revi-archive/xz-archive
1
0
Fork 0
mirror of https://git.tukaani.org/xz.git synced 2024-04-04 12:36:23 +02:00
Code Activity
xz-archive/CMakeLists.txt

1660 lines
59 KiB
Text
Raw Normal View History

Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
#############################################################################
#
# Very limited CMake support for building some parts of XZ Utils
#
CMake: Fix typo in a comment.
2023-03-17 17:40:28 +01:00
# For now, this is intended to be useful to build static or shared liblzma
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# on Windows with MSVC (to avoid the need to maintain Visual Studio project
# files). Building liblzma on a few other platforms should work too but it
# is somewhat experimental and not as portable as using ./configure.
#
# On some platforms this builds also xz and xzdec, but these are
# highly experimental and meant for testing only:
# - No translations
#
# Other missing things:
# - No xzgrep or other scripts or their symlinks
CMake: Add liblzma tests. Thanks to Jia Tan for the patch.
2022-08-22 15:46:18 +02:00
# - No xz tests (liblzma tests only)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
#
# NOTE: Even if the code compiles without warnings, the end result may be
# different than via ./configure. Specifically, the list of #defines
# may be different (if so, probably this CMakeLists.txt got them wrong).
#
# This file provides the following installation components (if you only
# need liblzma, install only its components!):
# - liblzma_Runtime
# - liblzma_Development
# - xz (on some platforms only)
# - xzdec (on some platforms only)
#
# To find the target liblzma::liblzma from other packages, use the CONFIG
# option with find_package() to avoid a conflict with the FindLibLZMA module
# with case-insensitive file systems. For example, to require liblzma 5.2.5
# or a newer compatible version:
#
# find_package(liblzma 5.2.5 REQUIRED CONFIG)
# target_link_libraries(my_application liblzma::liblzma)
#
#############################################################################
#
# Author: Lasse Collin
#
# This file has been put into the public domain.
# You can do whatever you want with this file.
#
#############################################################################
CMake: Bump maximum policy version to 3.27. There are several new policies. CMP0149 may affect the Windows SDK version that CMake will choose by default. The new behavior is more predictable, always choosing the latest SDK version by default. The other new policies shouldn't affect this package.
2023-09-12 20:12:34 +02:00
cmake_minimum_required(VERSION 3.13...3.27 FATAL_ERROR)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
liblzma: Use __attribute__((__constructor__)) if available. This uses it for CRC table initializations when using --disable-small. It avoids mythread_once() overhead. It also means that then --disable-small --disable-threads is thread-safe if this attribute is supported.
2022-11-14 15:00:52 +01:00
include(CMakePushCheckState)
liblzma: Add fast CRC64 for 32/64-bit x86 using SSSE3 + SSE4.1 + CLMUL. It also works on E2K as it supports these intrinsics. On x86-64 runtime detection is used so the code keeps working on older processors too. A CLMUL-only build can be done by using -msse4.1 -mpclmul in CFLAGS and this will reduce the library size since the generic implementation and its 8 KiB lookup table will be omitted. On 32-bit x86 this isn't used by default for now because by default on 32-bit x86 the separate assembly file crc64_x86.S is used. If --disable-assembler is used then this new CLMUL code is used the same way as on 64-bit x86. However, a CLMUL-only build (-msse4.1 -mpclmul) won't omit the 8 KiB lookup table on 32-bit x86 due to a currently-missing check for disabled assembler usage. The configure.ac check should be such that the code won't be built if something in the toolchain doesn't support it but --disable-clmul-crc option can be used to unconditionally disable this feature. CLMUL speeds up decompression of files that have compressed very well (assuming CRC64 is used as a check type). It is know that the CLMUL code is significantly slower than the generic code for tiny inputs (especially 1-8 bytes but up to 16 bytes). If that is a real-world problem then there is already a commented-out variant that uses the generic version for small inputs. Thanks to Ilya Kurdyukov for the original patch which was derived from a white paper from Intel [1] (published in 2009) and public domain code from [2] (released in 2016). [1] https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf [2] https://github.com/rawrunprotected/crc
2022-11-14 20:34:57 +01:00
include(CheckIncludeFile)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
include(CheckSymbolExists)
include(CheckStructHasMember)
liblzma: Add fast CRC64 for 32/64-bit x86 using SSSE3 + SSE4.1 + CLMUL. It also works on E2K as it supports these intrinsics. On x86-64 runtime detection is used so the code keeps working on older processors too. A CLMUL-only build can be done by using -msse4.1 -mpclmul in CFLAGS and this will reduce the library size since the generic implementation and its 8 KiB lookup table will be omitted. On 32-bit x86 this isn't used by default for now because by default on 32-bit x86 the separate assembly file crc64_x86.S is used. If --disable-assembler is used then this new CLMUL code is used the same way as on 64-bit x86. However, a CLMUL-only build (-msse4.1 -mpclmul) won't omit the 8 KiB lookup table on 32-bit x86 due to a currently-missing check for disabled assembler usage. The configure.ac check should be such that the code won't be built if something in the toolchain doesn't support it but --disable-clmul-crc option can be used to unconditionally disable this feature. CLMUL speeds up decompression of files that have compressed very well (assuming CRC64 is used as a check type). It is know that the CLMUL code is significantly slower than the generic code for tiny inputs (especially 1-8 bytes but up to 16 bytes). If that is a real-world problem then there is already a commented-out variant that uses the generic version for small inputs. Thanks to Ilya Kurdyukov for the original patch which was derived from a white paper from Intel [1] (published in 2009) and public domain code from [2] (released in 2016). [1] https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf [2] https://github.com/rawrunprotected/crc
2022-11-14 20:34:57 +01:00
include(CheckCSourceCompiles)
CMake: Use -D_FILE_OFFSET_BITS=64 if (and only if) needed. A CMake option LARGE_FILE_SUPPORT is created if and only if -D_FILE_OFFSET_BITS=64 affects sizeof(off_t). This is needed on many 32-bit platforms and even with 64-bit builds with MinGW-w64 to get support for files larger than 2 GiB.
2023-09-26 23:58:17 +02:00
include(cmake/tuklib_large_file_support.cmake)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
include(cmake/tuklib_integer.cmake)
include(cmake/tuklib_cpucores.cmake)
include(cmake/tuklib_physmem.cmake)
include(cmake/tuklib_progname.cmake)
include(cmake/tuklib_mbstr.cmake)
CMake: Rearrange the PACKAGE_ variables. The windres workaround now replaces spaces with \x20 so the package name isn't repeated. These changes will help with creation of liblzma.pc.
2023-09-30 00:13:13 +02:00
set(PACKAGE_NAME "XZ Utils")
set(PACKAGE_BUGREPORT "xz@tukaani.org")
Build: Update website URL.
2024-01-19 16:08:14 +01:00
set(PACKAGE_URL "https://xz.tukaani.org/xz-utils/")
CMake: Rearrange the PACKAGE_ variables. The windres workaround now replaces spaces with \x20 so the package name isn't repeated. These changes will help with creation of liblzma.pc.
2023-09-30 00:13:13 +02:00
# Get the package version from version.h into PACKAGE_VERSION variable.
file(READ src/liblzma/api/lzma/version.h PACKAGE_VERSION)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
string(REGEX REPLACE
"^.*\n\
#define LZMA_VERSION_MAJOR ([0-9]+)\n\
Build: Adjust CMake version search regex. Now, the LZMA_VERSION_MAJOR, LZMA_VERSION_MINOR, and LZMA_VERSION_PATCH macros do not need to be on consecutive lines in version.h. They can be separated by more whitespace, comments, or even other content, as long as they appear in the proper order (major, minor, patch).
2023-02-04 14:06:35 +01:00
.*\
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
#define LZMA_VERSION_MINOR ([0-9]+)\n\
Build: Adjust CMake version search regex. Now, the LZMA_VERSION_MAJOR, LZMA_VERSION_MINOR, and LZMA_VERSION_PATCH macros do not need to be on consecutive lines in version.h. They can be separated by more whitespace, comments, or even other content, as long as they appear in the proper order (major, minor, patch).
2023-02-04 14:06:35 +01:00
.*\
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
#define LZMA_VERSION_PATCH ([0-9]+)\n\
.*$"
CMake: Rearrange the PACKAGE_ variables. The windres workaround now replaces spaces with \x20 so the package name isn't repeated. These changes will help with creation of liblzma.pc.
2023-09-30 00:13:13 +02:00
"\\1.\\2.\\3" PACKAGE_VERSION "${PACKAGE_VERSION}")
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# Among other things, this gives us variables xz_VERSION and xz_VERSION_MAJOR.
CMake: Rearrange the PACKAGE_ variables. The windres workaround now replaces spaces with \x20 so the package name isn't repeated. These changes will help with creation of liblzma.pc.
2023-09-30 00:13:13 +02:00
project(xz VERSION "${PACKAGE_VERSION}" LANGUAGES C)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
CMake: Require that the C compiler supports C99 or a newer standard. Thanks to autoantwort for reporting the issue and suggesting a different patch: https://github.com/tukaani-project/xz/pull/42
2023-02-27 17:38:35 +01:00
# We need a compiler that supports enough C99 or newer (variable-length arrays
# aren't needed, those are optional in C17). Setting CMAKE_C_STANDARD here
# makes it the default for all targets. It doesn't affect the INTERFACE so
# liblzma::liblzma won't end up with INTERFACE_COMPILE_FEATURES "c_std_99"
# (the API headers are C89 and C++ compatible).
set(CMAKE_C_STANDARD 99)
set(CMAKE_C_STANDARD_REQUIRED ON)
Build: Don't build bundles on Apple OSes. Thanks to Daniel Packard.
2020-12-16 17:30:14 +01:00
# On Apple OSes, don't build executables as bundles:
set(CMAKE_MACOSX_BUNDLE OFF)
CMake: Fix windres issues again. At least on some systems, GNU windres needs --use-temp-file in addition to the \x20 hack to avoid spaces in the command line argument. Hovever, that \x20 syntax is broken with llvm-windres version 15.0.0 (results in "XZx20Utils") but luckily it works with a regular space. Thus it is best to limit the workarounds to GNU toolchain on Windows.
2023-01-09 22:41:25 +01:00
# windres from GNU binutils can be tricky with command line arguments
# that contain spaces or other funny characters. Unfortunately we need
# a space in PACKAGE_NAME. Using \x20 to encode the US-ASCII space seems
# to work in both cmd.exe and /bin/sh.
CMake/Windows: Add a workaround for windres from GNU binutils. Thanks to Iouri Kharon for the bug report and the original patch.
2023-01-07 18:48:52 +01:00
#
CMake: Fix windres issues again. At least on some systems, GNU windres needs --use-temp-file in addition to the \x20 hack to avoid spaces in the command line argument. Hovever, that \x20 syntax is broken with llvm-windres version 15.0.0 (results in "XZx20Utils") but luckily it works with a regular space. Thus it is best to limit the workarounds to GNU toolchain on Windows.
2023-01-09 22:41:25 +01:00
# However, even \x20 isn't enough in all situations, resulting in
# "syntax error" from windres. Using --use-temp-file prevents windres
# from using popen() and this seems to fix the problem.
CMake/Windows: Add a workaround for windres from GNU binutils. Thanks to Iouri Kharon for the bug report and the original patch.
2023-01-07 18:48:52 +01:00
#
CMake: Fix Windows build with Clang/LLVM 17. llvm-windres 17.0.0 has more accurate emulation of GNU windres, so the hack for GNU windres must now be used with llvm-windres too. LLVM 16.0.6 has the old behavior and there likely won't be more 16.x releases. So we can simply check for >= 17.0.0. See also: https://github.com/llvm/llvm-project/commit/2bcc0fdc58a220cb9921b47ec8a32c85f2511a47
2023-09-27 18:54:35 +02:00
# llvm-windres from Clang/LLVM 16.0.6 and older: The \x20 results
# in "XZx20Utils" in the compiled binary. The option --use-temp-file
# makes no difference.
#
# llvm-windres 17.0.0 and later: It emulates GNU windres more accurately, so
# the workarounds used with GNU windres must be used with llvm-windres too.
#
# CMake 3.27 doesn't have CMAKE_RC_COMPILER_ID so we rely on
# CMAKE_C_COMPILER_ID.
CMake/Windows: Fix when the windres workaround is applied. CMake doesn't set WIN32 on CYGWIN but the workaround is probably needed on Cygwin too. Same for MSYS and MSYS2. The workaround must not be used with Clang that is acting in MSVC mode. This fixes it by checking for the known environments that need the workaround instead of using "NOT MSVC". Thanks to Martin Storsjö. https://github.com/tukaani-project/xz/commit/0570308ddd9c0e39e85597ebc0e31d4fc81d436f#commitcomment-129098431
2023-10-06 17:55:57 +02:00
if((MINGW OR CYGWIN OR MSYS) AND (
NOT CMAKE_C_COMPILER_ID STREQUAL "Clang" OR
CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL "17"))
CMake: Fix Windows build with Clang/LLVM 17. llvm-windres 17.0.0 has more accurate emulation of GNU windres, so the hack for GNU windres must now be used with llvm-windres too. LLVM 16.0.6 has the old behavior and there likely won't be more 16.x releases. So we can simply check for >= 17.0.0. See also: https://github.com/llvm/llvm-project/commit/2bcc0fdc58a220cb9921b47ec8a32c85f2511a47
2023-09-27 18:54:35 +02:00
# Use workarounds with GNU windres and llvm-windres >= 17.0.0. The \x20
CMake: Rearrange the PACKAGE_ variables. The windres workaround now replaces spaces with \x20 so the package name isn't repeated. These changes will help with creation of liblzma.pc.
2023-09-30 00:13:13 +02:00
# in PACKAGE_NAME_DEFINITION works with gcc and clang too so we don't need
# to worry how to pass different flags to windres and the C compiler.
CMake: Generate and install liblzma.pc if not using MSVC. Autotools based build uses -pthread and thus adds it to Libs.private in liblzma.pc. CMake doesn't use -pthread at all if pthread functions are available in libc so Libs.private doesn't get -pthread either.
2023-09-30 01:14:25 +02:00
# Keep the original PACKAGE_NAME intact for generation of liblzma.pc.
CMake: Fix appending to CMAKE_RC_FLAGS. It's a string, not a list. It only worked when the variable was empty. Thanks to Iouri Kharon.
2023-01-10 07:29:32 +01:00
string(APPEND CMAKE_RC_FLAGS " --use-temp-file")
CMake: Rearrange the PACKAGE_ variables. The windres workaround now replaces spaces with \x20 so the package name isn't repeated. These changes will help with creation of liblzma.pc.
2023-09-30 00:13:13 +02:00
string(REPLACE " " "\\x20" PACKAGE_NAME_DEFINITION "${PACKAGE_NAME}")
CMake/Windows: Add a workaround for windres from GNU binutils. Thanks to Iouri Kharon for the bug report and the original patch.
