Summary:
Fixes T4306. We should clear notifications about a question and its answers when viewing a question page.
(Eventually we might have an answer detail page and send the notification there, and then only clear there, but this cleans things up for now.)
Test Plan: Loaded question page, verified answers appeared as page objects.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4306
Differential Revision: https://secure.phabricator.com/D7928
Summary: This removes the bulk of the "Form Errors" text, some variations likely exists. These are a bit redundant and space consuming. I'd also like to back ErrorView more into PHUIObjectBox.
Test Plan: Test out the forms, see errors without the text.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran, hach-que
Differential Revision: https://secure.phabricator.com/D7924
Test Plan: Did searches in Diffusion using all 3 Hosted values
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7927
Summary: This adds in the create flow for the Project board columns on the super secret board page which totally doesn't do anything right now.
Test Plan:
1. Apply diff.
2. Go to super secret page.
3. Click link close to top with a way too long name.
4. Enter a name for the column.
5. Enjoy a new column briefly before realising you cannot remove it.
6. Stay happy!
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: tmaroschik, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7925
Summary: This also cleans up some code a little bit. Most of the gymnastics are to make sure we call `needProjectPHIDs()` appropriately.
Test Plan: Created new commit and revision rules with this field. Ran commits and revisions through the test console. Field behavior seemed correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, dctrwatson
Differential Revision: https://secure.phabricator.com/D7923
Summary: Ref T2015. Allow configuration of default edit/view policies for blueprints. Add create policy. Remove administrative exception in policies.
Test Plan: Configured these settings and created (or, with a restrictive create setting, tried to create) blueprints.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7921
Summary:
Ref T2015. Adds human-readable names to Drydock blueprints.
Also the new patches stuff is so much nicer.
Test Plan: Edited, created, and reviewed migrated blueprints.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7918
Summary:
Via Asana. The tags on Differential mail are wrong in two cases:
- Transactions which submit inline comments but no comment text are not labeled as "comments", but should be.
- Non-close, non-comment transactions are not labeled at all, but should be labeled "other".
Test Plan: Submitted a no-comments, inlines-only transaction and got a message with proper `X-Phabricator-Mail-Tags` header.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7912
Summary:
Phabricator was going to give me an error message via commit_hook.php, unfortunately said error wasn't being set since
\$callsign was undefined. So, just changed \$callsign to \$argv[1] and now I get the appropriate commit.
Test Plan:
1. Add commit_hook.php to an SVN pre-commit.
2. Set the SVN to be hosted off of Phabricator.
3. Attempt to commit to commit to SVN repository.
Expected: Error message saying that the repository isn't hosted on Phabricator
Results: Error message saying undefined function.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7920
Summary: Two basic changes here, first we fixed up the Diffusion headers to roll out more PHUIObjectBoxes. Second we added some specific styles for when Errors are inside an ObjectBox at the first position.
Test Plan: Tested a number of different layouts for browsing respositories as well as wherever I could find cases with PHUIObjectBox Form Errors (see images attached). Still some minor tightening due after this diff, but didnt want to overload it.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7914
Test Plan: Created comments with 'silent' both true and empty, received notifcation for only the latter.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7916
Summary: Minor, sets the list to flush to invoke the correct CSS for the ObjectBox.
Test Plan: Reload Page
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7909
Summary: Test flight on Phabricator editing! I mostly looked at other code, thought it was well written and wrote my own code in the other code's image.
Test Plan: Look at icons appearing!
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7911
Summary: Ref T2015. This workflow is a little weird (runs in a dialog, no edit-before-create step, lots of internal classnames). Make it a little more standard.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7908
Summary: Fixes T4290. At least one of the fields (`realname`) may have a list of items, and `strlen(array('first', 'last'))` produces the warning and stack trace in T4290.
Test Plan:
- Edited `realname` from an array value to an array value.
- Hit error.
- Applied patch.
- No more error.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4290
Differential Revision: https://secure.phabricator.com/D7905
Summary: use the loadReviewedBy function, which seems to do what we want -- returns a reviewer IFF the last thing was an accept
Test Plan: i believe in the power of loadReviewedBy
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, aarwine
Differential Revision: https://secure.phabricator.com/D7903
Summary: Ref T4289. Make it clear that this provider does not currently work with JIRA 5.
