Summary: Revisions with blocking reviewers had this stamp built incorrectly, which cascaded into trying to use `array()` as a PHID. Recover so these tasks succeed.
Test Plan: Will deploy production.
Differential Revision: https://secure.phabricator.com/D19082
Summary: Ref T13053. See PHI126. Add an explicit "Mute" action to kill mail and notifications for a particular object.
Test Plan: Muted and umuted an object while interacting with it. Saw mail route appropriately.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19033
Summary: Fixes T10189. Ref T13053. We haven't sent these headers in a very long time. Briefly mention the new stamps header instead, although I expect to integrate stamp documentation into the UI in a more cohesive way in the future.
Test Plan: Read documentation.
Maniphest Tasks: T13053, T10189
Differential Revision: https://secure.phabricator.com/D19030
Summary: Ref T13053. Some mail (like push notification mail) doesn't currently generate any stamps. Drop this section if there aren't any stamps on the mail.
Test Plan: Will check push mail in production.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19028
Summary: Ref T13053. Uses the changes in D19026 to escape mail addresses. Those rules may not be right yet, but they're at least all in one place, have test coverage, and aren't obviously incorrect.
Test Plan: Will vet this more extensively when re-testing all mailers.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19027
Summary:
Ref T13053. Postmark support recommends testing requests against a whitelist of known remote addresses to determine request authenticity. Today, the list can be found here:
<https://postmarkapp.com/support/article/800-ips-for-firewalls>
This is potentially less robust than, e.g., HMAC verification, since they may need to add new datacenters or support IPv6 or something. Users might also have weird network topologies where everything is proxied, and this makes testing/simulating more difficult.
Allow users to configure the list so that they don't need to hack things apart if Postmark adds a new datacenter or remote addresses are unreliable for some other reason, but ship with safe defaults for today.
Test Plan:
Tried to make local requests, got kicked out. Added `0.0.0.0/0` to the list, stopped getting kicked out.
I don't have a convenient way to route real Postmark traffic to my development laptop with an authentic remote address so I haven't verified that the published remote address is legitimate, but I'll vet that in production when I go through all the other mailers.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19025
Summary:
Depends on D19019. Ref T13053. Fixes T12689. See PHI178.
Currently, if `@alice` resigns from a revision but `#alice-fan-club` is still a subscriber or reviewer, she'll continue to get mail. This is undesirable.
When users are associated with an object but have explicitly disengaged in an individal role (currently, only resign in audit/differential) mark them "unexpandable", so that they can no longer be included through implicit membership in a group (a project or package).
`@alice` can still get mail if she's a explicit recipient: as an author, owner, or if she adds herself back as a subscriber.
Test Plan:
- Added `@ducker` and `#users-named-ducker` as reviewers. Ducker got mail.
- Resigned as ducker, stopped getting future mail.
- Subscribed explicitly, got mail again.
- (Plus some `var_dump()` sanity checking in the internals.)
Reviewers: amckinley
Maniphest Tasks: T13053, T12689
Differential Revision: https://secure.phabricator.com/D19021
Summary:
Depends on D19017. Fixes T12491. Ref T13053. After SES threw us in the dungeon for sending mail to a spamtrap we changed outbound mail rules to stop sending to unverified addresses, except a small amount of registration mail which we can't avoid.
However, we'll still reply to random inbound messages with a helpful error, even if the sender is unverified.
Instead, only send exception mail back if we know who the sender is.
Test Plan: Processed inbound mail with `scripts/mail/mail_handler.php`. No more outbound mail for "bad address", etc. Still got outbound mail for "unknown command !quack".
Reviewers: amckinley
Maniphest Tasks: T13053, T12491
Differential Revision: https://secure.phabricator.com/D19018
Summary: Depends on D19016. Ref T13053. Adds a listener for the Postmark webhook.
Test Plan:
Processed some test mail locally, at least:
{F5416053}
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19017
Summary:
Depends on D19015. Ref T13053. Currently, we don't link up hyperlinks in the body of mail viewed in the web UI. We should, but this is a little tricky (see T13053#235074).
As a general improvement to make working with "Must Encrypt" mail less painful, add a big button to jump to the related object.
Test Plan: {F5415990}
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19016
Summary: Depends on D19014. Ref T13053.
Test Plan: Used `./bin/mail show-outbound --id <id> --dump-html > out.html && open out.html` to look at HTML mail, saw smaller, lighter stamp text with better spacing.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19015
Summary:
Depends on D19009. Ref T13053. For "Must Encrypt" mail, we must currently strip the "Thread-Topic" header because it sometimes contains sensitive information about the object.
I don't actually know if this header is useful or anyting uses it. My understanding is that it's an Outlook/Exchange thing, but we also implement "Thread-Index" which I think is what Outlook/Exchange actually look at. This header may have done something before we implemented "Thread-Index", or maybe never done anything. Or maybe older versions of Excel/Outlook did something with it and newer versions don't, or do less. So it's possible that an even better fix here would be to simply remove this, but I wasn't able to convince myself of that after Googling for 10 minutes and I don't think it's worth hours of installing Exchange/Outlook to figure out. Instead, I'm just trying to simplify our handling of this header for now, and maybe some day we'll learn more about Exchange/Outlook and can remove it.
