Summary:
Ref T10759. Check master/replica status during startup.
After D16903, this also means that we check this status after a database comes back online after being unreachable.
If a master is replicating, fatal (since this can do a million kinds of bad things).
If a replica is not replicating, warn (this just means the replica is behind so some data is at risk).
Also: if your masters were actually configured properly (mine weren't until this change detected it), we would throw away patches as we applied them, so they would only apply to the //first// master. Instead, properly apply all migration patches to all masters.
Test Plan:
- Started Phabricator with a replicating master, got a fatal.
- Stopped replication on a replica, got a warning.
- With two non-replicating masters, upgraded storage.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16904
Summary:
Ref T10759. We may "discover" the presence of a fatal setup error later, after starting Phabricator.
This can happen in a few ways, but most are unlikely. The one I'm immediately concerned about is:
- Phabricator starts up during a disaster with some databases unreachable.
- We start with warnings (unreachable databases are generally not fatal, since it's OK for some subset of hosts to be down in replicated/partitioned setups).
- The unreachable databases later recover and become accessible again.
- When we run checks against them, we discover that they are misconfigured.
Currently, "fatal" setup issues are not truly fatal if we're "in flight" -- we've survived setup checks at least once in the past. This is bad in the scenario above.
Especially with partitioning, it could lead to mangled data in a disaster scenario where operations staff makes a small configuration mistake while trying to get things running again.
Instead, if we "discover" a fatal error while already "in flight", reset the whole setup process as though the webserver had just restarted. Don't serve requests again until we can make it through setup without hitting fatals.
Test Plan:
- Started Phabricator with multiple masters, one of which was down and broken.
- Got a warning about the bad master.
- Revived the master.
- Before: Phabricator detects the fatal, but keeps serving requests.
- After: Phabricator detects the fatal, resets the webserver, and stops serving requests until the fatal is resolved.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16903
Summary:
Ref T10759. Currently, these checks run only against configured masters. Instead, check every host.
These checks also sort of cheat through restart during a recovery, when some hosts will be unreachable: they test for "disaster" by seeing if no masters are reachable, and just skip all the checks in that case.
This is bad for at least two reasons:
- After recent changes, it is possible that //some// masters are dead but it's still OK to start. For example, "slowvote" may have no master, but everything else is reachable. We can safely run without slowvote.
- It's possible to start during a disaster and miss important setup checks completely, since we skip them, get a clean bill of health, and never re-test them.
Instead:
- Test each host individually.
- Fundamental problems (lack of InnoDB, bad schema) are fatal on any host.
- If we can't connect, raise it as a //warning// to make sure we check it later. If you start during a disaster, we still want to make sure that schemata are up to date if you later recover a host.
In particular, I'm going to add these checks soon:
- Fatal if a "master" is replicating.
- Fatal if a "replica" is not replicating.
- Fatal if a database partition config differs from web partition config.
- When we let a database off with a warning because it's down, and later upgrade it to a fatal because we discover it is broken after it comes up again, fatal everything. Currently, we keep running if we "discover" the presence of new fatals after surviving setup checks for the first time.
Test Plan:
- Configured with multiple masters, intentionally broke one (simulating a disaster where one master is lost), saw Phabricator still startup.
- Tested individual setup checks by intentionally breaking them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16902
Summary:
Ref T11044. I'm going to hold this until after the release cut, but I think it's good to go.
This allows installs to configure multiple masters in `cluster.databases` and partition applications across them (for example, put Maniphest on a dedicated database).
When we make a Maniphest connection we go look up which master we should be hitting first, then connect to it.
This has at least approximately been planned for many years, so the actual change is largely just making sure that your config makes sense.
Test Plan:
- Configured `db001.epriestley.com` and `db002.epriestley.com` as master/master.
- Partitioned applications between them.
- Interacted with various applications, saw writes go to the correct host.
- Viewed "Database Servers" and saw partitioning information.
- Ran schema upgrades.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16876
Summary: Depends on D16847. Ref T11044. This updates the remaining storage-related workflows from the CLI to accommodate multiple masters.
Test Plan:
- Configured multiple masters.
- Ran all `bin/storage` workflows.
- Ran `arc unit --everything`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16848
Summary:
Depends on D16115. Ref T11044. In the brave new world of multiple masters, we need to check the schemata on each master when looking for missing storage patches, keys, schema changes, etc.
This realigns all the "check out what's up with that schema" calls to work for multiple hosts, and updates the web UI to include a "Server" column and allow you to browse per-server.
This doesn't update `bin/storage`, so it breaks things on its own (and unit tests probably won't pass). I'll update that in the next change.
Test Plan: Configured local environment in cluster mode with multiple masters, saw both hosts' status reported in web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16847
Summary:
Ref T11044. This moves toward partitioned application databases:
- You can define multiple masters.
- Convert all the easily-convertible code to become multi-master aware.
This doesn't convert most of `bin/storage` or "Config > Database (Stuff)" yet, as both are quite involved. They still work for now, but only operate on the first master instead of all masters.
Test Plan: Configured multiple masters, browsed around, ran `bin/storage` commands, ran `bin/storage --host ...`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16115
Summary:
This has been replaced by `PolicyCodex` after D16830. Also:
- Rebuild Celerity map to fix grumpy unit test.
- Fix one issue on the policy exception workflow to accommodate the new code.
Test Plan:
- `arc unit --everything`
- Viewed policy explanations.
- Viewed policy errors.
