Summary:
Ref T4310. Fixes T3720. This change:
- Removes concurrent session limits. Instead, unused sessions are GC'd after a while.
- Collapses all existing "web-1", "web-2", etc., sessions into "web" sessions.
- Dramatically simplifies the code for establishing a session (like omg).
Test Plan: Ran migration, checked Sessions panel and database for sanity. Used existing session. Logged out, logged in. Ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7978
Summary:
Ref T3116. This creates a policy rule where you can require a signature on a given legalpad document.
NOTE: signatures must be for the *latest* document version.
Test Plan: made a task have a custom policy requiring a legalpad signature. verified non-signers were locked out.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D7977
Summary:
Ref T3720. Ref T4310. Currently, we limit the maximum number of concurrent sessions of each type. This is primarily because sessions predate garbage collection and we had no way to prevent the session table from growing fairly quickly and without bound unless we did this.
Now that we have GC (and it's modular!) we can just expire unused sessions after a while and throw them away:
- Add a `sessionExpires` column to the table, with a key.
- Add a GC for old sessions.
- When we establish a session, set `sessionExpires` to the current time plus the session TTL.
- When a user uses a session and has used up more than 20% of the time on it, extend the session.
In addition to this, we could also rotate sessions, but I think that provides very little value. If we do want to implement it, we should hold it until after T3720 / T4310.
Test Plan:
- Ran schema changes.
- Looked at database.
- Tested GC:
- Started GC.
- Set expires on one row to the past.
- Restarted GC.
- Verified GC nuked the session.
- Logged in.
- Logged out.
- Ran Conduit method.
- Tested refresh:
- Set threshold to 0.0001% instead of 20%.
- Loaded page.
- Saw a session extension ever few page loads.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7976
Summary:
Ref T4310. Ref T3720. Two major things are going on here:
- I'm making this table work more like a standard table, which, e.g., makes `delete()` simpler to implement.
- Currently, the primary key is `(userPHID, type)`. I want to get rid of this, issue unlimited sessions, and GC old sessions. This means we can't have a unique key on `(userPHID, type)` anymore. This removes it as the primary key and adds it as a normal key instead. There's no functional change -- the code to generate sessions guarantees that it will never write duplicate rows or write additional rows -- but allows us to drop the `-1`, `-2` qualifiers in the future.
- Also of note, our task is made far simpler here because MySQL will automatically assign values to new `AUTO_INCREMENT` columns, so we don't have to migrate to get real IDs.
Test Plan: Ran migrations, verified table looked sane. Logged out, logged in.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3720, T4310
Differential Revision: https://secure.phabricator.com/D7975
Summary: This modularizes the rest of the GC submethods. Turned out there was nothing tricky.
Test Plan: Ran `bin/phd debug garbage` and got reasonable looking behavior and output.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7971
Summary:
The GC is a big block of hard-coded application GCs right now. Among other things, this means third parties can't tap into the infrastructure.
Modularize it into `GarbageCollector` classes. This implements only one to prove the new stuff works; I'll followup with the rest in the next diff or few depending on how much mess I run into.
Test Plan: Used `bin/phd debug garbage` to run the collector in debug mode, observed reasonable output and behavior.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7970
Summary: Adds "verified" and "secretKey" to Legalpad document signatures. For logged in users using an email address they own, things are verified right away. Otherwise, the email is sent a verification letter. When the user clicks the link the signature is marked verified.
Test Plan: signed the document with a bogus email address not logged in. verified the email that would be sent looked good from command line. followed link and successfully verified bogus email address
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, asherkin
Maniphest Tasks: T4283
Differential Revision: https://secure.phabricator.com/D7930
Summary: Fixes T4317. Update the "inline comment" control to a RemarkupControl. This could maybe use some padding/spacing/design touches eventually but seems OK for the moment.
Test Plan: {F101825}
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T4317
Differential Revision: https://secure.phabricator.com/D7969
Summary: Fixes T3857. Earlier work made this trivial and just left product questions, which I've answered by requiring the daemons to run on reasonable installs.
Test Plan: Ran `bin/search index` and `bin/search index --background`. Observed indexes write in the former case and tasks queue in the latter case. Commented with a unique string on a revision and searched for it a moment later, got exactly one result (that revision), verifying that reindexing works correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7966
Summary:
Ref T3857.
