diff --git a/configure.ac b/configure.ac
index 88aca89a..fbe023a3 100644
--- a/configure.ac
+++ b/configure.ac
@@ -102,9 +102,9 @@ AM_CONDITIONAL(COND_MAIN_DECODER, test "x$enable_decoder" = xyes)
 # Filters #
 ###########
 
-m4_define([SUPPORTED_FILTERS], [lzma,lzma2,subblock,delta,x86,powerpc,ia64,arm,armthumb,sparc])dnl
+m4_define([SUPPORTED_FILTERS], [lzma1,lzma2,subblock,delta,x86,powerpc,ia64,arm,armthumb,sparc])dnl
 m4_define([SIMPLE_FILTERS], [x86,powerpc,ia64,arm,armthumb,sparc])
-m4_define([LZ_FILTERS], [lzma,lzma2])
+m4_define([LZ_FILTERS], [lzma1,lzma2])
 
 m4_foreach([NAME], [SUPPORTED_FILTERS],
 [enable_filter_[]NAME=no
@@ -165,16 +165,16 @@ else
 		esac
 	done
 
-	# LZMA2 requires that LZMA is enabled.
-	test "x$enable_encoder_lzma2" = xyes && enable_encoder_lzma=yes
-	test "x$enable_decoder_lzma2" = xyes && enable_decoder_lzma=yes
+	# LZMA2 requires that LZMA1 is enabled.
+	test "x$enable_encoder_lzma2" = xyes && enable_encoder_lzma1=yes
+	test "x$enable_decoder_lzma2" = xyes && enable_decoder_lzma1=yes
 
 	AC_MSG_RESULT([$enable_decoders])
 fi
 
-if test "x$enable_encoder_lzma2$enable_encoder_lzma" = xyesno \
-		|| test "x$enable_decoder_lzma2$enable_decoder_lzma" = xyesno; then
-	AC_MSG_ERROR([LZMA2 requires that LZMA is also enabled.])
+if test "x$enable_encoder_lzma2$enable_encoder_lzma1" = xyesno \
+		|| test "x$enable_decoder_lzma2$enable_decoder_lzma1" = xyesno; then
+	AC_MSG_ERROR([LZMA2 requires that LZMA1 is also enabled.])
 fi
 
 m4_foreach([NAME], [SUPPORTED_FILTERS],
@@ -224,7 +224,7 @@ AC_MSG_CHECKING([which match finders to build])
 AC_ARG_ENABLE(match-finders, AC_HELP_STRING([--enable-match-finders=LIST],
 		[Comma-separated list of match finders to build. Default=all.
 		At least one match finder is required for encoding with
-		the LZMA filter. Available match finders:]
+		the LZMA1 and LZMA2 filters. Available match finders:]
 		m4_translit(m4_defn([SUPPORTED_MATCH_FINDERS]), [,], [ ])), [],
 	[enable_match_finders=SUPPORTED_MATCH_FINDERS])
 enable_match_finders=`echo "$enable_match_finders" | sed 's/,/ /g'`
diff --git a/debug/full_flush.c b/debug/full_flush.c
index 50725360..3c914549 100644
--- a/debug/full_flush.c
+++ b/debug/full_flush.c
@@ -74,9 +74,14 @@ main(int argc, char **argv)
 
 
 	// Config
+	lzma_options_lzma opt_lzma;
+	if (lzma_lzma_preset(&opt_lzma, 0)) {
+		fprintf(stderr, "preset failed\n");
+		exit(1);
+	}
 	lzma_filter filters[LZMA_BLOCK_FILTERS_MAX + 1];
 	filters[0].id = LZMA_FILTER_LZMA2;
-	filters[0].options = (void *)&lzma_preset_lzma[0];
+	filters[0].options = &opt_lzma;
 	filters[1].id = LZMA_VLI_UNKNOWN;
 
 	// Init
diff --git a/debug/known_sizes.c b/debug/known_sizes.c
index beb05fde..ef7472de 100644
--- a/debug/known_sizes.c
+++ b/debug/known_sizes.c
@@ -47,10 +47,14 @@ main(void)
 	const size_t in_size = fread(in, 1, BUFFER_SIZE, stdin);
 
 	// Filter setup
+	lzma_options_lzma opt_lzma;
+	if (lzma_lzma_preset(&opt_lzma, 0))
+		return 1;
+	
 	lzma_filter filters[] = {
 		{
 			.id = LZMA_FILTER_LZMA2,
-			.options = (void *)(&lzma_preset_lzma[0])
+			.options = &opt_lzma
 		},
 		{
 			.id = LZMA_VLI_UNKNOWN
diff --git a/debug/memusage.c b/debug/memusage.c
index eaf81f95..2dbb39e0 100644
--- a/debug/memusage.c
+++ b/debug/memusage.c
@@ -26,27 +26,27 @@ main(void)
 	lzma_init();
 
 	lzma_options_lzma lzma = {
-		.dictionary_size = (1 << 27) + (1 << 26),
-		.literal_context_bits = 3,
-		.literal_pos_bits = 0,
-		.pos_bits = 2,
-		.preset_dictionary = NULL,
-		.preset_dictionary_size = 0,
+		.dict_size = (1U << 27) + (1U << 26),
+		.lc = 3,
+		.lp = 0,
+		.pb = 2,
+		.preset_dict = NULL,
+		.preset_dict_size = 0,
 		.mode = LZMA_MODE_NORMAL,
-		.fast_bytes = 48,
-		.match_finder = LZMA_MF_BT4,
-		.match_finder_cycles = 0,
+		.nice_len = 48,
+		.mf = LZMA_MF_BT4,
+		.depth = 0,
 	};
 
 /*
 	lzma_options_filter filters[] = {
-		{ LZMA_FILTER_LZMA,
+		{ LZMA_FILTER_LZMA1,
 			(lzma_options_lzma *)&lzma_preset_lzma[6 - 1] },
 		{ UINT64_MAX, NULL }
 	};
 */
 	lzma_filter filters[] = {
-		{ LZMA_FILTER_LZMA, &lzma },
+		{ LZMA_FILTER_LZMA1, &lzma },
 		{ UINT64_MAX, NULL }
 	};
 
diff --git a/debug/sync_flush.c b/debug/sync_flush.c
index 9e140fb6..a161ca31 100644
--- a/debug/sync_flush.c
+++ b/debug/sync_flush.c
@@ -74,16 +74,16 @@ main(int argc, char **argv)
 
 	// Config
 	lzma_options_lzma opt_lzma = {
-		.dictionary_size = 1 << 16,
-		.literal_context_bits = LZMA_LITERAL_CONTEXT_BITS_DEFAULT,
-		.literal_pos_bits = LZMA_LITERAL_POS_BITS_DEFAULT,
-		.pos_bits = LZMA_POS_BITS_DEFAULT,
-		.preset_dictionary = NULL,
+		.dict_size = 1U << 16,
+		.lc = LZMA_LC_DEFAULT,
+		.lp = LZMA_LP_DEFAULT,
+		.pb = LZMA_PB_DEFAULT,
+		.preset_dict = NULL,
 		.persistent = true,
 		.mode = LZMA_MODE_NORMAL,
-		.fast_bytes = 32,
-		.match_finder = LZMA_MF_HC3,
-		.match_finder_cycles = 0,
+		.nice_len = 32,
+		.mf = LZMA_MF_HC3,
+		.depth = 0,
 	};
 
 	lzma_options_delta opt_delta = {
@@ -97,7 +97,7 @@ main(int argc, char **argv)
 		.rle = 1, // LZMA_SUBBLOCK_RLE_OFF,
 		.subfilter_mode = LZMA_SUBFILTER_SET,
 	};
-	opt_subblock.subfilter_options.id = LZMA_FILTER_LZMA;
+	opt_subblock.subfilter_options.id = LZMA_FILTER_LZMA1;
 	opt_subblock.subfilter_options.options = &opt_lzma;
 	opt_subblock.subfilter_options.id = LZMA_FILTER_DELTA;
 	opt_subblock.subfilter_options.options = &opt_delta;
diff --git a/src/liblzma/Makefile.am b/src/liblzma/Makefile.am
index a234bfd5..46a80835 100644
--- a/src/liblzma/Makefile.am
+++ b/src/liblzma/Makefile.am
@@ -27,7 +27,7 @@ SUBDIRS += lz
 liblzma_la_LIBADD += lz/liblz.la
 endif
 
-if COND_FILTER_LZMA
+if COND_FILTER_LZMA1
 SUBDIRS += lzma rangecoder
 liblzma_la_LIBADD += \
 	lzma/liblzma2.la \
diff --git a/src/liblzma/api/lzma/delta.h b/src/liblzma/api/lzma/delta.h
index 740de97c..bdb5b926 100644
--- a/src/liblzma/api/lzma/delta.h
+++ b/src/liblzma/api/lzma/delta.h
@@ -60,9 +60,9 @@ typedef struct {
 	 *  - 16-bit stereo audio: distance = 4 bytes
 	 *  - 24-bit RGB image data: distance = 3 bytes
 	 */
-	uint32_t distance;
-#	define LZMA_DELTA_DISTANCE_MIN 1
-#	define LZMA_DELTA_DISTANCE_MAX 256
+	uint32_t dist;
+#	define LZMA_DELTA_DIST_MIN 1
+#	define LZMA_DELTA_DIST_MAX 256
 
 	/**
 	 * \brief       Reserved space for possible future extensions
@@ -73,6 +73,8 @@ typedef struct {
 	 */
 	uint32_t reserved_int1;
 	uint32_t reserved_int2;
+	uint32_t reserved_int3;
+	uint32_t reserved_int4;
 	void *reserved_ptr1;
 	void *reserved_ptr2;
 
diff --git a/src/liblzma/api/lzma/lzma.h b/src/liblzma/api/lzma/lzma.h
index c4d5dbfa..094667eb 100644
--- a/src/liblzma/api/lzma/lzma.h
+++ b/src/liblzma/api/lzma/lzma.h
@@ -1,6 +1,6 @@
 /**
  * \file        lzma/lzma.h
- * \brief       LZMA filter
+ * \brief       LZMA1 and LZMA2 filters
  *
  * \author      Copyright (C) 1999-2006 Igor Pavlov
  * \author      Copyright (C) 2007 Lasse Collin
@@ -22,12 +22,22 @@
 
 
 /**
- * \brief       Filter ID
+ * \brief       LZMA1 Filter ID
  *
- * Filter ID of the LZMA filter. This is used as lzma_filter.id.
+ * LZMA1 is the very same thing as what was called just LZMA in earlier
+ * LZMA Utils, 7-Zip, and LZMA SDK. It's called LZMA1 here to prevent
+ * developers from accidentally using LZMA when they actually want LZMA2.
  */
-#define LZMA_FILTER_LZMA        LZMA_VLI_C(0x20)
+#define LZMA_FILTER_LZMA1       LZMA_VLI_C(0x4000000000000001)
 
+/**
+ * \brief       LZMA2 Filter ID
+ *
+ * Usually you want this instead of LZMA1. Compared to LZMA1, LZMA2 adds
+ * support for LZMA_SYNC_FLUSH, uncompressed chunks (expands uncompressible
+ * data less), possibility to change lc/lp/pb in the middle of encoding, and
+ * some other internal improvements.
+ */
 #define LZMA_FILTER_LZMA2       LZMA_VLI_C(0x21)
 
 
@@ -36,55 +46,60 @@
  *
  * Match finder has major effect on both speed and compression ratio.
  * Usually hash chains are faster than binary trees.
+ *
+ * The memory usage formulas are only rough estimates, which are closest to
+ * reality when dict_size is a power of two. The formulas are  more complex
+ * in reality, and can also change a little between liblzma versions. Use
+ * lzma_memusage_encoder() to get more accurate estimate of memory usage.
  */
 typedef enum {
 	LZMA_MF_HC3     = 0x03,
 		/**<
-		 * \brief       Hash Chain with 3 bytes hashing
+		 * \brief       Hash Chain with 2- and 3-byte hashing
 		 *
-		 * \todo Memory requirements
+		 * Minimum nice_len: 3
 		 *
-		 * \note        It's possible that this match finder gets
-		 *              removed in future. The definition will stay
-		 *              in this header, but liblzma may return
-		 *              LZMA_OPTIONS_ERROR if it is specified (just
-		 *              like it would if the match finder had been
-		 *              disabled at compile time).
+		 * Memory usage:
+		 *  - dict_size <= 16 MiB: dict_size * 7.5
+		 *  - dict_size > 16 MiB: dict_size * 5.5 + 64 MiB
 		 */
 
