Summary:
Ref T7352. This changes `phd` to pass configuration to overseers over stdin. We still run one overseer per daemon.
The "status" stuff needs some cleanup, but it's mostly just UI/cosmetic.
Test Plan:
- Ran `phd debug`, `phd launch`, `phd start`, `phd status`, `phd stop`, etc.
- Verified PID files write in a reasonable format.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11855
Summary:
Ref T6941. In the cluster (and in other reasonable setups) we've separated SSH load balancers from HTTP load balancers.
In particular, ELBs will not let you load balance port 22, so this is likely a reasonable/common issue in larger clusters in AWS.
Allow users to specify an alternate host for SSH traffic.
Test Plan: Set host to someting different, saw it reflected in UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6941
Differential Revision: https://secure.phabricator.com/D11800
Summary:
Ref T7119. Three users have now reported that this causes their systems to hang, so it's looking like the cure is worse than the disease.
Revert this until we can eventually reproduce and understand the hang.
Test Plan: Users running into issues have reported that this resolves things.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7119
Differential Revision: https://secure.phabricator.com/D11644
Summary: Use `PhutilXHPASTBinary` methods instead of `xhpast_parse` functions. Depends on D11517.
Test Plan: N/A, this is a direct swap.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11612
Summary:
Ref T6881. This adds the worker, and a script to make it easier to test. It doesn't actually invoice anything.
I'm intentionally allowing the script to double-bill since it makes testing way easier (by letting you bill the same period over and over again), and provides a tool for recovery if billing screws up.
(This diff isn't very interesting, just trying to avoid a 5K-line diff at the end.)
Test Plan: Used `bin/phortune invoice ...` to get the worker to print out some date ranges which it would theoretically invoice.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11577
Summary: Fixes T7034. Like HTTP, proxy requests to the correct host if a repository has an Almanac service host.
Test Plan: Ran VCS requests through the proxy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7034
Differential Revision: https://secure.phabricator.com/D11543
Summary:
Ref T7034.
In a cluster environment, when a user connects with a VCS request over SSH (like `git pull`), the receiving server may need to proxy it to a server which can actually satisfy the request.
In order to proxy the request, we need to know which repository the user is interested in accessing.
Split the SSH workflow into two steps:
# First, identify the repository.
# Then, execute the operation.
In the future, this will allow us to put a possible "proxy the whole thing somewhere else" step in the middle, mirroring the behavior of Conduit.
This is trivially easy in `git` and `hg`. Both identify the repository on the commmand line.
This is fiendishly complex in `svn`, for the same reasons that hosting SVN was hard in the first place. Specifically:
- The client doesn't tell us what it's after.
- To get it to tell us, we have to send it a server capabilities string //first//.
- We can't just start an `svnserve` process and read the repository out after a little while, because we may need to proxy the request once we figure out the repository.
- We can't consume the client protocol frame that tells us what the client wants, because when we start the real server request it won't know what the client is after if it never receives that frame.
- On the other hand, we must consume the second copy of the server protocol frame that would be sent to the client, or they'll get two "HELLO" messages and not know what to do.
The approach here is straightforward, but the implementation is not trivial. Roughly:
- Start `svnserve`, read the "hello" frame from it.
- Kill `svnserve`.
- Send the "hello" to the client.
- Wait for the client to send us "I want repository X".
- Save the message it sent us in the "peekBuffer".
- Return "this is a request for repository X", so we can proxy it.
Then, to continue the request:
- Start the real `svnserve`.
- Read the "hello" frame from it and throw it away.
- Write the data in the "peekBuffer" to it, as though we'd just received it from the client.
- State of the world is normal again, so we can continue.
Also fixed some other issues:
- SVN could choke if `repository.default-local-path` contained extra slashes.
- PHP might emit some complaints when executing the commit hook; silence those.
Test Plan: Pushed and pulled repositories in SVN, Mercurial and Git.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7034
Differential Revision: https://secure.phabricator.com/D11541
Summary: Ref T7034. This is a second special case, like commit hooks, where we need some help from Phabricator to make instance identity knowable.
Test Plan: Connected to an instance and ran SSH commands.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7034
Differential Revision: https://secure.phabricator.com/D11539
Summary:
Fixes T7019. In a cluster environment, pushes currently fail because the commit hook can't identify the instance.
For web processes, the hostname identifies the instance -- but we don't have a hostname in the hook.
For CLI processes, the environment identifies the instance -- but we don't have an environment in the hook under SVN.
Promote the instance identifier into the upstream and pack/unpack it explicitly for hooks. This is probably not useful for anyone but us, but the amount of special-purpose code we're introducing is very small.
