revi-archive/xz-archive
1
0
Fork 0
mirror of https://git.tukaani.org/xz.git synced 2024-04-04 12:36:23 +02:00
Code Activity

liblzma: Improve documentation for block.h.

Browse source 
Standardizing each function to always specify params and return values.
Output pointer parameters are also marked with doxygen style [out] to
make it clear. Any note sections were also moved above the parameter and
return sections for consistency.
This commit is contained in:
Jia Tan 2023-02-03 00:07:23 +08:00
parent c563a4bc55
commit 1f7ab90d9c
1 changed files with 75 additions and 21 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

96
src/liblzma/api/lzma/block.h
View file

@ -338,17 +338,21 @@ typedef struct {
* four and doesn't exceed LZMA_BLOCK_HEADER_SIZE_MAX. Increasing header_size
* just means that lzma_block_header_encode() will add Header Padding.
*
* \return - LZMA_OK: Size calculated successfully and stored to
* block->header_size.
* - LZMA_OPTIONS_ERROR: Unsupported version, filters or
* filter options.
* - LZMA_PROG_ERROR: Invalid values like compressed_size == 0.
*
* \note This doesn't check that all the options are valid i.e. this
* may return LZMA_OK even if lzma_block_header_encode() or
* lzma_block_encoder() would fail. If you want to validate the
* filter chain, consider using lzma_memlimit_encoder() which as
* a side-effect validates the filter chain.
*
* \param block Block options: block->version and block->filters
* must have been initialized.
*
* \return Possible lzma_ret values:
* - LZMA_OK: Size calculated successfully and stored to
* block->header_size.
* - LZMA_OPTIONS_ERROR: Unsupported version, filters or
* filter options.
* - LZMA_PROG_ERROR: Invalid values like compressed_size == 0.
*/
extern LZMA_API(lzma_ret) lzma_block_header_size(lzma_block *block)
lzma_nothrow lzma_attr_warn_unused_result;
@ -362,11 +366,12 @@ extern LZMA_API(lzma_ret) lzma_block_header_size(lzma_block *block)
* lzma_block_header_size() is used, the Block Header will be padded to the
* specified size.
*
* \param out Beginning of the output buffer. This must be
* at least block->header_size bytes.
* \param block Block options to be encoded.
* \param[out] out Beginning of the output buffer. This must be
* at least block->header_size bytes.
*
* \return - LZMA_OK: Encoding was successful. block->header_size
* \return Possible lzma_ret values:
* - LZMA_OK: Encoding was successful. block->header_size
* bytes were written to output buffer.
* - LZMA_OPTIONS_ERROR: Invalid or unsupported options.
* - LZMA_PROG_ERROR: Invalid arguments, for example
@ -398,14 +403,15 @@ extern LZMA_API(lzma_ret) lzma_block_header_encode(
* block->filters must have been allocated, but they don't need to be
* initialized (possible existing filter options are not freed).
*
* \param block Destination for Block options.
* \param[out] block Destination for Block options
* \param allocator lzma_allocator for custom allocator functions.
* Set to NULL to use malloc() (and also free()
* if an error occurs).
* \param in Beginning of the input buffer. This must be
* at least block->header_size bytes.
*
* \return - LZMA_OK: Decoding was successful. block->header_size
* \return Possible lzma_ret values:
* - LZMA_OK: Decoding was successful. block->header_size
* bytes were read from the input buffer.
* - LZMA_OPTIONS_ERROR: The Block Header specifies some
* unsupported options such as unsupported filters. This can
@ -442,7 +448,12 @@ extern LZMA_API(lzma_ret) lzma_block_header_decode(lzma_block *block,
* field so that it can properly validate Compressed Size if it
* was present in Block Header.
*
* \return - LZMA_OK: block->compressed_size was set successfully.
* \param block Block options: block->header_size must
* already be set with lzma_block_header_size().
* \param unpadded_size Unpadded Size from the Index field in bytes
*
* \return Possible lzma_ret values:
* - LZMA_OK: block->compressed_size was set successfully.
* - LZMA_DATA_ERROR: unpadded_size is too small compared to
* block->header_size and lzma_check_size(block->check).
* - LZMA_PROG_ERROR: Some values are invalid. For example,
@ -463,6 +474,9 @@ extern LZMA_API(lzma_ret) lzma_block_compressed_size(
* Compressed Size, and size of the Check field. This is where this function
* is needed.
*
* \param block Block options: block->header_size must already be
* set with lzma_block_header_size().
*
* \return Unpadded Size on success, or zero on error.
*/
extern LZMA_API(lzma_vli) lzma_block_unpadded_size(const lzma_block *block)
@ -475,6 +489,9 @@ extern LZMA_API(lzma_vli) lzma_block_unpadded_size(const lzma_block *block)
* This is equivalent to lzma_block_unpadded_size() except that the returned
* value includes the size of the Block Padding field.
*
* \param block Block options: block->header_size must already be
* set with lzma_block_header_size().
*
* \return On success, total encoded size of the Block. On error,