 	LZMA_MF_HC4     = 0x04,
 		/**<
-		 * \brief       Hash Chain with 4 bytes hashing
+		 * \brief       Hash Chain with 2-, 3-, and 4-byte hashing
 		 *
-		 * Memory requirements: 7.5 * dictionary_size + 4 MiB
+		 * Minimum nice_len: 4
 		 *
-		 * \note        It's possible that this match finder gets
-		 *              removed in future. The definition will stay
-		 *              in this header, but liblzma may return
-		 *              LZMA_OPTIONS_ERROR if it is specified (just
-		 *              like it would if the match finder had been
-		 *              disabled at compile time).
+		 * Memory usage: dict_size * 7.5
 		 */
 
 	LZMA_MF_BT2     = 0x12,
 		/**<
-		 * \brief       Binary Tree with 2 bytes hashing
+		 * \brief       Binary Tree with 2-byte hashing
 		 *
-		 * Memory requirements: 9.5 * dictionary_size + 4 MiB
+		 * Minimum nice_len: 2
+		 *
+		 * Memory usage: dict_size * 9.5
 		 */
 
 	LZMA_MF_BT3     = 0x13,
 		/**<
-		 * \brief       Binary Tree with 3 bytes hashing
+		 * \brief       Binary Tree with 2- and 3-byte hashing
 		 *
-		 * Memory requirements: 11.5 * dictionary_size + 4 MiB
+		 * Minimum nice_len: 3
+		 *
+		 * Memory usage:
+		 *  - dict_size <= 16 MiB: dict_size * 11.5
+		 *  - dict_size > 16 MiB: dict_size * 9.5 + 64 MiB
 		 */
 
 	LZMA_MF_BT4     = 0x14
 		/**<
-		 * \brief       Binary Tree with 4 bytes hashing
+		 * \brief       Binary Tree with 2-, 3-, and 4-byte hashing
 		 *
-		 * Memory requirements: 11.5 * dictionary_size + 4 MiB
+		 * Minimum nice_len: 4
+		 *
+		 * Memory usage: dict_size * 11.5
 		 */
 } lzma_match_finder;
 
@@ -114,7 +129,7 @@ extern lzma_bool lzma_mf_is_supported(lzma_match_finder match_finder)
  * finder.
  */
 typedef enum {
-	LZMA_MODE_FAST = 0,
+	LZMA_MODE_FAST = 1,
 		/**<
 		 * \brief       Fast compression
 		 *
@@ -122,7 +137,7 @@ typedef enum {
 		 * a hash chain match finder.
 		 */
 
-	LZMA_MODE_NORMAL = 1
+	LZMA_MODE_NORMAL = 2
 		/**<
 		 * \brief       Normal compression
 		 *
@@ -149,7 +164,7 @@ extern lzma_bool lzma_mode_is_available(lzma_mode mode) lzma_attr_const;
 
 
 /**
- * \brief       Options specific to the LZMA method handler
+ * \brief       Options specific to the LZMA1 and LZMA2 filters
  */
 typedef struct {
 	/**********************************
@@ -167,14 +182,30 @@ typedef struct {
 	 * indicate what data to repeat from the dictionary buffer. Thus,
 	 * the bigger the dictionary, the better compression ratio usually is.
 	 *
-	 * Raw decoding: Too big dictionary does no other harm than
-	 * wasting memory. This value is ignored by lzma_raw_decode_buffer(),
-	 * because it uses the target buffer as the dictionary.
+	 * Maximum size of the dictionary depends on multiple things:
+	 *  - Memory usage limit
+	 *  - Available address space (not a problem on 64-bit systems)
+	 *  - Selected match finder (encoder only)
+	 *
+	 * Currently the maximum dictionary size for encoding is 1.5 GiB
+	 * (i.e. (UINT32_C(1) << 30) + (UINT32_C(1) << 29)) even on 64-bit
+	 * systems for certain match finder implementation reasons. In future,
+	 * there may be match finders that support bigger dictionaries (3 GiB
+	 * will probably be the maximum).
+	 *
+	 * Decoder already supports dictionaries up to 4 GiB - 1 B (i.e.
+	 * UINT32_MAX), so increasing the maximum dictionary size of the
+	 * encoder won't cause problems for old decoders.
+	 *
+	 * Because extremely small dictionaries sizes would have unneeded
+	 * overhead in the decoder, the minimum dictionary size is 4096 bytes.
+	 *
+	 * \note        When decoding, too big dictionary does no other harm
+	 *              than wasting memory.
 	 */
-	uint32_t dictionary_size;
-#	define LZMA_DICTIONARY_SIZE_MIN            (UINT32_C(1) << 12)
-#	define LZMA_DICTIONARY_SIZE_MAX            (UINT32_C(1) << 30)
-#	define LZMA_DICTIONARY_SIZE_DEFAULT        (UINT32_C(1) << 23)
+	uint32_t dict_size;
+#	define LZMA_DICT_SIZE_MIN       UINT32_C(4096)
+#	define LZMA_DICT_SIZE_DEFAULT   (UINT32_C(1) << 23)
 
 	/**
 	 * \brief       Pointer to an initial dictionary
@@ -201,18 +232,17 @@ typedef struct {
 	 *
 	 * \todo        This feature is not implemented yet.
 	 */
-	const uint8_t *preset_dictionary;
+	const uint8_t *preset_dict;
 
 	/**
 	 * \brief       Size of the preset dictionary
 	 *
 	 * Specifies the size of the preset dictionary. If the size is
-	 * bigger than dictionary_size, only the last dictionary_size
-	 * bytes are processed.
+	 * bigger than dict_size, only the last dict_size bytes are processed.
 	 *
-	 * This variable is read only when preset_dictionary is not NULL.
+	 * This variable is read only when preset_dict is not NULL.
 	 */
-	uint32_t preset_dictionary_size;
+	uint32_t preset_dict_size;
 
 	/**
 	 * \brief       Number of literal context bits
@@ -222,11 +252,21 @@ typedef struct {
 	 * account when predicting the bits of the next literal.
 	 *
 	 * \todo        Example
+	 *
+	 * There is a limit that applies to literal context bits and literal
+	 * position bits together: lc + lp <= 4. Without this limit the
+	 * decoding could become very slow, which could have security related
+	 * results in some cases like email servers doing virus scanning.
+	 * This limit also simplifies the internal implementation in liblzma.
+	 *
+	 * There may be LZMA streams that have lc + lp > 4 (maximum lc
+	 * possible would be 8). It is not possible to decode such streams
+	 * with liblzma.
 	 */
-	uint32_t literal_context_bits;
-#	define LZMA_LITERAL_CONTEXT_BITS_MIN       0
-#	define LZMA_LITERAL_CONTEXT_BITS_MAX       4
-#	define LZMA_LITERAL_CONTEXT_BITS_DEFAULT   3
+	uint32_t lc;
+#	define LZMA_LCLP_MIN    0
+#	define LZMA_LCLP_MAX    4
+#	define LZMA_LC_DEFAULT  3
 
 	/**
 	 * \brief       Number of literal position bits
@@ -238,10 +278,8 @@ typedef struct {
 	 *
 	 * \todo        Example
 	 */
-	uint32_t literal_pos_bits;
-#	define LZMA_LITERAL_POS_BITS_MIN           0
-#	define LZMA_LITERAL_POS_BITS_MAX           4
-#	define LZMA_LITERAL_POS_BITS_DEFAULT       0
+	uint32_t lp;
+#	define LZMA_LP_DEFAULT  0
 
 	/**
 	 * \brief       Number of position bits
@@ -252,14 +290,13 @@ typedef struct {
 	 * which a matching sequence is found from the dictionary and
 	 * thus can be stored as distance-length pair.
 	 *
-	 * Example: If most of the matches occur at byte positions
-	 * of 8 * n + 3, that is, 3, 11, 19, ... set pos_bits to 3,
-	 * because 2**3 == 8.
+	 * Example: If most of the matches occur at byte positions of
+	 * 8 * n + 3, that is, 3, 11, 19, ... set pb to 3, because 2**3 == 8.
 	 */
-	uint32_t pos_bits;
-#	define LZMA_POS_BITS_MIN                   0
-#	define LZMA_POS_BITS_MAX                   4
-#	define LZMA_POS_BITS_DEFAULT               2
+	uint32_t pb;
+#	define LZMA_PB_MIN      0
+#	define LZMA_PB_MAX      4
+#	define LZMA_PB_DEFAULT  2
 
 	/******************************************
 	 * LZMA options needed only when encoding *
@@ -274,7 +311,7 @@ typedef struct {
 	 * in the middle of the encoding process without resetting the encoder.
 	 *
 	 * This option is used only by LZMA2. LZMA1 ignores this and it is
-	 * safeto not initialize this when encoding with LZMA1.
+	 * safe to not initialize this when encoding with LZMA1.
 	 */
 	lzma_bool persistent;
 
@@ -282,31 +319,56 @@ typedef struct {
 	lzma_mode mode;
 
 	/**
-	 * \brief       Number of fast bytes
+	 * \brief       Nice length of a match
 	 *
-	 * Number of fast bytes determines how many bytes the encoder
-	 * compares from the match candidates when looking for the best
-	 * match. Bigger fast bytes value usually increase both compression
-	 * ratio and time.
+	 * This determines how many bytes the encoder compares from the match
+	 * candidates when looking for the best match. Once a match of at
+	 * least nice_len bytes long is found, the encoder stops looking for
+	 * better condidates and encodes the match. (Naturally, if the found
+	 * match is actually longer than nice_len, the actual length is
+	 * encoded; it's not truncated to nice_len.)
+	 *
+	 * Bigger values usually increase the compression ratio and
+	 * compression time. For most files, 30 to 100 is a good value,
+	 * which gives very good compression ratio at good speed.
+	 *
+	 * The exact minimum value depends on the match finder. The maximum is
+	 * 273, which is the maximum length of a match that LZMA can encode.
 	 */
-	uint32_t fast_bytes;
-#	define LZMA_FAST_BYTES_MIN                 5
-#	define LZMA_FAST_BYTES_MAX                 273
-#	define LZMA_FAST_BYTES_DEFAULT             128
+	uint32_t nice_len;
 
 	/** Match finder ID */
-	lzma_match_finder match_finder;
+	lzma_match_finder mf;
 
 	/**
-	 * \brief       Match finder cycles
+	 * \brief       Maximum search depth in the match finder
 	 *
-	 * Higher values give slightly better compression ratio but
-	 * decrease speed. Use special value 0 to let liblzma use
-	 * match-finder-dependent default value.
+	 * For every input byte, match finder searches through the hash chain
+	 * or binary tree in a loop, each iteration going one step deeper in
+	 * the chain or tree. The searching stops if
+	 *  - a match of at least nice_len bytes long is found;
+	 *  - all match candidates from the hash chain or binary tree have
+	 *    been checked; or
+	 *  - maximum search depth is reached.
 	 *
-	 * \todo        Write much better description.
+	 * Maximum search depth is needed to prevent the match finder from
+	 * wasting too much time in case there are lots of short match
+	 * candidates. On the other hand, stopping the search before all
+	 * candidates have been checked can reduce compression ratio.
+	 *
+	 * Setting depth to zero tells liblzma to use an automatic default
+	 * value, that depends on the selected match finder and nice_len.
+	 * The default is in the range [10, 200] or so (it may vary between
+	 * liblzma versions).
+	 *
+	 * Using a bigger depth value than the default can increase
+	 * compression ratio in some cases. There is no strict maximum value,
+	 * but high values (thousands or millions) should be used with care:
+	 * the encoder could remain fast enough with typical input, but
+	 * malicious input could cause the match finder to slow down
+	 * dramatically, possibly creating a denial of service attack.
 	 */
-	uint32_t match_finder_cycles;
+	uint32_t depth;
 
 	/**
 	 * \brief       Reserved space for possible future extensions
@@ -319,6 +381,10 @@ typedef struct {
 	uint32_t reserved_int2;
 	uint32_t reserved_int3;
 	uint32_t reserved_int4;
+	uint32_t reserved_int5;
+	uint32_t reserved_int6;
+	uint32_t reserved_int7;
+	uint32_t reserved_int8;
 	void *reserved_ptr1;
 	void *reserved_ptr2;
 
