Summary: Use `PhutilXHPASTBinary` methods instead of `xhpast_parse` functions. Depends on D11517.
Test Plan: N/A, this is a direct swap.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11612
Summary:
Ref T6881.
- Fix dead links.
- Let implementations provide more information.
- Provide more information to implementations.
Test Plan: Links work, invoices show billing periods, fewer "Subscription 6" crumbs, all is well in the world.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11601
Summary:
Ref T6881. This adds the worker, and a script to make it easier to test. It doesn't actually invoice anything.
I'm intentionally allowing the script to double-bill since it makes testing way easier (by letting you bill the same period over and over again), and provides a tool for recovery if billing screws up.
(This diff isn't very interesting, just trying to avoid a 5K-line diff at the end.)
Test Plan: Used `bin/phortune invoice ...` to get the worker to print out some date ranges which it would theoretically invoice.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11577
Summary: Fixes T1476. The body of the email should be just the output of some diff command.
Test Plan:
git diff master > text.txt; ./bin/mail receive-test --to <configured-diff-create-address> < text.txt; a diff was successfully created...! email generated had a working link to the diff.
./bin/mail receive-test --to <configured-diff-create-address> < README.md; a diff was not created as expected...! email generated had a sensical error message, telling me that the mail body should have been generated via a diff command
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: johnny-bit, Korvin, epriestley
Maniphest Tasks: T1476
Differential Revision: https://secure.phabricator.com/D11574
Summary:
Hit this locally, with an error like:
> Version <empty string> is older than 1.9, the minimum supported version.
(Where `<empty string>` was just the empty string, not literally the text `<empty string>`.)
Be more careful about parsing versions, and parse the newer string.
Test Plan: Got "unknown version" with intentionally-broken test data, then clean readout.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11558
Summary: Fixes T7078. Adds a `./bin/storage shell` command which passes through to a MySQL shell. This is slightly more convenient than running `mysql` manually.
Test Plan: Ran `./bin/storage shell` and got a MySQL shell.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7078
Differential Revision: https://secure.phabricator.com/D11548
Summary: Fixes T7034. Like HTTP, proxy requests to the correct host if a repository has an Almanac service host.
Test Plan: Ran VCS requests through the proxy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7034
Differential Revision: https://secure.phabricator.com/D11543
Summary:
Ref T7034.
In a cluster environment, when a user connects with a VCS request over SSH (like `git pull`), the receiving server may need to proxy it to a server which can actually satisfy the request.
In order to proxy the request, we need to know which repository the user is interested in accessing.
Split the SSH workflow into two steps:
# First, identify the repository.
# Then, execute the operation.
In the future, this will allow us to put a possible "proxy the whole thing somewhere else" step in the middle, mirroring the behavior of Conduit.
This is trivially easy in `git` and `hg`. Both identify the repository on the commmand line.
This is fiendishly complex in `svn`, for the same reasons that hosting SVN was hard in the first place. Specifically:
- The client doesn't tell us what it's after.
- To get it to tell us, we have to send it a server capabilities string //first//.
- We can't just start an `svnserve` process and read the repository out after a little while, because we may need to proxy the request once we figure out the repository.
- We can't consume the client protocol frame that tells us what the client wants, because when we start the real server request it won't know what the client is after if it never receives that frame.
- On the other hand, we must consume the second copy of the server protocol frame that would be sent to the client, or they'll get two "HELLO" messages and not know what to do.
The approach here is straightforward, but the implementation is not trivial. Roughly:
- Start `svnserve`, read the "hello" frame from it.
- Kill `svnserve`.
- Send the "hello" to the client.
- Wait for the client to send us "I want repository X".
- Save the message it sent us in the "peekBuffer".
- Return "this is a request for repository X", so we can proxy it.
Then, to continue the request:
- Start the real `svnserve`.
- Read the "hello" frame from it and throw it away.
- Write the data in the "peekBuffer" to it, as though we'd just received it from the client.
- State of the world is normal again, so we can continue.
Also fixed some other issues:
- SVN could choke if `repository.default-local-path` contained extra slashes.
- PHP might emit some complaints when executing the commit hook; silence those.
Test Plan: Pushed and pulled repositories in SVN, Mercurial and Git.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7034
Differential Revision: https://secure.phabricator.com/D11541
Summary:
Fixes T7019. In a cluster environment, pushes currently fail because the commit hook can't identify the instance.
For web processes, the hostname identifies the instance -- but we don't have a hostname in the hook.
For CLI processes, the environment identifies the instance -- but we don't have an environment in the hook under SVN.
Promote the instance identifier into the upstream and pack/unpack it explicitly for hooks. This is probably not useful for anyone but us, but the amount of special-purpose code we're introducing is very small.