In a number of cases we already use the object monogram or PHID as a "Thread-Topic" without users ever complaining, so I think that if this header is useful it probably isn't shown to users, or isn't shown very often (e.g., only in a specific "conversation" sub-view?). Just use the object PHID (which should be unique and stable) as a thread-topic, everywhere, automatically.
Then allow this header through for "Must Encrypt" mail.
Test Plan: Processed some local mail, saw object PHIDs for "Thread-Topic" headers.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19012
Summary: Depends on D19007. Ref T12677.
Test Plan: Used `bin/mail send-test ... --mailer postmark` to deliver some mail via Postmark.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12677
Differential Revision: https://secure.phabricator.com/D19009
Summary: Depends on D19006. Ref T13053. Ref T12677. When multiple mailers are configured but one or more fail, test that we recover (or don't) appropriately.
Test Plan: Ran unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19007
Summary: Depends on D19005. Ref T12677. Ref T13053. Tests that turning `cluster.mailers` into an actual list of mailers more or less works as expected.
Test Plan: Ran unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19006
Summary:
Depends on D19004. Ref T13053. Ref T12677. If the new `cluster.mailers` is configured, make use of it. Also use it in the Sengrid/Mailgun inbound stuff.
Also fix a bug where "Must Encrypt" mail to no recipients could fatal because no `$mail` was returned.
Test Plan: Processed some mail locally. The testing on this is still pretty flimsy, but I plan to solidify it in an upcoming change.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19005
Summary:
Depends on D19002. Ref T13053. Ref T12677. Adds a new option to allow configuration of multiple mailers.
Nothing actually uses this yet.
Test Plan: Tried to set it to various bad values, got reasonable error messages. Read documentation.
Reviewers: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19003
Summary:
Depends on D19000. Ref T13053. Ref T12677. Currently, most mailers are configured with a bunch of `<mailer>.setting-name` global config options.
This means that you can't configure two different SMTP servers, which is a reasonable thing to want to do in the brave new world of mail failover.
It also means you can't configure two Mailgun accounts or two SES accounts. Although this might seem a little silly, we've had more service disruptions because of policy issues / administrative error (where a particular account was disabled) than actual downtime, so maybe it's not completely ridiculous.
Realign mailers so they can take configuration directly in an explicit way. A later change will add new configuration to take advantage of this and let us move away from having ~10 global options for this stuff eventually.
(This also makes writing third-party mailers easier.)
Test Plan:
Processed some mail, ran existing unit tests. But I wasn't especially thorough.
I expect later changes to provide some tools to make this more testable, so I'll vet each provider more thoroughly and add coverage for multiple mailers after that stuff is ready.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19002
Summary:
Depends on D18998. Ref T13053. When we send "Must Encrypt" mail, we currently send it with a normal "From" address.
This discloses a little information about the object (for example, if the Director of Silly Walks is interacting with a "must encrypt" object, the vulnerability is probably related to Silly Walks), so anonymize who is interacting with the object.
Test Plan: Processed some mail. (The actual final "From" is ephemeral and a little tricky to examine and I didn't actually transmit mail over the network, but it should be obvious if this works or not on `secure`.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19000
Summary:
Ref T13053. Ref T12677. This restructures the calls and error handling logic so that we can pass in a list of multiple mailers and get retry logic.
This doesn't actually ever use multiple mailers yet, and shouldn't change any behavior. I'll add multiple-mailer coverage a little further in, since there's currently no way to effectively test which of several mailers ended up transmitting a message.
Test Plan:
- This has test coverage; tests still pass.
- Poked around locally doing things that send mail, saw mail appear to send. I'm not attached to a real mailer though so my confidence in local testing is only so-so.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D18998
Summary:
Ref T13053. Adds revision stamps (status, reviewers, etc). Adds Herald rule stamps, like the existing X-Herald-Rules header.
Removes the "self" stamps, since you can just write a rule against `whatever(@epriestley)` equivalently. If there's routing logic around this, it can live in the routing layer. This avoids tons of self-actor, self-mention, self-reviewer, self-blocking-reviewer, self-resigned-reviewer, etc., stamps.
Use `natcasesort()` instead of `sort()` so that numeric values (like monograms) sort `9, 80, 700` instead of `700, 80, 9`.
Remove the commas from rendering since they don't really add anything.
Test Plan: Edited tasks and revisions, looked at mail stamps, saw stamps that looked pretty reasonable (with no more self stuff, no more commas, sorting numbers, and Herald stamps).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18997
Summary: Ref T13053. Adds more mail tags with information available on the Editor object.
Test Plan: Banged around in Maniphest, viewed the resulting mail, all the stamps seemed to align with reality.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18995
Summary:
Ref T13053. Because I previously misunderstood what "multiplex" means, I used it in various contradictory and inconsistent ways.
We can send mail in two ways: either one mail to everyone with a big "To" and a big "Cc" (not default; better for mailing lists) or one mail to each recipient with just them in "To" (default; better for almost everything else).
"Multiplexing" is combining multiple signals over a single channel, so it more accurately describes the big to/cc. However, it is sometimes used to descibe the other approach. Since it's ambiguous and I've tainted it through misuse, get rid of it and use more clear language.
(There's still some likely misuse in the SMS stuff, and a couple of legitimate uses in other contexts.)
