Summary: Clean up the error view styling.
Test Plan:
Tested as many as I could find, built additional tests in UIExamples
{F280452}
{F280453}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11605
Summary: Ref T6881. This won't do much of interest on third party installs yet, but it's stable and we don't need to hold it back any longer.
Test Plan: Ran `phd start`, saw the trigger daemon start up.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11603
Summary: Select a similar or better FontAwesome icon to represent each application
Test Plan: Visual inspection
Reviewers: epriestley, btrahan
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11489
Summary:
Ref T6881. I tried to cheat here by not implementing this, but we need it for destroying triggers directly with `bin/remove destroy`, since that needs to load them by PHID.
So, cheat slightly less. Implement PolicyAware but not CursorPagedPolicyAware.
Test Plan:
- Used `bin/remove destroy` to destroy a trigger by PHID.
- Browsed daemon console.
- Ran trigger daemon.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11445
Summary:
Ref T6881. Hopefully, this is the hard part.
This adds a new daemon (the "trigger" daemon) which processes triggers, schedules them, and then executes them at the scheduled time. The design is a little complicated, but has these goals:
- High resistance to race conditions: only the application writes to the trigger table; only the daemon writes to the event table. We won't lose events if someone saves a meeting at the same time as we're sending a reminder out for it.
- Execution guarantees: scheduled events are guaranteed to execute exactly once.
- Support for arbitrarily large queues: the daemon will make progress even if there are millions of triggers in queue. The cost to update the queue is proportional to the number of changes in it; the cost to process the queue is proportional to the number of events to execute.
- Relatively good observability: you can monitor the state of the trigger queue reasonably well from the web UI.
- Modular Infrastructure: this is a very low-level construct that Calendar, Phortune, etc., should be able to build on top of.
It doesn't have this stuff yet:
- Not very robust to bad actions: a misbehaving trigger can stop the queue fairly easily. This is OK for now since we aren't planning to make it part of any other applications for a while. We do still get execute-exaclty-once, but it might not happen for a long time (until someone goes and fixes the queue), when we could theoretically continue executing other events.
- Doesn't start automatically: normal users don't need to run this thing yet so I'm not starting it by default.
- Not super well tested: I've vetted the basics but haven't run real workloads through this yet.
- No sophisticated tooling: I added some basic stuff but it's missing some pieces we'll have to build sooner or later, e.g. `bin/trigger cancel` or whatever.
- Intentionally not realtime: This design puts execution guarantees far above realtime concerns, and will not give you precise event execution at 1-second resolution. I think this is the correct goal to pursue architecturally, and certainly correct for subscriptions and meeting reminders. Events which execute after they have become irrelevant can simply decline to do anything (like a meeting reminder which executes after the meeting is over).
In general, the expectation for applications is:
- When creating an object (like a calendar event) that needs to trigger a scheduled action, write a trigger (and save the PHID if you plan to update it later).
- The daemon will process the event and schedule the action efficiently, in a race-free way.
- If you want to move the action, update the trigger and the daemon will take care of it.
- Your action will eventually dump a task into the task queue, and the task daemons will actually perform it.
Test Plan:
Using a test script like this:
```
<?php
require_once 'scripts/__init_script__.php';
$trigger = id(new PhabricatorWorkerTrigger())
->setAction(
new PhabricatorLogTriggerAction(
array(
'message' => 'test',
)))
->setClock(
new PhabricatorMetronomicTriggerClock(
array(
'period' => 33,
)))
->save();
var_dump($trigger);
```
...I queued triggers and ran the daemon:
- Verified triggers fire;
- verified triggers reschedule;
- verified trigger events show up in the web UI;
- tried different periods;
- added some triggers while the daemon was running;
- examined `phd debug` output for anything suspicious.
It seems to work in trivial use case, at least.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11419
Summary: Ref T6822.
Test Plan: `grep`. This method is only called from within `PhutilArgumentWorkflow::__construct`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11415
Summary: Ref T5402.
Test Plan:
- Queried archived tasks.