2023-01-07 18:48:52 +01:00
else()
CMake: Fix windres issues again. At least on some systems, GNU windres needs --use-temp-file in addition to the \x20 hack to avoid spaces in the command line argument. Hovever, that \x20 syntax is broken with llvm-windres version 15.0.0 (results in "XZx20Utils") but luckily it works with a regular space. Thus it is best to limit the workarounds to GNU toolchain on Windows.
2023-01-09 22:41:25 +01:00
# Elsewhere a space is safe. This also keeps things compatible with
# EBCDIC in case CMake-based build is ever done on such a system.
CMake: Rearrange the PACKAGE_ variables. The windres workaround now replaces spaces with \x20 so the package name isn't repeated. These changes will help with creation of liblzma.pc.
2023-09-30 00:13:13 +02:00
set(PACKAGE_NAME_DEFINITION "${PACKAGE_NAME}")
CMake/Windows: Add a workaround for windres from GNU binutils. Thanks to Iouri Kharon for the bug report and the original patch.
2023-01-07 18:48:52 +01:00
endif()
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# Definitions common to all targets:
add_compile_definitions(
# Package info:
CMake: Rearrange the PACKAGE_ variables. The windres workaround now replaces spaces with \x20 so the package name isn't repeated. These changes will help with creation of liblzma.pc.
2023-09-30 00:13:13 +02:00
PACKAGE_NAME="${PACKAGE_NAME_DEFINITION}"
PACKAGE_BUGREPORT="${PACKAGE_BUGREPORT}"
PACKAGE_URL="${PACKAGE_URL}"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# Standard headers and types are available:
HAVE_STDBOOL_H
HAVE__BOOL
HAVE_STDINT_H
HAVE_INTTYPES_H
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
# Always enable CRC32 since liblzma should never build without it.
HAVE_CHECK_CRC32
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# Disable assert() checks when no build type has been specified. Non-empty
# build types like "Release" and "Debug" handle this by default.
$<$<CONFIG:>:NDEBUG>
)
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
######################
# System definitions #
######################
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# _GNU_SOURCE and such definitions. This specific macro is special since
# it also adds the definitions to CMAKE_REQUIRED_DEFINITIONS.
tuklib_use_system_extensions(ALL)
CMake: Use -D_FILE_OFFSET_BITS=64 if (and only if) needed. A CMake option LARGE_FILE_SUPPORT is created if and only if -D_FILE_OFFSET_BITS=64 affects sizeof(off_t). This is needed on many 32-bit platforms and even with 64-bit builds with MinGW-w64 to get support for files larger than 2 GiB.
2023-09-26 23:58:17 +02:00
# Check for large file support. It's required on some 32-bit platforms and
# even on 64-bit MinGW-w64 to get 64-bit off_t. This can be forced off on
# the CMake command line if needed: -DLARGE_FILE_SUPPORT=OFF
tuklib_large_file_support(ALL)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# This is needed by liblzma and xz.
tuklib_integer(ALL)
CMake: Generate and install liblzma.pc if not using MSVC. Autotools based build uses -pthread and thus adds it to Libs.private in liblzma.pc. CMake doesn't use -pthread at all if pthread functions are available in libc so Libs.private doesn't get -pthread either.
2023-09-30 01:14:25 +02:00
# This is used for liblzma.pc generation to add -lrt if needed.
set(LIBS)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# Check for clock_gettime(). Do this before checking for threading so
# that we know there if CLOCK_MONOTONIC is available.
CMake: Check for clock_gettime() even on Windows. This mirrors configure.ac although currently MinGW-w64 builds don't use clock_gettime() even if it is found.
2023-09-23 02:06:36 +02:00
check_symbol_exists(clock_gettime time.h HAVE_CLOCK_GETTIME)
if(NOT HAVE_CLOCK_GETTIME)
# With glibc <= 2.17 or Solaris 10 this needs librt.
# Add librt for the next check for HAVE_CLOCK_GETTIME. If it is
# found after including the library, we know that librt is required.
list(INSERT CMAKE_REQUIRED_LIBRARIES 0 rt)
check_symbol_exists(clock_gettime time.h HAVE_CLOCK_GETTIME_LIBRT)
# If it was found now, add librt to all targets and keep it in
# CMAKE_REQUIRED_LIBRARIES for further tests too.
if(HAVE_CLOCK_GETTIME_LIBRT)
link_libraries(rt)
CMake: Generate and install liblzma.pc if not using MSVC. Autotools based build uses -pthread and thus adds it to Libs.private in liblzma.pc. CMake doesn't use -pthread at all if pthread functions are available in libc so Libs.private doesn't get -pthread either.
2023-09-30 01:14:25 +02:00
set(LIBS "-lrt") # For liblzma.pc
CMake: Check for clock_gettime() even on Windows. This mirrors configure.ac although currently MinGW-w64 builds don't use clock_gettime() even if it is found.
2023-09-23 02:06:36 +02:00
else()
list(REMOVE_AT CMAKE_REQUIRED_LIBRARIES 0)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
endif()
CMake: Check for clock_gettime() even on Windows. This mirrors configure.ac although currently MinGW-w64 builds don't use clock_gettime() even if it is found.
2023-09-23 02:06:36 +02:00
endif()
CMake: Fix time.h checks not running on second CMake run. If CMake was configured more than once, HAVE_CLOCK_GETTIME and HAVE_CLOCK_MONOTONIC would not be set as compile definitions. The check for librt being needed to provide HAVE_CLOCK_GETTIME was also simplified.
2023-09-12 16:36:12 +02:00
CMake: Check for clock_gettime() even on Windows. This mirrors configure.ac although currently MinGW-w64 builds don't use clock_gettime() even if it is found.
2023-09-23 02:06:36 +02:00
if(HAVE_CLOCK_GETTIME OR HAVE_CLOCK_GETTIME_LIBRT)
add_compile_definitions(HAVE_CLOCK_GETTIME)
CMake: Fix unconditionally defining HAVE_CLOCK_MONOTONIC. If HAVE_CLOCK_GETTIME was defined, then HAVE_CLOCK_MONOTONIC was always added as a compile definition even if the check for it failed.
2023-09-12 16:34:06 +02:00
CMake: Check for clock_gettime() even on Windows. This mirrors configure.ac although currently MinGW-w64 builds don't use clock_gettime() even if it is found.
2023-09-23 02:06:36 +02:00
# Check if CLOCK_MONOTONIC is available for clock_gettime().
check_symbol_exists(CLOCK_MONOTONIC time.h HAVE_CLOCK_MONOTONIC)
tuklib_add_definition_if(ALL HAVE_CLOCK_MONOTONIC)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
endif()
# Options for new enough GCC or Clang on any arch or operating system:
if(CMAKE_C_COMPILER_ID MATCHES GNU|Clang)
# configure.ac has a long list but it won't be copied here:
add_compile_options(-Wall -Wextra)
endif()
#############################################################################
# liblzma
#############################################################################
option(BUILD_SHARED_LIBS "Build liblzma as a shared library instead of static")
add_library(liblzma
src/common/mythread.h
src/common/sysdefs.h
src/common/tuklib_common.h
src/common/tuklib_config.h
src/common/tuklib_integer.h
src/common/tuklib_physmem.c
src/common/tuklib_physmem.h
src/liblzma/api/lzma.h
src/liblzma/api/lzma/base.h
src/liblzma/api/lzma/bcj.h
src/liblzma/api/lzma/block.h
src/liblzma/api/lzma/check.h
src/liblzma/api/lzma/container.h
src/liblzma/api/lzma/delta.h
src/liblzma/api/lzma/filter.h
src/liblzma/api/lzma/hardware.h
src/liblzma/api/lzma/index.h
src/liblzma/api/lzma/index_hash.h
src/liblzma/api/lzma/lzma12.h
src/liblzma/api/lzma/stream_flags.h
src/liblzma/api/lzma/version.h
src/liblzma/api/lzma/vli.h
src/liblzma/check/check.c
src/liblzma/check/check.h
liblzma: Rename crc_macros.h to crc_common.h.
2023-10-12 19:07:50 +02:00
src/liblzma/check/crc_common.h
liblzma: Avoid extern lzma_crc32_clmul() and lzma_crc64_clmul(). A CLMUL-only build will have the crcxx_clmul() inlined into lzma_crcxx(). Previously a jump to the extern lzma_crcxx_clmul() was needed. Notes about shared liblzma on ELF platforms: - On platforms that support ifunc and -fvisibility=hidden, this was silly because CLMUL-only build would have that single extra jump instruction of extra overhead. - On platforms that support neither -fvisibility=hidden nor linker version script (liblzma*.map), jumping to lzma_crcxx_clmul() would go via PLT so a few more instructions of overhead (still not a big issue but silly nevertheless). There was a downside with static liblzma too: if an application only needs lzma_crc64(), static linking would make the linker include the CLMUL code for both CRC32 and CRC64 from crc_x86_clmul.o even though the CRC32 code wouldn't be needed, thus increasing code size of the executable (assuming that -ffunction-sections isn't used). Also, now compilers are likely to inline crc_simd_body() even if they don't support the always_inline attribute (or MSVC's __forceinline). Quite possibly all compilers that build the code do support such an attribute. But now it likely isn't a problem even if the attribute wasn't supported. Now all x86-specific stuff is in crc_x86_clmul.h. If other archs The other archs can then have their own headers with their own is_clmul_supported() and crcxx_clmul(). Another bonus is that the build system doesn't need to care if crc_clmul.c is needed. is_clmul_supported() stays as inline function as it's not needed when doing a CLMUL-only build (avoids a warning about unused function).
2023-10-20 22:35:10 +02:00
src/liblzma/check/crc_x86_clmul.h
liblzma: Rename crc32_aarch64.h to crc32_arm64.h. Even though the proper name for the architecture is aarch64, this project uses ARM64 throughout. So the rename is for consistency. Additionally, crc32_arm64.h was slightly refactored for the following changes: * Added MSVC, FreeBSD, and macOS support in is_arch_extension_supported(). * crc32_arch_optimized() now checks the size when aligning the buffer. * crc32_arch_optimized() loop conditions were slightly modified to avoid both decrementing the size and incrementing the buffer pointer. * Use the intrinsic wrappers defined in <arm_acle.h> because GCC and Clang name them differently. * Minor spacing and comment changes.
2024-01-22 13:54:56 +01:00
src/liblzma/check/crc32_arm64.h
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
src/liblzma/common/block_util.c
src/liblzma/common/common.c
src/liblzma/common/common.h
src/liblzma/common/easy_preset.c
src/liblzma/common/easy_preset.h
src/liblzma/common/filter_common.c
src/liblzma/common/filter_common.h
src/liblzma/common/hardware_physmem.c
src/liblzma/common/index.c
src/liblzma/common/index.h
src/liblzma/common/memcmplen.h
src/liblzma/common/stream_flags_common.c
src/liblzma/common/stream_flags_common.h
Build: Add string_conversion.c to CMake, DOS, and VS files.
2022-11-30 16:50:17 +01:00
src/liblzma/common/string_conversion.c
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
src/liblzma/common/vli_size.c
)
target_include_directories(liblzma PRIVATE
src/liblzma/api
src/liblzma/common
src/liblzma/check
src/liblzma/lz
src/liblzma/rangecoder
src/liblzma/lzma
src/liblzma/delta
src/liblzma/simple
src/common
)
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
######################
# Size optimizations #
######################
option(ENABLE_SMALL "Reduce code size at expense of speed. \
This may be useful together with CMAKE_BUILD_TYPE=MinSizeRel.")
if(ENABLE_SMALL)
add_compile_definitions(HAVE_SMALL)
endif()
##########
# Checks #
##########
set(ADDITIONAL_SUPPORTED_CHECKS crc64 sha256)
set(ADDITIONAL_CHECK_TYPES "${ADDITIONAL_SUPPORTED_CHECKS}" CACHE STRING
"Additional check types to support (crc32 is always built)")
foreach(CHECK IN LISTS ADDITIONAL_CHECK_TYPES)
if(NOT CHECK IN_LIST ADDITIONAL_SUPPORTED_CHECKS)
CMake: Use FATAL_ERROR if user-supplied options aren't understood. This way typos are caught quickly and compounding error messages are avoided (a single typo could cause more than one error). This keeps using SEND_ERROR when the system is lacking a feature (like threading library or sandboxing method). This way the whole configuration log will be generated in case someone wishes to report a problem upstream.
2023-10-09 19:59:24 +02:00
message(FATAL_ERROR "'${CHECK}' is not a supported check type")
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
endif()
endforeach()
if(ENABLE_SMALL)
target_sources(liblzma PRIVATE src/liblzma/check/crc32_small.c)
else()
target_sources(liblzma PRIVATE
src/liblzma/check/crc32_fast.c
src/liblzma/check/crc32_table.c
src/liblzma/check/crc32_table_be.h
src/liblzma/check/crc32_table_le.h
)
endif()
if("crc64" IN_LIST ADDITIONAL_CHECK_TYPES)
add_compile_definitions("HAVE_CHECK_CRC64")
if(ENABLE_SMALL)
target_sources(liblzma PRIVATE src/liblzma/check/crc64_small.c)
else()
target_sources(liblzma PRIVATE
src/liblzma/check/crc64_fast.c
src/liblzma/check/crc64_table.c
src/liblzma/check/crc64_table_be.h
src/liblzma/check/crc64_table_le.h
)
endif()
endif()
if("sha256" IN_LIST ADDITIONAL_CHECK_TYPES)
add_compile_definitions("HAVE_CHECK_SHA256")
target_sources(liblzma PRIVATE src/liblzma/check/sha256.c)
endif()
#################
# Match finders #
#################
set(SUPPORTED_MATCH_FINDERS hc3 hc4 bt2 bt3 bt4)
set(MATCH_FINDERS "${SUPPORTED_MATCH_FINDERS}" CACHE STRING
"Match finders to support (at least one is required for LZMA1 or LZMA2)")
foreach(MF IN LISTS MATCH_FINDERS)
if(MF IN_LIST SUPPORTED_MATCH_FINDERS)
string(TOUPPER "${MF}" MF_UPPER)
add_compile_definitions("HAVE_MF_${MF_UPPER}")
else()
CMake: Use FATAL_ERROR if user-supplied options aren't understood. This way typos are caught quickly and compounding error messages are avoided (a single typo could cause more than one error). This keeps using SEND_ERROR when the system is lacking a feature (like threading library or sandboxing method). This way the whole configuration log will be generated in case someone wishes to report a problem upstream.
2023-10-09 19:59:24 +02:00
message(FATAL_ERROR "'${MF}' is not a supported match finder")
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
endif()
endforeach()
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
#############
# Threading #
#############
CMake: Edit threading related messages. It's mostly to change from "thread method" to "threading method".
2023-10-09 20:12:31 +02:00
# Supported threading methods:
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
# ON - autodetect the best threading method. The autodetection will
# prefer Windows threading (win95 or vista) over posix if both are
# available. vista threads will be used over win95 unless it is a
# 32-bit build.
# OFF - Disable threading.
CMake: Edit threading related messages. It's mostly to change from "thread method" to "threading method".