Test Plan: Grepped for `multiplex`, saw less of it.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18994
Summary:
Ref T10448. Currently, we use "mail tags" (in {nav Settings > Email Preferences}) to give users some ability to route mail. There are a number of major issues with this:
- It isn't modular and can't be extended by third-party applications.
- The UI is a giant mess of 5,000 individual settings.
- Settings don't map clearly to actual edits.
- A lot of stuff isn't covered by any setting.
This adds a new system, called "mail stamps", which is similar to "mail tags" but tries to fix all these problems.
I called these "stamps" because: stamps make sense with mail; we can't throw away the old system just yet and need to keep it around for a bit; we don't use this term for anything else; it avoids confusion with project tags.
(Conceptually, imagine these as ink stamps like "RETURN TO SENDER" or "FRAGILE", not actual postage stamps.)
The only real "trick" here is that later versions of this will need to enumerate possible stamps for an object and maybe all possible stamps for all objects in the system. This is why stamp generation is separated into a "template" phase and a "value" phase. In future changes, the "template" phase can be used on its own to generate documentation and typeaheads and let users build rules. This may need some more refinement before it really works since I haven't built any of that yet.
Also adds a preference for getting stamps in the header only (default) or header and body (better for Gmail, which can't route based on headers).
Test Plan:
Fiddled with preference, sent some mail and saw a "STAMPS" setting in the body and an "X-Phabricator-Stamps" header.
{F5411694}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10448
Differential Revision: https://secure.phabricator.com/D18991
Summary:
Depends on D18985. Ref T13053. See PHI125. Currently, mail attachments are just encoded onto the actual objects in the `MetaMTAMail` table.
This fails if attachments can't be encoded in JSON -- e.g., they aren't UTF8. This happens most often when revisions or commits attach patches to mail and those patches contain source code changes for files that are not encoded in UTF8.
Instead, save attachments in (and load attachments from) Files.
Test Plan: Enabled patches for mail, created a revision, saw it attach a patch. Viewed mail in web UI, saw link to download patch. Followed link, saw sensible file. Checked database, saw a `filePHID`. Destroyed mail with `bin/remove destroy`, saw attached files also destroyed.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18986
Summary:
Depends on D18984. Ref T13053. See D13408 for the original change and why this doesn't use DestructionEngine right now. The quick version is:
- It causes us to write a destruction log, which is slightly silly (we're deleting one thing and creating another).
- It's a little bit slower than not using DestructionEngine.
However, it gets us some stuff for free that's likely relevant now (e.g., Herald Transcript cleanup) and I'm planning to move attachments to Files, but want to be able to delete them when mail is destroyed.
The destruction log is a touch silly, but those records are very small and that log gets GC'd later without generating new logs. We could silence the log from the GC if it's ever an issue.
Test Plan: Used `bin/remove destroy` and `bin/garbage collect --collector mail.sent` to destroy mail and collect garbage.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18985
Summary: Depends on D18983. Ref T13053. Adds a new Herald action to activate the "must encrypt" flag and drop mail content.
Test Plan:
- Created a new Herald rule:
{F5407075}
- Created a "dog task" (woof woof, unsecure) and a "duck task" (quack quack, secure).
- Viewed mail for both in `bin/mail` and web UI, saw appropriate security/encryption behavior.
- Viewed "Must Encrypt" in "Headers" tab for the duck mail, saw why the mail was encrypted (link to Herald rule).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18984
Summary:
Ref T13053. See PHI291. For particularly sensitive objects (like security issues), installs may reasonably wish to prevent details from being sent in plaintext over email.
This adds a "Must Encrypt" mail behavior, which discards mail content and all identifying details, replacing it with a link to the `/mail/` application. Users can follow the link to view the message over HTTPS.
The flag discards body content, attachments, and headers which imply things about the content of the object. It retains threading headers and headers which may uniquely identify the object as long as they don't disclose anyting about the content.
The `bin/mail list-outbound` command now flags these messages with a `#` mark.
The `bin/mail show-outbound` command now shows sent/suppressed headers and the body content as delivered (if it differs from the original body content).
The `/mail/` web UI now shows a tag for messages marked with this flag.
For now, there is no way to actually set this flag on mail.
Test Plan:
- Forced this flag on, made comments and took actions to send mail.
- Reviewed mail with `bin/mail` and `/mail/` in the web UI, saw all content information omitted.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18983
Summary:
Depends on D18924. Ref T13048. Each adapter defines which repetition options ("every time", "only the first time") users may select for rules.
Currently, this is all explicit and hard-coded. However, every adapter really just implements this rule (except for some bugs, see below):
> You can pick "only the first time" if this adapter fires more than once on the same object.
Since we already have a `isSingleEventAdapter()` method which lets us tell if an adapter fires more than once, just write this rule in the base class and delete all the copy/pasting.
This also fixes two bugs because of the copy/pasting: Pholio Mocks and Phriction Documents did not allow you to write "only the first time" rules. There's no reason for this, they just didn't copy/paste enough methods when they were implemented.
This will make a future diff (which introduces an "if the rule did not match last time" policy) cleaner.
Test Plan:
- Checked several different types of rules, saw appropriate options in the dropdown (pre-commit: no options; tasks: first or every).