- Grepped for use sites and verified no other callsites are order-sensitive.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5402
Differential Revision: https://secure.phabricator.com/D11089
Summary: Ref T5402, T6238. Pull this out into a class so the Instances app can embed task views.
Test Plan: Loaded `/daemon/` and examined the content in the tables.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6238, T5402
Differential Revision: https://secure.phabricator.com/D11090
Summary: Ref T5402. This cleans up some code and sets us up to use this sort of data more easily later.
Test Plan: viewed the daemon console from the web and the log of a specific archived daemon. both looked good. for other callsites looked really, really carefully.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5402
Differential Revision: https://secure.phabricator.com/D11042
Summary: See rP2fedb6f941d8. We might need a more general version of this since we do some `sudo` stuff elsewhere, but at least on my machine `sudo -n` exits with code 0 when the target user exists but needs a password.
Test Plan:
- Tried to run daemons as root, with no automatic sudo to root. Got a bad result before (phd believed it had executed the daemons) and a good result afterward (phd recognized that sudo failed).
- Tried to run daemons from root, as a non-root user. Got a good result in both cases.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: fabe, epriestley
Differential Revision: https://secure.phabricator.com/D11041
Summary:
Fixes T5196
If no phd.user is configured the behaviour is unchanged besides printing a warning when run as root (Usually i would add an exit(1) here but that would break existing installs who do that).
If phd.user is set and the current user is root it will run the daemon as: su USER -c "command" (I'm not sure if this works for every platform needed)
Otherwise it will refuse to start if configured and current user mismatch.
Test Plan: Stopped & Started phd daemon with various users and different phd.user settings including root
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: vinzent, epriestley
Maniphest Tasks: T5196
Differential Revision: https://secure.phabricator.com/D11036
Summary:
Fixes T6702. Ref T3554. Currently, tasks can be cancelled, retried and freed from the web UI by any logged in user.
This isn't appreciably dangerous (I can't come up with a way that a user could do anything security-affecting), but I think I probably intended this to be admin-only, but these actions should move to the CLI anyway.
Move them to the CLI. Lay some groundwork for some future `bin/worker cancel --class SomeTaskClass`, but don't implement that yet.
Test Plan: Used `cancel`, `retry` and `free` from the CLI. Hit all the error/success states.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3554, T6702
Differential Revision: https://secure.phabricator.com/D10939
Summary:
Fixes an issue with T5336 / D9871. We did 99% of the work here but didn't actually turn on the priority sorting. The unit test passed by default, which didn't catch this.
- Fix the unit test (it failed).
- Fix the query (test now passes).
- Add a "Next in Queue" element to the UI to make this kind of thing easier to spot/understand.
Test Plan: Ran unit test. Viewed "Next in Queue". Queued some tasks, flushed the queue. Web UI tracked the state sensibly.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: cburroughs, epriestley
Differential Revision: https://secure.phabricator.com/D10766
Summary:
Ref T1191. Now that the whole database is covered, we don't need to do as much work to build expected schemata. Doing them database-by-database was helpful in converting, but is just reudndant work now.
Instead of requiring every application to build its Lisk objects, just build all Lisk objects.
I removed `harbormaster.lisk_counter` because it is unused.
It would be nice to autogenerate edge schemata, too, but that's a little trickier.
Test Plan: Database setup issues are all green.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10620
Summary:
Ref T1191.
- Adds definitions for missing keys and keys with wrong uniqueness. Generally, I defined these before fixing the key query to actually pull all keys and support uniqueness.
- Moves "key uniqueness" to note severity; this is fixable (probably?) and there are no remaining issues.
- Moves "Missing Key" to note severity; missing keys are fixable and all remaining missing keys are really missing (either missing edge keys, or missing PHID keys):
{F210089}
- Moves "Surplus Key" to note seveirty; surplus keys are fixable all remaining surplus keys are really surplus (duplicate key in Harbormaster, key on unused column in Worker):
{F210090}
Test Plan:
- Vetted missing/surplus/unique messages.