I poked at trying to do this in a more general way, but:
- We MUST know this BEFORE we run code, so the normal subclassing stuff is useless.
- I couldn't come up with any other parameter which might ever be useful to pass in.
Test Plan: Used `git push` to push code through proxied HTTP, got a clean push.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7019
Differential Revision: https://secure.phabricator.com/D11495
Summary: Unused at this point
Test Plan: Grep
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11506
Summary: Removes the 1x application icons, and uses the fonticons instead. Feed was only known location.
Test Plan:
feed, dashboards, grep for use
{F275636}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11496
Summary:
Ref T6881. This makes it easier to fire a trigger and make sure it works properly. You can use the `--now` flag to travel through time, and test scheduling conditions with `--last` and `--next`. It will tell you when the trigger would reschedule.
Better than waiting 24 hours to see if things work.
Test Plan: Fired some backups, got useful output which made me think my code probably works correctly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11438
Summary:
Fixes T5966. Accomplishes a few things
- see title
- adds a force-autoclose flag and the plumbing for it
- removes references to some HarborMaster thing that used to key off commits and seems long dead, but forgotten :/
Test Plan:
ran a few commands. These first three had great success:
`./repository reparse --all FIRSTREPO --message --change --herald --owners`
`./repository reparse --all FIRSTREPO --message --change --herald --owners --min-date yesterday`
`./repository reparse --all FIRSTREPO --message --change --herald --owners --min-date yesterday --force-autoclose`
...and these next two showed me some errors as expected:
`./repository reparse --all FIRSTREPO --message --change --herald --owners --min-date garbagedata`
`./repository reparse --all GARBAGEREPO --message --change --herald --owners`
Also, made a diff in a repository with autoclose disabled and commited the diff. Later, reparse the diff with force-autoclose. Verified the diff closed and that the reason "why" had the proper message text.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: joshuaspence, epriestley, Korvin
Maniphest Tasks: T5966
Differential Revision: https://secure.phabricator.com/D10492
Summary: Removes the docs sprite in Conpherence with FontAwesome, adds additional icons. Unsure what happens if someone customized this config option.
Test Plan: Added images and files to a Conpherence, saw new icons.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11028
Summary: Removes unused payments sprite and code, also some unused conpherence generated images. We use images in login (and could use FontAwesome, maybe).
Test Plan: grep codebase, pull up uiexamples icons page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11025
Summary: These were refactored out a while ago
Test Plan: Grep codebase, use Conpherence on desktop, mobile.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11023
Summary: Ref T6615. Ref T3554. We need better tooling around the queue eventually, so start here.
Test Plan: Added 100K+ tasks locally with `bin/worker flood`. Executed some of them with `bin/phd debug taskmaster` (we already have a TestWorker, used in unit tests).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3554, T6615
Differential Revision: https://secure.phabricator.com/D10894
Summary:
Ref T5833. This fixes a few weird things with this table:
- A bunch of columns were nullable for no reason.
- We stored an MD5 hash of the key (unusual) but never used it and callers were responsible for manually populating it.
- We didn't perform known-key-text lookups by using an index.
Test Plan:
- Ran migrations.
- Faked duplicate keys, saw them clean up correctly.
- Added new keys.
- Generated new keys.
- Used `bin/auth-ssh` and `bin/auth-ssh-key`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10805
Summary:
Ref T5833. Currently, SSH keys are associated only with users, and are a bit un-modern. I want to let Almanac Devices have SSH keys so devices in a cluster can identify to one another.
For example, with hosted installs, initialization will go something like this:
- A request comes in for `company.phacility.com`.
- A SiteSource (from D10787) makes a Conduit call to Almanac on the master install to check if `company` is a valid install and pull config if it is.
- This call can be signed with an SSH key which identifies a trusted Almanac Device.
In the cluster case, a web host can make an authenticated call to a repository host with similar key signing.
To move toward this, put a proper Query class on top of SSH key access (this diff). In following diffs, I'll:
- Rename `userPHID` to `objectPHID`.
- Move this to the `auth` database.
- Provide UI for device/key association.
An alternative approach would be to build some kind of special token layer in Conduit, but I think that would be a lot harder to manage in the hosting case. This gives us a more direct attack on trusting requests from machines and recognizing machines as first (well, sort of second-class) actors without needing things like fake user accounts.
Test Plan:
- Added and removed SSH keys.
- Added and removed SSH keys from a bot account.
- Tried to edit an unonwned SSH key (denied).
- Ran `bin/ssh-auth`, got sensible output.
- Ran `bin/ssh-auth-key`, got sensible output.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10790
Summary:
Ref T1191. Notable stuff:
- Adds `--disable-utf8mb4` to `bin/storage` to make it easier to test what things will (approximately) do on old MySQL. This isn't 100% perfect but should catch all the major stuff. It basically makes us pretend the server is an old server.