- Checked mocks and wiki docs, saw that you can now write "only the first time" rules.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18925
Summary:
Ref T2543. Fixes T10109.
Currently, Herald only runs in Differential when a change updates the diff. This is partly for historical reasons, and partly because we don't want to restart builds every time someone makes a comment. However, this behavior is inconsistent with other applications (which always trigger on any change), and occasionally confusing to users (in T10109, for example) or otherwise undesirable.
A similar issue is that T2543 has introduced a "Draft" state, where revisions don't send normal mail until builds finish. This interacts poorly with "Send me an email" rules (which shouldn't do anything here) and particularly with "Send me an email + only run these actions the first time the rule matches", since that might have an effect like "do nothing when the revision is created, then never anything again since you already did nothing once".
To navigate both of these issues, let objects tell Herald that certain actions (like mail or builds) are currently forbidden. If a rule uses a field or action which is currently forbidden, the whole rule automatically fails before it executes, but doesn't count toward "only the first time" as far as Herald's tracking of rule execution is concerned.
Then, forbid mail for draft revisions, and forbid builds for revisions which didn't just get updated. Forbidding mail fixes the issues with "Send me an email" that were created by the introduction of the draft state.
Finally, make Herald run on every revision update, not just substantive updates to the diff. This resolves T10109.
Test Plan:
Created revisions via the draft -> submit workflow, saw different transcripts. Here's a mail action being forbidden for a draft:
{F5237324}
Here's a build action being forbidden for a "mundane" update:
{F5237326}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T10109, T2543
Differential Revision: https://secure.phabricator.com/D18731
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary:
Fixes T12844. This code is misleading: the daemon insert is happening on a different connection, and is not inside the transaction on the Mail connection.
What actually happens is this:
- (Connection A) `BEGIN`
- (Connection A) `INSERT INTO mail ...`
- (Connection B) `INSERT INTO worker ...` <-- This is a different connection, and it is NOT in a transaction!
- There's a race window here: the worker row is globally visible but the mail row is still isolated inside the transaction.
- (Connection A) `COMMIT`
- Now we're clear: the mail row is globally visible.
Change this code to reflect what's actually happening.
This means that if the worker row insert fails for some reason, we'll now throw with a mail row written to the database. But this is fine: it doesn't send on its own (so it can't cause mail loops or anything) and it can be re-queued with `bin/mail resend` if necessary without too much trouble.
Test Plan: See T12844 for particulars. Made some comments on tasks, saw the daemons send mail.
Reviewers: chad, amckinley, jmeador
Reviewed By: jmeador
Maniphest Tasks: T12844
Differential Revision: https://secure.phabricator.com/D18124
Summary:
Fixes T12803. An install is having difficulty diagnosing mail failures, and one component is that permanent task failures aren't reaching the log.
It's reasonable to send these to the log even when "phd.verbose" is off. See T12803 for a rough review of when we generate these failrues today.
Test Plan:
- Faked some exceptions.
- Got a result in the log (P2058) with `phd.verbose` turned off.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12803
Differential Revision: https://secure.phabricator.com/D18106
Summary: Try to dis-ambiguate various button types and colors. Moves `simple` to `phui-button-simple` and moves colors to `button-color`.
Test Plan: Grep for buttons still inline, UIExamples, PHUIX, Herald, and Email Preferences.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18077
Summary:
We are submitting `epriestley (Evan Priestley) <noreply@meta.phacility.com>`, but should be submitting `"epriestley (Evan Priestley)" <noreply@meta.phacility.com>`.
Add the missing quotes.
Test Plan: Locally, this makes the API calls work against the Mailgun sandbox domain.
Reviewers: chad, amckinley
Reviewed By: chad, amckinley
Differential Revision: https://secure.phabricator.com/D17831
Summary: Fixes T12579. Unclear why the user ran this command.
Test Plan: Ran with `--id cat`. Ran with `--id 123`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12579
Differential Revision: https://secure.phabricator.com/D17719
Summary: Ref T12509. This encourages code to move away from HMAC+SHA1 by making the method name more obviously undesirable.
Test Plan: `grep`, browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12509
Differential Revision: https://secure.phabricator.com/D17632
Summary: Ref T10390. Simplifies dropdown by rolling out canUseInPanel in useless panels
Test Plan: Add a query panel, see less options.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17341
Summary:
Ref T12237. This adds a UI cue for users who have unverified primary addresses, since we no longer send them mail.
Also adds a new `bin/mail unverify` to unverify an address (for example, because mail is bouncing).
Test Plan:
- Unverified my address, saw setup issue.
- Verified my address, no more setup issue.
{F2861820}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12237
Differential Revision: https://secure.phabricator.com/D17344
Summary:
Ref T12237. This tightens our delivery rules, which previously sent normal mail to unverified addresses:
- We sent general mail to unverified addresses so that you wouldn't miss anything between the time you sign up (or have an account created) and the time you verify your address. This was imagined as a slight convenience for users.
- We sent automatic reply mail to unverified addresses if they sent mail to us first, saying "we don't recognize that address". This was imagined as a convenience for users who accidentally send mail "From" the wrong address (personal vs work, for example).
I think both behaviors are probably a little better for users on the balance, but not having mail providers randomly shut us off without warning is better for me, personally -- so stop doing this stuff.
