Summary:
Fixes T11683. Likely as a result of the persitent connections change, more users are seeing MySQL connection limit errors.
The persistent connections change means we use //fewer// connections at the high end, but I'm guessing PHP is keeping some more connections around in the pool, so while high-traffic hosts use fewer connections, low-traffic hosts now use more.
Raise an explicit setup warning about this. Users should be adjusting it anyway, there's no value to leaving it at extremely low default and connections are baiscally free until you run out of outbound ports.
Test Plan: {F1844630}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11683
Differential Revision: https://secure.phabricator.com/D16586
Summary: Fixes T11676. Instead of trying to fit task titles to the display, truncate them and let the table scroll.
Test Plan:
Table now scrolls when cramped:
{F1843396}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11676
Differential Revision: https://secure.phabricator.com/D16583
Summary:
Fixes T11677. This makes two minor adjustments to the repository import daemons:
- The first step ("Message") now queues at a slightly-lower-than-default (for already-imported repositories) or very-low (for newly importing repositories) priority level.
- The other steps now queue at "default" priority level. This is actually what they already did, but without this change their behavior would be to inherit the priority level of their parents.
This has two effects:
- When adding new repositories to an existing install, they shouldn't block other things from happening anymore.
- The daemons will tend to start one commit and run through all of its steps before starting another commit. This makes progress through the queue more even and predictable.
- Before, they did ALL the message tasks, then ALL the change tasks, etc. This works fine but is confusing/uneven/less-predictable because each type of task takes a different amount of time.
Test Plan:
- Added a new repository.
- Saw all of its "message" steps queue at priority 4000.
- Saw followups queue at priority 2000.
- Saw progress generally "finish what you started" -- go through the queue one commit at a time, instead of one type of task at a time.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11677
Differential Revision: https://secure.phabricator.com/D16585
Summary:
Fixes T11675. This capability was erroneously (probably?) removed in D14766.
This search implementation (which uses exact match) probably isn't perfect for all cases of "text" fields, but empirically it seems to be what a significant number of users are after.
Test Plan:
Searched for a custom text field value.
{F1843383}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11675
Differential Revision: https://secure.phabricator.com/D16582
Summary:
- Allow proper parsing of attachments with missing Content-Disposition
header
Test Plan:
- Create application email for Maniphest.
- Send example broken email from Outlook 2007 to that address {F1842816}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16584
Summary:
Ref T11672. Depends on D16577. When establishing a connection from a webserver context, try to use persistent connections.
The hope is that this will fix outbound port exhaustion issues experienced on repository hosts handling large queue volumes.
Test Plan:
Added this to a page:
```lang=php
$tables = array(
new PhabricatorUser(),
new ManiphestTask(),
new DifferentialRevision(),
new PhabricatorRepository(),
new PhabricatorPaste(),
);
$ids = array();
foreach ($tables as $table) {
$conn = $table->establishConnection('r');
$cid = queryfx_one(
$conn,
'SELECT CONNECTION_ID() cid');
$ids[get_class($table)] = $cid['cid'];
}
var_dump($ids);
```
Reloaded the page a bunch of times and saw no reissued connections (the pool seems to keep a particular connection bound to a particular database), but did see connection reuse across requests.
That is, across reloads the same connection IDs appeared, but the same connection ID never appeared twice in the same request. This is what we want.
Also googled for issues with persistent connections, but everything I found was unconcerning and obscure (local variables and other very complex state that we don't use), and a bunch of the docs are reassuring (transactions, etc., get reset properly).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11672
Differential Revision: https://secure.phabricator.com/D16578
Summary: Fixes T10673. Set up Phurl to use Edit Engine. There's no way this is all I needed to do to get it working, so I'll be making another pass at it and testing more thoroughly...
Test Plan: Ran through the Phurl URL creation/edit/deletion process.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley, yelirekim
Maniphest Tasks: T10673
Differential Revision: https://secure.phabricator.com/D16573
Ref T11665.
Without `-n 1`, this logs the ENTIRE history of the repository. We
actually get the right result, but this is egregiously slow. Add `-n 1`
to return only one result.
