Summary: Ref T10163. When a user autocompletes, add a space for them, unless they already added a comma, colon, or space themsevles.
Test Plan: Autocompleted `@dog`, got `@dog `. Autocompleted `@epriestley,` got `@epriestley,`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15041
Summary:
Ref T10163. Currently, we don't activate on indented lines, but were too aggressive about this, and would not activate on lines like ` - Hey, @user...`, where we should.
Instead, don't activate on indented lines if there's only an indent (i.e., `#` probably means enumerated list).
Also, if results don't have autocompletes (rare but possible with projects missing slugs), improve behavior.
Test Plan:
- Typed ` #a`, got no autocomplete.
- Missing slug thing is a pain to test locallly, `#1 z z z z` reproduces in production. I'll just verify it there.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15040
Summary:
Ref T10163. When we think the user has finished typing a word (because they typed a space, period, or other similar characters) and nothing else they might type could possibly change the outcome (usually because the words they have typed already match nothing), just deactivate the autocomplete.
As a special case, if the word they have typed already select exactly one result, //and// they have already typed exactly that result, assume they just typed it from memory and deactivate.
Test Plan:
- Typed `@dog qwer zxcv` and saw autocomplete deactivate on the space before `z` (on my local install, `@dog` is ambiguous but `@dog qwer` matches nothing).
- Typed `@epriestley ` and saw autocomplete deactivate on space.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15039
Summary: Ref T10163. In cases like Conpherence, the autocompleter can currently render off the bottom of the screen. Put it above if it would be offscreen.
Test Plan: {F1062286}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15038
Summary: Ref T10163. Activate on `@d`, not just `@`. Note that if you type `@d` and then press delete once so you're left with `@`, we stay active (and show the "type a username" hint).
Test Plan:
- Typed `@`, no completer.
- Typed `d`, got completer.
- Typed delete, still had completer, now showing hint prompt.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15037
Summary:
Ref T10163. Some characters are almost certainly punctuation or markup rather than autocomplete requests. Immediately cancel any active autocomplete when the user types one of these.
Note that some of these are also suffix characters. If you type `@dog,`, you have until the next character to decide you actually mean to autocomplete. Once you type something else we deactivate.
If you type `#dog#` or `##`, we deactivate immediately.
Test Plan: Typed `@dog#`, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15036
Summary: Ref T10163. This allows activation in blockquotes or after `NOTE:`, for consistency.
Test Plan: Typed `>@dog`, etc., got autocomplete.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15035
Summary:
Ref T10163.
- If a user types an autocomplete character ("@" or "#") and then a space, deactivate immediately (probably an ordered list).
- If a user types an autocomplete character indented on a line with no other prior text, don't activate (probably an ordered list or code block).
Test Plan:
Typed:
- `# `, saw immediate deactivation.
- ` #`, saw no activation in the first place.
- `#x`, saw activation.
- `asdf #x`, saw activation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15033
Summary: Ref T10163. I would still sometimes not get a replacement after clicking with the delayed blur. This seems to fix the issue more consistently: instead of listening for a click event (which fires after the blur), listen for a mousedown event (which fires before the blur).
Test Plan: Observed consistent selection via mouse locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15032
Summary:
Ref T10163.
- If you click a result, we get a blur before your click hits, and deactivate before the click can work. Instead, wait before responding to blur.
- Use the standard sort handler which puts unixnames over human names. Also use the standard filter which deals with disabled users not matching unless they're the only match.
Test Plan:
- Clicked a result, got a replacement.
- Named myself "dog dog", typed "@dog", user "@dog" was now first match despite me being "@admin".
- Used normal typeaheads to make sure I didn't break sort handler.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15031
Summary: Motivate your employees with inspirational quotes. A new quote every day!
Test Plan: So inspirational.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15026
Summary: Ref T10054. People, projects, and instances no longer use icon nav, so we can get rid of it in favor of profile menus.
Test Plan: Grepped for everything, looked through workboards/profiles again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15022
Summary:
Ref T10054. This makes the profile menu full-height. It uses two pieces of dark magic:
- `calc()`, which allows you to do math in CSS.
- The `vh` unit, which is CSS for "viewport height".
Apparently this kind of stuff just works now? CSS got good at some point?
Test Plan:
- Page looks correct in Safari, Chrome, Firefox.
- Checked `caniuse.com` for `vh` and `calc()`, saw they're supported?
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15017
Summary:
Ref T10054. I haven't done any of the big-picture layout stuff yet, but this should get look-and-feel somewhere in the ballpark of reasonablness, I think.
Major missing stuff:
- No "collapse" state or action yet.
- Menu is not full-height (requires changes to the rendering pipeline).
Test Plan: {F1060941}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15016
Summary: Ref T3725. This probably has 900,000 bugs. This will need updates for subprojects/milestones.
Test Plan:
- Tested very gently in Safari, Firefox and Chrome.
- Reasonable inputs appear to work.
- Clicking, escape, tab, return, arrow keys work OK?
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3725
Differential Revision: https://secure.phabricator.com/D15029
Summary: Ref T10054. Allows users to drag menu items to reorder them.
Test Plan: Reordered a project menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15011
Summary:
Ref T10054. This does a big chunk of the legwork to let users reconfigure profile menus (currently, just project menus).
This includes:
- Editing builtin items (e.g., you can rename the default items).
- Creating new items (for now, only links are available).
This does not yet include:
- Hiding items.
- Reordering items.
- Lots of fancy types of items (dashboards, etc).
- Any UI changes.
- Documentation (does feature: TODO link for documentation).
Test Plan:
{F1060695}
{F1060696}
{F1060697}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15010
Summary: Fixes T10139. This clarification seems reasonable to me.
Test Plan:
- Viewed a revision with context.
- Clicked "Show All Context".
- Saw "All Context Shown".
{F1060624}
{F1060625}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10139
Differential Revision: https://secure.phabricator.com/D15009
Summary:
Ref T4705 (there are also some other adjacent related tasks dealing with URIs).
Currently, we issue a "get repositories matching URIs: ..." query by loading every possible repository and then checking their URIs in PHP.
Instead, put URIs in a separate table. I plan for each repository to potentially have multiple URIs soon, so this prepares for that.
Test Plan:
- Ran migrations.
- Looked at index table, made sure it appeared sensible.
- Ran some queries by `uri` to find repositories, found the repositories I expected.
- Updated the remote URI of a repository, saw queries / index update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4705
Differential Revision: https://secure.phabricator.com/D15005
Summary:
Ref T4245.
- Rename "Clone/Checkout As" to "Short Name" in the UI.
- Allow any repository to have a short name, not just hosted repositories.
Test Plan:
- Ran migration.
- Reviewed old transactions, saw they looked good.
- Edited an existing repository's short name.
- Gave an imported repository a new short name.
- Removed a repository's short name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14989
Summary: Fixes T10116.
Test Plan:
- Prior to patch: Control/Command + Enter submitted form but ignored actions.
