reviewers: vrana, chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T2086
Differential Revision: https://secure.phabricator.com/D4004
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary: I think this is simpler and better than making them conditional. In properly configured installs this should have no impact (they already use a CDN URI). In not-quite-properly configured installs this will add a trivial, highly-compressible number of bytes to the source. In all cases we have less code.
Test Plan: Loaded some pages, everything worked.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3709
Summary: ...and use 'em in the phame blog case.
Test Plan: viewed blog.phabricator.dev and it actually looked right!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3666
Summary:
- `kill_init.php` said "Moving 1000 files" - I hope that this is not some limit in `FileFinder`.
- [src/infrastructure/celerity] `git mv utils.php map.php; git mv api/utils.php api.php`
- Comment `phutil_libraries` in `.arcconfig` and run `arc liberate`.
NOTE: `arc diff` timed out so I'm pushing it without review.
Test Plan:
/D1234
Browsed around, especially in `applications/repository/worker/commitchangeparser` and `applications/` in general.
Auditors: epriestley
Maniphest Tasks: T1103
2012-06-01 12:32:44 -07:00
Renamed from src/infrastructure/celerity/response/CelerityStaticResourceResponse.php (Browse further)