- Always send mail via daemons. This lets us get rid of this config, and is generally much more performant.
- After D7964, we warn if daemons aren't running.
Test Plan: Sent some mail.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7965
Summary:
Currently, we try to mostly-kind-of-work if daemons aren't running (for example, we send mail in-process). I want to stop doing this. A major motivator is that `metamta.send-immediately` is confusing for a lot of users and frequently the cause of performance problems. Increasingly, functionality of applications depends on the daemons (Harbormaster, Drydock, Nuance all require daemons to do anything at all). They're also fairly stable/robust/well-tested and no reasonable install should be running without them.
This will let us simplify or remove some flags (like `metamta.send-immediately`) and simplify some other processes like search indexing.
Test Plan: Stopped daemons, loaded warnings, saw daemon warning. Started daemons, reloade, no warning.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7964
Summary: Ref T4310. Ref T3720. We use bare strings to refer to session types in several places right now; use constants instead.
Test Plan: grep; logged out; logged in; ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7963
Summary: Ref T4310. Ref T3720. Session operations are currently part of PhabricatorUser. This is more tightly coupled than needbe, and makes it difficult to establish login sessions for non-users. Move all the session management code to a `SessionEngine`.
Test Plan:
- Viewed sessions.
- Regenerated Conduit certificate.
- Verified Conduit sessions were destroyed.
- Logged out.
- Logged in.
- Ran conduit commands.
- Viewed sessions again.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7962
Summary: Adds the ability to set icons into Tags.
Test Plan: tested on UIExamples page.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7961
Summary: Ref T4310. Ref T3720. Partly, this makes it easier for users to understand login sessions. Partly, it makes it easier for me to make changes to login sessions for T4310 / T3720 without messing anything up.
Test Plan: {F101512}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3720, T4310
Differential Revision: https://secure.phabricator.com/D7954
Summary:
Ref T4310. This is a small step toward separating out the session code so we can establish sessions for `ExternalAccount` and not just `User`.
Also fix an issue with strict MySQL and un-admin / un-disable from web UI.
Test Plan: Logged in, logged out, admined/de-admin'd user, added email address, checked user log for all those events.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310
Differential Revision: https://secure.phabricator.com/D7953
Summary: Add the 'Depends On' field to releeph requests. This will help the release engineers to be aware of the dependencies and make sure pick them altogether.
Test Plan: Check sandbox. This field shows up when a revision has some dependencies.
Reviewers: JoelB, lifeihuang, epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7946
Summary: See IRC. This is a likely fix for @DctrWatson's error: we're returning `null` but should return `array()` to indicate no values.
Test Plan: Will make @DctrWatson do it.
Reviewers: btrahan
Reviewed By: btrahan
CC: dctrwatson, aran
Differential Revision: https://secure.phabricator.com/D7950
Summary: This might be `null`.
Test Plan: Loaded, got exception, applied patch, no exception. Viewed a method with an actual message too, that also worked.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7955
Summary: Ref T1344. We try to do a bad edge query with no sources right now if there are no tasks in a project.
Test Plan:
- Hit exception, applied patch, no exception.
- Other boards still have tasks.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7951
Summary:
Ref T1344. When rendering a task's projects, add "(Board)" afterward if the task is on a non-default board.
This is mostly a "get the data there" change, we can probably make the design nicer.
Test Plan: {F101232}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7945
Summary: Ref T1344. Write edges and read them when reloading the board.
Test Plan: After reload, stuff stays mostly where I put it. In-column order isn't always persisted correctly yet.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7944
Summary: Ref T1344. Makes requests to the server, which are received and ignored. Performs appropriate locking/unlocking/enabling/disabling on the client.
Test Plan: Dragged stuff around, saw it enable/disable/send correctly.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7943
Summary:
Ref T1344. Makes the UI/UX a little nicer; still no actual backend stuff. This changes:
- When you drop an item onto a different column, the item actually moves.
- Empty columns render with a special CSS class now, but no nodes in the list. This cleans up some JS jankiness. I made the "empty" columns have a light blue background for now. We could put some sort of subtle background image in them instead, or some kind of call to action if it's not redundant with other UI.