This creates a problem which we likely need to solve before the release is cut:
- On installs which do not require mail verification, mail to you will now mostly-silently be dropped if you never bothered to verify your address.
I'd like to solve this by adding some kind of per-user alert that says "We recently tried to send you some mail but you haven't verified your address.", and giving them links to verify the address and review the mail. I'll pursue this after restoring mail service to `secure.phabricator.com`.
Test Plan:
- Added a unit test.
- Unverified my address, sent mail, saw it get dropped.
- Reverified my address, sent mail, saw it go through.
- Verified that important mail (password reset, invite, confirm-this-address) either uses "Force Delivery" (skips this check) or "Raw To Addresses" (also skips this check).
- Verified that Phacility instance stuff is also covered: it uses the same invite flow.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12237
Differential Revision: https://secure.phabricator.com/D17329
Summary:
Fixes T9719. Currently, the Herald "Test Console" has a big `instanceof` thing, so new adapters (like a Calendar adapter, or third-party adapters) aren't available automatically. Instead, do a standard modular thing: load the available adapters, ask which ones can test the object the user selected, then let the user pick which one they want to move forward with.
Additionally, it isn't very clear that you can't test "commit hook" rules because they rely on push state which we don't really have a good way to simulate. When the user picks a commit, we now show them the "Hook" events, but the options are disabled and explain why they can not be selected.
Test Plan:
- Ran test rules for revisions, commits, mocks, tasks, wiki documents, questions, and outbound mail.
- Plugged in a commit, got a more-helpful choice screen explaining why you do a test run of hook rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9719
Differential Revision: https://secure.phabricator.com/D16360
Summary: Ref T10628. This moves everything else over. I'll clean up the cruft in the next diff.
Test Plan:
- Viewed Conduit API page, toggled tabs.
- Viewed Harbormaster build, toggled tabs.
- Viewed a Drydock lease, swapped tabs.
- Viewed a Drydock resource, swapped tabs.
- Viewed mail, swapped tabs.
- Grepped for `addPropertyList(...)`, looked for any remaining calls with a second argument.
- Also checked rSAAS for any calls, but we don't have anything there that uses tabs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16207
Summary:
Ref T11098. Mixture of issues here:
- Similar problem to D16112, where users with no settings at all could fail to fall back to the global defaults.
- I made `UserPreferencesQuery` responsible for building defaults instead to simplify this, since we have 4 or 5 callsites which need to do it and they aren't easily reducible.
- Handle cases where `metamta.one-mail-per-recipient` is off (and thus users can not have any custom settings) more explicitly.
- When `metamta.one-mail-per-recipient` is off, remove the "Email Format" panel for users only -- administrators can still access it in global preferences.
Test Plan:
- Deleted a user's preferences, changed globals, purged cache, made sure defaults reflected global defaults.
- Changed global mail tags, sent mail to the user, verified it was dropped in accordinace with global settings.
- Changed user's settings to get the mail instead, verified mail was sent.
- Toggled user's Re / Vary settings, verified mail subject lines reflected user settings.
- Disabled `metamta.one-mail-per-recipient`, verified user "Email Format" panel vanished.
- Edited "Email Format" in single-mail-mode in global prefs as an administrator.
- Sent more mail, verified mail respected new global settings.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16118
Summary: Ref T11098. There is no reason to maintain these as separate values now that they can be configured in global settings.
Test Plan:
- Hit and read setup issue.
- Fiddled with settings.
- I'll vet this more throughly in the next diff since I need to fix an issue with global defaults in mail and can explicitly test this at the same time.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16117
Summary:
Ref T4103. Ref T10078. Currently, when a user misses a cache we just build it for them.
This is the behavior we want for the the viewer (so we don't have to build every cache up front if we don't actually need them), but not the right behavior for other users (since it allows performance problems to go undetected).
Make inline cache generation strict by default, then make sure all the things that rely on cache data request the correct data (well, all of the things identified by unit tests, at least: there might be some more stuff I haven't hit yet).
This fixes test failures in D16040, and backports a piece of that change.
Test Plan: Identified and then fixed failures with `arc unit --everything`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16042
Summary:
Ref T4103. This isn't completely perfect but should let us move forward without also expanding scope into "too much mail".
I split the existing "Mail Preferences" into two panels: a "Mail Delivery" panel for the EditEngine settings, and a "2000000 dropdowns" panel for the two million dropdowns. This one retains the old code more or less unmodified.
Test Plan:
- Ran unit tests, which cover most of this stuff.
- Grepped for all removed constants.
- Ran migrations, inspected database results.
- Changed settings in both modified panels.
- This covers a lot of ground, but anything I missed will hopefully be fairly obvious.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16038
Summary:
Ref T4103. These are currently stored on the user, for historic/performance reasons.
Since I want administrators to be able to set defaults for translations and timezones at a minimum and there's no longer a meaningful performance penalty for moving them off the user record, turn them into real preferences and then nuke the columns.
Test Plan:
- Set settings to unusual values.
- Ran migrations.
- Verified my unusual settings survived.
- Created a new user.
- Edited all settings with old and new UIs.
- Reconciled client/server timezone disagreement.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16005
Summary:
Ref T4103. This give preferences a PHID, policy/transaction interfaces, a transaction table, and a Query class.
