Summary:
Pygments already supports Haskell and Objective-C syntax
highlighting, but the default in Phabricator excluded them from the
dropdown for the paste tool.
This adds Haskell and Objective-C to the default list of languages.
Test Plan:
Started up Phabricator sandbox instance, confirmed Haskell
and Objective-C worked in paste app.
Reviewers: vrana, epriestley
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3510
Summary:
People have occasionally complained about phabricator being slow. We have
the access log to look at to see when slowness happens, but it doesn't tell
us much about why it happened. Since it's usually a sporadic issue that's
reported, it's hard to reproduce and then profile. This change will allow us
to collect sampled profiles so we can look at them when slowness occurs.
Test Plan:
checking that sampling works correctly:
- set rate to 0; do several page loads; check no new entries in table
- set rate to 1; check that there's a new row in the table for each page load
- set rate to 10; check that some requests write to table and some don't
check new ui for samples:
- load /xhprof/list/all/, see a list with a lot of samples
- load /xhprof/list/sampled/, see only sampled runs
- load /xhprof/list/manual/, see only non-sampled runs
- load /xhprof/list/my-runs/, se only my manual runs
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3458
Summary: Rehash of D3411. In cgi/fcgi setups we have no idea if the request is HTTP or HTTPS as far as I can tell, so make this config-triggered again. Also handle @vrana's "off" case.
Test Plan: Set this flag, observed redirect to https when `$_SERVER['HTTPS']` was absent.
Reviewers: nh, vrana
Reviewed By: nh
CC: aran
Differential Revision: https://secure.phabricator.com/D3420
Summary: this is useful for certain workflows, typically where the reviewer is a gatekeeper of sorts who does the acutal commit. Special thanks to D2900 which made this relatively brain-dead to code up.
Test Plan: set to "true" in my local development environment and verified test user "xerxes" could close my stuff
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1732
Differential Revision: https://secure.phabricator.com/D3398
Summary:
I like systems that just work. It is possible to store files larger than max_allowed_packet in MySQL and we shouldn't demand it.
It also fixes a problem when file was smaller than `storage.mysql-engine.max-size` but its escaped version was larger than `max_allowed_packet`.
Test Plan: Reduced the size to 5e4, uploaded 90 kB file, checked the queries in DarkConsole, downloaded the file.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3392
Summary:
We have this hybrid "create / last few pastes" landing screen right now but I ~never use the list at the bottom and it makes the controller kind of complicated. I want to let you edit pastes too, and this generally simplifies things.
Also makes the textarea monospaced and cleans up the fork logic a bit.
Test Plan: Created, forked pastes. Viewed paste lists. Viewed pastes.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1690
Differential Revision: https://secure.phabricator.com/D3375
Summary: Allow custom LDAP port to be defined in config file
Test Plan: Test login works by specifying a custom port
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3153
Summary: The Log and PID directory should be separable in the config file
Test Plan: Start the daemons, and check if the pid and log files are stored in directories that were specified in the config file.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3149
Summary:
- These don't fit anywhere in the new design.
- Even if we figure out how to fit them in, 220px logos definitely won't fit on the 320px iPhone screen so anyone who has a custom logo will have to rework them anyway.
- Kill it for now, and once we get the new design in and working maybe we can restore it somehow.
Test Plan: Loaded local install, no logo. Grepped for config.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3101
Summary:
In some cases, we shell out to things (like Pygments for syntax highlighting).
However, on cloud servers or shared web servers, those binaries aren't always
installed system-wide.
This patch allows for appending to the environment variable $PATH, to look for
other, non-default places for these binaries.
Test Plan:
* Copied the patch over to a test OpenShift instance and applied it.
* Added the path to my local copy of Pygments (pygmentize wasn't available on the system)
into the Phabricator config.
* Refreshed a Paste page, and saw colors.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3091
Summary:
- the current LDAP auth flow expects a DN to look like
cn=ossareh,ou=Users,dc=example,dc=com
- however many LDAP setups have their dn look something like
cn=Mike Ossareh,ou=Users,dc=example,dc=com
Test Plan:
Test if logins work with a LDAP setup which has cn=Full Name
instead of cn=username.
To test you should ensure you set the properties needed to
trigger the search before login as detailed in conf/default.conf.php
Reviewers: epriestley
CC: mbeck, aran, Korvin
Differential Revision: https://secure.phabricator.com/D3072
Summary:
As we work through @chad's redesign, one thing I want to do is improve the tablet/mobile experience.
Add a "device" behavior which sets a "device-phone", "device-tablet" or "device-desktop" class on the root div. The behavior (device names, width triggers) is mostly based on Bootstrap.
Also adds a preview viewport=meta tag, which makes the iPhone not scale the page like crazy and is a desirable end state, but currently makes the app less usable since things get cut off.
Test Plan:
Added some classes like this:
.device-desktop {
background: blue;
}
.device-tablet {
background: orange;
}
.device-phone {
background: yellow;
}
...and loaded the site on a desktop, iPad and iPhone. Resized the window. Got the right background color in all cases.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D3063
Summary: MetaMTA + daemons used to be pretty hard but @nh landed some patches a while ago that make it way eaiser. Back off the "ooh scary config" text in the documentation, since this option will just work for ~every install now.
Test Plan: Read it.