- After patch: verifid command + enter submits actions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10116
Differential Revision: https://secure.phabricator.com/D14991
Summary:
Fixes T7938.
- Primarily, users can currently shoot themselves in the foot by putting `../../etc/passwd` and other similar nonsense in these fields (this is not dangerous, but also does not work). Require sensible names.
- Enforce uniqueness so these names can be used in URIs and as identifiers in the future.
- (This doesn't start actually using them for anything fancy yet.)
Test Plan:
- Gave several repositories clone names: a valid name, two duplicate names, an invalid, name, some with no names.
- Ran migrations.
- Got clean conversion for valid names, appropriate errors for invalid/duplicate names.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7938
Differential Revision: https://secure.phabricator.com/D14986
Summary:
Ref T10010. Ref T5819. General alignment of the stars:
- There were some hacks in Conduit around stripping `fa-...` off icons when reading and writing that I wanted to get rid of.
- We probably have room for a subtitle in the new heavy nav, and using the icon name is a good starting point (and maybe good enough on its own?)
- The project list was real bad looking with redundant tag/names, now it is very slightly less bad looking with non-redundant types?
- Some installs will want to call Milestones something else, and this gets us a big part of the way there.
- This may slightly help to reinforce "tag" vs "policy" vs "group" stuff?
---
I'm letting installs have enough rope to shoot themselves in the foot (e.g., define 100 icons). It isn't the end of the world if they reuse icons, and is clearly their fault.
I think the cases where 100 icons will break down are:
- Icon selector dialog may get very unwieldy.
- Query UI will be pretty iffy/huge with 100 icons.
We could improve these fairly easily if an install comes up with a reasonable use case for having 100 icons.
---
The UI on the icon itself in the list views is a little iffy -- mostly, it's too saturated/bold.
I'd ideally like to try either:
- rendering a "shade" version (i.e. lighter, less-saturated color); or
- rendering a "shade" tag with just the icon in it.
However, there didn't seem to be a way to do the first one right now (`fa-example sh-blue` doesn't work) and the second one had weird margins/padding, so I left it like this for now. I figure we can clean it up once we build the thick nav, since that will probably also want an identical element.
(I don't want to render a full tag with the icon + name since I think that's confusing -- it looks like a project/object tag, but is not.)
Test Plan:
{F1049905}
{F1049906}
Reviewers: chad
Reviewed By: chad
Subscribers: 20after4, Luke081515.2
Maniphest Tasks: T5819, T10010
Differential Revision: https://secure.phabricator.com/D14918
Summary:
Fixes T9323. Two minor fixes:
- On the first commit, don't render a downward line.
- Clean up a 1px spacing issue that had cropped up a while ago when we added icons or something, I think.
Test Plan:
Before:
{F1057248}
After:
{F1057249}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9323
Differential Revision: https://secure.phabricator.com/D14974
Summary: Creates a new next/previous UI for PhamePosts, and adds a setFoot to PHUIDocumentViewPro for future use in other apps.
Test Plan:
Test first, next, last posts on Phame in mobile, desktop, and tablet breakpoints.
{F1050152}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14919
Summary: Ref T10004. This control doesn't disable visually or behaviorally, e.g. when locked in an EditEngine configuration.
Test Plan:
- Locked field for Projects.
- Reviewed form in EditEngine.
- Created/edited a project.
- Swapped default.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14911
Summary:
Ref T10010. This has a lot of UI/UX problems but I think it:
- technically allows subproject creation;
- technically allows milestone creation;
- doesn't let users unwittingly destroy their installs (probably).
Test Plan:
- Created milestones.
- Created subprojects.
- Created and edited normal projects.
- Observed some reasonable interactions (e.g., you can't create milestones for a milestone or edit a superproject's members).
- Observed plenty of silly/confusing interactions that need additional work.
{F1046657}
{F1046658}
{F1046655}
{F1046656}
{F1046654}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14904
Summary:
Ref T10010. This will allow us to find superprojects with `withMemberPHIDs(...)` queries.
- Copy all the current real member edges to materialized member edges.
- Redirect all reads to look at materialized members.
- This table is already kept in sync by earlier work with indexing.
Basically, flow is:
- Writes (joining, leaving, adding/removing members) write to the real member edge type.
- After a project's members change, they're copied to the materialized member edge type for that project and all of its superprojects.
- Reads look at materialized members, so "Parent" sees the members of "Child" and "Grandchild" as its own members, but we still have the "real members" edge type to keep track of "natural" or "direct" members.
Test Plan:
- Ran migration.
- Ran unit tests.
- Saw the same projects as projects I was a member of.
- Added some `var_dump()` stuff to verify the Owners changed.
- Used `grep` to look for other readers of this edge type.
- Made some project updates.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14893
Summary: Ref T10004. This primarily supports moving Phame to EditEngine.
Test Plan: {F1045166}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14887
Summary:
Ref T9994.
- Allow errors to be dismissed.
- Tailor messaging for closed/abandoned revisions.
- Reduce scare messaging on land dialog, since it's not really that scary anymore.
Test Plan:
- Dismissed errors.
- Hit new warnings.
- Wasn't as scared when landing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9994
Differential Revision: https://secure.phabricator.com/D14886
Summary: I'll revert this within 24 hours, before I promote.
Test Plan: Had completely functional but greatly enhanced Phabricator experience in Firefox, Safari and Chrome.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14884
Summary: Ref T8980. Previously, if you had like `T123T123T123` and waved your mouse over them, we wouldn't move the card. Now, move the card.
Test Plan: Waved mouse. Saw the card move.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8980
Differential Revision: https://secure.phabricator.com/D14881
Summary: Ref T8980. This calculation was not quite right and you could sneak one off screen if you tried carefully.
Test Plan: Couldn't sneak one off screen anymore.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8980
Differential Revision: https://secure.phabricator.com/D14880
Summary:
Ref T8980. Move away from events to EngineExtensions.
This also simplifies hovercards a bit:
- Removes tasks from revision cards.
- Removes blockers/blocked from task cards.
- Removes "Send Message" from user cards.
These mostly felt cluttery to me. Open to arguments to retain them. I think we can make better use of the space, though (e.g., flags, projects + board columns).
Test Plan:
- Viewed people, task, revision, commit and project hovercards.
{F1043256}
{F1043257}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8980
Differential Revision: https://secure.phabricator.com/D14878
Summary:
Ref T10010. This adds infrastructure for querying projects by type, depth, parent and ancestor.
I needed to revise the "extended policy check" cycle detection rules. When, e.g., querying a grandchild, they incorrectly detected a cycle because both the child and grandchild needed to check the policy of the grandparent.
Instead, simplify it to just do a basic runaway calldepth check. There are many other safety mechanisms to make it so this can't ever occur.
(Cycle detection does have existing test coverage, and those tests still pass, it just takes a little longer to detect the cycle internally.)
There is still no way to create subprojects in the UI.
