Summary:
Ref T11922. When we deploy on Saturday I need to rebuild all the cluster indexes, but some instances won't have anything indexed so they won't actually trigger the activity.
Add a `--force` flag that just clears an activity even if the activity is not required.
Test Plan: Ran `bin/config done reindex --force` several times.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11922
Differential Revision: https://secure.phabricator.com/D16970
Summary:
Ref T11922. After updating to HEAD of `master`, you need to manually rebuild the index. We don't do this during `bin/storage upgrade` because it can take a very long time (`secure.phabricator.com` took roughly an hour) and can happen while Phabricator is running.
However, if we don't warn users about this they'll just get a broken index unless they go read the changelog (or file an issue, then we tell them to go read the changelog).
This adds a very simple table for notes to administrators so we can write a "you need to go rebuild the index" note, then adds one.
Administrators clear the note by completing the activity and running `bin/config done reindex`. This isn't automatic because there are various strategies you can use to approach the issue, which I'll discuss in greater detail in the linked documentation.
Also, fix an issue where `bin/storage upgrade --apply <patch>` could try to re-mark an already-applied patch as applied.
Test Plan:
- Ran storage ugrades.
- Got instructions to rebuild search index.
- Cleared instructions with `bin/config done reindex`.
Reviewers: chad
Reviewed By: chad
Subscribers: avivey
Maniphest Tasks: T11922
Differential Revision: https://secure.phabricator.com/D16965
Summary:
Ref T11741. This makes everything work if we switch to InnoDB, but never actually switches yet.
Since the default minimum word length (3) and stopword list (36 common English words) in InnoDB are generally pretty reasonable, I just didn't add any setup advice for them. I figure we're better off with simpler setup until we identify some real problem that the builtin stopwords create.
Test Plan: Swapped the `false` to `true`, ran `storage adjust`, got InnoDB fulltext indexes, searched for stuff, got default "AND" behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11741
Differential Revision: https://secure.phabricator.com/D16942
Summary:
Ref T11741. On recent-enough versions of MySQL, we would prefer to use InnoDB for fulltext indexes instead of MyISAM.
Allow `bin/storage adjust` to read actual and expected table engines, and apply adjustments as necessary.
We have one existing bad table that uses the wrong engine, `metamta_applicationemail`. This change corrects that table.
Test Plan:
- Ran `bin/storage upgrade`.
- Saw the adjustment phase apply this change properly:
```
>>>[463] <query> ALTER TABLE `local_metamta`.`metamta_applicationemail` COLLATE = 'utf8mb4_bin', ENGINE = 'InnoDB'
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11741
Differential Revision: https://secure.phabricator.com/D16941
Summary:
Ref T11741. Fixes T10642. Parse and compile user queries with a consistent ruleset, then submit queries to the backend using whatever ruleset MySQL is configured with.
This means that `ft_boolean_syntax` no longer needs to be configured (we'll just do the right thing in all cases).
This should improve behavior with RDS immediately (T10642), and allow us to improve behavior with InnoDB in the future (T11741).
Test Plan:
- Ran various queries in the UI, saw the expected results.
- Ran bad queries, got useful errors.
- Searched threads in Conpherence.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10642, T11741
Differential Revision: https://secure.phabricator.com/D16939
Summary:
Ref T11044. This is still catching the older exceptions, which are now more general.
If you loaded the web UI without MySQL running, this meant you got a less-helpful error.
Test Plan: Stopped MySQL, loaded web UI, got a more-helpful error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16930
Summary:
Ref T11044. This was old Facebook cruft for reading configuration from SMC (and maybe doing some other questionable things). See D183.
(See also D175 for discussion of this from 2011.)
In modern Phabricator, you can subclass `SiteConfig` to provide dynamic configuration, and we do so in the Phacility cluster. This lets you change any config, and change in response to requests (e.g., for instancing) and is generally more powerful than this mechanism was.
This configuration provider theoretically let you roll your own replication or partitioning, but in practice I believe no one ever did, and no one ever could have anyway without more support in the upstream (for migrations, read-after-write, etc).
Test Plan:
- Grepped for removed option.
- Browsed around with clustering off.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16911
Summary:
Ref T11044. One popular tool in a modern operations environment is Puppet. The primary purpose of this tool is to randomly revert hosts to older or different configurations.