It appears that I wrote this wrong way back in 2011, in D953. This
query is rarely used (until recently) which is likely why it has
escaped notice for so long.
Test Plan: Used Conduit console to execute `diffusion.rawdiffquery`.
Got the same results but spent 8ms instead of 200ms executing this
command, in a very small repository.
Summary:
The commit which added checks for the old homepage options (now in
Dashboard) in rP9d9a47e9cf, added them to the auth section, where they
would present:
This option has been migrated to the "Auth" application. Your old
configuration is still in effect, but now stored in "Auth" instead of
configuration. Going forward, you can manage authentication from the
web UI.
Remove them from the moved-to-Auth list, and coalesce the multiple
definitions of the help text into one.
Test Plan:
- set maniphest.priorities.unbreak-now to something
- observe the setup issue reported
- hope it tells you the right thing
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley, chad
Differential Revision: https://secure.phabricator.com/D16576
Summary:
Ref T11665. Currently, when a repository hits an error, we retry it after 15s. This is correct if the error was temporary/transient/config-related (e.g., bad network or administrator setting up credentials) but not so great if the error is long-lasting (completely bad authentication, invalid URI, etc), as it can pile up to a meaningful amount of unnecessary load over time.
Instead, record how many times in a row we've hit an error and adjust backoff behavior: first error is 15s, then 30s, 45s, etc.
Additionally, when computing the backoff for an empty repository, use the repository creation time as though it was the most recent commit. This is a good proxy which gives us reasonable backoff behavior.
This required removing the `CODE_WORKING` messages, since they would have reset the error count. We could restore them (as a different type of message), but I think they aren't particularly useful since cloning usually doesn't take too long and there's more status information avilable now than there was when this stuff was written.
Test Plan:
- Ran `bin/phd debug pull`.
- Saw sensible, increasing backoffs selected for repositories with errors.
- Saw sensible backoffs selected for empty repositories.
Reviewers: chad
Maniphest Tasks: T11665
Differential Revision: https://secure.phabricator.com/D16575
Summary:
Ref T11665. Fixes T7865. When we restart the daemons, the repository pull daemon currently resets the cooldowns on all of its pulls. This can generate a burst of initial load when restarting a lot of instance daemons (as in the Phacility cluster), described in T7865. This smooths things out so that recent pulls are considered, and any repositories which were waiting keep waiting.
Somewhat counterintuitively, hosted repositories write `TYPE_FETCH` status messages, so this should work equally well for hosted and observed repositories.
This also paves the way for better backoff behavior on repository errors, described in T11665. The error backoff now uses the same logic that the standard backoff does. The next change will make backoff computation consider recent errors.
(This is technically too large for repositories which have encountered one error and have a low commit rate, but I'll fix that in the following change; this is just a checkpoint on the way there.)
Test Plan: Ran `bin/phd debug pull`, saw the daemon compute reasonable windows based on previous pull activity.
Reviewers: chad
Maniphest Tasks: T7865, T11665
Differential Revision: https://secure.phabricator.com/D16574
Summary: Ref T8628.
Test Plan: Performed an action that uses the redirect controller (trying to visit a repo page while not logged in). Logged in and was redirected as expected
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T8628
Differential Revision: https://secure.phabricator.com/D16571
Summary: Ref T8628
Test Plan: Updated DarkConsoleDataController and observed that the darkconsole still works as expected
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley, yelirekim
Maniphest Tasks: T8628
Differential Revision: https://secure.phabricator.com/D16570
Summary: Fixes T11642. Added a 'name' field to the results from harbormaster.build.search.
Test Plan: Went to `/conduit/method/harbormaster.build.search/` and ran a search that would yield results (because otherwise there will be nothing there). Noted that there was, in fact, a name in the results.
Reviewers: yelirekim, #blessed_reviewers, epriestley
Reviewed By: yelirekim, #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T11642
Differential Revision: https://secure.phabricator.com/D16569
Summary: I believe these are left over from widgets, when we added a "Files" widget that kept track of everything added to the window.
Test Plan: Added files to a Conpherece, Set an image when editing. Anything else?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16567
Summary: Roughly, if user isn't in any rooms, search for joinable ones. If no results, show big NUX banner.
