Summary:
Follows Phabricator's feed and puts notifications into channels
that are configured.
~~notification.all - bool - 1:1 stories to messages~~
notification.types - array - Specific story types to notify for - ["differential", "maniphest"]
notification.verbosity - int - Range of 0-3 for verbosity
notification.max_pages - int - Maximum number of pages to go back per poll
notification.page_size - int - Size of pages (limit) to poll
~~notification.channels - array - Array of channels to send messages to~~
~~notification.sleep - int - Seconds to sleep between polls~~
Test Plan: Run phabot with various configuration options
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, asherkin
Differential Revision: https://secure.phabricator.com/D4418
Summary: Used only by Facebook.
Test Plan: Moved to Facebook repo and verified it still works.
Reviewers: nh, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4515
Summary: Ports mail stuff from the existing setup process to the more modular setup checks.
Test Plan: Configured my local install to have all these errors, verified setup raised them.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4494
Summary:
Read configuration from the new database source.
This adds an extra MySQL connect + query to every page. They're very cheap so I think we can suffer them for now, but I'd like to put cache in front of this at some point. The difficulties are:
- If we use APC, multi-frontend installs (Facebook) can't dirty it (major problem), and the CLI can't dirty it (fine for now, maybe a major problem later).
- If we use Memcache, we need to add config stuff.
- We could use APC in all non-Facebook installs if we can make it dirtyable from the CLI, but I don't see a reasonable way to do that.
- We don't have any other caches which are faster than the database.
So I'll probably implement Memcache support at some point, although this is a lame excuse for it.
Test Plan: Added some config values via web UI, saw them active on the install.
Reviewers: btrahan, codeblock, vrana
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2221
Differential Revision: https://secure.phabricator.com/D4296
Summary:
Currently, we have a "config" panel in DarkConsole. It's useful to have a table of all effective config values, but it doesn't need to be in DarkConsole. Move it to Config instead. Basically:
- You don't need to activate DarkConsole to see it anymore;
- now visible only to admins;
- respects config mask/hide;
- somewhat prettier;
- links to config edit;
- no longer ships down on every DarkConsole request with a giant table of rarely-used data.
Test Plan: Looked at the table. Looked at lack of table in darkconsole.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4473
Summary:
Port MetaMTA options for Owners, Pholio and Macro.
At some point I'd like to get rid of all these options (provide one "reply domain", and not allow overrides of reply handlers -- use events instead) but that's a battle we can fight later.
Test Plan: Looked at options, looked at setup issues, edited something.
Reviewers: codeblock, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4469
Summary: Some views expose some/most/all of the basics (id, class, sigil, metadata, etc); let them extend a dedicated view to get it for free.
Test Plan: Viewed home page, paste, mobile dropdown, etc.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4440
Summary: Implement Diffusion MetaMTA options. Also make the fake '{{config.option}}' rule work, and use Remarkup to render summaries as well as descriptions.
Test Plan: Looked at Diffusion rules, edited some, looked at setup issues, verified '{{config.option}}' linked to the right option.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4466
Summary:
See discussion in D4438. Allows users to customize application tiles, and implements generally reasonable defaults so they hopefully won't.
Sizes are "invisible" (internal only, used to hide admin apps from non-admins), "hidden" (hide by default, show after clicking "Show More Applications"), "show" (show a small square tile) and "full" (show a full-width tile with subtitle).
Test Plan:
Default view for a non-admin:
{F29375}
Adjusted settings, hidden:
{F29373}
Adjusted settings, shown:
{F29374}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4439
Summary:
No fancy-pants smarty stuff yet, but merges /applications/ and the awful application buttons into the dark navigation.
Hover state is maybe a little weird.
Test Plan: {F29324}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran, btrahan, codeblock
Differential Revision: https://secure.phabricator.com/D4431
Summary: Allows to easily disable responding to "where is..."