2023-10-09 20:12:31 +02:00
# posix - Use posix threading (pthreads), or throw an error if not available.
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
# win95 - Use Windows win95 threading, or throw an error if not available.
# vista - Use Windows vista threading, or throw an error if not available.
CMake: Edit threading related messages. It's mostly to change from "thread method" to "threading method".
2023-10-09 20:12:31 +02:00
set(SUPPORTED_THREADING_METHODS ON OFF posix win95 vista)
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
set(ENABLE_THREADS ON CACHE STRING
CMake: Edit threading related messages. It's mostly to change from "thread method" to "threading method".
2023-10-09 20:12:31 +02:00
"Threading method: Set to 'ON' to autodetect, 'OFF' to disable threading.")
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
# Create dropdown in CMake GUI since only 1 threading method is possible
# to select in a build.
set_property(CACHE ENABLE_THREADS
CMake: Edit threading related messages. It's mostly to change from "thread method" to "threading method".
2023-10-09 20:12:31 +02:00
PROPERTY STRINGS "${SUPPORTED_THREADING_METHODS}")
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
CMake: Conditionally allow win95 threads and --enable-small.
2023-08-09 14:54:15 +02:00
# This is a flag variable set when win95 threads are used. We must ensure
# the combination of enable_small and win95 threads is not used without a
# compiler supporting attribute __constructor__.
set(USE_WIN95_THREADS OFF)
CMake: Don't shadow the cache entry ENABLE_THREADS with a normal variable. Using set(ENABLE_THREADS "posix") is confusing because it sets a new normal variable and leaves the cache entry with the same name unchanged. The intent wasn't to change the cache entry so this switches to a different variable name.
2023-10-11 18:47:44 +02:00
# This is a flag variable set when posix threads (pthreads) are used.
# It's needed when creating liblzma-config.cmake where dependency on
# Threads::Threads is only needed with pthreads.
set(USE_POSIX_THREADS OFF)
CMake: Edit threading related messages. It's mostly to change from "thread method" to "threading method".
2023-10-09 20:12:31 +02:00
if(NOT ENABLE_THREADS IN_LIST SUPPORTED_THREADING_METHODS)
message(FATAL_ERROR "'${ENABLE_THREADS}' is not a supported "
"threading method")
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
endif()
if(ENABLE_THREADS)
# Also set THREADS_PREFER_PTHREAD_FLAG since the flag has no effect
# for Windows threading.
set(THREADS_PREFER_PTHREAD_FLAG TRUE)
find_package(Threads REQUIRED)
# If both Windows and posix threading are available, prefer Windows.
CMake: Add a comment about threads on Cygwin.
2023-09-21 19:36:31 +02:00
# Note that on Cygwin CMAKE_USE_WIN32_THREADS_INIT is false.
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
if(CMAKE_USE_WIN32_THREADS_INIT AND NOT ENABLE_THREADS STREQUAL "posix")
if(ENABLE_THREADS STREQUAL "win95"
OR (ENABLE_THREADS STREQUAL "ON"
CMake: Edit threading related messages. It's mostly to change from "thread method" to "threading method".
2023-10-09 20:12:31 +02:00
AND CMAKE_SIZEOF_VOID_P EQUAL 4))
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
# Use Windows 95 (and thus XP) compatible threads.
# This avoids use of features that were added in
# Windows Vista. This is used for 32-bit x86 builds for
# compatibility reasons since it makes no measurable difference
# in performance compared to Vista threads.
CMake: Conditionally allow win95 threads and --enable-small.
2023-08-09 14:54:15 +02:00
set(USE_WIN95_THREADS ON)
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
add_compile_definitions(MYTHREAD_WIN95)
else()
add_compile_definitions(MYTHREAD_VISTA)
endif()
elseif(CMAKE_USE_PTHREADS_INIT)
if(ENABLE_THREADS STREQUAL "posix" OR ENABLE_THREADS STREQUAL "ON")
# The threading library only needs to be explicitly linked
# for posix threads, so this is needed for creating
# liblzma-config.cmake later.
CMake: Don't shadow the cache entry ENABLE_THREADS with a normal variable. Using set(ENABLE_THREADS "posix") is confusing because it sets a new normal variable and leaves the cache entry with the same name unchanged. The intent wasn't to change the cache entry so this switches to a different variable name.
2023-10-11 18:47:44 +02:00
set(USE_POSIX_THREADS ON)
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
target_link_libraries(liblzma Threads::Threads)
add_compile_definitions(MYTHREAD_POSIX)
CMake: Wrap two overlong lines that are possible to wrap.
2023-09-21 19:42:52 +02:00
# Check if pthread_condattr_setclock() exists to
# use CLOCK_MONOTONIC.
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
if(HAVE_CLOCK_MONOTONIC)
CMake: Wrap two overlong lines that are possible to wrap.
2023-09-21 19:42:52 +02:00
list(INSERT CMAKE_REQUIRED_LIBRARIES 0
"${CMAKE_THREAD_LIBS_INIT}")
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
check_symbol_exists(pthread_condattr_setclock pthread.h
HAVE_PTHREAD_CONDATTR_SETCLOCK)
tuklib_add_definition_if(ALL HAVE_PTHREAD_CONDATTR_SETCLOCK)
endif()
else()
message(SEND_ERROR
CMake: Edit threading related messages. It's mostly to change from "thread method" to "threading method".
2023-10-09 20:12:31 +02:00
"Windows threading method was requested but a compatible "
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
"library could not be found")
endif()
else()
message(SEND_ERROR "No supported threading library found")
endif()
target_sources(liblzma PRIVATE
src/common/tuklib_cpucores.c
src/common/tuklib_cpucores.h
src/liblzma/common/hardware_cputhreads.c
src/liblzma/common/outqueue.c
src/liblzma/common/outqueue.h
)
endif()
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
############
# Encoders #
############
set(SIMPLE_FILTERS
x86
arm
armthumb
arm64
powerpc
ia64
sparc
CMake: Support RISC-V BCJ Filter for encoding and decoding.
2024-01-22 16:33:39 +01:00
riscv
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
)
# The SUPPORTED_FILTERS are shared between Encoders and Decoders
# since only lzip does not appear in both lists. lzip is a special
# case anyway, so it is handled separately in the Decoders section.
set(SUPPORTED_FILTERS
lzma1
lzma2
delta
"${SIMPLE_FILTERS}"
)
set(ENCODERS "${SUPPORTED_FILTERS}" CACHE STRING "Encoders to support")
# If LZMA2 is enabled, then LZMA1 must also be enabled.
if(NOT "lzma1" IN_LIST ENCODERS AND "lzma2" IN_LIST ENCODERS)
CMake: Use FATAL_ERROR if user-supplied options aren't understood. This way typos are caught quickly and compounding error messages are avoided (a single typo could cause more than one error). This keeps using SEND_ERROR when the system is lacking a feature (like threading library or sandboxing method). This way the whole configuration log will be generated in case someone wishes to report a problem upstream.
2023-10-09 19:59:24 +02:00
message(FATAL_ERROR "LZMA2 encoder requires that LZMA1 is also enabled")
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
endif()
# If LZMA1 is enabled, then at least one match finder must be enabled.
if(MATCH_FINDERS STREQUAL "" AND "lzma1" IN_LIST ENCODERS)
CMake: Use FATAL_ERROR if user-supplied options aren't understood. This way typos are caught quickly and compounding error messages are avoided (a single typo could cause more than one error). This keeps using SEND_ERROR when the system is lacking a feature (like threading library or sandboxing method). This way the whole configuration log will be generated in case someone wishes to report a problem upstream.
2023-10-09 19:59:24 +02:00
message(FATAL_ERROR "At least 1 match finder is required for an "
"LZ-based encoder")
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
endif()
set(HAVE_DELTA_CODER OFF)
set(SIMPLE_ENCODERS OFF)
set(HAVE_ENCODERS OFF)
foreach(ENCODER IN LISTS ENCODERS)
if(ENCODER IN_LIST SUPPORTED_FILTERS)
set(HAVE_ENCODERS ON)
if(NOT SIMPLE_ENCODERS AND ENCODER IN_LIST SIMPLE_FILTERS)
set(SIMPLE_ENCODERS ON)
endif()
string(TOUPPER "${ENCODER}" ENCODER_UPPER)
add_compile_definitions("HAVE_ENCODER_${ENCODER_UPPER}")
else()
CMake: Use FATAL_ERROR if user-supplied options aren't understood. This way typos are caught quickly and compounding error messages are avoided (a single typo could cause more than one error). This keeps using SEND_ERROR when the system is lacking a feature (like threading library or sandboxing method). This way the whole configuration log will be generated in case someone wishes to report a problem upstream.
2023-10-09 19:59:24 +02:00
message(FATAL_ERROR "'${ENCODER}' is not a supported encoder")
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
endif()
endforeach()
if(HAVE_ENCODERS)
add_compile_definitions(HAVE_ENCODERS)
target_sources(liblzma PRIVATE
src/liblzma/common/alone_encoder.c
src/liblzma/common/block_buffer_encoder.c
src/liblzma/common/block_buffer_encoder.h
src/liblzma/common/block_encoder.c
src/liblzma/common/block_encoder.h
src/liblzma/common/block_header_encoder.c
src/liblzma/common/easy_buffer_encoder.c
src/liblzma/common/easy_encoder.c
src/liblzma/common/easy_encoder_memusage.c
src/liblzma/common/filter_buffer_encoder.c
src/liblzma/common/filter_encoder.c
src/liblzma/common/filter_encoder.h
src/liblzma/common/filter_flags_encoder.c
src/liblzma/common/index_encoder.c
src/liblzma/common/index_encoder.h
src/liblzma/common/stream_buffer_encoder.c
src/liblzma/common/stream_encoder.c
src/liblzma/common/stream_flags_encoder.c
src/liblzma/common/vli_encoder.c
)
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
if(ENABLE_THREADS)
target_sources(liblzma PRIVATE
src/liblzma/common/stream_encoder_mt.c
)
endif()
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
if(SIMPLE_ENCODERS)
target_sources(liblzma PRIVATE
src/liblzma/simple/simple_encoder.c
src/liblzma/simple/simple_encoder.h
)
endif()
if("lzma1" IN_LIST ENCODERS)
target_sources(liblzma PRIVATE
src/liblzma/lzma/lzma_encoder.c
src/liblzma/lzma/lzma_encoder.h
src/liblzma/lzma/lzma_encoder_optimum_fast.c
src/liblzma/lzma/lzma_encoder_optimum_normal.c
src/liblzma/lzma/lzma_encoder_private.h
src/liblzma/lzma/fastpos.h
src/liblzma/lz/lz_encoder.c
src/liblzma/lz/lz_encoder.h
src/liblzma/lz/lz_encoder_hash.h
src/liblzma/lz/lz_encoder_hash_table.h
src/liblzma/lz/lz_encoder_mf.c
src/liblzma/rangecoder/price.h
src/liblzma/rangecoder/price_table.c
src/liblzma/rangecoder/range_encoder.h
)
if(NOT ENABLE_SMALL)
target_sources(liblzma PRIVATE src/liblzma/lzma/fastpos_table.c)
endif()
endif()
if("lzma2" IN_LIST ENCODERS)
target_sources(liblzma PRIVATE
src/liblzma/lzma/lzma2_encoder.c
src/liblzma/lzma/lzma2_encoder.h
)
endif()
if("delta" IN_LIST ENCODERS)
set(HAVE_DELTA_CODER ON)
target_sources(liblzma PRIVATE
src/liblzma/delta/delta_encoder.c
src/liblzma/delta/delta_encoder.h
)
endif()
endif()
############
# Decoders #
############
set(DECODERS "${SUPPORTED_FILTERS}" CACHE STRING "Decoders to support")
set(SIMPLE_DECODERS OFF)
set(HAVE_DECODERS OFF)
foreach(DECODER IN LISTS DECODERS)
if(DECODER IN_LIST SUPPORTED_FILTERS)
set(HAVE_DECODERS ON)
if(NOT SIMPLE_DECODERS AND DECODER IN_LIST SIMPLE_FILTERS)
set(SIMPLE_DECODERS ON)
endif()
string(TOUPPER "${DECODER}" DECODER_UPPER)
add_compile_definitions("HAVE_DECODER_${DECODER_UPPER}")
else()
CMake: Use FATAL_ERROR if user-supplied options aren't understood. This way typos are caught quickly and compounding error messages are avoided (a single typo could cause more than one error). This keeps using SEND_ERROR when the system is lacking a feature (like threading library or sandboxing method). This way the whole configuration log will be generated in case someone wishes to report a problem upstream.
2023-10-09 19:59:24 +02:00
message(FATAL_ERROR "'${DECODER}' is not a supported decoder")
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
endif()
endforeach()
if(HAVE_DECODERS)
add_compile_definitions(HAVE_DECODERS)
target_sources(liblzma PRIVATE
src/liblzma/common/alone_decoder.c
src/liblzma/common/alone_decoder.h
src/liblzma/common/auto_decoder.c
src/liblzma/common/block_buffer_decoder.c
src/liblzma/common/block_decoder.c
src/liblzma/common/block_decoder.h
src/liblzma/common/block_header_decoder.c
src/liblzma/common/easy_decoder_memusage.c
src/liblzma/common/file_info.c
src/liblzma/common/filter_buffer_decoder.c
src/liblzma/common/filter_decoder.c
src/liblzma/common/filter_decoder.h
src/liblzma/common/filter_flags_decoder.c
src/liblzma/common/index_decoder.c
src/liblzma/common/index_decoder.h
src/liblzma/common/index_hash.c
src/liblzma/common/stream_buffer_decoder.c
src/liblzma/common/stream_decoder.c
src/liblzma/common/stream_flags_decoder.c
src/liblzma/common/stream_decoder.h
src/liblzma/common/vli_decoder.c
)
CMake: Allows setting thread method. The thread method is now configurable for the CMake build. It matches the Autotools build by allowing ON (pick the best threading method), OFF (no threading), posix, win95, and vista. If both Windows and posix threading are both available, then ON will choose Windows threading. Windows threading will also not use: target_link_libraries(liblzma Threads::Threads) since on systems like MinGW-w64 it would link the posix threads without purpose.