* zero is returned.
*/
@ -488,7 +505,13 @@ extern LZMA_API(lzma_vli) lzma_block_total_size(const lzma_block *block)
* Valid actions for lzma_code() are LZMA_RUN, LZMA_SYNC_FLUSH (only if the
* filter chain supports it), and LZMA_FINISH.
*
* \return - LZMA_OK: All good, continue with lzma_code().
* \param strm Pointer to lzma_stream that is at least initialized
* with LZMA_STREAM_INIT.
* \param block Block options: block->version, block->check,
* and block->filters must have been initialized.
*
* \return Possible lzma_ret values:
* - LZMA_OK: All good, continue with lzma_code().
* - LZMA_MEM_ERROR
* - LZMA_OPTIONS_ERROR
* - LZMA_UNSUPPORTED_CHECK: block->check specifies a Check ID
@ -507,7 +530,12 @@ extern LZMA_API(lzma_ret) lzma_block_encoder(
* Valid actions for lzma_code() are LZMA_RUN and LZMA_FINISH. Using
* LZMA_FINISH is not required. It is supported only for convenience.
*
* \return - LZMA_OK: All good, continue with lzma_code().
* \param strm Pointer to lzma_stream that is at least initialized
* with LZMA_STREAM_INIT.
* \param block Block options.
*
* \return Possible lzma_ret values:
* - LZMA_OK: All good, continue with lzma_code().
* - LZMA_PROG_ERROR
* - LZMA_MEM_ERROR
*/
@ -521,6 +549,11 @@ extern LZMA_API(lzma_ret) lzma_block_decoder(
*
* This is equivalent to lzma_stream_buffer_bound() but for .xz Blocks.
* See the documentation of lzma_stream_buffer_bound().
*
* \param uncompressed_size Size of the data to be encoded with the
* single-call Block encoder.
*
* \return Maximum output size in bytes for single-call Block encoding.
*/
extern LZMA_API(size_t) lzma_block_buffer_bound(size_t uncompressed_size)
lzma_nothrow;
@ -549,13 +582,14 @@ extern LZMA_API(size_t) lzma_block_buffer_bound(size_t uncompressed_size)
* Set to NULL to use malloc() and free().
* \param in Beginning of the input buffer
* \param in_size Size of the input buffer
* \param out Beginning of the output buffer
* \param out_pos The next byte will be written to out[*out_pos].
* \param[out] out Beginning of the output buffer
* \param[out] out_pos The next byte will be written to out[*out_pos].
* *out_pos is updated only if encoding succeeds.
* \param out_size Size of the out buffer; the first byte into
* which no data is written to is out[out_size].
*
* \return - LZMA_OK: Encoding was successful.
* \return Possible lzma_ret values:
* - LZMA_OK: Encoding was successful.
* - LZMA_BUF_ERROR: Not enough output buffer space.
* - LZMA_UNSUPPORTED_CHECK
* - LZMA_OPTIONS_ERROR
@ -581,6 +615,25 @@ extern LZMA_API(lzma_ret) lzma_block_buffer_encode(
* Since the data won't be compressed, this function ignores block->filters.
* This function doesn't take lzma_allocator because this function doesn't
* allocate any memory from the heap.
*
* \param block Block options: block->version, block->check,
* and block->filters must have been initialized.
* \param in Beginning of the input buffer
* \param in_size Size of the input buffer
* \param[out] out Beginning of the output buffer
* \param[out] out_pos The next byte will be written to out[*out_pos].
* *out_pos is updated only if encoding succeeds.
* \param out_size Size of the out buffer; the first byte into
* which no data is written to is out[out_size].
*
* \return Possible lzma_ret values:
* - LZMA_OK: Encoding was successful.
* - LZMA_BUF_ERROR: Not enough output buffer space.
* - LZMA_UNSUPPORTED_CHECK
* - LZMA_OPTIONS_ERROR
* - LZMA_MEM_ERROR
* - LZMA_DATA_ERROR
* - LZMA_PROG_ERROR
*/
extern LZMA_API(lzma_ret) lzma_block_uncomp_encode(lzma_block *block,
const uint8_t *in, size_t in_size,
@ -594,7 +647,7 @@ extern LZMA_API(lzma_ret) lzma_block_uncomp_encode(lzma_block *block,
* This is single-call equivalent of lzma_block_decoder(), and requires that
* the caller has already decoded Block Header and checked its memory usage.
*
* \param block Block options just like with lzma_block_decoder().
* \param block Block options
* \param allocator lzma_allocator for custom allocator functions.
* Set to NULL to use malloc() and free().
* \param in Beginning of the input buffer
@ -602,13 +655,14 @@ extern LZMA_API(lzma_ret) lzma_block_uncomp_encode(lzma_block *block,
* *in_pos is updated only if decoding succeeds.
* \param in_size Size of the input buffer; the first byte that
* won't be read is in[in_size].
* \param out Beginning of the output buffer
* \param out_pos The next byte will be written to out[*out_pos].
* \param[out] out Beginning of the output buffer
* \param[out] out_pos The next byte will be written to out[*out_pos].
* *out_pos is updated only if encoding succeeds.
* \param out_size Size of the out buffer; the first byte into
* which no data is written to is out[out_size].
*
* \return - LZMA_OK: Decoding was successful.
* \return Possible lzma_ret values:
* - LZMA_OK: Decoding was successful.
* - LZMA_OPTIONS_ERROR
* - LZMA_DATA_ERROR
* - LZMA_MEM_ERROR