Introducing an element of chaotic unpredictability into operations trains staff to be on high alert at all times, rather than lulled into complacency by predictability or consistency.
When Puppet reverts a Phabricator host's configuration to an older version, we might start writing data to a lot of crazy places where it shouldn't go. This will create a big sticky mess that is virtually impossible to undo, mostly because we'll get two files with ID 123 or two tasks with ID 456 or whatever else and good luck with that.
Instead, after changing the partition layout, require `bin/storage partition` to be run. This writes a copy of the config everywhere.
Then, when we start serving web requests, make sure every database has the exact same config. This will foil Puppet by refusing to run requests on hosts it has reverted.
Test Plan:
- Changed partition configuration.
- Ran Phabricator.
- FOILED!
- Ran `bin/storage partition` to sync config.
- Things worked again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16910
Summary:
Ref T11044. Fixes T10931. This option has essentially never been useful for anything, and we've picked the best implementation for a long time (MySQLi if available, MySQL if not).
I am not aware of any reason to ever set this manually. If someone comes up with some bizarre but legitimate use case that I haven't thought of, we can modularize it.
Test Plan: Browsed around. Grepped for `mysql.implementation`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10931, T11044
Differential Revision: https://secure.phabricator.com/D16909
Summary:
Fixes T10759. Fixes T11817. This runs all the general sanity/configuration checks on all the active servers.
None of these warnings are very important, and this doesn't change any logical stuff.
Depends on D16904.
Test Plan: Painstakingly triggered each warning, verified that they rendered correctly and that messages told me which host was affected.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759, T11817
Differential Revision: https://secure.phabricator.com/D16905
Summary:
Ref T10759. Check master/replica status during startup.
After D16903, this also means that we check this status after a database comes back online after being unreachable.
If a master is replicating, fatal (since this can do a million kinds of bad things).
If a replica is not replicating, warn (this just means the replica is behind so some data is at risk).
Also: if your masters were actually configured properly (mine weren't until this change detected it), we would throw away patches as we applied them, so they would only apply to the //first// master. Instead, properly apply all migration patches to all masters.
Test Plan:
- Started Phabricator with a replicating master, got a fatal.
- Stopped replication on a replica, got a warning.
- With two non-replicating masters, upgraded storage.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16904
Summary:
Ref T10759. We may "discover" the presence of a fatal setup error later, after starting Phabricator.
This can happen in a few ways, but most are unlikely. The one I'm immediately concerned about is:
- Phabricator starts up during a disaster with some databases unreachable.
- We start with warnings (unreachable databases are generally not fatal, since it's OK for some subset of hosts to be down in replicated/partitioned setups).
- The unreachable databases later recover and become accessible again.
- When we run checks against them, we discover that they are misconfigured.
Currently, "fatal" setup issues are not truly fatal if we're "in flight" -- we've survived setup checks at least once in the past. This is bad in the scenario above.
Especially with partitioning, it could lead to mangled data in a disaster scenario where operations staff makes a small configuration mistake while trying to get things running again.
Instead, if we "discover" a fatal error while already "in flight", reset the whole setup process as though the webserver had just restarted. Don't serve requests again until we can make it through setup without hitting fatals.
Test Plan:
- Started Phabricator with multiple masters, one of which was down and broken.
- Got a warning about the bad master.
- Revived the master.
- Before: Phabricator detects the fatal, but keeps serving requests.
- After: Phabricator detects the fatal, resets the webserver, and stops serving requests until the fatal is resolved.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16903
Summary:
Ref T10759. Currently, these checks run only against configured masters. Instead, check every host.
These checks also sort of cheat through restart during a recovery, when some hosts will be unreachable: they test for "disaster" by seeing if no masters are reachable, and just skip all the checks in that case.
This is bad for at least two reasons:
- After recent changes, it is possible that //some// masters are dead but it's still OK to start. For example, "slowvote" may have no master, but everything else is reachable. We can safely run without slowvote.
- It's possible to start during a disaster and miss important setup checks completely, since we skip them, get a clean bill of health, and never re-test them.
Instead:
- Test each host individually.
- Fundamental problems (lack of InnoDB, bad schema) are fatal on any host.
- If we can't connect, raise it as a //warning// to make sure we check it later. If you start during a disaster, we still want to make sure that schemata are up to date if you later recover a host.
In particular, I'm going to add these checks soon:
- Fatal if a "master" is replicating.