I poked at trying to do this in a more general way, but:
- We MUST know this BEFORE we run code, so the normal subclassing stuff is useless.
- I couldn't come up with any other parameter which might ever be useful to pass in.
Test Plan: Used `git push` to push code through proxied HTTP, got a clean push.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7019
Differential Revision: https://secure.phabricator.com/D11495
Summary: Fixes T7050. I got the regexp slightly wrong and didn't catch it because it works fine on modern MySQL.
Test Plan: `arc unit --everything` still passes.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7050
Differential Revision: https://secure.phabricator.com/D11522
Summary:
One advantage I wanted to get out of T1191 is automated rebuilds of `quickstart.sql`. If they don't actually work, I'd like to know sooner rather than later. We haven't rebuilt in a couple months, so give it a shot.
Ran into two issues:
- Some very old patches specify overlong keys which don't work if your default charsets are utf8mb4. Shorten these. No real users have applied these in a very long time.
- Some gymnastics around `corpus` for the new Conpherence search index.
Test Plan:
- Ran `arc unit --everything`, got clean results.
- Cost to do a storage upgrade on an empty namespace dropped from ~4s to ~3s.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11454
Summary: I got these wrong and the test didn't trigger for some reason that I haven't looked into.
Test Plan: `arc unit --everything`
Reviewers: hach-que, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11453
Summary:
We have to do some garbage nonsense to write database backups right now, see T6996.
When storage isn't initialized, we previously ended up with this message gzipped in a file and an empty error. Make the behavior slightly more tolerable.
Test Plan: Saw a meaningful error after trying to back up an uninitialized database.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11449
Summary:
Ref T6881. I tried to cheat here by not implementing this, but we need it for destroying triggers directly with `bin/remove destroy`, since that needs to load them by PHID.
So, cheat slightly less. Implement PolicyAware but not CursorPagedPolicyAware.
Test Plan:
- Used `bin/remove destroy` to destroy a trigger by PHID.
- Browsed daemon console.
- Ran trigger daemon.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11445
Summary:
Ref T6881. This makes it easier to fire a trigger and make sure it works properly. You can use the `--now` flag to travel through time, and test scheduling conditions with `--last` and `--next`. It will tell you when the trigger would reschedule.
Better than waiting 24 hours to see if things work.
Test Plan: Fired some backups, got useful output which made me think my code probably works correctly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11438
Summary: Ref T6881. This is useful to show a "Next backup: 2:30 AM" sort of thing without requring callers to know how triggers work internally.
Test Plan: Showed that kind of thing in Instances.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11437
Summary:
Ref T6881. By design, the EXECUTION order only selects tasks which have been scheduled (since it performs a JOIN). This is inconsistent with other queries and problematic for withID/withPHID queries which may want to select an unscheduled task.
Switch to standard ID ordering by default.
Test Plan:
- Instances console now finds unscheduled triggers.
- Verified that all existing queries specify an explicit order.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11436
Summary: Ref T6881. When stuff with triggers is destroyed, it should destroy the triggers.
Test Plan: Will test in Instances.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11435
Summary: Ref T6881. Add a standard "just queue a task" trigger action; I expect almost all application code to use this.
Test Plan: Will test in Instances.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11429
Summary: Ref T6881. I just want to show trigger info in the instance management console.
Test Plan: Will test in Instances.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11428
Summary: Ref T6881. Before implementing subscriptions, I'm going to vet triggers by using them to do backups. Each instance will get a daily trigger for backups, and that should give us a smaller-scale test to catch issues and limitations, with more opportunities for something to go wrong since it fires more often.
Test Plan: Added unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11427
Summary:
Ref T6881. Hopefully, this is the hard part.
This adds a new daemon (the "trigger" daemon) which processes triggers, schedules them, and then executes them at the scheduled time. The design is a little complicated, but has these goals:
- High resistance to race conditions: only the application writes to the trigger table; only the daemon writes to the event table. We won't lose events if someone saves a meeting at the same time as we're sending a reminder out for it.
- Execution guarantees: scheduled events are guaranteed to execute exactly once.
- Support for arbitrarily large queues: the daemon will make progress even if there are millions of triggers in queue. The cost to update the queue is proportional to the number of changes in it; the cost to process the queue is proportional to the number of events to execute.
- Relatively good observability: you can monitor the state of the trigger queue reasonably well from the web UI.
- Modular Infrastructure: this is a very low-level construct that Calendar, Phortune, etc., should be able to build on top of.
It doesn't have this stuff yet:
- Not very robust to bad actions: a misbehaving trigger can stop the queue fairly easily. This is OK for now since we aren't planning to make it part of any other applications for a while. We do still get execute-exaclty-once, but it might not happen for a long time (until someone goes and fixes the queue), when we could theoretically continue executing other events.
