1
0
Fork 0
mirror of https://we.phorge.it/source/phorge.git synced 2024-12-23 05:50:55 +01:00
phorge-phorge/conf/default.conf.php
vrana 3387e26e7a Describe translation differences
Test Plan: Read.

Reviewers: epriestley

Reviewed By: epriestley

CC: aran, Korvin

Maniphest Tasks: T1139

Differential Revision: https://secure.phabricator.com/D2807
2012-06-20 11:34:43 -07:00

1129 lines
51 KiB
PHP

<?php
/*
* Copyright 2012 Facebook, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
return array(
// The root URI which Phabricator is installed on.
// Example: "http://phabricator.example.com/"
'phabricator.base-uri' => null,
// If you have multiple environments, provide the production environment URI
// here so that emails, etc., generated in development/sandbox environments
// contain the right links.
'phabricator.production-uri' => null,
// Setting this to 'true' will invoke a special setup mode which helps guide
// you through setting up Phabricator.
'phabricator.setup' => false,
// -- IMPORTANT! Security! -------------------------------------------------- //
// IMPORTANT: By default, Phabricator serves files from the same domain the
// application lives on. This is convenient but not secure: it creates a large
// class of vulnerabilities which can not be generally mitigated.
//
// To avoid this, you should configure a second domain in the same way you
// have the primary domain configured (e.g., point it at the same machine and
// set up the same vhost rules) and provide it here. For instance, if your
// primary install is on "http://www.phabricator-example.com/", you could
// configure "http://www.phabricator-files.com/" and specify the entire
// domain (with protocol) here. This will enforce that files are
// served only from the alternate domain. Ideally, you should use a
// completely separate domain name rather than just a different subdomain.
//
// It is STRONGLY RECOMMENDED that you configure this. Your install is NOT
// SECURE unless you do so.
'security.alternate-file-domain' => null,
// Default key for HMAC digests where the key is not important (i.e., the
// hash itself is secret). You can change this if you want (to any other
// string), but doing so will break existing sessions and CSRF tokens.
'security.hmac-key' => '[D\t~Y7eNmnQGJ;rnH6aF;m2!vJ8@v8C=Cs:aQS\.Qw',
// -- Customization --------------------------------------------------------- //
// If you want to use a custom logo (e.g., for your company or organization),
// copy 'webroot/rsrc/image/custom/example_template.png' to
// 'webroot/rsrc/image/custom/custom.png' and set this to the URI you want it
// to link to (like http://www.yourcompany.com/).
'phabricator.custom.logo' => null,
// -- Internationalization -------------------------------------------------- //
// This allows customizing texts used in Phabricator. The class must extend
// PhabricatorTranslation.
'translation.provider' => 'PhabricatorEnglishTranslation',
// -- Access Policies ------------------------------------------------------- //
// Phabricator allows you to set the visibility of objects (like repositories
// and source code) to "Public", which means anyone on the internet can see
// them, even without being logged in. This is great for open source, but
// some installs may never want to make anything public, so this policy is
// disabled by default. You can enable it here, which will let you set the
// policy for objects to "Public". With this option disabled, the most open
// policy is "All Users", which means users must be logged in to view things.
'policy.allow-public' => false,
// -- Logging --------------------------------------------------------------- //
// To enable the Phabricator access log, specify a path here. The Phabricator
// access log can provide more detailed information about Phabricator access
// than normal HTTP access logs (for instance, it can show logged-in users,
// controllers, and other application data). If not set, no log will be
// written.
//
// Make sure the PHP process can write to the log!
'log.access.path' => null,
// Format for the access log. If not set, the default format will be used:
//
// "[%D]\t%h\t%u\t%M\t%C\t%m\t%U\t%c\t%T"
//
// Available variables are:
//
// - %c The HTTP response code.
// - %C The controller which handled the request.
// - %D The request date.
// - %e Epoch timestamp.
// - %h The webserver's host name.
// - %p The PID of the server process.
// - %R The HTTP referrer.
// - %r The remote IP.
// - %T The request duration, in microseconds.
// - %U The request path.
// - %u The logged-in user, if one is logged in.
// - %M The HTTP method.
// - %m For conduit, the Conduit method which was invoked.
//
// If a variable isn't available (for example, %m appears in the file format
// but the request is not a Conduit request), it will be rendered as "-".
//
// Note that the default format is subject to change in the future, so if you
// rely on the log's format, specify it explicitly.
'log.access.format' => null,
// -- DarkConsole ----------------------------------------------------------- //
// DarkConsole is a administrative debugging/profiling tool built into
// Phabricator. You can leave it disabled unless you're developing against
// Phabricator.
// Determines whether or not DarkConsole is available. DarkConsole exposes
// some data like queries and stack traces, so you should be careful about
// turning it on in production (although users can not normally see it, even
// if the deployment configuration enables it).
'darkconsole.enabled' => false,
// Always enable DarkConsole, even for logged out users. This potentially
// exposes sensitive information to users, so make sure untrusted users can
// not access an install running in this mode. You should definitely leave
// this off in production. It is only really useful for using DarkConsole
// utilities to debug or profile logged-out pages. You must set
// 'darkconsole.enabled' to use this option.
'darkconsole.always-on' => false,
// Allows you to mask certain configuration values from appearing in the
// "Config" tab of DarkConsole.