- Fatal if a "replica" is not replicating.
- Fatal if a database partition config differs from web partition config.
- When we let a database off with a warning because it's down, and later upgrade it to a fatal because we discover it is broken after it comes up again, fatal everything. Currently, we keep running if we "discover" the presence of new fatals after surviving setup checks for the first time.
Test Plan:
- Configured with multiple masters, intentionally broke one (simulating a disaster where one master is lost), saw Phabricator still startup.
- Tested individual setup checks by intentionally breaking them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16902
Summary:
Ref T11044. I'm going to hold this until after the release cut, but I think it's good to go.
This allows installs to configure multiple masters in `cluster.databases` and partition applications across them (for example, put Maniphest on a dedicated database).
When we make a Maniphest connection we go look up which master we should be hitting first, then connect to it.
This has at least approximately been planned for many years, so the actual change is largely just making sure that your config makes sense.
Test Plan:
- Configured `db001.epriestley.com` and `db002.epriestley.com` as master/master.
- Partitioned applications between them.
- Interacted with various applications, saw writes go to the correct host.
- Viewed "Database Servers" and saw partitioning information.
- Ran schema upgrades.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16876
Summary: Depends on D16847. Ref T11044. This updates the remaining storage-related workflows from the CLI to accommodate multiple masters.
Test Plan:
- Configured multiple masters.
- Ran all `bin/storage` workflows.
- Ran `arc unit --everything`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16848
Summary:
Depends on D16115. Ref T11044. In the brave new world of multiple masters, we need to check the schemata on each master when looking for missing storage patches, keys, schema changes, etc.
This realigns all the "check out what's up with that schema" calls to work for multiple hosts, and updates the web UI to include a "Server" column and allow you to browse per-server.
This doesn't update `bin/storage`, so it breaks things on its own (and unit tests probably won't pass). I'll update that in the next change.
Test Plan: Configured local environment in cluster mode with multiple masters, saw both hosts' status reported in web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16847
Summary:
Ref T11044. This moves toward partitioned application databases:
- You can define multiple masters.
- Convert all the easily-convertible code to become multi-master aware.
This doesn't convert most of `bin/storage` or "Config > Database (Stuff)" yet, as both are quite involved. They still work for now, but only operate on the first master instead of all masters.
Test Plan: Configured multiple masters, browsed around, ran `bin/storage` commands, ran `bin/storage --host ...`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16115
Summary:
This has been replaced by `PolicyCodex` after D16830. Also:
- Rebuild Celerity map to fix grumpy unit test.
- Fix one issue on the policy exception workflow to accommodate the new code.
Test Plan:
- `arc unit --everything`
- Viewed policy explanations.
- Viewed policy errors.
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D16831
Summary:
Fixes T11746. The opcache docs are on a different page, so point there if we're raising opcache issues.
(It's possible for a setup issue to say "configure X, or configure Y", where X is opcache and Y is non-opcache, so we may want to render both links.)
Test Plan: {F1867109}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11746
Differential Revision: https://secure.phabricator.com/D16685
Summary: Creates a background that renders inside the Quicksand frame, through sorcery.
Test Plan: Turn on Quicksand, visit lots of pages. See correct background colors. This probably blows something up I'm not testing.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16642
Summary:
Ref T11672. At low loads, this causes us to use more connections, which is pushing some installs over the default limits.
Rather than trying to walk users through changing `max_connections`, `open_files_limit`, `fs.file-max`, `ulimit`, etc., just put things back for now. After T11044 we should have headroom to use persistent connections within the default limits on all reasonable systems..
Test Plan: Loaded Phabricator, poked around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11672
Differential Revision: https://secure.phabricator.com/D16591
Summary:
Fixes T11683. Likely as a result of the persitent connections change, more users are seeing MySQL connection limit errors.
The persistent connections change means we use //fewer// connections at the high end, but I'm guessing PHP is keeping some more connections around in the pool, so while high-traffic hosts use fewer connections, low-traffic hosts now use more.
Raise an explicit setup warning about this. Users should be adjusting it anyway, there's no value to leaving it at extremely low default and connections are baiscally free until you run out of outbound ports.