Test Plan: Added and executed unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14862
Summary:
Ref T10010. This implements technical groundwork for subprojects. Specifically, it implements policy rules like Phriction:
- to see a project, you must be able to see all of its parents (and the project itself).
- you can edit a project if you can edit any of its parents (or the project itself).
To facilitiate this, we load all project ancestors when querying projects so we can do the view/edit checks.
This does NOT yet implement:
- proper membership rules for these projects (up next);
- any kind of UI to let users create subprojects.
Test Plan:
- Added unit tests.
- Executed unit tests.
- Browsed Projects (no change in behavior is expected).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14861
Summary: Ref T5240. We don't currently use any of these options and I don't think we have any plans to use them. Strip them out for now to make fixing drag-and-drop stuff easier.
Test Plan: Grepped for removed stuff, no hits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D14864
Summary:
Ref T10004. This might be a little too funky or magical, but is probably not necessary too often and easier than doing new layout with the CSS.
Also make the desktop icons a little meatier.
Test Plan: Swiped things away on mobile. Clicked things away on desktop.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14857
Summary:
Fixes T1895. Now that we have on-demand prviews, we can use them on mobile. On mobile:
- don't show live previews;
- only save drafts every 10 seconds.
Also, show fewer remarkup buttons on mobile to try to make sure the more important ones (preview, e.g.) fit.
Test Plan:
- Made window narrower and wider to trigger preview/no-preview behavior.
- Used DarkConsole to verify request rate.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T1895
Differential Revision: https://secure.phabricator.com/D14856
Summary:
Ref T3967. This gives us a reasonable baseline for doing remarkup previews inline in all contexts, and works in weird/constrained context including:
- inline comments;
- conpherence; and
- custom fields.
It would be nicer to go beyond this in contexts like Phame posts, but this is a start, at least.
Test Plan:
{F1040877}
{F1040878}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3967
Differential Revision: https://secure.phabricator.com/D14855
Summary:
Fixes T10039. We add text to textareas in two cases:
- Users clicking assitance buttons in Remarkup text areas.
- Drag-and-drop file uploads.
In case (1), it makes sense to highlight the text (it shows the user what we inserted, and lets them undo the action easily if it isn't what they wanted).
In case (2), it does not. Users almost never want to delete or edit a file reference. It is slightly nice to have the reference as a visual callout, but I don't think this is a big deal.
Change the behavior so that we highlight only for remarkup buttons, not for drag-and-drop files.
Test Plan:
- Clicked an "isnert quote" button on remarkup assist area, got highlighted example text.
- Dragged and dropped a file, got text inserted with no highlight.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10039
Differential Revision: https://secure.phabricator.com/D14851
Summary:
Ref T9979. This uses ngrams (specifically, trigrams) to build a reasonably efficient index for substring matching. Specifically, for a package like "Example", with ID 123, we store rows like this:
```
< ex, 123>
<exa, 123>
<xam, 123>
<amp, 123>
<mpl, 123>
<ple, 123>
<le , 123>
```
When the user searches for `exam`, we join this table for packages with tokens `exa` and `xam`. MySQL can do this a lot more efficiently than it can process a `LIKE "%exam%"` query against a huge table.
When the user searches for a one-letter or two-letter string, we only search the beginnings of words. This is probably what they want, the only thing we can do quickly, and a reasonable/expected behavior for typeaheads.
Test Plan:
- Ran storage upgrades and search indexer.
- Searched for stuff with "name contains".
- Used typehaead and got sensible results.
- Searched for `aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz` and saw only 16 joins.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9979
Differential Revision: https://secure.phabricator.com/D14846
Summary:
Fixes T9890. This allows IndexExtensions to emit an object version.
Before we build indexes, we check if the indexed version is the same as the current version. If it is, we just don't call that extension.
T9890 has a case where this is useful: a script went crazy and posted thousands of comments to a single task.
Without versioning, that results in the same comments being indexed over and over again. With versioning, most of the queue could just exit without doing any work.
Test Plan:
- Added a `sleep(1)` to the actual indexing, used `bin/search index --background` to queue up a lot of tasks, ran them with `bin/phd debug task`, saw them complete very quickly with only one actual index operation performed.
- Used `bin/search index --trace` and `bin/search index --trace --background` to observe the behavior of queries against the index version store, which looked sensible.
- Made comments/transactions, saw versions update.
- Used `bin/remove destroy`, verified index versions were purged.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9890
Differential Revision: https://secure.phabricator.com/D14845
Summary: Adds basic NUX to Dashboards, Herald, Repositories, Maniphest. Note Herald and Dashboard Panels don't fine the nux for some reason, assume they will when modernized?
Test Plan: Read text, click buttons.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14844
Summary: Currently it's difficult to notice posts may be much longer than the summary (in most cases, actually), Adds a consistent "Read More" link to the full post. Also made sure "violet" was more consistantly used.
Test Plan:
Review summaries in Phame
{F1031799}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14827
Summary: Ref T9967
Test Plan:
Ran migrations.
Verified database populated properly with PHIDs (SELECT * FROM auth_sshkey;).
Ran auth.querypublickeys conduit method to see phids show up
Ran bin/remove destroy <phid>.
Viewed the test key was gone.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9967
Differential Revision: https://secure.phabricator.com/D14823
Summary:
Ref T10010. This does some cleanups on the schema:
- `viewPolicy`, `editPolicy` and `joinPolicy` were nullable, but should never be `null`. Set them to defaults if they're null, then make the column non-nullable.
- Rename `phrictionSlug` to `primarySlug` and stop adding and removing trailing slashes from it.
- Add new columns to support milestones and non-milestone subprojects.
- Drop very old subprojectPHIDs column. This hasn't done anything in the UI for years and years, and isn't particularly realistic to migrate forward.
The new columns aren't reachable from the UI.
Test Plan:
- Applied patches.
- Grepped for `phrictionSlug`.
- Grepped for `subprojectPHIDs`.
- Created tasks.
- Edited tasks.
- Verified existing tasks still had primary slugs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14825
Summary:
Fixes T10012. The permissions here are little weird: you need edit permission on the //configurations//, not the //engines//. I was checking edit permission on the engines only.
I should possibly make this a bit more consistent, the engine edit permission is just very convenient to use to enforce object create permission right now. I'll likely clean this up after T9789.
Test Plan:
- Tried to reorder forms as a less-privileged user, got proper policy errors.
- Reordered forms normally as a regular user.
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10012
Differential Revision: https://secure.phabricator.com/D14824
Summary: Fixes T9871. Ref T10004. These won't win any awards but it fixes them being incredibly weird and confusing.
Test Plan:
{F1029090}
- Tried to use controls, got reasonable behavior.
- Used normal controls to make sure I didn't break anything.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9871, T10004
Differential Revision: https://secure.phabricator.com/D14814
Summary:
Ref T10004. After a user logs in, we send them to the "next" URI cookie if there is one, but currently don't always do a very good job of selecting a "next" URI, especially if they tried to do something with a dialog before being asked to log in.
