Summary: Fixes T4241. Ref T4206. See T4241 for a description here. Generally, when we connect a fat pipe (`git-upload-pack`) to a narrow one (`git` over SSH) we currently read limitless data into memory. Instead, throttle reads until writes catch up. This is now possible because of the previous changes in this sequence.
Test Plan:
- Ran `git clone` and `git push` on the entire Wine repository.
- Observed CPU and memory usage.
- Memory usage was constant and low, CPU usage was high only during I/O (which is expected, since we have to actually do work, although thre might be room to further reduce this).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4241, T4206
Differential Revision: https://secure.phabricator.com/D7776
Summary: Ref T4189. Updates the Phabricator stuff to use the new, more sensible semantics from D7769. Basically, this works correctly now and doesn't need workarounds.
Test Plan: Pushed Wine repo in 1m13s.
Reviewers: btrahan, zeeg
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7770
Summary: This implements support for enforcing and setting policies in Phragment.
Test Plan: Set policies and ensured they were enforced successfully.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7751
Summary:
Ref T1049. See discussion in D7745. We have some specific interest in this for D7745, but generally we want to consume tasks with expired leases in roughly FIFO order, just like we consume new tasks in roughly FIFO order. Currently, when we select an expired task we order them by `id`, but this is the original insert order, not lease expiration order. Instead, order by `leaseExpires`.
This query is actually much better than the old one was, since the WHERE part is `leaseExpries < VALUE`.
Test Plan: Ran `EXPLAIN` on the query. Ran a taskmaster in debug mode and saw it lease new and expired tasks successfully.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7746
Summary:
Ref T4212. This implements snapshots in Phragment, which allows you to take a snapshot of a fragment at a given point in time, and download a ZIP of the snapshot as it was in this state.
There's also functionality for deleting and promoting snapshots. You can promote a snapshot to either the latest version or any other snapshot of the fragment.
Test Plan: Clicked around, took some snapshots, promoted them to different points and deleted snapshots. Also downloaded ZIPs of the snapshots and saw the right versions coming through for all the files downloaded.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205, T4212
Differential Revision: https://secure.phabricator.com/D7741
Summary:
This implements support for creating and updating fragments from ZIP files. It allows you to upload a ZIP via the Files application, create a fragment from it, and have it recursively imported into Phragment. Updating that folder with another ZIP will recursively create, update and delete files as appropriate.
The logic for creating and updating fragments from files has also been centralized into the PhragmentFragment class. Directories are also now supported; a directory fragment is simply a fragment that has no patches; thus a directory fragment can be converted to a file fragment by uploading a first patch for it.
Test Plan: Uploaded ZIP files through the interface and saw all of the fragments get created and updated as expected.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7729
Summary: Ref T4205. This is an initial implementation of Phragment. You can create and browse fragments in the system (but you can't yet view a fragment's patches / history).
Test Plan: Clicked around and created fragments.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7726
Summary:
If you do something like this:
// Missing $user->getPHID()!
$object->setUserPHID($user)->save();
...you get a very unhelpful exception:
Expected a scalar or null for %s conversion. Query: %s
This doesn't give you any hints about what's wrong. Instead, provide a more useful exception:
Unable to insert or update object of class DifferentialRevision, field 'title' has a nonscalar value.
Test Plan: {F87614}
Reviewers: hach-que, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7725
Summary: This adds a handful of 'Main Header' colors to change the look of Phabricator very slightly. I know I would probably set my dev header to a different color.
Test Plan: Tested each css class and color, can add more in the future.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7731
Summary: This implements support for explicitly marking the sequence of build steps. Users can now drag and re-order build steps in plans, and artifact dependencies are re-calculated so that if you move "Run Command" before "Lease Host", the "Run Command" step has it's artifact setting cleared and thus the step becomes invalid.
Test Plan: Re-ordered build steps and observed dependencies being correctly recalculated.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7715
Summary:
`PhabricatorPolicyFilter` has a bug right now where it lets through objects incorrectly if:
- the query requests two or more policies;
- the object satisfies at least one of those policies; and
- policy exceptions are not enabled.
This would be bad, but there's only one call in the codebase which satisfies all of these conditions, in the Maniphest batch editor. And it's moot anyway because edit operations get another policy check slightly later. So there is no policy/security impact from this flaw.
(The next diff relies on this behavior, which is how I caught it.)
Test Plan:
- Added a failing unit test and made it pass.
- Grepped the codebase for `requireCapabilities()` and verified that there is no security impact. Basically, 99% of callsites use `executeOne()`, which throws anyway and moots the filtering.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7721
Summary:
Ref T4195. This log serves two purposes:
- It's a log, so you can see what happened. Particularly, in Git/Hg, there is no other way to tell:
- Who //pushed// a change (vs committed / authored)?