- 146 issues remaining.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10590
Summary: Ref T1191. Fills in some more of the databases. Nothing very notable here. I didn't encounter any issues or overlong keys.
Test Plan: Used web UI to click around and verify expected schemata match up against actual schemata well.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10516
Summary:
Ref T2374. Fixes T5988.
Keep track of what's been killed and not been killed, and surface that maybe you need sudo if things don't get killed with --force
...also basically make this force thing work. I managed to convinced myself stuff was getting killed with --force when it mostly wasn't. Make sure the --force parameter gets pushed as low as it needs to go to have things get killed.
Test Plan:
- `sudo ./bin/phd restart`
- `rm -rf /var/tmp/phd/pid/*`
- `./bin/phd stop` --> get warning about rogue daemons
- `./bin/phd stop X` --> get warning about no running daemons
- `./bin/phd stop --force` --> get warning about not being able to kill daemons
- `sudo ./bin/phd stop --force` --> kill daemons successfully
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T2374, T5988
Differential Revision: https://secure.phabricator.com/D10386
Summary:
Ref T5405.
- `--limit` wasn't actually used anywhere.
- Make it mean "the N newest lines".
Test Plan: Ran `bin/phd log`, `bin/phd log --limit 3`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5405
Differential Revision: https://secure.phabricator.com/D10385
Summary: Ref T2374. While building D10367 I noticed that phd was finding rogue daemons way more than it should be. Re-jigger this code path so rogue daemons are checked for *after* we've dealt with known daemons. This keeps the logic pretty simple overall.
Test Plan: phd start; kill pid files; phd stop and get the right warning; phd stop --force and it kills the rogue demons. phd stop in normal conditions no longer reporting rogue daemons erroneously
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T2374
Differential Revision: https://secure.phabricator.com/D10368
Summary: Shows the UI everywhere. Also asort() the keys before calculating the environment hash as that is probably an issue for someone at some point we just don't need to have. Ref T5968.
Test Plan: Viewed the setup check and saw a link to the daemon console. Viewed the daemon console and saw the various stale config daemons. Clicked a daemon and saw a "stale config" header icon where expected. Restarted daemons and all of this went away.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5968
Differential Revision: https://secure.phabricator.com/D10367
Summary: Fixes T4881.
Test Plan: made a config change, saw the issue, restarted daemons and it went away
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4881
Differential Revision: https://secure.phabricator.com/D10339
Summary:
If daemon data is mangled, `bin/phd restart` will SIGINT process `0`, which kills it.
uh oh T.T so sad
Test Plan: Used `bin/phd start` to start daemons; removed PID information from one; saw `bin/phd stop` shut down cleanly and not kill itself.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: mholden, epriestley
Differential Revision: https://secure.phabricator.com/D10308
Summary:
Fixes T5855. Adds a `--graceful N` flag to `phd stop` and `phd restart`.
`phd` will send SIGINT, wait `N` seconds, SIGTERM, wait 15 seconds, and SIGKILL. By default, `N` is 15.
Test Plan:
- Ran `bin/phd debug ...` and used `^C` to interrupt daemons. Saw graceful shutdown behavior, and abrupt termination on multiple `^C`.
- Ran `bin/phd start`, `bin/phd stop` and `bin/phd restart` with `--graceful` set to various things, notably `0`. Saw graceful shutdowns on the CLI and in the web UI. With `0`, abrupt shutdowns.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
Subscribers: epriestley
Maniphest Tasks: T5855
Differential Revision: https://secure.phabricator.com/D10228
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: These have been moved into libphutil.
Test Plan: Browsed Phabricator, didn't see a crash.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9907
Summary: Fixes T5336. Currently, `PhabricatorWorkerLeaseQuery` is basically FIFO. It makes more sense for the queue to be a priority-queue, and to assign higher priorities to alerts (email and SMS).
Test Plan: Created dummy tasks in the queue (with different priorities). Verified that the priority field was set correctly in the DB and that the priority was shown on the `/daemon/` page. Started a `PhabricatorTaskmasterDaemon` and verified that the higher priority tasks were executed before lower priority tasks.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5336
Differential Revision: https://secure.phabricator.com/D9871
Summary: The rest of this code works if we hand off `array()`, and fataling here, while more correct, is harder for users to get out of (they have to go manually remove files) and not obvious.