In particular, if a logged-out user clicks an action like "Edit Blocking Tasks" on a Maniphest task, the default behavior is to send them to the standalone page for that dialog after they log in. This can be pretty confusing.
See T2691 and D6416 for earlier efforts here. At that time, we added a mechanism to //manually// override the default behavior, and fixed the most common links. This worked, but I'd like to fix the //default// beahvior so we don't need to remember to `setObjectURI()` correctly all over the place.
ApplicationEditor has also introduced new cases which are more difficult to get right. While we could get them right by using the override and being careful about things, this also motivates fixing the default behavior.
Finally, we have better tools for fixing the default behavior now than we did in 2013.
Instead of using manual overrides, have JS include an "X-Phabricator-Via" header in Ajax requests. This is basically like a referrer header, and will contain the page the user's browser is on.
In essentially every case, this should be a very good place (and often the best place) to send them after login. For all pages currently using `setObjectURI()`, it should produce the same behavior by default.
I'll remove the `setObjectURI()` mechanism in the next diff.
Test Plan: Clicked various workflow actions while logged out, saw "next" get set to a reasonable value, was redirected to a sensible, non-confusing page after login (the page with whatever button I clicked on it).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14804
Summary:
Ref T9992. This is a step on the path to getting EditEngine working in Badges, Projects and Calendar.
This doesn't add a new `EditField` for icons yet, just standardizes the old stuff. New stuff is more general and I saved 150 lines of code.
I put the endpoint in Files because the similar "choose a profile picture" endpoint will definitely go there, and this endpoint might eventually feature, like, "draw your own icon~~" or something.
Test Plan:
- Created events, projects and badges with custom icons.
- Edited events, projects and badges, changing their icons.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9992
Differential Revision: https://secure.phabricator.com/D14799
Summary:
Ref T9908. Fixes T6205.
This is largely some refactoring to improve the code. The new structure is:
- Each EditField has zero or one "submit" (normal edit form) controls.
- Each EditField has zero or one "comment" (stacked actions) controls.
- If we want more than one in the future, we'd just add two fields.
- Each EditField can have multiple EditTypes which provide Conduit transactions.
- EditTypes are now lower-level and less involved on the Submit/Comment pathways.
Test Plan:
- Added and removed projects and subscribers.
- Changed task statuses.
- In two windows: added some subscribers in one, removed different ones in the other. The changes did not conflict.
- Applied changes via Conduit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6205, T9908
Differential Revision: https://secure.phabricator.com/D14789
Summary:
Fixes T9995. I think letting users customize slugs is not a hugely compelling as a product feature, and this fixes the issue with slugs that have "/" characters in them and makes the move to EditEngine easier since I don't have to deal with the weird JS thing.
Instead, just generate slugs automatically. No more JS, no more separate field, things automatically update if you rename a blog, and now that URIs have IDs in them the old URI will still work after a rename.
Test Plan:
- Applied migration.
- Created new posts.
- Edited existing posts.
- Visited various posts.
- Created a post with a bunch of "/" in the title, things still worked fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9995
Differential Revision: https://secure.phabricator.com/D14792
Summary:
Fixes T9984. When a tokenizer only allows one selection (like "Task Owner:" or "Land Onto Branch:"), keep the browse button active but have it //replace// values.
Also, have "Create Subtask" default to the system default status, so subtasks of closed tasks are not also closed.
Test Plan:
- Browsed an empty limit=1 tokenizer.
- Replaced a full limit=1 tokenizer.
- Browsed an empty no-limit tokenizer.
- Browsed more tokens into the no-limit tokenizer.
- Typed some tokens normally.
- Created a subtask of a closed task.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9984
Differential Revision: https://secure.phabricator.com/D14785
Summary: Better color, space for Blog List.
Test Plan: Review PhameHome at mobile, tablet and desktop breakpoints.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14749
Summary: Ref T9927. Adds a "Blogs" section to PhameHome. Removes "New Post" Controller. Adds flipped layout for PHUITwoColumnView
Test Plan:
Test PhameHome, Ponder, New Post, etc. Mobile and Desktop states.
{F1022080}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: johnny-bit, Korvin
Maniphest Tasks: T9927
Differential Revision: https://secure.phabricator.com/D14744
Summary: Ref T7858. Don't let users add multiple values to single-value tokenizers by using the "Browse" button.
Test Plan:
- Added a token, browse button was disabled.
- Removed the token, browse button was enabled again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7858
Differential Revision: https://secure.phabricator.com/D14738
Summary: Ref T9952. See discussion there. This change is primarily aimed at letting me build a typeahead of branches in a repository so that we can land to arbitrary branches a few diffs from now.
Test Plan:
- Ran migrations.
- Verified database populated properly with PHIDs (`SELECT * FROM repository_refcursor;`).
- Ran `bin/repository update`.
- Viewed a Git repository in Diffusion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9952
Differential Revision: https://secure.phabricator.com/D14731
Summary: Makes this more consistent. Also clean up spacing. Ref T9414
Test Plan: Archive/Activate Paste, Edit Paste
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9414
Differential Revision: https://secure.phabricator.com/D14724
Summary:
Ref T9132. Ref T9908. Puts reordering UI in place:
- For create forms, this just lets you pick a UI display order other than alphabetical. Seems nice to have.
- For edit forms, this lets you create a hierarchy of advanced-to-basic forms and give them different visibility policies, if you want.
Test Plan:
{F1017842}
- Verified that "Edit Thing" now takes me to the highest-ranked edit form.
- Verified that create menu and quick create menu reflect application order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132, T9908
Differential Revision: https://secure.phabricator.com/D14704
Summary:
Ref T9908. Simplify some of the policies here:
- If you can edit an application (currently, always "Administrators"), you can view and edit all of its forms.
- You must be able to edit an application to create new forms.
- Improve some error messages.
- Get about halfway through letting users reorder forms in the "Create" menu if they want to sort by something weird since it'll need schema changes and I can do them all in one go here.
Test Plan:
- Tried to create and edit forms as an unprivileged user.
- Created and edited forms as an administrator.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14700
Summary:
Fixes T7848. @jasonfsmitty discussed an issue in great detail there and in D14359, and I completely missed it. Specifically:
- If you save a "Change status to: Open" rule in Maniphest, and then edit it again, the token shows "Unknown Object (???)" instead of the correct token.
- That's because loadHandles() has no idea what to do with the value "open", since it's not a real PHID.
The way we render tokenizer tokens in Herald is quite hacky right now. Fortunately, I wrote a //slightly// better way for EditEngine yesterday or the day before. Use the slightly better way to fix the issue with D14359.
This could still be better than it is, but the badness is mostly hidden now and can be cleaned up later without impacting anything.
Test Plan: Edited a Herald rule with projects and status changes, saw proper tokens.