2023-03-28 16:25:33 +02:00
if(ENABLE_THREADS)
target_sources(liblzma PRIVATE
src/liblzma/common/stream_decoder_mt.c
)
endif()
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
if(SIMPLE_DECODERS)
target_sources(liblzma PRIVATE
src/liblzma/simple/simple_decoder.c
src/liblzma/simple/simple_decoder.h
)
endif()
if("lzma1" IN_LIST DECODERS)
target_sources(liblzma PRIVATE
src/liblzma/lzma/lzma_decoder.c
src/liblzma/lzma/lzma_decoder.h
src/liblzma/rangecoder/range_decoder.h
src/liblzma/lz/lz_decoder.c
src/liblzma/lz/lz_decoder.h
)
endif()
if("lzma2" IN_LIST DECODERS)
target_sources(liblzma PRIVATE
src/liblzma/lzma/lzma2_decoder.c
src/liblzma/lzma/lzma2_decoder.h
)
endif()
if("delta" IN_LIST DECODERS)
set(HAVE_DELTA_CODER ON)
target_sources(liblzma PRIVATE
src/liblzma/delta/delta_decoder.c
src/liblzma/delta/delta_decoder.h
)
endif()
endif()
# Some sources must appear if the filter is configured as either
# an encoder or decoder.
if("lzma1" IN_LIST ENCODERS OR "lzma1" IN_LIST DECODERS)
target_sources(liblzma PRIVATE
src/liblzma/rangecoder/range_common.h
src/liblzma/lzma/lzma_encoder_presets.c
src/liblzma/lzma/lzma_common.h
)
endif()
if(HAVE_DELTA_CODER)
target_sources(liblzma PRIVATE
src/liblzma/delta/delta_common.c
src/liblzma/delta/delta_common.h
src/liblzma/delta/delta_private.h
)
endif()
if(SIMPLE_ENCODERS OR SIMPLE_DECODERS)
target_sources(liblzma PRIVATE
src/liblzma/simple/simple_coder.c
src/liblzma/simple/simple_coder.h
src/liblzma/simple/simple_private.h
)
endif()
foreach(SIMPLE_CODER IN LISTS SIMPLE_FILTERS)
if(SIMPLE_CODER IN_LIST ENCODERS OR SIMPLE_CODER IN_LIST DECODERS)
target_sources(liblzma PRIVATE "src/liblzma/simple/${SIMPLE_CODER}.c")
endif()
endforeach()
#############
# MicroLZMA #
#############
option(MICROLZMA_ENCODER
"MicroLZMA encoder (needed by specific applications only)" ON)
option(MICROLZMA_DECODER
"MicroLZMA decoder (needed by specific applications only)" ON)
if(MICROLZMA_ENCODER)
if(NOT "lzma1" IN_LIST ENCODERS)
CMake: Use FATAL_ERROR if user-supplied options aren't understood. This way typos are caught quickly and compounding error messages are avoided (a single typo could cause more than one error). This keeps using SEND_ERROR when the system is lacking a feature (like threading library or sandboxing method). This way the whole configuration log will be generated in case someone wishes to report a problem upstream.
2023-10-09 19:59:24 +02:00
message(FATAL_ERROR "The LZMA1 encoder is required to support the "
"MicroLZMA encoder")
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
endif()
target_sources(liblzma PRIVATE src/liblzma/common/microlzma_encoder.c)
endif()
if(MICROLZMA_DECODER)
if(NOT "lzma1" IN_LIST DECODERS)
CMake: Use FATAL_ERROR if user-supplied options aren't understood. This way typos are caught quickly and compounding error messages are avoided (a single typo could cause more than one error). This keeps using SEND_ERROR when the system is lacking a feature (like threading library or sandboxing method). This way the whole configuration log will be generated in case someone wishes to report a problem upstream.
2023-10-09 19:59:24 +02:00
message(FATAL_ERROR "The LZMA1 decoder is required to support the "
"MicroLZMA decoder")
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
endif()
target_sources(liblzma PRIVATE src/liblzma/common/microlzma_decoder.c)
endif()
#############################
# lzip (.lz) format support #
#############################
option(LZIP_DECODER "Support lzip decoder" ON)
if(LZIP_DECODER)
# If lzip decoder support is requested, make sure LZMA1 decoder is enabled.
if(NOT "lzma1" IN_LIST DECODERS)
CMake: Use FATAL_ERROR if user-supplied options aren't understood. This way typos are caught quickly and compounding error messages are avoided (a single typo could cause more than one error). This keeps using SEND_ERROR when the system is lacking a feature (like threading library or sandboxing method). This way the whole configuration log will be generated in case someone wishes to report a problem upstream.
2023-10-09 19:59:24 +02:00
message(FATAL_ERROR "The LZMA1 decoder is required to support the "
"lzip decoder")
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
endif()
add_compile_definitions(HAVE_LZIP_DECODER)
target_sources(liblzma PRIVATE
src/liblzma/common/lzip_decoder.c
src/liblzma/common/lzip_decoder.h
)
endif()
CMake: Move sandbox detection outside of xz section. The sandbox is now enabled for xzdec as well, so it no longer belongs in just the xz section. xz and xzdec are always built, except for older MSVC versions, so there isn't a need to conditionally show the sandbox configuration. CMake will do a little unecessary work on older MSVC versions that can't build xz or xzdec, but this is a very small downside.
2023-12-20 15:39:13 +01:00
##############
# Sandboxing #
##############
# ON Use sandboxing if a supported method is available in the OS.
# OFF Disable sandboxing.
# capsicum Require Capsicum (FreeBSD >= 10.2) and fail if not found.
# pledge Require pledge(2) (OpenBSD >= 5.9) and fail if not found.
# landlock Require Landlock (Linux >= 5.13) and fail if not found.
set(SUPPORTED_SANDBOX_METHODS ON OFF capsicum pledge landlock)
set(ENABLE_SANDBOX ON CACHE STRING
"Sandboxing method to use in 'xz' and 'xzdec'")
set_property(CACHE ENABLE_SANDBOX
PROPERTY STRINGS "${SUPPORTED_SANDBOX_METHODS}")
if(NOT ENABLE_SANDBOX IN_LIST SUPPORTED_SANDBOX_METHODS)
message(FATAL_ERROR "'${ENABLE_SANDBOX}' is not a supported "
"sandboxing method")
endif()
# When autodetecting, the search order is fixed and we must not find
# more than one method.
if(ENABLE_SANDBOX STREQUAL "OFF")
set(SANDBOX_FOUND ON)
else()
set(SANDBOX_FOUND OFF)
endif()
# Since xz and xzdec can both use sandboxing, the compile definition needed
# to use the sandbox must be added to both targets.
set(SANDBOX_COMPILE_DEFINITION OFF)
# Sandboxing: Capsicum
if(NOT SANDBOX_FOUND AND ENABLE_SANDBOX MATCHES "^ON$|^capsicum$")
check_symbol_exists(cap_rights_limit sys/capsicum.h
HAVE_CAP_RIGHTS_LIMIT)
if(HAVE_CAP_RIGHTS_LIMIT)
set(SANDBOX_COMPILE_DEFINITION "HAVE_CAP_RIGHTS_LIMIT")
set(SANDBOX_FOUND ON)
endif()
endif()
# Sandboxing: pledge(2)
if(NOT SANDBOX_FOUND AND ENABLE_SANDBOX MATCHES "^ON$|^pledge$")
check_symbol_exists(pledge unistd.h HAVE_PLEDGE)
if(HAVE_PLEDGE)
set(SANDBOX_COMPILE_DEFINITION "HAVE_PLEDGE")
set(SANDBOX_FOUND ON)
endif()
endif()
# Sandboxing: Landlock
if(NOT SANDBOX_FOUND AND ENABLE_SANDBOX MATCHES "^ON$|^landlock$")
check_include_file(linux/landlock.h HAVE_LINUX_LANDLOCK_H)
if(HAVE_LINUX_LANDLOCK_H)
set(SANDBOX_COMPILE_DEFINITION "HAVE_LINUX_LANDLOCK_H")
set(SANDBOX_FOUND ON)
# Of our three sandbox methods, only Landlock is incompatible
# with -fsanitize. FreeBSD 13.2 with Capsicum was tested with
# -fsanitize=address,undefined and had no issues. OpenBSD (as
# of version 7.4) has minimal support for process instrumentation.
# OpenBSD does not distribute the additional libraries needed
# (libasan, libubsan, etc.) with GCC or Clang needed for runtime
# sanitization support and instead only support
# -fsanitize-minimal-runtime for minimal undefined behavior
# sanitization. This minimal support is compatible with our use
# of the Pledge sandbox. So only Landlock will result in a
# build that cannot compress or decompress a single file to
# standard out.
if(CMAKE_C_FLAGS MATCHES "-fsanitize=")
message(SEND_ERROR
"CMAKE_C_FLAGS or the environment variable CFLAGS "
"contains '-fsanitize=' which is incompatible "
"with Landlock sandboxing. Use -DENABLE_SANDBOX=OFF "
"as an argument to 'cmake' when using '-fsanitize'.")
endif()
endif()
endif()
if(NOT SANDBOX_FOUND AND NOT ENABLE_SANDBOX MATCHES "^ON$|^OFF$")
message(SEND_ERROR "ENABLE_SANDBOX=${ENABLE_SANDBOX} was used but "
"support for the sandboxing method wasn't found.")
endif()
CMake: Allow configuring features as cache variables. This allows users to change the features they build either in CMakeCache.txt or by using a CMake GUI. The sources built for liblzma are affected by this too, so only the necessary files will be compiled.
2023-02-25 04:46:50 +01:00
###
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# Put the tuklib functions under the lzma_ namespace.
target_compile_definitions(liblzma PRIVATE TUKLIB_SYMBOL_PREFIX=lzma_)
tuklib_cpucores(liblzma)
tuklib_physmem(liblzma)
Build: Make CMake build fail if tuklib_cpucores or tuklib_physmem fails.
2020-02-27 19:58:52 +01:00
# While liblzma can be built without tuklib_cpucores or tuklib_physmem
# modules, the liblzma API functions lzma_cputhreads() and lzma_physmem()
# will then be useless (which isn't too bad but still unfortunate). Since
# I expect the CMake-based builds to be only used on systems that are
# supported by these tuklib modules, problems with these tuklib modules
# are considered a hard error for now. This hopefully helps to catch bugs
# in the CMake versions of the tuklib checks.
if(NOT TUKLIB_CPUCORES_FOUND OR NOT TUKLIB_PHYSMEM_FOUND)
# Use SEND_ERROR instead of FATAL_ERROR. If someone reports a bug,
# seeing the results of the remaining checks can be useful too.
message(SEND_ERROR
"tuklib_cpucores() or tuklib_physmem() failed. "
"Unless you really are building for a system where these "
"modules are not supported (unlikely), this is a bug in the "
"included cmake/tuklib_*.cmake files that should be fixed. "
"To build anyway, edit this CMakeLists.txt to ignore this error.")
endif()
liblzma: Use __attribute__((__constructor__)) if available. This uses it for CRC table initializations when using --disable-small. It avoids mythread_once() overhead. It also means that then --disable-small --disable-threads is thread-safe if this attribute is supported.
2022-11-14 15:00:52 +01:00
# Check for __attribute__((__constructor__)) support.
# This needs -Werror because some compilers just warn
# about this being unsupported.
cmake_push_check_state()
set(CMAKE_REQUIRED_FLAGS "-Werror")
check_c_source_compiles("
__attribute__((__constructor__))
static void my_constructor_func(void) { return; }
int main(void) { return 0; }
"
HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR)
cmake_pop_check_state()
tuklib_add_definition_if(liblzma HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR)
CMake: Conditionally allow win95 threads and --enable-small.
2023-08-09 14:54:15 +02:00
# The Win95 threading lacks a thread-safe one-time initialization function.
# The one-time initialization is needed for crc32_small.c and crc64_small.c
# create the CRC tables. So if small mode is enabled, the threading mode is
# win95, and the compiler does not support attribute constructor, then we
# would end up with a multithreaded build that is thread-unsafe. As a
# result this configuration is not allowed.
if(USE_WIN95_THREADS AND ENABLE_SMALL AND NOT HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR)
message(SEND_ERROR "Threading method win95 and ENABLE_SMALL "
"cannot be used at the same time with a compiler "
"that doesn't support "
"__attribute__((__constructor__))")
endif()
Add ifunc check to CMakeLists.txt CMake build system will now verify if __attribute__((__ifunc__())) can be used in the build system. If so, HAVE_FUNC_ATTRIBUTE_IFUNC will be defined to 1.
2023-06-22 19:49:30 +02:00
# Check for __attribute__((__ifunc__())) support.
CMake: Change __attribute__((__ifunc__())) detection. This renames ALLOW_ATTR_IFUNC to USE_ATTR_IFUNC and applies the ifunc detection changes that were made to the Autotools build. Fixes: https://github.com/tukaani-project/xz/issues/70
2023-11-22 13:33:36 +01:00
# Supported values for USE_ATTR_IFUNC:
#
# auto (default) - Detect ifunc support with a compile test.
# ON - Always enable ifunc.
# OFF - Disable ifunc usage.
set(USE_ATTR_IFUNC "auto" CACHE STRING "Use __attribute__((__ifunc__())).")
set(SUPPORTED_USE_ATTR_IFUNC auto ON OFF)
if(NOT USE_ATTR_IFUNC IN_LIST SUPPORTED_USE_ATTR_IFUNC)
message(FATAL_ERROR "'${USE_ATTR_IFUNC}' is not a supported value for"
"USE_ATTR_IFUNC")
endif()
Add ifunc check to CMakeLists.txt CMake build system will now verify if __attribute__((__ifunc__())) can be used in the build system. If so, HAVE_FUNC_ATTRIBUTE_IFUNC will be defined to 1.
2023-06-22 19:49:30 +02:00
CMake: Change __attribute__((__ifunc__())) detection. This renames ALLOW_ATTR_IFUNC to USE_ATTR_IFUNC and applies the ifunc detection changes that were made to the Autotools build. Fixes: https://github.com/tukaani-project/xz/issues/70
2023-11-22 13:33:36 +01:00
# When USE_ATTR_IFUNC is 'auto', allow the use of __attribute__((__ifunc__()))
# if compiler support is detected and we are building for GNU/Linux (glibc)
# or FreeBSD. uClibc and musl don't support ifunc in their dynamic linkers
# but some compilers still accept the attribute when compiling for these
# C libraries, which results in broken binaries. That's why we need to
# check which libc is being used.
if(USE_ATTR_IFUNC STREQUAL "auto")
Add ifunc check to CMakeLists.txt CMake build system will now verify if __attribute__((__ifunc__())) can be used in the build system. If so, HAVE_FUNC_ATTRIBUTE_IFUNC will be defined to 1.
2023-06-22 19:49:30 +02:00
cmake_push_check_state()
set(CMAKE_REQUIRED_FLAGS "-Werror")
CMake: Change __attribute__((__ifunc__())) detection. This renames ALLOW_ATTR_IFUNC to USE_ATTR_IFUNC and applies the ifunc detection changes that were made to the Autotools build. Fixes: https://github.com/tukaani-project/xz/issues/70
2023-11-22 13:33:36 +01:00
Add ifunc check to CMakeLists.txt CMake build system will now verify if __attribute__((__ifunc__())) can be used in the build system. If so, HAVE_FUNC_ATTRIBUTE_IFUNC will be defined to 1.
2023-06-22 19:49:30 +02:00
check_c_source_compiles("
CMake: Change __attribute__((__ifunc__())) detection. This renames ALLOW_ATTR_IFUNC to USE_ATTR_IFUNC and applies the ifunc detection changes that were made to the Autotools build. Fixes: https://github.com/tukaani-project/xz/issues/70
2023-11-22 13:33:36 +01:00
/*
* Force a compilation error when not using glibc on Linux
* or if we are not using FreeBSD. uClibc will define
* __GLIBC__ but does not support ifunc, so we must have
* an extra check to disable with uClibc.
