Collection of language fixes to comments and docs.

Thanks to Jonathan Nieder.

README

@@ -16,7 +16,7 @@ XZ Utils
 0. Overview
 -----------
 
-    XZ Utils provide a general purporse data compression library and
+    XZ Utils provide a general-purpose data compression library and
     command line tools. The native file format is the .xz format, but
     also the legacy .lzma format is supported. The .xz format supports
     multiple compression algorithms, which are called "filters" in

configure.ac

@@ -612,7 +612,7 @@ AC_SUBST([AM_CFLAGS])
 # Set additional flags for static/dynamic linking. The idea is that every
 # program (not library) being built will use either STATIC_{CPPFLAGS,LDFLAGS}
 # or DYNAMIC_{CPPFLAGS,LDFLAGS} depending on which type of linkage is
-# preferred. These preferences get overriden by use of --disable-static,
+# preferred. These preferences get overridden by use of --disable-static,
 # --disable-shared, or --enable-dynamic.
 #
 # This is quite messy, because we want to use LZMA_API_STATIC when linking

doc/faq.txt

@@ -117,6 +117,6 @@ A:  Give --enable-small to the configure script. Use also appropriate
     for size. See INSTALL for information about configure options.
 
     If the result is still too big, take a look at XZ Embedded. It is
-    a separate project, which provides a limited but signinificantly
+    a separate project, which provides a limited but significantly
     smaller XZ decoder implementation than XZ Utils.
 

extra/7z2lzma/7z2lzma.bash

@@ -62,7 +62,7 @@ if printf '%s\n' "$INFO" | grep -q '^Block = 1'; then
 	exit 1
 fi
 
-# Get copmressed, uncompressed, and dictionary size.
+# Get compressed, uncompressed, and dictionary size.
 CSIZE=$(printf '%s\n' "$INFO" | sed -rn 's|^Packed Size = ([0-9]+$)|\1|p')
 USIZE=$(printf '%s\n' "$INFO" | sed -rn 's|^Size = ([0-9]+$)|\1|p')
 DICT=$(printf '%s\n' "$INFO" | sed -rn 's|^Method = LZMA:([0-9]+[bkm]?)$|\1|p')

src/common/tuklib_progname.c

@@ -1,7 +1,7 @@
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       tuklib_progname.c
-/// \brief      Program name to be displayd in messages
+/// \brief      Program name to be displayed in messages
 //
 //  Author:     Lasse Collin
 //

src/common/tuklib_progname.h

@@ -1,7 +1,7 @@
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       tuklib_progname.h
-/// \brief      Program name to be displayd in messages
+/// \brief      Program name to be displayed in messages
 //
 //  Author:     Lasse Collin
 //

src/liblzma/api/lzma/base.h

@@ -81,7 +81,7 @@ typedef enum {
 		 * the decoder. LZMA_NO_CHECK is just a warning, and
 		 * the decoding can be continued normally.
 		 *
-		 * It is possible to call lzma_get_check() immediatelly after
+		 * It is possible to call lzma_get_check() immediately after
 		 * lzma_code has returned LZMA_NO_CHECK. The result will
 		 * naturally be LZMA_CHECK_NONE, but the possibility to call
 		 * lzma_get_check() may be convenient in some applications.
@@ -107,7 +107,7 @@ typedef enum {
 		 * errors may go undetected.
 		 *
 		 * With decoder, it is possible to call lzma_get_check()
-		 * immediatelly after lzma_code() has returned
+		 * immediately after lzma_code() has returned
 		 * LZMA_UNSUPPORTED_CHECK. This way it is possible to find
 		 * out what the unsupported Check ID was.
 		 */
@@ -280,7 +280,7 @@ typedef enum {
 		 *
 		 * Using LZMA_SYNC_FLUSH very often can dramatically reduce
 		 * the compression ratio. With some filters (for example,
-		 * LZMA2), finetuning the compression options may help
+		 * LZMA2), fine-tuning the compression options may help
 		 * mitigate this problem significantly.
 		 *
 		 * Decoders don't support LZMA_SYNC_FLUSH.
@@ -489,7 +489,7 @@ typedef struct {
 /**
  * \brief       Initialization for lzma_stream
  *
- * When you declare an instance of lzma_stream, you can immediatelly
+ * When you declare an instance of lzma_stream, you can immediately
  * initialize it so that initialization functions know that no memory
  * has been allocated yet:
  *

src/liblzma/api/lzma/bcj.h

@@ -77,7 +77,7 @@ typedef struct {
 	 * This setting is useful only when the same filter is used
 	 * _separately_ for multiple sections of the same executable file,
 	 * and the sections contain cross-section branch/call/jump
-	 * instructions. In that case it is benefical to set the start
+	 * instructions. In that case it is beneficial to set the start
 	 * offset of the non-first sections so that the relative addresses
 	 * of the cross-section branch/call/jump instructions will use the
 	 * same absolute addresses as in the first section.