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1525
Differential Revision: https://secure.phabricator.com/D3037
Summary: In order to perform the searches on Windows 2003 Server Active Directory you have to set the LDAP_OPT_REFERRALS option to 0
Test Plan: Test if LDAP works with Windows 2003 AD
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3004
Summary: This keeps people in the correct To or CC field on multiplexed messages.
Test Plan:
with multiplexing on, checked that I received an email with me in the CC
field instead of the To field for a diff I'm CC'd on.
Reviewers: epriestley, jungejason, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2999
Summary: The Graph API exposes a new field, security_settings, which allows applications to see whether a user has enabled Secure Browsing. This diff adds a configuration setting to Phabricator which forces users to have Secure Browsing enabled when logging in via Facebook.
Test Plan: With the configuration setting off, verify that secure browsing does not affect the ability to log in. With the configuration setting on and secure browsing off, verify that the login attempts is rejected. Then verify that the login attempt succeeds when secure browsing is enabled.
Reviewers: epriestley
Reviewed By: epriestley
CC: arice, aran, Korvin
Maniphest Tasks: T1487
Differential Revision: https://secure.phabricator.com/D2964
Summary:
Currently, it's hard to debug performance issues on POST pages. Add flags to stop redirects and always collect profiles.
Also fix an issue with "all" profiles. This feature is mostly just for profiling DarkConsole itself and is rarely used, I think it's been broken for some time. There's no way to get to it with the UI.
NOTE: Some JS workflows don't stop on redirect because they use JS/AJAX redirects.
Test Plan: Enabled options, browsed, got stopped on redirects and had profiles generated. Disabled options and verified redirects and profiles work normally.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2990
Summary:
See T931. LLVM users would also prefer simpler mail, and have similarly harsh opinions about the current state of affairs.
Allow installs to disable the hint blocks if they don't want them.
Test Plan: Sent myself mail with these settings on/off, got mail with/without the blocks.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T931
Differential Revision: https://secure.phabricator.com/D2968
Test Plan: Displayed `.arcconfig` and verified that it is still highlighted.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2987
Summary: Add active-directory domain-based ldap authentication support
Test Plan: Tested on a live install against Active Directory on a Windows Server
Reviewers: epriestley
CC: aran, epriestley
Maniphest Tasks: T1496
Differential Revision: https://secure.phabricator.com/D2966
Summary:
See D818 for an older attempt at this. Support code has matured to the point where the patch is pretty straightforward.
@tido, this was a long-standing request from Aditya back in the day.
Test Plan: Used `reparse.php --herald` to send myself a bunch of emails with various patch configurations. Confirmed that limits are respected, reasonable errors arise when they're violated, etc. (Timeout is a little funky but that's out of scope here, I think.)
Reviewers: btrahan
Reviewed By: btrahan
CC: tido, aran
Maniphest Tasks: T456
Differential Revision: https://secure.phabricator.com/D2967
Summary: Allow the GC daemon to collect the new markup cache.
Test Plan: Ran gc daemon in "debug" mode, saw it collect cache entries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2947
Summary: This is a fairly contentious default that we can easily move to configuration.
Test Plan: Changed the default, changed my user setting, reverted my user setting, verified the "settings" page.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2935
Summary: Did exactly what @epriestley suggested in T1428#2.
Test Plan: Turn it on in your config, post a revision, accept it. Turn it off in your config, post a revision, can't accept it.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2900
Summary: Simplify FeedQuery by making it extend from PhabricatorIDPagedPolicyQuery
Test Plan: Looked at feed on home, projects, user profile, and called `feed.query`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2905
Summary: Related to D2873.
Test Plan: Specified it and verified that highlighting still works.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2874
Summary: Add a `notification.debug` setting that shows debug info in the browser. Also improve some logging/error handling stuff and fix a bug with host names.
Test Plan: {F13098}
Reviewers: jungejason, btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T944
Differential Revision: https://secure.phabricator.com/D2810
Summary:
Support the `--verbose` flag added in D2795 in `phd`. See T1389.
Also simplify argument generation a little bit.
Test Plan: Ran "nice" daemon with debug, daemon + verbose, daemon + no verbose.
Reviewers: vrana, jungejason, edward, aurelijus
Reviewed By: aurelijus
CC: aran
Maniphest Tasks: T1389
Differential Revision: https://secure.phabricator.com/D2797
Summary:
- Add a /notification/status/ page which shows server status.
- Remove various test controllers and routes.
- Make the "no notifications" message look better.
- Move port/URI configuration to config file.
Test Plan: Started server, hit /notification/status/, saw server status.
Reviewers: allenjohnashton, ddfisher, keebuhm, jungejason
Reviewed By: jungejason
CC: aran
Maniphest Tasks: T944
Differential Revision: https://secure.phabricator.com/D2756
Summary:
This is the first step in Phabricator internationalization.
It adds a translation selector and calls it at startup.
Installations can add custom selectors to override some texts.
We can add official translations in future.
Next step is to allow user to choose his translation which will override the global one.
This is currently used only for English plurals.
Test Plan: Displayed a diff with unit test error, verified that it says 'Detail' or 'Details' and not 'Detail(s)'.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D2753
Summary: Made it possible to link and unlink LDAP accounts with Phabricator accounts.
