Summary: Fixes T1812. Moves the internal configuration into public space and documents it.
Test Plan:
- Tried to set it to some invalid stuff.
- Set it to various valid things.
- Browsed around, changed statuses, filtered statuses, viewed statuses, merged duplictes, examined transaction record, created tasks.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8585
Summary: This can be used to lock yourself out of an instance, so prevent web edits.
Test Plan: Loaded page, wasn't web-editable.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8572
Summary:
- Point them at the new Diviner.
- Make them a little less cumbersome to write.
Test Plan: Found almost all of these links in the UI and clicked them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8553
Summary:
This is the other half of D8548. Specifically, the attack here was to set your own editor link to `javascript\n:...` and then you could XSS yourself. This isn't a hugely damaging attack, but we can be more certain by adding a whitelist here.
We already whitelist linkable protocols in remarkup (`uri.allowed-protocols`) in general.
Test Plan:
Tried to set and use valid/invalid editor URIs.
{F130883}
{F130884}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8551
Summary: Ref T2222. These no longer have an effect, and are obsoleted by `differential.fields`.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8468
Summary:
A user reported this stack trace:
http://pastebin.com/6auGbZsE
...on this GitHub issue:
https://github.com/facebook/phabricator/issues/389#issuecomment-36612511
The problem is similar to the original report, but not identical. In this case, we're following a sequence of steps like:
- Run setup checks.
- Check for enabled providers, in order to raise "no providers configured yet" warning.
- Try to generate login/redirect URIs.
- Build the request.
- Set the default base URI.
- Run normal code.
Since we try to generate URIs before we provide a default, this fatals. Instead, don't try to build objects.
An alternative fix might be to try to set defaults earlier, but we depend on some config and on building the Request in order to be able to figure out if a request is HTTP or HTTPS right now. We could assume one, or guess, or use protocol-relative URIs (`///host.com`), but I think this fix is a little cleaner overall. If we keep hitting similar stuff, we could look into alternate fixes.
We could also set some kind of "setup mode" flag and make `getURI()` if it's called during setup mode to detect these during testing. I'd like to hit one more of these before doing that, though.
Test Plan: Reproduced the issue, applied the patch, verified this fixes it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8395
Summary: Ref T2222. This will probably have some rough edges for a bit (e.g., weird cases I didn't remember or think of), but there's no change to the underlying data and we can easily revert if things get too messy.
Test Plan: Looked at a variety of revisions and saw sensible output.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8361
Summary:
See D8308. Enabling STRICT_ALL_TABLES prevents this entire class of error, by fataling on truncation instead of truncating. We never want truncation; it is always bad and sometimes extremely bad.
We've recommended this mode for developer installs for a long time, and some users run with it enabled, so it's very unlikely to cause any issues (I've had it enabled locally for at least 6-8 months, I think).
Test Plan:
- Disabled mode.
- Saw warning.
- Enabled mode.
- No warning.
{F117040}
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran, arice
Differential Revision: https://secure.phabricator.com/D8309
Summary:
Ref T3886. Ref T418. For fields like "Summary" and "Test Plan" where changes can't be summarized in one line, allow CustomField to provide a "(Show Details)" link and render a diff.
Also consolidate some of the existing copy/paste, and simplify this featuer slightly now that we've move to dialogs.
Test Plan:
{F115918}
- Viewed "description"-style field changes in phlux, pholio, legalpad, maniphest, differential, ponder (questions), ponder (answers), and repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886, T418
Differential Revision: https://secure.phabricator.com/D8284
Summary:
Ref T4420. Tokenizers currently operate in "preload" or "ondemand" modes. In the former mode, which is default, they'll try to load the entire result list when a page loads.
The theory here was that this would slightly improve the experience for small installs, and once they got big enough they could switch to "ondemand". In practice, several issues have arisen:
- We generally don't have a good mechanism for telling installs that they should tweak perf config -- `metamta.send-immediately` is the canonical example here. Some large installs are probably affected negatively by not knowing to change this setting, and having settings like this is generally annoying.
- We have way way too much config now.
