Summary:
See PHI309. There is a window of time between when all builds pass and when Harbormaster actually publishes a revision out of draft.
If any other user tries to interact with the revision during that window, they'll pick up the undraft transaction as a side effect. However, they won't have permission to apply it and will be stopped by a validation error.
Instead, only automatically publish a revision if the actor is the revision author or some system/application user (essentially always Harbormaster).
Test Plan:
- Added a `echo ...; sleep(30);` to `HarbormasterBuildEngine->updateBuildable()` before the `applyTransactions()` at the bottom.
- Wrote an "Always, run an HTTP request" Herald rule and Harbormaster build plan.
- Ran daemons with `bin/phd debug task`.
- Created a new revision with `arc diff`, as user A.
- Waited for `phd` to enter the race window.
- In a separate browser, as user B, submitted a comment via `differential.revision.edit`.
- Before patch: edits during the race window were rejected with a validation error, "you don't have permission to request review".
- After patch: edits go through cleanly.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18921
Summary: Depends on D18917. Ref T13046. While I'm in here, update this to use more modern construction.
Test Plan: Browed and queried for push logs.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18918
Summary:
Depends on D18915. Ref T13046.
- Distinguish between HTTP and HTTPS.
- Use more constants and fewer magical strings.
- For HTTP responses, give them better type information and more helpful UI behaviors.
Test Plan: Pulled over SSH and HTTP. Reviewed resulting logs from the web UI. Hit errors like missing/invalid credentials.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18917
Summary: Depends on D18914. Updates this Query to use slightly more modern construction while I'm working in adjacent code.
Test Plan: Viewed push logs in web UI.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18915
Summary:
Depends on D18912. Ref T13046. Add a UI to browse the existing pull log table.
The actual log still has some significant flaws, but get the basics working.
Test Plan: {F5391909}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18914
Summary:
See PHI305. Ref T13046.
The SSH workflows currently extend `PhabricatorManagementWorkflow` to benefit from sharing all the standard argument parsing code. Sharing the parsing code is good, but it also means they inherit a `getViewer()` method which returns the ommnipotent viewer.
This is appropriate for everything else which extends `ManagementWorkflow` (like `bin/storage`, `bin/auth`, etc.) but not appropriate for SSH workflows, which have a real user.
This caused a bug with the pull logs where `pullerPHID` was not recorded properly. We used `$this->getViewer()->getPHID()` but the correct code was `$this->getUser()->getPHID()`.
To harden this against future mistakes:
- Don't extend `ManagementWorkflow`. Extend `PhutilArgumentWorkflow` instead. We **only** want the argument parsing code.
- Rename `get/setUser()` to `get/setSSHUser()` to make them explicit.
Then, fix the pull log bug by calling `getSSHUser()` instead of `getViewer()`.
Test Plan:
- Pulled and pushed to a repository over SSH.
- Grepped all the SSH stuff for the altered symbols.
- Saw pulls record a valid `pullerPHID` in the pull log.
- Used `echo {} | ssh ... conduit conduit.ping` to test conduit over SSH.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18912
Summary: Depends on D18910. Ref T13043. Provides reasonable user-facing documentation about the general role and utility of this tool.
Test Plan: Read document.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18911
Summary:
Depends on D18908. Ref T13043. Allow users to get information about what revokers do with a new `--list` flag.
You can use `--list --type <key>` to get information about a specfic revoker.
Test Plan: Ran `bin/auth revoke --list`, saw a list of revokers with useful information.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18910
Summary:
Depends on D18907. Ref T13043. Ref T12509. We have some weird old password digest behavior that isn't terribly concerning, but also isn't great.
Specifically, old passwords were digested in weird ways before being hashed. Notably, account passwords were digested with usernames, so your password stops working if your username is chagned. Not the end of the world, but silly.
Mark all existing hashes as "v1", and automatically upgrade then when they're used or changed. Some day, far in the future, we could stop supporting these legacy digests and delete the code and passwords and just issue upgrade advice ("Passwords which haven't been used in more than two years no longer work."). But at least get things on a path toward sane, modern behavior.