- Doesn't start automatically: normal users don't need to run this thing yet so I'm not starting it by default.
- Not super well tested: I've vetted the basics but haven't run real workloads through this yet.
- No sophisticated tooling: I added some basic stuff but it's missing some pieces we'll have to build sooner or later, e.g. `bin/trigger cancel` or whatever.
- Intentionally not realtime: This design puts execution guarantees far above realtime concerns, and will not give you precise event execution at 1-second resolution. I think this is the correct goal to pursue architecturally, and certainly correct for subscriptions and meeting reminders. Events which execute after they have become irrelevant can simply decline to do anything (like a meeting reminder which executes after the meeting is over).
In general, the expectation for applications is:
- When creating an object (like a calendar event) that needs to trigger a scheduled action, write a trigger (and save the PHID if you plan to update it later).
- The daemon will process the event and schedule the action efficiently, in a race-free way.
- If you want to move the action, update the trigger and the daemon will take care of it.
- Your action will eventually dump a task into the task queue, and the task daemons will actually perform it.
Test Plan:
Using a test script like this:
```
<?php
require_once 'scripts/__init_script__.php';
$trigger = id(new PhabricatorWorkerTrigger())
->setAction(
new PhabricatorLogTriggerAction(
array(
'message' => 'test',
)))
->setClock(
new PhabricatorMetronomicTriggerClock(
array(
'period' => 33,
)))
->save();
var_dump($trigger);
```
...I queued triggers and ran the daemon:
- Verified triggers fire;
- verified triggers reschedule;
- verified trigger events show up in the web UI;
- tried different periods;
- added some triggers while the daemon was running;
- examined `phd debug` output for anything suspicious.
It seems to work in trivial use case, at least.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11419
Summary:
Ref T6881. This will probably make more sense in a couple of diffs, but this is a class that implements scheduling/recurrence rules. Two rules are provided:
- Trigger an event at a specific time (e.g., a meeting reminder notification).
- Trigger an event on the Nth day of every month (e.g., a subscription bill).
At some point, we'll presumably add a rule for T2896 (maybe using the "RRULE" spec) so you can do stuff like "the second to last thursday of every month", etc., but we don't need that for now.
(The "Nth day of every month, or move it back if no such day exists" rule doesn't seem to be expressible with the "RRULE" format, so implementing that wouldn't give us a superset of this. I think this rule is correct and desirable for this purpose, though.)
Test Plan: Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11403
Summary:
This is unusual, but if `getWorkerInstance()` throws we end up with an undefined `$worker` when recovering from the exception.
Instead, handle this case slightly more gracefully.
The easiest way to hit this is to schedule a task for a worker that doesn't exist (or remove an existing worker, which is what I did to hit it).
Test Plan: Saw a more graceful error recovery; ran some normal successful tasks out of the queue.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11413
Summary: Ref T6822.
Test Plan: `grep`. This method is only called from within `PhutilArgumentWorkflow::__construct`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11415
Summary: Ref T6822. This method is only called from `PhutilDaemon::execute()` and can be made `protected`.
Test Plan: See D11404.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11405
Summary: Ref T6822. This method is only called from within the `PhabricatorWorker::executeTask()` and `PhabricatorWorker::scheduleTask()` methods.
Test Plan: `grep`ped for `->doWork`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11406
Summary: Ref T6822.
Test Plan: `grep`. This method is only called from within `LiskDAO::establishConnection()`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11412
Summary: Fixes T6959.
Test Plan: When I was ready to test the feature, the "Daemon & Web config" error already showed up, from having added phd.variant-config. I went meta and changed the value of phd.variant-config to have phd.variant-config. The config error disappeared. I then changed the conpherence setting about conpherence email prefix and the error showed up again. Removing the conpherence config setting made the error disappear once more.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6959
Differential Revision: https://secure.phabricator.com/D11399
Summary:
Ref T6881. This is part 1 of my 35-step plan to support subscriptions that bill monthly.
Expanding the capabilities of counters will let me use them to create a logical clock on time-based event updates, build a daemon on top of that, and eventually get time-based triggers.
Test Plan: Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11395
Summary: Fixes T6842. Allow the daemons to always be terminated, even if MySQL is down. I was hoping to be able to optionally enable this behavior with the `--force` flag, but this seems messy.
Test Plan:
```lang=bash
> ./bin/phd start
Freeing active task leases...
Freed 1 task lease(s).
Preparing to launch daemons.
NOTE: Logs will appear in '/var/tmp/phd/log/daemons.log'.
Starting daemons as phd
Launching daemon "PhabricatorRepositoryPullLocalDaemon".
Starting daemons as phd
Launching daemon "PhabricatorGarbageCollectorDaemon".