'darkconsole.config-mask' => array(
'mysql.pass',
'amazon-ses.secret-key',
'recaptcha.private-key',
'phabricator.csrf-key',
'facebook.application-secret',
'github.application-secret',
'google.application-secret',
'phabricator.application-secret',
'disqus.application-secret',
'phabricator.mail-key',
'security.hmac-key',
),
// -- MySQL --------------------------------------------------------------- //
// Class providing database configuration. It must implement
// DatabaseConfigurationProvider.
'mysql.configuration-provider' => 'DefaultDatabaseConfigurationProvider',
// The username to use when connecting to MySQL.
'mysql.user' => 'root',
// The password to use when connecting to MySQL.
'mysql.pass' => '',
// The MySQL server to connect to. If you want to connect to a different
// port than the default (which is 3306), specify it in the hostname
// (e.g., db.example.com:1234).
'mysql.host' => 'localhost',
// The number of times to try reconnecting to the MySQL database
'mysql.connection-retries' => 3,
// Phabricator supports PHP extensions MySQL and MySQLi. It is possible to
// implement also other access mechanism (e.g. PDO_MySQL). The class must
// extend AphrontMySQLDatabaseConnectionBase.
'mysql.implementation' => 'AphrontMySQLDatabaseConnection',
// -- Notifications --------------------------------------------------------- //
'notification.enabled' => false,
// Client port for the realtime server to listen on, and for realtime clients
// to connect to. Use "localhost" if you are running the notification server
// on the same host as the web server.
'notification.client-uri' => 'http://localhost:22280/',
// URI and port for the notification root server.
'notification.server-uri' => 'http://localhost:22281/',
// The server must be started as root so it can bind to privileged ports, but
// if you specify a user here it will drop permissions after binding.
'notification.user' => null,
// Location where the server should log to.
'notification.log' => '/var/log/aphlict.log',
// PID file to use.
'notification.pidfile' => '/var/run/aphlict.pid',
// -- Email ----------------------------------------------------------------- //
// Some Phabricator tools send email notifications, e.g. when Differential
// revisions are updated or Maniphest tasks are changed. These options allow
// you to configure how email is delivered.
// You can test your mail setup by going to "MetaMTA" in the web interface,
// clicking "Send New Message", and then composing a message.
// Default address to send mail "From".
'metamta.default-address' => 'noreply@example.com',
// Domain used to generate Message-IDs.
'metamta.domain' => 'example.com',
// When a message is sent to multiple recipients (for example, several
// reviewers on a code review), Phabricator can either deliver one email to
// everyone (e.g., "To: alincoln, usgrant, htaft") or separate emails to each
// user (e.g., "To: alincoln", "To: usgrant", "To: htaft"). The major
// advantages and disadvantages of each approach are:
//
// - One mail to everyone:
// - Recipients can see To/Cc at a glance.
// - If you use mailing lists, you won't get duplicate mail if you're
// a normal recipient and also Cc'd on a mailing list.
// - Getting threading to work properly is harder, and probably requires
// making mail less useful by turning off options.
// - Sometimes people will "Reply All" and everyone will get two mails,
// one from the user and one from Phabricator turning their mail into
// a comment.
// - Not supported with a private reply-to address.
// - Mails are sent in the server default translation.
// - One mail to each user:
// - Recipients need to look in the mail body to see To/Cc.
// - If you use mailing lists, recipients may sometimes get duplicate
// mail.
// - Getting threading to work properly is easier, and threading settings
// can be customzied by each user.
// - "Reply All" no longer spams all other users.
// - Required if private reply-to addresses are configured.
// - Mails are sent in the language of user preference.
//
// In the code, splitting one outbound email into one-per-recipient is
// sometimes referred to as "multiplexing".
'metamta.one-mail-per-recipient' => true,
// When a user takes an action which generates an email notification (like
// commenting on a Differential revision), Phabricator can either send that
// mail "From" the user's email address (like "alincoln@logcabin.com") or
// "From" the 'metamta.default-address' address. The user experience is
// generally better if Phabricator uses the user's real address as the "From"
// since the messages are easier to organize when they appear in mail clients,
// but this will only work if the server is authorized to send email on behalf
// of the "From" domain. Practically, this means:
// - If you are doing an install for Example Corp and all the users will
// have corporate @corp.example.com addresses and any hosts Phabricator
// is running on are authorized to send email from corp.example.com,
// you can enable this to make the user experience a little better.
// - If you are doing an install for an open source project and your
// users will be registering via Facebook and using personal email
// addresses, you MUST NOT enable this or virtually all of your outgoing
// email will vanish into SFP blackholes.
// - If your install is anything else, you're much safer leaving this
// off since the risk in turning it on is that your outgoing mail will
// mostly never arrive.
'metamta.can-send-as-user' => false,
// Adapter class to use to transmit mail to the MTA. The default uses
// PHPMailerLite, which will invoke "sendmail". This is appropriate
// if sendmail actually works on your host, but if you haven't configured mail
// it may not be so great. You can also use Amazon SES, by changing this to
// 'PhabricatorMailImplementationAmazonSESAdapter', signing up for SES, and
// filling in your 'amazon-ses.access-key' and 'amazon-ses.secret-key' below.