*/
#if defined(__linux__)
# include <features.h>
# if !defined(__GLIBC__) || defined(__UCLIBC__)
compile error
# endif
#elif !defined(__FreeBSD__)
compile error
#endif
Add ifunc check to CMakeLists.txt CMake build system will now verify if __attribute__((__ifunc__())) can be used in the build system. If so, HAVE_FUNC_ATTRIBUTE_IFUNC will be defined to 1.
2023-06-22 19:49:30 +02:00
static void func(void) { return; }
Minor tweaks to style and comments.
2023-06-27 16:24:49 +02:00
static void (*resolve_func(void)) (void) { return func; }
void func_ifunc(void)
__attribute__((__ifunc__(\"resolve_func\")));
Add ifunc check to CMakeLists.txt CMake build system will now verify if __attribute__((__ifunc__())) can be used in the build system. If so, HAVE_FUNC_ATTRIBUTE_IFUNC will be defined to 1.
2023-06-22 19:49:30 +02:00
int main(void) { return 0; }
Build: Fix __attribute__((ifunc(...))) detection with clang -Wall. Now if user-supplied CFLAGS contains -Wall -Wextra -Wpedantic the two checks that need -Werror will still work. At CMake side there is add_compile_options(-Wall -Wextra) but it didn't affect the -Werror tests. So with both Autotools and CMake only user-supplied CFLAGS could make the checks fail when they shouldn't. This is not a full fix as things like -Wunused-macros in user-supplied CFLAGS will still cause problems with both GCC and Clang.
2023-09-26 14:00:43 +02:00
/*
* 'clang -Wall' incorrectly warns that resolve_func is
* unused (-Wunused-function). Correct assembly output is
* still produced. This problem exists at least in Clang
* versions 4 to 17. The following silences the bogus warning:
*/
void make_clang_quiet(void);
void make_clang_quiet(void) { resolve_func()(); }
Add ifunc check to CMakeLists.txt CMake build system will now verify if __attribute__((__ifunc__())) can be used in the build system. If so, HAVE_FUNC_ATTRIBUTE_IFUNC will be defined to 1.
2023-06-22 19:49:30 +02:00
"
CMake: Change __attribute__((__ifunc__())) detection. This renames ALLOW_ATTR_IFUNC to USE_ATTR_IFUNC and applies the ifunc detection changes that were made to the Autotools build. Fixes: https://github.com/tukaani-project/xz/issues/70
2023-11-22 13:33:36 +01:00
SYSTEM_SUPPORTS_IFUNC)
cmake_pop_check_state()
endif()
if(USE_ATTR_IFUNC STREQUAL "ON" OR SYSTEM_SUPPORTS_IFUNC)
tuklib_add_definitions(liblzma HAVE_FUNC_ATTRIBUTE_IFUNC)
Build: Detect -fsanitize= in CFLAGS and incompatible build options. Now configure will fail if -fsanitize= is found in CFLAGS and sanitizer-incompatible ifunc or Landlock sandboxing would be used. These are incompatible with one or more sanitizers. It's simpler to reject all -fsanitize= uses instead of trying to pass those that might not cause problems. CMake-based build was updated similarly. It lets the configuration finish (SEND_ERROR instead of FATAL_ERROR) so that both error messages can be seen at once.
2023-10-25 18:13:25 +02:00
CMake: Change __attribute__((__ifunc__())) detection. This renames ALLOW_ATTR_IFUNC to USE_ATTR_IFUNC and applies the ifunc detection changes that were made to the Autotools build. Fixes: https://github.com/tukaani-project/xz/issues/70
2023-11-22 13:33:36 +01:00
if(CMAKE_C_FLAGS MATCHES "-fsanitize=")
Build: Detect -fsanitize= in CFLAGS and incompatible build options. Now configure will fail if -fsanitize= is found in CFLAGS and sanitizer-incompatible ifunc or Landlock sandboxing would be used. These are incompatible with one or more sanitizers. It's simpler to reject all -fsanitize= uses instead of trying to pass those that might not cause problems. CMake-based build was updated similarly. It lets the configuration finish (SEND_ERROR instead of FATAL_ERROR) so that both error messages can be seen at once.
2023-10-25 18:13:25 +02:00
message(SEND_ERROR
"CMAKE_C_FLAGS or the environment variable CFLAGS "
"contains '-fsanitize=' which is incompatible "
CMake: Change __attribute__((__ifunc__())) detection. This renames ALLOW_ATTR_IFUNC to USE_ATTR_IFUNC and applies the ifunc detection changes that were made to the Autotools build. Fixes: https://github.com/tukaani-project/xz/issues/70
2023-11-22 13:33:36 +01:00
"with ifunc. Use -DUSE_ATTR_IFUNC=OFF "
Build: Detect -fsanitize= in CFLAGS and incompatible build options. Now configure will fail if -fsanitize= is found in CFLAGS and sanitizer-incompatible ifunc or Landlock sandboxing would be used. These are incompatible with one or more sanitizers. It's simpler to reject all -fsanitize= uses instead of trying to pass those that might not cause problems. CMake-based build was updated similarly. It lets the configuration finish (SEND_ERROR instead of FATAL_ERROR) so that both error messages can be seen at once.
2023-10-25 18:13:25 +02:00
"as an argument to 'cmake' when using '-fsanitize'.")
endif()
Add ifunc check to CMakeLists.txt CMake build system will now verify if __attribute__((__ifunc__())) can be used in the build system. If so, HAVE_FUNC_ATTRIBUTE_IFUNC will be defined to 1.
2023-06-22 19:49:30 +02:00
endif()
liblzma: Add fast CRC64 for 32/64-bit x86 using SSSE3 + SSE4.1 + CLMUL. It also works on E2K as it supports these intrinsics. On x86-64 runtime detection is used so the code keeps working on older processors too. A CLMUL-only build can be done by using -msse4.1 -mpclmul in CFLAGS and this will reduce the library size since the generic implementation and its 8 KiB lookup table will be omitted. On 32-bit x86 this isn't used by default for now because by default on 32-bit x86 the separate assembly file crc64_x86.S is used. If --disable-assembler is used then this new CLMUL code is used the same way as on 64-bit x86. However, a CLMUL-only build (-msse4.1 -mpclmul) won't omit the 8 KiB lookup table on 32-bit x86 due to a currently-missing check for disabled assembler usage. The configure.ac check should be such that the code won't be built if something in the toolchain doesn't support it but --disable-clmul-crc option can be used to unconditionally disable this feature. CLMUL speeds up decompression of files that have compressed very well (assuming CRC64 is used as a check type). It is know that the CLMUL code is significantly slower than the generic code for tiny inputs (especially 1-8 bytes but up to 16 bytes). If that is a real-world problem then there is already a commented-out variant that uses the generic version for small inputs. Thanks to Ilya Kurdyukov for the original patch which was derived from a white paper from Intel [1] (published in 2009) and public domain code from [2] (released in 2016). [1] https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf [2] https://github.com/rawrunprotected/crc
2022-11-14 20:34:57 +01:00
# cpuid.h
check_include_file(cpuid.h HAVE_CPUID_H)
tuklib_add_definition_if(liblzma HAVE_CPUID_H)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# immintrin.h:
check_include_file(immintrin.h HAVE_IMMINTRIN_H)
if(HAVE_IMMINTRIN_H)
target_compile_definitions(liblzma PRIVATE HAVE_IMMINTRIN_H)
# SSE2 intrinsics:
check_c_source_compiles("
#include <immintrin.h>
int main(void)
{
__m128i x = { 0 };
_mm_movemask_epi8(x);
return 0;
}
"
HAVE__MM_MOVEMASK_EPI8)
tuklib_add_definition_if(liblzma HAVE__MM_MOVEMASK_EPI8)
liblzma: Add fast CRC64 for 32/64-bit x86 using SSSE3 + SSE4.1 + CLMUL. It also works on E2K as it supports these intrinsics. On x86-64 runtime detection is used so the code keeps working on older processors too. A CLMUL-only build can be done by using -msse4.1 -mpclmul in CFLAGS and this will reduce the library size since the generic implementation and its 8 KiB lookup table will be omitted. On 32-bit x86 this isn't used by default for now because by default on 32-bit x86 the separate assembly file crc64_x86.S is used. If --disable-assembler is used then this new CLMUL code is used the same way as on 64-bit x86. However, a CLMUL-only build (-msse4.1 -mpclmul) won't omit the 8 KiB lookup table on 32-bit x86 due to a currently-missing check for disabled assembler usage. The configure.ac check should be such that the code won't be built if something in the toolchain doesn't support it but --disable-clmul-crc option can be used to unconditionally disable this feature. CLMUL speeds up decompression of files that have compressed very well (assuming CRC64 is used as a check type). It is know that the CLMUL code is significantly slower than the generic code for tiny inputs (especially 1-8 bytes but up to 16 bytes). If that is a real-world problem then there is already a commented-out variant that uses the generic version for small inputs. Thanks to Ilya Kurdyukov for the original patch which was derived from a white paper from Intel [1] (published in 2009) and public domain code from [2] (released in 2016). [1] https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf [2] https://github.com/rawrunprotected/crc
2022-11-14 20:34:57 +01:00
# CLMUL intrinsic:
CMake: Add ALLOW_CLMUL_CRC option to enable/disable CLMUL. The option is enabled by default, but will only be visible to a user listing cache variables or using a CMake GUI application if the immintrin.h header file is found. This mirrors our Autotools build --disable-clmul-crc functionality.
2023-10-19 10:09:01 +02:00
option(ALLOW_CLMUL_CRC "Allow carryless multiplication for CRC \
calculation if supported by the system" ON)
if(ALLOW_CLMUL_CRC)
check_c_source_compiles("
#include <immintrin.h>
#if defined(__e2k__) && __iset__ < 6
# error
#endif
#if (defined(__GNUC__) || defined(__clang__)) \
&& !defined(__EDG__)
__attribute__((__target__(\"ssse3,sse4.1,pclmul\")))
#endif
__m128i my_clmul(__m128i a)
{
const __m128i b = _mm_set_epi64x(1, 2);
return _mm_clmulepi64_si128(a, b, 0);
}
int main(void) { return 0; }
CMake: Use consistent indentation with check_c_source_compiles().
2023-11-24 14:19:12 +01:00
"
HAVE_USABLE_CLMUL)
liblzma: Avoid extern lzma_crc32_clmul() and lzma_crc64_clmul(). A CLMUL-only build will have the crcxx_clmul() inlined into lzma_crcxx(). Previously a jump to the extern lzma_crcxx_clmul() was needed. Notes about shared liblzma on ELF platforms: - On platforms that support ifunc and -fvisibility=hidden, this was silly because CLMUL-only build would have that single extra jump instruction of extra overhead. - On platforms that support neither -fvisibility=hidden nor linker version script (liblzma*.map), jumping to lzma_crcxx_clmul() would go via PLT so a few more instructions of overhead (still not a big issue but silly nevertheless). There was a downside with static liblzma too: if an application only needs lzma_crc64(), static linking would make the linker include the CLMUL code for both CRC32 and CRC64 from crc_x86_clmul.o even though the CRC32 code wouldn't be needed, thus increasing code size of the executable (assuming that -ffunction-sections isn't used). Also, now compilers are likely to inline crc_simd_body() even if they don't support the always_inline attribute (or MSVC's __forceinline). Quite possibly all compilers that build the code do support such an attribute. But now it likely isn't a problem even if the attribute wasn't supported. Now all x86-specific stuff is in crc_x86_clmul.h. If other archs The other archs can then have their own headers with their own is_clmul_supported() and crcxx_clmul(). Another bonus is that the build system doesn't need to care if crc_clmul.c is needed. is_clmul_supported() stays as inline function as it's not needed when doing a CLMUL-only build (avoids a warning about unused function).
2023-10-20 22:35:10 +02:00
tuklib_add_definition_if(liblzma HAVE_USABLE_CLMUL)
liblzma: Create crc_clmul.c. Both crc32_clmul() and crc64_clmul() are now exported from crc32_clmul.c as lzma_crc32_clmul() and lzma_crc64_clmul(). This ensures that is_clmul_supported() (now lzma_is_clmul_supported()) is not duplicated between crc32_fast.c and crc64_fast.c. Also, it encapsulates the complexity of the CLMUL implementations into a single file and reduces the complexity of crc32_fast.c and crc64_fast.c. Before, CLMUL code was present in crc32_fast.c, crc64_fast.c, and crc_common.h. During the conversion, various cleanups were applied to code (thanks to Lasse Collin) including: - Require using semicolons with MASK_/L/H/LH macros. - Variable typing and const handling improvements. - Improvements to comments. - Fixes to the pragmas used. - Removed unneeded variables. - Whitespace improvements. - Fixed CRC_USE_GENERIC_FOR_SMALL_INPUTS handling. - Silenced warnings and removed the need for some #pragmas
2023-10-14 06:17:57 +02:00
endif()
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
endif()
CMake: Add support for ARM64 CRC32 instruction detection.
2024-01-21 17:42:28 +01:00
# ARM64 C Language Extensions define CRC32 functions in arm_acle.h.
# These are supported by at least GCC and Clang which both need
# __attribute__((__target__("+crc"))), unless the needed compiler flags
# are used to support the CRC instruction.
option(ALLOW_ARM64_CRC32 "Allow ARM64 CRC32 instruction if supported by \
the system" ON)
if(ALLOW_ARM64_CRC32)
check_c_source_compiles("
#include <stdint.h>
#ifndef _MSC_VER
#include <arm_acle.h>
#endif
#if (defined(__GNUC__) || defined(__clang__)) && !defined(__EDG__)
__attribute__((__target__(\"+crc\")))
#endif
uint32_t my_crc(uint32_t a, uint64_t b)
{
return __crc32d(a, b);
}
int main(void) { return 0; }
"
HAVE_ARM64_CRC32)
if(HAVE_ARM64_CRC32)
target_compile_definitions(liblzma PRIVATE HAVE_ARM64_CRC32)
# Check for ARM64 CRC32 instruction runtime detection.
# getauxval() is supported on Linux.
check_symbol_exists(getauxval sys/auxv.h HAVE_GETAUXVAL)
tuklib_add_definition_if(liblzma HAVE_GETAUXVAL)
# elf_aux_info() is supported on FreeBSD.
check_symbol_exists(elf_aux_info sys/auxv.h HAVE_ELF_AUX_INFO)
tuklib_add_definition_if(liblzma HAVE_ELF_AUX_INFO)
# sysctlbyname("hw.optional.armv8_crc32", ...) is supported on Darwin
# (macOS, iOS, etc.). Note that sysctlbyname() is supported on FreeBSD,
# NetBSD, and possibly others too but the string is specific to
# Apple OSes. The C code is responsible for checking
# defined(__APPLE__) before using
# sysctlbyname("hw.optional.armv8_crc32", ...).
check_symbol_exists(sysctlbyname sys/sysctl.h HAVE_SYSCTLBYNAME)
tuklib_add_definition_if(liblzma HAVE_SYSCTLBYNAME)
endif()
endif()
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# Support -fvisiblity=hidden when building shared liblzma.