Test Plan: Left all rooms, got fallback, joined room, left room. Create new instance, see new NUX. Set instance to public, visit Conpherence with and without public rooms.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16563
Summary: [Draft] Posting this up because feed is pulling `getTitle` and not `getTitleForFeed` and I'm super confused. Restarted phd and apache.
Test Plan: Create a new room, see link in feed. Change topic, see story, add people, don't see story.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11645
Differential Revision: https://secure.phabricator.com/D16561
Summary:
Ref T11650. Currently, we load packages and then discard the archived ones.
However, this gets "dominion" rules (where a more-general package gives up ownership if a more-specific package exists) wrong if the more-specific package is archived: we incorrectly give up ownership.
Instead, just ignore these packages completely when loading affected packages. This is slightly simpler.
(There are technically two pieces of code we have to do this for, which should be a single piece of code but which haven't yet been unified.)
Test Plan:
- Created packages:
- Package A, on "/" (strong dominion, autoreview).
- Package B, on "/x/" (weak dominion, autoreview).
- Package C, on "/x/y" (archived, autoreview).
- Create a revision affecting "/x/y".
- Saw correct path ownership in table of contents ("B", strongest package only).
- Saw correct autoreview behavior (A + B).
- (Prior to patch, in `master`, reproduced the problem behaviors described in T11650, with bad dominion rules and failure to autoreview B.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11650
Differential Revision: https://secure.phabricator.com/D16564
Summary: We no longer have widgets, don't need these calls for simplicity.
Test Plan: Add a user to a room, remove a user from a room. Grep for `needWidgetData`
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16562
Summary: Mostly quality of life in renames and moving everything to the view class. Minor CSS tweaks. Fix room handles getting added when adding a new user.
Test Plan: Add to room, remove from room.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16560
Summary:
Ref T10747.
- Remove the warning dialog since these files don't seem to do anything confusing/problematic in Calendar.app or Google Calendar. Those importers generally need to be defensive about how they handle random ".ics" files from arbitrary third parties anyway, and this makes testing imports easier since we have a GET-table ".ics" URI for public events.
- Attach ".ics" files to email.
Test Plan:
- Clicked "Export as .ics", got an ICS file.
- Used "bin/mail show-outbound" to review an ICS attachment, although I don't actually have real mail set up locally so this may still be a little funky.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16559
Summary: Ref T10747. This exports these sections when generating an ".ics" file.
Test Plan: {F1832214}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16558
Summary: Darkens the topic, adds fun colors to action icons.
Test Plan: Hover over new action icons. See darker topic text.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16556
Summary: These three files are already in core. Don't re-package them.
Test Plan: reload
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16555
Summary: Ref T10747. Allows you to grab an event as a (basic) ICS file.
Test Plan:
- Exported a normal event.
- Exported an all-day event.
{F1830577}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16553
Summary:
Minor rebuild / redesign of Conpherence. Most of this is new UX and tossing out things like widgets, device fallbacks. I expect some of the UI to get more polished after next pass, but most everything here is in place.
- Removed "Widgets", now just a single Participants pane
- Added "Topic"
- New header
- Settings, Edit are action icons
- Removed a lot of JS
- Simplified CSS as much as I could
Test Plan:
Desktop, Tablet, Mobile. Adding and removing people. Setting new topics, new rooms.
{F1828662}
{F1828669}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16550
Summary: These floats were wonky in FF, adding some hardening to make sure they clear.
Test Plan:
Firefox, Chrome, IE.
{F1815981}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16547
Summary: We currently try to build crumbs out even if the user has no membership in any. This removes these useless controls.
Test Plan: Leave all Rooms, see NUX state with no "Edit Room", blank title, or "Collapse Column" controls.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16546
Summary:
Fixes T11586. First pass at a class for displaying invisible characters. Still need to:
- Write a couple unit tests
- Add some styling to the .invisible-special spans
- Actually start using the class when displaying form errors to users
Currently this makes the string `"\nab\x00c\x01d\te\nf"` look like:
{F1812711}
Test Plan:
Unit tests all pass and run in <1ms:
{F1812998}
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley, yelirekim
Maniphest Tasks: T11586
Differential Revision: https://secure.phabricator.com/D16541
Summary: This adds a "column" icon into crumbs, like in workboards, for expanding or hiding the "Widget Pane". This is per user sticky and defaults to off.