Test Plan: Run ircbot with and without the handler
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4444
Summary:
Port PHPMailer options. Also:
- Don't show values on config lists if they're masked (this is mostly for passwords, to prevent them from being idly/accidentally disclosed).
- Don't show "default" icon -- just show an icon if the value has been customized. This makes it easier to pick out custom values.
Test Plan: Looked at / edited mailer values.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4441
Summary: One setting.
Test Plan:
- Looked at the setting in the web interface.
- Waved to it
- Introduced myself
- Had a nice conversation
- Made a new friend
- Turns out `phriction.enabled` is a nice guy.
Reviewers: epriestley, chad
Reviewed By: chad
CC: aran, Korvin
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4436
Summary:
This is a half-step toward one-up and test renderers. This is mostly a structural change, and has no user-facing impact. It splits the rendering hierarchy like this:
- Renderer (more methods are abstract than before)
- HTML Renderer (most HTML stuff has moved down from the base to here)
- HTML 1-up (placeholder only -- not yet a functional implementation)
- HTML 2-up (minimal changes, uses mostly old code)
- Test Renderer (unit-testable renderer base, implements text versions of the HTML stuff)
- Test 1-up (selects 1-up mode for test rendering)
- Test 2-up (selects 2-up mode for test rendering)
Broadly, I'm trying to share as much code as possible by splitting rendering into more, smaller stages. Specifically, we do this:
- Combine the various sorts of inputs (changes, context, inlines, etc.) into a single, relatively homogenous list of "primitives". This happens in the base class.
- The primitive types are: old (diff left side), new (diff right side), context ("show more context"), no-context ("context not available") and inline (inline comment).
- Possibly, apply a filtering/reordering step to the primitives to get them ready for 1-up rendering. This mostly removes information, and does a small amount of reordering. This also happens in the base class.
- Pass the primitives to the actual renderer, to convert them into HTML, text, or whatever else. This happens in the leaf class.
The primitive implementation is not yet complete (it doesn't attach as much information to the primitives as it should -- stuff like coverage and copies), but covers the basics.
The existing HTMLTwoUp renderer does not use the primitive path; instead, it still goes down the old path.
Test Plan: Ran unit tests, looked at a bunch of diffs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D4421
Summary:
- Move `prettyPrintJSON()` and make it static.
- Use it from `PhabricatorSetupIssueView`
- Update other `config/` places that use it to call it from the new class.
This fixes a bug in `PhabricatorSetupIssueView` which showed up if the value
was an array and couldn't be rendered by `phutil_escape_html()`.
Test Plan:
- Rendered some config options.
- Went to /config/issue/config.unknown.phame.skins/ without error.
Reviewers: epriestley, btrahan, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4411
Summary:
Fixes the two-level nav issue introduced by D4376.
(My claim that this page is device ready in the code is something of a lie, but it's fairly close.)
(@chad, this could use an icon at some point, or you can point me at which one you want and I can take a stab at slicing it.)
Test Plan: Looked at feed; saw it not-broken. Also checked public feed (which should just merge at some point).
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4381
Test Plan: Quick view of each option in the web interface.
Reviewers: epriestley, btrahan, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4386
Summary: introducing a new friend called DifferentialHunkParser. Sort of like the DifferentialChangesetParser but works with hunks only. tried to grab hunk parsing type things from across the code base and move them into this new class.
Test Plan: unit tests and played around in Differential a bit.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D4351
Summary:
This implements most/all of the difficult parts of Diviner on top of Phabricator instead of as standalone components. See T988. In particular, here are the things I want to fix:
**Performance** The Diviner parser works in two stages. The first stage breaks source files into "Atoms". The second stage renders atoms into a display format (e.g., HTML). Diviner currently has a good caching story on the first step of the pipeline, but zero caching in the second step. This means it's very slow, even for a fairly small project like Phabricator. We must re-render every piece of documentation every time, instead of only changed documentation. Most of this diff concerns itself with addressing this problem. There's a fairly large explanatory comment about it, but the trickiest part is that when an atom changes, other atoms (defined in other places) may also change -- for example, if `class B extends A`, editing A should dirty B, even if B is in an entirely different file. We perform analysis in two stages to propagate these changes: first detecting direct changes, then detecting indirect changes. This isn't completely implemented -- we need to propagate 'extends' through more levels -- but I believe it's structurally correct and good enough until we actually document classes.