@@ -326,21 +392,13 @@ typedef struct {
 
 
 /**
- * \brief       Maximum sum of literal_context_bits and literal_pos_bits
+ * \brief       Set a compression level preset to lzma_options_lzma structure
  *
- * literal_context_bits + literal_pos_bits <= LZMA_LITERAL_BITS_MAX
- */
-#define LZMA_LITERAL_BITS_MAX 4
-
-
-/**
- * \brief       Table of presets for the LZMA filter
- *
- * lzma_preset_lzma[0] is the fastest and lzma_preset_lzma[8] is the slowest.
- * These presets match the switches -1 .. -9 of the lzma command line tool
+ * level = 0 is the fastest and level = 8 is the slowest. These presets match
+ * the switches -1 .. -9 of the command line tool.
  *
  * The preset values are subject to changes between liblzma versions.
  *
- * This variable is available only if LZMA encoder has been enabled.
+ * This function is available only if LZMA encoder has been enabled.
  */
-extern const lzma_options_lzma lzma_preset_lzma[9];
+extern lzma_bool lzma_lzma_preset(lzma_options_lzma *options, uint32_t level);
diff --git a/src/liblzma/common/alignment.c b/src/liblzma/common/alignment.c
index cfd515e6..ff38062e 100644
--- a/src/liblzma/common/alignment.c
+++ b/src/liblzma/common/alignment.c
@@ -50,10 +50,9 @@ lzma_alignment_input(const lzma_filter *filters, uint32_t guess)
 		case LZMA_FILTER_IA64:
 			return 16;
 
-		case LZMA_FILTER_LZMA: {
+		case LZMA_FILTER_LZMA1: {
 			const lzma_options_lzma *lzma = filters[i].options;
-			return 1 << MAX(lzma->pos_bits,
-					lzma->literal_pos_bits);
+			return 1 << MAX(lzma->pb, lzma->lp);
 		}
 
 		default:
@@ -91,7 +90,7 @@ lzma_alignment_output(const lzma_filter *filters, uint32_t guess)
 					filters[i].options))->alignment;
 
 		case LZMA_FILTER_X86:
-		case LZMA_FILTER_LZMA:
+		case LZMA_FILTER_LZMA1:
 			return 1;
 
 		case LZMA_FILTER_ARMTHUMB:
diff --git a/src/liblzma/common/alone_decoder.c b/src/liblzma/common/alone_decoder.c
index 45cb54e5..7ff29289 100644
--- a/src/liblzma/common/alone_decoder.c
+++ b/src/liblzma/common/alone_decoder.c
@@ -68,12 +68,11 @@ alone_decode(lzma_coder *coder,
 		break;
 
 	case SEQ_DICTIONARY_SIZE:
-		coder->options.dictionary_size
+		coder->options.dict_size
 				|= (size_t)(in[*in_pos]) << (coder->pos * 8);
 
 		if (++coder->pos == 4) {
-			if (coder->options.dictionary_size
-					> LZMA_DICTIONARY_SIZE_MAX)
+			if (coder->options.dict_size > (UINT32_C(1) << 30))
 				return LZMA_FORMAT_ERROR;
 
 			// A hack to ditch tons of false positives: We allow
@@ -81,7 +80,7 @@ alone_decode(lzma_coder *coder,
 			// LZMA_Alone created only files with 2^n, but accepts
 			// any dictionary size. If someone complains, this
 			// will be reconsidered.
-			uint32_t d = coder->options.dictionary_size - 1;
+			uint32_t d = coder->options.dict_size - 1;
 			d |= d >> 2;
 			d |= d >> 3;
 			d |= d >> 4;
@@ -89,7 +88,7 @@ alone_decode(lzma_coder *coder,
 			d |= d >> 16;
 			++d;
 
-			if (d != coder->options.dictionary_size)
+			if (d != coder->options.dict_size)
 				return LZMA_FORMAT_ERROR;
 
 			coder->pos = 0;
@@ -199,7 +198,7 @@ lzma_alone_decoder_init(lzma_next_coder *next, lzma_allocator *allocator,
 
 	next->coder->sequence = SEQ_PROPERTIES;
 	next->coder->pos = 0;
-	next->coder->options.dictionary_size = 0;
+	next->coder->options.dict_size = 0;
 	next->coder->uncompressed_size = 0;
 	next->coder->memlimit = memlimit;
 
diff --git a/src/liblzma/common/alone_encoder.c b/src/liblzma/common/alone_encoder.c
index 7fb11570..41fb6162 100644
--- a/src/liblzma/common/alone_encoder.c
+++ b/src/liblzma/common/alone_encoder.c
@@ -106,9 +106,10 @@ alone_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
 	if (lzma_lzma_lclppb_encode(options, next->coder->header))
 		return LZMA_PROG_ERROR;
 
-	// - Dictionary size (4 bytes)
-	if (options->dictionary_size < LZMA_DICTIONARY_SIZE_MIN
-			|| options->dictionary_size > LZMA_DICTIONARY_SIZE_MAX)
+	// - Dictionary size (4 bytes); limit to 1 GiB since that's what
+	//   LZMA SDK currently does for encoding.
+	if (options->dict_size < LZMA_DICT_SIZE_MIN
+			|| options->dict_size > (UINT32_C(1) << 30))
 		return LZMA_PROG_ERROR;
 
 	// Round up to to the next 2^n or 2^n + 2^(n - 1) depending on which
@@ -118,7 +119,7 @@ alone_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
 	//
 	// FIXME Maybe LZMA_Alone needs some lower limit for maximum
 	// dictionary size? Must check decoders from old LZMA SDK version.
-	uint32_t d = options->dictionary_size - 1;
+	uint32_t d = options->dict_size - 1;
 	d |= d >> 2;
 	d |= d >> 3;
 	d |= d >> 4;
diff --git a/src/liblzma/common/chunk_size.c b/src/liblzma/common/chunk_size.c
index 74d4a6f4..33276b28 100644
--- a/src/liblzma/common/chunk_size.c
+++ b/src/liblzma/common/chunk_size.c
@@ -55,7 +55,7 @@ lzma_chunk_size(const lzma_options_filter *filters)
 			// splitting the data in smaller blocks.
 			break;
 
-		case LZMA_FILTER_LZMA:
+		case LZMA_FILTER_LZMA1:
 			// The block sizes of the possible next filters in
 			// the chain are irrelevant after the LZMA filter.
 			return ((lzma_options_lzma *)(filters->options))
diff --git a/src/liblzma/common/easy.c b/src/liblzma/common/easy.c
index 7446bc79..d5e19525 100644
--- a/src/liblzma/common/easy.c
+++ b/src/liblzma/common/easy.c
@@ -23,6 +23,9 @@
 struct lzma_coder_s {
 	lzma_next_coder stream_encoder;
 
+	/// Options for LZMA2
+	lzma_options_lzma opt_lzma;
+
 	/// We need to keep the filters array available in case
 	/// LZMA_FULL_FLUSH is used.
 	lzma_filter filters[5];
@@ -30,7 +33,7 @@ struct lzma_coder_s {
 
 
 static bool
-easy_set_filters(lzma_filter *filters, uint32_t level)
+easy_set_filters(lzma_coder *coder, uint32_t level)
 {
 	bool error = false;
 
@@ -40,9 +43,10 @@ easy_set_filters(lzma_filter *filters, uint32_t level)
 
 #ifdef HAVE_ENCODER_LZMA2
 	} else if (level <= 9) {
-		filters[0].id = LZMA_FILTER_LZMA2;
-		filters[0].options = (void *)(&lzma_preset_lzma[level - 1]);
-		filters[1].id = LZMA_VLI_UNKNOWN;
+		error = lzma_lzma_preset(&coder->opt_lzma, level - 1);
+		coder->filters[0].id = LZMA_FILTER_LZMA2;
+		coder->filters[0].options = &coder->opt_lzma;
+		coder->filters[1].id = LZMA_VLI_UNKNOWN;
 #endif
 
 	} else {
@@ -91,7 +95,7 @@ easy_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
 		next->coder->stream_encoder = LZMA_NEXT_CODER_INIT;
 	}
 
-	if (easy_set_filters(next->coder->filters, level))
+	if (easy_set_filters(next->coder, level))
 		return LZMA_OPTIONS_ERROR;
 
 	return lzma_stream_encoder_init(&next->coder->stream_encoder,
@@ -116,9 +120,9 @@ lzma_easy_encoder(lzma_stream *strm, lzma_easy_level level)
 extern LZMA_API uint64_t
 lzma_easy_memory_usage(lzma_easy_level level)
 {
-	lzma_filter filters[5];
-	if (easy_set_filters(filters, level))
+	lzma_coder coder;
+	if (easy_set_filters(&coder, level))
 		return UINT32_MAX;
 
-	return lzma_memusage_encoder(filters);
+	return lzma_memusage_encoder(coder.filters);
 }
diff --git a/src/liblzma/common/filter_common.c b/src/liblzma/common/filter_common.c
index 7097ce51..71ceeca0 100644
--- a/src/liblzma/common/filter_common.c
+++ b/src/liblzma/common/filter_common.c
@@ -38,9 +38,9 @@ static const struct {
 	bool changes_size;
 
 } features[] = {
-#if defined (HAVE_ENCODER_LZMA) || defined(HAVE_DECODER_LZMA)
+#if defined (HAVE_ENCODER_LZMA1) || defined(HAVE_DECODER_LZMA1)
 	{
-		.id = LZMA_FILTER_LZMA,
+		.id = LZMA_FILTER_LZMA1,
 		.non_last_ok = false,
 		.last_ok = true,
 		.changes_size = true,
diff --git a/src/liblzma/common/filter_decoder.c b/src/liblzma/common/filter_decoder.c
index 8b7e532f..241b272d 100644
--- a/src/liblzma/common/filter_decoder.c
+++ b/src/liblzma/common/filter_decoder.c
@@ -51,9 +51,9 @@ typedef struct {
 
 
 static const lzma_filter_decoder decoders[] = {
-#ifdef HAVE_DECODER_LZMA
+#ifdef HAVE_DECODER_LZMA1
 	{
-		.id = LZMA_FILTER_LZMA,
+		.id = LZMA_FILTER_LZMA1,
 		.init = &lzma_lzma_decoder_init,
 		.memusage = &lzma_lzma_decoder_memusage,
 		.props_decode = &lzma_lzma_props_decode,
diff --git a/src/liblzma/common/filter_encoder.c b/src/liblzma/common/filter_encoder.c
index 550d5483..a839fe70 100644
--- a/src/liblzma/common/filter_encoder.c
+++ b/src/liblzma/common/filter_encoder.c
@@ -62,9 +62,9 @@ typedef struct {
 
 
 static const lzma_filter_encoder encoders[] = {
-#ifdef HAVE_ENCODER_LZMA
+#ifdef HAVE_ENCODER_LZMA1
 	{
-		.id = LZMA_FILTER_LZMA,
+		.id = LZMA_FILTER_LZMA1,
 		.init = &lzma_lzma_encoder_init,
 		.memusage = &lzma_lzma_encoder_memusage,
 		.chunk_size = NULL, // FIXME
diff --git a/src/liblzma/common/init_encoder.c b/src/liblzma/common/init_encoder.c
index c5f12a91..1130e6b8 100644
--- a/src/liblzma/common/init_encoder.c
+++ b/src/liblzma/common/init_encoder.c
@@ -31,7 +31,7 @@ lzma_init_encoder(void)
 
 	lzma_init_check();
 
-#if defined(HAVE_SMALL) && defined(HAVE_ENCODER_LZMA)
+#if defined(HAVE_SMALL) && defined(HAVE_ENCODER_LZMA1)
 	lzma_rc_init();
 #endif
 
diff --git a/src/liblzma/delta/delta_common.c b/src/liblzma/delta/delta_common.c
index 86ef33be..90b5552b 100644
--- a/src/liblzma/delta/delta_common.c
+++ b/src/liblzma/delta/delta_common.c
@@ -50,17 +50,17 @@ lzma_delta_coder_init(lzma_next_coder *next, lzma_allocator *allocator,
 	// Set the delta distance.
 	if (filters[0].options == NULL)
 		return LZMA_PROG_ERROR;
-	next->coder->distance = ((lzma_options_delta *)(filters[0].options))
-			->distance;
-	if (next->coder->distance < LZMA_DELTA_DISTANCE_MIN
-			|| next->coder->distance > LZMA_DELTA_DISTANCE_MAX)
+	next->coder->distance
+			= ((lzma_options_delta *)(filters[0].options))->dist;
+	if (next->coder->distance < LZMA_DELTA_DIST_MIN
+			|| next->coder->distance > LZMA_DELTA_DIST_MAX)
 		return LZMA_OPTIONS_ERROR;
 