- When was a change pushed?
- What was the old value of some tag/branch before someone destroyed it?
- We can hand these objects off to Herald to implement pre-commit rules.
This is a very basic implementation, but gets some data written and has a basic UI for it.
Test Plan: {F87339}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7705
Summary: This implements build targets as outlined in D7582. Build targets represent an instance of a build step particular to the build. Logs and artifacts have been adjusted to attach to build targets instead of build / build step pairs.
Test Plan: Ran builds and clicked around the interface. Everything seemed to work.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T1049
Differential Revision: https://secure.phabricator.com/D7703
Summary:
//(this diff used to be about applying policies to blueprints)//
This restructures Drydock so that blueprints are instances in the DB, with an associated implementation class. Thus resources now have a `blueprintPHID` instead of `blueprintClass` and DrydockBlueprint becomes a DAO. The old DrydockBlueprint is renamed to DrydockBlueprintImplementation, and the DrydockBlueprint DAO has a `blueprintClass` column on it.
This now just implements CAN_VIEW and CAN_EDIT policies for blueprints, although they are probably not enforced in all of the places they could be.
Test Plan: Used the `create-resource` and `lease` commands. Closed resources and leases in the UI. Clicked around the new and old lists to make sure everything is still working.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T2015
Differential Revision: https://secure.phabricator.com/D7638
Summary: Fixes T4149. This could be a little cleaner (configurable time limits, explicit timeout errors) but stop the major case of looping/infinite commands.
Test Plan: Added `sleep 5 &&` and set timeout to 1, saw an error + kill.
Reviewers: btrahan, skyronic
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4149
Differential Revision: https://secure.phabricator.com/D7651
Summary:
Ref T4038. This adds everything except the actual pushing part for mirrors.
This isn't the most beautiful or sophisticated UI, but I want get the authoritative repositories self-hosted and get users beta-ing hosting as soon as possible. We can do transactions, etc., later on.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4038
Differential Revision: https://secure.phabricator.com/D7632
Summary: Fixes T4122. Ref T2230. Instead of storing credentials on each repository, store them in Passphrase. This allows easy creation/management of many repositories which share credentials.
Test Plan:
- Upgraded repositories.
- Created and edited repositories.
- Pulled HTTP and SSH repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230, T4122
Differential Revision: https://secure.phabricator.com/D7629
Summary: Ref T4122. Add an edge to keep track of where a credential is used, and show it in the UI.
Test Plan:
See "Used By":
{F84099}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7628
Summary: ...and get the basic edit flow "working" for a new NuanceSourceDefinition - the Phabricator Form. ...and fix a dumb bug in the query class so when you redirect to the view page / try to edit an existing NuanceSource you don't fatal.
Test Plan: played around with the edit form and it worked!
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7585
Summary:
Ref T4122. Implements a credential management application for the uses described in T4122.
@chad, this needs an icon, HA HA HAHA HA BWW HA HA HA
bwahaha
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7608
Summary:
We've been having trouble with viewing diffs timing out when there's a lot of unit test failures. It was caused by formatting userdata for every single failure. The expensive part of this was actually creating the engine for every result, so moved the construction outside of the loop.
Diffs that timed out (2 min) loading before load in around 6 seconds now.
Test Plan: Loaded diffs that used to time out. Verified that details still looked right when Show Full Unit Test Results Is Clicked.
Reviewers: epriestley, keegancsmith, lifeihuang, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, andrewjcg
Differential Revision: https://secure.phabricator.com/D7581
Summary:
Ref T4110. This denormalized field used to power "Group By: Assigned" got dropped in the T2217 migration at some point.
Restore its population, and fix all the data in the database.
Test Plan: Ran migration, verified database came out reasonable-looking. Reassigned a task, verified database. Ran a "Group By: assigned" query.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4110
Differential Revision: https://secure.phabricator.com/D7602
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
- If you're an administrator and there are users waiting for approval, show a count on the home page.
- Sort out the `isUserActivated()` access check.
- Hide all the menu widgets except "Logout" for disabled and unapproved users.
- Add a "Log In" item.
- Add a bunch of unit tests.
Test Plan: Ran unit tests, clicked around as unapproved/approved/logged-in/logged-out users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Differential Revision: https://secure.phabricator.com/D7574
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary:
Ref T2230. The SVN protocol has a sensible protocol format with a good spec here:
http://svn.apache.org/repos/asf/subversion/trunk/subversion/libsvn_ra_svn/protocol
Particularly, compare this statement to the clown show that is the Mercurial wire protocol:
> It is possible to parse an item without knowing its type in advance.