Test Plan: Viewed JIRA provider from `/auth/`, saw warnings.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4289
Differential Revision: https://secure.phabricator.com/D7906
Summary:
Updates table design to use new standards, work well in PHUIObjectBox. Fixes T4142
Comma
Test Plan: Tested on Diffusion, Settings, will roll out to more places soon
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Maniphest Tasks: T4142
Differential Revision: https://secure.phabricator.com/D7901
Summary: See github issue 413. This diff adds color to the commit view as the user expects *AND* adds green to both audit and commit views. I looked in the history (D6184) and I can't tell how expected green was, but it feels nice to me given differential color coding.
Test Plan: looked at lists of audits and commits with pretty colors.
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7900
Summary: Ref T1049. Creates convenience actions at the Buildable level to stop, resume, or restart all builds.
Test Plan:
- Stopped all builds.
- Resumed all builds.
- Restarted all builds.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7899
Summary:
Ref T1049. Improves the UI:
- Pending commands, like "stopping", are shown separately from the current status.
- Pending commands are shown on the list view.
- Builds can be restarted, stopped and resumed from the list view.
- Add a missing crumb.
Test Plan:
{F99022}
{F99023}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7898
Summary: Ref T1049. The logic in the BuildEngine is a little different from the logic on the Build itself. Make these more consistent, and make queued commands more private.
Test Plan: Restarted, stopped, and resumed a build.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7897
Summary:
Ref T1049. Currently you can cancel a build, but now that we're tracking a lot more state we can stop, resume, and restart builds.
When the user issues a command against a build, I'm writing it into an auxiliary queue (`HarbormasterBuildCommand`) and then reading them out in the worker. This is mostly to avoid race messes where we try to `save()` the object in multiple places: basically, the BuildEngine is the //only// thing that writes to Build objects, and it holds a lock while it does it.
Test Plan:
- Created a plan which runs "sleep 2" a bunch of times in a row.
- Stopped, resumed, and restarted it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7892
Summary:
Ref T1049. Currently, the Harbormaster worker looks like this:
foreach (step) {
run_step(step);
}
This means steps can't ever be run in parallel. Instead, split it into two workers. The "Build" worker starts things off, and basically does:
update_build();
(We could theoretically do this in the original process because it should never take very long, but since there's a lock and it's a little bit complex it seemed cleaner to separate it.)
The "Target" worker runs an individual target (like a command, or an HTTP request, or whatever), then updates the build:
run_one_step(step);
update_build();
The new `update_build()` mechanism in `HarbormasterBuildEngine` does this, roughly:
figure_out_overall_status_of_all_steps();
if (build is done) { done(); }
if (build is fail) { fail(); }
foreach (step that is ready to run) {
queue_target_worker_for_step(step);
}
So, overall:
- The part of the code that updates Builds is completely separated from the part of the code that updates Targets.
- Targets can run in parallel.
Test Plan:
- Ran a bunch of builds via `bin/harbormaster build`.
- Ran a bunch of builds via web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7890
Summary:
If you have private replies on and a Macro reply handler set, we try to access `getMailKey()` and fail. See P1039 for a trace.
(Thanks to @Korvin for picking this up.)
Test Plan: Set configuration, repro'd the exception, applied the patch, then disabled/enabled a macro.
Reviewers: btrahan
Reviewed By: btrahan
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7896
Summary:
Currently, to add new migration patches you need to:
- Add a file to `resources/sql/patches/`; then
- add an entry to `src/infrastructure/storage/blahblah/BlahBlahBlah.php`.
The second step isn't actually necessary, and we've been using this system for a long time without any issues arising.
Instead of requiring manual adjustments to the patch list, infer the patch specifications from the files on disk so you don't need to do step 2.
Also, simplify the existing data, which can //mostly// be derived from patch names. There are a few exceptions/errors, noted inline, which are preserved for compatibility.
Test Plan:
- For the new genration of `name` and `type`, I added code to check that the old and new values were the same before converting. This caught the two inline exceptions ("emailtableport", "drydockresouces").
- Added new patches to `autopatches/` and ran `bin/storage status` to verify they got picked up correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7894
Summary: This one CSS file has a pre-transformed URI in it, just use a raw resource name. The tranform pipeline will fix it (and this URI is no longer correct).