# These lines do nothing on Windows (even under Cygwin).
# HAVE_VISIBILITY should always be defined to 0 or 1.
if(BUILD_SHARED_LIBS)
set_target_properties(liblzma PROPERTIES C_VISIBILITY_PRESET hidden)
target_compile_definitions(liblzma PRIVATE HAVE_VISIBILITY=1)
else()
target_compile_definitions(liblzma PRIVATE HAVE_VISIBILITY=0)
endif()
if(WIN32)
if(BUILD_SHARED_LIBS)
# Add the Windows resource file for liblzma.dll.
target_sources(liblzma PRIVATE src/liblzma/liblzma_w32res.rc)
CMake: Update for liblzma_*.map files and fix wrong common_w32res.rc dep. The previous commit split liblzma.map into liblzma_linux.map and liblzma_generic.map. This commit updates the CMake build for those. common_w32res.rc dependency was listed under Linux/FreeBSD while obviously it belongs to Windows when building a DLL.
2022-09-08 14:02:41 +02:00
set_target_properties(liblzma PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# Export the public API symbols with __declspec(dllexport).
target_compile_definitions(liblzma PRIVATE DLL_EXPORT)
CMake: Create liblzma.def when building liblzma.dll with MinGW-w64.
2023-09-27 21:46:20 +02:00
if(NOT MSVC)
# Create a DEF file. The linker puts the ordinal numbers there
# too so the output from the linker isn't our final file.
target_link_options(liblzma PRIVATE
"-Wl,--output-def,liblzma.def.in")
# Remove the ordinal numbers from the DEF file so that
# no one will create an import library that links by ordinal
# instead of by name. We don't maintain a DEF file so the
# ordinal numbers aren't stable.
add_custom_command(TARGET liblzma POST_BUILD
COMMAND "${CMAKE_COMMAND}"
-DINPUT_FILE=liblzma.def.in
-DOUTPUT_FILE=liblzma.def
-P
"${CMAKE_CURRENT_SOURCE_DIR}/cmake/remove-ordinals.cmake"
BYPRODUCTS "liblzma.def"
VERBATIM)
endif()
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
else()
# Disable __declspec(dllimport) when linking against static liblzma.
target_compile_definitions(liblzma INTERFACE LZMA_API_STATIC)
endif()
CMake: Don't use symbol versioning with static library.
2022-11-23 23:02:31 +01:00
elseif(BUILD_SHARED_LIBS AND CMAKE_SYSTEM_NAME STREQUAL "Linux")
CMake: Update for liblzma_*.map files and fix wrong common_w32res.rc dep. The previous commit split liblzma.map into liblzma_linux.map and liblzma_generic.map. This commit updates the CMake build for those. common_w32res.rc dependency was listed under Linux/FreeBSD while obviously it belongs to Windows when building a DLL.
2022-09-08 14:02:41 +02:00
# GNU/Linux-specific symbol versioning for shared liblzma.
CMake: Don't use symbol versioning with static library.
2022-11-23 23:02:31 +01:00
# Note that adding link options doesn't affect static builds
# but HAVE_SYMBOL_VERSIONS_LINUX must not be used with static builds
# because it would put symbol versions into the static library which
# can cause problems. It's clearer if all symver related things are
# omitted when not building a shared library.
Build: Don't put GNU/Linux-specific symbol versions into static liblzma. It not only makes no sense to put symbol versions into a static library but it can also cause breakage. By default Libtool #defines PIC if building a shared library and doesn't define it for static libraries. This is documented in the Libtool manual. It can be overriden using --with-pic or --without-pic. configure.ac detects if --with-pic or --without-pic is used and then gives an error if neither --disable-shared nor --disable-static was used at the same time. Thus, in normal situations it works to build both shared and static library at the same time on GNU/Linux, only --with-pic or --without-pic requires that only one type of library is built. Thanks to John Paul Adrian Glaubitz from Debian for reporting the problem that occurred on ia64: https://www.mail-archive.com/xz-devel@tukaani.org/msg00610.html
2022-11-24 13:52:44 +01:00
#
# NOTE: Set it explicitly to 1 to make it clear that versioning is
# done unconditionally in the C files.
target_compile_definitions(liblzma PRIVATE HAVE_SYMBOL_VERSIONS_LINUX=1)
CMake: Update for liblzma_*.map files and fix wrong common_w32res.rc dep. The previous commit split liblzma.map into liblzma_linux.map and liblzma_generic.map. This commit updates the CMake build for those. common_w32res.rc dependency was listed under Linux/FreeBSD while obviously it belongs to Windows when building a DLL.
2022-09-08 14:02:41 +02:00
target_link_options(liblzma PRIVATE
"-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_linux.map"
)
set_target_properties(liblzma PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_linux.map"
)
CMake: Don't use symbol versioning with static library.
2022-11-23 23:02:31 +01:00
elseif(BUILD_SHARED_LIBS AND CMAKE_SYSTEM_NAME STREQUAL "FreeBSD")
CMake: Update for liblzma_*.map files and fix wrong common_w32res.rc dep. The previous commit split liblzma.map into liblzma_linux.map and liblzma_generic.map. This commit updates the CMake build for those. common_w32res.rc dependency was listed under Linux/FreeBSD while obviously it belongs to Windows when building a DLL.
2022-09-08 14:02:41 +02:00
# Symbol versioning for shared liblzma for non-GNU/Linux.
# FIXME? What about Solaris?
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
target_link_options(liblzma PRIVATE
CMake: Update for liblzma_*.map files and fix wrong common_w32res.rc dep. The previous commit split liblzma.map into liblzma_linux.map and liblzma_generic.map. This commit updates the CMake build for those. common_w32res.rc dependency was listed under Linux/FreeBSD while obviously it belongs to Windows when building a DLL.
2022-09-08 14:02:41 +02:00
"-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_generic.map"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
)
set_target_properties(liblzma PROPERTIES
CMake: Update for liblzma_*.map files and fix wrong common_w32res.rc dep. The previous commit split liblzma.map into liblzma_linux.map and liblzma_generic.map. This commit updates the CMake build for those. common_w32res.rc dependency was listed under Linux/FreeBSD while obviously it belongs to Windows when building a DLL.
2022-09-08 14:02:41 +02:00
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_generic.map"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
)
endif()
set_target_properties(liblzma PROPERTIES
# At least for now the package versioning matches the rules used for
# shared library versioning (excluding development releases) so it is
# fine to use the package version here.
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
SOVERSION "${xz_VERSION_MAJOR}"
VERSION "${xz_VERSION}"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# It's liblzma.so or liblzma.dll, not libliblzma.so or lzma.dll.
# Avoid the name lzma.dll because it would conflict with LZMA SDK.
PREFIX ""
CMake/Windows: Fix the import library filename. Both PREFIX and IMPORT_PERFIX have to be set to "" to get liblzma.dll and liblzma.dll.a.
2023-10-01 18:10:57 +02:00
IMPORT_PREFIX ""
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
)
CMake: Update liblzma-config.cmake generation. Now that the threading is configurable, the liblzma CMake package only needs the threading library when using POSIX threads.
2023-03-28 16:32:40 +02:00
# Create liblzma-config-version.cmake.
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
#
# FIXME: SameMajorVersion is correct for stable releases but it is wrong
# for development releases where each release may have incompatible changes.
include(CMakePackageConfigHelpers)
write_basic_package_version_file(
CMake: Try to improve compatibility with the FindLibLZMA module. The naming conflict with FindLibLZMA module gets worse. Not avoiding it in the first place was stupid. Normally find_package(LibLZMA) will use the module and find_package(liblzma 5.2.5 REQUIRED CONFIG) will use the config file even with a case insensitive file system. However, if CMAKE_FIND_PACKAGE_PREFER_CONFIG is TRUE and the file system is case insensitive, find_package(LibLZMA) will find our liblzma config file instead of using FindLibLZMA module. One big problem with this is that FindLibLZMA uses LibLZMA::LibLZMA and we use liblzma::liblzma as the target name. With target names CMake happens to be case sensitive. To workaround this, this commit adds add_library(LibLZMA::LibLZMA ALIAS liblzma::liblzma) to the config file. Then both spellings work. To make the behavior consistent between case sensitive and insensitive file systems, the config and related files are renamed from liblzmaConfig.cmake to liblzma-config.cmake style. With this style CMake looks for lowercase version of the package name so find_package(LiBLzmA 5.2.5 REQUIRED CONFIG) will work to find our config file. There are other differences between our config file and FindLibLZMA so it's still possible that things break for reasons other than the spelling of the target name. Hopefully those situations aren't too common. When the config file is available, it should always give as good or better results as FindLibLZMA so this commit doesn't affect the recommendation to use find_package(liblzma 5.2.5 REQUIRED CONFIG) which explicitly avoids FindLibLZMA. Thanks to Markus Rickert.
2021-01-30 17:36:04 +01:00
"${CMAKE_CURRENT_BINARY_DIR}/liblzma-config-version.cmake"
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
VERSION "${liblzma_VERSION}"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
COMPATIBILITY SameMajorVersion)
CMake: Update liblzma-config.cmake generation. Now that the threading is configurable, the liblzma CMake package only needs the threading library when using POSIX threads.
2023-03-28 16:32:40 +02:00
# Create liblzma-config.cmake. We use this spelling instead of
# liblzmaConfig.cmake to make find_package work in case insensitive
# manner even with case sensitive file systems. This gives more consistent
# behavior between operating systems. This optionally includes a dependency
# on a threading library, so the contents are created in two separate parts.
# The "second half" is always needed, so create it first.
set(LZMA_CONFIG_CONTENTS
"include(\"\${CMAKE_CURRENT_LIST_DIR}/liblzma-targets.cmake\")
CMake: Use interface library for better FindLibLZMA compatibility. https://www.mail-archive.com/xz-devel@tukaani.org/msg00446.html Thanks to Markus Rickert.
2021-02-13 22:31:27 +01:00
CMake: Protects against double find_package Boost iostream uses `find_package` in quiet mode and then again uses `find_package` with required. This second call triggers a `add_library cannot create imported target "ZLIB::ZLIB" because another target with the same name already exists.` This can simply be fixed by skipping the alias part on secondary `find_package` runs.
2023-06-06 15:32:45 +02:00
if(NOT TARGET LibLZMA::LibLZMA)
# Be compatible with the spelling used by the FindLibLZMA module. This
# doesn't use ALIAS because it would make CMake resolve LibLZMA::LibLZMA
# to liblzma::liblzma instead of keeping the original spelling. Keeping
# the original spelling is important for good FindLibLZMA compatibility.
add_library(LibLZMA::LibLZMA INTERFACE IMPORTED)
set_target_properties(LibLZMA::LibLZMA PROPERTIES
INTERFACE_LINK_LIBRARIES liblzma::liblzma)
endif()
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
")
CMake: Don't shadow the cache entry ENABLE_THREADS with a normal variable. Using set(ENABLE_THREADS "posix") is confusing because it sets a new normal variable and leaves the cache entry with the same name unchanged. The intent wasn't to change the cache entry so this switches to a different variable name.
2023-10-11 18:47:44 +02:00
if(USE_POSIX_THREADS)
CMake: Update liblzma-config.cmake generation. Now that the threading is configurable, the liblzma CMake package only needs the threading library when using POSIX threads.
2023-03-28 16:32:40 +02:00
set(LZMA_CONFIG_CONTENTS
"include(CMakeFindDependencyMacro)
set(THREADS_PREFER_PTHREAD_FLAG TRUE)
find_dependency(Threads)
${LZMA_CONFIG_CONTENTS}
")
endif()
file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config.cmake"
"${LZMA_CONFIG_CONTENTS}")
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# Set CMAKE_INSTALL_LIBDIR and friends.
include(GNUInstallDirs)
CMake: Generate and install liblzma.pc if not using MSVC. Autotools based build uses -pthread and thus adds it to Libs.private in liblzma.pc. CMake doesn't use -pthread at all if pthread functions are available in libc so Libs.private doesn't get -pthread either.
2023-09-30 01:14:25 +02:00
# Create liblzma.pc.
set(prefix "${CMAKE_INSTALL_PREFIX}")
set(exec_prefix "${CMAKE_INSTALL_PREFIX}")
set(libdir "${CMAKE_INSTALL_FULL_LIBDIR}")
set(includedir "${CMAKE_INSTALL_FULL_INCLUDEDIR}")
set(PTHREAD_CFLAGS "${CMAKE_THREAD_LIBS_INIT}")
configure_file(src/liblzma/liblzma.pc.in liblzma.pc
@ONLY
NEWLINE_STYLE LF)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# Install the library binary. The INCLUDES specifies the include path that
# is exported for other projects to use but it doesn't install any files.
install(TARGETS liblzma EXPORT liblzmaTargets
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
COMPONENT liblzma_Runtime
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
LIBRARY DESTINATION "${CMAKE_INSTALL_LIBDIR}"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
COMPONENT liblzma_Runtime
NAMELINK_COMPONENT liblzma_Development
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
ARCHIVE DESTINATION "${CMAKE_INSTALL_LIBDIR}"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
COMPONENT liblzma_Development
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
INCLUDES DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}")
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
# Install the liblzma API headers. These use a subdirectory so
# this has to be done as a separate step.
install(DIRECTORY src/liblzma/api/
COMPONENT liblzma_Development
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
FILES_MATCHING PATTERN "*.h")
# Install the CMake files that other packages can use to find liblzma.
set(liblzma_INSTALL_CMAKEDIR
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
"${CMAKE_INSTALL_LIBDIR}/cmake/liblzma"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
CACHE STRING "Path to liblzma's .cmake files")
install(EXPORT liblzmaTargets
NAMESPACE liblzma::
CMake: Try to improve compatibility with the FindLibLZMA module. The naming conflict with FindLibLZMA module gets worse. Not avoiding it in the first place was stupid. Normally find_package(LibLZMA) will use the module and find_package(liblzma 5.2.5 REQUIRED CONFIG) will use the config file even with a case insensitive file system. However, if CMAKE_FIND_PACKAGE_PREFER_CONFIG is TRUE and the file system is case insensitive, find_package(LibLZMA) will find our liblzma config file instead of using FindLibLZMA module. One big problem with this is that FindLibLZMA uses LibLZMA::LibLZMA and we use liblzma::liblzma as the target name. With target names CMake happens to be case sensitive. To workaround this, this commit adds add_library(LibLZMA::LibLZMA ALIAS liblzma::liblzma) to the config file. Then both spellings work. To make the behavior consistent between case sensitive and insensitive file systems, the config and related files are renamed from liblzmaConfig.cmake to liblzma-config.cmake style. With this style CMake looks for lowercase version of the package name so find_package(LiBLzmA 5.2.5 REQUIRED CONFIG) will work to find our config file. There are other differences between our config file and FindLibLZMA so it's still possible that things break for reasons other than the spelling of the target name. Hopefully those situations aren't too common. When the config file is available, it should always give as good or better results as FindLibLZMA so this commit doesn't affect the recommendation to use find_package(liblzma 5.2.5 REQUIRED CONFIG) which explicitly avoids FindLibLZMA. Thanks to Markus Rickert.