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D16831
Summary:
Fixes T11746. The opcache docs are on a different page, so point there if we're raising opcache issues.
(It's possible for a setup issue to say "configure X, or configure Y", where X is opcache and Y is non-opcache, so we may want to render both links.)
Test Plan: {F1867109}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11746
Differential Revision: https://secure.phabricator.com/D16685
Summary: Creates a background that renders inside the Quicksand frame, through sorcery.
Test Plan: Turn on Quicksand, visit lots of pages. See correct background colors. This probably blows something up I'm not testing.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16642
Summary:
Ref T11672. At low loads, this causes us to use more connections, which is pushing some installs over the default limits.
Rather than trying to walk users through changing `max_connections`, `open_files_limit`, `fs.file-max`, `ulimit`, etc., just put things back for now. After T11044 we should have headroom to use persistent connections within the default limits on all reasonable systems..
Test Plan: Loaded Phabricator, poked around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11672
Differential Revision: https://secure.phabricator.com/D16591
Summary:
Fixes T11683. Likely as a result of the persitent connections change, more users are seeing MySQL connection limit errors.
The persistent connections change means we use //fewer// connections at the high end, but I'm guessing PHP is keeping some more connections around in the pool, so while high-traffic hosts use fewer connections, low-traffic hosts now use more.
Raise an explicit setup warning about this. Users should be adjusting it anyway, there's no value to leaving it at extremely low default and connections are baiscally free until you run out of outbound ports.
Test Plan: {F1844630}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11683
Differential Revision: https://secure.phabricator.com/D16586
Summary:
The commit which added checks for the old homepage options (now in
Dashboard) in rP9d9a47e9cf, added them to the auth section, where they
would present:
This option has been migrated to the "Auth" application. Your old
configuration is still in effect, but now stored in "Auth" instead of
configuration. Going forward, you can manage authentication from the
web UI.
Remove them from the moved-to-Auth list, and coalesce the multiple
definitions of the help text into one.
Test Plan:
- set maniphest.priorities.unbreak-now to something
- observe the setup issue reported
- hope it tells you the right thing
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley, chad
Differential Revision: https://secure.phabricator.com/D16576
Summary:
Fixes T11627.
Beyond being complex, I have no real reason to believe these checks even work (and they don't test repositories, file storage, logfiles, etc).
Test Plan:
Faked the error:
{F1813433}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11627
Differential Revision: https://secure.phabricator.com/D16544
Summary:
Ref T11613. In D16503/T11598 I refined the setup flow to improve messaging for early-stage setup issues, but failed to fully untangle things.
We sometimes still try to access a cache which uses configuration before we build configuration, which causes an error.
Instead, store "are we in flight / has setup ever worked?" in a separate cache which doesn't use the cache namespace. This stops us from trying to read config before building config.
Test Plan:
Hit bad extension error with a fake extension, got a proper setup help page:
{F1812803}
Solved the error, reloaded, broke things again, got a "friendly" page:
{F1812805}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11613
Differential Revision: https://secure.phabricator.com/D16542
Summary:
Ref T11589. When we hit a fatal setup issue (essentially always a connection failure) //after// we've already survived them on at least one request, we can be pretty sure a server went down and that the problem is not a setup/configuration issue.
In this case, show a friendlier error page instead of the fairly detailed technical one.
Test Plan:
- Broke MySQL config.
- Restarted Apache.
- Got the "admin/setup" error page:
{F1803268}
- Fixed the MySQL config.
- Loaded any page, to put us "in flight".
- Broke MySQL config.
- Loaded any page.
- Got the friendly "in flight" error page:
{F1803271}
If you want to design this better, easiest way to get to it is:
- Set `mysql.port` to `9999` in `conf/local/local.json`.
- Reload any page while already running (don't restart).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16503
Summary:
Ref T11589. Previously, when we failed to load database configuration we just continued anyway, in order to get to setup checks so we could raise a better error.
There was a small chance that this could lead to pages running in a broken state, where ONLY that connection failed and everything else worked. This was accidentally fixed by narrowing the exceptions we continue on in D16489.
However, this "fix" meant that users no longer got helpful setup instructions. Instead:
- Keep throwing these exceptions: it's bad to continue if we've failed to connect to the database.
- However, catch them and turn them into setup errors.
- Share all the setup code so these errors and setup check errors work the same way.
Test Plan:
- Intentionally broke `mysql.host` and `mysql.pass`.
- Loaded pages.
- Got good setup errors.
- Hit normal setup errors too.
- Put everything back.
- Swapped into cluster mode.
- Intentionally broke cluster mode, saw failover to readonly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16501
Summary:
Ref T11589. This runs:
- preflight checks (critical checks: PHP version stuff, extensions);
- configuration;
- normal checks.
The PHP checks are split into critical ("bad version") and noncritical ("sub-optimal config").
I tidied up the extension checks slightly, we realistically depend on `cURL` nowadays.
Test Plan:
- Faked a preflight failure.
- Hit preflight check.
- Got expected error screen.
- Loaded normal pages.
- Hit a normal setup check.
- Used DarkConsole "Startup" tab to verify that preflight checks take <1ms to run (we run them on every page without caching, at least for now, but they only do trivial checks like PHP versions).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16500
Summary:
Ref T11589. Currently, initialization order is a bit tangled: we load configuration from the database, then later test if we can connect to the database.
Instead, I'm going to do: preflight checks ("PHP Version OK?", "Extensions installed?"), then configuration, then normal setup checks.