Test Plan: Loaded some pages.
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7895
Summary: "Run" is clearer than "Apply". This has already been changed in Harbormaster itself.
Test Plan: used eyeballs
Reviewers: btrahan, zeeg
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7889
Summary:
Fixes T4276. This adds "Change is enormous" to pre-commit content rules so we can, e.g., just reject these and not worry about them elsewhere.
Also, use the same numeric limits across the mechanisms so there's a consistent definition of an "enormous" changeset.
Test Plan:
- Set enormous limit to 15 bytes, pushed some changes, got blocked by a rule.
- Set it back, pushed OK.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4276
Differential Revision: https://secure.phabricator.com/D7887
Summary:
pretty simple. did the bare minimum in the editor, etc. to be able to create an item from the conduit console.
I put the work in the editor for initializing new values, rather than some initializeNewItem method, mainly because Items don't have policy directly but instead policy will be defined by the queue(s) the item is in. The editor is definitely going to host this work, so it felt like it might be better to do it this way in time...? anyway, easy to make an initializeNew method instead if you want to have that paradigm going all the time.
Test Plan: made an item from teh conduit console - success. verified errors for missing data as well
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7879
Summary: if you rename a project in such a way that the old slug and the new slug are the same, there are errors when the phriction document is updated. detect this case and don't bother updating the document since there is no change. Fixes Github issue 474.
Test Plan: made a project "testTest". Viewed the wiki page. Created the wiki page. Renamed the project "TestTest". Before patch, this error'd, post patch it works!
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7888
Summary:
Ref T4276. When a change is larger than 2GB, PHP can not read the entire change into a string, so Herald can not process it.
Additionally, we already have a time limit for practical reasons, but it's huge (probably incorrectly). To deal with these things:
- Add an optional byte limit to `diffusion.rawdiffquery`.
- Make the query with a 1GB limit.
- Reduce the diff timeout from 15 hours to 15 minutes.
- Add a "Changeset is enormous" field. This field is true for changes which are too large to process.
This generally makes behaviors more sane:
- We'll always make progress in Herald in a reasonable amount of time.
- Installs can write global rules to handle (or reject) these types of changes.
Test Plan: Set limit to 25 bytes instead of 1GB and ran test console on various changes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4276
Differential Revision: https://secure.phabricator.com/D7885
Summary:
Fixes T4189. Ref T4151. Allows repositories to have additional custom hooks for operations which can't be expressed with Herald (one such operation is lint).
This adds only local hook directories, since they're easier to use with existing hooks than global directories. I might add global directories eventually.
This doesn't support Mercurial since we have no demand for it and it's more complicated (we lose compatibility and power by just dropping a `hooks.d/` somewhere).
Test Plan:
- Pulled hosted SVN and Git repos to verify the hook directories generate correctly.
- Added a variety of hooks to the hook directories (echo + pass, fail).
- Pushed commits and verified the hooks fired (output expected info, or failed).
- Verified push log reflected the correct error code ("3", external) and detail ("nope.sh") when rejecting.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4151, T4189
Differential Revision: https://secure.phabricator.com/D7884
Summary:
Fixes T4264. Adds:
- New "Repository's projects" field to Herald pre-commit rules, so you can write global rules which act based on projects.
- Allows pre-ref/pre-content rules to bind to projects, and fire for all repositories in that project, so users with limited power can write rules which apply to many repositories.
- The pre-ref and pre-content classes were starting to share a fair amount of code, so I made them both extend an abstract base class.
Test Plan: Wrote new pre-ref and pre-content rules bound to projects, then pushed commits into repositories in those projects and not in those projects. The "repository projects" field populated, and the rules fired for repositories in the relevant projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7883
Summary: Ref T4264. Ref T4262. Ref T2628. Ref T3190. To write Herald object rules which bind to a project, I want to take the low budget approach and have the user just type `#project` into a text field. Formally recognize `#project` as an object name, by moving all the existing stuff from the remarkup rule to the PHID type declaration.