 	// Initialize the rest of the variables.
 	next->coder->pos = 0;
-	memzero(next->coder->history, LZMA_DELTA_DISTANCE_MAX);
+	memzero(next->coder->history, LZMA_DELTA_DIST_MAX);
 
 	// Initialize the next decoder in the chain, if any.
 	return lzma_next_filter_init(&next->coder->next,
-				allocator, filters + 1);
+			allocator, filters + 1);
 }
diff --git a/src/liblzma/delta/delta_common.h b/src/liblzma/delta/delta_common.h
index 1d58899d..e7b3eeda 100644
--- a/src/liblzma/delta/delta_common.h
+++ b/src/liblzma/delta/delta_common.h
@@ -33,7 +33,7 @@ struct lzma_coder_s {
 	uint8_t pos;
 
 	/// Buffer to hold history of the original data
-	uint8_t history[LZMA_DELTA_DISTANCE_MAX];
+	uint8_t history[LZMA_DELTA_DIST_MAX];
 };
 
 
diff --git a/src/liblzma/delta/delta_decoder.c b/src/liblzma/delta/delta_decoder.c
index 80ef173a..26dc40fe 100644
--- a/src/liblzma/delta/delta_decoder.c
+++ b/src/liblzma/delta/delta_decoder.c
@@ -74,7 +74,7 @@ lzma_delta_props_decode(void **options, lzma_allocator *allocator,
 		return LZMA_MEM_ERROR;
 
 	opt->type = LZMA_DELTA_TYPE_BYTE;
-	opt->distance = props[0] + 1;
+	opt->dist = props[0] + 1;
 
 	*options = opt;
 
diff --git a/src/liblzma/delta/delta_encoder.c b/src/liblzma/delta/delta_encoder.c
index 56afa90a..bb772a6c 100644
--- a/src/liblzma/delta/delta_encoder.c
+++ b/src/liblzma/delta/delta_encoder.c
@@ -109,11 +109,11 @@ lzma_delta_props_encode(const void *options, uint8_t *out)
 	// It's possible that newer liblzma versions will support larger
 	// distance values.
 	if (opt->type != LZMA_DELTA_TYPE_BYTE
-			|| opt->distance < LZMA_DELTA_DISTANCE_MIN
-			|| opt->distance > LZMA_DELTA_DISTANCE_MAX)
+			|| opt->dist < LZMA_DELTA_DIST_MIN
+			|| opt->dist > LZMA_DELTA_DIST_MAX)
 		return LZMA_OPTIONS_ERROR;
 
-	out[0] = opt->distance - LZMA_DELTA_DISTANCE_MIN;
+	out[0] = opt->dist - LZMA_DELTA_DIST_MIN;
 
 	return LZMA_OK;
 }
diff --git a/src/liblzma/lz/lz_encoder.c b/src/liblzma/lz/lz_encoder.c
index 159080ee..d598f71a 100644
--- a/src/liblzma/lz/lz_encoder.c
+++ b/src/liblzma/lz/lz_encoder.c
@@ -189,15 +189,13 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator,
 	// For now, the dictionary size is limited to 1.5 GiB. This may grow
 	// in the future if needed, but it needs a little more work than just
 	// changing this check.
-	if (lz_options->dictionary_size < LZMA_DICTIONARY_SIZE_MIN
-			|| lz_options->dictionary_size
+	if (lz_options->dict_size < LZMA_DICT_SIZE_MIN
+			|| lz_options->dict_size
 				> (UINT32_C(1) << 30) + (UINT32_C(1) << 29)
-			|| lz_options->find_len_max
-				> lz_options->match_len_max)
+			|| lz_options->nice_len > lz_options->match_len_max)
 		return true;
 
-	mf->keep_size_before = lz_options->before_size
-			+ lz_options->dictionary_size;
+	mf->keep_size_before = lz_options->before_size + lz_options->dict_size;
 
 	mf->keep_size_after = lz_options->after_size
 			+ lz_options->match_len_max;
@@ -213,7 +211,7 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator,
 	//     to size_t.
 	//   - Memory usage calculation needs something too, e.g. use uint64_t
 	//     for mf->size.
-	uint32_t reserve = lz_options->dictionary_size / 2;
+	uint32_t reserve = lz_options->dict_size / 2;
 	if (reserve > (UINT32_C(1) << 30))
 		reserve /= 2;
 
@@ -232,7 +230,7 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator,
 
 	// Match finder options
 	mf->match_len_max = lz_options->match_len_max;
-	mf->find_len_max = lz_options->find_len_max;
+	mf->nice_len = lz_options->nice_len;
 
 	// cyclic_size has to stay smaller than 2 Gi. Note that this doesn't
 	// mean limitting dictionary size to less than 2 GiB. With a match
@@ -249,7 +247,7 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator,
 	// memory to keep the code simpler. The current way is simple and
 	// still allows pretty big dictionaries, so I don't expect these
 	// limits to change.
-	mf->cyclic_size = lz_options->dictionary_size + 1;
+	mf->cyclic_size = lz_options->dict_size + 1;
 
 	// Validate the match finder ID and setup the function pointers.
 	switch (lz_options->match_finder) {
@@ -289,9 +287,9 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator,
 	}
 
 	// Calculate the sizes of mf->hash and mf->son and check that
-	// find_len_max is big enough for the selected match finder.
+	// nice_len is big enough for the selected match finder.
 	const uint32_t hash_bytes = lz_options->match_finder & 0x0F;
-	if (hash_bytes > mf->find_len_max)
+	if (hash_bytes > mf->nice_len)
 		return true;
 
 	const bool is_bt = (lz_options->match_finder & 0x10) != 0;
@@ -302,7 +300,7 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator,
 	} else {
 		// Round dictionary size up to the next 2^n - 1 so it can
 		// be used as a hash mask.
-		hs = lz_options->dictionary_size - 1;
+		hs = lz_options->dict_size - 1;
 		hs |= hs >> 1;
 		hs |= hs >> 2;
 		hs |= hs >> 4;
@@ -353,11 +351,11 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator,
 	}
 
 	// Maximum number of match finder cycles
-	mf->loops = lz_options->match_finder_cycles;
-	if (mf->loops == 0) {
-		mf->loops = 16 + (mf->find_len_max / 2);
+	mf->depth = lz_options->depth;
+	if (mf->depth == 0) {
+		mf->depth = 16 + (mf->nice_len / 2);
 		if (!is_bt)
-			mf->loops /= 2;
+			mf->depth /= 2;
 	}
 
 	return false;
diff --git a/src/liblzma/lz/lz_encoder.h b/src/liblzma/lz/lz_encoder.h
index 373cc01b..44880d77 100644
--- a/src/liblzma/lz/lz_encoder.h
+++ b/src/liblzma/lz/lz_encoder.h
@@ -110,13 +110,13 @@ struct lzma_mf_s {
 	uint32_t hash_mask;
 
 	/// Maximum number of loops in the match finder
-	uint32_t loops;
+	uint32_t depth;
 
 	/// Maximum length of a match that the match finder will try to find.
-	uint32_t find_len_max;
+	uint32_t nice_len;
 
 	/// Maximum length of a match supported by the LZ-based encoder.
-	/// If the longest match found by the match finder is find_len_max,
+	/// If the longest match found by the match finder is nice_len,
 	/// mf_find() tries to expand it up to match_len_max bytes.
 	uint32_t match_len_max;
 
@@ -139,40 +139,40 @@ typedef struct {
 	size_t before_size;
 
 	/// Size of the history buffer
-	size_t dictionary_size;
+	size_t dict_size;
 
 	/// Extra amount of data to keep available after the "actual"
 	/// dictionary.
 	size_t after_size;
 
 	/// Maximum length of a match that the LZ-based encoder can accept.
-	/// This is used to extend matches of length find_len_max to the
+	/// This is used to extend matches of length nice_len to the
 	/// maximum possible length.
 	size_t match_len_max;
 
 	/// Match finder will search matches of at maximum of this length.
 	/// This must be less than or equal to match_len_max.
-	size_t find_len_max;
+	size_t nice_len;
 
 	/// Type of the match finder to use
 	lzma_match_finder match_finder;
 
-	/// TODO: Comment
-	uint32_t match_finder_cycles;
+	/// Maximum search depth
+	uint32_t depth;
 
 	/// TODO: Comment
-	const uint8_t *preset_dictionary;
+	const uint8_t *preset_dict;
 
-	uint32_t preset_dictionary_size;
+	uint32_t preset_dict_size;
 
 } lzma_lz_options;
 
 
 // The total usable buffer space at any moment outside the match finder:
-// before_size + dictionary_size + after_size + match_len_max
+// before_size + dict_size + after_size + match_len_max
 //
 // In reality, there's some extra space allocated to prevent the number of
-// memmove() calls reasonable. The bigger the dictionary_size is, the bigger
+// memmove() calls reasonable. The bigger the dict_size is, the bigger
 // this extra buffer will be since with bigger dictionaries memmove() would
 // also take longer.
 //
@@ -181,7 +181,7 @@ typedef struct {
 // In other words, a single encoder loop may advance lzma_mf.read_pos at
 // maximum of after_size times. Since matches are looked up to
 // lzma_mf.buffer[lzma_mf.read_pos + match_len_max - 1], the total
-// amount of extra buffer needed after dictionary_size becomes
+// amount of extra buffer needed after dict_size becomes
 // after_size + match_len_max.
 //
 // before_size has two uses. The first one is to keep literals available
diff --git a/src/liblzma/lz/lz_encoder_mf.c b/src/liblzma/lz/lz_encoder_mf.c
index d82681b3..9d50e91d 100644
--- a/src/liblzma/lz/lz_encoder_mf.c
+++ b/src/liblzma/lz/lz_encoder_mf.c
@@ -42,7 +42,7 @@ lzma_mf_find(lzma_mf *mf, uint32_t *count_ptr, lzma_match *matches)
 #ifndef NDEBUG
 		// Validate the matches.
 		for (uint32_t i = 0; i < count; ++i) {
-			assert(matches[i].len <= mf->find_len_max);
+			assert(matches[i].len <= mf->nice_len);
 			assert(matches[i].dist < mf->read_pos);
 			assert(memcmp(mf_ptr(mf) - 1,
 				mf_ptr(mf) - matches[i].dist - 2,
@@ -56,7 +56,7 @@ lzma_mf_find(lzma_mf *mf, uint32_t *count_ptr, lzma_match *matches)
 
 		// If a match of maximum search length was found, try to
 		// extend the match to maximum possible length.
-		if (len_best == mf->find_len_max) {
+		if (len_best == mf->nice_len) {
 			// The limit for the match length is either the
 			// maximum match length supported by the LZ-based
 			// encoder or the number of bytes left in the
@@ -90,7 +90,7 @@ lzma_mf_find(lzma_mf *mf, uint32_t *count_ptr, lzma_match *matches)
 
 
 /// Hash value to indicate unused element in the hash. Since we start the
-/// positions from dictionary_size + 1, zero is always too far to qualify
+/// positions from dict_size + 1, zero is always too far to qualify
 /// as usable match position.
 #define EMPTY_HASH_VALUE 0
 