Test Plan: {F101208}
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7942
Summary:
Ref T1344. Allows you to drag tasks within a column and between columns, and handles all the multi-column state / targeting / ghosting stuff.
This is a UI-only change; you can't actually do anything meaningful with these yet.
Roughly, I added the idea of a DraggableList existing within a "group" of draggable lists. Normally, that group only has one item, but on boards it has all of the columns. Then I made all of the relevant operations just apply to the whole group of lists.
Test Plan:
- Verified existing funtionality in Maniphest and ApplicationSearch is unaffected, by dragging around tasks to reprioritize them and dragging around search items.
- Dragged tasks between columns on a board view.
{F101196}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7941
Summary:
Ref T2015. Several fixes:
- `checkForCancellation()` no longer exists, and isn't relevant for resumable stops. Throw it away for now.
- Fix an issue where a build could pass even if the final step failed.
- `phlog()` exceptions so they show up in `bin/harbormaster` and the daemon logs.
- Write an exception log if a step fails.
- Add a "throw an exception" step to debug this stuff more easily.
Test Plan:
- Grepped for `checkForCancellation()`.
- Ran a failing build where the final step caused the failure.
- Observed `phlog()` in `bin/harbormaster` output.
- Observed log in web UI:
{F101168}
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7935
Summary: Cleans up some older layouts to new stuffs.
Test Plan: Test with and without a diff ID.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7949
Summary:
Ref T1344. Autogenerates a "Backlog" column if one does not exist. Assigns all tasks to the backlog column.
For now, this column is always called "Backlog", but we could let it be called other things later.
Test Plan: Loaded a project, got a backlog column, created some columns.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7938
Summary: Ref T1344. Minor tweaks for crumb/link stuff -- @mikn has been doing some work here recently and I want to unblock him.
Test Plan: Viewed board; viewed column edit screen.
Reviewers: chad, btrahan
Reviewed By: chad
CC: mikn, aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7937
Summary: Made the edit path of the Edit controller work (before only create worked), also added in the link for the cog icon to actually land you on the edit page for the correct column. Some cleanup too. *cough*
Test Plan:
Click on gear
Look at fancy title you are about to edit
Change it
Enjoy changed title
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7933
Summary:
Fixes T4306. We should clear notifications about a question and its answers when viewing a question page.
(Eventually we might have an answer detail page and send the notification there, and then only clear there, but this cleans things up for now.)
Test Plan: Loaded question page, verified answers appeared as page objects.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4306
Differential Revision: https://secure.phabricator.com/D7928
Summary: This removes the bulk of the "Form Errors" text, some variations likely exists. These are a bit redundant and space consuming. I'd also like to back ErrorView more into PHUIObjectBox.
Test Plan: Test out the forms, see errors without the text.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran, hach-que
Differential Revision: https://secure.phabricator.com/D7924
Test Plan: Did searches in Diffusion using all 3 Hosted values
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7927
Summary: This adds in the create flow for the Project board columns on the super secret board page which totally doesn't do anything right now.
Test Plan:
1. Apply diff.
2. Go to super secret page.
3. Click link close to top with a way too long name.
4. Enter a name for the column.
5. Enjoy a new column briefly before realising you cannot remove it.
6. Stay happy!
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: tmaroschik, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7925
Summary: This also cleans up some code a little bit. Most of the gymnastics are to make sure we call `needProjectPHIDs()` appropriately.
Test Plan: Created new commit and revision rules with this field. Ran commits and revisions through the test console. Field behavior seemed correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, dctrwatson
Differential Revision: https://secure.phabricator.com/D7923
Summary: Ref T2015. Allow configuration of default edit/view policies for blueprints. Add create policy. Remove administrative exception in policies.
Test Plan: Configured these settings and created (or, with a restrictive create setting, tried to create) blueprints.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7921
Summary:
Ref T2015. Adds human-readable names to Drydock blueprints.
Also the new patches stuff is so much nicer.
Test Plan: Edited, created, and reviewed migrated blueprints.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7918
Summary:
Via Asana. The tags on Differential mail are wrong in two cases:
- Transactions which submit inline comments but no comment text are not labeled as "comments", but should be.