Starting daemons as phd
Launching daemon "PhabricatorTaskmasterDaemon".
Done.
> service mysql stop
mysql stop/waiting
> ./bin/phd stop
Interrupting daemon 'PhabricatorRepositoryPullLocalDaemon' (4263)...
Interrupting daemon 'PhabricatorGarbageCollectorDaemon' (4271)...
Interrupting daemon 'PhabricatorTaskmasterDaemon' (4287)...
Daemon 4263 exited.
Daemon 4271 exited.
Daemon 4287 exited.
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6842
Differential Revision: https://secure.phabricator.com/D11385
Summary:
Fixes T6548.
- This workflow doesn't work under reasonable configurations and isn't trivial to fix (see T6548).
- We don't need it; this just makes things a little bit faster if you have to migrate everything (e.g., immediately after T1191) and the installs we know about have generally upgraded by now.
- This keeps kicking PKCS8 keys out of cache which is a pain.
Test Plan: Ran `bin/storage adjust` without it doing an implicit cache purge.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6548
Differential Revision: https://secure.phabricator.com/D11377
Summary: Ref T6822. There are a bunch of places where we call `$something->generatePHID(...)` externally (outside of the class). Therefore, these methods need to be `public`.
Test Plan: I wouldn't expect //increasing// method visibility to break anything.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11363
Summary: Ref T6822.
Test Plan: Visual inspection. This method is only called from within the `PhabricatorTestCase` class.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11245
Summary:
Ref T3165. Builds a dedicated index for Conpherence to avoid scale/policy filtering concerns.
- This is pretty one-off but I think it's generally OK.
- There's no UI for it.
- `ConpherenceFulltextQuery` is very low-level. You would need to do another query on the PHIDs it returns to actually show anything to the user.
- The `previousTransactionPHID` is so you can load chat context efficiently. Specifically, if you want to show results like this:
> previous line of context
> **line of chat that matches the query**
> next line of context
...you can read the previous lines out of `previousTransactionPHID` directly, and the next lines by issuing one query with `WHERE previousTransactionPHID IN (...)`.
I'm not 100% sure this is useful, but it seemed like a reasonable thing to provide, since there's no way to query this efficiently otherwise and I figure a lot of chat might make way more sense with a couple of lines of context.
Test Plan:
- Indexed a thread manually (whole thing indexed).
- Indexed a thread by updating it (just the new comment indexed).
- Wrote a hacky test script and got reasonable-looking query results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3165
Differential Revision: https://secure.phabricator.com/D11234
Summary: Use `PhabricatorAuditEditor` instead of `PhabricatorEdgeEditor` when writing reverts edges. This ensures that a transaction is created in addition to the edge.
Test Plan: Reverted a commit and pushed to remote. Saw a row created in `phabricator_audit.audit_transaction_comment`. Interestingly, I can't actually see the transaction at http://phabricator.local/r${CALLSIGN}${REVERTED_COMMIT_HASH}.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11212
Summary: Modernize remaining edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: Browsed around and performed various actions include subscribing, unsubscribing and watching.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11116
Summary:
Ref T2783. Ref T6706.
- Add `cluster.addresses`. This is a whitelist of CIDR blocks which define cluster hosts.
- When we recieve a request that has a cluster-based authentication token, require the cluster to be configured and require the remote address to be a cluster member before we accept it.
- This provides a general layer of security for these mechanisms.
- In particular, it means they do not work by default on unconfigured hosts.
- When cluster addresses are configured, and we receive a request //to// an address not on the list, reject it.
- This provides a general layer of security for getting the Ops side of cluster configuration correct.
- If cluster nodes have public IPs and are listening on them, we'll reject requests.
- Basically, this means that any requests which bypass the LB get rejected.
Test Plan:
- With addresses not configured, tried to make requests; rejected for using a cluster auth mechanism.
- With addresses configred wrong, tried to make requests; rejected for sending from (or to) an address outside of the cluster.
- With addresses configured correctly, made valid requests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6706, T2783
Differential Revision: https://secure.phabricator.com/D11159
Summary:
These didn't get translated quite right:
- We need to use `$total_count` because some languages have different words for 1, 2-3, and 4+ things (for example). So the strings might translate as:
- alincoln added a reviewer-one ...
- alincoln added reviewers-few ...
- alincoln added reviewers-many ...
- That is, while English has only "reviewer" and "reviewers", other languages have more plural forms, and "reviewer", "reviewers-few" and "reviewers-many" may be completely different words.
- In English, because we know we always have 2+ in this branch and the only special word is for 1, we can just drop this.
- Anyway, the %4$s stuff is counting assuming that $total_count is included in the string, so these were a off by one.
- See also D11160.
There a probably a couple more of these, but they should be easy enough to hunt down as they crop up.