'metamta.mail-adapter' =>
'PhabricatorMailImplementationPHPMailerLiteAdapter',
// When email is sent, try to hand it off to the MTA immediately. This may
// be worth disabling if your MTA infrastructure is slow or unreliable. If you
// disable this option, you must run the 'metamta_mta.php' daemon or mail
// won't be handed off to the MTA. If you're using Amazon SES it can be a
// little slugish sometimes so it may be worth disabling this and moving to
// the daemon after you've got your install up and running. If you have a
// properly configured local MTA it should not be necessary to disable this.
'metamta.send-immediately' => true,
// If you're using Amazon SES to send email, provide your AWS access key
// and AWS secret key here. To set up Amazon SES with Phabricator, you need
// to:
// - Make sure 'metamta.mail-adapter' is set to:
// "PhabricatorMailImplementationAmazonSESAdapter"
// - Make sure 'metamta.can-send-as-user' is false.
// - Make sure 'metamta.default-address' is configured to something sensible.
// - Make sure 'metamta.default-address' is a validated SES "From" address.
'amazon-ses.access-key' => null,
'amazon-ses.secret-key' => null,
// If you're using Sendgrid to send email, provide your access credentials
// here. This will use the REST API. You can also use Sendgrid as a normal
// SMTP service.
'sendgrid.api-user' => null,
'sendgrid.api-key' => null,
// You can configure a reply handler domain so that email sent from Maniphest
// will have a special "Reply To" address like "T123+82+af19f@example.com"
// that allows recipients to reply by email and interact with tasks. For
// instructions on configurating reply handlers, see the article
// "Configuring Inbound Email" in the Phabricator documentation. By default,
// this is set to 'null' and Phabricator will use a generic 'noreply@' address
// or the address of the acting user instead of a special reply handler
// address (see 'metamta.default-address'). If you set a domain here,
// Phabricator will begin generating private reply handler addresses. See
// also 'metamta.maniphest.reply-handler' to further configure behavior.
// This key should be set to the domain part after the @, like "example.com".
'metamta.maniphest.reply-handler-domain' => null,
// You can follow the instructions in "Configuring Inbound Email" in the
// Phabricator documentation and set 'metamta.maniphest.reply-handler-domain'
// to support updating Maniphest tasks by email. If you want more advanced
// customization than this provides, you can override the reply handler
// class with an implementation of your own. This will allow you to do things
// like have a single public reply handler or change how private reply
// handlers are generated and validated.
// This key should be set to a loadable subclass of
// PhabricatorMailReplyHandler (and possibly of ManiphestReplyHandler).
'metamta.maniphest.reply-handler' => 'ManiphestReplyHandler',
// If you don't want phabricator to take up an entire domain
// (or subdomain for that matter), you can use this and set a common
// prefix for mail sent by phabricator. It will make use of the fact that
// a mail-address such as phabricator+D123+1hjk213h@example.com will be
// delivered to the phabricator users mailbox.
// Set this to the left part of the email address and it well get
// prepended to all outgoing mail. If you want to use e.g.
// 'phabricator@example.com' this should be set to 'phabricator'.
'metamta.single-reply-handler-prefix' => null,
// Prefix prepended to mail sent by Maniphest. You can change this to
// distinguish between testing and development installs, for example.
'metamta.maniphest.subject-prefix' => '[Maniphest]',
// See 'metamta.maniphest.reply-handler-domain'. This does the same thing,
// but allows email replies via Differential.
'metamta.differential.reply-handler-domain' => null,
// See 'metamta.maniphest.reply-handler'. This does the same thing, but
// affects Differential.
'metamta.differential.reply-handler' => 'DifferentialReplyHandler',
// Prefix prepended to mail sent by Differential.
'metamta.differential.subject-prefix' => '[Differential]',
// Set this to true if you want patches to be attached to mail from
// Differential. This won't work if you are using SendGrid as your mail
// adapter.
'metamta.differential.attach-patches' => false,
// To include patches in email bodies, set this to a positive integer. Patches
// will be inlined if they are at most that many lines. For instance, a value
// of 100 means "inline patches if they are no longer than 100 lines". By
// default, patches are not inlined.
'metamta.differential.inline-patches' => 0,
// If you enable either of the options above, you can choose what format
// patches are sent in. Valid options are 'unified' (like diff -u) or 'git'.
'metamta.differential.patch-format' => 'unified',
// Prefix prepended to mail sent by Diffusion.
'metamta.diffusion.subject-prefix' => '[Diffusion]',
// See 'metamta.maniphest.reply-handler-domain'. This does the same thing,
// but allows email replies via Diffusion.
'metamta.diffusion.reply-handler-domain' => null,
// See 'metamta.maniphest.reply-handler'. This does the same thing, but
// affects Diffusion.
'metamta.diffusion.reply-handler' => 'PhabricatorAuditReplyHandler',
// Prefix prepended to mail sent by Package.
'metamta.package.subject-prefix' => '[Package]',
// See 'metamta.maniphest.reply-handler'. This does similar thing for package
// except that it only supports sending out mail and doesn't handle incoming
// email.
'metamta.package.reply-handler' => 'OwnersPackageReplyHandler',
// By default, Phabricator generates unique reply-to addresses and sends a
// separate email to each recipient when you enable reply handling. This is
// more secure than using "From" to establish user identity, but can mean
// users may receive multiple emails when they are on mailing lists. Instead,
// you can use a single, non-unique reply to address and authenticate users
// based on the "From" address by setting this to 'true'. This trades away
// a little bit of security for convenience, but it's reasonable in many
// installs. Object interactions are still protected using hashes in the
// single public email address, so objects can not be replied to blindly.