Test Plan: Typed `#project` into jump nav and `phid.lookup` in Conduit. Typed `#project` into Remarkup.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3190, T4264, T2628, T4262
Differential Revision: https://secure.phabricator.com/D7882
Summary: Ref T4264. Ref T2628. Ref T3102. Allows you to associate repositories with projects. In the future, you'll be able to write Herald object rules against projects, use Herald fields like "Repository's projects", and search by project.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3102, T4264, T2628
Differential Revision: https://secure.phabricator.com/D7881
Summary:
~~Set PATH for repository's hook, so the environment.append-paths can used~~
repository's hook may can't find php path if user's profile like bash_profile is not loaded.
Test Plan: check the hook generated is contain the right path
Reviewers: epriestley, #blessed_reviewers
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7743
Summary: Ref T4222. Adds the map name to Celerity resource URIs, so we can serve out of any map.
Test Plan: Poked around, verified URIs have "/phabricator/" in them now.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7877
Summary:
Ref T4222. Currently, CelerityResourceResponse holds response resources in flat maps. Instead, specify which map resources appear in.
Also, provide `requireResource()` and `initBehavior()` APIs on the Controller and View base classes. These provide a cleaner abstraction over `require_celerity_resource()` and `Javelin::initBehavior()`, but are otherwise the same. Move a few callsites over.
Test Plan:
- Reloaded pages.
- Browsed around Differential.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7876
Summary:
Repositories currently have a no-UI "shortcut" feature which is only used by Facebook (and I'm not sure it's even used). As implemented, this feature is policy-oblivious and kind of nonsensical. Throw it away.
I'm open to reimplementing this, but I want to see some level of interest in it before I do. The new implementation would add shortcuts to each repository, similar to how mirrors work. My original plan was to follow this up with such an implementation (it's half-implemented in my sandbox), but as I worked through it I'm not sure it's really valuable.
Test Plan: Browsed repository list, grep.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Differential Revision: https://secure.phabricator.com/D7862
Summary:
Good news. Starting with Ubuntu 13.10, Phabricator can legally be used by evil dictators, mad scientists, and toxic derivative creators.
The JSON implementation prohibiting evil (http://www.phoronix.com/scan.php?page=news_item&px=MTQ0MTY) was ripped out and replaced by the Evil-friendly PHP license: https://github.com/remicollet/pecl-json-c/blob/master/LICENSE
Test Plan: ran the shell script, Phabricator no longer fails with "Call to undefined function json_decode".
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7878
Summary:
Ref T4222. Earlier, I adjusted the root from `webroot/` to `webroot/rsrc/`. However, this means that all the `/rsrc/x/y/z.jpg` fragments in CSS are no longer recognized as resource names.
Since we have like 9,000 things in CSS that do `url(/rsrc/xyz.jpg)` and I don't want to fix/test them all, so just make them work as-is. There's no real reason either setting is better than the other.
(Both URLs also work fine, but the parsed one will be better once we have real CDN support.)
Test Plan: Verified CSS gets managed resource URIs transformed into it.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7875
Summary: Ref T4222. This doesn't actually support multiple sources yet, but moves us closer by getting rid of some dead and exceedingly-singletoney code.
Test Plan: Browsed around, looked at Phame blogs.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7874
Summary:
Ref T4222. This fixes some issues with Phame's resource construction.
Phame requires a fully virtual resource source, and since I want to run wordpress templates unmodified some day I don't want to build resource maps for skins.
Move all the stuff that depends on resource lists being discoverable at build time to `CelerityPhysicalResources`, and only generate maps for subclasses.
The root `CelerityResources` can now construct virtual resources; construct a virtual resource for Phame and use it.
Test Plan: Off-domain blogs work correctly now. On-domain blogs with custom skins work correctly now.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7873
Summary:
Ref T4222.
- Removes the old map and changes the CelerityResourceMap API to be entirely driven by the new map.
- The new map is about 50% smaller and organized more sensibly.
- This removes the `/pkg/` URI component. All resources are now required to have unique names, so we can tell if a resource is a package or not by looking at the name.
- Removes some junky old APIs.
- Cleans up some other APIs.
- Added some feedback for `bin/celerity map`.
- `CelerityResourceMap` is still a singleton which is inextricably bound to the Phabricator map; this will change in the future.
Test Plan:
- Reloaded pages.
- Verified packaging works by looking at generated includes.
- Forced minification on and verified it worked.
- Forced no-timestamps on and verified it worked.
- Rebuilt map.
- Ran old script and verified error message.
- Checked logs.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: chad, aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7872