Test Plan:
I've tested this code locally and in production where I work.
I've tried creating an account from scratch by logging in with LDAP and linking and unlinking an LDAP account with an existing account. I've tried to associate the same LDAP account with different Phabricator accounts and it failed as expected.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, auduny, svemir
Maniphest Tasks: T742
Differential Revision: https://secure.phabricator.com/D2722
Summary: First diff in a series of diffs to add notifications to Phabricator. This is the notification application ONLY. This commit does not include the changes to other applications that makes them add notifications. As such, no notifications will be generated beyond the initial database import.
Test Plan: This is part of the notifications architecture which has been running on http://theoryphabricator.com for the past several months.
Reviewers: epriestley, btrahan, ddfisher
Reviewed By: epriestley
CC: allenjohnashton, keebuhm, aran, Korvin, jungejason, nh
Maniphest Tasks: T974
Differential Revision: https://secure.phabricator.com/D2571
Summary:
- The config is called "resource-path" and the script references "resource-path", but the actual value checked for is "resource-map".
- Use nonempty(), since defaulting with getEnvConfig() will give you null if the setting exists but is set to null. This default is nearly useless so maybe we should change it to use coalesce().
- Remove Celerity map initialization from warmup. We don't currently initialize the environment in warmup, and Celerity initialization now depends on the environment.
Test Plan: Ran patch locally and on FPM-Warmup.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: hsb, aran
Differential Revision: https://secure.phabricator.com/D2662
Summary:
We have custom static resources.
We currently include them in Phabricator's celerity resource map which is causing some pain - we need to regenerate the file without our custom resources before pushing upstream, we need to discard our changes before pulling from upstream and we need to rebuild with our changes to run Phabricator.
This diff allows writing and reading the map in other location.
The plan is this - I will run `celerity_mapper.php` twice - once to build Phabricator-only resources (to push to upstream) and once to build Phabricator + ours resoruces to put in our directory.
Better solution would be to create a map just with our resources and read and combine it with Phabricator resources.
But it is complicated because we have dependencies on Phabricator resources.
Test Plan:
`celerity_mapper.php webroot`
`celerity_mapper.php webroot ../facebook/src/__celerity_resource_map__.php`
Delete Phabricator's celerity map, set 'celerity.resource-path' and successfully load Phabricator.
Reviewers: epriestley, edward
Reviewed By: epriestley
CC: aran, Koolvin
Maniphest Tasks: T721
Differential Revision: https://secure.phabricator.com/D2630
Summary:
Allow allowed email addresses to be restricted to certain domains. This implies email must be verified.
This probably isn't QUITE ready for prime-time without a few other tweaks (better administrative tools, notably) but we're nearly there.
Test Plan:
- With no restrictions:
- Registered with OAuth
- Created an account with accountadmin
- Added an email
- With restrictions:
- Tried to OAuth register with a restricted address, was prompted to provide a valid one.
- Tried to OAuth register with a valid address, worked fine.
- Tried to accountadmin a restricted address, got blocked.
- Tried to accountadmin a valid address, worked fine.
- Tried to add a restricted address, blocked.
- Tried to add a valid address, worked fine.
- Created a user with People with an invalid address, got blocked.
- Created a user with People with a valid address, worked fine.
Reviewers: btrahan, csilvers
Reviewed By: csilvers
CC: aran, joe, csilvers
Maniphest Tasks: T1184
Differential Revision: https://secure.phabricator.com/D2581
Summary:
Allow installs to require users to verify email addresses before they can use Phabricator. If a user logs in without a verified email address, they're given instructions to verify their address.
This isn't too useful on its own since we don't actually have arbitrary email registration, but the next step is to allow installs to restrict email to only some domains (e.g., @mycompany.com).
Test Plan:
- Verification
- Set verification requirement to `true`.
- Tried to use Phabricator with an unverified account, was told to verify.
- Tried to use Conduit, was given a verification error.
- Verified account, used Phabricator.
- Unverified account, reset password, verified implicit verification, used Phabricator.
- People Admin Interface
- Viewed as admin. Clicked "Administrate User".
- Viewed as non-admin
- Sanity Checks
- Used Conduit normally from web/CLI with a verified account.
- Logged in/out.
- Sent password reset email.
- Created a new user.
- Logged in with an unverified user but with the configuration set to off.
Reviewers: btrahan, vrana, jungejason
Reviewed By: btrahan
CC: aran, csilvers
Maniphest Tasks: T1184
Differential Revision: https://secure.phabricator.com/D2520
Summary:
For package creation and deletion, send email to all the owners For
package modification, detect important fields such as owners and paths, and then
send out emails to all owners (including deleted owners and current owners)
Also start using transaction for package creation/deletion/modification.
Test Plan:
- tested mail creation and deletion
- tested modification to auditing enabled, primary owners, owners, paths
Reviewers: epriestley, nh, vrana
Reviewed By: epriestley
CC: prithvi, aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2470
Summary:
- Merge CommitTask daemon into PullLocal daemon. This is another artifact of past instability (and order-dependent parsers). We still publish to the timeline, although this was the last consumer. Long term we'll probably delete timeline and move to webhooks, since everyone who has asked about this stuff has been eager to trade away the durability and ordering of the timeline for the ease of use of webhooks. There's also no reason to timeline this anymore since parsing is no longer order-dependent.