Reviewers: chad
Reviewed By: chad
Subscribers: jasonfsmitty
Maniphest Tasks: T7848
Differential Revision: https://secure.phabricator.com/D14682
Summary:
Ref T9132. Fixes T4580. Thhat might actually have been fixed a while ago or something since it describes a buggy/bad interaction which doesn't reproduce for me at HEAD.
This saves and restores all the stacked actions (subscribers, projects, etc) so that you don't lose anything if you close a window by accident.
Test Plan:
Added a bunch of actions in various states, reloaded the page, draft stuck around.
Submitted form, actions didn't stick around anymore.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4580, T9132
Differential Revision: https://secure.phabricator.com/D14675
Summary:
Ref T9132. We currently have an old preview/draft behavior and a new actions behavior.
Let the actions behavior do drafts/previews too, so we can eventually throw away the old thing.
This is pretty much just copying the old behavior into the new one, but with a few tweaks. The major change is that we submit all the stacked actions behavior now, so the preview reflects everything the change will do (and, soon, we can save it in the draft in a consistent way).
Also includes one hack-fix that I'll clean up at some point.
Test Plan: Added a bunch of stacked actions and observed meaningful previews.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14672
Summary:
Ref T9132. This is kind of a mess because the tokenizer rewrite left rendering tokenizers in Javascript a little rough. This causes bugs like icons not showing up on tokens in the "Policy" dialog, which there's a task for somewhere I think.
I think I've fixed it enough that the beahavior is now correct (i.e., icons show up properly), but some of the code is a bit iffy. I'll eventually clean this up properly, but it's fairly well contained for now.
Test Plan:
- Reassigned a task.
- Put a task up for grabs.
- No reassign on closed tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14669
Summary: Ref T9132. Supports selects in stacked actions and adds "Change Status" + "Change Priority".
Test Plan: Changed status and priority from stacked actions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14667
Summary: Ref T9132. Shhh this never happened shhhhhhh.
Test Plan: Selected multiple actions, saw them add at the bottom.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14664
Summary:
Ref T9132. Like D14659, I'll hold this until after the cut.
This swaps commenting in Maniphest over to EditEngine / stackable actions. New code doesn't have parity yet, although none of the things we're missing should technically be //strictly mandatory//. There's a list inline. I'll restore these in the next diffs.
Briefly -- comments, subscribers and projects work. Status, owners and priority do not yet.
Test Plan:
- Made comments and added subscribers and projects.
- Read through the old code to look for missing features and tried to document them all.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14663
Summary: Provides a real 2x avatar and offers new built in images for profile pictures.
Test Plan: reload profile, see sharper image, pick eevee, see eevee
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14668
Summary: Updates some internal builtin image defaults for 2x, and adds some new ones for profiles
Test Plan: View my profile, still works
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14661
Summary: Ref T9132. This still has a lot of rough edges but the basics seem to work OK.
Test Plan: {F1012627}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14653
Summary:
Ref T9132. Fixes T5031. This approximately implements the plan described in T5031#67988:
When we recieve a preview request, don't write a draft if the form is from a version of the object before the last update the viewer made.
This should fix the race-related (?) zombie draft comments that sometimes show up.
I just added a new object for this stuff to make it easier to do stacked actions (or whatever we end up with) a little later, since I needed to do some schema adjustments anyway.
Test Plan:
- Typed some text.
- Reloaded page.
- Draft stayed there.
- Tried real hard to get it to ghost by submitting stuff in multiple windows and typing a lot and couldn't, although I didn't bother specifically narrowing down the race condition.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5031, T9132
Differential Revision: https://secure.phabricator.com/D14640
Summary: Better mobile spacing, post spacing.
Test Plan: Eyeball it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14620
Summary: Provides more information that a post is a draft.
Test Plan:
Add a draft post, see new style. Check Blog as non-editor, don't see draft post.
{F1008655}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D14613
Summary: Creates a new PhameBlogView which is more of a blog landing page with the latest posts. Management has moved to PhameManageController with a new timeline.
Test Plan:
Edit Blog, Publish, Subscribe, view posts.
{F1008400}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D14608
Summary: Will use these more in the upcoming unbeta design of PhameBlog, likely. Also curious how this works.
Test Plan: Add an image to a blog, remove an image from a blog.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14587
Summary: Lists that have task objects look bad since the objects bleed into each other vertically. This provides slightly better spacing.
Test Plan: Review T9379 with new spacing.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14588
Summary: This makes document views a little more automatic, and a little more style to the page. The Document itself remains on a pure white centered background, but footer and preceeding objects go back to the original body color. This provides a bit more depth and separation over content and definitions/comments.
Test Plan:
Tested Phriction, Diviner, Legalpad, Phame, Email Commands, HTTP Commands, with and without a footer.
{F1005853}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14582
Summary: Darken up the Preamble UI and provide more //dramatic// spacing. Fixes T9866
Test Plan: Review a preamble.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9866
Differential Revision: https://secure.phabricator.com/D14579
Summary: Moves to showing Legalpad previews using PHUIDocumentViewPro
Test Plan: Create a new document, edit an existing document
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14550
Summary: New icons
Test Plan: Use new icons
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14568
Summary: Reuse PHUIMarkupPreviewView in Phame for consistency, less custom code. Also, doesn't work (JS issue).
Test Plan: New Post, Edit Post, Save Post
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14552
Summary: This paragraph shouldn't get extra margin when inside a blockquote.
Test Plan: Quote some text, see less margin.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14549
Summary: This rule should correctly target the last //direct// descendent child of .phabricator-remarkup, and not grandchildren. Fixes T9833
Test Plan: Test commenting, documents, descriptions, and other remarkup areas. All spacing seems consistent.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9833
Differential Revision: https://secure.phabricator.com/D14548
Summary: Fixes T9793, the selector is triggering on the last child of every child of phabricator-remarkup, not the last child of phabricator-remarkup
Test Plan: Checkout latest changelog
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9793
Differential Revision: https://secure.phabricator.com/D14544
Summary:
Ref T9132. Allows fields to be locked (shown, but not modifiable) and hidden (not shown).
In both cases, default values are still respected.
This lets you do things like create a form that generates objects with specific projects, policies, etc.
Test Plan:
- Set defaults.
- Locked and hid a bunch of fields.
- Created new objects using the resulting form.
{F975801}
{F975802}
{F975803}
{F975804}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14509
Summary:
Ref T9132. This just makes edited forms do //something//, albeit not anything very useful yet.
You can now edit a form and:
- Retitle it;
- add a preamble (instructions on top of the form); and
- reorder the form's fields.
Test Plan:
{F974632}
{F974633}
{F974634}
{F974635}
{F974636}
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14503
Summary:
Addresses T9814. Adds SVG files to Celerity maps. Adds a mask-icon.svg file that
I made by pulling the existing favicon into Illustrator and running trace on it.
This hardcodes the header color from the default theme, and doesn't pay attention
to customizations of the header.