Test Plan: Ran migration. Spot-checked that everthing in the database got marked as "v1". Used an existing password to login successfully. Verified that it was upgraded to a `null` (modern) digest. Logged in with it again.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043, T12509
Differential Revision: https://secure.phabricator.com/D18908
Summary:
Depends on D18906. Ref T13043. When SSH keys are edited, we normally include a warning that if you don't recognize the activity you might have problems in the mail body.
Currently, this warning is also shown for revocations with `bin/auth revoke --type ssh`. However, these revocations are safe (revocations are generally not dangerous anyway) and almost certainly legitimate and administrative, so don't warn users about them.
Test Plan:
- Created and revoked a key.
- Creation mail still had warning; revocation mail no longer did.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18907
Summary:
Depends on D18904. Ref T13043. If an attacker compromises a victim's session and bypasses their MFA, they can try to guess the user's current account password by making repeated requests to change it: if they guess the right "Old Password", they get a different error than if they don't.
I don't think this is really a very serious concern (the attacker already got a session and MFA, if configured, somehow; many installs don't use passwords anyway) but we get occasional reports about it from HackerOne. Technically, it's better policy to rate limit it, and this should reduce the reports we receive.
Test Plan: Tried to change password over and over again, eventually got rated limited. Used `bin/auth unlimit` to clear the limit, changed password normally without issues.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18906
Summary:
Ref T13043. After D18903, this data has migrated to shared infrastructure and has no remaining readers or writers.
Just delete it now, since the cost of a mistake here is very small (users need to "Forgot Password?" and pick a new password).
Test Plan: Grepped for `passwordHash`, `passwordSalt`, and variations.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18904
Summary:
Ref T13043. This moves user account passwords to the new shared infrastructure.
There's a lot of code changes here, but essentially all of it is the same as the VCS password logic in D18898.
Test Plan:
- Ran migration.
- Spot checked table for general sanity.
- Logged in with an existing password.
- Hit all error conditions on "change password", "set password", "register new account" flows.
- Verified that changing password logs out other sessions.
- Verified that revoked passwords of a different type can't be selected.
- Changed passwords a bunch.
- Verified that salt regenerates properly after password change.
- Tried to login with the wrong password, which didn't work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18903
Summary:
Ref T13045. See that task for discussion.
This replaces `digestForIndex()` with a "clever" algorithm in `digestForAnchor()`. The new digest is the same as `digestForIndex()` except when the original output was "." or "_". In those cases, a replacement character is selected based on entropy accumulated by the digest function as it iterates through the string.
Test Plan: Added unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13045
Differential Revision: https://secure.phabricator.com/D18909
Summary:
Ref T13043. We have ~4 copies of this logic (registration, lost password recovery, set password, set VCS password).
Currently it varies a bit from case to case, but since it's all going to be basically identical once account passwords swap to the new infrastructure, bring it into the Engine so it can live in one place.
This also fixes VCS passwords not being affected by `account.minimum-password-length`.
Test Plan: Hit all errors in "VCS Password" panel. Successfully changed password.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18902
Summary:
Ref T13043. This cleans some things up to prepare for moving account passwords to shared infrastructure.
Currently, the (very old, fairly unusual) `bin/accountadmin` tool can set account passwords. This is a bit weird, generally not great, and makes upgrading to shared infrastructure more difficult. Just get rid of this to simplify things. Many installs don't have passwords and this is pointless and unhelpful in those cases.
Instead, let `bin/auth recover` recover any account, not just administrator accounts. This was a guardrail against administrative abuse, but it has always seemed especially flimsy (since anyone who can run the tool can easily comment out the checks) and I use this tool in cluster support with some frequency, occasionally just commenting out the checks. This is generally a better solution than actually setting a password on accounts anyway. Just get rid of the check and give users enough rope to shoot themselves in the foot with if they truly desire.
Test Plan:
- Ran `bin/accountadmin`, didn't get prompted to swap passwords anymore.