WHAT A REASONABLE STATEMENT TO BE ABLE TO MAKE ABOUT A WIRE PROTOCOL
Although it makes substantially more sense than Mercurial, it's much heavier-weight than the Git or Mercurial protocols, since it isn't distributed.
It's also not possible to figure out if a request is a write request (or even which repository it is against) without proxying some of the protocol frames. Finally, several protocol commands embed repository URLs, and we need to reach into the protocol and translate them.
Test Plan: Ran various SVN commands over SSH (`svn log`, `svn up`, `svn commit`, etc).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7556
Summary:
Ref T2230. This is substantially more complicated than Git, but mostly because Mercurial's protocol is a like 50 ad-hoc extensions cobbled together. Because we must decode protocol frames in order to determine if a request is read or write, 90% of this is implementing a stream parser for the protocol.
Mercurial's own parser is simpler, but relies on blocking reads. Since we don't even have methods for blocking reads right now and keeping the whole thing non-blocking is conceptually better, I made the parser nonblocking. It ends up being a lot of stuff. I made an effort to cover it reasonably well with unit tests, and to make sure we fail closed (i.e., reject requests) if there are any parts of the protocol I got wrong.
A lot of the complexity is sharable with the HTTP stuff, so it ends up being not-so-bad, just very hard to verify by inspection as clearly correct.
Test Plan:
- Ran `hg clone` over SSH.
- Ran `hg fetch` over SSH.
- Ran `hg push` over SSH, to a read-only repo (error) and a read-write repo (success).
Reviewers: btrahan, asherkin
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7553
Summary:
Ref T2230. In Git, we can determine if a command is read-only or read/write from the command itself, but this isn't the case in Mercurial or SVN.
For Mercurial and SVN, we need to proxy the protocol that's coming over the wire, look at each request from the client, and then check if it's a read or a write. To support this, provide a more flexible version of `passthruIO`.
The way this will work is:
- The SSH IO channel is wrapped in a `ProtocolChannel` which can parse the the incoming stream into message objects.
- The `willWriteCallback` will look at those messages and determine if they're reads or writes.
- If they're writes, it will check for write permission.
- If we're good to go, the message object is converted back into a byte stream and handed to the underlying command.
Test Plan: Executed `git clone`, `git clone --depth 3`, `git push` (against no-write repo, got error), `git push` (against valid repo).
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, asherkin, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7551
Test Plan: This is one of the rare moments where unit tests for views would be useful.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7547
Summary:
Depends on D7519.
This implements support for build logs in Harbormaster. This includes support for appending to a log from the "Run Remote Command" build step.
It also adds the ability to cancel builds.
Currently the build view page doesn't update the logs live; I'm sure this can be achieved with Javelin, but I don't have enough experience with Javelin to actually make it poll from updates to content in the background.
{F79151}
{F79153}
{F79150}
{F79152}
Test Plan:
Tested this by setting up SSH on a Windows machine and using a Remote Command configured with:
```
C:\Windows\system32\cmd.exe /C cd C:\Build && mkdir Build_${timestamp} && cd Build_${timestamp} && git clone --recursive https://github.com/hach-que/Tychaia.git && cd Tychaia && Protobuild.exe && C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe Tychaia.Windows.sln
```
and observed the output of the build stream from the Windows machine into Phabricator.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7521
Summary:
I updated the wiki too - https://secure.phabricator.com/w/projects/pebkac/ - with what I am thinking right now. Rough plan here is
- next diff:
- implement editors and transactions
- implement "web type" for contact source
- /pebkac/item/new/ will be the entry point for this
- implement "actions" on a contact
- probably some "polish" on the scaffolding laid out here; like "create" permissions maybs
- diffs after that:
- implement "twitter" type for source
- implement email reply handler stuff for item and source
Probs a great time to blast huge holes in all this stuff. :D
Test Plan: these pages load and arc lint doesn't complain
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, chad
Differential Revision: https://secure.phabricator.com/D7465
Summary:
Ref T1049. Ref T2222. `DifferentialDiff` does not currently have a PHID, but we need it for Harbormaster and ApplicationTransactions. See some discussion in D7501.
(I split the SQL into two sections so we can't fail in the middle. At some point, I'd like to do a pass on the migration stuff and get this happening automatically, and also simplify the PatchList.)
Test Plan:
- Ran `bin/storage upgrade`.
- Checked for valid PHIDs in the database.
- Used `phid.query` to look up a diff by PHID.