To prepare for this, flag core checks as "preflight" and add a setup panel to visually confirm that I didn't miss anything.
Test Plan: {F1803210}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16499
Summary:
Fixes T11590. Currently, we incorrectly consider cluster repository versions that are (or were) on devices which are no longer part of the active cluster service when building this status screen.
Instead, ignore them. This is just a display bug; the actual `ClusterEngine` already had similar logic.
Test Plan:
- Added a bad leader record to `repository_workingcopyversion`.
- Before patch, got a bad "Partial (1w)" sync:
{F1802292}
- After patch, got a good "Sycnchronized":
{F1802293}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11590
Differential Revision: https://secure.phabricator.com/D16492
Summary: Ref T11132, swaps in new UI for welcome page using guide modules
Test Plan: Test instance and non instance guides. Test each setting. Unclear on how to test people / Phacility. Just change the URL link?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16482
Summary: Ref T11132. Adds a text panel to feed if no stories are present and the user is an admin. Seems ok-ish for 15 minutes. Happy to take content suggestions.
Test Plan: Make a new install, see panel. Log in as new user, don't see panel.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16479
Summary: This adds status icons, locked, hidden, editable, customized, to the list of options in config. Makes it easier to read and assertain state.
Test Plan:
View a hidden, customized, editable, and locked.
{F1796320}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16475
Summary: Ref T11559. This makes managing large numbers of repositories slightly easier.
Test Plan: {F1796119}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11559
Differential Revision: https://secure.phabricator.com/D16472
Summary: Ref T11132, significantly cleans up the Config app, new layout, icons, spacing, etc. Some minor todos around re-designing "issues", mobile support, and maybe another pass at actual Group pages.
Test Plan: Visit and test every page in the config app, set new items, resolve setup issues, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam, Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16468
Summary: Ref T11132. This gets rid of the red bar for admins and instead shows a new menu item next to notifications/chat if there are unresolved configuration issues. Menu goes away if there are no issues. May move this later into the bell icon, but think think might be the right place to start especially for NUX and updates. Maybe limit the number of items?
Test Plan:
Tested with some, lots, and no config issues.
{F1790156}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16461
Summary:
Fixes T9235. When the stars align, PHP 5.6 or newer emits a deprecation warning on startup about "always_populate_raw_post_data" which occurs too early for us to intercept and can break responses by adding garbage to the output.
These settings appear to be sufficient:
```
always_populate_raw_post_data = 1
display_errors = 1
display_startup_errors = 1
error_reporting = -1
```
Then make a request with an unusual content type:
```
$ curl -X POST -H "Content-Type: application/json" -d "{foo: bar}" http://phabricator.example.com/
```
This triggers the warning:
```
<br />
<b>Deprecated</b>: Automatically populating $HTTP_RAW_POST_DATA is deprecated and will be removed in a future version. To avoid this warning set 'always_populate_raw_post_data' to '-1' in php.ini and use the php://input stream instead. in <b>Unknown</b> on line <b>0</b><br />
<br />
...
```
To avoid this, just instruct administrators to set this value to "-1", which completely disables the feature and silences the warning.
Test Plan:
- Reproduced this issue by following the instructions above.
- Triggered the setup issue locally and read all the captivating prose:
{F1786911}
- Made the configuration change it directed me to, saw the setup issue resolve.
Reviewers: jcox
Reviewed By: jcox
Maniphest Tasks: T9235
Differential Revision: https://secure.phabricator.com/D16454
Summary: Fixes T8850. Previously, if a user's preamble script mangled `$_SERVER['REMOTE_ADDR']` or somehow set it to `null`, the user would get errors when performing certain actions. Now those errors shouldn't occur, and instead the user will be warned that there is a setup issue related to their preamble script.
Test Plan: Create a preamble script that contains `$_SERVER['REMOTE_ADDR'] = null;` then navigate to /config/issue/. There should be a warning there about `REMOTE_ADDR` not being available.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, yelirekim, epriestley
Maniphest Tasks: T8850
Differential Revision: https://secure.phabricator.com/D16450
Summary: Switches over to new property UI boxes, splits core and apps into separate pages. Move Versions into "All Settings". I think there is some docs I likely need to update here as well.
Test Plan: Click on each item in the sidebar, see new headers.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16429
Summary: Fixes T11501. Let's you pass in a full PHUIIconView or just the icon name to give ObjectListItem a large icon.
Test Plan: Alamanac, Applications, Drydock, Settings, Search Typeahead, Config page...
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11501
Differential Revision: https://secure.phabricator.com/D16421
Summary:
When I wrote this the first time, only hosted repositories could be clustered.
This check wasn't removed when I allowed observed repositories to be clustered in D15986.
Test Plan:
Reloaded {nav Config > Repository Servers} page, saw more stuff locally.
Reviewed the cardinal digits between 1 and 17, inclusive.
Reviewers: chad, avivey
Reviewed By: avivey
Differential Revision: https://secure.phabricator.com/D16392
Summary:
Fixes T11453. Currently, commit message summaries are limited to 80 bytes. This may only be 20-40 characters for CJK languages or langauges with Cyrillic script.
Increase storage size to 255, then truncate to the shorter of 255 bytes or 80 glyphs. This preserves the same behavior for latin languages, but is less tight for Russian, etc.
Some minor additional changes:
- Provide a way to ask "how much data fits in this column?" so we don't have to duplicate column lengths across summary checks or UI errors like "title too long".