- Non-close, non-comment transactions are not labeled at all, but should be labeled "other".
Test Plan: Submitted a no-comments, inlines-only transaction and got a message with proper `X-Phabricator-Mail-Tags` header.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7912
Summary: Two basic changes here, first we fixed up the Diffusion headers to roll out more PHUIObjectBoxes. Second we added some specific styles for when Errors are inside an ObjectBox at the first position.
Test Plan: Tested a number of different layouts for browsing respositories as well as wherever I could find cases with PHUIObjectBox Form Errors (see images attached). Still some minor tightening due after this diff, but didnt want to overload it.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7914
Test Plan: Created comments with 'silent' both true and empty, received notifcation for only the latter.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7916
Summary: Minor, sets the list to flush to invoke the correct CSS for the ObjectBox.
Test Plan: Reload Page
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7909
Summary: Ref T2015. This workflow is a little weird (runs in a dialog, no edit-before-create step, lots of internal classnames). Make it a little more standard.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7908
Summary: Fixes T4290. At least one of the fields (`realname`) may have a list of items, and `strlen(array('first', 'last'))` produces the warning and stack trace in T4290.
Test Plan:
- Edited `realname` from an array value to an array value.
- Hit error.
- Applied patch.
- No more error.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4290
Differential Revision: https://secure.phabricator.com/D7905
Summary: use the loadReviewedBy function, which seems to do what we want -- returns a reviewer IFF the last thing was an accept
Test Plan: i believe in the power of loadReviewedBy
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, aarwine
Differential Revision: https://secure.phabricator.com/D7903
Summary: Ref T4289. Make it clear that this provider does not currently work with JIRA 5.
Test Plan: Viewed JIRA provider from `/auth/`, saw warnings.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4289
Differential Revision: https://secure.phabricator.com/D7906
Summary:
Updates table design to use new standards, work well in PHUIObjectBox. Fixes T4142
Comma
Test Plan: Tested on Diffusion, Settings, will roll out to more places soon
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Maniphest Tasks: T4142
Differential Revision: https://secure.phabricator.com/D7901
Summary: See github issue 413. This diff adds color to the commit view as the user expects *AND* adds green to both audit and commit views. I looked in the history (D6184) and I can't tell how expected green was, but it feels nice to me given differential color coding.
Test Plan: looked at lists of audits and commits with pretty colors.
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7900
Summary: Ref T1049. Creates convenience actions at the Buildable level to stop, resume, or restart all builds.
Test Plan:
- Stopped all builds.
- Resumed all builds.
- Restarted all builds.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7899
Summary:
Ref T1049. Improves the UI:
- Pending commands, like "stopping", are shown separately from the current status.
- Pending commands are shown on the list view.
- Builds can be restarted, stopped and resumed from the list view.
- Add a missing crumb.
Test Plan:
{F99022}
{F99023}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7898
Summary: Ref T1049. The logic in the BuildEngine is a little different from the logic on the Build itself. Make these more consistent, and make queued commands more private.
Test Plan: Restarted, stopped, and resumed a build.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7897
Summary:
Ref T1049. Currently you can cancel a build, but now that we're tracking a lot more state we can stop, resume, and restart builds.
When the user issues a command against a build, I'm writing it into an auxiliary queue (`HarbormasterBuildCommand`) and then reading them out in the worker. This is mostly to avoid race messes where we try to `save()` the object in multiple places: basically, the BuildEngine is the //only// thing that writes to Build objects, and it holds a lock while it does it.
Test Plan:
- Created a plan which runs "sleep 2" a bunch of times in a row.
- Stopped, resumed, and restarted it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7892
Summary:
Ref T1049. Currently, the Harbormaster worker looks like this:
foreach (step) {
run_step(step);
}
This means steps can't ever be run in parallel. Instead, split it into two workers. The "Build" worker starts things off, and basically does:
update_build();
(We could theoretically do this in the original process because it should never take very long, but since there's a lock and it's a little bit complex it seemed cleaner to separate it.)