Test Plan: Corrupted pid file and ran `phd stop`.
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9749
Summary:
Ref T5446.
- For all callsites which do not specify a value, set `false` explicitly.
- Make `true` the default.
Test Plan: Used `grep`, then manually went through everything.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5446
Differential Revision: https://secure.phabricator.com/D9687
Summary: It is sometimes useful to use `./bin/phd status` as a means to determine if daemons //are// actually running on the current host. For example, a common practice in upstart scripts is something similar to `./bin/phd status || ./bin/phd status`.
Test Plan:
```
> ./bin/phd status
ID Host PID Started Daemon Arguments
1162 ip-10-127-58-93 4046 Jun 20 2014, 3:17:43 AM PhabricatorFactDaemon
1161 ip-10-127-58-93 3984 Jun 20 2014, 3:17:43 AM PhabricatorTaskmasterDaemon
1160 ip-10-127-58-93 3973 Jun 20 2014, 3:17:42 AM PhabricatorTaskmasterDaemon
1159 ip-10-127-58-93 3968 Jun 20 2014, 3:17:42 AM PhabricatorTaskmasterDaemon
1158 ip-10-127-58-93 3943 Jun 20 2014, 3:17:42 AM PhabricatorTaskmasterDaemon
1157 ip-10-127-58-93 3914 Jun 20 2014, 3:17:41 AM PhabricatorGarbageCollectorDaemon
1156 ip-10-127-58-93 3909 Jun 20 2014, 3:17:41 AM PhabricatorRepositoryPullLocalDaemon
> ./bin/phd status --local
There are no running Phabricator daemons.
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9645
Summary:
Ref T4209. Unifies the local (`./bin/phd status`) and global (`./bin/phd status --all`) view into a single table. This generally makes it easy to administer daemons running across multiple hosts.
Depends on D9606.
Test Plan:
```
> sudo ./bin/phd status
ID Host PID Started Daemon Arguments
38 localhost 2282 Jun 18 2014, 7:52:56 AM PhabricatorRepositoryPullLocalDaemon
39 localhost 2289 Jun 18 2014, 7:52:57 AM PhabricatorGarbageCollectorDaemon
40 localhost 2294 Jun 18 2014, 7:52:57 AM PhabricatorTaskmasterDaemon
41 localhost 2314 Jun 18 2014, 7:52:58 AM PhabricatorTaskmasterDaemon
42 localhost 2319 Jun 18 2014, 7:52:59 AM PhabricatorTaskmasterDaemon
43 localhost 2328 Jun 18 2014, 7:53:00 AM PhabricatorTaskmasterDaemon
44 localhost 2354 Jun 18 2014, 7:53:08 AM PhabricatorRepositoryPullLocalDaemon X --not Y
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D9607
Summary: Fixes T5400. Couple of these were missed.
Test Plan: Forced daemons into all statuses, viewed icons.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5400
Differential Revision: https://secure.phabricator.com/D9612
Summary:
We already have GC for daemon log events, but not for daemon logs themselves.
Collect old daemon logs which aren't still running.
Test Plan: Ran `phd debug garbage`, observed old logs get cleaned up. Started some daemons, re-ran garbage, made sure they stuck around.
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9610
Summary: Add a method to `PhabricatorDaemonLogQuery` to exclude IDs from the results.
Test Plan: Thought long and hard.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9606
Summary: This was previously submitted as D9497, but I had accidentally `arc land`ed some not-reviewed not-yet-complete changes in addition to the accepted diff.
Test Plan: Same as D9497.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5388, T4209
Differential Revision: https://secure.phabricator.com/D9589
Summary: Ref T4209. Currently, `./bin/phd status` prints a table showing the daemons that are executing on the current host. It would be useful to be able to conventiently query the daemons running across all hosts. This would also (theoretically) make it possible to conditionally start daemons on a host depending upon the current state and on the daemons running on other hosts.