- Add `phd start` to start all the daemons you need. Add `phd restart` to restart all the daemons you need. So cool~
- Simplify and improve phd and Diffusion daemon documentation.
Test Plan:
- Ran `phd start`.
- Ran `phd restart`.
- Generated/read documentation.
- Imported some stuff, got clean parses.
Reviewers: btrahan, csilvers
Reviewed By: csilvers
CC: aran, jungejason, nh
Differential Revision: https://secure.phabricator.com/D2433
Summary:
also fix some bugs where we weren't properly capturing the expiry value or scope of access tokens.
This code isn't the cleanest as some providers don't confirm what scope you've been granted. In that case, assume the access token is of the minimum scope Phabricator requires. This seems more useful to me as only Phabricator at the moment really easily / consistently lets the user increase / decrease the granted scope so its basically always the correct assumption at the time we make it.
Test Plan: linked and unlinked Phabricator, Github, Disqus and Facebook accounts from Phabricator instaneces
Reviewers: epriestley
Reviewed By: epriestley
CC: zeeg, aran, Koolvin
Maniphest Tasks: T1110
Differential Revision: https://secure.phabricator.com/D2431
Summary: I have a patch which makes uploads all fancy and adds progress bars, but document the landscape first since it's quite complicated.
Test Plan: Generated, read docs. Configured `storage.upload-size-limit` to various values.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T875
Differential Revision: https://secure.phabricator.com/D2381
Summary:
- This is only slightly useful for updating Differential, since DiffQuery (vs RawDiffQuery) already gets you most of what you need. The only thing is that DiffQuery returns the diff for one path only right now(and the SVN version is very "special"). Should be easy to fix in the Git/HG cases at least, though (or maybe just use RawDiffQuery to avoid the SVN mess).
- Added a "download raw diff" link.
Test Plan: Viewed Diffusion and raw commits for SVN, Mercurial and Git repositories.
Reviewers: vrana, btrahan, jungejason
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2350
Summary: Allow the default namespace to be set in configuration, so you can juggle multiple copies of sandbox test data or whatever.
Test Plan: Changed default namespace, verified web UI and "storage" script respect it.
Reviewers: btrahan, vrana, jungejason
Reviewed By: vrana
CC: aran
Maniphest Tasks: T345
Differential Revision: https://secure.phabricator.com/D2341
Summary:
This is mostly in an effort to simplify D2323. Currently, we load one image into the database by default. This is a weird special case that makes things more complicated than necessary.
Instead, use a disk-based default avatar.
Test Plan: Verified that a user without an image appears with the default avatar as a handle, in profile settings, and on their person page.
Reviewers: btrahan, vrana, edward, jungejason
Reviewed By: vrana
CC: aran
Maniphest Tasks: T345
Differential Revision: https://secure.phabricator.com/D2331
Summary:
I have no idea what I'm doing, but here's part of an elasticsearch engine. These things work:
- Indexing stuff (??)
- Searching for text/type?
- Reconstructing things??
All the complicated stuff doesn't work. I'm having a hard time figuring out the best way to model things because elasticsearch's documentation is not exactly the most complete or illuminating.
@amckinley, does this look sane-ish so far? Particularly, the /phabricator/<type>/<phid>/ URI scheme and how I've set up the relationships and fields in the documents?
How should I model the relationship and field queries? I want, like, an "equal" query but it seems like I've got "text" or "term" to work with and neither are exact match? And "term" doesn't consider PHIDs to be terms since they have hyphens in them?
I'll keep kind of slogging my way forward here but if you have valuable wisdom to share it would probably get me to a better end state much faster. The whole query construction phase is pretty much black magic to me.
Test Plan: nyancat
Reviewers: amckinley, vrana
Reviewed By: vrana
CC: jungejason, tuomaspelkonen, aran, 20after4, vrana
Differential Revision: https://secure.phabricator.com/D790
Summary:
- Add an "Administrators" policy.
- Allow "Public" to be completely disabled in configuration.
- Simplify unit tests, and cover the new policies.
Test Plan: Ran unit tests.
Reviewers: btrahan, vrana, jungejason
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D2238
Summary:
'cuz we need to be phamous!
V1 feature set
- posts
-- standard thing you'd expect - a title and a remarkup-powered body and...
-- "phame" title - a short string that can be used to reference the story. this gets auto-updated when you mess with the title.
-- configuration - for now, do you want Facebook, Disqus or no comments? this is a per-post thing but feeds from an instance-wide configuration
Please do toss out any must have features or changes.
Test Plan: played around with this bad boy like whoa
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, vrana
Maniphest Tasks: T1111
Differential Revision: https://secure.phabricator.com/D2202
Summary:
- Add an explicit multiplexing option, and enable it by default. This is necessary for Mail.app to coexist with other clients ("Re:" breaks outlook at the very least, and generally sucks in the common case), and allows users with flexible clients to enable subject variance.
- Add an option for subject line variance. Default to not varying the subject, so mail no longer says [Committed], [Closed], etc. This is so the defaults thread correctly in Gmail (not entirely sure this actually works).
- Add a preference to enable subject line variance.
- Unless all mail is multiplexed, don't enable or respect the "Re" or "vary subject" preferences. These are currently shown and respected in non-multiplex cases, which creates inconsistent results.