This doesn't actually change how they're edited, yet.
Test Plan:
- Ran migrations.
- Inspected database for date created, date modified, PHIDs.
- Changed some of my preferences.
- Deleted a user's preferences, verified they reset properly.
- Set some preferences as a new user, got a new row.
- Destroyed a user, verified their preferences were destroyed.
- Sent Conpherence messages.
- Send mail.
- Tried to edit another user's settings.
- Tried to edit a bot's settings as a non-admin.
- Edited a bot's settings as an admin (technically, none of the editable settings are actually stored in the settings table, currently).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15991
Summary: Ref T10694. Switch default mode to HTML since it has a number of significant advantages and we haven't seen reports of significant problems.
Test Plan:
- Switched preference to default (saw "HTML" in UI).
- Sent myself some mail.
- Got HTML mail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15885
Summary:
Ref T10939. Fixes T7834.
- Make packages into mailable objects, like projects and users.
- Packages resolve recipients by resolving project and user owners into recipients.
Test Plan:
- Added a comment to a revision with a package subscriber.
- Used `bin/mail show-outbound` to see that owners got mail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7834, T10939
Differential Revision: https://secure.phabricator.com/D15912
Summary:
Ref T10694. Ref T9790. When generating inline diff context, highlight it and then mangle the highlighted output into `style="..."` so it works in HTML.
Also try to tighten up some spacing/formatting stuff.
Test Plan:
Got some output in this vein:
{F1259937}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9790, T10694
Differential Revision: https://secure.phabricator.com/D15852
Summary: Swaps over to new hotness
Test Plan: Pull up mail view, see new UI
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15616
Summary:
Ref T10709. Two issues:
- If a user sends an invalid `!command`, we can throw, which means we don't return HTTP 200. This makes Mailgun re-send the mail later.
- We don't parse headers of the modern API correctly, so the "Message-ID" failsafe doesn't work. Parse them correctly. I //believe// Mailgun's API changed at some point.
Test Plan:
This is difficult to test exhaustively in isolation. I used Mailgun's web tools to verify the format of the hook request, and faked some requests locally.
I'll keep an eye on this as it goes to production and make sure the fix is correct there.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10709
Differential Revision: https://secure.phabricator.com/D15575
Summary: Runs through Meta, cleaned up policies and editing email addresses to new UI
Test Plan: Set a new Email address for Maniphest, edit policies.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15569
Summary:
Ref T10537. For Nuance, I want to introduce new sources (like "GitHub" or "GitHub via Nuance" or something) but this needs to modularize eventually.
Split ContentSource apart so applications can add new content sources.
Test Plan:
This change has huge surface area, so I'll hold it until post-release. I think it's fairly safe (and if it does break anything, the breaks should be fatals, not anything subtle or difficult to fix), there's just no reason not to hold it for a few hours.
- Viewed new module page.
- Grepped for all removed functions/constants.
- Viewed some transactions.
- Hovered over timestamps to get content source details.
- Added a comment via Conduit.
- Added a comment via web.
- Ran `bin/storage upgrade --namespace XXXXX --no-quickstart -f` to re-run all historic migrations.
- Generated some objects with `bin/lipsum`.
- Ran a bulk job on some tasks.
- Ran unit tests.
{F1190182}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15521
Summary: Fixes T10539. When building mail targets, we fail to preserve whether a recipient was originally "To" or "Cc", and just move everyone to "To".
Test Plan:
Added a comment to a task with a "To" user and a "Cc" user, with `metamta.placeholder-to-recipient` set and `metamta.one-mail-per-recipient` set.
Got mail with me Cc'd as the Cc'd user:
{F1172020}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10539
Differential Revision: https://secure.phabricator.com/D15465
Summary: This inverts colors and icons a bit, so they're not as harsh. So instead of a dark green item with white icon, its now light green with a dark green icon. I've also changed all text and comment boxes to be "grey" visually to separate out the UI from converation/actions. Give it a spin and let me know how this feels. I still need to update the comment UI.
Test Plan:
UIExamples, lots of various tasks and diffs.
{F1163837}
{F1163839}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15442
Summary: Mostly for consistency, we're not using other forms of icons and this makes all classes that use an icon call it in the same way.
Test Plan: tested uiexamples, lots of other random pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15125
Summary:
Ref T10054. Ref T6113. Users can currently subscribe to projects, which causes them to receive:
# mail about project membership changes, description changes, etc; and
# mail to the project, e.g. when the project is added as a subscriber on a task, or a reviewer on a revision.
Almost no one cares about (1), and after D15061 you can use Herald to get this stuff if you really want it. (It will get progressively more annoying in the future with external membership sources causing automated project membership updates.)
A lot of users are confused about (2) and how it relates to membership, watching, etc, and most users who want (2) don't want (1).
Instead, add an explicit option for this and explain what it does.
This is fairly verbose but I've hidden it on the member/watch screen, which is now the "explain how projects work" screen, I guess.
Test Plan:
{F1064929}
{F1064930}
{F1064931}
- Disabled/enabled mail for a project.