Test Plan: Saw nice strings instead of empty strings, or invalid strings (after D11160).
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11162
Summary:
Removes an unused PhabricatorFeedStory Parameter from all getTitleForFeed() and getApplicationTransactionTitleForFeed() functions.
Ref D11088 Ref T6545
Test Plan: ran all unit tests and viewed some dashboard feeds
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6545
Differential Revision: https://secure.phabricator.com/D11146
Summary: Modernize Dashboard edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: Attached a panel to a dashboard, observed the expected comment in the transaction view (both ways).
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11114
Summary: Modernize Pholio edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: Attached a mock to a task, observed the expected comment in the transaction view (both ways).
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11113
Summary: Modernize Project edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: Add a member to a project, saw new rows in the `phabricator_project.edge` and `phabricator_user.edge` tables.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11111
Summary:
Ref T4411
I'm not quite sure if this is the right place for this as it will be difficult to provide proper user feedback of why we removed a particular subscriber.
Is the ApplicationTransactionEditor generally the right place to extract mentioned phids in comments?
On the other hand in some cases we cannot really give user feedback why a user was not subscribed (e.g.: commits & diffs)
Adding a diff to a repo where the user mentioned has no view permissions the subscriber is currently still added. Still would have to find where this is donet...
Any other places?
Unrelated: Is there any way to remove a subscriber from a commit/audit ?
Test Plan:
- Edited tasks with the mentioned user having view permissions to this specific task and without
- Raised concern with a commit and commented on the audit with the user having view permissions to the repo and without
- Added a commit to a repo with and without the mentioned user having permissions
- Mention a user in a task & commit comment with and without permissions
- Mentioning a user in a diff description & comments with and without permissions to the specific diff
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: chad, Korvin, epriestley
Maniphest Tasks: T4411
Differential Revision: https://secure.phabricator.com/D11049
Summary: Modernize Differential edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: From previous experience, these changes are fairly trivial and safe. I poked around a little to make sure things looked reasonably okay.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, Krenair, epriestley
Differential Revision: https://secure.phabricator.com/D11074
Summary: These are no longer required after D7076.
Test Plan: `grep`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11107
Summary: These strings are no longer required after D10678.
Test Plan: `grep`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11106
Summary: These are no longer required after D11032.
Test Plan: `grep`
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11104
Summary: Modernize Ponder edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: I couldn't actually figure out how to get these strings to show up anywhere.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Krenair, chad, epriestley
Differential Revision: https://secure.phabricator.com/D11083
Summary: Modernize Legalpad edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan:
# Created a Herald rule to require legal signatures on all diffs.
# Created a new diff.
# Saw the transaction string appear correctly.
I wasn't able to check the inverse transaction because there is none. Also, I couldn't see any text on the feed (presumably, transactions authored by Herald do not generate feed items)
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Krenair, chad, epriestley
Differential Revision: https://secure.phabricator.com/D11082
Summary:
Ref T2783. Currently, the repository edit page does some checks agaisnt the local system to look for binaries and files on disk. These checks don't make sense in a cluster environment.
Ideally, we could make a Conduit call to the host (e.g., add something like `diffusion.querysetupstatus`) to do these checks, but since they're pretty basic config things and cluster installs are advanced, it doesn't seem super worthwhile for now.
Test Plan: Saw fewer checks in a cluster repo.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11102
Summary: Ref T5402.
Test Plan:
- Queried archived tasks.
- Grepped for use sites and verified no other callsites are order-sensitive.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5402
Differential Revision: https://secure.phabricator.com/D11089
Summary: This is dead code.
Test Plan: These edge types don't actually seem to be used?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11076
Summary: I don't have `hg` yet on my new laptop; we should just skip tests if the user is missing binaries. Add a convenience method to do this.
Test Plan: Got clean `arc unit --everything` with no `hg` installed.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11051
Summary: Fixes T6795. Fixes T6813. We can give more tailored instructions for surplus schemata than we currently do, and provide more information on resolving them.
Test Plan:
- Ran `storage adjust` with just surplus schemata (friendly warning).
- Ran `storage adjust` with surplus schemata and other serious errors (more severe error).
- Read document.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6795, T6813
Differential Revision: https://secure.phabricator.com/D11054
Summary: Ref T5402. This more or less "fixes" it but there's probably some polish to do?
Test Plan:
stopped and started daemons. error logs look good.
ran bin/storage upgrade. noted that `adjust` added the appropriate indices for active and archive task.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5402
Differential Revision: https://secure.phabricator.com/D11044
Summary: Ref T5402. This cleans up some code and sets us up to use this sort of data more easily later.