Test Plan: {F1844630}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11683
Differential Revision: https://secure.phabricator.com/D16586
Summary:
The commit which added checks for the old homepage options (now in
Dashboard) in rP9d9a47e9cf, added them to the auth section, where they
would present:
This option has been migrated to the "Auth" application. Your old
configuration is still in effect, but now stored in "Auth" instead of
configuration. Going forward, you can manage authentication from the
web UI.
Remove them from the moved-to-Auth list, and coalesce the multiple
definitions of the help text into one.
Test Plan:
- set maniphest.priorities.unbreak-now to something
- observe the setup issue reported
- hope it tells you the right thing
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley, chad
Differential Revision: https://secure.phabricator.com/D16576
Summary:
Fixes T11627.
Beyond being complex, I have no real reason to believe these checks even work (and they don't test repositories, file storage, logfiles, etc).
Test Plan:
Faked the error:
{F1813433}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11627
Differential Revision: https://secure.phabricator.com/D16544
Summary:
Ref T11613. In D16503/T11598 I refined the setup flow to improve messaging for early-stage setup issues, but failed to fully untangle things.
We sometimes still try to access a cache which uses configuration before we build configuration, which causes an error.
Instead, store "are we in flight / has setup ever worked?" in a separate cache which doesn't use the cache namespace. This stops us from trying to read config before building config.
Test Plan:
Hit bad extension error with a fake extension, got a proper setup help page:
{F1812803}
Solved the error, reloaded, broke things again, got a "friendly" page:
{F1812805}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11613
Differential Revision: https://secure.phabricator.com/D16542
Summary:
Ref T11589. When we hit a fatal setup issue (essentially always a connection failure) //after// we've already survived them on at least one request, we can be pretty sure a server went down and that the problem is not a setup/configuration issue.
In this case, show a friendlier error page instead of the fairly detailed technical one.
Test Plan:
- Broke MySQL config.
- Restarted Apache.
- Got the "admin/setup" error page:
{F1803268}
- Fixed the MySQL config.
- Loaded any page, to put us "in flight".
- Broke MySQL config.
- Loaded any page.
- Got the friendly "in flight" error page:
{F1803271}
If you want to design this better, easiest way to get to it is:
- Set `mysql.port` to `9999` in `conf/local/local.json`.
- Reload any page while already running (don't restart).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16503
Summary:
Ref T11589. Previously, when we failed to load database configuration we just continued anyway, in order to get to setup checks so we could raise a better error.
There was a small chance that this could lead to pages running in a broken state, where ONLY that connection failed and everything else worked. This was accidentally fixed by narrowing the exceptions we continue on in D16489.
However, this "fix" meant that users no longer got helpful setup instructions. Instead:
- Keep throwing these exceptions: it's bad to continue if we've failed to connect to the database.
- However, catch them and turn them into setup errors.
- Share all the setup code so these errors and setup check errors work the same way.
Test Plan:
- Intentionally broke `mysql.host` and `mysql.pass`.
- Loaded pages.
- Got good setup errors.
- Hit normal setup errors too.
- Put everything back.
- Swapped into cluster mode.
- Intentionally broke cluster mode, saw failover to readonly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16501
Summary:
Ref T11589. This runs:
- preflight checks (critical checks: PHP version stuff, extensions);
- configuration;
- normal checks.
The PHP checks are split into critical ("bad version") and noncritical ("sub-optimal config").
I tidied up the extension checks slightly, we realistically depend on `cURL` nowadays.
Test Plan:
- Faked a preflight failure.
- Hit preflight check.
- Got expected error screen.
- Loaded normal pages.
- Hit a normal setup check.
- Used DarkConsole "Startup" tab to verify that preflight checks take <1ms to run (we run them on every page without caching, at least for now, but they only do trivial checks like PHP versions).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16500
Summary:
Ref T11589. Currently, initialization order is a bit tangled: we load configuration from the database, then later test if we can connect to the database.
Instead, I'm going to do: preflight checks ("PHP Version OK?", "Extensions installed?"), then configuration, then normal setup checks.
To prepare for this, flag core checks as "preflight" and add a setup panel to visually confirm that I didn't miss anything.
Test Plan: {F1803210}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16499
Summary:
Fixes T11590. Currently, we incorrectly consider cluster repository versions that are (or were) on devices which are no longer part of the active cluster service when building this status screen.
Instead, ignore them. This is just a display bug; the actual `ClusterEngine` already had similar logic.
Test Plan:
- Added a bad leader record to `repository_workingcopyversion`.