The "Target" worker runs an individual target (like a command, or an HTTP request, or whatever), then updates the build:
run_one_step(step);
update_build();
The new `update_build()` mechanism in `HarbormasterBuildEngine` does this, roughly:
figure_out_overall_status_of_all_steps();
if (build is done) { done(); }
if (build is fail) { fail(); }
foreach (step that is ready to run) {
queue_target_worker_for_step(step);
}
So, overall:
- The part of the code that updates Builds is completely separated from the part of the code that updates Targets.
- Targets can run in parallel.
Test Plan:
- Ran a bunch of builds via `bin/harbormaster build`.
- Ran a bunch of builds via web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7890
Summary:
If you have private replies on and a Macro reply handler set, we try to access `getMailKey()` and fail. See P1039 for a trace.
(Thanks to @Korvin for picking this up.)
Test Plan: Set configuration, repro'd the exception, applied the patch, then disabled/enabled a macro.
Reviewers: btrahan
Reviewed By: btrahan
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7896
Summary: "Run" is clearer than "Apply". This has already been changed in Harbormaster itself.
Test Plan: used eyeballs
Reviewers: btrahan, zeeg
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7889
Summary:
Fixes T4276. This adds "Change is enormous" to pre-commit content rules so we can, e.g., just reject these and not worry about them elsewhere.
Also, use the same numeric limits across the mechanisms so there's a consistent definition of an "enormous" changeset.
Test Plan:
- Set enormous limit to 15 bytes, pushed some changes, got blocked by a rule.
- Set it back, pushed OK.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4276
Differential Revision: https://secure.phabricator.com/D7887
Summary:
pretty simple. did the bare minimum in the editor, etc. to be able to create an item from the conduit console.
I put the work in the editor for initializing new values, rather than some initializeNewItem method, mainly because Items don't have policy directly but instead policy will be defined by the queue(s) the item is in. The editor is definitely going to host this work, so it felt like it might be better to do it this way in time...? anyway, easy to make an initializeNew method instead if you want to have that paradigm going all the time.
Test Plan: made an item from teh conduit console - success. verified errors for missing data as well
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7879
Summary: if you rename a project in such a way that the old slug and the new slug are the same, there are errors when the phriction document is updated. detect this case and don't bother updating the document since there is no change. Fixes Github issue 474.
Test Plan: made a project "testTest". Viewed the wiki page. Created the wiki page. Renamed the project "TestTest". Before patch, this error'd, post patch it works!
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7888
Summary:
Ref T4276. When a change is larger than 2GB, PHP can not read the entire change into a string, so Herald can not process it.
Additionally, we already have a time limit for practical reasons, but it's huge (probably incorrectly). To deal with these things:
- Add an optional byte limit to `diffusion.rawdiffquery`.
- Make the query with a 1GB limit.
- Reduce the diff timeout from 15 hours to 15 minutes.
- Add a "Changeset is enormous" field. This field is true for changes which are too large to process.
This generally makes behaviors more sane:
- We'll always make progress in Herald in a reasonable amount of time.
- Installs can write global rules to handle (or reject) these types of changes.
Test Plan: Set limit to 25 bytes instead of 1GB and ran test console on various changes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4276
Differential Revision: https://secure.phabricator.com/D7885
Summary:
Fixes T4189. Ref T4151. Allows repositories to have additional custom hooks for operations which can't be expressed with Herald (one such operation is lint).
This adds only local hook directories, since they're easier to use with existing hooks than global directories. I might add global directories eventually.
This doesn't support Mercurial since we have no demand for it and it's more complicated (we lose compatibility and power by just dropping a `hooks.d/` somewhere).
Test Plan:
- Pulled hosted SVN and Git repos to verify the hook directories generate correctly.
- Added a variety of hooks to the hook directories (echo + pass, fail).
- Pushed commits and verified the hooks fired (output expected info, or failed).
- Verified push log reflected the correct error code ("3", external) and detail ("nope.sh") when rejecting.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4151, T4189
Differential Revision: https://secure.phabricator.com/D7884
Summary:
Fixes T4264. Adds:
- New "Repository's projects" field to Herald pre-commit rules, so you can write global rules which act based on projects.
- Allows pre-ref/pre-content rules to bind to projects, and fire for all repositories in that project, so users with limited power can write rules which apply to many repositories.
