Summary:
Pygments already supports Haskell and Objective-C syntax
highlighting, but the default in Phabricator excluded them from the
dropdown for the paste tool.
This adds Haskell and Objective-C to the default list of languages.
Test Plan:
Started up Phabricator sandbox instance, confirmed Haskell
and Objective-C worked in paste app.
Reviewers: vrana, epriestley
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3510
Summary:
People have occasionally complained about phabricator being slow. We have
the access log to look at to see when slowness happens, but it doesn't tell
us much about why it happened. Since it's usually a sporadic issue that's
reported, it's hard to reproduce and then profile. This change will allow us
to collect sampled profiles so we can look at them when slowness occurs.
Test Plan:
checking that sampling works correctly:
- set rate to 0; do several page loads; check no new entries in table
- set rate to 1; check that there's a new row in the table for each page load
- set rate to 10; check that some requests write to table and some don't
check new ui for samples:
- load /xhprof/list/all/, see a list with a lot of samples
- load /xhprof/list/sampled/, see only sampled runs
- load /xhprof/list/manual/, see only non-sampled runs
- load /xhprof/list/my-runs/, se only my manual runs
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3458
Summary: Rehash of D3411. In cgi/fcgi setups we have no idea if the request is HTTP or HTTPS as far as I can tell, so make this config-triggered again. Also handle @vrana's "off" case.
Test Plan: Set this flag, observed redirect to https when `$_SERVER['HTTPS']` was absent.
Reviewers: nh, vrana
Reviewed By: nh
CC: aran
Differential Revision: https://secure.phabricator.com/D3420
Summary: this is useful for certain workflows, typically where the reviewer is a gatekeeper of sorts who does the acutal commit. Special thanks to D2900 which made this relatively brain-dead to code up.
Test Plan: set to "true" in my local development environment and verified test user "xerxes" could close my stuff
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1732
Differential Revision: https://secure.phabricator.com/D3398
Summary:
I like systems that just work. It is possible to store files larger than max_allowed_packet in MySQL and we shouldn't demand it.
It also fixes a problem when file was smaller than `storage.mysql-engine.max-size` but its escaped version was larger than `max_allowed_packet`.
Test Plan: Reduced the size to 5e4, uploaded 90 kB file, checked the queries in DarkConsole, downloaded the file.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3392
Summary:
We have this hybrid "create / last few pastes" landing screen right now but I ~never use the list at the bottom and it makes the controller kind of complicated. I want to let you edit pastes too, and this generally simplifies things.
Also makes the textarea monospaced and cleans up the fork logic a bit.
Test Plan: Created, forked pastes. Viewed paste lists. Viewed pastes.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1690
Differential Revision: https://secure.phabricator.com/D3375
Summary: Allow custom LDAP port to be defined in config file
Test Plan: Test login works by specifying a custom port
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3153
Summary: The Log and PID directory should be separable in the config file
Test Plan: Start the daemons, and check if the pid and log files are stored in directories that were specified in the config file.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3149
Summary:
- These don't fit anywhere in the new design.
- Even if we figure out how to fit them in, 220px logos definitely won't fit on the 320px iPhone screen so anyone who has a custom logo will have to rework them anyway.
- Kill it for now, and once we get the new design in and working maybe we can restore it somehow.
Test Plan: Loaded local install, no logo. Grepped for config.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3101
Summary:
In some cases, we shell out to things (like Pygments for syntax highlighting).
However, on cloud servers or shared web servers, those binaries aren't always
installed system-wide.
This patch allows for appending to the environment variable $PATH, to look for
other, non-default places for these binaries.
Test Plan:
* Copied the patch over to a test OpenShift instance and applied it.
* Added the path to my local copy of Pygments (pygmentize wasn't available on the system)
into the Phabricator config.
* Refreshed a Paste page, and saw colors.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3091
Summary:
- the current LDAP auth flow expects a DN to look like
cn=ossareh,ou=Users,dc=example,dc=com
- however many LDAP setups have their dn look something like
cn=Mike Ossareh,ou=Users,dc=example,dc=com
Test Plan:
Test if logins work with a LDAP setup which has cn=Full Name
instead of cn=username.
To test you should ensure you set the properties needed to
trigger the search before login as detailed in conf/default.conf.php
Reviewers: epriestley
CC: mbeck, aran, Korvin
Differential Revision: https://secure.phabricator.com/D3072
Summary:
As we work through @chad's redesign, one thing I want to do is improve the tablet/mobile experience.