- Remove the `text80` datatype, since no other columns use it and we have no use cases (or likely use cases) for it.
Test Plan:
- Made a commit with a Cyrillic title, saw reasonable summarization in UI:
{F1757522}
- Added and ran unit tests.
- Grepped for removed `SUMMARY_MAX_LENGTH` constant.
- Grepped for removed `text80` data type.
Reviewers: avivey, chad
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T11453
Differential Revision: https://secure.phabricator.com/D16385
Summary: Converts final call site to PHUIDocumentViewPro.
Test Plan: grep for PHUIDocumentView, view new Welcome Page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16379
Summary: Fixes T11437. Provides a normal form for configuring this, instead of weird "look up the PHID and adjust things in the database" stuff.
Test Plan:
{F1753651}
{F1753652}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11437
Differential Revision: https://secure.phabricator.com/D16377
Summary:
This updates the eye logo and removes the formal wordmark "Phabricator" as an image. Instead we'll use the new updated eye logo and plain text for "Phabricator", both of which are more friendly and less industrial.
Installs that already use the `header-logo` customization setting will need to rebuild their logo to 80px x 80px. They will then also get to use plain text to whitebox their install as they see fit.
Test Plan:
Tested new logo at desktop, tablet, and mobile sizes. Set a random instance name, saw new wordmark. Created a really long wordmark of MMMMMMMMMMMM, saw text cut off so UI doesn't break. May need some additional tweaking, but I think we covered the most edge cases here.
{F1751791, size=full}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: edibiase, bjshively, yelirekim, Korvin
Maniphest Tasks: T4214, T11096
Differential Revision: https://secure.phabricator.com/D16373
Summary: Ref T9640. Fixes T9888. Decline to support PHP 7 until the async signal handling issue in T11270 is resolved.
Test Plan: Faked local version, got helpful error message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9640, T9888
Differential Revision: https://secure.phabricator.com/D16231
Summary:
Ref T11140. This makes encryption actually work:
- Provide a new configuation option, `keyring`, for specifying encryption keys.
- One key may be marked as `default`. This activates AES256 encryption for Files.
- Add `bin/files generate-key`. This is helps when generating valid encryption keys.
- Add `bin/files encode`. This changes the storage encoding of a file, and helps test encodings and migrate existing data.
- Add `bin/files cycle`. This re-encodes the block key with a new master key, if your master key leaks or you're just paraonid.
- Document all these options and behaviors.
Test Plan:
- Configured a bad `keyring`, hit a bunch of different errors.
- Used `bin/files generate-key` to try to generate bad keys, got appropriate errors ("raw doesn't support keys", etc).
- Used `bin/files generate-key` to generate an AES256 key.
- Put the new AES256 key into the `keyring`, without `default`.
- Uploaded a new file, verified it still uploaded as raw data (no `default` key yet).
- Used `bin/files encode` to change a file to ROT13 and back to raw. Verified old data got deleted and new data got stored properly.
- Used `bin/files encode --key ...` to explicitly convert a file to AES256 with my non-default key.
- Forced a re-encode of an AES256 file, verified the old data was deleted and a new key and IV were generated.
- Used `bin/files cycle` to try to cycle raw/rot13 files, got errors.
- Used `bin/files cycle` to cycle AES256 files. Verified metadata changed but file data did not. Verified file data was still decryptable with metadata.
- Ran `bin/files cycle --all`.
- Ran `encode` and `cycle` on chunked files, saw commands fail properly. These commands operate on the underlying data blocks, not the chunk metadata.
- Set key to `default`, uploaded a file, saw it stored as AES256.
- Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11140
Differential Revision: https://secure.phabricator.com/D16127
Summary: Ref T11098. There is no reason to maintain these as separate values now that they can be configured in global settings.
Test Plan:
- Hit and read setup issue.
- Fiddled with settings.
- I'll vet this more throughly in the next diff since I need to fix an issue with global defaults in mail and can explicitly test this at the same time.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16117
Summary: Ref T11120. If this works, I'll just remove this option completely.
Test Plan: ¯\_(ツ)_/¯
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11120
Differential Revision: https://secure.phabricator.com/D16095
Summary:
Ref T4103. This doesn't get everything, but takes care of most of the easy stuff.
The tricky-ish bit here is that I need to move timezones, pronouns and translations to proper settings. I expect to pursue that next.
Test Plan:
- Grepped for `loadPreferences` to identify callsites.
- Changed start-of-week setting, loaded Calendar, saw correct start.
- Visited welcome page, read "Adjust Settings" point.
- Loaded Conpherence -- I changed behavior here slightly (switching threads drops the title glyph) but it wasn't consistent to start with and this seems like a good thing to push to the next version of Conpherence.
- Enabled Filetree, toggled in Differential.
- Disabled Filetree, no longer visible in Differential.
- Changed "Unified Diffs" preference to "Small Screens" vs "Always".
- Toggled filetree in Diffusion.
- Edited a task, saw sensible projects in policy dropdown.
- Viewed user profile, uncollapsed/collapsed side nav, reloaded page, sticky'd.
- Toggled "monospaced textareas", used a comment box, got appropriate fonts.
- Toggled durable column.
- Disabled title glyphs.
- Changed monospaced font to 18px/36px impact.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16004
Summary:
Fixes T11043. This page was still reading the old information directly instead of going through the cluster-aware stuff.
Have it ask the cluster-aware stuff for information instead.
Test Plan:
- Nuked MySQL on localhost.