- Created a new diff and verified it got a PHID.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran, vrana
Maniphest Tasks: T2222, T1049
Differential Revision: https://secure.phabricator.com/D7513
Summary:
Depends on D7498.
This implements support for a "build step implementation". Build steps have an associated class name (which makes the class in PHP) and a details field, which is serialized JSON (same as PhabricatorRepository).
This also implements a SleepBuildStepImplementation which just pauses the build for a specified period of seconds.
Test Plan:
Inserted a build step with `insert into harbormaster_buildstep (phid, buildPlanPHID, className, details, dateCreated, dateModified) values ('', 'PHID-HMCP-zkh5w6czfbfpk2gxwdeo', 'SleepBuildStepImplementation', '{"seconds":5}', NOW(), NOW());` (adjusting the build plan PHID as appropriate).
Started the daemon and applied the build plan to a buildable, and saw the daemon take a 5 second delay after creating `SleepBuildStepImplementation`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7499
Summary: The idea is to have all `phtize` definitions in applications to allow their separation.
Test Plan: Clicked View Options after mangling the translation.
Reviewers: epriestley
Reviewed By: epriestley
CC: btrahan, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7345
Summary: This allows users to set their HTTP access passwords via Diffusion interface.
Test Plan: Clicked the "Set HTTP Access Password" link, set a password and saw it appear in the DB.
Reviewers: #blessed_reviewers, hach-que, btrahan
Reviewed By: hach-que
CC: Korvin, epriestley, aran, jamesr
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7462
Summary:
`RepositoryStatusMessage` is basically a key/value table associated with a repository that I'm using to let the daemons store the most recent event of a given type, so we can easily show it on the status dashboard. I think this will be a lot easier for users to figure out than digging through logfiles.
I'm also going to write the "this needs a pull" status here eventually, for reducing the time lapse between pushes and discovery.
- Add storage for these messages.
- Have the pull engine populate the INIT phase. I'll do the FETCH phase next.
- Update the status readout to show all the various states.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7461
Summary:
Fixes T3416. Fixes T1733.
- Adds a flag to the commit table showing whether or not we have parsed it.
- The flag is set to `0` initially when the commit is discovered.
- The flag is set to `1` when the changes are parsed.
- The UI can now use the flag to distinguish between "empty commit" and "commit which we haven't imported changes for yet".
- Simplify rendering code a little bit.
- Fix an issue with the Message parser for empty commits.
- There's a key on the flag so we can do `SELECT * FROM repository_commit WHERE repositoryID = %d AND importStatus = 0 LIMIT 1` soon, to determine if a repository is fully imported or not. This will let us improve the UI (Ref T776, Ref T3217).
Test Plan:
- Ran `bin/storage upgrade -f`.
- Created an empty commit.
- Without the daemons running, ran `bin/repository pull GTEST` and `bin/repository discover GTEST`.
- Viewed web UI to get the first screenshot ("Still Importing...").
- Ran the message and change steps with `scripts/repository/reparse.php`.
- Viewed web UI to get the second screenshot ("Empty Commit").
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T776, T1733, T3416, T3217
Differential Revision: https://secure.phabricator.com/D7428
Summary: Like D7423, but for SSH.
Test Plan: Ran `git clone ssh://...`, got a clone.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7424
Summary:
- Add web UI for configuring SSH hosting.
- Route git reads (`git-upload-pack` over SSH).
Test Plan:
>>> orbital ~ $ git clone ssh://127.0.0.1/
Cloning into '127.0.0.1'...
Exception: Unrecognized repository path "/". Expected a path like "/diffusion/X/".
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/X/
Cloning into 'X'...
Exception: No repository "X" exists!
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/MT/
Cloning into 'MT'...
Exception: This repository is not available over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/P/
Cloning into 'P'...
Exception: TODO: Implement serve over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7421
Summary: No editing or view yet, just adds the schema and a policy default. Part of D7391.
Test Plan: `bin/storage upgrade`
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7415
Summary:
Gets rid of some old Differential-specific nonsense and replaces it with general runtime-pluggable Remarkup rules.
Facebook: This removes two options which may be in use. Have any classes being added via config here just subclass the new abstract bases instead. This should take 5 seconds to fix. You can adjust order by overriding `getPriority()` on the rules, if necessary.