Test Plan: viewed the daemon console from the web and the log of a specific archived daemon. both looked good. for other callsites looked really, really carefully.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5402
Differential Revision: https://secure.phabricator.com/D11042
Summary: Fixes T6790. Turn the old method into "new" (old signature) and "newEphemeral". Deploy "newEphemeral" as many places as possible; basically places we are not in the Differential application *and* have no intentions of ever saving the diff. These callsites are also all places we are just trying to get some changesets at the end of the day.
Test Plan: set differential application policy to 'administrators only'. viewed a commit in diffusion and it worked without any errors! i'm just using my thinkin' noodle on the other code paths.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6790
Differential Revision: https://secure.phabricator.com/D11020
Summary:
...except the transaction class itself, which still needs some knowledge of these transactions for older installs.
Ref T5245. T5604 and T5245 are now in a similar place -- there's an unknown set of bugs introduced from my changes and there's still old display code lying around with some old transactions in the database. I'll stomp out the bugs if / when they surface and data migration is up next.
This revision also adds a "TransactionPreviewString" method to the edge objects so that we can have a prettier "Bob edited associated projects." preview of this transaction.
Test Plan: added a project from task detail and saw correct preview throughout process with correct project added. bulk removed a project from some tasks. added a project from the edit details pane.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D11013
Summary:
Ref T5833. This allows Almanac ServiceTypes to define default properties for a service, which show up in the UI and are more easily editable.
Overall, this makes it much easier to make structured/usable/consistent service records: you can check a checkbox that says "prevent new allocations" instead of needing to know the meaning of a key.
Test Plan: {F251593}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10996
Summary:
Ref T6742. Root cause of the issue:
- Daemon was running on a machine with a very long host name, which produced a lease name which was longer than 64 characters.
- MySQL wasn't set in STRICT_ALL_TABLES.
- The daemon would `UPDATE .. SET leaseOwner = <very long string>` to lock a task, and MySQL would silently truncate.
- The daemon would then try to select the locked task, but fail, because there's no matching lease owner.
To resolve this, use only the first 32 characters of the hostname. See IRC for more discussion.
Test Plan: Will confirm with reporter.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6742
Differential Revision: https://secure.phabricator.com/D10998
Summary: Fixes T6595. This diff has two issues as is... 1) the differential data fetching is pretty cheesey, but it looks like we can't just issue three separate databases to get the right data? 2) the translations break, since I am turning this into a string (and not an int) so the whole pluralization bit fails. I think 1 is okay as is and 2 needs to be fixed though I am not sure how to best do that...
Test Plan: loaded home page and it looked nice...!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6595
Differential Revision: https://secure.phabricator.com/D10979
Summary:
Fixes T6702. Ref T3554. Currently, tasks can be cancelled, retried and freed from the web UI by any logged in user.
This isn't appreciably dangerous (I can't come up with a way that a user could do anything security-affecting), but I think I probably intended this to be admin-only, but these actions should move to the CLI anyway.
Move them to the CLI. Lay some groundwork for some future `bin/worker cancel --class SomeTaskClass`, but don't implement that yet.
Test Plan: Used `cancel`, `retry` and `free` from the CLI. Hit all the error/success states.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3554, T6702
Differential Revision: https://secure.phabricator.com/D10939
Summary:
Fixes T6619. In `{Xnnn key=value, key=value}` we did not require a separator between the object and the key-value part. This could lead to `{rX11aaa}` being parsed as `{rX11 aaa}`, i.e. a reference to `rX11` with parameter `aaa` set.
Instead, require a space or comma before we'll parse key-value parts of embedded objects.
Test Plan:
Added and executed unit tests.
{F242002}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6619
Differential Revision: https://secure.phabricator.com/D10915
Summary: See <https://phabricator.wikimedia.org/T906>. This behavior is a bug; we should remove the button if the user can't use the application.
Test Plan:
- With Macro uninstalled, did these things verifying the button vanished:
- Sent a user a message.
- Edited a revision.
- Edited repository basic information.
- Edited an initiative.
- Edited a Harbormaster build step.
- Added task comments.
- Edited profile blurb.
- Edited blog description.
- Commented on Pholio mock.
- Uploaded Pholio image.
- Edited Phortune merchant.
- Edited Phriction document.
- Edited Ponder answer.
- Edited Ponder question.
- Edited Slowvote poll.
- Edited a comment.
- Reinstalled Macro and saw button come back.
- Used button to put silly text on a funny picture.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10900
Summary:
Ref T6615. Mixing ASC and DESC ordering on a multipart key makes it dramatically less effective (or perhaps totally ineffective).
Reverse the meaning of the `priority` column so it goes in the same direction as the `id` column (both ascending, lower values execute sooner).
Test Plan:
- Queued 1.2M tasks with `bin/worker flood`.
- Processed ~1 task/second with `bin/phd debug taskmaster` before patch.