- The pre-ref and pre-content classes were starting to share a fair amount of code, so I made them both extend an abstract base class.
Test Plan: Wrote new pre-ref and pre-content rules bound to projects, then pushed commits into repositories in those projects and not in those projects. The "repository projects" field populated, and the rules fired for repositories in the relevant projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7883
Summary: Ref T4264. Ref T4262. Ref T2628. Ref T3190. To write Herald object rules which bind to a project, I want to take the low budget approach and have the user just type `#project` into a text field. Formally recognize `#project` as an object name, by moving all the existing stuff from the remarkup rule to the PHID type declaration.
Test Plan: Typed `#project` into jump nav and `phid.lookup` in Conduit. Typed `#project` into Remarkup.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3190, T4264, T2628, T4262
Differential Revision: https://secure.phabricator.com/D7882
Summary: Ref T4264. Ref T2628. Ref T3102. Allows you to associate repositories with projects. In the future, you'll be able to write Herald object rules against projects, use Herald fields like "Repository's projects", and search by project.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3102, T4264, T2628
Differential Revision: https://secure.phabricator.com/D7881
Summary:
~~Set PATH for repository's hook, so the environment.append-paths can used~~
repository's hook may can't find php path if user's profile like bash_profile is not loaded.
Test Plan: check the hook generated is contain the right path
Reviewers: epriestley, #blessed_reviewers
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7743
Summary:
Ref T4222. Currently, CelerityResourceResponse holds response resources in flat maps. Instead, specify which map resources appear in.
Also, provide `requireResource()` and `initBehavior()` APIs on the Controller and View base classes. These provide a cleaner abstraction over `require_celerity_resource()` and `Javelin::initBehavior()`, but are otherwise the same. Move a few callsites over.
Test Plan:
- Reloaded pages.
- Browsed around Differential.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7876
Summary:
Repositories currently have a no-UI "shortcut" feature which is only used by Facebook (and I'm not sure it's even used). As implemented, this feature is policy-oblivious and kind of nonsensical. Throw it away.
I'm open to reimplementing this, but I want to see some level of interest in it before I do. The new implementation would add shortcuts to each repository, similar to how mirrors work. My original plan was to follow this up with such an implementation (it's half-implemented in my sandbox), but as I worked through it I'm not sure it's really valuable.
Test Plan: Browsed repository list, grep.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Differential Revision: https://secure.phabricator.com/D7862
Summary: Ref T4222. This doesn't actually support multiple sources yet, but moves us closer by getting rid of some dead and exceedingly-singletoney code.
Test Plan: Browsed around, looked at Phame blogs.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7874
Summary:
Ref T4222. This fixes some issues with Phame's resource construction.
Phame requires a fully virtual resource source, and since I want to run wordpress templates unmodified some day I don't want to build resource maps for skins.
Move all the stuff that depends on resource lists being discoverable at build time to `CelerityPhysicalResources`, and only generate maps for subclasses.
The root `CelerityResources` can now construct virtual resources; construct a virtual resource for Phame and use it.
Test Plan: Off-domain blogs work correctly now. On-domain blogs with custom skins work correctly now.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7873
Summary:
Ref T4222.
- Removes the old map and changes the CelerityResourceMap API to be entirely driven by the new map.
- The new map is about 50% smaller and organized more sensibly.
- This removes the `/pkg/` URI component. All resources are now required to have unique names, so we can tell if a resource is a package or not by looking at the name.
- Removes some junky old APIs.
- Cleans up some other APIs.
- Added some feedback for `bin/celerity map`.
- `CelerityResourceMap` is still a singleton which is inextricably bound to the Phabricator map; this will change in the future.
Test Plan:
- Reloaded pages.
- Verified packaging works by looking at generated includes.
- Forced minification on and verified it worked.
- Forced no-timestamps on and verified it worked.
- Rebuilt map.
- Ran old script and verified error message.
- Checked logs.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: chad, aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7872
Summary: Ref T4222. These are the last two "return a big ball of mud" methods. Make the API stronger so I can swap out the implementations.
Test Plan: Reloaded pages.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7871
Summary: Ref T4222. Same deal as D7867, but for this other super nebulous "return a blob of stuff" method.