- Configured cluster hosts.
- Loaded "Database Status" page -- worked after patch.
- Grepped for any remaining `mysql.configuration-provider` stragglers, came up empty.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11043
Differential Revision: https://secure.phabricator.com/D15982
Summary:
Ref T10939. I'm not //totally// opposed to the existence of this element, but I think it's the kind of thing that would never make it upstream today. I think this should just be a T418 custom sort of thing in the long run, not a mainline upstream feature.
Overall, I think this thing is nearly useless and just adds visual clutter. My dashboard is about 100% red. This also sort of teaches users that it's fine to let revisions sit for a couple of days, which isn't what I'd like the UI to teach. Finally, removing it helps the UI feel a little less cluttered after the visually busy changes in D15926.
Test Plan: Grepped for removed config. Viewed revision list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15927
Summary: Ref T10694. This setting no longer has any effect: we always show a limited amount of context now.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15886
Summary:
Fixes T10876. Currently, we can end up with a setup warning banner sticking on each web device, since the state is stored in local cache.
Instead:
- When we actually run the setup checks, save the current state in the database.
- Before we show a cached banner, make sure the database still says the checks are a problem.
This could lead to some inconsistencies if setup checks legitimately pass on some hosts but not on others. For example, if you have `git` installed on one machine but not on another, we may raise a setup warning ("No Git Binary!") about it on one host only.
For now, assume users have their operational environments in some sort of reasonable shape and can install the same stuff everywhere. In the future, we could split the issues into "global" and "per-host" issues if we run into problems with this.
Test Plan:
This is somewhat tricky to test locally since you really need multiple webservers to test it properly, but I:
- Created some setup issues, saw banner.
- Ignored/cleared them, saw banner go away.
- Verified database cache writes were occurring properly.
Then I sort of faked it like this:
- Created a setup issue.
- Manually set the database cache value to `[]` ("no issues").
- Reloaded page.
- No more banner.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10876
Differential Revision: https://secure.phabricator.com/D15802
Summary: Ref T4292. This adds a new high-level overview panel.
Test Plan: {F1238854}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15772
Summary:
Ref T10832. In practice, `git --version` is not a useful test for this issue:
- Vendors like Debian have backported the patch into custom versions like `0.0.0.1-debian-lots-of-patches.3232`.
- Vendors like Ubuntu distribute multiple different versions which report the same string from `git --version`, some of which are patched and some of which are not.
In other cases, we can perform an empirical test for the vulnerability. Here, we can not, because we can't write a 2GB path in a reasonable amount of time.
Since vendors (other than Apple) //generally// seem to be on top of this and any warning we try to raise based on `git --version` will frequently be incorrect, don't raise this warning.
I'll note this in the changelog instead.
Test Plan: Looked at setup issues, no more warning for vulnerable git version.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10832
Differential Revision: https://secure.phabricator.com/D15756
Summary: Ref T10832. Raise a setup warning for out-of-date versions of `git`.
Test Plan: {F1224632}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10832
Differential Revision: https://secure.phabricator.com/D15745
Summary:
Fixes T9385. This was accidentally mangled a bit a long time ago by D12797, which was a 1,000-file change which got almost everything right.
Simplify the message and fix all the `%s` conversions and how they map to parameters.
Test Plan: {F1220400}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9385
Differential Revision: https://secure.phabricator.com/D15722
Summary:
Fixes T10697. This finishes bringing the rest of the config up to cluster power levels.
Phabricator is now given an arbitrarily long list of notification servers.
Each Aphlict server is given an arbitrarily long list of ports to run services on.
Users are free to make them meet in the middle by proxying whatever they want to whatever else they want.
This should also accommodate clustering fairly easily in the future.
Also rewrote the status UI and changed a million other things. 🐗
Test Plan:
{F1217864}
{F1217865}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15703
Summary: Ref T10697. Mostly straightforward. Also allow the server to have multiple logs and log options in the future (e.g., different verbosities or separate admin/client logs or whatever). No specific plans for this, but the default log is pretty noisy today.
Test Plan: Set up a couple of logs, started server, saw it log to them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15702
Summary: Ref T10697. This isn't everything but starts generalizing options and moving us toward a cluster-ready state of affairs.
Test Plan: Started server in various configurations, hit most (all?) of the error cases with bad configs, sent test notifications.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15701
Summary:
Ref T10784. Currently, if you terminate SSL at a load balancer (very common) and use HTTP beyond that, you have to fiddle with this setting in your premable or a `SiteConfig`.
On the balance I think this makes stuff much harder to configure without any real security benefit, so don't apply this option to intracluster requests.
Also document a lot of stuff.
Test Plan: Poked around locally but this is hard to test outside of a production cluster, I'll vet it more thoroughly on `secure`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10784
Differential Revision: https://secure.phabricator.com/D15696
Summary:
Ref T4292. This adds some very basic cluster/device data to the new management view. Nothing interesting yet.
Also deal with disabled bindings a little more cleanly.
Test Plan: {F1214619}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15685
Summary:
Ref T4571. Write more of the missing documentation sections and clarify a few things.
Since the "replicating master" check needs a special permission, imposes a performance penalty, is probably very difficult to misconfigure, and likely not a big deal anyway, just drop the idea of trying to automatically detect + prevent it. We still show if it's an issue on the status page, provided we have permission to check.
When you don't have any cluster databases configured, never stop trying to connect to the default master database. We might want to do this eventually as load reduction, but just don't muddy the waters too much for now while things stabilize.