- Applied patch, took ~5 seconds for ~1.2M rows.
- Processed ~100-200 tasks/second with `bin/phd debug taskmaster` after patch.
- "Next in Queue" query on daemon page dropped from 1.5s to <1ms.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aklapper, 20after4, epriestley
Maniphest Tasks: T6615
Differential Revision: https://secure.phabricator.com/D10895
Summary: Ref T6615. Ref T3554. We need better tooling around the queue eventually, so start here.
Test Plan: Added 100K+ tasks locally with `bin/worker flood`. Executed some of them with `bin/phd debug taskmaster` (we already have a TestWorker, used in unit tests).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3554, T6615
Differential Revision: https://secure.phabricator.com/D10894
Summary: Fixes T3189. Now if you say #projects in a commit message they will associate nicely with the commit. Also we record transactions about all this project editing fun.
Test Plan: tested migration by associating some projects with commits and verifying they still showed up post migration. tested adding / removing projects by doing so from the UI, noting transactions written nicely as well
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Projects: #projects
Maniphest Tasks: T3189
Differential Revision: https://secure.phabricator.com/D10877
Summary: Fixes T6152, T6237. This introduces a viewPolicy column to the DifferentialDiff, and re-jiggers the DifferentialDiff policy implementation such that things behave as before once associated with a revision, else use the DifferentialDiff policy column value.
Test Plan: made a diff with a non-standard view policy and noted that policy was still selected in the revision step. arc lint.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6237, T6152
Differential Revision: https://secure.phabricator.com/D10875
Summary: Ref T6343, adding HTMLMailMode to remarkup, and most objects should now be processed and appear pretty in emails.
Test Plan: Add a comment to a Maniphest task containing a mention of an object like '{T1}' or 'T1'. Emails should show a styled version of the object similar to how the object looks in the context of the Maniphest task in the UI.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin, epriestley
Maniphest Tasks: T6343, T2617
Differential Revision: https://secure.phabricator.com/D10859
Summary:
Ref T6238. I'm building the instance management application now, but not putting it in the upstream -- I think the only use case for it is to build SAAS. If someone comes up with a use case (maybe a college course that wants to create an instance per-class or something?) we could open it up eventually, but it seems cleaner to keep it out of the upstream until we have such a use case.
I need to add schema patches. Make it easier for a subclass to just "add all the patches in this directory", like "autopatches/" works.
Test Plan:
- Ran `bin/storage status`, saw all normal patches still valid.
- In some future diff, the instances application will use this to apply patches.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6238
Differential Revision: https://secure.phabricator.com/D10848
Summary:
Fixes T6543. This was slightly trickier than I thought.
The actual inputs to this are: author, total affected count, added count, added list, removed count, removed list.
We weren't accounting for "total affected count" (used to select the correct word for "reviewers", e.g. "reviewers-few" vs "reviewers-many").
Test Plan: {F233357}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6543
Differential Revision: https://secure.phabricator.com/D10846
Summary:
Fixes T5492. I figured this would be easier to just fix than write a guide for; it actually took me an hour, but I spent like 75% of that futzing with my editor.
- The Move controller currently accepts either a slug or an ID. I can't find any callsites which pass a slug, and this doesn't make sense. Pretty sure this was copy/pasted from Edit or something. Only accept IDs.
- Slightly modernize the Move controller (newDialog(), handleRequest(), $viewer).
- When the user enters a bad slug, warn them that we're going to fix it for them and let them accept or reject the changes.
- Don't prefill the edit note (this feels inconsistent/unusual).
- On the form, label the input "Path" instead of "URI".
- Show the old path, to help remind the user what the input should look like.
- When a user tries to do a no-op move, show a more tailored message.
- When the user tries to do an overwriting move, explain how they can fix it.
- When normalizing a slug like `/question/???/mark/`, make it normalize to `/question/_/mark`.
Test Plan:
- Tried to move a document to itself.
- Tried to overwrite a document.
- Did a bad-path move, accepted corrected path.
- Did a good-path move.
- Did a path move with a weird component like `/???/`.
- Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5492
Differential Revision: https://secure.phabricator.com/D10838
Summary:
Fixes T1191. I'll write up the changelog with notes about this and open a feedback task for followups.
When you run `storage upgrade`, automatically run `storage adjust` afterward. Provide a flag to disable this.
This brings everyone into the utf8mb4 world.
Test Plan: Ran `bin/storage upgrade` with various flags. Ran `bin/storage adjust`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10800
Summary:
Ref T1191. Use `storage quickstart` to regenerate `quickstart.sql` using modern schema construction statements.
This puts new installs into utf8mb4 mode immediately without requiring storage adjustment.
Test Plan:
- Ran `arc unit --everything`, which uses quickstart.