Test Plan:
```
> ./bin/phd status --all
ID Host PID Started Daemon Arguments
18 phabricator 6969 Jun 12 2014, 4:44:22 PM PhabricatorTaskmasterDaemon
17 phabricator 6961 Jun 12 2014, 4:44:19 PM PhabricatorTaskmasterDaemon
16 phabricator 6955 Jun 12 2014, 4:44:15 PM PhabricatorTaskmasterDaemon
15 phabricator 6950 Jun 12 2014, 4:44:14 PM PhabricatorTaskmasterDaemon
14 phabricator 6936 Jun 12 2014, 4:44:13 PM PhabricatorGarbageCollectorDaemon
13 phabricator 6931 Jun 12 2014, 4:44:12 PM PhabricatorRepositoryPullLocalDaemon
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D9497
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: This went smoother than expeced. Makes the rounded Card the default, also tweaked selected state a little.
Test Plan:
Test UIExamples, Maniphest, Home, Differential, Harbormaster, Audit. Everything seems normal
{F163971}
{F163973}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9408
Summary:
This probably needs some tweaks, but the idea is to make it easier to browse and access applications without necessarily needing them to be on the homepage.
Open to feedback.
Test Plan:
(This screenshot merges "Organization", "Communication" and "Core" into a single "Core" group. We can't actually do this yet because it wrecks the homepage.)
{F160052}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5176
Differential Revision: https://secure.phabricator.com/D9297
Summary:
Fixes T5154. Currently, "phd stop" terminates daemons relatively abruptly (and other things do too, like killing them). This can leave them with long leases that won't expire any time soon. Normally this isn't a big deal, since it just means an email or an import takes a bit longer (often 2 hours, but up to 24 hours) to run. However:
- We've increased default lease durations a lot fairly recently -- the 2 hours used to be 15 minutes.
- Harbormaster and Drydock add new types of tasks which are more dependent on other tasks, so waiting 2 hours for something to free up can hold up more stuff in queue.
When `phd start` is run, we can be confident (at least, in normal circumstances) that leases are safe to free, since we do a check. This undoes any damage done by abrupt stops in "phd stop" or by users or systems killing stuff.
(It would be nice to make "phd stop" more graceful at some point, but we always have to deal with abrupt termination in some cases no matter how gentle "phd stop" is.)
One sort-of-questionable thing here is that we don't distinguish between tasks which had an active lease and tasks which had been released, since the system itself does not make a distiction. So, for example, if you have a task that retries 5 times and waits an hour between retries, you'll get a retry on every `phd start` now, and could exhaust them all in a few minutes if you cycle `phd start` aggressively. I think this is OK. In the future, we could try to distinguish between these types of tasks, and only free the ones with active leases.
Test Plan:
- Used `phd start` normally, saw it free leases.
- Used `phd start`, killed it real quick so no taskmasters spawned, ran it again an saw no leases freed.
- Used `phd start --keep-leases`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5154
Differential Revision: https://secure.phabricator.com/D9256
Summary: Fixes T4735. When running `./bin/phd`, show daemon arguments.
Test Plan:
```
./bin/phd status
PID Started Daemon Arguments
12711 May 20 2014, 9:02:52 AM PhabricatorRepositoryPullLocalDaemon []
12716 May 20 2014, 9:02:52 AM PhabricatorGarbageCollectorDaemon []
12733 May 20 2014, 9:02:53 AM PhabricatorTaskmasterDaemon []
12768 May 20 2014, 9:02:53 AM PhabricatorTaskmasterDaemon []
12775 May 20 2014, 9:02:53 AM PhabricatorTaskmasterDaemon []
12780 May 20 2014, 9:02:54 AM PhabricatorTaskmasterDaemon []
12838 May 20 2014, 9:02:54 AM PhabricatorFactDaemon []
13436 May 20 2014, 9:03:23 AM PhabricatorRepositoryPullLocalDaemon ["X","--not","Y"]
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T4735
Differential Revision: https://secure.phabricator.com/D9208