- Ran `bin/auth recover` to recover a non-admin account.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18901
Summary:
Ref T13043. In D18898 I moved VCS passwords to the new shared infrastructure.
Before account passwords can move, we need to make two changes:
- For legacy reasons, VCS passwords and Account passwords have different "digest" algorithms. Both are more complicated than they should be, but we can't easily fix it without breaking existing passwords. Add a `PasswordHashInterface` so that objects which can have passwords hashes can implement custom digest logic for each password type.
- Account passwords have a dedicated external salt (`PhabricatorUser->passwordSalt`). This is a generally reasonable thing to support (since not all hashers are self-salting) and we need to keep it around so existing passwords still work. Add salt support to `AuthPassword` and make it generate/regenerate when passwords are updated.
Then add a nice story about password digestion.
Test Plan: Ran migrations. Used an existing VCS password; changed VCS password. Tried to use a revoked password. Unit tests still pass. Grepped for callers to legacy `PhabricatorHash::digestPassword()`, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18900
Summary:
Ref T13043. After D18898, this has been migrated to new, more modern storage and no longer has any readers or writers.
One migration from long ago (early 2014) is affected. Since this is ancient and the cost of dropping this is small (see inline), I just dropped it.
I'll note this in the changelog.
Test Plan: Ran migrations, got a clean bill of health from `storage status`. Grepped for removed symbol.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18899
Summary:
Ref T13043. Migrate VCS passwords away from their dedicated table to new the new shared infrastructure.
Future changes will migrate account passwords and remove the old table.
Test Plan:
- Ran migrations.
- Cloned with the same password that was configured before the migrations (worked).
- Cloned with a different, invalid password (failed).
- Changed password.
- Cloned with old password (failed).
- Cloned with new password (worked).
- Deleted password in web UI.
- Cloned with old password (failed).
- Set password to the same password as it currently is set to (worked, no "unique" collision).
- Set password to account password. !!This (incorrectly) works for now until account passwords migrate, since the uniqueness check can't see them yet.!!
- Set password to a new unique password.
- Cloned (worked).
- Revoked the password with `bin/auth revoke`.
- Verified web UI shows "no password set".
- Verified that pull no longer works.
- Verified that I can no longer select the revoked password.
- Verified that accounts do not interact:
- Tried to set account B to account A's password (worked).
- Tried to set account B to a password revoked on account A (worked).
- Spot checked the `password` and `passwordtransaction` tables for saniity.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18898
Summary:
Ref T13043. When we verify a password and a better hasher is available, we automatically upgrade the stored hash to the stronger hasher.
Add test coverage for this workflow and fix a few bugs and issues, mostly related to shuffling the old hasher name into the transaction.
This doesn't touch anything user-visible yet.
Test Plan: Ran unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18897
Summary:
Ref T13043. This provides a new piece of shared infrastructure that VCS passwords and account passwords can use to validate passwords that users enter.
This isn't reachable by anything yet.
The test coverage of the "upgrade" flow (where we rehash a password to use a stronger hasher) isn't great in this diff, I'll expand that in the next change and then start migrating things.
Test Plan: Added a bunch of unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18896
Summary: Ref T13043. I'd like to replace the manual credential revocation in the Phacility export workflow with shared code in `bin/auth revoke`, but we need it to run non-interactively. Add a `--force` flag purely to make our lives easier.
Test Plan: Ran `bin/auth revoke --everywhere ...` with and without `--force`. Got prompted without, got total annihilation with.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18895
Summary:
Ref T13043. Currently:
- Passwords are stored separately in the "VCS Passwords" and "User" tables and don't share as much code as they could.
- Because User objects are all over the place in the code, password hashes are all over the place too (i.e., often somewhere in process memory). This is a very low-severity, theoretical sort of issue, but it could make leaving a stray `var_dump()` in the code somewhere a lot more dangerous than it otherwise is. Even if we never do this, third-party developers might. So it "feels nice" to imagine separating this data into a different table that we rarely load.
- Passwords can not be //revoked//. They can be //deleted//, but users can set the same password again. If you believe or suspect that a password may have been compromised, you might reasonably prefer to revoke it and force the user to select a //different// password.