Add a "device" behavior which sets a "device-phone", "device-tablet" or "device-desktop" class on the root div. The behavior (device names, width triggers) is mostly based on Bootstrap.
Also adds a preview viewport=meta tag, which makes the iPhone not scale the page like crazy and is a desirable end state, but currently makes the app less usable since things get cut off.
Test Plan:
Added some classes like this:
.device-desktop {
background: blue;
}
.device-tablet {
background: orange;
}
.device-phone {
background: yellow;
}
...and loaded the site on a desktop, iPad and iPhone. Resized the window. Got the right background color in all cases.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D3063
Summary: MetaMTA + daemons used to be pretty hard but @nh landed some patches a while ago that make it way eaiser. Back off the "ooh scary config" text in the documentation, since this option will just work for ~every install now.
Test Plan: Read it.
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1525
Differential Revision: https://secure.phabricator.com/D3037
Summary: In order to perform the searches on Windows 2003 Server Active Directory you have to set the LDAP_OPT_REFERRALS option to 0
Test Plan: Test if LDAP works with Windows 2003 AD
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3004
Summary: This keeps people in the correct To or CC field on multiplexed messages.
Test Plan:
with multiplexing on, checked that I received an email with me in the CC
field instead of the To field for a diff I'm CC'd on.
Reviewers: epriestley, jungejason, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2999
Summary: The Graph API exposes a new field, security_settings, which allows applications to see whether a user has enabled Secure Browsing. This diff adds a configuration setting to Phabricator which forces users to have Secure Browsing enabled when logging in via Facebook.
Test Plan: With the configuration setting off, verify that secure browsing does not affect the ability to log in. With the configuration setting on and secure browsing off, verify that the login attempts is rejected. Then verify that the login attempt succeeds when secure browsing is enabled.
Reviewers: epriestley
Reviewed By: epriestley
CC: arice, aran, Korvin
Maniphest Tasks: T1487
Differential Revision: https://secure.phabricator.com/D2964
Summary:
Currently, it's hard to debug performance issues on POST pages. Add flags to stop redirects and always collect profiles.
Also fix an issue with "all" profiles. This feature is mostly just for profiling DarkConsole itself and is rarely used, I think it's been broken for some time. There's no way to get to it with the UI.
NOTE: Some JS workflows don't stop on redirect because they use JS/AJAX redirects.
Test Plan: Enabled options, browsed, got stopped on redirects and had profiles generated. Disabled options and verified redirects and profiles work normally.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2990
Summary:
See T931. LLVM users would also prefer simpler mail, and have similarly harsh opinions about the current state of affairs.
Allow installs to disable the hint blocks if they don't want them.
Test Plan: Sent myself mail with these settings on/off, got mail with/without the blocks.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T931
Differential Revision: https://secure.phabricator.com/D2968
Test Plan: Displayed `.arcconfig` and verified that it is still highlighted.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2987
Summary: Add active-directory domain-based ldap authentication support
Test Plan: Tested on a live install against Active Directory on a Windows Server
Reviewers: epriestley
CC: aran, epriestley
Maniphest Tasks: T1496
Differential Revision: https://secure.phabricator.com/D2966
Summary:
See D818 for an older attempt at this. Support code has matured to the point where the patch is pretty straightforward.
@tido, this was a long-standing request from Aditya back in the day.
Test Plan: Used `reparse.php --herald` to send myself a bunch of emails with various patch configurations. Confirmed that limits are respected, reasonable errors arise when they're violated, etc. (Timeout is a little funky but that's out of scope here, I think.)
Reviewers: btrahan
Reviewed By: btrahan
CC: tido, aran
Maniphest Tasks: T456
Differential Revision: https://secure.phabricator.com/D2967
Summary: Allow the GC daemon to collect the new markup cache.
Test Plan: Ran gc daemon in "debug" mode, saw it collect cache entries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2947
Summary: This is a fairly contentious default that we can easily move to configuration.
Test Plan: Changed the default, changed my user setting, reverted my user setting, verified the "settings" page.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2935
Summary: Did exactly what @epriestley suggested in T1428#2.