NOTE: @jungejason @nh @vrana This changes the default behavior (from non-multiplexing to multiplexing), and might break Facebook's integration. You should be able to keep the same behavior by setting the options appropriately, although if you can get the new defaults working they're probably better.
Test Plan:
Send mail from Maniphest, Differential and Audit. Updated preferences. Enabled/disabled multiplexing. Things seem OK?
NOTE: I haven't actually been able to repro the Gmail threading issue so I'm not totally sure what's going on there, maybe it started respecting "Re:" (or always has), but @cpiro and @20after4 both reported it independently. This fixes a bunch of bugs in any case and gives us more conservative set of defaults.
I'll see if I can buff out the Gmail story a bit but every client is basically a giant black box of mystery. :/
Reviewers: btrahan, vrana, jungejason, nh
Reviewed By: btrahan
CC: cpiro, 20after4, aran
Maniphest Tasks: T1097, T847
Differential Revision: https://secure.phabricator.com/D2206
Summary:
This is a somewhat common request, and far more difficult than necessary currently.
I think the field is useful enough to leave it default-enabled, but there's wide diversity in testing philosophy.
Test Plan: Verified "test plan" field appeared. Disabled config. Verified "test plan" field vanished.
Reviewers: btrahan, vrana, jungejason
Reviewed By: vrana
CC: aran, asouza
Differential Revision: https://secure.phabricator.com/D2193
Summary: For production servers, minify CSS and JS by stripping comments, whitespace, etc.
Test Plan: Looked at CSS/JS, it was much smaller.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T264
Differential Revision: https://secure.phabricator.com/D2034
Summary: A bunch of installs are doing this to varying degrees of success anyway, make it easier and nudge them toward a more consistent approach.
Test Plan: Set a custom logo, viewed normal and admin pages.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T700
Differential Revision: https://secure.phabricator.com/D2019
Summary:
This is in preparation for getting the "View Options" dropdown working on audits.
- Use Files to serve raw data so we get all the security benefits of the alternate file domain. Although the difficulty of exploiting this is high (you need commit access to the repo) there's no reason to leave it dangling.
- Add a "contentHash" to Files so we can lookup files by content rather than adding some weird linker table. We can do other things with this later, potentially.
- Don't use 'data' URIs since they're crazy and we can just link to the file URI.
- When showing a binary file or an image, don't give options like "show highlighted text with blame" or "edit in external editor" since they don't make any sense.
- Use the existing infrastructure to figure out if things are images or binaries instead of an ad-hoc thing in this class.
Test Plan: Looked at text, image and binary files in Diffusion. Verified we reuse existing files if we've already generated them.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1899
Summary: No reason to keep these out of the defaults, can be useful in web stuff.
Test Plan: Uploaded, viewed a .ico file.
Reviewers: btrahan, paularmstrong
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1883
Summary: This config controls which values are masked in darkconsole. Mask a couple more vaguely-secret values.
Test Plan: Looked at darkconsole "Config" tab.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1845
Summary:
We already generate patches, but currently attach them. Allow them to be inlined instead (optionally, up to a certain size).
Also allow selection between unified and git patches.
Test Plan: Set these options in my local config, sent out a diff.
Reviewers: btrahan, Makinde
Reviewed By: Makinde
CC: aran, epriestley
Maniphest Tasks: T874
Differential Revision: https://secure.phabricator.com/D1759
Summary:
The current approach of using a modal overlay dialog to create/edit inline
comments is pretty silly. Use an inline textarea instead.
This element isn't perfect and we have some mild modalness issues, but I think
it's better than the silly thing we've got going on right now. We can keep
poking it as people break it.
Test Plan:
- Created comments; submitted and undid them in empty and nonempty states.
Used undo for nonempty states + cancel.
- Edited comments; saved and canceled them. Used undo for changed state.
- Replied to comments; yada yada as above.
- Deleted comments.
- Did various modal trickery where I clicked "Reply" on something else with a
dialog already up, this very mildly glitches but I think it's not a big issue.
Reviewers: vrana, btrahan, Makinde, nh
Reviewed By: vrana
CC: aran, epriestley
Maniphest Tasks: T431
Differential Revision: https://secure.phabricator.com/D1716
Summary:
When users submit an audit, send email to relevant parties informing them.
Allow email to be replied to. Just basic support so far; no "!raise" stuff and
no threading with the Herald commit notification.
Test Plan: Made comments, got email. Replied to email, got comments.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1698
Summary:
adds a Phabricator OAuth server, which has three big commands:
- auth - allows $user to authorize a given client or application. if $user has already authorized, it hands an authoization code back to $redirect_uri
- token - given a valid authorization code, this command returns an authorization token
- whoami - Conduit.whoami, all nice and purdy relative to the oauth server.
Also has a "test" handler, which I used to create some test data. T850 will
delete this as it adds the ability to create this data in the Phabricator
product.
This diff also adds the corresponding client in Phabricator for the Phabricator
OAuth Server. (Note that clients are known as "providers" in the Phabricator
codebase but client makes more sense relative to the server nomenclature)
Also, related to make this work well
- clean up the diagnostics page by variabilizing the provider-specific
information and extending the provider classes as appropriate.