**Inheritance** Diviner currently has a very weak story on inheritance. I want to inherit a lot more metas/docs. If an interface documents a method, we should just pull that documentation in to every implementation by default (implementations can still override it if they want). It can be shown in grey or something, but it should be desirable and correct to omit documentation of a method implementation when you are implementing a parent. Similarly, I want to pull in inherited methods and @tasks and such. This diff sets up for that, by formalizing "extends" relationships between atoms.
**Overspecialization** Diviner currently specializes atoms (FileAtom, FunctionAtom, ClassAtom, etc.). This is pretty much not useful, because Atomizers (which produce the atoms) need to be highly specialized, and Renderers/Publishers (which consume the atoms) also need to be highly specialized. Nothing interesting actually lives in the atom specializations, and we don't benefit from having them -- it just costs us generality in storage/caches for them. In the new code, I've used a single Atom class to represent any type of atom.
**URIs** We have fairly hideous URIs right now, which are very cumbersome For in-app doc links, I want to provide nice URIs ("/h/notfications" or similar) which are stable redirects, and probably add remarkup for it: !{notifications} or similar. This diff isn't related to that since it's too premature.
**Search** Once we have a database generation target, we can index the documentation.
**Design** Chad has some nice mocks.
Test Plan: Ran `bin/diviner generate`, `bin/diviner generate --clean`. Saw appropriate graph propagation after edits. This diff doesn't do anything very useful yet.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T988
Differential Revision: https://secure.phabricator.com/D4340
Test Plan: Looked at them in the web UI.
Reviewers: epriestley, chad, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4355
Test Plan: Looked at the setting and available options from the dropdown.
Reviewers: epriestley, chad
Reviewed By: chad
CC: aran, Korvin
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4354
Summary: Also provide a way to update old files metadata.
Test Plan: Create a revision which includes a image file. Check whether the widht, height metadata exists. Run `scripts/files/manage_files.php metadata --all` to update previously uploaded files.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2101
Differential Revision: https://secure.phabricator.com/D4347
Summary:
Adds the translations group as per T2255. Currently `translation.override` is
`wild` -- it should be changed to dict<string, string> when that exists.
Also fixes a small bug from D4326 which caused "class" types to not ever
validate.
Test Plan:
- Looked at the settings.
- Successfully saved a setting relating to classes.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4350
Summary: Bring these over. Also sort the group list.
Test Plan: Viewed config.
Reviewers: btrahan, codeblock, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4338
Summary:
- Ports MySQL settings to PHP.
- Removes "mysql.retries" -- this existed only because Magic Numbers Are Bad, but there is no concievable reason it should ever be set to anything other than 3.
- Introduced "Hidden" config, which isn't visible from the web (for SaaS, we'll just mark anything with secret keys as "hidden").
- Introduced "Masked" config, which will be masked in darkconsole once that gets updated.
- "Hidden" implies "Masked" and "Locked".
- Moved "storage.default-namespace" here -- it probably makes more sense than core; this was my bad in T2255.
- Put cancel button back for hidden/locked config.
- Introduce 'class' config type.
Test Plan: Viewed MySQL options. None are editable.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4326
Summary: Added all the "Security" group options listed in T2255.
Test Plan:
- Looked at all the options.
- Tested validation on `security.alternate-file-domain`
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4334
Summary: Refs T2255 and takes care of the "EXTENDING PHABRICATOR" group thereof.