- Before patch, got a bad "Partial (1w)" sync:
{F1802292}
- After patch, got a good "Sycnchronized":
{F1802293}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11590
Differential Revision: https://secure.phabricator.com/D16492
Summary: Ref T11132, swaps in new UI for welcome page using guide modules
Test Plan: Test instance and non instance guides. Test each setting. Unclear on how to test people / Phacility. Just change the URL link?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16482
Summary: Ref T11132. Adds a text panel to feed if no stories are present and the user is an admin. Seems ok-ish for 15 minutes. Happy to take content suggestions.
Test Plan: Make a new install, see panel. Log in as new user, don't see panel.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16479
Summary: This adds status icons, locked, hidden, editable, customized, to the list of options in config. Makes it easier to read and assertain state.
Test Plan:
View a hidden, customized, editable, and locked.
{F1796320}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16475
Summary: Ref T11559. This makes managing large numbers of repositories slightly easier.
Test Plan: {F1796119}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11559
Differential Revision: https://secure.phabricator.com/D16472
Summary: Ref T11132, significantly cleans up the Config app, new layout, icons, spacing, etc. Some minor todos around re-designing "issues", mobile support, and maybe another pass at actual Group pages.
Test Plan: Visit and test every page in the config app, set new items, resolve setup issues, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam, Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16468
Summary: Ref T11132. This gets rid of the red bar for admins and instead shows a new menu item next to notifications/chat if there are unresolved configuration issues. Menu goes away if there are no issues. May move this later into the bell icon, but think think might be the right place to start especially for NUX and updates. Maybe limit the number of items?
Test Plan:
Tested with some, lots, and no config issues.
{F1790156}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16461
Summary:
Fixes T9235. When the stars align, PHP 5.6 or newer emits a deprecation warning on startup about "always_populate_raw_post_data" which occurs too early for us to intercept and can break responses by adding garbage to the output.
These settings appear to be sufficient:
```
always_populate_raw_post_data = 1
display_errors = 1
display_startup_errors = 1
error_reporting = -1
```
Then make a request with an unusual content type:
```
$ curl -X POST -H "Content-Type: application/json" -d "{foo: bar}" http://phabricator.example.com/
```
This triggers the warning:
```
<br />
<b>Deprecated</b>: Automatically populating $HTTP_RAW_POST_DATA is deprecated and will be removed in a future version. To avoid this warning set 'always_populate_raw_post_data' to '-1' in php.ini and use the php://input stream instead. in <b>Unknown</b> on line <b>0</b><br />
<br />
...
```
To avoid this, just instruct administrators to set this value to "-1", which completely disables the feature and silences the warning.
Test Plan:
- Reproduced this issue by following the instructions above.
- Triggered the setup issue locally and read all the captivating prose:
{F1786911}
- Made the configuration change it directed me to, saw the setup issue resolve.
Reviewers: jcox
Reviewed By: jcox
Maniphest Tasks: T9235
Differential Revision: https://secure.phabricator.com/D16454
Summary: Fixes T8850. Previously, if a user's preamble script mangled `$_SERVER['REMOTE_ADDR']` or somehow set it to `null`, the user would get errors when performing certain actions. Now those errors shouldn't occur, and instead the user will be warned that there is a setup issue related to their preamble script.
Test Plan: Create a preamble script that contains `$_SERVER['REMOTE_ADDR'] = null;` then navigate to /config/issue/. There should be a warning there about `REMOTE_ADDR` not being available.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, yelirekim, epriestley
Maniphest Tasks: T8850
Differential Revision: https://secure.phabricator.com/D16450
Summary: Switches over to new property UI boxes, splits core and apps into separate pages. Move Versions into "All Settings". I think there is some docs I likely need to update here as well.
Test Plan: Click on each item in the sidebar, see new headers.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16429
Summary: Fixes T11501. Let's you pass in a full PHUIIconView or just the icon name to give ObjectListItem a large icon.
Test Plan: Alamanac, Applications, Drydock, Settings, Search Typeahead, Config page...
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11501
Differential Revision: https://secure.phabricator.com/D16421
Summary:
When I wrote this the first time, only hosted repositories could be clustered.
This check wasn't removed when I allowed observed repositories to be clustered in D15986.
Test Plan:
Reloaded {nav Config > Repository Servers} page, saw more stuff locally.