- augment Conduit.whoami for more full-featured OAuth support, at least where
the Phabricator client is concerned
What's missing here... See T844, T848, T849, T850, and T852.
Test Plan:
- created a dummy client via the test handler. setup development.conf to have
have proper variables for this dummy client. went through authorization and
de-authorization flows
- viewed the diagnostics page for all known oauth providers and saw
provider-specific debugging information
Reviewers: epriestley
CC: aran, epriestley
Maniphest Tasks: T44, T797
Differential Revision: https://secure.phabricator.com/D1595
Summary:
We don't use maniphest or phriction in our install, so the links/references to
them in tactical command and jump nav can be confusing for users. This hides
these elements if they aren't enabled.
Test Plan: loaded the front page of phabricator in my sandbox, saw they went
away
Reviewers: epriestley, btrahan, jungejason
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1636
"Content-Disposition: attachment"
Summary:
We currently serve some files off the primary domain (with "Content-Disposition:
attachment" + a CSRF check) and some files off the alternate domain (without
either).
This is not sufficient, because some UAs (like the iPad) ignore
"Content-Disposition: attachment". So there's an attack that goes like this:
- Alice uploads xss.html
- Alice says to Bob "hey download this file on your iPad"
- Bob clicks "Download" on Phabricator on his iPad, gets XSS'd.
NOTE: This removes the CSRF check for downloading files. The check is nice to
have but only raises the barrier to entry slightly. Between iPad / sniffing /
flash bytecode attacks, single-domain installs are simply insecure. We could
restore the check at some point in conjunction with a derived authentication
cookie (i.e., a mini-session-token which is only useful for downloading files),
but that's a lot of complexity to drop all at once.
(Because files are now authenticated only by knowing the PHID and secret key,
this also fixes the "no profile pictures in public feed while logged out"
issue.)
Test Plan: Viewed, info'd, and downloaded files
Reviewers: btrahan, arice, alok
Reviewed By: arice
CC: aran, epriestley
Maniphest Tasks: T843
Differential Revision: https://secure.phabricator.com/D1608
Summary:
I, as an author, sometimes forget branch associated with a revision.
Plus setting ##differential.show-host-field## makes a false sense of security
that branch will stay hidden so that I can name it
//finally_solve_this_crap_which_makes_no_sense//. But it is published in
Accepted and Request Changes e-mails anyway.
Test Plan: Display revision with disabled ##differential.show-host-field##.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1602
Summary:
The main purpose of this change is to allow selecting the branch by
triple-click.
Plus it is not perfectly clear that the text in brackets means branch.
Test Plan: Display revision.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1585
Summary:
See discussion in T838. These fields expose information which it isn't necessary
or useful to expose in the general case.
- Disable fields by default, allow them to be enabled in config (these fields
were useful for me at Facebook when I had access to all the machines).
- Remove 'sourcePath' from Conduit methods other than differential.query.
- Condition 'sourcePath' field in Conduit on the caller being the revision
author. This is a bit hacky but not so awful.
Test Plan:
- Verified fields are gone by default and restored by configuration.
- Verified Conduit no longer returns these fields other than
differential.query.
- Verified field presence/absence according to authorship in
differential.query.
- Grepped around in arcanist to make sure we aren't relying on sourcePath.
There's a workflow in "arc merge" that technically might hit it, but I think
it's unreachable, definitely irrelvant (we never use source path as a
distinguisher under git/hg, and can't 'arc merge' in SVN) and it's going away
Real Soon Now anyway.
Reviewers: btrahan, arice
Reviewed By: arice
CC: aran, epriestley
Maniphest Tasks: T838
Differential Revision: https://secure.phabricator.com/D1582
Summary: ##/\.l?hs$/## files are sensitive to changes in whitespace
Test Plan: what, me worry?
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1482
Summary:
We retried if a db connection was lost when executing a query, but not when
establishing a connection. I've seen a lot of failures establishing connections
in our install (they go away when retrying), so this diff retries when
establishing connections, and logs when we retry.
Test Plan:
- Loaded phabricator in a sandbox
- Temporarily added a check in the try block to throw if there were still
retries (to test logging, retry logic)
Reviewers: epriestley, blair
Reviewed By: epriestley
CC: aran, btrahan
Differential Revision: https://secure.phabricator.com/D1460
Summary:
Rough cut of Drydock. This is very basic and doesn't do much of use yet (it
//does// allocate EC2 machines as host resources and expose interfaces to them),
but I think the overall structure is more or less reasonable.
== Interfaces
Vision: Applications interact with Drydock resources through DrydockInterfaces,
like **command**, **filesystem** and **httpd** interfaces. Each interface allows
applications to perform some kind of operation on the resource, like executing
commands, reading/writing files, or configuring a web server. Interfaces have a
concrete, specific API:
// Filesystem Interface
$fs = $lease->getInterface('filesystem'); // Constants, some day?
$fs->writeFile('index.html', 'hello world!');
// Command Interface
$cmd = $lease->getInterface('command');
echo $cmd->execx('uptime');
// HTTPD Interface
$httpd = $lease->getInterface('httpd');
$httpd->restart();
Interfaces are mostly just stock, although installs might add new interfaces if
they expose different ways to interact with resources (for instance, a resource
might want to expose a new 'MongoDB' interface or whatever).
Currently: We have like part of a command interface.