Test Plan:
- Tested functionality in cluster, non-cluster, and degraded-cluster modes.
- Used status console to monitor a health check cycle.
- Read docs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15679
Summary:
Ref T4571. When a database goes down briefly, we fall back to replicas.
However, this fallback is slow (not good for users) and keeps sending a lot of traffic to the master (might be bad if the root cause is load-related).
Keep track of recent connections and fully degrade into "severed" mode if we see a sequence of failures over a reasonable period of time. In this mode, we send much less traffic to the master (faster for users; less load for the database).
We do send a little bit of traffic still, and if the master recovers we'll recover back into normal mode seeing several connections in a row succeed.
This is similar to what most load balancers do when pulling web servers in and out of pools.
For now, the specific numbers are:
- We do at most one health check every 3 seconds.
- If 5 checks in a row fail or succeed, we sever or un-sever the database (so it takes about 15 seconds to switch modes).
- If the database is currently marked unhealthy, we reduce timeouts and retries when connecting to it.
Test Plan:
- Configured a bad `master`.
- Browsed around for a bit, initially saw "unrechable master" errors.
- After about 15 seconds, saw "major interruption" errors instead.
- Fixed the config for `master`.
- Browsed around for a while longer.
- After about 15 seconds, things recovered.
- Used "Cluster Databases" console to keep an eye on health checks: it now shows how many recent health checks were good:
{F1213397}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15677
Summary:
Ref T4571. Ref T10759. Ref T10758. This isn't complete, but gets most of the job done:
- When `cluster.databases` is set up, most things ignore `mysql.host` now.
- You can `bin/storage upgrade` and stuff works.
- You can browse around in the web UI and stuff works.
There's still a lot of weird tricky stuff to navigate, and this has real no advantages over configuring a single server yet (no automatic failover, etc).
Test Plan:
- Configured `cluster.databases` to point at my `t1.micro` hosts in EC2 (master + replica).
- Ran `bin/storage upgrade`, got a new install setup on them properly.
- Survived setup warnings, browsed around.
- Switched back to local config, ran `bin/storage upgrade`, browsed around, went through setup checks.
- Intentionally broke config (bad hosts, no masters) and things seemed to react reasonably well.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571, T10758, T10759
Differential Revision: https://secure.phabricator.com/D15668
Summary: Ref T4571. The configuration option still doesn't do anything, but add a status panel for basic setup monitoring.
Test Plan:
Here's what a good version looks like:
{F1212291}
Also faked most of the errors it can detect and got helpful diagnostic messages like this:
{F1212292}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15667
Summary:
Ref T4571. This adds a new option which allows you to upgrade your one-host configuration to a multi-host configuration by configuring it.
Doing this currently does nothing. I wrote a lot of words about what it is //supposed// to do in the future, though.
Test Plan:
- Tried to configure the option in all the possible bad ways, got errors.
- Read documentation.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15663
Summary:
Ref T4571. There will be a very long path beyond this, but add a basic read-only mode. You can explicitly enable this to put Phabricator in a sort of "maintenance" mode today if you're swapping databases or something.
In the long term, we'll automatically degrade into this mode if the master database is down.
Test Plan:
- Enabled read-only mode.
- Browsed around.
- Didn't immediately see anything that was totally 100% broken.
Most stuff is 80-90% broken right now. For example:
- Stuff like submitting comments doesn't work, and gives you a confusing, unhelpful error.
- None of the UI really knows that it's read-only. EditEngine stuff should all hide itself and say "you can't add new comments while an install is in read-only mode", for example, but currently does not.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15662
Summary: Testing out a new 'nav' layout in Settings / Config. Spent a few days here and couldn't find much better overall.
Test Plan: View each page in Settings and in Config. Save some config options. Test mobile, desktop, tablet.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15659
Summary: Converts Config to new UI, updates to `newPage`
Test Plan: Review all pages in Config, setup issues, ignore an issue, edit a config option
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15587
Summary:
Ref T10449. Currently, we store classes (like "AlmanacClusterRepositoryServiceType") in the database.
Instead, store types (like "cluster.repository").
This is a small change, but types are a little more flexible (they let us freely reanme classes), a little cleaner (fewer magic strings in the codebase), and a little better for API usage (they're more human readable).
Make this minor usability change now, before we unprototype.
Also make services searchable by type.
Also remove old Almanac API endpoints.
Test Plan:
- Ran migration, verified all data migrated properly.
- Created, edited, rebound, and changed properties of services.
- Searched for services by service type.
- Reviewed available Conduit methods.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10449
Differential Revision: https://secure.phabricator.com/D15346
Summary: Moves all the one off object calls to PHUIRemarkupView, adds a "Document" call as well (future plans).
Test Plan: Visited most pages I could get access to, but may want extra careful eyes on this diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15281
Summary: Fixes T10259. There was no real reason to do this `ip2long()` stuff in the first place -- it's very slightly smaller, but won't work with ipv6 and the savings are miniscule.
Test Plan:
- Ran migration.
- Viewed logs in web UI.
- Pulled and pushed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10259
Differential Revision: https://secure.phabricator.com/D15165
Summary:
A user in IRC seemed very confused by this, and worked extremely hard to shoot themsevles in the foot by manually writing locked configuration to the database.
Try to explain why configuration is locked better.
Test Plan:
Mostly reading.