2021-01-30 17:36:04 +01:00
FILE liblzma-targets.cmake
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
DESTINATION "${liblzma_INSTALL_CMAKEDIR}"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
COMPONENT liblzma_Development)
CMake: Try to improve compatibility with the FindLibLZMA module. The naming conflict with FindLibLZMA module gets worse. Not avoiding it in the first place was stupid. Normally find_package(LibLZMA) will use the module and find_package(liblzma 5.2.5 REQUIRED CONFIG) will use the config file even with a case insensitive file system. However, if CMAKE_FIND_PACKAGE_PREFER_CONFIG is TRUE and the file system is case insensitive, find_package(LibLZMA) will find our liblzma config file instead of using FindLibLZMA module. One big problem with this is that FindLibLZMA uses LibLZMA::LibLZMA and we use liblzma::liblzma as the target name. With target names CMake happens to be case sensitive. To workaround this, this commit adds add_library(LibLZMA::LibLZMA ALIAS liblzma::liblzma) to the config file. Then both spellings work. To make the behavior consistent between case sensitive and insensitive file systems, the config and related files are renamed from liblzmaConfig.cmake to liblzma-config.cmake style. With this style CMake looks for lowercase version of the package name so find_package(LiBLzmA 5.2.5 REQUIRED CONFIG) will work to find our config file. There are other differences between our config file and FindLibLZMA so it's still possible that things break for reasons other than the spelling of the target name. Hopefully those situations aren't too common. When the config file is available, it should always give as good or better results as FindLibLZMA so this commit doesn't affect the recommendation to use find_package(liblzma 5.2.5 REQUIRED CONFIG) which explicitly avoids FindLibLZMA. Thanks to Markus Rickert.
2021-01-30 17:36:04 +01:00
install(FILES "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config.cmake"
"${CMAKE_CURRENT_BINARY_DIR}/liblzma-config-version.cmake"
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
DESTINATION "${liblzma_INSTALL_CMAKEDIR}"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
COMPONENT liblzma_Development)
CMake: Generate and install liblzma.pc if not using MSVC. Autotools based build uses -pthread and thus adds it to Libs.private in liblzma.pc. CMake doesn't use -pthread at all if pthread functions are available in libc so Libs.private doesn't get -pthread either.
2023-09-30 01:14:25 +02:00
if(NOT MSVC)
install(FILES "${CMAKE_CURRENT_BINARY_DIR}/liblzma.pc"
DESTINATION "${CMAKE_INSTALL_LIBDIR}/pkgconfig"
COMPONENT liblzma_Development)
endif()
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
#############################################################################
CMake: Add support for replacement getopt_long (lib/getopt*). Thanks to Jia Tan for the initial work. I added the libgnu target and made a few related minor edits.
2023-09-12 21:16:56 +02:00
# libgnu (getopt_long)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
#############################################################################
CMake: Add support for replacement getopt_long (lib/getopt*). Thanks to Jia Tan for the initial work. I added the libgnu target and made a few related minor edits.
2023-09-12 21:16:56 +02:00
# This mirrors how the Autotools build system handles the getopt_long
# replacement, calling the object library libgnu since the replacement
# version comes from Gnulib.
add_library(libgnu OBJECT)
# CMake requires that even an object library must have at least once source
# file. So we give it a header file that results in no output files.
target_sources(libgnu PRIVATE lib/getopt.in.h)
CMake: Specify LINKER_LANGUAGE for libgnu target to fix Ninja Generator. CMake is unable to guess the linker language for just a header file so it must be explicitly set.
2023-09-29 13:58:44 +02:00
# The Ninja Generator requires setting the linker language since it cannot
# guess the programming language of just a header file. Setting this
# property avoids needing an empty .c file or an non-empty unnecessary .c
# file.
set_target_properties(libgnu PROPERTIES LINKER_LANGUAGE C)
CMake: Add support for replacement getopt_long (lib/getopt*). Thanks to Jia Tan for the initial work. I added the libgnu target and made a few related minor edits.
2023-09-12 21:16:56 +02:00
# Create /lib directory in the build directory and add it to the include path.
file(MAKE_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/lib")
target_include_directories(libgnu PUBLIC "${CMAKE_CURRENT_BINARY_DIR}/lib")
CMake: Add /lib to include path.
2023-09-25 18:09:53 +02:00
# Include /lib from the source directory. It does no harm even if none of
# the Gnulib replacements are used.
target_include_directories(libgnu PUBLIC lib)
CMake: Add support for replacement getopt_long (lib/getopt*). Thanks to Jia Tan for the initial work. I added the libgnu target and made a few related minor edits.
2023-09-12 21:16:56 +02:00
# The command line tools need getopt_long in order to parse arguments. If
# the system does not have a getopt_long implementation we can use the one
# from Gnulib instead.
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
check_symbol_exists(getopt_long getopt.h HAVE_GETOPT_LONG)
CMake: Add support for replacement getopt_long (lib/getopt*). Thanks to Jia Tan for the initial work. I added the libgnu target and made a few related minor edits.
2023-09-12 21:16:56 +02:00
if(NOT HAVE_GETOPT_LONG)
# Set the __GETOPT_PREFIX definition to "rpl_" (replacement) to avoid
# name conflicts with libc symbols. The same prefix is set if using
# the Autotools build (m4/getopt.m4).
target_compile_definitions(libgnu PUBLIC "__GETOPT_PREFIX=rpl_")
# Create a custom copy command to copy the getopt header to the build
# directory and re-copy it if it is updated. (Gnulib does it this way
# because it allows choosing which .in.h files to actually use in the
# build. We need just getopt.h so this is a bit overcomplicated for
# a single header file only.)
add_custom_command(OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/lib/getopt.h"
COMMAND "${CMAKE_COMMAND}" -E copy
"${CMAKE_CURRENT_SOURCE_DIR}/lib/getopt.in.h"
"${CMAKE_CURRENT_BINARY_DIR}/lib/getopt.h"
MAIN_DEPENDENCY "${CMAKE_CURRENT_SOURCE_DIR}/lib/getopt.in.h"
VERBATIM)
target_sources(libgnu PRIVATE
lib/getopt1.c
lib/getopt.c
lib/getopt_int.h
CMake: Update libgnu target with new header files.
2023-09-24 14:36:34 +02:00
lib/getopt-cdefs.h
lib/getopt-core.h
lib/getopt-ext.h
lib/getopt-pfx-core.h
lib/getopt-pfx-ext.h
CMake: Add support for replacement getopt_long (lib/getopt*). Thanks to Jia Tan for the initial work. I added the libgnu target and made a few related minor edits.
2023-09-12 21:16:56 +02:00
"${CMAKE_CURRENT_BINARY_DIR}/lib/getopt.h"
)
endif()
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
#############################################################################
# xzdec
#############################################################################
CMake: Require VS2015 or later for building xzdec. xzdec might build with VS2013 but it hasn't been tested. It was never supported before and VS2013 is old anyway so for simplicity only liblzma is supported with VS2013.
2023-09-21 18:17:40 +02:00
if(HAVE_DECODERS AND (NOT MSVC OR MSVC_VERSION GREATER_EQUAL 1900))
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
add_executable(xzdec
src/common/sysdefs.h
src/common/tuklib_common.h
src/common/tuklib_config.h
src/common/tuklib_exit.c
src/common/tuklib_exit.h
src/common/tuklib_gettext.h
src/common/tuklib_progname.c
src/common/tuklib_progname.h
src/xzdec/xzdec.c
)
target_include_directories(xzdec PRIVATE
src/common
src/liblzma/api
)
CMake: Add support for replacement getopt_long (lib/getopt*). Thanks to Jia Tan for the initial work. I added the libgnu target and made a few related minor edits.
2023-09-12 21:16:56 +02:00
target_link_libraries(xzdec PRIVATE liblzma libgnu)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
CMake/Windows: Add resource files to xz.exe and xzdec.exe. The command line tools cannot be built with MSVC for now but they can be built with MinGW-w64. Thanks to Iouri Kharon for the bug report and the original patch.
2023-01-07 18:50:03 +01:00
if(WIN32)
# Add the Windows resource file for xzdec.exe.
CMake: Fix a copypaste error in xzdec Windows resource file handling. It was my mistake. Thanks to Iouri Kharon for the bug report.
2023-01-09 10:27:24 +01:00
target_sources(xzdec PRIVATE src/xzdec/xzdec_w32res.rc)
set_target_properties(xzdec PROPERTIES
CMake/Windows: Add resource files to xz.exe and xzdec.exe. The command line tools cannot be built with MSVC for now but they can be built with MinGW-w64. Thanks to Iouri Kharon for the bug report and the original patch.
2023-01-07 18:50:03 +01:00
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
)
endif()
CMake: Move sandbox detection outside of xz section. The sandbox is now enabled for xzdec as well, so it no longer belongs in just the xz section. xz and xzdec are always built, except for older MSVC versions, so there isn't a need to conditionally show the sandbox configuration. CMake will do a little unecessary work on older MSVC versions that can't build xz or xzdec, but this is a very small downside.
2023-12-20 15:39:13 +01:00
if(SANDBOX_COMPILE_DEFINITION)
target_compile_definitions(xzdec PRIVATE
"${SANDBOX_COMPILE_DEFINITION}")
endif()
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
tuklib_progname(xzdec)
install(TARGETS xzdec
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
COMPONENT xzdec)
if(UNIX)
install(FILES src/xzdec/xzdec.1
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
DESTINATION "${CMAKE_INSTALL_MANDIR}/man1"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
COMPONENT xzdec)
endif()
endif()
#############################################################################
# xz
#############################################################################
CMake: Allow building xz with Visual Studio 2015 and later. Building the command line tools xz and xzdec with the combination of CMake + Visual Studio 2015/2017/2019/2022 works now. VS2013 update 2 should still be able to build liblzma. VS2013 cannot build the xz command line tool because xz needs snprintf() that roughly conforms to C99. VS2013 is old and no extra code will be added to support it. Thanks to Kelvin Lee and Jia Tan for testing.
2023-09-12 22:43:49 +02:00
if(NOT MSVC OR MSVC_VERSION GREATER_EQUAL 1900)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
add_executable(xz
src/common/mythread.h
src/common/sysdefs.h
src/common/tuklib_common.h
src/common/tuklib_config.h
src/common/tuklib_exit.c
src/common/tuklib_exit.h
src/common/tuklib_gettext.h
src/common/tuklib_integer.h
src/common/tuklib_mbstr.h
src/common/tuklib_mbstr_fw.c
src/common/tuklib_mbstr_width.c
src/common/tuklib_open_stdxxx.c
src/common/tuklib_open_stdxxx.h
src/common/tuklib_progname.c
src/common/tuklib_progname.h
src/xz/args.c
src/xz/args.h
src/xz/coder.c
src/xz/coder.h
src/xz/file_io.c
src/xz/file_io.h
src/xz/hardware.c
src/xz/hardware.h
src/xz/main.c
src/xz/main.h
src/xz/message.c
src/xz/message.h
src/xz/mytime.c
src/xz/mytime.h
src/xz/options.c
src/xz/options.h
src/xz/private.h
src/xz/signals.c
src/xz/signals.h
src/xz/suffix.c
src/xz/suffix.h
src/xz/util.c
src/xz/util.h
)
target_include_directories(xz PRIVATE
src/common
src/liblzma/api
)
CMake: Conditionally build xz list.* files if decoders are enabled.
2023-03-21 16:36:00 +01:00
if(HAVE_DECODERS)
target_sources(xz PRIVATE
src/xz/list.c
src/xz/list.h
)
endif()
CMake: Add support for replacement getopt_long (lib/getopt*). Thanks to Jia Tan for the initial work. I added the libgnu target and made a few related minor edits.
2023-09-12 21:16:56 +02:00
target_link_libraries(xz PRIVATE liblzma libgnu)
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
target_compile_definitions(xz PRIVATE ASSUME_RAM=128)
CMake/Windows: Add resource files to xz.exe and xzdec.exe. The command line tools cannot be built with MSVC for now but they can be built with MinGW-w64. Thanks to Iouri Kharon for the bug report and the original patch.
2023-01-07 18:50:03 +01:00
if(WIN32)
# Add the Windows resource file for xz.exe.
target_sources(xz PRIVATE src/xz/xz_w32res.rc)
set_target_properties(xz PROPERTIES
LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
)
endif()
CMake: Move sandbox detection outside of xz section. The sandbox is now enabled for xzdec as well, so it no longer belongs in just the xz section. xz and xzdec are always built, except for older MSVC versions, so there isn't a need to conditionally show the sandbox configuration. CMake will do a little unecessary work on older MSVC versions that can't build xz or xzdec, but this is a very small downside.
2023-12-20 15:39:13 +01:00
if(SANDBOX_COMPILE_DEFINITION)
target_compile_definitions(xz PRIVATE "${SANDBOX_COMPILE_DEFINITION}")
endif()
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
tuklib_progname(xz)
tuklib_mbstr(xz)
check_symbol_exists(optreset getopt.h HAVE_OPTRESET)
tuklib_add_definition_if(xz HAVE_OPTRESET)
check_symbol_exists(posix_fadvise fcntl.h HAVE_POSIX_FADVISE)
tuklib_add_definition_if(xz HAVE_POSIX_FADVISE)
# How to get file time:
check_struct_has_member("struct stat" st_atim.tv_nsec
"sys/types.h;sys/stat.h"
HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC)
if(HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC)
tuklib_add_definitions(xz HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC)
else()
check_struct_has_member("struct stat" st_atimespec.tv_nsec
"sys/types.h;sys/stat.h"
HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC)
if(HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC)
tuklib_add_definitions(xz HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC)
else()
check_struct_has_member("struct stat" st_atimensec
"sys/types.h;sys/stat.h"
HAVE_STRUCT_STAT_ST_ATIMENSEC)
tuklib_add_definition_if(xz HAVE_STRUCT_STAT_ST_ATIMENSEC)
endif()
endif()
# How to set file time:
check_symbol_exists(futimens "sys/types.h;sys/stat.h" HAVE_FUTIMENS)
if(HAVE_FUTIMENS)
tuklib_add_definitions(xz HAVE_FUTIMENS)
else()
check_symbol_exists(futimes "sys/time.h" HAVE_FUTIMES)
if(HAVE_FUTIMES)
tuklib_add_definitions(xz HAVE_FUTIMES)
else()
check_symbol_exists(futimesat "sys/time.h" HAVE_FUTIMESAT)
if(HAVE_FUTIMESAT)
tuklib_add_definitions(xz HAVE_FUTIMESAT)
else()
check_symbol_exists(utimes "sys/time.h" HAVE_UTIMES)
if(HAVE_UTIMES)
tuklib_add_definitions(xz HAVE_UTIMES)
else()
check_symbol_exists(_futime "sys/utime.h" HAVE__FUTIME)
if(HAVE__FUTIME)
tuklib_add_definitions(xz HAVE__FUTIME)
else()
check_symbol_exists(utime "utime.h" HAVE_UTIME)
tuklib_add_definition_if(xz HAVE_UTIME)
endif()
endif()
endif()
endif()
endif()
install(TARGETS xz
Build: Fix bugs in the CMake files. Seems that the phrase "add more quotes" from sh/bash scripting applies to CMake as well. E.g. passing an unquoted list ${FOO} to a function that expects one argument results in only the first element of the list being passed as an argument and the rest get ignored. Adding quotes helps ("${FOO}"). list(INSERT ...) is weird. Inserting an empty string to an empty variable results in empty list, but inserting it to a non-empty variable does insert an empty element to the list. Since INSERT requires at least one element, "${CMAKE_THREAD_LIBS_INIT}" needs to be quoted in CMakeLists.txt. It might result in an empty element in the list. It seems to not matter as empty elements consistently get ignored in that variable. In fact, calling cmake_check_push_state() and cmake_check_pop_state() will strip the empty elements from CMAKE_REQUIRED_LIBRARIES! In addition to quoting fixes, this fixes checks for the cache variables in tuklib_cpucores.cmake and tuklib_physmem.cmake. Thanks to Martin Matuška for testing and reporting the problems. These fixes aren't tested yet but hopefully they soon will be.