- Sent mail to a project with mail disabled, verified I didn't get a copy.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6113, T10054
Differential Revision: https://secure.phabricator.com/D15065
Summary:
Ref T10121. If a user sends mail with duplicate headers, like:
```
X-Duplicate: A
X-Duplicate: B
```
...and we process it with `mail_handler.php`, we may end up with `array('A', 'B')` as the header value. When we try to write this back into an error response mail, it fails.
Test Plan:
- Generated a message with duplicate headers.
- Piped it into `mail_handler.php` with `--process-duplicates` and `--trace` to get a look at it.
- Faked an exception.
- Before patch: bad error email.
- After patch: clean error email showing multiple header values.
```
$ ./bin/mail show-outbound --id 12386
PROPERTIES
ID: 12386
Status: queued
Related PHID:
Message:
PARAMETERS
sensitive: 1
is-error: 1
force: 1
subject: Error Processing Mail (Exception)
raw-to: ["epriestley@phacility.com"]
HEADERS
X-Phabricator-Sent-This-Message: Yes
X-Mail-Transport-Agent: MetaMTA
X-Auto-Response-Suppress: All
TEXT BODY
Your email to Phabricator was not processed, because an error occurred while
trying to handle it:
Exception: TEST
-- Original Message Body -----------------------------------------------------
testy testy
-- Original Message Headers --------------------------------------------------
from: Evan Priestley <epriestley@phacility.com>
content-type: text/plain; charset=us-ascii
content-transfer-encoding: 7bit
x-smtp-server: smtp.gmail.com:epriestley@phacility.com
subject: test outbound mail
message-id: 7isvptmllqvdvtdxthvdwzg3woj5au7csyuh3hopypjv6y6hqb32qm4bcrd4jtid
x-universally-unique-identifier: 4E489E20-F674-49B2-94BA-0DE44F504EAA
date: Mon, 11 Jan 2016 09:50:12 -0800
date: Mon, 11 Jan 2016 09:50:13 -0800
date: Mon, 11 Jan 2016 09:50:14 -0800
date: Mon, 11 Jan 2016 09:50:15 -0800
to: epriestley@yghe.net
mime-version: 1.0 (Mac OS X Mail 8.2 \(2104\))
HTML BODY
(This message has no HTML body.)
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10121
Differential Revision: https://secure.phabricator.com/D14996
Summary:
Fixes T9156.
- Fix hashtag generation.
- Fix various badnesses.
- Improve project name generator.
Test Plan:
```
$ ./bin/lipsum generate projects
GENERATORS Selected generators: Projects.
WARNING This command generates synthetic test data, including user accounts. It is intended for use in development environments so you can test features more easily. There is no easy way to delete this data or undo the effects of this command. If you run it in a production environment, it will pollute your data with large amounts of meaningless garbage that you can not get rid of.
Are you sure you want to generate piles of garbage? [y/N] y
LIPSUM Generating synthetic test objects forever. Use ^C to stop when satisfied.
Generated "Project": Self-Flying Data Center Swag Performance
Generated "Project": Optimize Cars
Generated "Project": Triaging Culture Optimization
Generated "Project": Automating Experience
Generated "Project": Accelerating NUX Performance
Generated "Project": Optimizing Culture Optimization
Generated "Project": Optimize Hardware
```
{F1042949}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9156
Differential Revision: https://secure.phabricator.com/D14874
Summary: Via HackerOne. See D14025. I missed this comparison when making the original change.
Test Plan:
- Used `cat mail.txt | scripts/mail/mail_handler.php --process-duplicates` to pipe mail in a whole lot of times.
- Tried bad hashes, saw rejections.
- Tried good hash, saw mail accepted.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14455
Summary:
We don't use these for anything, we're inconsistent about recording them, and there's some mild interaction with privacy concerns and data retention. Every other log we store any kind of information in can be given a custom retention policy after recent GC changes.
If we did put this back eventually it would probably be better to store a session identifier anyway, since that's more granular and more detailed.
You can fetch this info out of access logs anyway, too.
Test Plan: Left a couple of comments.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14315
Summary: Updates metamta for handleRequest
Test Plan: Unable to test this, but looks safe?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14256
Summary:
Fixes T9494. This:
- Removes all the random GC.x.y.z config.
- Puts it all in one place that's locked and which you use `bin/garbage set-policy ...` to adjust.
- Makes every TTL-based GC configurable.
- Simplifies the code in the actual GCs.
Test Plan:
- Ran `bin/garbage collect` to collect some garbage, until it stopped collecting.
- Ran `bin/garbage set-policy ...` to shorten policy. Saw change in web UI. Ran `bin/garbage collect` again and saw it collect more garbage.
- Set policy to indefinite and saw it not collect garabge.
- Set policy to default and saw it reflected in web UI / `collect`.
- Ran `bin/phd debug trigger` and saw all GCs fire with reasonable looking queries.
- Read new docs.
{F857928}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9494
Differential Revision: https://secure.phabricator.com/D14219
Summary: You can already pass other icons, but this makes it a bit simpler.
Test Plan: Test Maniphest, Badges
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14131
Summary: Fixes T9369.
Test Plan:
- Sent a mail with Mail.app to `bugs@local.phacility.com`.
- Used "View Raw Mail", copy-pasted it into `mail.txt` on disk.
- Ran `cat mail.txt | ./scripts/mail/manage_mail.php --process-duplicates`.
- Saw task get created and me get added as CC.