Test Plan: Looked at each of the new options.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4325
Summary: This config section is weak (poorly documented) and inconsistent (keys with "_" instead of "-") but I'm going to keep punting on improving it until after T1536.
Test Plan: Loaded, examined LDAP config.
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4322
Summary:
- Move GC options into PHP.
- Remove the "run at" and "run for" options. The GC daemon doesn't actually do any table scans, is very gentle, and runs for like 3 seconds per day in any normal install. Just limit it to running once every 4 hours when it's caught up and call it a day.
Test Plan: Edited GC options.
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4321
Summary: This is more or less a copy of the validation which lives in `webroot/index.php` right now, but I don't want to wipe that out just yet because there's no way for normal users to see this new validation.
Test Plan: Tried to set "phabricator.base-uri" to crazy nonsense, was harshly rebuffed.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4316
Summary:
- Allows us to implement setup warnings for edits which don't go through the web UI, e.g. "you edited a config file and set value X to something goofy".
- Allows us to implement more sophisticated validations, beyond basic type checks (e.g., "phabricator.base-uri" must be a URI).
- Fixes T358 (or, close enough -- fixes it for all options which have been migrated as per T2255.
Test Plan: Set "darkconsole.enabled" to "xyz" in my config, observed setup warning. Added fake validation, observed web UI edit error.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255, T358
Differential Revision: https://secure.phabricator.com/D4315
Summary: Use ApplicationTransactions in Config to create an edit history. Resolves T2256.
Test Plan: {F28477}
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2256
Differential Revision: https://secure.phabricator.com/D4314
Summary: Show the value for all loaded configuration sources.
Test Plan:
{F28469}
{F28470}
{F28471}
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4312
Summary: Also improve behavior for the "unknown config" warning.
Test Plan: Looked at configs, went through unknown config workflow.
Reviewers: btrahan, codeblock
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4310
Summary:
- Add a "developer" option group.
- Add an "access log" option group.
- Render the types "bool", "int" and "string" in a more tailored way.
- Add a config check for dead config. Right now this serves as a "TODO" list of things that need to be migrated.
Test Plan: Looked at config options, setup issues. Edited bool, int, string options.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4308
Summary:
- When a setup issue is nonfatal (i.e., a warning), instruct the user to edit the value from the web UI instead of using `bin/config`.
- When the user edits configuration in response to a setup issue, send them back to the issue when they're done.
- When an issue relates to PHP configuration, link to the PHP documentation on configuration.
- Add new-style setup check for timezone issues.
Test Plan: Mucked with my timezone config, resolved the issues I created.
Reviewers: codeblock, btrahan, vrana
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2221, T2228
Differential Revision: https://secure.phabricator.com/D4298
Summary: Ref T2255. Ref T2221. Lay the groundwork to move configuration into PHP, so we can show descriptions in the web UI, do typechecking, disable application options when an application is uninstalled, etc.
Test Plan:
{F28421}
{F28420}
{F28422}
Reviewers: codeblock, btrahan, vrana
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2221, T2255
Differential Revision: https://secure.phabricator.com/D4306
Summary:
This is basicaly a light version of D4286. The major problem with D4286 is that it's a huge leap and completely replaces the setup process in one step.
Instead, I want to do this:
- Add the post-setup warnings (yellow bar with "6 unresolved warnings...").
- Copy all setup checks into post-setup warnings (so every check has an old-style check and a new-style check).
- Run that for a little bit and make sure it's stable.
- Implement fatal post-setup checks (the red screen, vs the yellow bar).
- Run that for a little bit.
- Nuke setup mode and delete all the old checks.
This should give us a bunch of very gradual steps toward the brave new world of simpler setup.
Test Plan:
- Faked APC setup failures, saw warnings raise.
- Verified that this runs after restart (get + set).
- Verified that this costs us only one cache hit after first-run (get only).
Reviewers: btrahan, codeblock, vrana, chad
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4295