'metamta.public-replies' => false,
// You can configure an email address like "bugs@phabricator.example.com"
// which will automatically create Maniphest tasks when users send email
// to it. This relies on the "From" address to authenticate users, so it is
// is not completely secure. To set this up, enter a complete email
// address like "bugs@phabricator.example.com" and then configure mail to
// that address so it routed to Phabricator (if you've already configured
// reply handlers, you're probably already done). See "Configuring Inbound
// Email" in the documentation for more information.
'metamta.maniphest.public-create-email' => null,
// If you enable 'metamta.public-replies', Phabricator uses "From" to
// authenticate users. You can additionally enable this setting to try to
// authenticate with 'Reply-To'. Note that this is completely spoofable and
// insecure (any user can set any 'Reply-To' address) but depending on the
// nature of your install or other deliverability conditions this might be
// okay. Generally, you can't do much more by spoofing Reply-To than be
// annoying (you can write but not read content). But, you know, this is
// still **COMPLETELY INSECURE**.
'metamta.insecure-auth-with-reply-to' => false,
// If you enable 'metamta.maniphest.public-create-email' and create an
// email address like "bugs@phabricator.example.com", it will default to
// rejecting mail which doesn't come from a known user. However, you might
// want to let anyone send email to this address; to do so, set a default
// author here (a Phabricator username). A typical use of this might be to
// create a "System Agent" user called "bugs" and use that name here. If you
// specify a valid username, mail will always be accepted and used to create
// a task, even if the sender is not a system user. The original email
// address will be stored in an 'From Email' field on the task.
'metamta.maniphest.default-public-author' => null,
// If this option is enabled, Phabricator will add a "Precedence: bulk"
// header to transactional mail (e.g., Differential, Maniphest and Herald
// notifications). This may improve the behavior of some auto-responder
// software and prevent it from replying. However, it may also cause
// deliverability issues -- notably, you currently can not send this header
// via Amazon SES, and enabling this option with SES will prevent delivery
// of any affected mail.
'metamta.precedence-bulk' => false,
// Mail.app on OS X Lion won't respect threading headers unless the subject
// is prefixed with "Re:". If you enable this option, Phabricator will add
// "Re:" to the subject line of all mail which is expected to thread. If
// you've set 'metamta.one-mail-per-recipient', users can override this
// setting in their preferences.
'metamta.re-prefix' => false,
// If true, allow MetaMTA to change mail subjects to put text like
// '[Accepted]' and '[Commented]' in them. This makes subjects more useful,
// but might break threading on some clients. If you've set
// 'metamta.one-mail-per-recipient', users can override this setting in their
// preferences.
'metamta.vary-subjects' => true,
// -- Auth ------------------------------------------------------------------ //
// Can users login with a username/password, or by following the link from
// a password reset email? You can disable this and configure one or more
// OAuth providers instead.
'auth.password-auth-enabled' => true,
// Maximum number of simultaneous web sessions each user is permitted to have.
// Setting this to "1" will prevent a user from logging in on more than one
// browser at the same time.
'auth.sessions.web' => 5,
// Maximum number of simultaneous Conduit sessions each user is permitted
// to have.
'auth.sessions.conduit' => 5,
// Set this true to enable the Settings -> SSH Public Keys panel, which will
// allow users to associated SSH public keys with their accounts. This is only
// really useful if you're setting up services over SSH and want to use
// Phabricator for authentication; in most situations you can leave this
// disabled.
'auth.sshkeys.enabled' => false,
// If true, email addresses must be verified (by clicking a link in an
// email) before a user can login. By default, verification is optional
// unless 'auth.email-domains' is nonempty (see below).
'auth.require-email-verification' => false,
// You can restrict allowed email addresses to certain domains (like
// "yourcompany.com") by setting a list of allowed domains here. Users will
// only be allowed to register using email addresses at one of the domains,
// and will only be able to add new email addresses for these domains. If
// you configure this, it implies 'auth.require-email-verification'.
//
// To configure email domains, set a list of domains like this:
//
// array(
// 'yourcompany.com',
// 'yourcompany.co.uk',
// )
//
// You should omit the "@" from domains. Note that the domain must match
// exactly. If you allow "yourcompany.com", that permits "joe@yourcompany.com"
// but rejects "joe@mail.yourcompany.com".
'auth.email-domains' => array(),
// -- Accounts -------------------------------------------------------------- //
// Is basic account information (email, real name, profile picture) editable?
// If you set up Phabricator to automatically synchronize account information
// from some other authoritative system, you can disable this to ensure
// information remains consistent across both systems.
'account.editable' => true,
// When users set or reset a password, it must have at least this many
// characters.
'account.minimum-password-length' => 8,
// -- Facebook OAuth -------------------------------------------------------- //
// Can users use Facebook credentials to login to Phabricator?
'facebook.auth-enabled' => false,
// Can users use Facebook credentials to create new Phabricator accounts?
'facebook.registration-enabled' => true,
// Are Facebook accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'facebook.auth-permanent' => false,
// The Facebook "Application ID" to use for Facebook API access.
'facebook.application-id' => null,
// The Facebook "Application Secret" to use for Facebook API access.
'facebook.application-secret' => null,
// -- GitHub OAuth ---------------------------------------------------------- //
// Can users use GitHub credentials to login to Phabricator?
'github.auth-enabled' => false,
// Can users use GitHub credentials to create new Phabricator accounts?