This change prepares to remedy these issues by adding a new, more modern dedicated password storage table which supports storing multiple password types (account vs VCS), gives passwords real PHIDs and transactions, supports DestructionEngine, supports revocation, and supports `bin/auth revoke`.
It doesn't actually make anything use this new table yet. Future changes will migrate VCS passwords and account passwords to this table.
(This also gives third party applications a reasonable place to store password hashes in a consistent way if they have some need for it.)
Test Plan: Added some basic unit tests to cover general behavior. This is just skeleton code for now and will get more thorough testing when applications move.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18894
Summary: Ref T13043. Adds CLI support for revoking SSH keys. Also retargets UI language from "Deactivate" to "Revoke" to make it more clear that this is a one-way operation. This operation is already correctly implemented as a "Revoke" operation.
Test Plan: Used `bin/auth revoke --type ssh` to revoke keys, verified they became revoked (with proper transactions) in the UI. Revoked keys from the web UI flow.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18893
Summary: Ref T13043. Allows CLI revocation of login sessions.
Test Plan: Used `bin/auth revoke --type session` with `--from` and `--everywhere` to revoke sessions. Saw accounts get logged out in web UI.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18892
Summary: Ref T13025. Fixes T10973. Fairly straightforward. The "points" type is just an alias for "text" today.
Test Plan: Bulk edited points.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10973
Differential Revision: https://secure.phabricator.com/D18889
Summary: Ref T13025. This makes limits (for fields like "Assign To") work in the bulk editor, so you can't type "Assign to: x, y, z" anymore.
Test Plan: Hit limit for "Assign to" and a custom project field. No limit for "Add subscribers".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18888
Summary:
See PHI173. Currently, Herald has an "Assign to" action for tasks, and you can specify custom fields with datasource values (like users or projects) that have a limit (like 1 "Owner", or 12 "Jury Members").
Herald doesn't support these limits right now, so you can write `[ Assign to ][ X, Y, Z ]`. This just means "Assign to X", but make it more clear by actually enforcing the limit in the UI.
Test Plan:
- Created a "projects" custom field with limit 1.
- Tried to create actions that 'assign to' or 'set custom field to' more than one thing, got helpfully rebuffed by the UI.
- Created an "add subscribers" action with more than one value.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18887
Summary:
See <https://discourse.phabricator-community.org/t/files-created-from-repository-contents-slightly-over-one-chunk-in-size-are-truncated-to-exactly-one-chunk-in-size/988/1>. Three issues here:
- When we finish reading `git cat-file ...` or whatever, we can end up with more than one chunk worth of bytes left in the internal buffer if the read is fast. Use `while` instead of `if` to make sure we write the whole buffer.
- Limiting output with `setStdoutSizeLimit()` isn't really a reliable way to limit the size if we're also reading from the buffer. It's also pretty indirect and confusing. Instead, just let the `FileUploadSource` explicitly implement a byte limit in a straightforward way.
- We weren't setting the time limit correctly on the main path.
Overall, this could cause >4MB files to "write" as 4MB files, with the rest of the file left in the UploadSource buffer. Since these files were technically under the limit, they could return as valid. This was intermittent.
Test Plan:
- Pushed a ~4.2MB file.
- Reloaded Diffusion a bunch, sometimes saw the `while/if` buffer race and produce a 4MB file with a prompt to download it. (Other times, the buffer worked right and the page just says "this file is too big, sorry").
- Applied patches.
- Reloaded Diffusion a bunch, no longer saw bad behavior or truncated files.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18885
Summary:
See PHI287. Currently, you can't get very much information about a task in the worker queue from the web UI.
This is largely intentional (e.g., it's bad if we let you inspect the content of a "send an administrator's password reset email" task), and a lot of the data is task-class specific so it would be a lot of work to expose it, but we can add one useful piece of information pretty easily: for tasks with an `objectPHID` that points at a valid object that's visible to the user, tell the user which object the task is associated with.
