Summary:
Ref T2683. This is closely related to "symbolicCommit", but has an inconsistent "name" on the end.
Also, `diffusion.searchquery` uses this parameter inconsistently.
Test Plan:
- `grep`ed for callsites.
- Ran searches in Git and Mercurial repositories.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2683
Differential Revision: https://secure.phabricator.com/D9091
Summary:
Ref T2683. This has no callsites, and the functionality is covered by the `initFromConduit` flag.
This simplifies the code and reduces then number of internal `diffusion.resolverefs` calls we make on, e.g., the Git repository page from 7 to 2.
Test Plan: Grepped for these symbols.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2683
Differential Revision: https://secure.phabricator.com/D9090
Summary: Ref T2683. Normally not a big deal, but if a readme has some codeblocks missing the cache can slow things down.
Test Plan:
- Verified we hit the cache.
- Verified TOC still works.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5028, T2683
Differential Revision: https://secure.phabricator.com/D9049
Summary:
Ref T2683. At least locally, browse views are now nearly instantaneous, even in Mercurial. We also fall back to what we were doing before if we miss or take too long, so this shouldn't make things very much worse even in extreme cases.
For a local `hg` repo, the time we spend pulling browse stuff has dropped from ~3,000ms to ~20ms. This is probably atypical, but not completely crazy or rigged or anything.
Test Plan: Viewed Git, Subversion and Mercurial repositories and observed dramatically better performance in Git and Mercurial as they took advantage of the cache.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, jhurwitz
Maniphest Tasks: T2683
Differential Revision: https://secure.phabricator.com/D9047
Summary:
Ref T2683. Further reduces query count of last modified loads; we're now at 11 instead of 200+.
(This works in SVN but could be further optimized.)
Test Plan:
Loaded SVN, Mercurial, Git:
{F34864}
{F34865}
{F34866}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, vrana, aran
Maniphest Tasks: T2683
Differential Revision: https://secure.phabricator.com/D5256
Summary:
Ref T3662. Releeph blocks users from requsting unparsed commits, but there's no real technical reason for this.
The `releephwork.getorigcommitmessage` method assumes data exists, but should be replaced with `diffusion.querycommits` anyway.
Test Plan: Ran `diffusion.querycommits`. Requested a commit.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3662
Differential Revision: https://secure.phabricator.com/D8823
Summary:
Via HackerOne. In regular expressions, "$" matches "end of input, or before terminating newline". This means that the expression `/^A$/` matches two strings: `"A"`, and `"A\n"`.
When we care about this, use `\z` instead, which matches "end of input" only.
This allowed registration of `"username\n"` and similar.
Test Plan:
- Grepped codebase for all calls to `preg_match()` / `preg_match_all()`.
- Fixed the ones where this seemed like it could have an impact.
- Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aran, epriestley
Differential Revision: https://secure.phabricator.com/D8516
Summary:
- Fixes T4588.
- See D8501.
- Adds a "Tags" field for Herald commit emails.
- Fixes a bug in `tagsquery` when filtering by commit name.
- Make `tagsquery` just return nothing instead of fataling against Mercurial/Subversion.
Test Plan: Used `bin/repository/reparse.php --herald` to exercise this code.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aran, epriestley
Maniphest Tasks: T4588
Differential Revision: https://secure.phabricator.com/D8502
Summary: see title. Fixes T4549.
Test Plan: made a readme that had some headers and observed a nice ToC
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: aran, epriestley, Korvin
Maniphest Tasks: T4549
Differential Revision: https://secure.phabricator.com/D8490
Summary:
Ref T4387. By using `hg locate` to attempt to only list files in the given path
browsing diffusion is a bit faster. In a repo of about 600M it shaves a rough 100ms
off viewing the root of the project.
Test Plan: Looked around in diffusion and saw it showed everything including .files, which was nice
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4387
Differential Revision: https://secure.phabricator.com/D8163
Summary:
Ref T156. Adds basic filename search support for Diffusion,
currently only for Git repositories.
This is preliminary, and it's up for discussion:
- is the UI in the right place;
- what should the search query syntax be (e.g. whether
to put `*`s in the beginning and end of it);
- how to best approach it for Mercurial and/or SVN;
- what's the cleanest result format for `lsquery` (I went
for the minimum necessary change to `DiffusionBrowseSearchController`).