- With the advent of ApplicationSearch, pages like Maniphest make many redundant loads to prefill sources like projects. Most of the time, this data is not used. It's far simpler to switch everything to ondemand than try to deal with this, and dealing with this would mean creating two very complex divergent pathways in the codebase for a mostly theoretical performance benefit which only impacts tiny installs.
- We've been using `tokenizer.ondemand` forever on `secure.phabricator.com` since we have many thousands of user accounts, and it doesn't seem sluggish and works properly.
Removing this config is an easy fix which makes the codebase simpler.
I've retained the ability to use preloaded sources, since they may make sense in some cases (in at least one case -- task priorities -- adding a static source pathway might make sense), and they're part of Javelin itself. However, the code will no longer ever go down that pathway.
Test Plan: Used `secure.phabricator.com` for years with this setting enabled.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8232
Summary:
As you've suggested, I took the SendGrid code and massaged it until it played nice with Mailgun.
btw - unless I'm missing something, it appears that the SendGrid receiver lets you spoof emails (it performs no validation on the data received).
Test Plan: Opened a task with Mailgun. Felt great.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4326
Differential Revision: https://secure.phabricator.com/D7989
Summary:
From @chad. This setup link should open in a new window so you don't lose your context in resolving setup issues.
@chad, this was the only one I could find immediately, let me know if you remember seeing others that I missed.
Test Plan: Faked an error, clicked the link, got a new tab.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7991
Summary: Cookie-prefix should fix phabricator instances where x.com and x.y.com have conflicting cookie names
Test Plan: Pushed branch to dev.phab.example.com, logged into phab.example.com and into dev.phab.example.com.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7979
Summary:
Ref T4310. Fixes T3720. This change:
- Removes concurrent session limits. Instead, unused sessions are GC'd after a while.
- Collapses all existing "web-1", "web-2", etc., sessions into "web" sessions.
- Dramatically simplifies the code for establishing a session (like omg).
Test Plan: Ran migration, checked Sessions panel and database for sanity. Used existing session. Logged out, logged in. Ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7978
Summary:
Ref T3857.
- Always send mail via daemons. This lets us get rid of this config, and is generally much more performant.
- After D7964, we warn if daemons aren't running.
Test Plan: Sent some mail.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7965
Summary:
Currently, we try to mostly-kind-of-work if daemons aren't running (for example, we send mail in-process). I want to stop doing this. A major motivator is that `metamta.send-immediately` is confusing for a lot of users and frequently the cause of performance problems. Increasingly, functionality of applications depends on the daemons (Harbormaster, Drydock, Nuance all require daemons to do anything at all). They're also fairly stable/robust/well-tested and no reasonable install should be running without them.
This will let us simplify or remove some flags (like `metamta.send-immediately`) and simplify some other processes like search indexing.
Test Plan: Stopped daemons, loaded warnings, saw daemon warning. Started daemons, reloade, no warning.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7964
Summary: This removes the bulk of the "Form Errors" text, some variations likely exists. These are a bit redundant and space consuming. I'd also like to back ErrorView more into PHUIObjectBox.
Test Plan: Test out the forms, see errors without the text.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran, hach-que
Differential Revision: https://secure.phabricator.com/D7924
Summary: Ref T4222. This was used by Facebook while developing Releeph, but should no longer be necessary since Releeph is in the upstream. I can't get an answer out of Facebook about whether they still use it or not (see T4227), so nuke it. We're going to replace it with a more general mechanism (see T4222).
Test Plan: Regenerated celerity map. Browsed some pages, still got resources.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7863
Summary:
Ref T2015. Not directly related to Drydock, but I've wanted to do this for a bit.
Introduce a common base class for all the workflows in the scripts in `bin/*`. This slightly reduces code duplication by moving `isExecutable()` to the base, but also provides `getViewer()`. This is a little nicer than `PhabricatorUser::getOmnipotentUser()` and gives us a layer of indirection if we ever want to introduce more general viewer mechanisms in scripts.
Test Plan: Lint; ran some of the scripts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7838
Summary: We currently have a lot of calls to `addCrumb(id(new PhabricatorCrumbView())->...)` which can be expressed much more simply with a convenience method. Nearly all crumbs are only textual.
Test Plan:
- This was mostly automated, then I cleaned up a few unusual sites manually.