{F1078905}
{F1078906}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15128
Summary: Mostly for consistency, we're not using other forms of icons and this makes all classes that use an icon call it in the same way.
Test Plan: tested uiexamples, lots of other random pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15125
Summary: Reasonable first pass, removes the "light" header, due to pain of upkeep. Reinforces UI color into the Profile Nav (and later likely dropmenu hovers). Most of this is reasonably easy to maintain now, but I may do a more accurate color pass after I get some more time together with it. For now this feels pretty good if you're developing in a different color UI.
Test Plan:
Switch between all the colors, hover over all the states.
{F1076766}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15120
Summary: Fixes T10217. This extra entry is just a mistake because of `rst` + `rest` both being valid suffixes. We don't need both entries.
Test Plan: Edited a paste, only saw one entry in dropdown for restructured text.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10217
Differential Revision: https://secure.phabricator.com/D15114
Summary:
Ref T10195. Distinguish between "database does not exist" and "database exists, you just don't have permission to access it".
We can't easily get this information out of INFORMATION_SCHEMA but can just `SHOW TABLES IN ...` every database that looks like it's missing and then look at the error code.
Test Plan:
- Created a user `limited` with limited access.
- Ran `bin/storage adjust`.
- Got hopefully more helpful messages about access problems, instead of "Missing" errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10195
Differential Revision: https://secure.phabricator.com/D15079
Summary: Removes header gradient images for flat, CSS controlled colors. I didn't convert the "pony" colors over, going with few options for easier theme-ability.
Test Plan:
Test each color choice.
{F1063828}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15052
Summary:
See IRC. We're supposed to repair configuration, but if custom validators throw a generic `Exception` or use `PhutilTypeSpec` to do a check, we may explode way harder than we intend to.
Instead, soften these exceptions into validation exceptions so we repair configuration, raise a setup issue, and continue.
Test Plan: {F1059609}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14998
Summary:
Ref T5155. Swaps Phabricator over to the new first-party S3 client using the v4 authentication API so it works in all regions.
The API requires an explicit region, so the new `amazon-s3.region` is now required. I'll write guidance about this.
Test Plan:
- Uploaded files to S3.
- Migrated ~1GB of files to S3.
- Loaded a bunch of files off S3.
- Browsed around the S3 bucket.
- Deleted a file, verified the data on S3 was destroyed.
- Hit new setup warning.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5155
Differential Revision: https://secure.phabricator.com/D14982
Summary:
Ref T10010. Ref T5819. General alignment of the stars:
- There were some hacks in Conduit around stripping `fa-...` off icons when reading and writing that I wanted to get rid of.
- We probably have room for a subtitle in the new heavy nav, and using the icon name is a good starting point (and maybe good enough on its own?)
- The project list was real bad looking with redundant tag/names, now it is very slightly less bad looking with non-redundant types?
- Some installs will want to call Milestones something else, and this gets us a big part of the way there.
- This may slightly help to reinforce "tag" vs "policy" vs "group" stuff?
---
I'm letting installs have enough rope to shoot themselves in the foot (e.g., define 100 icons). It isn't the end of the world if they reuse icons, and is clearly their fault.
I think the cases where 100 icons will break down are:
- Icon selector dialog may get very unwieldy.
- Query UI will be pretty iffy/huge with 100 icons.
We could improve these fairly easily if an install comes up with a reasonable use case for having 100 icons.
---
The UI on the icon itself in the list views is a little iffy -- mostly, it's too saturated/bold.
I'd ideally like to try either:
- rendering a "shade" version (i.e. lighter, less-saturated color); or
- rendering a "shade" tag with just the icon in it.
However, there didn't seem to be a way to do the first one right now (`fa-example sh-blue` doesn't work) and the second one had weird margins/padding, so I left it like this for now. I figure we can clean it up once we build the thick nav, since that will probably also want an identical element.
(I don't want to render a full tag with the icon + name since I think that's confusing -- it looks like a project/object tag, but is not.)
Test Plan:
{F1049905}
{F1049906}
Reviewers: chad
Reviewed By: chad
Subscribers: 20after4, Luke081515.2
Maniphest Tasks: T5819, T10010
Differential Revision: https://secure.phabricator.com/D14918
Summary: I feel like the daemon configuration should be locked from editing from the web UI, given that much of it won't work unless the daemons are restarted anyway.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14867
Summary:
Ref T10010. This implements technical groundwork for subprojects. Specifically, it implements policy rules like Phriction:
- to see a project, you must be able to see all of its parents (and the project itself).
- you can edit a project if you can edit any of its parents (or the project itself).
To facilitiate this, we load all project ancestors when querying projects so we can do the view/edit checks.
This does NOT yet implement:
- proper membership rules for these projects (up next);
- any kind of UI to let users create subprojects.
Test Plan:
- Added unit tests.
- Executed unit tests.
- Browsed Projects (no change in behavior is expected).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14861
Summary:
Ref T9979. This uses ngrams (specifically, trigrams) to build a reasonably efficient index for substring matching. Specifically, for a package like "Example", with ID 123, we store rows like this:
```
< ex, 123>
<exa, 123>
<xam, 123>
<amp, 123>
<mpl, 123>
<ple, 123>
<le , 123>
```
When the user searches for `exam`, we join this table for packages with tokens `exa` and `xam`. MySQL can do this a lot more efficiently than it can process a `LIKE "%exam%"` query against a huge table.
When the user searches for a one-letter or two-letter string, we only search the beginnings of words. This is probably what they want, the only thing we can do quickly, and a reasonable/expected behavior for typeaheads.