Test Plan: See comments.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, andrewjcg, aran
Differential Revision: https://secure.phabricator.com/D7393
Summary: Makes a white hover icon show on the policy dropdown. Also fixed some spacing. Fixes T4017
Test Plan: hover over the policy dropdown
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4017
Differential Revision: https://secure.phabricator.com/D7388
Summary:
Ref T1049. I don't really want to sink too much time into this right now, but a seemingly reasonable architecture came to me in a dream. Here's a high-level overview of how things fit together:
- **"Build"**: In Harbormaster, "build" means any process we want to run against a working copy. It might actually be building an executable, but it might also be running lint, running unit tests, generating documentation, generating symbols, running a deploy, setting up a sandcastle, etc.
- `HarbormasterBuildable`: A "buildable" is some piece of code which build operations can run on. Generally, this is either a Differential diff or a Diffusion commit. The Buildable class just wraps those objects and provides a layer of abstraction. Currently, you can manually create a buildable from a commit. In the future, this will be done automatically.
- `HarbormasterBuildStep`: A "build step" is an individual build operation, like "run lint", "run unit", "build docs", etc. The step defines how to perform the operation (for example, "run unit tests by executing 'arc unit'"). In this diff, this barely exists.
- `HarbormasterBuildPlan`: This glues together build steps into groups or sequences. For example, you might want to "run unit", and then "deploy" if the tests pass. You can create a build plan which says "run step "unit tests", then run step "deploy" on success" or whatever. In the future, these will also contain triggers/conditions ("Automatically run this build plan against every commit") and probably be able to define failure actions ("If this plan fails, send someone an email"). Because build plans will run commands, only administrators can manage them.
- `HarbormasterBuild`: This is the concrete result of running a `BuildPlan` against a `Buildable`. It tracks the build status and collects results, so you can see if the build is running/successful/failed. A `Buildable` may have several `Build`s, because you can execute more than one `BuildPlan` against it. For example, you might have a "documentation" build plan which you run continuously against HEAD, but a "unit" build plan which you want to run against every commit.
- `HarbormasterBuildTarget`: This is the concrete result of running a `BuildStep` against a `Buildable`. These are children of `Build`. A step might be able to produce multiple targets, but generally this is something like "Unit Tests" or "Lint" and has an overall status, so you can see at a glance that unit tests were fine but lint had some issues.
- `HarbormasterBuildItem`: An optional subitem for a target. For lint, this might be an individual file. For unit tests, an individual test. For normal builds, an executable. For deploys, a server. For documentation generation, there might just not be subitems.
- `HarbormasterBuildLog`: Provides extra information, like command/execution transcripts. This is where stdout/stderr will get dumped, and general details and other messages.
- `HarbormasterBuildArtifact`: Stores side effects or results from build steps. For example, something which builds a binary might put the binary in "Files" and then put its PHID here. Unit tests might put coverage information here. Generally, any build step which produces some high-level output object can use this table to record its existence.
This diff implements almost nothing and does nothing useful, but puts most of these object relationships in place. The two major things you can't easily do with these objects are:
1) Run arbitrary cron jobs. Jenkins does this, but it feels tacked on and I don't know of anyone using it for that. We could create fake Buildables to get a similar effect, but if we need to do this I'd rather do it elsewhere in general. Build and cron/service/monitoring feel like pretty different problems to me.
2) Run parameterized/matrix steps (maybe?). Bamboo has this plan/stage/task/job breakdown where a build step can generate a zillion actual jobs, like "build client on x86", "build server on x86", "build client on ARM", "build server on ARM", etc. We can sort of do this by having a Step map to multiple Targets, but I haven't really thought about it too much and it may end up being not-great. I'd guess we have like an 80% chance of getting a clean implementation if/when we get there. I suspect no one actually needs this, or when they do they'll just implement a custom Step and it can be parameterized at that level. I'm not too worried about this overall.
The major difference between this and Jenkins/Bamboo/TravisCI is that all three of those are **plan-centric**: the primary object in the system is a build plan, and the dashboard shows you all your build plans and the current status. I don't think this is the right model. One disadvantage is that you basically end up with top-level messaging that says "Trunk is broken", not "Trunk was broken by commit af32f392f". Harbormaster is **buildable-centric**: the primary object in the system is stuff you can run build operations against (commits/branches/revisions), and actual build plans are secondary. The main view will be "recent commits on this branch, and whether they're good or not" -- which I think is what's most important in a larger/more complex product -- not the pass/fail status of all jobs. This also makes it easier and more natural to integrate with Differential and Diffusion, which both care about the overall status of the commit/revision, not the current status of jobs.
Test Plan: Poked around, but this doesn't really do anything yet.
Reviewers: btrahan
Reviewed By: btrahan
CC: zeeg, chad, aran, seporaitis
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7368
Summary: Ref T4010. Adds a history page and restores the transaction title strings, which previously sort-of existed in the defunct feed story class.
Test Plan: See screenshots.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7371