Reviewed the cardinal digits between 1 and 17, inclusive.
Reviewers: chad, avivey
Reviewed By: avivey
Differential Revision: https://secure.phabricator.com/D16392
Summary:
Fixes T11453. Currently, commit message summaries are limited to 80 bytes. This may only be 20-40 characters for CJK languages or langauges with Cyrillic script.
Increase storage size to 255, then truncate to the shorter of 255 bytes or 80 glyphs. This preserves the same behavior for latin languages, but is less tight for Russian, etc.
Some minor additional changes:
- Provide a way to ask "how much data fits in this column?" so we don't have to duplicate column lengths across summary checks or UI errors like "title too long".
- Remove the `text80` datatype, since no other columns use it and we have no use cases (or likely use cases) for it.
Test Plan:
- Made a commit with a Cyrillic title, saw reasonable summarization in UI:
{F1757522}
- Added and ran unit tests.
- Grepped for removed `SUMMARY_MAX_LENGTH` constant.
- Grepped for removed `text80` data type.
Reviewers: avivey, chad
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T11453
Differential Revision: https://secure.phabricator.com/D16385
Summary: Converts final call site to PHUIDocumentViewPro.
Test Plan: grep for PHUIDocumentView, view new Welcome Page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16379
Summary: Fixes T11437. Provides a normal form for configuring this, instead of weird "look up the PHID and adjust things in the database" stuff.
Test Plan:
{F1753651}
{F1753652}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11437
Differential Revision: https://secure.phabricator.com/D16377
Summary:
This updates the eye logo and removes the formal wordmark "Phabricator" as an image. Instead we'll use the new updated eye logo and plain text for "Phabricator", both of which are more friendly and less industrial.
Installs that already use the `header-logo` customization setting will need to rebuild their logo to 80px x 80px. They will then also get to use plain text to whitebox their install as they see fit.
Test Plan:
Tested new logo at desktop, tablet, and mobile sizes. Set a random instance name, saw new wordmark. Created a really long wordmark of MMMMMMMMMMMM, saw text cut off so UI doesn't break. May need some additional tweaking, but I think we covered the most edge cases here.
{F1751791, size=full}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: edibiase, bjshively, yelirekim, Korvin
Maniphest Tasks: T4214, T11096
Differential Revision: https://secure.phabricator.com/D16373
Summary: Ref T9640. Fixes T9888. Decline to support PHP 7 until the async signal handling issue in T11270 is resolved.
Test Plan: Faked local version, got helpful error message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9640, T9888
Differential Revision: https://secure.phabricator.com/D16231
Summary:
Ref T11140. This makes encryption actually work:
- Provide a new configuation option, `keyring`, for specifying encryption keys.
- One key may be marked as `default`. This activates AES256 encryption for Files.
- Add `bin/files generate-key`. This is helps when generating valid encryption keys.
- Add `bin/files encode`. This changes the storage encoding of a file, and helps test encodings and migrate existing data.
- Add `bin/files cycle`. This re-encodes the block key with a new master key, if your master key leaks or you're just paraonid.
- Document all these options and behaviors.
Test Plan:
- Configured a bad `keyring`, hit a bunch of different errors.
- Used `bin/files generate-key` to try to generate bad keys, got appropriate errors ("raw doesn't support keys", etc).
- Used `bin/files generate-key` to generate an AES256 key.
- Put the new AES256 key into the `keyring`, without `default`.
- Uploaded a new file, verified it still uploaded as raw data (no `default` key yet).
- Used `bin/files encode` to change a file to ROT13 and back to raw. Verified old data got deleted and new data got stored properly.
- Used `bin/files encode --key ...` to explicitly convert a file to AES256 with my non-default key.
- Forced a re-encode of an AES256 file, verified the old data was deleted and a new key and IV were generated.
- Used `bin/files cycle` to try to cycle raw/rot13 files, got errors.
- Used `bin/files cycle` to cycle AES256 files. Verified metadata changed but file data did not. Verified file data was still decryptable with metadata.
- Ran `bin/files cycle --all`.
- Ran `encode` and `cycle` on chunked files, saw commands fail properly. These commands operate on the underlying data blocks, not the chunk metadata.
- Set key to `default`, uploaded a file, saw it stored as AES256.
- Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11140
Differential Revision: https://secure.phabricator.com/D16127