Test Plan:
Browse to a repository in Diffusion, and use both
`Search File Names` and `Search File Content`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T156
Differential Revision: https://secure.phabricator.com/D8093
Summary:
Fixes T1353. Also some minor unrelated cleanup:
- `openTransaction()` / `saveTransaction()` exist now, fix TODOs.
- Fix some instructions.
- Make `diffusion.branchquery` return empty for SVN rather than fataling.
Test Plan:
- Added a branches rule.
- Ran a dry run against commits in different VCSes.
{F105574}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, Nopik
Maniphest Tasks: T1353
Differential Revision: https://secure.phabricator.com/D8086
Summary:
Fixes T4344. `diffusion.getcommits` is nasty old bad news. Implement a modern query method.
This method provides limit/paging in a somewhat abstract way so it's sort of ultramodern, but I didn't want the default behavior to return a million rows. I'll probably move more stuff toward this over time, now that cursor paging is pervasive. Here, we needed extra metadata (the identifier map) anyway.
Test Plan: Used console to execute command.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4344
Differential Revision: https://secure.phabricator.com/D8077
Summary:
Ref T4327. This is general cleanup since I was in this area of the code. Primarily, the Mercurial implementation here was completely broken and wrong:
- It returned only one branch, but a commit can be present on many branches.
- It did not account for multiple branch heads.
- It returned a result implying the branch head pointed at the queried commit, which is no consistent or accurate.
Simplify the amount of API we're dealing with by collapsing this method into the very similar `diffusion.branchquery` method.
Test Plan: Looked at mercurial and git repositories and commits, branch information seemed correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8003
Summary: Ref T4327. At some point these two very similar classes got introduced. Collapse `DiffusionBranchInformation` into the nearly identical `DiffusionRepositoryRef`, which enjoys slightly more generality and support.
Test Plan: Viewed branch overview and detail pages. Ran `repository refs` and `repository discover`. Grepped for removed symbols.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8002
Test Plan: Created comments with 'silent' both true and empty, received notifcation for only the latter.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7916
Summary:
Ref T4276. When a change is larger than 2GB, PHP can not read the entire change into a string, so Herald can not process it.
Additionally, we already have a time limit for practical reasons, but it's huge (probably incorrectly). To deal with these things:
- Add an optional byte limit to `diffusion.rawdiffquery`.
- Make the query with a 1GB limit.
- Reduce the diff timeout from 15 hours to 15 minutes.
- Add a "Changeset is enormous" field. This field is true for changes which are too large to process.
This generally makes behaviors more sane:
- We'll always make progress in Herald in a reasonable amount of time.
- Installs can write global rules to handle (or reject) these types of changes.
Test Plan: Set limit to 25 bytes instead of 1GB and ran test console on various changes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4276
Differential Revision: https://secure.phabricator.com/D7885
Summary: If `0` isn't an ancestor of the current branch, the `0::x` construction fails. This is uncommon, but not wildly unreasonable. The `ancestors()` construction is simpler anyway.
Test Plan: Viewed some `hg` repos locally (change history, file history) without anything suspicious cropping up.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7844
Summary: Ref T4195. Ref T2783. We have an old-school implementation of this; move it into a LowLevel query and make callers all run through Conduit. I need the LowLevel query for hooks, to implement an "is merge commit" Herald rule.
Test Plan:
- Ran query via Conduit for SVN, Mercurial, Git.
- Parsed a commit which closed a revision, attach/closed worked correctly.
- Browsed Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195, T2783
Differential Revision: https://secure.phabricator.com/D7808
Summary: There were a number of places that were generating nonsense queries for both hosted and non-hosted subversion repositories.
Test Plan: Attempted several activities in Diffusion with both a hosted and non-hosted subversion repository, including viewing various types of diffs and raw files.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7799
Summary:
Ref T615. Ref T4237. With `--debug`, Mercurial will echo an "ignoring untrusted configuration option" warning **to stdout** if `.hgrc` has the wrong owner.
However, we need `--debug` to make `{parents}` usable, at least until the patches I got into the upstream are widely deployed. So after getting `--debug` output, strip off any leading warnings.