Test Plan: Turn it on in your config, post a revision, accept it. Turn it off in your config, post a revision, can't accept it.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2900
Summary: Simplify FeedQuery by making it extend from PhabricatorIDPagedPolicyQuery
Test Plan: Looked at feed on home, projects, user profile, and called `feed.query`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2905
Summary: Related to D2873.
Test Plan: Specified it and verified that highlighting still works.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2874
Summary: Add a `notification.debug` setting that shows debug info in the browser. Also improve some logging/error handling stuff and fix a bug with host names.
Test Plan: {F13098}
Reviewers: jungejason, btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T944
Differential Revision: https://secure.phabricator.com/D2810
Summary:
Support the `--verbose` flag added in D2795 in `phd`. See T1389.
Also simplify argument generation a little bit.
Test Plan: Ran "nice" daemon with debug, daemon + verbose, daemon + no verbose.
Reviewers: vrana, jungejason, edward, aurelijus
Reviewed By: aurelijus
CC: aran
Maniphest Tasks: T1389
Differential Revision: https://secure.phabricator.com/D2797
Summary:
- Add a /notification/status/ page which shows server status.
- Remove various test controllers and routes.
- Make the "no notifications" message look better.
- Move port/URI configuration to config file.
Test Plan: Started server, hit /notification/status/, saw server status.
Reviewers: allenjohnashton, ddfisher, keebuhm, jungejason
Reviewed By: jungejason
CC: aran
Maniphest Tasks: T944
Differential Revision: https://secure.phabricator.com/D2756
Summary:
This is the first step in Phabricator internationalization.
It adds a translation selector and calls it at startup.
Installations can add custom selectors to override some texts.
We can add official translations in future.
Next step is to allow user to choose his translation which will override the global one.
This is currently used only for English plurals.
Test Plan: Displayed a diff with unit test error, verified that it says 'Detail' or 'Details' and not 'Detail(s)'.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D2753
Summary: Made it possible to link and unlink LDAP accounts with Phabricator accounts.
Test Plan:
I've tested this code locally and in production where I work.
I've tried creating an account from scratch by logging in with LDAP and linking and unlinking an LDAP account with an existing account. I've tried to associate the same LDAP account with different Phabricator accounts and it failed as expected.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, auduny, svemir
Maniphest Tasks: T742
Differential Revision: https://secure.phabricator.com/D2722
Summary: First diff in a series of diffs to add notifications to Phabricator. This is the notification application ONLY. This commit does not include the changes to other applications that makes them add notifications. As such, no notifications will be generated beyond the initial database import.
Test Plan: This is part of the notifications architecture which has been running on http://theoryphabricator.com for the past several months.
Reviewers: epriestley, btrahan, ddfisher
Reviewed By: epriestley
CC: allenjohnashton, keebuhm, aran, Korvin, jungejason, nh
Maniphest Tasks: T974
Differential Revision: https://secure.phabricator.com/D2571
Summary:
- The config is called "resource-path" and the script references "resource-path", but the actual value checked for is "resource-map".
- Use nonempty(), since defaulting with getEnvConfig() will give you null if the setting exists but is set to null. This default is nearly useless so maybe we should change it to use coalesce().
- Remove Celerity map initialization from warmup. We don't currently initialize the environment in warmup, and Celerity initialization now depends on the environment.
Test Plan: Ran patch locally and on FPM-Warmup.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: hsb, aran
Differential Revision: https://secure.phabricator.com/D2662
Summary:
We have custom static resources.
We currently include them in Phabricator's celerity resource map which is causing some pain - we need to regenerate the file without our custom resources before pushing upstream, we need to discard our changes before pulling from upstream and we need to rebuild with our changes to run Phabricator.
This diff allows writing and reading the map in other location.
The plan is this - I will run `celerity_mapper.php` twice - once to build Phabricator-only resources (to push to upstream) and once to build Phabricator + ours resoruces to put in our directory.
Better solution would be to create a map just with our resources and read and combine it with Phabricator resources.
But it is complicated because we have dependencies on Phabricator resources.
Test Plan:
`celerity_mapper.php webroot`
`celerity_mapper.php webroot ../facebook/src/__celerity_resource_map__.php`
Delete Phabricator's celerity map, set 'celerity.resource-path' and successfully load Phabricator.
Reviewers: epriestley, edward
Reviewed By: epriestley
CC: aran, Koolvin
Maniphest Tasks: T721
Differential Revision: https://secure.phabricator.com/D2630