Test Plan: I pinned the tab in Safari.
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: chad, Korvin
Maniphest Tasks: T9814
Differential Revision: https://secure.phabricator.com/D14527
Summary: Removes "delete" and uses "archive/activate" instead for Phame Blogs. Ref T9756
Test Plan: Archive a blog, see in search, activate blog, see in other search.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: joshuaspence, Korvin
Maniphest Tasks: T9756
Differential Revision: https://secure.phabricator.com/D14465
Summary:
Ref T9787. To fix this, I want to change how file PHIDs are extracted slightly: specifically, I'm going to extract them later in the editing process.
Before doing this, clean up a couple of bad implementations:
- Owners extracts its description as a file PHID. This is an error.
- Extract the description as a remarkup block instead.
- Add an edge table so stuff like file attachment works properly.
- Differential has a no-op extract method. This is presumably just a copy/paste issue from long ago.
Test Plan:
- Edited a revision in Differential.
- Dropped a file into the description of an Owners package.
- Before change: this did not attach the file.
- After change: the file now attaches properly and shows up as "Attached" in the file details.
Reviewers: chad, joshuaspence
Reviewed By: joshuaspence
Subscribers: joshuaspence
Maniphest Tasks: T9787
Differential Revision: https://secure.phabricator.com/D14493
Summary: Fixes T9757.
Test Plan: Created a Herald rule and then subscribed to it with a different account.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9757
Differential Revision: https://secure.phabricator.com/D14468
Summary: Rename the XHPAST database from `{$NAMESPACE}_xpastview` to `{$NAMESPACE}_xhpast`.
Test Plan: Ran `./bin/storage --namespace test upgrade --no-quickstart`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14442
Summary: Ref T7053. Remove the `envHash` and `envInfo` fields, which are no longer used now that the daemons restart automagically. Depends on D14458.
Test Plan: Saw no more setup issues.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: tycho.tatitscheff, epriestley
Maniphest Tasks: T7053
Differential Revision: https://secure.phabricator.com/D14446
Summary:
Ref T9132. This diff doesn't do anything interesting, it just lays the groundwork for more interesting future diffs.
Broadly, the idea here is to let you create multiple views of each edit form. For example, we might create several different "Create Task" forms, like:
- "New Bug Report"
- "New Feature Request"
These would be views of the "Create Task" form, but with various adjustments:
- A form might have additional instructions ("how to file a good bug report").
- A form might have prefilled values for some fields (like particular projects, subscribers, or policies).
- A form might have some fields locked (so they can not be edited) or hidden.
- A form might have a different field order.
- A form might have a limited visibility policy, so only some users can access it.
This diff adds a new storage object (`EditEngineConfiguration`) to keep track of all those customizations and represent "a form which has been configured to look and work a certain way".
This doesn't let these configurations do anything useful/interesting, and you can't access them directly yet, it's just all the boring plumbing to enable more interesting behavior in the future.
Test Plan:
ApplicationEditor forms now let you manage available forms and edit the current form:
{F959025}
There's a new (bare bones) list of all available engines:
{F959030}
And if you jump into an engine, you can see all the forms for it:
{F959038}
The actual form configurations have standard detail/edit pages. The edit pages are themselves driven by ApplicationEditor, of course, so you can edit the form for editing forms.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14453
Summary: Adds commenting to Phame Posts, also testing a new "document comment style". Unsure about it but Phame is a prototype so good place to explore.
Test Plan: Leave some comments, see some comments, test show/hide.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9746
Differential Revision: https://secure.phabricator.com/D14451
Summary:
This diff adds a new mode argument to the Diffusion Conduit API with two options:
- "overwrite": the default, maintains the current behavior of deleting all coverage
in the specified branch before uploading the new coverage
- "update": does not delete old coverage, but will overwrite previous
coverage information if it's for the same file and commit
`DiffusionRequest::loadCoverage` already loads a file's coverage from the
latest available commit, so uploading coverage for different files in different
commits with "update" will result in seeing the latest uploaded coverage in
Diffusion.
Test Plan: manual local verification
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14428
Summary: Drops Join Policy, uses Edit Policy where needed. Allows anyone with Blog Edit permissions to post and edit any post on that blog. Fixes T5371
Test Plan: Draft Post as chad, see post, log in with notchad, edit that post and publish it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5371
Differential Revision: https://secure.phabricator.com/D14444
Summary: Currently, a bunch of developers are using #xhpast for writing custom linter rules. As such, we end up with a fair few `XHPASTSyntaxErrorException` in our PHP error logs. I think that throwing an exception is not quite correct in this case because it is somewhat expected that invalid PHP may be entered. Instead, catch the exception and show the user a helpful message.
Test Plan: This doesn't quite work yet... the stream and tree views render as blank but the exceptions still propogate to the error logs. Mostly, I'm not sure how the exception should be rendered for display.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14028
Summary: Add some mailkeys, allow feed stories to be published.
Test Plan: New Blog, Edit Blog
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14434
Summary: Larger (open) installs may want to restrict Blog to formal entities, like with Phriction.
Test Plan: Set policy to administrators, have notchad try to create a blog. See error.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14433
Summary: Allows feed stories and mail for new Phame Posts.
Test Plan: Write Post, Get Mail
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14426
Summary: Updates "View Post" to use PHUIDocumentViewPro, updates calls to `newPage` and other minor modernizations. Edit Page updated to show proper document display as well. Ref T9545
Test Plan:
Write a blog post, edit it.
{F945897}
{F945896}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9545
Differential Revision: https://secure.phabricator.com/D14415
Summary:
Fixes T9675.
Fixes the calculation for the difference between the first day of the month and the first day of the week. It was previously possible for this to be negative, which caused the subsequent loop to hang the browser.
Test Plan:
- Set week to start on Sunday. Observed that the calendar still renders fine.
- Set week to start on Monday. Observed that the browser no longer hangs on November 2015.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9675
Differential Revision: https://secure.phabricator.com/D14409
Summary: This is a bit too grey, and doesn't match our theme well (see sequence navs)
Test Plan: Remarkup reference article, sequence navs
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14408
Summary: This just reads easier to me.
Test Plan: Highlight some text, see new padding.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14407
Summary: This margin rule is bleeding in some cases where we wrap `phabricator-remarkup` around a large amount of other content (like Dialogs). This restricts the rule to the first direct child.
Test Plan: Go to a workboard, edit a task, see proper alignment of icons.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14406
Summary:
Fix T9662.
Record who initiated the build, and allow this information as a parameter.
In this implementation, a 're-run' keeps the original initiator, which we maybe not desired?
Test Plan:
Make a HTTP step with initiator.phid, trigger manually, via HM, via ./bin/harbormaster build.
Look at requests made.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9662
Differential Revision: https://secure.phabricator.com/D14380
Summary: Use in MailCommands and HTTP Parameters
Test Plan: Tested MailCommands in Paste, HTTP Parameters in Paste, Legalpad, Diviner. Mobile and Desktop breakpoints.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14397
Summary:
Ref T9132. Although forms do generally support prefilling right now, you have to guess how to do it.