These warnings should always be in English, at least, since we set `LANG` explicitly.
Test Plan: Unit tests. @asherkin, maybe you can confirm this? I can't actually get the warning, but I think my `hg` in PATH is just a bit out of date.
Reviewers: asherkin, btrahan
Reviewed By: asherkin
CC: asherkin, aran
Maniphest Tasks: T615, T4237
Differential Revision: https://secure.phabricator.com/D7784
Summary: Fixes T4223. The output of `ls-tree` is partially delimited by spaces
and partially delimited by `\t`. The code I added in D7744 to help debug the
issue in T4159 doesn't work properly for files with 7 or more bytes in their
filesize, because the internals use `%7s`.
Auditors: btrahan
Summary:
Ref T1493. Diffusion has some garbagey behavior for things we can't resolve. Common cases are:
- Looking at a branch that doesn't exist.
- Looking at a repository with no branches.
- Looking at a commit that doesn't exist.
- Looking at an empty repository.
In these cases, we generally fatal unhelpfully. I want to untangle this mess.
This doesn't help much, but does clean things up a bit. We currently have two separate query paths, "stablecommitname" and "expandshortcommit". These are pretty much doing the same thing -- taking some ref like "master" or "default" or a tag name or part of a commit name, and turning it into a full commit name. Merge them into a single "resolverefs" method.
This simplifies the code a fair bit, and gives us better error messages. They still aren't great, but they're like this now:
Ref "7498aec194ecf2d333e0e2baddd9d5cdf922d7f1" is ambiguous or does not exist.
...instead of just:
ERR-INVALID-COMMIT
Test Plan: Looked at Git, Mercurial and Subversion repositories that were empty and non-empty. Looked at branches/heads. Tried to look at invalid commits. Looked at tags. All of this still works, and some behaviors are a bit better than they used to be.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1493
Differential Revision: https://secure.phabricator.com/D7484
Summary: Fixes the junk I broke in D7484. Before that, tag content was a side effect of resolving the ref name. Now, fetch it explicitly in `diffusion.tagsquery`.
Test Plan: Looked at a tag, saw the annotation/message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7485
Summary: Ref T1493. Consolidate these a bit; they might need some more magic once we do `--noupdate` checkouts. Mostly just trying to clean up and centralize this code a bit.
Test Plan: Viewed and `bin/repository discover`'d Mercurial repos with and without any branches.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1493
Differential Revision: https://secure.phabricator.com/D7480
Summary:
Ref T2350. Fixes T2231.
- Adds log flags around discovery.
- Adds message flags for "needs update". This is basically an out-of-band hint to the daemons that a repository should be pulled sooner than normal. We set the flag when users push a revision, and expose a Conduit method that `arc land` will be able to use.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2350, T2231
Differential Revision: https://secure.phabricator.com/D7467
Summary: Ref T2230. This cleans up D7442, by using `git for-each-ref` everywhere we can, in a basically reasonable way.
Test Plan:
In bare and non-bare repositories:
- Ran discovery with `bin/repository discover`;
- listed branches on `/diffusion/X/`;
- listed tags on `/diffusion/X/`;
- listed tags, branches and refs on `/diffusion/rXnnnn`.
Reviewers: btrahan, avivey
Reviewed By: avivey
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7447
Summary:
Ref T2230. Although all the non-bare commands //run// fine in bare repos, not all of them do exactly the same thing.
This could use further cleanup, but at least get it working again for now.
Test Plan: Ran `bin/repository pull`, `bin/repository discover`, viewed Diffusion (looked at branch table), viewed a commit (looked at "Branches"), for bare and non-bare git repos.
Reviewers: avive, btrahan, avivey
Reviewed By: avivey
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7442
Summary:
Conduit doesn't currently have an analog to "shouldAllowPublic", so the recent policy checks added here caught legitimate Conduit calls when viewing Diffusion as a logged-out user.
Add `shouldAllowPublic()` and set it for all the Diffusion queries.
(More calls probably need this, but we can add it when we hit them.)
Test Plan: Looked at Diffusion as a logged-out user with public access enabled.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7380
Summary: Ref T603. Makes the majority of reads policy aware (and pretty much all the important ones).
Test Plan:
- Created a comment with `differential.createcomment`.