@@ -166,7 +166,7 @@ move_pos(lzma_mf *mf)
 }
 
 
-/// When flushing, we cannot run the match finder unless there is find_len_max
+/// When flushing, we cannot run the match finder unless there is nice_len
 /// bytes available in the dictionary. Instead, we skip running the match
 /// finder (indicating that no match was found), and count how many bytes we
 /// have ignored this way.
@@ -196,8 +196,8 @@ move_pending(lzma_mf *mf)
 /// in them.
 #define header(is_bt, len_min, ret_op) \
 	uint32_t len_limit = mf_avail(mf); \
-	if (mf->find_len_max <= len_limit) { \
-		len_limit = mf->find_len_max; \
+	if (mf->nice_len <= len_limit) { \
+		len_limit = mf->nice_len; \
 	} else if (len_limit < (len_min) \
 			|| (is_bt && mf->action == LZMA_SYNC_FLUSH)) { \
 		assert(mf->action != LZMA_RUN); \
@@ -226,7 +226,7 @@ move_pending(lzma_mf *mf)
 /// of matches found.
 #define call_find(func, len_best) \
 do { \
-	matches_count = func(len_limit, pos, cur, cur_match, mf->loops, \
+	matches_count = func(len_limit, pos, cur, cur_match, mf->depth, \
 				mf->son, mf->cyclic_pos, mf->cyclic_size, \
 				matches + matches_count, len_best) \
 			- matches; \
@@ -246,7 +246,7 @@ do { \
 /// \param      pos             lzma_mf.read_pos + lzma_mf.offset
 /// \param      cur             Pointer to current byte (mf_ptr(mf))
 /// \param      cur_match       Start position of the current match candidate
-/// \param      loops           Maximum length of the hash chain
+/// \param      depth           Maximum length of the hash chain
 /// \param      son             lzma_mf.son (contains the hash chain)
 /// \param      cyclic_pos
 /// \param      cyclic_size
@@ -258,7 +258,7 @@ hc_find_func(
 		const uint32_t pos,
 		const uint8_t *const cur,
 		uint32_t cur_match,
-		uint32_t loops,
+		uint32_t depth,
 		uint32_t *const son,
 		const uint32_t cyclic_pos,
 		const uint32_t cyclic_size,
@@ -269,7 +269,7 @@ hc_find_func(
 
 	while (true) {
 		const uint32_t delta = pos - cur_match;
-		if (loops-- == 0 || delta >= cyclic_size)
+		if (depth-- == 0 || delta >= cyclic_size)
 			return matches;
 
 		const uint8_t *const pb = cur - delta;
@@ -463,7 +463,7 @@ bt_find_func(
 		const uint32_t pos,
 		const uint8_t *const cur,
 		uint32_t cur_match,
-		uint32_t loops,
+		uint32_t depth,
 		uint32_t *const son,
 		const uint32_t cyclic_pos,
 		const uint32_t cyclic_size,
@@ -478,7 +478,7 @@ bt_find_func(
 
 	while (true) {
 		const uint32_t delta = pos - cur_match;
-		if (loops-- == 0 || delta >= cyclic_size) {
+		if (depth-- == 0 || delta >= cyclic_size) {
 			*ptr0 = EMPTY_HASH_VALUE;
 			*ptr1 = EMPTY_HASH_VALUE;
 			return matches;
@@ -531,7 +531,7 @@ bt_skip_func(
 		const uint32_t pos,
 		const uint8_t *const cur,
 		uint32_t cur_match,
-		uint32_t loops,
+		uint32_t depth,
 		uint32_t *const son,
 		const uint32_t cyclic_pos,
 		const uint32_t cyclic_size)
@@ -544,7 +544,7 @@ bt_skip_func(
 
 	while (true) {
 		const uint32_t delta = pos - cur_match;
-		if (loops-- == 0 || delta >= cyclic_size) {
+		if (depth-- == 0 || delta >= cyclic_size) {
 			*ptr0 = EMPTY_HASH_VALUE;
 			*ptr1 = EMPTY_HASH_VALUE;
 			return;
@@ -588,7 +588,7 @@ bt_skip_func(
 
 #define bt_skip() \
 do { \
-	bt_skip_func(len_limit, pos, cur, cur_match, mf->loops, \
+	bt_skip_func(len_limit, pos, cur, cur_match, mf->depth, \
 			mf->son, mf->cyclic_pos, \
 			mf->cyclic_size); \
 	move_pos(mf); \
diff --git a/src/liblzma/lzma/Makefile.am b/src/liblzma/lzma/Makefile.am
index bcc1fdc6..ec6b7b27 100644
--- a/src/liblzma/lzma/Makefile.am
+++ b/src/liblzma/lzma/Makefile.am
@@ -24,7 +24,7 @@ liblzma2_la_CPPFLAGS = \
 
 liblzma2_la_SOURCES = lzma_common.h
 
-if COND_ENCODER_LZMA
+if COND_ENCODER_LZMA1
 liblzma2_la_SOURCES += \
 	fastpos.h \
 	lzma_encoder.h \
@@ -39,7 +39,7 @@ liblzma2_la_SOURCES += fastpos_table.c
 endif
 endif
 
-if COND_DECODER_LZMA
+if COND_DECODER_LZMA1
 liblzma2_la_SOURCES += \
 	lzma_decoder.c \
 	lzma_decoder.h
diff --git a/src/liblzma/lzma/lzma2_decoder.c b/src/liblzma/lzma/lzma2_decoder.c
index 88e73fb6..af1da746 100644
--- a/src/liblzma/lzma/lzma2_decoder.c
+++ b/src/liblzma/lzma/lzma2_decoder.c
@@ -303,14 +303,14 @@ lzma_lzma2_props_decode(void **options, lzma_allocator *allocator,
 		return LZMA_MEM_ERROR;
 
 	if (props[0] == 40) {
-		opt->dictionary_size = UINT32_MAX;
+		opt->dict_size = UINT32_MAX;
 	} else {
-		opt->dictionary_size = 2 | (props[0] & 1);
-		opt->dictionary_size <<= props[0] / 2 + 11;
+		opt->dict_size = 2 | (props[0] & 1);
+		opt->dict_size <<= props[0] / 2 + 11;
 	}
 
-	opt->preset_dictionary = NULL;
-	opt->preset_dictionary_size = 0;
+	opt->preset_dict = NULL;
+	opt->preset_dict_size = 0;
 
 	*options = opt;
 
diff --git a/src/liblzma/lzma/lzma2_encoder.c b/src/liblzma/lzma/lzma2_encoder.c
index b2cd176b..757b871d 100644
--- a/src/liblzma/lzma/lzma2_encoder.c
+++ b/src/liblzma/lzma/lzma2_encoder.c
@@ -178,19 +178,13 @@ lzma2_encode(lzma_coder *restrict coder, lzma_mf *restrict mf,
 		// Look if there are new options. At least for now,
 		// only lc/lp/pb can be changed.
 		if (coder->opt_new != NULL
-				&& (coder->opt_cur.literal_context_bits
-					!= coder->opt_new->literal_context_bits
-				|| coder->opt_cur.literal_pos_bits
-					!= coder->opt_new->literal_pos_bits
-				|| coder->opt_cur.pos_bits
-					!= coder->opt_new->pos_bits)) {
+				&& (coder->opt_cur.lc != coder->opt_new->lc
+				|| coder->opt_cur.lp != coder->opt_new->lp
+				|| coder->opt_cur.pb != coder->opt_new->pb)) {
 			// Options have been changed, copy them to opt_cur.
-			coder->opt_cur.literal_context_bits
-					= coder->opt_new->literal_context_bits;
-			coder->opt_cur.literal_pos_bits
-					= coder->opt_new->literal_pos_bits;
-			coder->opt_cur.pos_bits
-					= coder->opt_new->pos_bits;
+			coder->opt_cur.lc = coder->opt_new->lc;
+			coder->opt_cur.lp = coder->opt_new->lp;
+			coder->opt_cur.pb = coder->opt_new->pb;
 
 			// We need to write the new options and reset
 			// the encoder state.
@@ -352,10 +346,9 @@ lzma2_encoder_init(lzma_lz_encoder *lz, lzma_allocator *allocator,
 	// compressed size of a chunk is not smaller than the uncompressed
 	// size, so we need to have at least LZMA2_COMPRESSED_MAX bytes
 	// history available.
-	if (lz_options->before_size + lz_options->dictionary_size
-			< LZMA2_CHUNK_MAX)
-		lz_options->before_size = LZMA2_CHUNK_MAX
-				- lz_options->dictionary_size;
+	if (lz_options->before_size + lz_options->dict_size < LZMA2_CHUNK_MAX)
+		lz_options->before_size
+				= LZMA2_CHUNK_MAX - lz_options->dict_size;
 
 	return LZMA_OK;
 }
@@ -385,7 +378,7 @@ extern lzma_ret
 lzma_lzma2_props_encode(const void *options, uint8_t *out)
 {
 	const lzma_options_lzma *const opt = options;
-	uint32_t d = MAX(opt->dictionary_size, LZMA_DICTIONARY_SIZE_MIN);
+	uint32_t d = MAX(opt->dict_size, LZMA_DICT_SIZE_MIN);
 
 	// Round up to to the next 2^n - 1 or 2^n + 2^(n - 1) - 1 depending
 	// on which one is the next:
diff --git a/src/liblzma/lzma/lzma_common.h b/src/liblzma/lzma/lzma_common.h
index 6909969b..546bf89e 100644
--- a/src/liblzma/lzma/lzma_common.h
+++ b/src/liblzma/lzma/lzma_common.h
@@ -32,20 +32,16 @@
 /// Maximum number of position states. A position state is the lowest pos bits
 /// number of bits of the current uncompressed offset. In some places there
 /// are different sets of probabilities for different pos states.
-#define POS_STATES_MAX (1 << LZMA_POS_BITS_MAX)
+#define POS_STATES_MAX (1 << LZMA_PB_MAX)
 
 
-/// Validates literal_context_bits, literal_pos_bits, and pos_bits.
+/// Validates lc, lp, and pb.
 static inline bool
 is_lclppb_valid(const lzma_options_lzma *options)
 {
-	return options->literal_context_bits <= LZMA_LITERAL_CONTEXT_BITS_MAX
-			&& options->literal_pos_bits
-				<= LZMA_LITERAL_POS_BITS_MAX
-			&& options->literal_context_bits
-					+ options->literal_pos_bits
-				<= LZMA_LITERAL_BITS_MAX
-			&& options->pos_bits <= LZMA_POS_BITS_MAX;
+	return options->lc <= LZMA_LCLP_MAX && options->lp <= LZMA_LCLP_MAX
+			&& options->lc + options->lp <= LZMA_LCLP_MAX
+			&& options->pb <= LZMA_PB_MAX;
 }
 
 
@@ -126,7 +122,7 @@ typedef enum {
 #define LITERAL_CODER_SIZE 0x300
 
 /// Maximum number of literal coders
-#define LITERAL_CODERS_MAX (1 << LZMA_LITERAL_BITS_MAX)
+#define LITERAL_CODERS_MAX (1 << LZMA_LCLP_MAX)
 
 /// Locate the literal coder for the next literal byte. The choice depends on
 ///   - the lowest literal_pos_bits bits of the position of the current
@@ -138,13 +134,11 @@ typedef enum {
 
 static inline void
 literal_init(probability (*probs)[LITERAL_CODER_SIZE],
-		uint32_t literal_context_bits, uint32_t literal_pos_bits)
+		uint32_t lc, uint32_t lp)
 {
-	assert(literal_context_bits + literal_pos_bits
-			<= LZMA_LITERAL_BITS_MAX);
+	assert(lc + lp <= LZMA_LCLP_MAX);
 
-	const uint32_t coders
-			= 1U << (literal_context_bits + literal_pos_bits);
+	const uint32_t coders = 1U << (lc + lp);
 
 	for (uint32_t i = 0; i < coders; ++i)
 		for (uint32_t j = 0; j < LITERAL_CODER_SIZE; ++j)
@@ -219,7 +213,7 @@ literal_init(probability (*probs)[LITERAL_CODER_SIZE],
 // fastpos.h to understand why).
 #define END_POS_MODEL_INDEX 14
 
-// Seven-bit distances use the full FIXME
+// Pos slots that indicate a distance <= 127.
 #define FULL_DISTANCES_BITS (END_POS_MODEL_INDEX / 2)
 #define FULL_DISTANCES (1 << FULL_DISTANCES_BITS)
 
diff --git a/src/liblzma/lzma/lzma_decoder.c b/src/liblzma/lzma/lzma_decoder.c
index 0fa62c66..df3371e2 100644
--- a/src/liblzma/lzma/lzma_decoder.c
+++ b/src/liblzma/lzma/lzma_decoder.c
@@ -231,7 +231,7 @@ struct lzma_coder_s {
 	uint32_t rep2;      ///< Distance of third latest match
 	uint32_t rep3;      ///< Distance of fourth latest match
 
-	uint32_t pos_mask; // (1U << pos_bits) - 1
+	uint32_t pos_mask; // (1U << pb) - 1
 	uint32_t literal_context_bits;
 	uint32_t literal_pos_mask;
 
@@ -866,14 +866,13 @@ lzma_decoder_reset(lzma_coder *coder, const void *opt)
 	// FIXME?
 