Test Plan:
- Ran storage upgrades and search indexer.
- Searched for stuff with "name contains".
- Used typehaead and got sensible results.
- Searched for `aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz` and saw only 16 joins.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9979
Differential Revision: https://secure.phabricator.com/D14846
Summary:
Ref T9979. I picked this name long before the advent of modern "Engine" architecture and it ended up being pretty confusing.
Rename "SearchEngine" (currently: mysql or elasticsearch, used to store and query fulltext indexes) to "FulltextStorageEngine" to make it more clear what it does and disambituate it from ApplicationSearch, which also has a bunch of stuff called "SearchEngine", "SearchEngineExtension", etc.
Test Plan: Grepped for `phabricatorsearchengine`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9979
Differential Revision: https://secure.phabricator.com/D14843
Summary: Ref T10003. Give installs more warning about these changes.
Test Plan: Changed configuration, saw warning. Reset configuration, no warning.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10003
Differential Revision: https://secure.phabricator.com/D14817
Summary: Ref T9908. Move all the "pro" stuff into the old locations.
Test Plan: Created/edited tasks, looked at URIs, saw non-pro ones. Grepped for `editpro`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14717
Summary: Ref T9908. This is the last of the things that need to swap over.
Test Plan:
- Created tasks from a workboard.
- Created tasks in different columns.
- Edited tasks.
- Used `?parent=..`.
- Verified that default edit form config now affects comment actions.
- No more weird comment thing on forms, at least for now.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14715
Summary:
- ipull there is wrong
- The `+` wasn't doing what I thought it was doing.
- I already forgot what that detour was doing, so I wrote it down.
Test Plan: Load Versions page, see no error log.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D14686
Summary: This just pretties up some config like `maniphest.custom-field-definitions` which I noticed was kind of hard to read while chasing down other stuff.
Test Plan: {F1014940}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14679
Summary:
Fixes T9874.
- Stop using the phrase "restart your webserver". Instead, say "restart Phabricator".
- Write a document explaining that "Restart Phabricator" means to restart all of the server processes, depending on how your configuration is set up, and approximately how to do that.
- Link to this document.
- In places where we are not specifically giving instructions and the user isn't expected to do anything, be intentionally vague so as to avoid being misleading.
Test Plan:
- Read document.
- Hit "exetnsion" and "PHP config" setup checks, got "restart Phabricator" with documentation links in both cases.
Reviewers: chad
Maniphest Tasks: T9874
Differential Revision: https://secure.phabricator.com/D14636
Test Plan: warning is not in warnings list.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D14594
Summary: Ref T6049, remarkup links to use short URLs and make commenting on Phurl's actually work
Test Plan:
- Create Phurl `U123`
- Comment on that Phurl `((123))`
Comment should link to `/u/123`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T6049
Differential Revision: https://secure.phabricator.com/D14477
Summary: Ref T7053. Remove the `envHash` and `envInfo` fields, which are no longer used now that the daemons restart automagically. Depends on D14458.
Test Plan: Saw no more setup issues.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: tycho.tatitscheff, epriestley
Maniphest Tasks: T7053
Differential Revision: https://secure.phabricator.com/D14446
Summary: Cleaning up house, may revisit in a v2. Removes ability to set Disqus or Facebook comments as comment system on Phame Posts.
Test Plan: Create blog, create post, edit blog, view live pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: btrahan, Korvin
Maniphest Tasks: T9746
Differential Revision: https://secure.phabricator.com/D14448
Summary: Ref T8995, config option for Phurl short domain to share shortened URL's
Test Plan:
- Configure Phurl short domain to something like "zz.us"
- Navigate to `zz.us`; get 404
- Navigate to `zz.us/u/3` or `zz.us/u/alias` where `U3` is an existing Phurl; redirect to correct destination
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T8995
Differential Revision: https://secure.phabricator.com/D14447
Summary:
Ref T9132. We have several places in the code that sometimes need to parse complex types. For example, we accept all of these in ApplicationSearch and now in ApplicationEditor:
> /?subscribers=cat,dog
> /?subscribers=PHID-USER-1111
> /?subscribers[]=cat&subscribers[]=PHID-USER-2222
..etc. The logic to parse this stuff isn't too complex, but it isn't trivial either.
Right now it lives in some odd places. Notably, `PhabricatorApplicationSearchEngine` has some weird helper methods for this stuff. Rather than give `EditEngine` the same set of weird helper methods, pull all this stuff out into "HTTPParameterTypes".
Future diffs will add "Projects" and "Users" types where all the custom parsing/lookup logic can live. Then eventually the Search stuff can reuse these.
Generally, this just breaks the code up into smaller pieces that have more specific responsibilities.
Test Plan: {F944142}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14402
Summary: See IRC. A user had a database set to 8 hours ahead of their web host. Try to catch and warn about these issues.
Test Plan: Artificially adjusted skew, saw setup warning.
Reviewers: avivey, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14371
Summary: Ref T9625. Some PHID types are missing application or icon specifications. This makes it easier to spot them.
Test Plan: {F906321}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9625
Differential Revision: https://secure.phabricator.com/D14323
Summary:
Currently, Version numbers are sort of randomly shown on "All Settings" beacuse we didn't have any better place to put them.
Now that we have modules, expose them as a config module.
Test Plan:
{F906426}
Grepped for "all settings" to look for other references to the old location, but didn't get any relevant hits.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14327