Test Plan: Regenerated map, browsed around, etc.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7868
Summary: Ref T4222. This was used by Facebook while developing Releeph, but should no longer be necessary since Releeph is in the upstream. I can't get an answer out of Facebook about whether they still use it or not (see T4227), so nuke it. We're going to replace it with a more general mechanism (see T4222).
Test Plan: Regenerated celerity map. Browsed some pages, still got resources.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7863
Summary: This removes the people box and adds a members property list item it's place. We may want some show/hide/see all if a project has more than //n// members, but these seems more reasonable than previous layout.
Test Plan: Tested a project with and without members, grepped for removed CSS, and tested mobile and desktop layouts.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7870
Summary: SInce we added the background color, no need to add extra padding for ObjectItemList.
Test Plan: reload a project page, no white padding in object box.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7866
Summary: Currently we markup `rXabcd`, but not `rX` on its own. Mark these up as repository object names.
Test Plan: Typed `rPOEMS`, `rPOEMS1`, `rPOEMS139893189`, etc.
Reviewers: btrahan, dctrwatson
Reviewed By: btrahan
CC: aran, poop
Differential Revision: https://secure.phabricator.com/D7859
Summary: Ref T4136. After Passphrase, user policies work correctly in this dropdown. Providing this option improves consistency and makes it easier to create, e.g., a private repository (where "no one" does not include the viewer, because they don't own the resulting object).
Test Plan: Set an object's policy to my user policy.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4136
Differential Revision: https://secure.phabricator.com/D7858
Summary:
Fixes T4242. It's currently possible to set nonsense defaults and create repositories with unintended policies, because policy configuration isn't part of creation. Instead:
- put a policy page into the creation workflow;
- require the selection of valid policies (i.e., prevent creating a repository you can't view / edit).
Test Plan:
- Created imported and hosted repositories, hit policy selection.
- Edited policies of existing repositories.
- Tried to set nonsense policies.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4242
Differential Revision: https://secure.phabricator.com/D7856
Summary:
Ref T4264. Allows you to create "Object" rules, in addition to Global and Personal rules. If you choose to create an Object rule, you'll be prompted to select an object on a new screen. You must be able to edit and object in order to create rules for it.
Ref T3506. This makes "All" the default filter for the transcript view, which should reduce confusion on smaller installs.
Test Plan:
- Created non-object rules.
- Created object rules.
- Triggered object rules against matching and unmatching objects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3506, T4264
Differential Revision: https://secure.phabricator.com/D7853
Summary: Ref T4264. Lays the groundwork for new "Object" rule types. Prevents personal "Hook" rules, which don't make any sense.
Test Plan: Created new Maniphest (global/personal available) and Ref Hook (global only) rules.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7852
Summary:
If the repo isn't bare, than we need copy it's remote instead of using it.
This will probably not work if an SSH key is provided to phabricator, and in any case you must delete
all workspaces that were already created.
This will make landing those repos slower; I plan to just delete and re-clone all repos on my instance.
It will probably be simpler to just make a bare-repo a requirement of all the git-landing work.
Test Plan: landed from hosted and un-hosted repos, checked git-remote url in each newly cloned workspace.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7592
Summary: Some discussion on IRC. This is more consistent with other disabled items, which are click-to-explain.
Test Plan: Viewed UI, clicked link.
Reviewers: btrahan, dctrwatson, asherkin
Reviewed By: asherkin
CC: aran
Differential Revision: https://secure.phabricator.com/D7857
Summary:
Fixes T4270. When you download raw file content, diffs, and patches we currently give them default (all users) visibility.
Instead, bind them to the repository or revision in question.
(This code could use a bit of cleanup at some point.)
Test Plan: Hit the patch and content download links in Diffusion and the patch download link in Differential, got restricted files with accurate policy bindings.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4270
Differential Revision: https://secure.phabricator.com/D7849
Summary:
Ref T4264. This gets most of the plumbing in for "object" rules, which will bind to a specific object, like a repository or project.
It does not yet let you actually create these rules.
Test Plan: Ran `storage upgrade`, created/edited rules, browsed Herald.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7847
Summary: Ref T4264. Instead of a dropdown, make this step more informative.