 	// Calculate pos_mask. We don't need pos_bits as is for anything.
-	coder->pos_mask = (1U << options->pos_bits) - 1;
+	coder->pos_mask = (1U << options->pb) - 1;
 
 	// Initialize the literal decoder.
-	literal_init(coder->literal, options->literal_context_bits,
-				options->literal_pos_bits);
+	literal_init(coder->literal, options->lc, options->lp);
 
-	coder->literal_context_bits = options->literal_context_bits;
-	coder->literal_pos_mask = (1 << options->literal_pos_bits) - 1;
+	coder->literal_context_bits = options->lc;
+	coder->literal_pos_mask = (1U << options->lp) - 1;
 
 	// State
 	coder->state = STATE_LIT_LIT;
@@ -881,7 +880,7 @@ lzma_decoder_reset(lzma_coder *coder, const void *opt)
 	coder->rep1 = 0;
 	coder->rep2 = 0;
 	coder->rep3 = 0;
-	coder->pos_mask = (1 << options->pos_bits) - 1;
+	coder->pos_mask = (1U << options->pb) - 1;
 
 	// Range decoder
 	rc_reset(coder->rc);
@@ -908,7 +907,7 @@ lzma_decoder_reset(lzma_coder *coder, const void *opt)
 	bittree_reset(coder->pos_align, ALIGN_BITS);
 
 	// Len decoders (also bit/bittree)
-	const uint32_t num_pos_states = 1 << options->pos_bits;
+	const uint32_t num_pos_states = 1U << options->pb;
 	bit_reset(coder->match_len_decoder.choice);
 	bit_reset(coder->match_len_decoder.choice2);
 	bit_reset(coder->rep_len_decoder.choice);
@@ -957,7 +956,7 @@ lzma_lzma_decoder_create(lzma_lz_decoder *lz, lzma_allocator *allocator,
 	// All dictionary sizes are OK here. LZ decoder will take care of
 	// the special cases.
 	const lzma_options_lzma *options = opt;
-	*dict_size = options->dictionary_size;
+	*dict_size = options->dict_size;
 
 	return LZMA_OK;
 }
@@ -1003,13 +1002,12 @@ lzma_lzma_lclppb_decode(lzma_options_lzma *options, uint8_t byte)
 		return true;
 
 	// See the file format specification to understand this.
-	options->pos_bits = byte / (9 * 5);
-	byte -= options->pos_bits * 9 * 5;
-	options->literal_pos_bits = byte / 9;
-	options->literal_context_bits = byte - options->literal_pos_bits * 9;
+	options->pb = byte / (9 * 5);
+	byte -= options->pb * 9 * 5;
+	options->lp = byte / 9;
+	options->lc = byte - options->lp * 9;
 
-	return options->literal_context_bits + options->literal_pos_bits
-			> LZMA_LITERAL_BITS_MAX;
+	return options->lc + options->lp > LZMA_LCLP_MAX;
 }
 
 
@@ -1017,8 +1015,7 @@ extern uint64_t
 lzma_lzma_decoder_memusage(const void *options)
 {
 	const lzma_options_lzma *const opt = options;
-	const uint64_t lz_memusage
-			= lzma_lz_decoder_memusage(opt->dictionary_size);
+	const uint64_t lz_memusage = lzma_lz_decoder_memusage(opt->dict_size);
 	if (lz_memusage == UINT64_MAX)
 		return UINT64_MAX;
 
@@ -1044,10 +1041,10 @@ lzma_lzma_props_decode(void **options, lzma_allocator *allocator,
 	// All dictionary sizes are accepted, including zero. LZ decoder
 	// will automatically use a dictionary at least a few KiB even if
 	// a smaller dictionary is requested.
-	opt->dictionary_size = integer_read_32(props + 1);
+	opt->dict_size = integer_read_32(props + 1);
 
-	opt->preset_dictionary = NULL;
-	opt->preset_dictionary_size = 0;
+	opt->preset_dict = NULL;
+	opt->preset_dict_size = 0;
 
 	*options = opt;
 
diff --git a/src/liblzma/lzma/lzma_encoder.c b/src/liblzma/lzma/lzma_encoder.c
index 02b7d19a..2f81bedc 100644
--- a/src/liblzma/lzma/lzma_encoder.c
+++ b/src/liblzma/lzma/lzma_encoder.c
@@ -428,14 +428,14 @@ set_lz_options(lzma_lz_options *lz_options, const lzma_options_lzma *options)
 	// LZ encoder initialization does the validation, also when just
 	// calculating memory usage, so we don't need to validate here.
 	lz_options->before_size = OPTS;
-	lz_options->dictionary_size = options->dictionary_size;
+	lz_options->dict_size = options->dict_size;
 	lz_options->after_size = LOOP_INPUT_MAX;
 	lz_options->match_len_max = MATCH_LEN_MAX;
-	lz_options->find_len_max = options->fast_bytes;
-	lz_options->match_finder = options->match_finder;
-	lz_options->match_finder_cycles = options->match_finder_cycles;
-	lz_options->preset_dictionary = options->preset_dictionary;
-	lz_options->preset_dictionary_size = options->preset_dictionary_size;
+	lz_options->nice_len = options->nice_len;
+	lz_options->match_finder = options->mf;
+	lz_options->depth = options->depth;
+	lz_options->preset_dict = options->preset_dict;
+	lz_options->preset_dict_size = options->preset_dict_size;
 }
 
 
@@ -467,9 +467,9 @@ lzma_lzma_encoder_reset(lzma_coder *coder, const lzma_options_lzma *options)
 {
 	assert(!coder->is_flushed);
 
-	coder->pos_mask = (1U << options->pos_bits) - 1;
-	coder->literal_context_bits = options->literal_context_bits;
-	coder->literal_pos_mask = (1U << options->literal_pos_bits) - 1;
+	coder->pos_mask = (1U << options->pb) - 1;
+	coder->literal_context_bits = options->lc;
+	coder->literal_pos_mask = (1U << options->lp) - 1;
 
 	// Range coder
 	rc_reset(&coder->rc);
@@ -479,8 +479,7 @@ lzma_lzma_encoder_reset(lzma_coder *coder, const lzma_options_lzma *options)
 	for (size_t i = 0; i < REP_DISTANCES; ++i)
 		coder->reps[i] = 0;
 
-	literal_init(coder->literal, options->literal_context_bits,
-			options->literal_pos_bits);
+	literal_init(coder->literal, options->lc, options->lp);
 
 	// Bit encoders
 	for (size_t i = 0; i < STATES; ++i) {
@@ -506,10 +505,10 @@ lzma_lzma_encoder_reset(lzma_coder *coder, const lzma_options_lzma *options)
 
 	// Length encoders
 	length_encoder_reset(&coder->match_len_encoder,
-			1U << options->pos_bits, coder->fast_mode);
+			1U << options->pb, coder->fast_mode);
 
 	length_encoder_reset(&coder->rep_len_encoder,
-			1U << options->pos_bits, coder->fast_mode);
+			1U << options->pb, coder->fast_mode);
 
 	// Price counts are incremented every time appropriate probabilities
 	// are changed. price counts are set to zero when the price tables
@@ -546,8 +545,8 @@ lzma_lzma_encoder_create(lzma_coder **coder_ptr, lzma_allocator *allocator,
 
 	// Validate some of the options. LZ encoder validates fast_bytes too
 	// but we need a valid value here earlier.
-	if (!is_lclppb_valid(options) || options->fast_bytes < MATCH_LEN_MIN
-			|| options->fast_bytes > MATCH_LEN_MAX)
+	if (!is_lclppb_valid(options) || options->nice_len < MATCH_LEN_MIN
+			|| options->nice_len > MATCH_LEN_MAX)
 		return LZMA_OPTIONS_ERROR;
 
 	// Set compression mode.
@@ -562,17 +561,16 @@ lzma_lzma_encoder_create(lzma_coder **coder_ptr, lzma_allocator *allocator,
 			// Set dist_table_size.
 			// Round the dictionary size up to next 2^n.
 			uint32_t log_size = 0;
-			while ((UINT32_C(1) << log_size)
-					< options->dictionary_size)
+			while ((UINT32_C(1) << log_size) < options->dict_size)
 				++log_size;
 
 			coder->dist_table_size = log_size * 2;
 
 			// Length encoders' price table size
 			coder->match_len_encoder.table_size
-				= options->fast_bytes + 1 - MATCH_LEN_MIN;
+				= options->nice_len + 1 - MATCH_LEN_MIN;
 			coder->rep_len_encoder.table_size
-				= options->fast_bytes + 1 - MATCH_LEN_MIN;
+				= options->nice_len + 1 - MATCH_LEN_MIN;
 			break;
 		}
 
@@ -627,24 +625,17 @@ lzma_lzma_encoder_memusage(const void *options)
 extern bool
 lzma_lzma_lclppb_encode(const lzma_options_lzma *options, uint8_t *byte)
 {
-	if (options->literal_context_bits > LZMA_LITERAL_CONTEXT_BITS_MAX
-			|| options->literal_pos_bits
-				> LZMA_LITERAL_POS_BITS_MAX
-			|| options->pos_bits > LZMA_POS_BITS_MAX
-			|| options->literal_context_bits
-					+ options->literal_pos_bits
-				> LZMA_LITERAL_BITS_MAX)
+	if (!is_lclppb_valid(options))
 		return true;
 
-	*byte = (options->pos_bits * 5 + options->literal_pos_bits) * 9
-			+ options->literal_context_bits;
+	*byte = (options->pb * 5 + options->lp) * 9 + options->lc;
 	assert(*byte <= (4 * 5 + 4) * 9 + 8);
 
 	return false;
 }
 
 
-#ifdef HAVE_ENCODER_LZMA
+#ifdef HAVE_ENCODER_LZMA1
 extern lzma_ret
 lzma_lzma_props_encode(const void *options, uint8_t *out)
 {
@@ -653,7 +644,7 @@ lzma_lzma_props_encode(const void *options, uint8_t *out)
 	if (lzma_lzma_lclppb_encode(opt, out))
 		return LZMA_PROG_ERROR;
 
-	integer_write_32(out + 1, opt->dictionary_size);
+	integer_write_32(out + 1, opt->dict_size);
 
 	return LZMA_OK;
 }
diff --git a/src/liblzma/lzma/lzma_encoder_optimum_fast.c b/src/liblzma/lzma/lzma_encoder_optimum_fast.c
index 9da7e79e..4e8e26a2 100644
--- a/src/liblzma/lzma/lzma_encoder_optimum_fast.c
+++ b/src/liblzma/lzma/lzma_encoder_optimum_fast.c
@@ -38,7 +38,7 @@ extern void
 lzma_lzma_optimum_fast(lzma_coder *restrict coder, lzma_mf *restrict mf,
 		uint32_t *restrict back_res, uint32_t *restrict len_res)
 {
-	const uint32_t fast_bytes = mf->find_len_max;
+	const uint32_t nice_len = mf->nice_len;
 
 	uint32_t len_main;
 	uint32_t matches_count;
@@ -79,8 +79,8 @@ lzma_lzma_optimum_fast(lzma_coder *restrict coder, lzma_mf *restrict mf,
 				&& buf[len] == buf_back[len]; ++len) ;
 
 		// If we have found a repeated match that is at least
-		// fast_bytes long, return it immediatelly.
-		if (len >= fast_bytes) {
+		// nice_len long, return it immediatelly.
+		if (len >= nice_len) {
 			*back_res = i;
 			*len_res = len;
 			mf_skip(mf, len - 1);
@@ -94,8 +94,8 @@ lzma_lzma_optimum_fast(lzma_coder *restrict coder, lzma_mf *restrict mf,
 	}
 