Test Plan: {F5386562}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18890
Summary: See PHI292. This is just a generalization of D18851: feed stories have the same issue as mail. Don't hide "requested a review" in either mail or feed.
Test Plan:
- Enable prototypes.
- No harbormaster builds.
- Create a revision.
- Pre-patch: no feed story.
- Post-patch: feed story.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18886
Summary:
Fixes T13040. To reproduce:
- View a file with blame enabled, where some line has an associated revision (say, `D123`).
- Edit `D123` so it exists and is a valid revision, but the viewer can't see it.
- Reload the page.
Instead, only add revisions to the map if we actually managed to load them.
Test Plan: Page no longer fatals.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13040
Differential Revision: https://secure.phabricator.com/D18884
Summary:
Fixes T13042. This hooks up the new "silent" mode from D18882 and makes it actually work.
The UI (where we tell you to go run some command and then reload the page) is pretty clumsy, but should solve some problems for now and can be cleaned up eventually. The actual mechanics (timeline aggregation, Herald interaction, etc.) are on firmer ground.
Test Plan:
- Made a normal bulk edit, got mail and feed stories.
- Made a silent bulk edit, no mail and no feed.
- Saw "Silent Edit" marker in timeline for silent edits:
{F5386245}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13042
Differential Revision: https://secure.phabricator.com/D18883
Summary:
Ref T13042. This adds a "silent" edit mechanism which suppresses feed stories, email, and notifications.
The other behaviors here are:
- The transactions are marked as "silent" so we can render a hint in the UI in the future to make it clear to users that they aren't missing email.
- If the editor uses Herald, mail rules are suppressed so they don't fire incorrectly (this mostly affects "the first time this rule matches, send me an email" rules: without this, they'd match "the first time" on the bulk edit, not send email, then never match again since they already matched).
- If the edit queues additional edits, those are applied silently too.
This doesn't (or, at least, shouldn't) actually change any behavior since you can't apply silent edits yet.
Test Plan:
Somewhat theoretical, since this isn't reachable yet. Should get meaningful testing in an upcoming change.
Did a bit of var_dump() / debug poking to attempt to verify that nothing too crazy is happening.
Viewed and edited objects, no changes in behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13042
Differential Revision: https://secure.phabricator.com/D18882
Summary:
Ref T13042. This is a very, very old policy-violating option from yesteryear which supported build systems publishing updates by adding comments to revisions, without sending email about it.
Harbormaster has served this role for a long time and this is policy-violating in the general case (it allows attackers to act in secret).
Test Plan: Grepped for affected symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13042
Differential Revision: https://secure.phabricator.com/D18881
Summary: Ref T13025. We're getting kind of a lot of actions, so put them in nice groups so they're easier to work with.
Test Plan: {F5386038}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18880
Summary: Ref T13025. Fixes T5689. A straightforward change!
Test Plan: Used the bulk editor to modify a custom "select" field like the one in T5689.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T5689
Differential Revision: https://secure.phabricator.com/D18879
Summary:
Ref T13025. This is some minor technical stuff: make the "select" bulk edit type a little more consistent with other types by passing data down instead of having it reach up the stack. This simplifies the implementation of a custom field "select" in a future change.
Also, provide an option list to the "select" edit field for object subtypes. This is only accessible via Conduit so it currently never actually renders anything in the UI, but with the bulk edit stuff we get some initialization order issues if we don't set anything. This will also make any future changes which expose subtypes more broadly more straightforward.
Test Plan:
- Bulk edited "select" fields, like "Status" and "Priority".
- No more fatal when trying to `getOptions()` internally on the subtype field.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18878
Summary:
Ref T13025. This allows custom tokenizer fields, like a "Owning Group" field, to be edited with the bulk editor.
See PHI173 for some context.
Test Plan: Edited a custom "Owner" field (a project tokenizer) with the bulk editor.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18877
Summary:
Ref T13025. Custom field transactions work somewhat unusually: the values sometimes need to be encoded. We currently do not apply this encoding correctly via Conduit.