- Bunch of grep / randomly clicking around.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7787
Summary:
These just got copy/pasted like crazy, the base class has the correct default implementation.
(I'm adding "H" for Herald Rules, which is why I was in this code.)
I also documented the existing prefixes at [[ Object Name Prefixes ]].
Test Plan: Verified base implementation. Typed some object names into the jump nav.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7785
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
Fixes T3034. This is obsoleted by modern policies.
This was written by a Facebook intern and is rarely used -- the Hive install might be the only use in the wild. It has never really worked correctly.
Test Plan: `grep`; browsed Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3034
Differential Revision: https://secure.phabricator.com/D7568
Summary: I'm planning to add more detailed info to Diffusion itself, but catch the big issue here.
Test Plan: Hit config issue locally, then resolved it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7439
Summary: We've had support for this for a long time, but it was conditional on config. Since it more-or-less actually does something now, just enable it unconditionally.
Test Plan: Settings -> SSH Public Keys
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7426
Summary:
Gets rid of some old Differential-specific nonsense and replaces it with general runtime-pluggable Remarkup rules.
Facebook: This removes two options which may be in use. Have any classes being added via config here just subclass the new abstract bases instead. This should take 5 seconds to fix. You can adjust order by overriding `getPriority()` on the rules, if necessary.
Test Plan: See comments.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, andrewjcg, aran
Differential Revision: https://secure.phabricator.com/D7393
Summary:
While we mostly have reasonable effective object accessibility when you lock a user out of an application, it's primarily enforced at the controller level. Users can still, e.g., load the handles of objects they can't actually see. Instead, lock the queries to the applications so that you can, e.g., never load a revision if you don't have access to Differential.
This has several parts:
- For PolicyAware queries, provide an application class name method.
- If the query specifies a class name and the user doesn't have permission to use it, fail the entire query unconditionally.
- For handles, simplify query construction and count all the PHIDs as "restricted" so we get a UI full of "restricted" instead of "unknown" handles.
Test Plan:
- Added a unit test to verify I got all the class names right.
- Browsed around, logged in/out as a normal user with public policies on and off.
- Browsed around, logged in/out as a restricted user with public policies on and off. With restrictions, saw all traces of restricted apps removed or restricted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7367
Summary: Fixes T4001. I broke this some time ago and no one has complained. I don't think it gets much use, and we haven't added it for the newer apps. Just get rid of it rather than adapt the URIs for ApplicationSearch.
Test Plan: Unit tests, sent myself some email.
Reviewers: zeeg, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4001
Differential Revision: https://secure.phabricator.com/D7355
Summary:
Ref T603. This cleans up an existing callsite in the policy filter, and opens up some stuff in the future.
Some policy objects don't have real PHIDs:
PhabricatorTokenGiven
PhabricatorSavedQuery
PhabricatorNamedQuery
PhrequentUserTime
PhabricatorFlag
PhabricatorDaemonLog
PhabricatorConduitMethodCallLog
ConduitAPIMethod
PhabricatorChatLogEvent
PhabricatorChatLogChannel
Although it would be reasonable to add real PHIDs to some of these (like `ChatLogChannel`), it probably doesn't make much sense for others (`DaemonLog`, `MethodCallLog`). Just let them return `null`.
Also remove some duplicate `$id` and `$phid` properties. These are declared on `PhabricatorLiskDAO` and do not need to be redeclared.
Test Plan: Ran the `testEverythingImplemented` unit test, which verifies that all classes conform to the interface.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7306
Summary: This builds out and implements PHUIPropertyListView (container) and PHUIPropertyListItemView (section) as well as adding tabs.
Test Plan: Tested each page I edited with the exception of Releeph and Phortune, though those changes look ok to me diff wise. Updated examples page with tabs.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7283
Summary:
I'm just going to store application policy settings (like view/edit policy, and default policies for content) in config, because:
1) We'll need access to it on every page, and Config is "free" since we already pull it.
2) Building separate storage and transactions seems like overkill, we get less-nice but pretty-reasonable transactions for free with config.
3) We could easily move it later if this is a bad call.
Also fix some formatting.
Test Plan: See future revisions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7202
Summary:
Three changes here.
- Add `setActionList()`, and use that to set the action list.