Test Plan: {F93928}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7846
Summary:
Ref T4264. Currently, you choose a rule's content type (revision, commit, hook) and rule type (global, personal) on the same screen.
- I want to make some rule types unavailable for some content types (e.g., personal hooks make little sense).
- I want to make content type selection use a radio control instead of a dropdown, so it can explain what the content types do in more detail.
- For new "object" hooks, I want to add a third step where you'll pick an object to bind to.
Split rule creation out into two steps. I think this won't get complicated enough for `PHUIPagedFormView`, but maybe I'll swap it in if this gets messier than I think.
Test Plan: Created some Herald rules, used back/cancel/etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7845
Summary: If `0` isn't an ancestor of the current branch, the `0::x` construction fails. This is uncommon, but not wildly unreasonable. The `ancestors()` construction is simpler anyway.
Test Plan: Viewed some `hg` repos locally (change history, file history) without anything suspicious cropping up.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7844
Summary:
Ref T4195. A legitimate rule which needs this field is "do not allow commits as root". Interestingly, we have exactly one commit as root in each Phabricator, Arcanist and libphutil.
Since the committer and author don't need to be Phabricator accounts (just the Pusher), the existing "Committer" and "Author" fields can't express this rule (they'll be empty).
Test Plan: {F93406}
Reviewers: btrahan
Reviewed By: btrahan
CC: SEJeff, aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7841
Summary:
Ref T2015. Not directly related to Drydock, but I bumped into this. All these scripts currently enumerate their workflows explicitly.
Instead, use `PhutilSymbolLoader` to automatically discover workflows. This reduces code duplication and errors (see all the bad `extends` this diff fixes) and lets third parties add new workflows (not clearly valuable?).
Test Plan: Ran `bin/x help` for each modified script.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7840
Summary:
Ref T2015. Not directly related to Drydock, but I've wanted to do this for a bit.
Introduce a common base class for all the workflows in the scripts in `bin/*`. This slightly reduces code duplication by moving `isExecutable()` to the base, but also provides `getViewer()`. This is a little nicer than `PhabricatorUser::getOmnipotentUser()` and gives us a layer of indirection if we ever want to introduce more general viewer mechanisms in scripts.
Test Plan: Lint; ran some of the scripts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7838
Summary: Ref T2015. All the Drydock query classes share the application method; move it into a shared base class to slightly shrink the codebase.
Test Plan: Browsed query UIs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7837
Summary:
Ref T2015. Moves a bunch of raw object loads into modern policy-aware queries.
Also straightens out the Log and Lease policies a little bit: there are legitimate states where these objects are not attached to a resource (particularly, while a lease is being acquired). Handle these more gracefully.
Test Plan: Lint / browsed stuff.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7836
Summary:
Ref T2015. Currently, Drydock has a `wait-for-lease` workflow which is invoked in the background by the `lease` workflow.
The goal of this mechanism is to allow `bin/drydock lease` to print out logs as the lease is acquired. However, this predates the `runAllTasksInProcess` flags, and they provide a simpler and more robust way (potentially with `--trace` and `PhutilConsole`) to do synchronous execution and debug logging.
Simplify this whole mechanism: just run everything in-process in `bin/drydock lease`, and do logging via `--trace`. We could thread a `PhutilConsole` through things too, but this seems good enough for now.
Also various cleanup/etc.
Test Plan: Ran `bin/drydock lease`. Ran `bin/harbormaster build X --plan Y`, for `Y` being a Drydock-dependent build plan.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7835
Summary: Ref T4266. This implements rules similar to the old rules. With D7842, maybe this is reasonable? I think it's not like grotesquely bad, at least.
Test Plan: See screenshot.
Reviewers: chad, wrotte
Reviewed By: chad
CC: aran
Maniphest Tasks: T4266
Differential Revision: https://secure.phabricator.com/D7843
Summary:
Ref T2015. After introducing ApplicationSearch, the left nav turned into a soupy mess. Split the major sections into four separate areas, and unify them with a simple console.
This also reverts all the prefix stuff, since the results were awful and I don't anticipate it ever being the best solution to any UX problem.
Test Plan:
Browsed blueprints, resources, leases and logs.
Here's the new console:
{F93279}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7833