== Leases
Vision: Leases keep track of which resources are in use, and what they're being
used for. They allow us to know when we need to allocate more resources (too
many sandcastles on the existing hosts, e.g.) and when we can release resources
(because they are no longer being used). They also give applications something
to hold while resources are being allocated.
// EXAMPLE: How this should work some day.
$allocator = new DrydockAllocator();
$allocator->setResourceType('sandcastle');
$allocator->setAttributes(
array(
'diffID' => $diff->getID(),
));
$lease = $allocator->allocate();
$diff->setSandcastleLeaseID($lease->getID());
// ...
if ($lease->getStatus() == DrydockLeaseStatus::STATUS_ACTIVE) {
$sandcastle_link = $lease->getInterface('httpd')->getURI('/');
} else {
$sandcastle_link = 'Still building your sandcastle...';
}
echo "Sandcastle for this diff: ".$sandcastle_link;
// EXAMPLE: How this actually works now.
$allocator = new DrydockAllocator();
$allocator->setResourceType('host');
// NOTE: Allocation is currently synchronous but will be task-driven soon.
$lease = $allocator->allocate();
Leases are completely stock, installs will not define new lease types.
Currently: Leases exist and work but are very very basic.
== Resources
Vision: Resources represent some actual thing we've put somewhere, whether it's
a host, a block of storage, a webroot, or whatever else. Applications interact
through resources by acquiring leases to them, and then getting interfaces
through these leases. The lease acquisition process has a side effect of
allocating new resources if a lease can't be acquired on existing resources
(e.g., the application wants storage but all storage resources are full) and
things are configured to autoscale.
Resources may themselves acquire leases in order to allocate. For instance, a
storage resource might first acquire a lease to a host resource. A 'test
scaffold' resource might lease a storage resource and a mysql resource.
Not all resources are auto-allocate: the entry-level version of Drydock is that
you manually allocate a couple boxes and configure them through the web console.
Then, e.g., 'storage' / 'webroot' resources allocate on top of them, but the
host pool itself does not autoscale.
Resources are completely stock, they are abstract shells representing any
arbitrary thing.
Currently: Resource exist ('host' only) but are very very basic.
== Blueprints
Vision: Blueprints contain instructions for building interfaces to, (possibly)
allocating, updating, managing, and destroying a specific type of resource in a
specific location. One way to think of them is that they are scripts for
creating and deleting resources. For example, the LocalHost, RemoteHost and
EC2Host blueprints can all manage 'host' resources.
Eventually, we will support more types of resources (storage, webroot,
sandcastle, test scaffold, phacility deployment) and more providers for resource
types, some of which will be in the Phabricator mainline and some of which will
be custom.
Blueprints are very custom and specific to application types, so installs will
define new blueprints if they are making significant use of Drydock.
Currently: They exist but have few capabilities. The stock blueprints do nearly
nothing useful. There is a technically functional blueprint for host allocation
in EC2.
== Allocator
This is just the actual code to execute the lease acquisition process.
Test Plan: Ran "drydock_control.php" script, it allocated a machine in EC2,
acquired a lease on it, interfaced with it, and then released the lease. Ran it
again, got a fresh lease on the existing resource.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D1454
Summary:
Not all auto-generated files can include the magical
"generated" annotation for one reason or another, but they may follow
path rules. This patch allows files to be marked as automatically
generated by matching the path with a regular expression.
Test Plan:
Alter 'differential.generated-paths' setting in config.
Create a new diff that affects a file matching one of those regular
expressions. Verify that Differential marks it as automatically
generated and therefore probably not worth reviewing (in the same way as
the magical "generated" annotation.
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D1455
your own actions
Summary:
- Mail.app on Lion has cumbersome threading rules, see T782. Add an option to
stick "Re: " in front of all threaded mail so it behaves. This is horrible, but
apparently the least-horrible option.
- While I was in there, I added an option for T228.
Test Plan:
- Sent a bunch of threaded and unthreaded mail with varous "Re:" settings,
seemed to get "Re:" in the right places.
- Disabled email about my stuff, created a task with just me, got voided mail,
added a CC, got mail to just the CC.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, mkjones
Maniphest Tasks: T228, T782
Differential Revision: https://secure.phabricator.com/D1448
Summary: If a remote address has too many recent login failures, require they
fill out a captcha before they can attempt to login.
Test Plan: Tried to login a bunch of times, then submitted the CAPTHCA form with
various combinations of valid/invalid passwords and valid/invalid captchas.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley, jungejason
Maniphest Tasks: T765
Differential Revision: https://secure.phabricator.com/D1379
interfaces
Summary:
- We have a hard-coded minimum length of 3 right now (and 1 in the other
interface), which is sort of silly.
- Provide a more reasonable default, and allow it to be configured.
- We have two password reset interfaces, one of which no longer actually
requires you to verify you own the account. This is more than a bit derp.
- Merge the interfaces into one, using either an email token or the account's
current password to let you change the password.
Test Plan:
- Reset password on an account.
- Changed password on an account.
- Created a new account, logged in, set the password.
- Tried to set a too-short password, got an error.