- Add `setPropertyList()`, and use that to set the property list.
These will let us add some apropriate CSS so we can fix the border issue, and get rid of a bunch of goofy `.x + .y` selectors.
- Replace `addContent()` with `appendChild()`.
This is just a consistency thing; `AphrontView` already provides `appendChild()`, and `addContent()` did the same thing.
Test Plan:
- Viewed "All Config".
- Viewed a countdown.
- Viewed a revision (add comment, change list, table of contents, comment, local commits, open revisions affecting these files, update history).
- Viewed Diffusion (browse, change, history, repository, lint).
- Viewed Drydock (resource, lease).
- Viewed Files.
- Viewed Herald.
- Viewed Legalpad.
- Viewed macro (edit, edit audio, view).
- Viewed Maniphest.
- Viewed Applications.
- Viewed Paste.
- Viewed People.
- Viewed Phulux.
- Viewed Pholio.
- Viewed Phame (blog, post).
- Viewed Phortune (account, product).
- Viewed Ponder (questions, answers, comments).
- Viewed Releeph.
- Viewed Projects.
- Viewed Slowvote.
NOTE: Images in Files aren't on a black background anymore -- I assume that's on purpose?
NOTE: Some jankiness in Phortune, I'll clean that up when I get back to it. Not related to this diff.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7174
Summary: This adds the 'PHUIObjectBox' to nearly every place that should get it. I need to comb through Diffusion a little more. I've left Differential mostly alone, but may decide to do it anyways this weekend. I'm sure I missed something else, but these are easy enough to update.
Test Plan: tested each new layout.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7162
Summary: Ref T603. We have a real policy app now, so put the config options there. Revise the description of the public policy switch to make it clear that enabling it immediately opens up the user directory and various other interfaces.
Test Plan: Viewed/edited config setting.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7154
Summary:
Ref T603. Adds clarifying text which expands on policies and explains exceptions and rules. The goal is to provide an easy way for users to learn about special policy rules, like "task owners can always see a task".
This presentation might be a little aggressive. That's probably OK as we introduce policies, but something a little more tempered might be better down the road.
Test Plan: See screenshot.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7150
Summary: I'd like to reuse this for other content areas, renaming for now. This might be weird to keep setForm, but I can fix that later if we need.
Test Plan: reload a few forms in maniphest, projects, differential
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7120
Summary: Ref T3794. Drop auxiliary field, use standard field.
Test Plan: Performed migration, field seemed to survive it intact. Edited and viewed tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3794
Differential Revision: https://secure.phabricator.com/D7036
Summary: Fixes T3840. Depends on D7021. See task for discussion. Also improved some config/help stuff.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3840
Differential Revision: https://secure.phabricator.com/D7022
Summary: The adds the ability to set 'properties' such as state, privacy, due date to the header of objects.
Test Plan: Implemented in Paste, Pholio. Tested various states.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7016
Summary: Ref T418. Maniphest has an obsolete class-based field selector. Replace it with CustomField-based selectors, which use the nice config UI and are generally way easier to use.
Test Plan: Added custom fields; edited and viewed custom fields on tasks. Everything worked as expected.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D6998
Summary: This allows administrative overreach. Administrators can enable `javascript:` and then XSS things if this isn't locked.
Test Plan: Viewed value on web UI, verified it was locked.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6975
Summary:
Fixes T3807. Several issues:
- Currently, we split config of type `list<string>` on commas, which makes it impossible to enter a regex with a comma in it.
- Split on newlines only.
- Some of the examples are confusing (provided in JSON instead of the format you actually have to enter them).
- Show examples in the same format you should enter text.
- We didn't validate regexps.
- Introduce `list<regex>` to validate regexes.
@hlau: Note that the old config format for the bugtraq stuff implied the delimiters on the regular expression. They are no longer implied. The examples show the correct format.
Test Plan: Viewed and edited affected config, hitting error and success cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: hlau, aran
Maniphest Tasks: T3807
Differential Revision: https://secure.phabricator.com/D6969
Summary: Ref T603. Ref D6941.
Test Plan: Clicked around all over - looked good. I plan to re-test D6941 to make sure the executeOne case works now as intended
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6944