- Created a new revision with `arc diff` in order to exercise `differential.creatediff`.
- Created an inline comment with `differential.createinline`.
- Added a comment to a revision.
- Edited an inline comment.
- Edited a revision.
- Wrote "Depends on ..." in a summary, saved, verified link was created.
- Browsed a file in Diffusion.
- Got past the code I changed in the Releeph request thing.
- Edited a Releeph request.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7136
Summary: Ref T603. This swaps almost all queries against the repository table over to be policy aware.
Test Plan:
- Made an audit comment on a commit.
- Ran `save_lint.php`.
- Looked up a commit with `diffusion.getcommits`.
- Looked up lint messages with `diffusion.getlintmessages`.
- Clicked an external/submodule in Diffusion.
- Viewed main lint and repository lint in Diffusion.
- Completed and validated Owners paths in Owners.
- Executed dry runs via Herald.
- Queried for package owners with `owners.query`.
- Viewed Owners package.
- Edited Owners package.
- Viewed Owners package list.
- Executed `repository.query`.
- Viewed "Repository" tool repository list.
- Edited Arcanist project.
- Hit "Delete" on repository (this just tells you to use the CLI).
- Created a repository.
- Edited a repository.
- Ran `bin/repository list`.
- Ran `bin/search index rGTESTff45d13dffcfb3ea85b03aac8cc36251cacdf01c`
- Pushed and parsed a commit.
- Skipped all the Drydock stuff, as it it's hard to test and isn't normally reachable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7132
Summary: Ref T603. Make common repository queries (in Conduit and DiffusionRequest) policy-aware. These tend to get caugh by something else anyway, but tighten them up.
Test Plan: The conduit change already provided `user` everywhere. I verified that and browsed some pages.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7060
Summary: Broadly, I'm trying to modernize these views and fix UI and at least mitigate mobile problems. See discussion.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7042
Summary:
Adds most of Diffusion's commenting options available in the web UI
Mark method as deprecated immediately per @epriestley's request
Test Plan:
Used the Conduit web console to check:
* Lookup by PHID works
* Error is raised if commit by PHID is not found
* "action" validation works and raises appropriate error
* "message" raises error if empty
* Actions to raise concern or accept commit work
* Method is marked as deprecated from the start
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6923
Summary: Fixes T3697. Currently, we don't pass "branch" implicitly, so, e.g., when viewing a branch you don't get the right commit hash when looking up the README.
Test Plan: Viewed a non-`master` branch with a README, no fatal. Poked around and couldn't find anything suspicious.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3697
Differential Revision: https://secure.phabricator.com/D6734
Summary:
Ref T2784. Relatively complicated one as this bad boy is used in a repository daemon.
While testing, I noticed bugs in the expandshortname query stuff. Those variables are private to the parent class so they need some setX love.
Also, was unable to find links to the "before" stuff, but made them by hand by looking at some of these T2784 diffs, browsing a file at a specific revision, then hacking the "before" variable to be some known commit that also touched the file. This produced sensical results. On the process of doing that I upgraded a query to use the proper policy query.
Test Plan: In git, mercurial, svn, verified on a commit page the "parents" showed up correctly. played around with ?before parameter on specific file browse page, with commits known to have interesting history and stuff looked good
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5988
Summary: Ref T2784. Also sneaks in a fix for branch query -- forgot to catch the unsupported VCS exception. One strange thing is I have test Phabricator repositories and the mercurial one is showing different data than git for the same commit. The data shown is consistent pre and post this diff though so its an existing issue. Also note the mercurial is an import of git so maybe its busted-ish?
Test Plan: viewed commits in mercurial, svn, and git that were merge commits. saw the right stuff in mercurial and git.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5985
Summary: Ref T2784
Test Plan: for each flavor of VCS, I loaded up the repository home page. verified I saw some parent action where appropos. next, clicked through to 'view history' and verified it loaded up A-OK.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5960
Summary: We need to be able to request history for more than the master branch (the default). This adds branch as an option to the API.
Test Plan: Test by sending recentcommitsbypath a non-master branch along with callsign.
Reviewers: epriestley, chad, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5967
Summary: Ref T2784. We need to always return array() here so the foreach doesn't crap out
Test Plan: chad - can you confirm this fixes the error? I have ref-heavy git repos it seems. should work though.