- Ran `bin/storage upgrade --namespace temp`, to quickstart a new namespace.
- Ran `bin/storage upgrade --namespace temp --disable-utf8mb4`, to quickstart a new namespace without utf8mb4 support.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10797
Summary:
Fixes T2792. This adds a pluggable configuration layer between all the stuff on disk (local/file) and the runtime configurable stuff (database).
An install can subclass this source and:
- For Phacility, query a remote service (like Almanac) to retrieve hostname-based configuration, allowing one install to serve multiple instances.
- Maybe for Phacility, query a remote service (like Phlux) to retrieve sitevar-like configuration (e.g., put everything in readonly mode to deal with a maintenance issue?). Not sure if we'll do this or not. We might just nuke Phlux since Almanac is sort-of-a-superset of it for our purposes.
- For third parties, query some other remote service if that makes config management easier. In particular, it would theoretically let you put locked config in Zookeeper or whatever else you want.
Test Plan: Added a fake source and saw it inject configuration.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2792
Differential Revision: https://secure.phabricator.com/D10787
Summary:
Ref T1191. Currently if a developer forgot to specify a column type, `storage adjust` aborts explosively mid-stream. Instead:
- Make this a formal error with an unambiugous name/description instead of something you sort of infer by seeing "<unknown>".
- Make this error prevent generation of adjustment warnings, so we don't try to `ALTER TABLE t CHANGE COLUMN c <unknown>`, which is nonsense.
- When schemata errors exist, surface them prominiently in `storage adjust`.
Overall:
- Once `storage upgrade` runs `storage adjust` automatically (soon), this will make it relatively difficult to miss these errors.
- Letting these errors slip through no longer escalates into a more severe issue.
Test Plan:
Commented out the recent `mailKey` spec and ran `storage adjust`:
```
$ ./bin/storage adjust --force
Verifying database schemata...
Found no adjustments for schemata.
Target Error
phabricator2_phriction.phriction_document.mailKey Column Has No Specification
SCHEMATA ERRORS
The schemata have serious errors (detailed above) which the adjustment
workflow can not fix.
If you are not developing Phabricator itself, report this issue to the
upstream.
If you are developing Phabricator, these errors usually indicate that your
schema specifications do not agree with the schemata your code actually
builds.
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10771
Summary:
Fixes an issue with T5336 / D9871. We did 99% of the work here but didn't actually turn on the priority sorting. The unit test passed by default, which didn't catch this.
- Fix the unit test (it failed).
- Fix the query (test now passes).
- Add a "Next in Queue" element to the UI to make this kind of thing easier to spot/understand.
Test Plan: Ran unit test. Viewed "Next in Queue". Queued some tasks, flushed the queue. Web UI tracked the state sensibly.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: cburroughs, epriestley
Differential Revision: https://secure.phabricator.com/D10766
Summary:
Ref T1191. Notable stuff:
- Adds `--disable-utf8mb4` to `bin/storage` to make it easier to test what things will (approximately) do on old MySQL. This isn't 100% perfect but should catch all the major stuff. It basically makes us pretend the server is an old server.
- Require utf8mb4 to dump a quickstart.
- Fix some issues with quickstart generation, notably special casing the FULLTEXT handling.
- Add an `--unsafe` flag to `bin/storage adjust` to let it truncate data to fix schemata.
- Fix some old patches which don't work if the default table charset is utf8mb4.
Test Plan:
- Dumped a quickstart.
- Loaded the quickstart with utf8mb4.
- Loaded the quickstart with `--disable-utf8mb4` (verified that we get binary columns, etc).
- Adjusted schema with `--disable-utf8mb4` (got a long adjustment with binary columns, some truncation stuff with weird edge case test data).
- Adjusted schema with `--disable-utf8mb4 --unsafe` (got truncations and clean adjust).
- Adjusted schema back without `--disable-utf8mb4` (got a long adjustment with utf8mb4 columns, some invalid data on truncated utf8).
- Adjusted schema without `--disable-utf8mb4`, but with `--unsafe` (got truncations on the invalid data).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10757
Summary:
Fixes T6416. The comment is consistent with intent, but the actual regexp doesn't quite work right. In particular, we incorrectly match `#security.` as `security.` (with a period) instead of `security` (with no period).
Since this stuff is a pain to test and I evidently got it wrong in this case in D8703, make it unit testable.
Test Plan:
Added unit tests. Also:
{F227181}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6416
Differential Revision: https://secure.phabricator.com/D10753
Summary: Fixes T6399. This allows you to use global search to find projects by searching for text in their descriptions.
Test Plan: Added a unique word to a project description, reindexed it, searched, got a hit.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6399
Differential Revision: https://secure.phabricator.com/D10748