For example, setting some custom PHID field to `["PHID-X-Y"]` fails with a bunch of JSON errors.
Add an extra hook callback so that EditTypes can apply processing to transaction values, then apply the correct CustomField processing.
This only affects Conduit. In a future diff, this also allows bulk edit of custom fields to work correctly.
Test Plan: Added a custom field to Maniphest with a list of projects. Used Conduit to bulk edit it (which now works, but did not before). Used the web UI to bulk edit it.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18876
Summary:
Ref T13025. Currently, the bulk editor takes an HTTP request and emits a list of "raw" transactions (simple dictionaries). This goes into the job queue, and the background job builds a real transaction.
However, the logic to turn an HTTP request into a raw transaction is ending up with some duplication, since we generally already have logic to turn an HTTP request into a full object.
Instead: build real objects first, then serialize them to dictionaries. Send those to the job queue, rebuild them into objects again, and we end up in the same spot with a little less code duplication.
Finally, delete the mostly-copied code.
Test Plan: Used bulk editor to add comments, projects, and rename tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18875
Summary:
Ref T13025. See PHI173. This supports the "Assign to" field in the new editor.
This is very slightly funky: to unassign tasks, you need to leave the field blank. I have half a diff to fix this, but the way the `none()` token works in the default datasource is odd so it needs a separate datasource. I'm punting on this for now since it works, at least, and isn't //completely// unreasonable.
This also simplifies some EditEngine stuff a little. Notably:
- I reorganized EditType construction slightly so subclasses can copy/paste a little bit less.
- EditType had `field` and `editField` properties which had the same values. I canonicalized on `editField` and made this value set a little more automatically.
Test Plan: Used bulk editor to reassign some tasks. By leaving the field blank, unassigned tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18874
Summary: Depends on D18867. Ref T13025. Fixes T8740. Rebuilds the tag/subscriber actions (add, remove, set) into the bulk editor.
Test Plan: Added, removed and set these values via bulk edit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T8740
Differential Revision: https://secure.phabricator.com/D18868
Summary:
Depends on D18866. Ref T13025. Fixes T12415. This makes the old "Add Comment" action work, and adds support for a new "Set description to" action (possibly, I could imagine "append description" being useful some day, maybe).
The implementation is just a `<textarea />`, not a whole fancy remarkup box with `[Bold] [Italic] ...` buttons, preview, typeaheads, etc. It would be nice to enrich this eventually but doing the rendering in pure JS is currently very involved.
This requires a little bit of gymnastics to get the transaction populated properly, and adds some extra validation since we need some code there anyway.
Test Plan:
- Changed the description of a task via bulk editor.
- Added a comment to a task via bulk editor.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T12415
Differential Revision: https://secure.phabricator.com/D18867
Summary: Depends on D18864. Ref T13025. Adds bulk edit support back for "status" and "priority" using `<select />` controls.
Test Plan:
Used bulk editor to change status and priority for tasks.
{F5374436}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18866
Summary: Depends on D18863. Ref PHI173. Ref T13025. After D18863, this job type is no longer used: the workflow uses a genric worker instead which can apply transactions to any object.
Test Plan: Grepped for callsites, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18864
Summary:
Depends on D18862. See PHI173. Ref T13025. Fixes T10005. This redefines bulk edits in terms of EditEngine fields, rather than hard-coding the whole thing.
Only text fields -- and, specifically, only the "Title" field -- are supported after this change. Followup changes will add more bulk edit parameter types and broader field support.
However, the title field now works without any Maniphest-specific code, outside of the small amount of binding code in the `ManiphestBulkEditor` subclass.
Test Plan: Used the bulk edit workflow to change the titles of tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10005
Differential Revision: https://secure.phabricator.com/D18863
Summary:
Depends on D18806. Ref T13025. See PHI173. Currently, Maniphest bulk edits are processed by a Maniphest-specific worker. I want to replace this with a generic worker which can apply transactional edits to any object.
This implements a generic worker, although it has no callers yet. Future changes give it callers, and later remove the Maniphest-specific worker.
Test Plan: See next changes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18862