Provide an explicit action showing you which values are supported and how to prefill them. This is generated automatically when an application switches to ApplicationEditor.
Test Plan:
{F939804}
{F939805}
{F939806}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14392
Summary: These fonts are functionally very similar, but in diagnosing a problem with mobile Safari/Chrome, it turned out that our use of "bold" with the "normal" font build created a "semibold" look when on desktop and a "normal" look on mobile. The "semibold" feel is more important, so finding a lighter "bold" font was the impetus for this font switch. As it turns out **Aleo** is built by the same author as **Lato** (our other font) and is intended as it's companion. So stylistically, this is the more correct font.
Test Plan:
Test Phriction, Legalpad, Diviner, Desktop and Mobile
{F938013}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14391
Summary: Generated Roboto Slab with the same settings as Lato, which produces a smaller file. Also hope it fixes mobile kerning.
Test Plan: View various documents, fonts look identical.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14388
Summary: Adds some basic style to new !!Remarkup Highlighter!! Ref T5560
Test Plan: Wait for next diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5560
Differential Revision: https://secure.phabricator.com/D14383
Summary: Rolls out PHUIDocumentViewPro to Legalpad. Minor tweaks to provide space around Preamble and Signature blocks. Otherwise, straight forward.
Test Plan:
Build a new document with and without Preamble, sign document.
{F933386}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14377
Summary:
This implements `PHUIDocumentViewPro` which should move to be the base for all documents (Phame, Phriction, Legalpad, Diviner). Overall this feels really good to me, but I'd like to roll it out into Diviner specifically first to work through the issues and then move into other apps and drop `PHUIDocumentView` once everything is converted. Some features are:
- White Background, no border on page
- Table of Contents is move to hidden menu (more space for documentation)
- Property List sits under the document
Some design decisions above are in anticipation of Phriction v3 and Unbeta Phame, specifically commenting and maybe some cool new Remarkup text layout options for Phame.
Test Plan:
Went through tons of pages on Diviner on Desktop, Tablet, Mobile. Bounce back to Phriction to make sure DocumentView CSS changes actually look better there.
{F930518}
{F930519}
{F930520}
{F930521}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: tycho.tatitscheff, joshuaspence, Korvin
Differential Revision: https://secure.phabricator.com/D14374
Summary: We haven't seen any issues here, remove the table and schema spec.
Test Plan: Not yet tested.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14067
Summary: This makes PHUIPropertyList display wider when an ActionList isn't present.
Test Plan: Review Diff Details in a Diff. Test mobile and desktop layouts.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13568
Summary: Fixes T9609, applies style to a wrapping div for long tables in Remarkup
Test Plan: Build a long table in Phriction, get scrollbar.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9609
Differential Revision: https://secure.phabricator.com/D14355
Summary: Better formatting for object lists when in a dialog (like subscribers).
Test Plan:
Test a subscription list.
{F911522}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14353
Summary:
Ref T182. When viewing a revision, if there are several error operations and then a success operation, we currently show the last error. This is misleading.
Instead, don't show anything if there's a success (this may require tuning eventually if you can land multiple times onto different branches or whatever, but should be reasonable for now).
Also make the table a little nicer, particularly for merge failure output.
Test Plan: {F910385}
Reviewers: chad, Mnkras
Reviewed By: Mnkras
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14348
Summary:
Fixes T9519. Right now, build steps go straight from the build to the edit screen.
This means that there's no way to see their edit history or review details without edit permission. In particular, this makes it a bit harder to catch the Drydock Blueprint authorization warnings from T9519.
- Add a standard view screen.
- Add a little warning callout to blueprint authorizations.
This also does a bit of a touchup on the weird dropshadow element from T9586. Maybe not totally design-approved now but it's less ugly, at least.
Test Plan:
{F906695}
{F906696}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14330
Summary:
Ref T9614. Currently, a lot of Build Plan behavior is covered by a global "can manage" policy.
One install in particular is experiencing difficulty with warring factions within engineering aborting one another's builds.
As a first step to remedy this, and also generally make Harbormaster more flexible and bring it in line with other applications in terms of policy power:
- Give Build Plans normal view/edit policies.
- Require "Can Edit" to run a plan manually.
Having "Can View" on plans may be a little weird in some cases (the status of a Buildable might be bad because of a build you can't see) but we can cross that bridge when we come to it.
Next change here will require "Can Edit" to abort a build. This will reasonably allow installs to reserve pause/abort for administrators/adults. (I might let anyone restart a plan, though?)
Test Plan:
- Created a new build plan.
- Verified defaults were inherited from application defaults (swapped them around, too).
- Saved build plan.
- Edited policies.
- Verified autoplans get the right policies.
- Verified old plans got migrated properly.
- Tried to run a plan I couldn't edit (denied).
- Ran a plan from CLI with `bin/harbormaster`.
- Tried to create a plan with an unprivileged user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9614
Differential Revision: https://secure.phabricator.com/D14321
Summary:
It's hard for us to predict how long patches and migrations will take in the general case since it varies a lot from install to install, but we can give installs some kind of rough heads up about longer patches. I'm planning to just put a sort of hint for things in the changelog, something like this:
{F905579}
To make this easier, start storing how long stuff took. I'll write a little script to dump this into a table for the changelog.
Test Plan:
Ran `bin/storage status`:
{F905580}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14320
Summary:
Ref T182. Replace the total mess we had before with a sort-of-reasonable element.
This automatically updates using "javascript".
Test Plan:
{F901983}
{F901984}
Used "Land Revision", saw the land status go from "Waiting" -> "Working" -> "Landed" without having to mash reload over and over again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14314
Summary: Ref T9336. Links the timeline photo to user profile. Presume this always exists?
Test Plan: Review a few timelines, click on heads.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9336
Differential Revision: https://secure.phabricator.com/D14283
Summary:
Ref T182. This doesn't do anything interesting yet and is mostly scaffolding, but here's roughly the workflow. From previous revision, you can configure "Repository Automation" for a repository:
{F875741}
If it's configured, a new "Land Revision" button shows up:
{F875743}
Once you click it you get a big warning dialog that it won't work, and then this shows up at the top of the revision (completely temporary/placeholder UI, some day a nice progress bar or whatever):
{F875747}
If you're lucky, the operation eventually sort of works:
{F875750}
It only runs `git show` right now, doesn't actually do any writes or anything.
Test Plan:
- Clicked "Land Revision".
- Watched `phd debug task`.
- Saw it log `git show` to output.
- Verified operation success in UI (by fiddling URL, no way to get there normally yet).
Reviewers: chad
Reviewed By: chad
Subscribers: revi
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14266
Summary:
Ref T9551. We currently use the same logic for generating project hashtags and Phriction slugs, but should be a little more conservative with project hashtags.