2020-02-25 19:42:31 +01:00
RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
COMPONENT xz)
CMake: Put xz man page install under if(UNIX) like is for xzdec. Thanks to Jia Tan.
2022-08-31 15:29:38 +02:00
if(UNIX)
install(FILES src/xz/xz.1
DESTINATION "${CMAKE_INSTALL_MANDIR}/man1"
COMPONENT xz)
CMake: Add xz symlinks. These are a minor thing especially since the xz build has some real problems still like lack of large file support on 32-bit systems but I'll commit this since the code exists. Thanks to Jia Tan.
2022-08-31 15:42:04 +02:00
option(CREATE_XZ_SYMLINKS "Create unxz and xzcat symlinks" ON)
option(CREATE_LZMA_SYMLINKS "Create lzma, unlzma, and lzcat symlinks"
ON)
set(XZ_LINKS)
if(CREATE_XZ_SYMLINKS)
list(APPEND XZ_LINKS "unxz" "xzcat")
endif()
if(CREATE_LZMA_SYMLINKS)
list(APPEND XZ_LINKS "lzma" "unlzma" "lzcat")
endif()
CMake: Conditionally allow the creation of broken symlinks. The CMake build will try to create broken symlinks on Unix and Unix-like platforms. Cygwin and MSYS2 are Unix-like, but may not be able to create broken symlinks. The value of the CYGWIN or MSYS environment variables determine if broken symlinks are valid. The default for MSYS2 does not allow for broken symlinks, so the CMake build has been broken for MSYS2 since commit 80a1a8bb838842a2be343bd88ad1462c21c5e2c9.
2023-07-28 16:03:08 +02:00
# With Windows Cygwin and MSYS2 the symlinking is complicated. Both
# of these environments set the UNIX variable so they will try to
# make the symlinks. The ability for Cygwin and MSYS2 to make
# broken symlinks is determined by the CYGWIN and MSYS2 environment
Docs: Fix typos found by codespell
2023-07-31 14:02:21 +02:00
# variables, respectively. Broken symlinks are needed for the man
CMake: Conditionally allow the creation of broken symlinks. The CMake build will try to create broken symlinks on Unix and Unix-like platforms. Cygwin and MSYS2 are Unix-like, but may not be able to create broken symlinks. The value of the CYGWIN or MSYS environment variables determine if broken symlinks are valid. The default for MSYS2 does not allow for broken symlinks, so the CMake build has been broken for MSYS2 since commit 80a1a8bb838842a2be343bd88ad1462c21c5e2c9.
2023-07-28 16:03:08 +02:00
# page symlinks and for determining if the xz and lzma symlinks need
# to depend on the xz target or not. If broken symlinks cannot be
# made then the xz binary must be created before the symlinks.
set(ALLOW_BROKEN_SYMLINKS ON)
if(CMAKE_SYSTEM_NAME STREQUAL "CYGWIN")
# The Cygwin env variable can be set to four possible values:
#
# 1. "lnk". Create symlinks as Windows shortcuts.
#
# 2. "native". Create symlinks as native Windows symlinks
# if supported by the system. Fallback to "lnk" if native
# symlinks are not supported.
#
# 3. "nativestrict". Create symlinks as native Windows symlinks
# if supported by the system. If the target of the symlink
# does not exist or the creation of the symlink fails for any
# reason, do not create the symlink.
#
# 4. "sys". Create symlinks as plain files with a special
# system attribute containing the path to the symlink target.
#
# So, the only case we care about for broken symlinks is
# "nativestrict" since all other values mean that broken
# symlinks are allowed. If the env variable is not set the
Docs: Fix typos found by codespell
2023-07-31 14:02:21 +02:00
# default is "native". If the env variable is set but not
CMake: Conditionally allow the creation of broken symlinks. The CMake build will try to create broken symlinks on Unix and Unix-like platforms. Cygwin and MSYS2 are Unix-like, but may not be able to create broken symlinks. The value of the CYGWIN or MSYS environment variables determine if broken symlinks are valid. The default for MSYS2 does not allow for broken symlinks, so the CMake build has been broken for MSYS2 since commit 80a1a8bb838842a2be343bd88ad1462c21c5e2c9.
2023-07-28 16:03:08 +02:00
# assigned one of the four values, then the default is the same
# as option 1 "lnk".
string(FIND "$ENV{CYGWIN}" "winsymlinks:nativestrict" SYMLINK_POS)
if(SYMLINK_POS GREATER -1)
set(ALLOW_BROKEN_SYMLINKS OFF)
endif()
elseif(CMAKE_SYSTEM_NAME STREQUAL "MSYS")
# The MSYS env variable behaves similar to the CYGWIN but has a
# different default behavior. If winsymlinks is set but not
# assigned one of the four supported values, the default is to
# *copy* the target to the symlink destination. This will fail
# if the target does not exist so broken symlinks cannot be
# allowed.
string(FIND "$ENV{MSYS}" "winsymlinks" SYMLINK_POS)
if(SYMLINK_POS GREATER -1)
string(FIND "$ENV{MSYS}" "winsymlinks:nativestrict"
SYMLINK_POS)
if(SYMLINK_POS GREATER -1)
set(ALLOW_BROKEN_SYMLINKS OFF)
endif()
else()
set(ALLOW_BROKEN_SYMLINKS OFF)
endif()
endif()
CMake: Add xz symlinks. These are a minor thing especially since the xz build has some real problems still like lack of large file support on 32-bit systems but I'll commit this since the code exists. Thanks to Jia Tan.
2022-08-31 15:42:04 +02:00
# Create symlinks in the build directory and then install them.
#
CMake: Clarify a comment about Windows symlinks without file extension.
2022-09-08 14:07:00 +02:00
# The symlinks do not likely need any special extension since
# even on Windows the symlink can still be executed without
# the .exe extension.
CMake: Add xz symlinks. These are a minor thing especially since the xz build has some real problems still like lack of large file support on 32-bit systems but I'll commit this since the code exists. Thanks to Jia Tan.
2022-08-31 15:42:04 +02:00
foreach(LINK IN LISTS XZ_LINKS)
CMake: Rename xz and man page symlink custom targets. The Ninja Generator for CMake cannot have a custom target and its BYPRODUCTS have the same name. This has prevented Ninja builds on Unix-like systems since the xz symlinks were introduced in 80a1a8bb838842a2be343bd88ad1462c21c5e2c9.
2023-09-29 14:14:39 +02:00
add_custom_target("create_${LINK}" ALL
CMake: Add xz symlinks. These are a minor thing especially since the xz build has some real problems still like lack of large file support on 32-bit systems but I'll commit this since the code exists. Thanks to Jia Tan.
2022-08-31 15:42:04 +02:00
"${CMAKE_COMMAND}" -E create_symlink
"$<TARGET_FILE_NAME:xz>" "${LINK}"
BYPRODUCTS "${LINK}"
VERBATIM)
install(FILES "${CMAKE_CURRENT_BINARY_DIR}/${LINK}"
DESTINATION "${CMAKE_INSTALL_BINDIR}"
COMPONENT xz)
CMake: Conditionally allow the creation of broken symlinks. The CMake build will try to create broken symlinks on Unix and Unix-like platforms. Cygwin and MSYS2 are Unix-like, but may not be able to create broken symlinks. The value of the CYGWIN or MSYS environment variables determine if broken symlinks are valid. The default for MSYS2 does not allow for broken symlinks, so the CMake build has been broken for MSYS2 since commit 80a1a8bb838842a2be343bd88ad1462c21c5e2c9.
2023-07-28 16:03:08 +02:00
# Only create the man page symlinks if the symlinks can be
# created broken. The symlinks will not be valid until install
# so they cannot be created on these system environments.
if(ALLOW_BROKEN_SYMLINKS)
CMake: Rename xz and man page symlink custom targets. The Ninja Generator for CMake cannot have a custom target and its BYPRODUCTS have the same name. This has prevented Ninja builds on Unix-like systems since the xz symlinks were introduced in 80a1a8bb838842a2be343bd88ad1462c21c5e2c9.
2023-09-29 14:14:39 +02:00
add_custom_target("create_${LINK}.1" ALL
CMake: Conditionally allow the creation of broken symlinks. The CMake build will try to create broken symlinks on Unix and Unix-like platforms. Cygwin and MSYS2 are Unix-like, but may not be able to create broken symlinks. The value of the CYGWIN or MSYS environment variables determine if broken symlinks are valid. The default for MSYS2 does not allow for broken symlinks, so the CMake build has been broken for MSYS2 since commit 80a1a8bb838842a2be343bd88ad1462c21c5e2c9.
2023-07-28 16:03:08 +02:00
"${CMAKE_COMMAND}" -E create_symlink "xz.1" "${LINK}.1"
BYPRODUCTS "${LINK}.1"
VERBATIM)
install(FILES "${CMAKE_CURRENT_BINARY_DIR}/${LINK}.1"
DESTINATION "${CMAKE_INSTALL_MANDIR}/man1"
COMPONENT xz)
else()
# Add the xz target as dependency when broken symlinks
# cannot be made. This ensures parallel builds do not fail
# since it will enforce the order of creating xz first, then
# the symlinks.
CMake: Rename xz and man page symlink custom targets. The Ninja Generator for CMake cannot have a custom target and its BYPRODUCTS have the same name. This has prevented Ninja builds on Unix-like systems since the xz symlinks were introduced in 80a1a8bb838842a2be343bd88ad1462c21c5e2c9.
2023-09-29 14:14:39 +02:00
add_dependencies("create_${LINK}" xz)
CMake: Conditionally allow the creation of broken symlinks. The CMake build will try to create broken symlinks on Unix and Unix-like platforms. Cygwin and MSYS2 are Unix-like, but may not be able to create broken symlinks. The value of the CYGWIN or MSYS environment variables determine if broken symlinks are valid. The default for MSYS2 does not allow for broken symlinks, so the CMake build has been broken for MSYS2 since commit 80a1a8bb838842a2be343bd88ad1462c21c5e2c9.
2023-07-28 16:03:08 +02:00
endif()
CMake: Add xz symlinks. These are a minor thing especially since the xz build has some real problems still like lack of large file support on 32-bit systems but I'll commit this since the code exists. Thanks to Jia Tan.
2022-08-31 15:42:04 +02:00
endforeach()
CMake: Put xz man page install under if(UNIX) like is for xzdec. Thanks to Jia Tan.
2022-08-31 15:29:38 +02:00
endif()
Build: Add very limited experimental CMake support. This does *NOT* replace the Autotools-based build system in the foreseeable future. See the comment in the beginning of CMakeLists.txt. So far this has been tested only on GNU/Linux but I commit it anyway to make it easier for others to test. Since I haven't played much with CMake before, it's likely that there are things that have been done in a silly or wrong way and need to be fixed.
2020-02-24 22:38:16 +01:00
endif()
CMake: Add liblzma tests. Thanks to Jia Tan for the patch.
2022-08-22 15:46:18 +02:00
#############################################################################
# Tests
#############################################################################
include(CTest)
if(BUILD_TESTING)
set(LIBLZMA_TESTS
test_bcj_exact_size
test_block_header
test_check
test_filter_flags
Tests: Create test_filter_str.c. Tests lzma_str_to_filters(), lzma_str_from_filters(), and lzma_str_list_filters() API functions.
2023-02-02 17:32:47 +01:00
test_filter_str
CMake: Add liblzma tests. Thanks to Jia Tan for the patch.
2022-08-22 15:46:18 +02:00
test_hardware
test_index
Tests: Creates test_index_hash.c Tests all API functions exported from index_hash.h. Does not have a dedicated test for lzma_index_hash_end.
2022-12-28 17:25:18 +01:00
test_index_hash
CMake: Add LZIP decoder test to list of tests.
2023-02-22 13:59:41 +01:00
test_lzip_decoder
CMake: Adds test_memlimit to CMake tests
2022-11-19 16:18:04 +01:00
test_memlimit
CMake: Add liblzma tests. Thanks to Jia Tan for the patch.
2022-08-22 15:46:18 +02:00
test_stream_flags
test_vli
)
foreach(TEST IN LISTS LIBLZMA_TESTS)
add_executable("${TEST}" "tests/${TEST}.c")
target_include_directories("${TEST}" PRIVATE
src/common
src/liblzma/api
Tests: Creates test_index_hash.c Tests all API functions exported from index_hash.h. Does not have a dedicated test for lzma_index_hash_end.
2022-12-28 17:25:18 +01:00
src/liblzma
CMake: Add liblzma tests. Thanks to Jia Tan for the patch.
2022-08-22 15:46:18 +02:00
)
target_link_libraries("${TEST}" PRIVATE liblzma)
# Put the test programs into their own subdirectory so they don't
# pollute the top-level dir which might contain xz and xzdec.
set_target_properties("${TEST}" PROPERTIES
RUNTIME_OUTPUT_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/tests_bin"
)
add_test(NAME "${TEST}"
COMMAND "${CMAKE_CURRENT_BINARY_DIR}/tests_bin/${TEST}"
)
# Set srcdir environment variable so that the tests find their
# input files from the source tree.
#
# Set the return code for skipped tests to match Automake convention.
set_tests_properties("${TEST}" PROPERTIES
CMake: Change one CMAKE_CURRENT_SOURCE_DIR to CMAKE_CURRENT_LIST_DIR. In this case they have identical values.
2023-10-26 20:44:42 +02:00
ENVIRONMENT "srcdir=${CMAKE_CURRENT_SOURCE_DIR}/tests"
CMake: Add liblzma tests. Thanks to Jia Tan for the patch.
2022-08-22 15:46:18 +02:00
SKIP_RETURN_CODE 77
)
endforeach()
endif()
Copy permalink