Reviewers: chad, epriestley
Reviewed By: chad
CC: aran, Korvin
Maniphest Tasks: T3215, T2784
Differential Revision: https://secure.phabricator.com/D5961
Summary: Ref T2784.
Test Plan: loaded up a git commit with refs and they showed up! loaded up a git commit without revs and nothing showed up.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5957
Summary: Ref T2784. This is a lower-level one from drequest so it gets the conditional initialization treatment. Consolidated SVN as well even though SVN is issuing database queries; I felt better about the code de-duplication despite the small performance hit when we could just query the DB directly in the SVN case.
Test Plan: browsed around my Phabricator repositories in Mercurial, Git, and SVN flavors. Looked good.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5956
Summary: Ref T2784.
Test Plan: loaded up my git and mercurial copies of Phabricator. Searched for "diff". Observed many results and pagination working correctly.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5955
Summary: Ref T2784. This one was a wee bit complicated. Had to add PhabricatorUser and concept of initFromConduit (or not) to DiffusionRequest.
Test Plan: foreach repo, visited CALLSIGN and clicked a commit and verified they laoded correctly. Hacked code to hit NOT via Conduit and repeated tests to great success.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5928
Summary: title does not say it all; also added conduit wrappers for rawdiffquery and lastmodifiedquery. These get the wrapper treatment since they are used in daemons. Ref T2784.
Test Plan: for each of the 3 VCS, did the following: 1) loaded up CALLSIGN and verified 'Modified' column data showed up correctly in Browse Repository box. 2) loaded up the "change" view for a specific file and verified content showed up correctly. 3) loaded up a specific commit and noted the changes ajax loaded A-OK
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5896
Summary: title. Ref T2784.
Test Plan: foreach of SVN, Mercurial, and Git, loaded up a repository. Verified that only git had a tags box and it showed up correctly. Went to CALLSIGN/tags and verified that only git had a tags box and it showed up correctly. Went to various commits across vcs and verified it said "none" unless it was a git commit that also was tagged.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5894
Summary: see title. Ref T2784.
Test Plan:
In diffusion, for each of SVN, Mercurial, and Git, I loaded up /diffusion/CALLSIGN/. I verified the README was displayed and things looked good. Next I clicked on "browse" on the top-most commit and verified things looked correct. Also clicked through to a file for a good measure and things looked good.
In owners, for each of SVN, Mercurial, and Git, I played around with the path typeahead / validator. It worked correctly!
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5883
Summary: Ref T2784. This is probably pretty good except the fancy lint error saver now issue serial queries via Conduit.
Test Plan: reparsed commits on 3 repos - yay. viewed readme from diffusion UI on 3 repos - yay. viewed file content from diffusion UI on 3 repos - yay.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5824
Summary: ref T2784. This one had a few fun spots where I had to move data around. Also, is there some common object (or should I add it?) that can do this toDictionary newFromConduit stuff? Also, this assumes D5803 is largely correct at the time of this diff.
Test Plan: browsed mercurial and git repository page. saw the branches i expected.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5810
Summary: le title. However, this also "is the first" conversion so sets the precedence for how this will all work. See comments in the code. I think this helps us keep the new code we're writing to a minimum. Wondering if the conduit end point could be more generic, and rather than have a switch statement on VCS type, one can just implement the "handleSubversion" version and have that called? Ref T2784
Test Plan: slapped an "or true" in the conditional protecting this code path. verified it worked on all 3 vcs systems, including typing in garbage and getting a 404
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5803
Summary: Fixes T2698. When applications are installed, their Conduit calls should drop out. This will also let us land Releeph without exposing Conduit calls.
Test Plan:
- Viewed Conduit console; uninstalled some applications and verified their calls dropped out.
- Tried to make an uninstalled call; got an appropriate error.
Reviewers: edward, btrahan
Reviewed By: edward
CC: aran
Maniphest Tasks: T2698
Differential Revision: https://secure.phabricator.com/D5302
Summary: Mostly applies a new call spacing rule; also a few things that have slipped through via pull requests and such
Test Plan: `find src/ -type f -name '*.php' | xargs -n16 arc lint --output summary --apply-patches`
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5002