'github.registration-enabled' => true,
// Are GitHub accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'github.auth-permanent' => false,
// The GitHub "Client ID" to use for GitHub API access.
'github.application-id' => null,
// The GitHub "Secret" to use for GitHub API access.
'github.application-secret' => null,
// -- Google OAuth ---------------------------------------------------------- //
// Can users use Google credentials to login to Phabricator?
'google.auth-enabled' => false,
// Can users use Google credentials to create new Phabricator accounts?
'google.registration-enabled' => true,
// Are Google accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'google.auth-permanent' => false,
// The Google "Client ID" to use for Google API access.
'google.application-id' => null,
// The Google "Client Secret" to use for Google API access.
'google.application-secret' => null,
// -- LDAP Auth ----------------------------------------------------- //
// Enable ldap auth
'ldap.auth-enabled' => false,
// The LDAP server hostname
'ldap.hostname' => '',
// The LDAP base domain name
'ldap.base_dn' => '',
// The attribute to be regarded as 'username'. Has to be unique
'ldap.search_attribute' => '',
// The attribute(s) to be regarded as 'real name'.
// If more then one attribute is supplied the values of the attributes in
// the array will be joined
'ldap.real_name_attributes' => array(),
// The LDAP version
'ldap.version' => 3,
// -- Disqus OAuth ---------------------------------------------------------- //
// Can users use Disqus credentials to login to Phabricator?
'disqus.auth-enabled' => false,
// Can users use Disqus credentials to create new Phabricator accounts?
'disqus.registration-enabled' => true,
// Are Disqus accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'disqus.auth-permanent' => false,
// The Disqus "Client ID" to use for Disqus API access.
'disqus.application-id' => null,
// The Disqus "Client Secret" to use for Disqus API access.
'disqus.application-secret' => null,
// -- Phabricator OAuth ----------------------------------------------------- //
// Meta-town -- Phabricator is itself an OAuth Provider
// TODO -- T887 -- make this support multiple Phabricator instances!
// The URI of the Phabricator instance to use as an OAuth server.
'phabricator.oauth-uri' => null,
// Can users use Phabricator credentials to login to Phabricator?
'phabricator.auth-enabled' => false,
// Can users use Phabricator credentials to create new Phabricator accounts?
'phabricator.registration-enabled' => true,
// Are Phabricator accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'phabricator.auth-permanent' => false,
// The Phabricator "Client ID" to use for Phabricator API access.
'phabricator.application-id' => null,
// The Phabricator "Client Secret" to use for Phabricator API access.
'phabricator.application-secret' => null,
// -- Disqus Comments ------------------------------------------------------- //
// Should Phame users have Disqus comment widget, and if so what's the
// website shortname to use? For example, secure.phabricator.org uses
// "phabricator", which we registered with Disqus. If you aren't familiar
// with Disqus, see:
// Disqus quick start guide - http://docs.disqus.com/help/4/
// Information on shortnames - http://docs.disqus.com/help/68/
'disqus.shortname' => null,
// -- Recaptcha ------------------------------------------------------------- //
// Is Recaptcha enabled? If disabled, captchas will not appear. You should
// enable Recaptcha if your install is public-facing, as it hinders
// brute-force attacks.
'recaptcha.enabled' => false,
// Your Recaptcha public key, obtained from Recaptcha.
'recaptcha.public-key' => null,
// Your Recaptcha private key, obtained from Recaptcha.
'recaptcha.private-key' => null,
// -- Misc ------------------------------------------------------------------ //
// This is hashed with other inputs to generate CSRF tokens. If you want, you
// can change it to some other string which is unique to your install. This
// will make your install more secure in a vague, mostly theoretical way. But
// it will take you like 3 seconds of mashing on your keyboard to set it up so
// you might as well.
'phabricator.csrf-key' => '0b7ec0592e0a2829d8b71df2fa269b2c6172eca3',
// This is hashed with other inputs to generate mail tokens. If you want, you
// can change it to some other string which is unique to your install. In
// particular, you will want to do this if you accidentally send a bunch of
// mail somewhere you shouldn't have, to invalidate all old reply-to
// addresses.
'phabricator.mail-key' => '5ce3e7e8787f6e40dfae861da315a5cdf1018f12',
// Version string displayed in the footer. You probably should leave this
// alone.
'phabricator.version' => 'UNSTABLE',
// PHP requires that you set a timezone in your php.ini before using date
// functions, or it will emit a warning. If this isn't possible (for instance,
// because you are using HPHP) you can set some valid constant for
// date_default_timezone_set() here and Phabricator will set it on your
// behalf, silencing the warning.
'phabricator.timezone' => null,
// When unhandled exceptions occur, stack traces are hidden by default.
// You can enable traces for development to make it easier to debug problems.
'phabricator.show-stack-traces' => false,
// Shows an error callout if a page generated PHP errors, warnings or notices.
// This makes it harder to miss problems while developing Phabricator.
'phabricator.show-error-callout' => false,
// When users write comments which have URIs, they'll be automatically linked
// if the protocol appears in this set. This whitelist is primarily to prevent
// security issues like javascript:// URIs.