- Require utf8mb4 to dump a quickstart.
- Fix some issues with quickstart generation, notably special casing the FULLTEXT handling.
- Add an `--unsafe` flag to `bin/storage adjust` to let it truncate data to fix schemata.
- Fix some old patches which don't work if the default table charset is utf8mb4.
Test Plan:
- Dumped a quickstart.
- Loaded the quickstart with utf8mb4.
- Loaded the quickstart with `--disable-utf8mb4` (verified that we get binary columns, etc).
- Adjusted schema with `--disable-utf8mb4` (got a long adjustment with binary columns, some truncation stuff with weird edge case test data).
- Adjusted schema with `--disable-utf8mb4 --unsafe` (got truncations and clean adjust).
- Adjusted schema back without `--disable-utf8mb4` (got a long adjustment with utf8mb4 columns, some invalid data on truncated utf8).
- Adjusted schema without `--disable-utf8mb4`, but with `--unsafe` (got truncations on the invalid data).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10757
Summary:
Ref T4209. This creates storage for public keys against authorized hosts, such that servers can be authorized to make Conduit calls as the omnipotent user.
Servers are registered into this system by running the following command once:
```
bin/almanac register
```
NOTE: This doesn't implement authorization between servers, just the storage of public keys.
Placing this against Almanac seemed like the most sensible place, since I'm imagining in future that the `register` command will accept more information (like the hostname of the server so it can be found in the service directory).
Test Plan: Ran `bin/almanac register` and saw the host (and public key information) appear in the database.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D10400
Summary: The output from this script is too verbose... all that I care about is the overall progress.
Test Plan:
Ran the script on a large repository.
```lang=bash
./scripts/repository/reparse.php --all XYZ --message
NOTE: This script will queue tasks to reparse the data. Once the tasks have been queued, you need to run Taskmaster daemons to execute them.
QUEUEING TASKS (92,969 Commits):
[ ] 0.1%
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10441
Summary: Fixes T6006. These didn't get caught by D10392.
Test Plan: Forced migration to re-run; ran SSH commands against Phabricator.
Auditors: btrahan
Summary:
Ref T5885. See D10276.
Currently, ActionHeaders can only have minicons, and we don't use them anywhere and they probably don't make much sense in the product anymore.
Instead, allow them to have font icons. Remove minicons, which have no callsites and probably won't in the future.
Test Plan:
{F190925}
- Grepped for `minicons`.
- Grepped for `setHeaderIcon()`.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5885
Differential Revision: https://secure.phabricator.com/D10277
Summary:
Fixes T5770. This error occurs if you run `bin/storage upgrade` before you set up MySQL credentials.
This isn't what the setup guide says to do, but it's an easy mistake to make and should be a permitted install path since there's no reason you can't do things in this order.
Specifically, we use a mixture of "standard" (configured) and "administrative" (`--user` and `--password`) credentials, and if the standard ones are bogus bad things happen. We use the standard credentials to make some initialization order stuff easier, and because there's no `--host` flag and adding one would be silly, and because we only need administrative credentials to issue ALTER / CREATE statements.
Test Plan: Ran with bad standard credentials; ran with bad administrative credentials. Ran with good credentials.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5770
Differential Revision: https://secure.phabricator.com/D10199
Summary:
CanCDN flag indicates that a file can be served + cached
via anonymous content distribution networks.
Once D10054 lands, any files that lack the CanCDN flag
will require a one-time-use token and headers will
prohibit cache to protect sensitive files from
unauthorized access.
This diff separates the CanCDN changes from the code that
enforces these restrictions in D10054 so that the changes
can be tested and refined independently.
Test Plan: Work in progress
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: rush898, qgil, epriestley, aklapper, Korvin
Maniphest Tasks: T5685
Differential Revision: https://secure.phabricator.com/D10166
Summary: Fixes T5336. Currently, `PhabricatorWorkerLeaseQuery` is basically FIFO. It makes more sense for the queue to be a priority-queue, and to assign higher priorities to alerts (email and SMS).
Test Plan: Created dummy tasks in the queue (with different priorities). Verified that the priority field was set correctly in the DB and that the priority was shown on the `/daemon/` page. Started a `PhabricatorTaskmasterDaemon` and verified that the higher priority tasks were executed before lower priority tasks.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5336
Differential Revision: https://secure.phabricator.com/D9871
Summary: Most scripts detect the relevant workflows automatically. Some scripts, however, use a hardcoded list of workflows.
Test Plan: Ran `./bin/aphlict`, `./bin/cache` and `./bin/phd`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9564
Summary: Applied some more linter fixes that I previously missed because my global `arc` install was out-of-date.