 	// We didn't find a long enough repeated match. Encode it as a normal
-	// match if the match length is at least fast_bytes.
-	if (len_main >= fast_bytes) {
+	// match if the match length is at least nice_len.
+	if (len_main >= nice_len) {
 		*back_res = coder->matches[matches_count - 1].dist
 				+ REP_DISTANCES;
 		*len_res = len_main;
diff --git a/src/liblzma/lzma/lzma_encoder_optimum_normal.c b/src/liblzma/lzma/lzma_encoder_optimum_normal.c
index f0dd92c9..7071a433 100644
--- a/src/liblzma/lzma/lzma_encoder_optimum_normal.c
+++ b/src/liblzma/lzma/lzma_encoder_optimum_normal.c
@@ -281,7 +281,7 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf,
 		uint32_t *restrict back_res, uint32_t *restrict len_res,
 		uint32_t position)
 {
-	const uint32_t fast_bytes = mf->find_len_max;
+	const uint32_t nice_len = mf->nice_len;
 
 	uint32_t len_main;
 	uint32_t matches_count;
@@ -324,7 +324,7 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf,
 			rep_max_index = i;
 	}
 
-	if (rep_lens[rep_max_index] >= fast_bytes) {
+	if (rep_lens[rep_max_index] >= nice_len) {
 		*back_res = rep_max_index;
 		*len_res = rep_lens[rep_max_index];
 		mf_skip(mf, *len_res - 1);
@@ -332,7 +332,7 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf,
 	}
 
 
-	if (len_main >= fast_bytes) {
+	if (len_main >= nice_len) {
 		*back_res = coder->matches[matches_count - 1].dist
 				+ REP_DISTANCES;
 		*len_res = len_main;
@@ -457,7 +457,7 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf,
 static inline uint32_t
 helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf,
 		uint32_t len_end, uint32_t position, const uint32_t cur,
-		const uint32_t fast_bytes, const uint32_t buf_avail_full)
+		const uint32_t nice_len, const uint32_t buf_avail_full)
 {
 	uint32_t matches_count = coder->matches_count;
 	uint32_t new_len = coder->longest_match_length;
@@ -572,12 +572,12 @@ helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf,
 	if (buf_avail_full < 2)
 		return len_end;
 
-	const uint32_t buf_avail = MIN(buf_avail_full, fast_bytes);
+	const uint32_t buf_avail = MIN(buf_avail_full, nice_len);
 
 	if (!next_is_literal && match_byte != current_byte) { // speed optimization
 		// try literal + rep0
 		const uint8_t *const buf_back = buf - reps[0] - 1;
-		const uint32_t limit = MIN(buf_avail_full, fast_bytes + 1);
+		const uint32_t limit = MIN(buf_avail_full, nice_len + 1);
 
 		uint32_t len_test = 1;
 		while (len_test < limit && buf[len_test] == buf_back[len_test])
@@ -656,7 +656,7 @@ helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf,
 
 		uint32_t len_test_2 = len_test + 1;
 		const uint32_t limit = MIN(buf_avail_full,
-				len_test_2 + fast_bytes);
+				len_test_2 + nice_len);
 		for (; len_test_2 < limit
 				&& buf[len_test_2] == buf_back[len_test_2];
 				++len_test_2) ;
@@ -751,7 +751,7 @@ helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf,
 				const uint8_t *const buf_back = buf - cur_back - 1;
 				uint32_t len_test_2 = len_test + 1;
 				const uint32_t limit = MIN(buf_avail_full,
-						len_test_2 + fast_bytes);
+						len_test_2 + nice_len);
 
 				for (; len_test_2 < limit &&
 						buf[len_test_2] == buf_back[len_test_2];
@@ -862,11 +862,11 @@ lzma_lzma_optimum_normal(lzma_coder *restrict coder, lzma_mf *restrict mf,
 		coder->longest_match_length = mf_find(
 				mf, &coder->matches_count, coder->matches);
 
-		if (coder->longest_match_length >= mf->find_len_max)
+		if (coder->longest_match_length >= mf->nice_len)
 			break;
 
 		len_end = helper2(coder, reps, mf_ptr(mf) - 1, len_end,
-				position + cur, cur, mf->find_len_max,
+				position + cur, cur, mf->nice_len,
 				MIN(mf_avail(mf) + 1, OPTS - 1 - cur));
 	}
 
diff --git a/src/liblzma/lzma/lzma_encoder_presets.c b/src/liblzma/lzma/lzma_encoder_presets.c
index 08f339e9..7ef3509e 100644
--- a/src/liblzma/lzma/lzma_encoder_presets.c
+++ b/src/liblzma/lzma/lzma_encoder_presets.c
@@ -20,10 +20,11 @@
 #include "common.h"
 
 
+/*
 #define pow2(e) (UINT32_C(1) << (e))
 
 
-LZMA_API const lzma_options_lzma lzma_preset_lzma[9] = {
+static const lzma_options_lzma presets[9] = {
 // dict           lc lp pb           mode              fb   mf          mfc
 { pow2(16), NULL, 0, 3, 0, 2, false, LZMA_MODE_FAST,    64, LZMA_MF_HC3, 0, 0, 0, 0, 0, NULL, NULL },
 { pow2(20), NULL, 0, 3, 0, 0, false, LZMA_MODE_FAST,    64, LZMA_MF_HC4, 0, 0, 0, 0, 0, NULL, NULL },
@@ -37,30 +38,43 @@ LZMA_API const lzma_options_lzma lzma_preset_lzma[9] = {
 };
 
 
-/*
 extern LZMA_API lzma_bool
-lzma_preset_lzma(lzma_options_lzma *options, uint32_t level)
+lzma_lzma_preset(lzma_options_lzma *options, uint32_t level)
 {
-	*options = (lzma_options_lzma){
+	if (level >= ARRAY_SIZE(presetes))
+		return true;
 
-	};
-
-	options->literal_context_bits = LZMA_LITERAL_CONTEXT_BITS_DEFAULT
-	options->literal_pos_bits = LZMA_LITERAL_POS_BITS_DEFAULT;
-	options->pos_bits = LZMA_POS_BITS_DEFAULT;
-	options->preset_dictionary = NULL;
-	options->preset_dictionary_size = 0;
-	options->persistent = false;
-
-	options->mode = level <= 2 ? LZMA_MODE_FAST : LZMA_MODE_NORMAL;
-	options->fast_bytes = level <=
-
-	options->match_finder = level == 1 ? LZMA_MF_HC3
-			: (level == 2 ? LZMA_MF_HC4 : LZMA_MF_BT4);
-	options->match_finder_cycles = 0;
-
-
-
-	options->dictionary_size =
+	*options = presets[level];
+	return false;
 }
 */
+
+
+extern LZMA_API lzma_bool
+lzma_lzma_preset(lzma_options_lzma *options, uint32_t level)
+{
+	if (level >= 9)
+		return true;
+
+	memzero(options, sizeof(*options));
+
+	static const uint8_t shift[9] = { 16, 20, 19, 20, 21, 22, 23, 24, 25 };
+	options->dict_size = UINT32_C(1) << shift[level];
+
+	options->preset_dict = NULL;
+	options->preset_dict_size = 0;
+
+	options->lc = LZMA_LC_DEFAULT;
+	options->lp = LZMA_LP_DEFAULT;
+	options->pb = LZMA_PB_DEFAULT;
+
+	options->persistent = false;
+	options->mode = level <= 2 ? LZMA_MODE_FAST : LZMA_MODE_NORMAL;
+
+	options->nice_len = level <= 5 ? 32 : 64;
+	options->mf = level <= 1 ? LZMA_MF_HC3 : level <= 2 ? LZMA_MF_HC4
+			: LZMA_MF_BT4;
+	options->depth = 0;
+
+	return false;
+}
diff --git a/src/liblzma/rangecoder/Makefile.am b/src/liblzma/rangecoder/Makefile.am
index f6824292..b2e62d4a 100644
--- a/src/liblzma/rangecoder/Makefile.am
+++ b/src/liblzma/rangecoder/Makefile.am
@@ -21,7 +21,7 @@ librangecoder_la_CPPFLAGS = \
 	-I@top_srcdir@/src/liblzma/api \
 	-I@top_srcdir@/src/liblzma/common
 
-if COND_ENCODER_LZMA
+if COND_ENCODER_LZMA1
 librangecoder_la_SOURCES += \
 	range_encoder.h \
 	price.h
@@ -32,6 +32,6 @@ librangecoder_la_SOURCES += price_table.c
 endif
 endif
 
-if COND_DECODER_LZMA
+if COND_DECODER_LZMA1
 librangecoder_la_SOURCES += range_decoder.h
 endif
diff --git a/src/liblzma/subblock/subblock_decoder.c b/src/liblzma/subblock/subblock_decoder.c
index 41dbe389..7cf06988 100644
--- a/src/liblzma/subblock/subblock_decoder.c
+++ b/src/liblzma/subblock/subblock_decoder.c
@@ -291,7 +291,7 @@ decode_buffer(lzma_coder *coder, lzma_allocator *allocator,
 
 		// Optimization: We know that LZMA uses End of Payload Marker
 		// (not End of Input), so we can omit the helper filter.
-		if (filters[0].id == LZMA_FILTER_LZMA)
+		if (filters[0].id == LZMA_FILTER_LZMA1)
 			filters[1].id = LZMA_VLI_UNKNOWN;
 
 		return_if_error(lzma_raw_decoder_init(
diff --git a/src/lzma/args.c b/src/lzma/args.c
index 2ddb93ed..ddaa0f91 100644
--- a/src/lzma/args.c
+++ b/src/lzma/args.c
@@ -124,7 +124,7 @@ static const struct option long_opts[] = {
 static void
 add_filter(lzma_vli id, const char *opt_str)
 {
-	if (filter_count == 7) {
+	if (filter_count == LZMA_BLOCK_FILTERS_MAX) {
 		errmsg(V_ERROR, _("Maximum number of filters is seven"));
 		my_exit(ERROR);
 	}
@@ -142,7 +142,7 @@ add_filter(lzma_vli id, const char *opt_str)
 				= parse_options_delta(opt_str);
 		break;
 
-	case LZMA_FILTER_LZMA:
+	case LZMA_FILTER_LZMA1:
 	case LZMA_FILTER_LZMA2:
 		opt_filters[filter_count].options
 				= parse_options_lzma(opt_str);
@@ -301,7 +301,7 @@ parse_real(int argc, char **argv)
 			break;
 
 		case OPT_LZMA1:
-			add_filter(LZMA_FILTER_LZMA, optarg);
+			add_filter(LZMA_FILTER_LZMA1, optarg);
 			break;
 
 		case OPT_LZMA2:
@@ -452,11 +452,17 @@ parse_environment(void)
 static void
 set_compression_settings(void)
 {
+	static lzma_options_lzma opt_lzma;
+
 	if (filter_count == 0) {
+		if (lzma_lzma_preset(&opt_lzma, preset_number)) {
+			errmsg(V_ERROR, _("Internal error (bug)"));
+			my_exit(ERROR);
+		}
+
 		opt_filters[0].id = opt_header == HEADER_ALONE
-				? LZMA_FILTER_LZMA : LZMA_FILTER_LZMA2;
-		opt_filters[0].options = (lzma_options_lzma *)(
-				lzma_preset_lzma + preset_number);
+				? LZMA_FILTER_LZMA1 : LZMA_FILTER_LZMA2;
+		opt_filters[0].options = &opt_lzma;
 		filter_count = 1;
 	}
 
@@ -466,12 +472,14 @@ set_compression_settings(void)
 	// If we are using the LZMA_Alone format, allow exactly one filter
 	// which has to be LZMA.
 	if (opt_header == HEADER_ALONE && (filter_count != 1
-			|| opt_filters[0].id != LZMA_FILTER_LZMA)) {
-		errmsg(V_ERROR, _("With --format=alone only the LZMA filter "
+			|| opt_filters[0].id != LZMA_FILTER_LZMA1)) {
+		errmsg(V_ERROR, _("With --format=alone only the LZMA1 filter "
 				"is supported"));
 		my_exit(ERROR);
 	}
 
+	// TODO: liblzma probably needs an API to validate the filter chain.
+
 	// If using --format=raw, we can be decoding.
 	uint64_t memory_usage = opt_mode == MODE_COMPRESS
 			? lzma_memusage_encoder(opt_filters)
@@ -488,10 +496,11 @@ set_compression_settings(void)
 				my_exit(ERROR);
 			}
 