- Changed "To" to include another user, ran command again, saw task get created and other user get added as CC.
Reviewers: chad
Reviewed By: chad
Subscribers: Korvin
Maniphest Tasks: T9369
Differential Revision: https://secure.phabricator.com/D14086
Summary: See D14025. In all cases where we compare hashes, use strict, constant-time comparisons.
Test Plan: Logged in, logged out, added TOTP, ran Conduit, terminated sessions, submitted forms, changed password. Tweaked CSRF token, got rejected.
Reviewers: chad
Reviewed By: chad
Subscribers: chenxiruanhai
Differential Revision: https://secure.phabricator.com/D14026
Summary:
Email is so exciting I can't wait 30 days for initial results.
ref T9161
Test Plan:
* `./bin/mail volume --days 60` took longer and gave plausibly larger
results.
* `./bin/mail volume --days 0` quickly told me no mail had been sent.
* `./bin/mail volume` Said it was still looking 30 days back.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T9161
Differential Revision: https://secure.phabricator.com/D13901
Summary:
Fixes T9251. Old mail could get saved with bad parameters for two reasons that I can come up with:
- Nothing ever set a parameter on it -- not sure this could ever actually happen; or
- some field contained non-UTF8 data prior to D13939 and we silently failed to encode it.
My guess is that the second case is probably the culprit here.
In any case, recover from this so `20150622.metamta.5.actor-phid-mig.php` can proceed.
Test Plan: Same effective patch as user patch in T9251; looked at some mail to make sure it was still pulling parameters properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9251
Differential Revision: https://secure.phabricator.com/D13990
Summary: Ref T5791. This is still very basic (no global actions, no support for matching headers/bodies/recipients/etc) but gets the core in.
Test Plan:
{F715209}
{F715211}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5791
Differential Revision: https://secure.phabricator.com/D13897
Summary: Ref T5791. This collects outbound mail status in one place and makes the list view a little spiffier.
Test Plan: Looked at list and detail views. Grepped for changed classes/constants.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5791
Differential Revision: https://secure.phabricator.com/D13884
Summary: Use `PhutilClassMaQuery` instead of `PhutilSymbolLoader`, mostly for consistency. Depends on D13588.
Test Plan: Poked around a bunch of pages.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13589
Summary:
Ref T9141. Ref T5791. Ref T7013. Major changes here is:
- Currently, we don't store the headers we actually sent, or the reasons we actually did or did not deliver a mail.
- Start storing these (as `headers.sent` and `actors.sent`).
- Show them in the web UI.
- Show them in `bin/mail show-outbound` (previously, we sort of re-computed them in a hacky way).
- Take them into account in `bin/mail volume`.
Then some minor changes:
- Show mail bodies.
- Show more mail information.
- Start renaming "MetaMTA" to "Mail", at least in the web UI.
Test Plan:
{F707501}
{F707502}
{F707503}
{F707504}
{F707505}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5791, T7013, T9141
Differential Revision: https://secure.phabricator.com/D13878
Summary: Ref T8726. No surprises.
Test Plan:
Created rules using both action variants, applied upgrade, saw rules still work correctly.
{F658842}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13701
Summary:
Ref T8726. Some adapters now have a large number of fields, and we lost the sort-of-human-readable implicit ordering when fields were modularized.
Instead, group and sort fields.
Test Plan: {F603066}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13619
Summary: Ref T8726. This gets rid of all the `VALUE_*` constants and lets Fields provide arbitrary typeaheads without upstream/JS changes.
Test Plan: Used all tokenizers. Used "Another Herald Rule". Grepped for all removed constants.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13616
Summary:
Ref T8726. I want to modularize values and reduce how hard-coded / copypasta'd they are.
- Rename `get...StandardCondition()` to `get...StandardType()`, since we can drive both conditions and values from it.
- Rename `STANDARD_LIST` to `STANDARD_PHID_LIST` for consistency: all "lists" are lists of PHIDs.
- For all standard types which don't require typehaeads, lift their logic into the base class.
- I'll lift typeaheads soon, but need to generalize them first.
Test Plan: Edited various Herald rules, saw value UI generate correctly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13612
Summary: This rule isn't quite right.
Test Plan: Shipped email in with a rule in effect, saw correct value in transcript.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D13578
Summary: Use `PhutilClassMapQuery` where appropriate.
Test Plan: Browsed around the UI to verify things seemed somewhat working.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13429
Summary:
Ref T8726. There's no interface we can check for this, so the adapter needs to opt in.
Also fix a spelling mistake.
Test Plan: Created rules with "Application Email" fields.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13499
Summary: Return `$this` from setter methods for consistency. I started writing a [[https://secure.phabricator.com/differential/diff/32506/ | linter rule]] to detect this, but I don't think it is trivial to do this properly.
Test Plan: Eyeball it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13422
Summary: Move some `PhabricatorSearchField` subclasses to be adjacent to the application to which they belong. This seems generally better to me than lumping them all together in the `src/applications/search/field/` directory. I was also wondering if it makes sense to rename these subclasses as `PhabricatorXSearchField` rather than `PhabricatorSearchXField` (as per T5655), but wasn't really sure if these objects are meant to be search-fields, or just fields belonging to the #search application.
Test Plan: N/A.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13374