'uri.allowed-protocols' => array(
'http' => true,
'https' => true,
),
// Tokenizers are UI controls which let the user select other users, email
// addresses, project names, etc., by typing the first few letters and having
// the control autocomplete from a list. They can load their data in two ways:
// either in a big chunk up front, or as the user types. By default, the data
// is loaded in a big chunk. This is simpler and performs better for small
// datasets. However, if you have a very large number of users or projects,
// (in the ballpark of more than a thousand), loading all that data may become
// slow enough that it's worthwhile to query on demand instead. This makes
// the typeahead slightly less responsive but overall performance will be much
// better if you have a ton of stuff. You can figure out which setting is
// best for your install by changing this setting and then playing with a
// user tokenizer (like the user selectors in Maniphest or Differential) and
// seeing which setting loads faster and feels better.
'tokenizer.ondemand' => false,
// By default, Phabricator includes some silly nonsense in the UI, such as
// a submit button called "Clowncopterize" in Differential and a call to
// "Leap Into Action". If you'd prefer more traditional UI strings like
// "Submit", you can set this flag to disable most of the jokes and easter
// eggs.
'phabricator.serious-business' => false,
// -- Files ----------------------------------------------------------------- //
// Lists which uploaded file types may be viewed in the browser. If a file
// has a mime type which does not appear in this list, it will always be
// downloaded instead of displayed. This is mainly a usability
// consideration, since browsers tend to freak out when viewing enormous
// binary files.
//
// The keys in this array are viewable mime types; the values are the mime
// types they will be delivered as when they are viewed in the browser.
//
// IMPORTANT: Configure 'security.alternate-file-domain' above! Your install
// is NOT safe if it is left unconfigured.
'files.viewable-mime-types' => array(
'image/jpeg' => 'image/jpeg',
'image/jpg' => 'image/jpg',
'image/png' => 'image/png',
'image/gif' => 'image/gif',
'text/plain' => 'text/plain; charset=utf-8',
'text/x-diff' => 'text/plain; charset=utf-8',
// ".ico" favicon files, which have mime type diversity. See:
// http://en.wikipedia.org/wiki/ICO_(file_format)#MIME_type
'image/x-ico' => 'image/x-icon',
'image/x-icon' => 'image/x-icon',
'image/vnd.microsoft.icon' => 'image/x-icon',
),
// List of mime types which can be used as the source for an <img /> tag.
// This should be a subset of 'files.viewable-mime-types' and exclude files
// like text.
'files.image-mime-types' => array(
'image/jpeg' => true,
'image/jpg' => true,
'image/png' => true,
'image/gif' => true,
'image/x-ico' => true,
'image/x-icon' => true,
'image/vnd.microsoft.icon' => true,
),
// Phabricator can proxy images from other servers so you can paste the URI
// to a funny picture of a cat into the comment box and have it show up as an
// image. However, this means the webserver Phabricator is running on will
// make HTTP requests to arbitrary URIs. If the server has access to internal
// resources, this could be a security risk. You should only enable it if you
// are installed entirely a VPN and VPN access is required to access
// Phabricator, or if the webserver has no special access to anything. If
// unsure, it is safer to leave this disabled.
'files.enable-proxy' => false,
// -- Storage --------------------------------------------------------------- //
// Phabricator allows users to upload files, and can keep them in various
// storage engines. This section allows you to configure which engines
// Phabricator will use, and how it will use them.
// The largest filesize Phabricator will store in the MySQL BLOB storage
// engine, which just uses a database table to store files. While this isn't a
// best practice, it's really easy to set up. This is hard-limited by the
// value of 'max_allowed_packet' in MySQL (since this often defaults to 1MB,
// the default here is slightly smaller than 1MB). Set this to 0 to disable
// use of the MySQL blob engine.
'storage.mysql-engine.max-size' => 1000000,
// Phabricator provides a local disk storage engine, which just writes files
// to some directory on local disk. The webserver must have read/write
// permissions on this directory. This is straightforward and suitable for
// most installs, but will not scale past one web frontend unless the path
// is actually an NFS mount, since you'll end up with some of the files
// written to each web frontend and no way for them to share. To use the
// local disk storage engine, specify the path to a directory here. To
// disable it, specify null.
'storage.local-disk.path' => null,
// If you want to store files in Amazon S3, specify an AWS access and secret
// key here and a bucket name below.
'amazon-s3.access-key' => null,
'amazon-s3.secret-key' => null,
// Set this to a valid Amazon S3 bucket to store files there. You must also
// configure S3 access keys above.
'storage.s3.bucket' => null,
// Phabricator uses a storage engine selector to choose which storage engine
// to use when writing file data. If you add new storage engines or want to
// provide very custom rules (e.g., write images to one storage engine and
// other files to a different one), you can provide an alternate
// implementation here. The default engine will use choose MySQL, Local Disk,
// and S3, in that order, if they have valid configurations above and a file
// fits within configured limits.
'storage.engine-selector' => 'PhabricatorDefaultFileStorageEngineSelector',
// Set the size of the largest file a user may upload. This is used to render
// text like "Maximum file size: 10MB" on interfaces where users can upload
// files, and files larger than this size will be rejected.
//
// Specify this limit in bytes, or using a "K", "M", or "G" suffix.
//
// NOTE: Setting this to a large size is NOT sufficient to allow users to
// upload large files. You must also configure a number of other settings. To
// configure file upload limits, consult the article "Configuring File Upload
// Limits" in the documentation. Once you've configured some limit across all
// levels of the server, you can set this limit to an appropriate value and
// the UI will then reflect the actual configured limit.