-			--preset_number;
-			opt_filters[0].options = (lzma_options_lzma *)(
-					lzma_preset_lzma
-					+ preset_number);
+			if (lzma_lzma_preset(&opt_lzma, --preset_number)) {
+				errmsg(V_ERROR, _("Internal error (bug)"));
+				my_exit(ERROR);
+			}
+
 			memory_usage = lzma_memusage_encoder(opt_filters);
 		}
 	} else {
diff --git a/src/lzma/help.c b/src/lzma/help.c
index d4888653..0b530ff5 100644
--- a/src/lzma/help.c
+++ b/src/lzma/help.c
@@ -82,13 +82,13 @@ show_help(void)
 "  --lzma1=[OPTS]      LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
 "  --lzma2=[OPTS]      more of the following options (valid values; default):\n"
 "                        dict=NUM   dictionary size in bytes (1 - 1GiB; 8MiB)\n"
-"                        lc=NUM     number of literal context bits (0-8; 3)\n"
+"                        lc=NUM     number of literal context bits (0-4; 3)\n"
 "                        lp=NUM     number of literal position bits (0-4; 0)\n"
 "                        pb=NUM     number of position bits (0-4; 2)\n"
 "                        mode=MODE  compression mode (`fast' or `best'; `best')\n"
-"                        fb=NUM     number of fast bytes (5-273; 128)\n"
+"                        nice=NUM   nice length of a match (2-273; 64)\n"
 "                        mf=NAME    match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n"
-"                        mfc=NUM    match finder cycles; 0=automatic (default)\n"
+"                        depth=NUM  maximum search depth; 0=automatic (default)\n"
 "\n"
 "  --x86               x86 filter (sometimes called BCJ filter)\n"
 "  --powerpc           PowerPC (big endian) filter\n"
@@ -98,14 +98,13 @@ show_help(void)
 "  --sparc             SPARC filter\n"
 "\n"
 "  --delta=[OPTS]      Delta filter; valid OPTS (valid values; default):\n"
-"                        distance=NUM  Distance between bytes being\n"
-"                                      subtracted from each other (1-256; 1)\n"
+"                        dist=NUM   distance between bytes being subtracted\n"
+"                                   from each other (1-256; 1)\n"
 "\n"
-"  --copy              No filtering (useful only when specified alone)\n"
 "  --subblock=[OPTS]   Subblock filter; valid OPTS (valid values; default):\n"
-"                        size=NUM    number of bytes of data per subblock\n"
-"                                    (1 - 256Mi; 4Ki)\n"
-"                        rle=NUM     run-length encoder chunk size (0-256; 0)\n"
+"                        size=NUM   number of bytes of data per subblock\n"
+"                                   (1 - 256Mi; 4Ki)\n"
+"                        rle=NUM    run-length encoder chunk size (0-256; 0)\n"
 ));
 
 	puts(_(
diff --git a/src/lzma/options.c b/src/lzma/options.c
index b2ec200e..f5ebdd8e 100644
--- a/src/lzma/options.c
+++ b/src/lzma/options.c
@@ -81,8 +81,7 @@ parse_options(const char *str, const option_map *opts,
 
 		if (value == NULL || value[0] == '\0') {
 			errmsg(V_ERROR, _("%s: Options must be `name=value' "
-					"pairs separated with commas"),
-					str);
+					"pairs separated with commas"), str);
 			my_exit(ERROR);
 		}
 
@@ -201,7 +200,7 @@ parse_options_subblock(const char *str)
 ///////////
 
 enum {
-	OPT_DISTANCE,
+	OPT_DIST,
 };
 
 
@@ -210,8 +209,8 @@ set_delta(void *options, uint32_t key, uint64_t value)
 {
 	lzma_options_delta *opt = options;
 	switch (key) {
-	case OPT_DISTANCE:
-		opt->distance = value;
+	case OPT_DIST:
+		opt->dist = value;
 		break;
 	}
 }
@@ -221,15 +220,16 @@ extern lzma_options_delta *
 parse_options_delta(const char *str)
 {
 	static const option_map opts[] = {
-		{ "distance", NULL,  LZMA_DELTA_DISTANCE_MIN,
-		                     LZMA_DELTA_DISTANCE_MAX },
+		{ "dist",     NULL,  LZMA_DELTA_DIST_MIN,
+		                     LZMA_DELTA_DIST_MAX },
 		{ NULL,       NULL,  0, 0 }
 	};
 
 	lzma_options_delta *options = xmalloc(sizeof(lzma_options_subblock));
 	*options = (lzma_options_delta){
 		// It's hard to give a useful default for this.
-		.distance = LZMA_DELTA_DISTANCE_MIN,
+		.type = LZMA_DELTA_TYPE_BYTE,
+		.dist = LZMA_DELTA_DIST_MIN,
 	};
 
 	parse_options(str, opts, &set_delta, options);
@@ -248,9 +248,9 @@ enum {
 	OPT_LP,
 	OPT_PB,
 	OPT_MODE,
-	OPT_FB,
+	OPT_NICE,
 	OPT_MF,
-	OPT_MC
+	OPT_DEPTH,
 };
 
 
@@ -261,35 +261,35 @@ set_lzma(void *options, uint32_t key, uint64_t value)
 
 	switch (key) {
 	case OPT_DICT:
-		opt->dictionary_size = value;
+		opt->dict_size = value;
 		break;
 
 	case OPT_LC:
-		opt->literal_context_bits = value;
+		opt->lc = value;
 		break;
 
 	case OPT_LP:
-		opt->literal_pos_bits = value;
+		opt->lp = value;
 		break;
 
 	case OPT_PB:
-		opt->pos_bits = value;
+		opt->pb = value;
 		break;
 
 	case OPT_MODE:
 		opt->mode = value;
 		break;
 
-	case OPT_FB:
-		opt->fast_bytes = value;
+	case OPT_NICE:
+		opt->nice_len = value;
 		break;
 
 	case OPT_MF:
-		opt->match_finder = value;
+		opt->mf = value;
 		break;
 
-	case OPT_MC:
-		opt->match_finder_cycles = value;
+	case OPT_DEPTH:
+		opt->depth = value;
 		break;
 	}
 }
@@ -314,35 +314,49 @@ parse_options_lzma(const char *str)
 	};
 
 	static const option_map opts[] = {
-		{ "dict", NULL,   LZMA_DICTIONARY_SIZE_MIN,
-				LZMA_DICTIONARY_SIZE_MAX },
-		{ "lc",   NULL,   LZMA_LITERAL_CONTEXT_BITS_MIN,
-				LZMA_LITERAL_CONTEXT_BITS_MAX },
-		{ "lp",   NULL,   LZMA_LITERAL_POS_BITS_MIN,
-				LZMA_LITERAL_POS_BITS_MAX },
-		{ "pb",   NULL,   LZMA_POS_BITS_MIN, LZMA_POS_BITS_MAX },
-		{ "mode", modes,  0, 0 },
-		{ "fb",   NULL,   LZMA_FAST_BYTES_MIN, LZMA_FAST_BYTES_MAX },
-		{ "mf",   mfs,    0, 0 },
-		{ "mc",   NULL,   0, UINT32_MAX },
-		{ NULL,   NULL,   0, 0 }
+		{ "dict",   NULL,   LZMA_DICT_SIZE_MIN,
+				(UINT32_C(1) << 30) + (UINT32_C(1) << 29) },
+		{ "lc",     NULL,   LZMA_LCLP_MIN, LZMA_LCLP_MAX },
+		{ "lp",     NULL,   LZMA_LCLP_MIN, LZMA_LCLP_MAX },
+		{ "pb",     NULL,   LZMA_PB_MIN, LZMA_PB_MAX },
+		{ "mode",   modes,  0, 0 },
+		{ "nice",   NULL,   2, 273 },
+		{ "mf",     mfs,    0, 0 },
+		{ "depth",  NULL,   0, UINT32_MAX },
+		{ NULL,     NULL,   0, 0 }
 	};
 
+	// TODO There should be a way to take some preset as the base for
+	// custom settings.
 	lzma_options_lzma *options = xmalloc(sizeof(lzma_options_lzma));
 	*options = (lzma_options_lzma){
-		.dictionary_size = LZMA_DICTIONARY_SIZE_DEFAULT,
-		.literal_context_bits = LZMA_LITERAL_CONTEXT_BITS_DEFAULT,
-		.literal_pos_bits = LZMA_LITERAL_POS_BITS_DEFAULT,
-		.pos_bits = LZMA_POS_BITS_DEFAULT,
-		.preset_dictionary =  NULL,
+		.dict_size = LZMA_DICT_SIZE_DEFAULT,
+		.preset_dict =  NULL,
+		.preset_dict_size = 0,
+		.lc = LZMA_LC_DEFAULT,
+		.lp = LZMA_LP_DEFAULT,
+		.pb = LZMA_PB_DEFAULT,
 		.persistent = false,
 		.mode = LZMA_MODE_NORMAL,
-		.fast_bytes = LZMA_FAST_BYTES_DEFAULT,
-		.match_finder = LZMA_MF_BT4,
-		.match_finder_cycles = 0,
+		.nice_len = 64,
+		.mf = LZMA_MF_BT4,
+		.depth = 0,
 	};
 
 	parse_options(str, opts, &set_lzma, options);
 
+	if (options->lc + options->lp > LZMA_LCLP_MAX) {
+		errmsg(V_ERROR, "The sum of lc and lp must be at "
+				"maximum of 4");
+		exit(ERROR);
+	}
+
+	const uint32_t nice_len_min = options->mf & 0x0F;
+	if (options->nice_len < nice_len_min) {
+		errmsg(V_ERROR, "The selected match finder requires at "
+				"least nice=%" PRIu32, nice_len_min);
+		exit(ERROR);
+	}
+
 	return options;
 }
diff --git a/tests/test_block_header.c b/tests/test_block_header.c
index 1d8e9d39..7f94d837 100644
--- a/tests/test_block_header.c
+++ b/tests/test_block_header.c
@@ -24,6 +24,8 @@ static uint8_t buf[LZMA_BLOCK_HEADER_SIZE_MAX];
 static lzma_block known_options;
 static lzma_block decoded_options;
 
+static lzma_options_lzma opt_lzma;
+
 static lzma_filter filters_none[1] = {
 	{
 		.id = LZMA_VLI_UNKNOWN,
@@ -34,7 +36,7 @@ static lzma_filter filters_none[1] = {
 static lzma_filter filters_one[2] = {
 	{
 		.id = LZMA_FILTER_LZMA2,
-		.options = (void *)(&lzma_preset_lzma[0]),
+		.options = &opt_lzma,
 	}, {
 		.id = LZMA_VLI_UNKNOWN,
 	}
@@ -53,7 +55,7 @@ static lzma_filter filters_four[5] = {
 		.options = NULL,
 	}, {
 		.id = LZMA_FILTER_LZMA2,
-		.options = (void *)(&lzma_preset_lzma[0]),
+		.options = &opt_lzma,
 	}, {
 		.id = LZMA_VLI_UNKNOWN,
 	}
@@ -75,7 +77,7 @@ static lzma_filter filters_five[6] = {
 		.options = NULL,
 	}, {
 		.id = LZMA_FILTER_LZMA2,
-		.options = (void *)(&lzma_preset_lzma[0]),
+		.options = &opt_lzma,
 	}, {
 		.id = LZMA_VLI_UNKNOWN,
 	}
@@ -230,6 +232,7 @@ int
 main(void)
 {
 	lzma_init();
+	succeed(lzma_lzma_preset(&opt_lzma, 0));
 
 	test1();
 	test2();
diff --git a/tests/test_compress.sh b/tests/test_compress.sh
index 49f3fd50..05668191 100755
--- a/tests/test_compress.sh
+++ b/tests/test_compress.sh
@@ -121,8 +121,8 @@ do
 		--armthumb \
 		--sparc
 	do
-		test_lzma $ARGS --lzma2=dict=64KiB,fb=32,mode=fast
-		test_lzma --subblock $ARGS --lzma2=dict=64KiB,fb=32,mode=fast
+		test_lzma $ARGS --lzma2=dict=64KiB,nice=32,mode=fast
+		test_lzma --subblock $ARGS --lzma2=dict=64KiB,nice=32,mode=fast
 	done
 
 	echo
diff --git a/tests/test_filter_flags.c b/tests/test_filter_flags.c
index 585138d1..2b53a688 100644
--- a/tests/test_filter_flags.c
+++ b/tests/test_filter_flags.c
@@ -200,7 +200,7 @@ static void
 test_lzma(void)
 {
 	// Test 1
-	known_flags.id = LZMA_FILTER_LZMA;
+	known_flags.id = LZMA_FILTER_LZMA1;
 	known_flags.options = NULL;
 	expect(encode(99));