Test Plan: View a Conpherence Room, see no widgets by default. Toggle it on, see widget. Reload page, see widget stick. Verify mobile, tablets ignore hiding.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10364
Differential Revision: https://secure.phabricator.com/D16533
Summary: This label is too wide when a !!wild scrollbar appears!!
Test Plan: shrink height of tall thread list in Conpherence, see no wrapping.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16536
Summary:
Moves search and new room out of crumb bar and into the thread column. This opens up space to add "Edit Room" into the crumbs area as an action link. Also removed 'widget-edit' pathways and javascript.
Fixes T8972
Test Plan:
Search, New, Edit rooms. Click different rooms, see correct URL each time.
{F1813226}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T8972
Differential Revision: https://secure.phabricator.com/D16543
Summary:
Fixes T11627.
Beyond being complex, I have no real reason to believe these checks even work (and they don't test repositories, file storage, logfiles, etc).
Test Plan:
Faked the error:
{F1813433}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11627
Differential Revision: https://secure.phabricator.com/D16544
Summary:
Ref T11613. In D16503/T11598 I refined the setup flow to improve messaging for early-stage setup issues, but failed to fully untangle things.
We sometimes still try to access a cache which uses configuration before we build configuration, which causes an error.
Instead, store "are we in flight / has setup ever worked?" in a separate cache which doesn't use the cache namespace. This stops us from trying to read config before building config.
Test Plan:
Hit bad extension error with a fake extension, got a proper setup help page:
{F1812803}
Solved the error, reloaded, broke things again, got a "friendly" page:
{F1812805}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11613
Differential Revision: https://secure.phabricator.com/D16542
Summary: This makes all favicons a background circle w/color and white gear, to be less confusing to an actual gear icon.
Test Plan:
review many different versions in sandbox.
{F1811707,size=full}
Reviewers: epriestley, avivey
Reviewed By: avivey
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16539
Summary:
* All Applications are useing the description "Tags", Phriction actually uses "Projects"
* Changed "Projects" to "Tags" for phriction
Ref T11614
Test Plan:
* Edited a document, took a look at the description for that input line
* Added a project to a page and saved it
Reviewers: chad, #blessed_reviewers
Reviewed By: chad, #blessed_reviewers
Subscribers: avivey, chad, epriestley
Tags: #phriction
Maniphest Tasks: T11614
Differential Revision: https://secure.phabricator.com/D16537
Summary: Fixes T10155
Test Plan: View an empty repository in diffusion, check for the exception.
See T10155 for steps to reproduce
Reviewers: epriestley
Subscribers:
Summary: Swaps to new logo, new color for default favicon. Adds red, yellow, dark for other uses. perhaps.
Test Plan: reload, see new favicon
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16530
Summary: Cleans up a number of inconsistencies, makes Conpherence lighter, easier to read, make names larger, darker.
Test Plan: Review Conpherence chat in Main App, Durable Column, Mobile, Tablet
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16531
Summary: Just changes the default here. Main reasoning is if I'm searching for a room, show me all of them first. "My Rooms" is where I just came from.
Test Plan: Click Search in Conpherence, see All Rooms as default.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16527
Summary: Fixes T10781. Re-uses sidenav styles from global space, though a little hacky. Fix crumb border, fix nux experience. Fiddle spacing.
Test Plan:
Use Conpherence as new user, make a room, post some messages.
{F1805658}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10781
Differential Revision: https://secure.phabricator.com/D16528
Summary: Fixes a typo in the Almanac docs.
Test Plan: Didn't test this one.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16529
Summary: Fixes T10131. Adds new CSS to better present document pages for printing. Added a print link to Phriction.
Test Plan: Tested Phriction, Phame, and Legalpad.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10131
Differential Revision: https://secure.phabricator.com/D16524