Stop them from generating with stuff that won't parse in a "Reviewers:" field or generally in commments (commas, colons, etc).
Test Plan:
Created a bunch of projects with nonsense in them and saw them generate pretty reasonable hashtags.
{F873456}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9551
Differential Revision: https://secure.phabricator.com/D14261
Summary:
Ref T9519. When acquiring leases on resources:
- Only consider resources created by authorized blueprints.
- Only consider authorized blueprints when creating new resources.
- Fail with a tailored error if no blueprints are allowed.
- Fail with a tailored error if missing authorizations are causing acquisition failure.
One somewhat-substantial issue with this is that it's pretty hard to figure out from the Harbormaster side. Specifically, the Build step UI does not show field value anywhere, so the presence of unapproved blueprints is not communicated. This is much more clear in Drydock. I'll plan to address this in future changes to Harbormaster, since there are other related/similar issues anyway.
Test Plan: {F872527}
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14254
Summary:
Ref T9519. This is like 80% of the way there and doesn't fully work yet, but roughly shows the shape of things to come. Here's how it works:
First, there's a new custom field type for blueprints which works like a normal typeahead but has some extra logic. It's implemented this way to make it easy to add to Blueprints in Drydock and Build Plans in Harbormaster. Here, I've added a "Use Blueprints" field to the "WorkingCopy" blueprint, so you can control which hosts the working copies are permitted to allocate on:
{F869865}
This control has a bit of custom rendering logic. Instead of rendering a normal list of PHIDs, it renders an annotated list with icons:
{F869866}
These icons show whether the blueprint on the other size of the authorization has approved this object. Once you have a green checkmark, you're good to go.
On the blueprint side, things look like this:
{F869867}
This table shows all the objects which have asked for access to this blueprint. In this case it's showing that one object is approved to use the blueprint since I already approved it, but by default new requests come in here as "Authorization Requested" and someone has to go approve them.
You approve them from within the authorization detail screen:
{F869868}
You can use the "Approve" or "Decline" buttons to allow or prevent use of the blueprint.
This doesn't actually do anything yet -- objects don't need to be authorized in order to use blueprints quite yet. That will come in the next diff, I just wanted to get the UI in reasonable shape first.
The authorization also has a second piece of state, which is whether the request from the object is active or inactive. We use this to keep track of the authorization if the blueprint is (maybe temporarily) deleted.
For example, you might have a Build Plan that uses Blueprints A and B. For a couple days, you only want to use A, so you remove B from the "Use Blueprints: ..." field. Later, you can add B back and it will connect to its old authorization again, so you don't need to go re-approve things (and if you're declined, you stay declined instead of being able to request authorization over and over again). This should make working with authorizations a little easier and less labor intensive.
Stuff not in this diff:
- Actually preventing any allocations (next diff).
- Probably should have transactions for approve/decline, at least, at some point, so there's a log of who did approvals and when.
- Maybe should have a more clear/loud error state when no blueprints are approved?
- Should probably restrict the typeahead to specific blueprint types.
Test Plan:
- Added the field.
- Typed some stuff into it.
- Saw the UI update properly.
- Approved an authorization.
- Declined an authorization.
- Saw active authorizations on a blueprint page.
- Didn't see any inactive authroizations there.
- Clicked "View All Authorizations", saw all authorizations.
Reviewers: chad, hach-que
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14251
Summary:
Ref T9524. Because fetching the last time files were modified in Diffusion can be slow, we bring it in over Ajax.
The logic to fetch and paint the table is kind of fragile because there are two different definitions of the columns right now and we break in a bad way if they differ.
In particular, calling `diffusion.updatecoverage` can populate a "lint commit" for a repository, which tries to generate lint information in one of the views (but not the other one).
In the longer run I think we're removing some of the concepts here and this rendering should be rebuilt to not have two separate column definitions, but just make it degrade gracefully for now since those are larger changes.
Test Plan:
Reproduced the issue in T9524 by calling `diffusion.updatecoverage` on a repostiory. Specifically, this has a side effect of creating a "lint commit" which triggers a "lint" column in this table, sort of.
Applied this patch, got a clean render.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9524
Differential Revision: https://secure.phabricator.com/D14243
Summary:
Fixes T9500. All the code is fine in D13836, but the value of the constant got updated (from "open" to "active") and the migration still used the old value.
Correct any affected dashboards to use the proper constant.
This only affected old dashboards: newly created ones use the right constant.
Test Plan: Ran migration, verified that all active dashboards appeared on "Active Dashboards".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9500
Differential Revision: https://secure.phabricator.com/D14223
Summary: Ref T9352. See D13635. Build targets can have variables already, but let builds have them too. This mostly enables future use cases (sub-builds, more sophisticated build triggers).
Test Plan: With a custom Herald rule + action like the one in T9352, updated a revision and saw it generate multiple builds with varying parameters.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9352
Differential Revision: https://secure.phabricator.com/D14222
Summary:
Ref T9252. Long ago you sometimes manually created resources, so they had human-enterable names. However, users never make resources manually any more, so this field isn't really useful any more.
In particular, it means we write a lot of untranslatable strings like "Working Copy" to the database in the default locale. Instead, do the call at runtime so resource names are translatable.
Also clean up a few minor things I hit while kicking the tires here.
It's possible we might eventually want to introduce a human-choosable label so you can rename your favorite resources and this would just be a default name. I don't really have much of a use case for that yet, though, and I'm not sure there will ever be one.
Test Plan:
- Restarted a Harbormaster build, got a clean build.
- Released all leases/resources, restarted build, got a clean build with proper resource names.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14213
Summary:
Ref T9252. Several general changes here:
- Moves logs to use PHIDs instead of IDs. This generally improves flexibility (for example, it's a lot easier to render handles).
- Adds `blueprintPHID` to logs. Although you can usually figure this out from the leasePHID or resourcePHID, it lets us query relevant logs on Blueprint views.
- Instead of making logs a top-level object, make them strictly a sub-object of Blueprints, Resources and Leases. So you go Drydock > Lease > Logs, etc., to get to logs.
- I might restore the "everything" view eventually, but it doesn't interact well with policies and I'm not sure it's very useful. A policy-violating `bin/drydock log` might be cleaner.
- Policy-wise, we always show you that logs exist, we just don't show you log content if it's about something you can't see. This is similar to seeing restricted handles in other applications.
- Instead of just having a message, give logs "type" + "data". This will let logs be more structured and translatable. This is similar to recent changes to Herald which seem to have worked well.
Test Plan:
Added some placeholder log writes, viewed those logs in the UI.
{F855199}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14196
Summary: Updates to their new logo
Test Plan: review in photoshop
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14199
Summary: I haven't regenerated this for a while and it makes instances and unit tests a little faster.
Test Plan:
- Manually reviewed changes for sanity.
- Ran `arc unit --everything`.
- Observed runtime drop from ~15-16 seconds to ~12-13 seconds.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14192