Reviewers: btrahan, jungejason, nh
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T766
Differential Revision: https://secure.phabricator.com/D1374
Summary:
If you try to establish several sessions quickly (e.g., by running several
copies of "arc" at once, as in "arc x | arc y"), the current logic has a high
chance of making them all pick the same conduit session to refresh (since it's
the oldest one when each process selects the current sessions). This means they
all issue updates against "conduit-3" (or whatever) and one ends up with a bogus
session.
Instead, do an update against the table with the session key we read, so only
one process wins the race. If we don't win the race, try again until we do or
have tried every session slot.
Test Plan:
- Wiped conduit sessions, ran arc commands to verify the fresh session case.
- Ran a bunch of arc piped to itself, e.g. "arc list | arc list | arc list |
...". It succeeds up to the session limit, and above that gets failures as
expected.
- Manually checked the session table to make sure things seemed reasonable
there.
- Generally ran a bunch of arc commands.
- Logged out and logged in on the web interface.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T687
Differential Revision: https://secure.phabricator.com/D1329
Summary:
If a page generates warnings or errors, you only get a little red dot in
DarkConsole which is hard to see. DarkConsole is also fairly big and there are
plenty of reasons not to leave it open all the time.
Instead, unconditionally show a big message to developers if there are errors or
warnings.
We could make this more sophisticated eventually, but the value is just that you
see it.
Test Plan: Browsed pages with and without warnings, got the right banner state.
Reviewers: nh, btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T734
Differential Revision: https://secure.phabricator.com/D1307
Summary: use js format to display .arcconfig
Test Plan: verified that .arcconfig is highlighted
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1284
Summary:
- For context, see T547. This is the last (maybe?) in a series of diffs that
moves us off raw sha1() calls in order to make it easier to audit the codebase
for correct use of hash functions.
- This breaks CSRF tokens. Any open forms will generate an error when
submitted, so maybe upgrade off-peak.
- We now generate HMAC mail keys but accept MAC or HMAC. In a few months, we
can remove the MAC version.
- The only remaining callsite is Conduit. We can't use HMAC since Arcanist
would need to know the key. {T550} provides a better solution to this, anyway.
Test Plan:
- Verified CSRF tokens generate properly.
- Manually changed CSRF to an incorrect value and got an error.
- Verified mail generates with a new mail hash.
- Verified Phabricator accepts both old and new mail hashes.
- Verified Phabricator rejects bad mail hashes.
- Checked user log, things look OK.
Reviewers: btrahan, jungejason, benmathews
Reviewed By: btrahan
CC: aran, epriestley, btrahan
Maniphest Tasks: T547
Differential Revision: 1237
Summary: See task; installs occasionally need to do this themselves, and a
script is much better than me telling them to truncate tables.
Test Plan:
Ran various flavors of this command:
- purge_cache.php
- purge_cache.php derp
- purge_cache.php --help
- purge_cache.php --all
- purge_cache.php --differential
- purge_cache.php --differential --maniphest
Then I verified the actual behavior:
- Visited a Differential revision with comments, observed cache update in
'Services' tab.
- Visited a Maniphest task with comments, observed cache update in 'Services'
tab.
- Reloaded a diff standalone view, got a cache update.
Reviewers: Makinde, btrahan, jungejason
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T676
Differential Revision: 1214
Summary: See comments. A few installs have remarked that their organizations
would prefer buttons labled "Submit" to buttons labeled "Clowncopterize".
Test Plan:
- In "serious" mode, verified Differential and Maniphest have serious strings,
tasks can not be closed out of spite, and reset/welcome emails are extremely
serious.
- In unserious mode, verified Differential and Maniphest have normal strings,
tasks can be closed out of spite, and reset/welcome emails are silly.
- This does not disable the "fax these changes" message in Arcanist (no
reasonable way for it to read the config value) or the rainbow syntax
highlighter (already removable though configuration).
Reviewers: moskov, jungejason, nh, tuomaspelkonen, aran
Reviewed By: moskov
CC: aran, moskov
Differential Revision: 1081
Summary:
Add possibility for not logged in users to browse and see Differential
revisions.
Test Plan:
Set 'differential.anonymous-access' config option to true, log out, you should
be able to browse Differential without logging back in.
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, epriestley, mareksapota
Differential Revision: 1044
Summary:
See T549. Under configurations where files are served from an alternate domain
which does not have cookie credentials, we use random keys to prevent browsing,
similar to how Facebook relies on pseudorandom information in image URIs (we
could some day go farther than this and generate file sessions on the alternate
domain or something, I guess).
Currently, we generate these random keys in a roundabout manner. Instead, use a
real entropy source and store the key on the object. This reduces the number of
sha1() calls in the codebase as per T547.
Test Plan: Ran upgrade scripts, verified database was populated correctly.
Configured alternate file domain, uploaded file, verified secret generated and
worked properly. Changed secret, was given 404.
Reviewers: jungejason, benmathews, nh, tuomaspelkonen, aran
Reviewed By: aran
CC: aran, epriestley
Differential Revision: 1036
transactional mail
Summary: See T571. SES refuses to deliver mail with this header and there are
various reports of other issues on the internet so I'm defaulting it to off.
Test Plan: Set config to true, tried to send mail, SES rejected it because of
"Precedence: bulk" header.
Reviewers: bmaurer, ola, jungejason, nh, aran
Reviewed By: aran
CC: aran, epriestley, bmaurer
Differential Revision: 1032