'storage.upload-size-limit' => null,
// Phabricator puts databases in a namespace, which defualts to "phabricator"
// -- for instance, the Differential database is named
// "phabricator_differential" by default. You can change this namespace if you
// want. Normally, you should not do this unless you are developing
// Phabricator and using namespaces to separate multiple sandbox datasets.
'storage.default-namespace' => 'phabricator',
// -- Search ---------------------------------------------------------------- //
// Phabricator supports Elastic Search; to use it, specify a host like
// 'http://elastic.example.com:9200/' here.
'search.elastic.host' => null,
// Phabricator uses a search engine selector to choose which search engine
// to use when indexing and reconstructing documents, and when executing
// queries. You can override the engine selector to provide a new selector
// class which can select some custom engine you implement, if you want to
// store your documents in some search engine which does not have default
// support.
'search.engine-selector' => 'PhabricatorDefaultSearchEngineSelector',
// -- Differential ---------------------------------------------------------- //
'differential.revision-custom-detail-renderer' => null,
// Array for custom remarkup rules. The array should have a list of
// class names of classes that extend PhutilRemarkupRule
'differential.custom-remarkup-rules' => null,
// Array for custom remarkup block rules. The array should have a list of
// class names of classes that extend PhutilRemarkupEngineBlockRule
'differential.custom-remarkup-block-rules' => null,
// Set display word-wrap widths for Differential. Specify a dictionary of
// regular expressions mapping to column widths. The filename will be matched
// against each regexp in order until one matches. The default configuration
// uses a width of 100 for Java and 80 for other languages. Note that 80 is
// the greatest column width of all time. Changes here will not be immediately
// reflected in old revisions unless you purge the changeset render cache
// (with `./scripts/util/purge_cache.php --changesets`).
'differential.wordwrap' => array(
'/\.java$/' => 100,
'/.*/' => 80,
),
// List of file regexps where whitespace is meaningful and should not
// use 'ignore-all' by default
'differential.whitespace-matters' => array(
'/\.py$/',
'/\.l?hs$/',
),
'differential.field-selector' => 'DifferentialDefaultFieldSelector',
// Differential can show "Host" and "Path" fields on revisions, with
// information about the machine and working directory where the
// change came from. These fields are disabled by default because they may
// occasionally have sensitive information; you can set this to true to
// enable them.
'differential.show-host-field' => false,
// Differential has a required "Test Plan" field by default, which requires
// authors to fill out information about how they verified the correctness of
// their changes when sending code for review. If you'd prefer not to use
// this field, you can disable it here. You can also make it optional
// (instead of required) below.
'differential.show-test-plan-field' => true,
// Differential has a required "Test Plan" field by default. You can make it
// optional by setting this to false. You can also completely remove it above,
// if you prefer.
'differential.require-test-plan-field' => true,
// If you set this to true, users can "!accept" revisions via email (normally,
// they can take other actions but can not "!accept"). This action is disabled
// by default because email authentication can be configured to be very weak,
// and, socially, email "!accept" is kind of sketchy and implies revisions may
// not actually be receiving thorough review.
'differential.enable-email-accept' => false,
// If you set this to true, users won't need to login to view differential
// revisions. Anonymous users will have read-only access and won't be able to
// interact with the revisions.
'differential.anonymous-access' => false,
// List of file regexps that should be treated as if they are generated by
// an automatic process, and thus get hidden by default in differential
'differential.generated-paths' => array(
// '/config\.h$/',
// '#/autobuilt/#',
),
// -- Maniphest ------------------------------------------------------------- //
'maniphest.enabled' => true,
// Array of custom fields for Maniphest tasks. For details on adding custom
// fields to Maniphest, see "Maniphest User Guide: Adding Custom Fields".
'maniphest.custom-fields' => array(),
// Class which drives custom field construction. See "Maniphest User Guide:
// Adding Custom Fields" in the documentation for more information.
'maniphest.custom-task-extensions-class' => 'ManiphestDefaultTaskExtensions',
// -- Phriction ------------------------------------------------------------- //
'phriction.enabled' => true,
// -- Remarkup -------------------------------------------------------------- //
// If you enable this, linked YouTube videos will be embeded inline. This has
// mild security implications (you'll leak referrers to YouTube) and is pretty
// silly (but sort of awesome).
'remarkup.enable-embedded-youtube' => false,
// -- Garbage Collection ---------------------------------------------------- //
// Phabricator generates various logs and caches in the database which can
// be garbage collected after a while to make the total data size more
// manageable. To run garbage collection, launch a
// PhabricatorGarbageCollector daemon.
// Since the GC daemon can issue large writes and table scans, you may want to
// run it only during off hours or make sure it is scheduled so it doesn't
// overlap with backups. This determines when the daemon can start running
// each day.
'gcdaemon.run-at' => '12 AM',
// How many seconds after 'gcdaemon.run-at' the daemon may collect garbage
// for. By default it runs continuously, but you can set it to run for a
// limited period of time. For instance, if you do backups at 3 AM, you might
// run garbage collection for an hour beforehand. This is not a high-precision
// limit so you may want to leave some room for the GC to actually stop, and
// if you set it to something like 3 seconds you're on your own.
'gcdaemon.run-for' => 24 * 60 * 60,
// These 'ttl' keys configure how much old data the GC daemon keeps around.
// Objects older than the ttl will be collected. Set any value to 0 to store
// data indefinitely.