Test Plan: Will run `arc unit` on another host.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9443
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary:
The docs are now a little out of date.
Also //possibly// we should call this `bin/notifications` or something, maybe?
Test Plan: read
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9398
Summary:
Replaces the icons with fonts from FontAwesome. Up in the air about the meme icon. Thoughts?
Also removed the second fullscreen/normal state. Seems obvious what it does, but assume someone complained previously?
Test Plan:
Tested all the icon states and made sure they still worked. Test fullscreen and help.
{F163485}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9385
Summary:
Ref T4045. Ref T5179. While we'll eventually need to force a migration, we can let installs (particularly large installs) do an online migration for now. This moves hunks to the new storage format one at a time.
(Note that nothing writes to the new store yet, so this is the only way to populate it.)
WARNING: Installs, don't run this yet! It won't compress the data. Wait until it can also do compression.
Test Plan: Added a `break;` after migrating one row and moved a few rows over. Spot checked them in the database and viewed the affected diffs.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4045, T5179
Differential Revision: https://secure.phabricator.com/D9291
Summary: These both work, but "git://" uses a nonstandard and possibly firewalled port, is less familiar to users, and is not promoted in the GitHub UI.
Test Plan: `grep`, reviewed diff.
Reviewers: chad, avive, avivey
Reviewed By: avivey
Subscribers: epriestley, avivey
Differential Revision: https://secure.phabricator.com/D9360
Summary: Point everything at the new canonical URI.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9328
Summary:
Updates policy, headers, typeaheads to FA over policy icons
Need advice - can't seem to place where icons come from on Typeahead? Wrong icons and wrong colors.... it is late
Test Plan:
- grepped for SPRITE_STATUS
- grepped for sprite-status
- grepped for setStatus for headers
- grepped individual icons names
Browsed numerous places, checked new dropdowns, see pudgy people.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4739
Differential Revision: https://secure.phabricator.com/D9179
Summary: The removes the sprite sheet 'icons' and replaces it with FontAwesome fonts.
Test Plan:
- Grep for SPRITE_ICONS and replace
- Grep for sprite-icons and replace
- Grep for PhabricatorActionList and choose all new icons
- Grep for Crumbs and fix icons
- Test/Replace PHUIList Icon support
- Test/Replace ObjectList Icon support (foot, epoch, etc)
- Browse as many pages as I could get to
- Remove sprite-icons and move remarkup to own sheet
- Review this diff in Differential
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9052
Summary:
Provides a working SMS implementation with support for Twilio.
This version doesn't really retry if we get any gruff at all. Future versions should retry.
Test Plan: used bin/sms to send messages and look at them.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: aurelijus, epriestley, Korvin
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D8930
Summary: These have all been obsolete for a reasonable amount of time, or are no longer relevant.
Test Plan: shrug~
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8941
Summary:
Ref T4749. Ref T3265. Ref T4909. Several goals here:
- Move user destruction to the CLI to limit the power of rogue admins.
- Start consolidating all "destroy named object" scripts into a single UI, to make it easier to know how to destroy things.
- Structure object destruction so we can do a better and more automatic job of cleaning up transactions, edges, search indexes, etc.
- Log when we destroy objects so there's a record if data goes missing.
Test Plan: Used `bin/remove destroy` to destroy several users.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3265, T4749, T4909
Differential Revision: https://secure.phabricator.com/D8940
Summary:
The mbstring extension for PHP is not a dependency to any of the already
listed packages on RHEL-like systems, and is needed by Phabricator
(showing a "install mbstring" message as the first thing if it is not
installed)
RHEL seems to have some extra steps to allow php-mbstring to be installed, though:
http://snippets.roozbehk.com/post/35750940300/php-mbstring-missing-on-red-hat-enterprise-linux-6
PS: disabled lint for this change because of the already >80 chars long "yum install" string
Test Plan:
* Created a new container with docker using both centos:6.4 and fedora:20 images
* Ran install script
* Started httpd and mysqld services
* Browsed to server's address
* Got error message
* Installed php-mbstring & restarted httpd
* Works
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8772
Summary: Ref T4780. This no longer works and barely ever worked. T4237 is now the relevant task.
Test Plan: Grepped for `reconcile.php`
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4780
Differential Revision: https://secure.phabricator.com/D8739
Summary: Fixes T3047. Update this document and remove some lies ("menu bar is read in admin interfaces"!!!!).
Test Plan:
- Read text.
- Searched for "System Agent" in the UI and replaced it with "bot" or "bot/script" or similar.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3047
Differential Revision: https://secure.phabricator.com/D8675