'gcdaemon.ttl.herald-transcripts' => 30 * (24 * 60 * 60),
'gcdaemon.ttl.daemon-logs' => 7 * (24 * 60 * 60),
'gcdaemon.ttl.differential-parse-cache' => 14 * (24 * 60 * 60),
// -- Feed ------------------------------------------------------------------ //
// If you set this to true, you can embed Phabricator activity feeds in other
// pages using iframes. These feeds are completely public, and a login is not
// required to view them! This is intended for things like open source
// projects that want to expose an activity feed on the project homepage.
'feed.public' => false,
// -- Drydock --------------------------------------------------------------- //
// If you want to use Drydock's builtin EC2 Blueprints, configure your AWS
// EC2 credentials here.
'amazon-ec2.access-key' => null,
'amazon-ec2.secret-key' => null,
// -- Customization --------------------------------------------------------- //
// Paths to additional phutil libraries to load.
'load-libraries' => array(),
'aphront.default-application-configuration-class' =>
'AphrontDefaultApplicationConfiguration',
'controller.oauth-registration' =>
'PhabricatorOAuthDefaultRegistrationController',
// Directory that phd (the Phabricator daemon control script) should use to
// track running daemons.
'phd.pid-directory' => '/var/tmp/phd',
// Number of "TaskMaster" daemons that "phd start" should start. You can
// raise this if you have a task backlog, or explicitly launch more with
// "phd launch <N> taskmaster".
'phd.start-taskmasters' => 4,
// Launch daemons in "verbose" mode by default. This creates a lot of output,
// but can help debug issues. Daemons launched in debug mode with "phd debug"
// are always launched in verbose mode. See also 'phd.trace'.
'phd.verbose' => false,
// Launch daemons in "trace" mode by default. This creates an ENORMOUS amount
// of output, but can help debug issues. Daemons launched in debug mode with
// "phd debug" are always launched in trace mdoe. See also 'phd.verbose'.
'phd.trace' => false,
// Path to custom celerity resource map relative to 'phabricator/src'.
// See also `scripts/celerity_mapper.php`.
'celerity.resource-path' => '__celerity_resource_map__.php',
// This value is an input to the hash function when building resource hashes.
// It has no security value, but if you accidentally poison user caches (by
// pushing a bad patch or having something go wrong with a CDN, e.g.) you can
// change this to something else and rebuild the Celerity map to break user
// caches. Unless you are doing Celerity development, it is exceptionally
// unlikely that you need to modify this.
'celerity.resource-hash' => 'd9455ea150622ee044f7931dabfa52aa',
// In a development environment, it is desirable to force static resources
// (CSS and JS) to be read from disk on every request, so that edits to them
// appear when you reload the page even if you haven't updated the resource
// maps. This setting ensures requests will be verified against the state on
// disk. Generally, you should leave this off in production (caching behavior
// and performance improve with it off) but turn it on in development. (These
// settings are the defaults.)
'celerity.force-disk-reads' => false,
// Minify static resources by removing whitespace and comments. You should
// enable this in production, but disable it in development.
'celerity.minify' => false,
// You can respond to various application events by installing listeners,
// which will receive callbacks when interesting things occur. Specify a list
// of classes which extend PhabricatorEventListener here.
'events.listeners' => array(),
// -- Pygments -------------------------------------------------------------- //
// Phabricator can highlight PHP by default, but if you want syntax
// highlighting for other languages you should install the python package
// 'Pygments', make sure the 'pygmentize' script is available in the
// $PATH of the webserver, and then enable this.
'pygments.enabled' => false,
// In places that we display a dropdown to syntax-highlight code,
// this is where that list is defined.
// Syntax is 'lexer-name' => 'Display Name',
'pygments.dropdown-choices' => array(
'apacheconf' => 'Apache Configuration',
'bash' => 'Bash Scripting',
'brainfuck' => 'Brainf*ck',
'c' => 'C',
'cpp' => 'C++',
'css' => 'CSS',
'diff' => 'Diff',
'django' => 'Django Templating',
'erb' => 'Embedded Ruby/ERB',
'erlang' => 'Erlang',
'html' => 'HTML',
'infer' => 'Infer from title (extension)',
'java' => 'Java',
'js' => 'Javascript',
'mysql' => 'MySQL',
'perl' => 'Perl',
'php' => 'PHP',
'text' => 'Plain Text',
'python' => 'Python',
'rainbow' => 'Rainbow',
'remarkup' => 'Remarkup',
'ruby' => 'Ruby',
'xml' => 'XML',
),
'pygments.dropdown-default' => 'infer',
// This is an override list of regular expressions which allows you to choose
// what language files are highlighted as. If your projects have certain rules
// about filenames or use unusual or ambiguous language extensions, you can
// create a mapping here. This is an ordered dictionary of regular expressions
// which will be tested against the filename. They should map to either an
// explicit language as a string value, or a numeric index into the captured
// groups as an integer.
'syntax.filemap' => array(
// Example: Treat all '*.xyz' files as PHP.
// '@\\.xyz$@' => 'php',
// Example: Treat 'httpd.conf' as 'apacheconf'.
// '@/httpd\\.conf$@' => 'apacheconf',
// Example: Treat all '*.x.bak' file as '.x'. NOTE: we map to capturing
// group 1 by specifying the mapping as "1".
// '@\\.([^.]+)\\.bak$@' => 1,
'@\.arcconfig$@' => 'js',
),
);