src/liblzma/api/lzma/block.h

@@ -414,7 +414,7 @@ extern LZMA_API(lzma_vli) lzma_block_total_size(const lzma_block *block)
  * \return      - LZMA_OK: All good, continue with lzma_code().
  *              - LZMA_MEM_ERROR
  *              - LZMA_OPTIONS_ERROR
- *              - LZMA_UNSUPPORTED_CHECK: block->check specfies a Check ID
+ *              - LZMA_UNSUPPORTED_CHECK: block->check specifies a Check ID
  *                that is not supported by this buid of liblzma. Initializing
  *                the encoder failed.
  *              - LZMA_PROG_ERROR

src/liblzma/api/lzma/check.h

@@ -142,7 +142,7 @@ extern LZMA_API(uint64_t) lzma_crc64(
 /**
  * \brief       Get the type of the integrity check
  *
- * This function can be called only immediatelly after lzma_code() has
+ * This function can be called only immediately after lzma_code() has
  * returned LZMA_NO_CHECK, LZMA_UNSUPPORTED_CHECK, or LZMA_GET_CHECK.
  * Calling this function in any other situation has undefined behavior.
  */

src/liblzma/api/lzma/filter.h

@@ -290,7 +290,7 @@ extern LZMA_API(lzma_ret) lzma_raw_buffer_decode(
  * using the raw encoder and decoder.
  *
  * \param       size    Pointer to uint32_t to hold the size of the properties
- * \param       filter  Filter ID and options (the size of the propeties may
+ * \param       filter  Filter ID and options (the size of the properties may
  *                      vary depending on the options)
  *
  * \return      - LZMA_OK
@@ -365,7 +365,7 @@ extern LZMA_API(lzma_ret) lzma_properties_decode(
  *
  * \param       size    Pointer to integer to hold the calculated size
  * \param       filters Filter ID and associated options whose encoded
- *                      size is to be calculted
+ *                      size is to be calculated
  *
  * \return      - LZMA_OK: *size set successfully. Note that this doesn't
  *                guarantee that filters->options is valid, thus

src/liblzma/api/lzma/index.h

@@ -278,7 +278,7 @@ typedef enum {
  *
  * This function calculates an approximate amount of memory needed hold
  * the given number of Streams and Blocks in lzma_index structure. This
- * value may vary between CPU archtectures and also between liblzma versions
+ * value may vary between CPU architectures and also between liblzma versions
  * if the internal implementation is modified.
  */
 extern LZMA_API(uint64_t) lzma_index_memusage(
@@ -477,7 +477,7 @@ extern LZMA_API(lzma_vli) lzma_index_uncompressed_size(const lzma_index *i)
  * associated lzma_index is valid, that is, until lzma_index_end() or
  * using it as source in lzma_index_cat(). Specifically, lzma_index doesn't
  * become invalid if new Blocks are added to it with lzma_index_append() or
- * if it is used as the destionation in lzma_index_cat().
+ * if it is used as the destination in lzma_index_cat().
  *
  * It is safe to make copies of an initialized lzma_index_iter, for example,
  * to easily restart reading at some particular position.
@@ -549,7 +549,7 @@ extern LZMA_API(lzma_bool) lzma_index_iter_locate(
  * Stream.
  *
  * \param       dest      lzma_index after which src is appended
- * \param       src       lzma_index to be appeneded after dest. If this
+ * \param       src       lzma_index to be appended after dest. If this
  *                        function succeeds, the memory allocated for src
  *                        is freed or moved to be part of dest, and all
  *                        iterators pointing to src will become invalid.

src/liblzma/api/lzma/lzma.h

@@ -307,7 +307,7 @@ typedef struct {
 	 * This determines how many bytes the encoder compares from the match
 	 * candidates when looking for the best match. Once a match of at
 	 * least nice_len bytes long is found, the encoder stops looking for
-	 * better condidates and encodes the match. (Naturally, if the found
+	 * better candidates and encodes the match. (Naturally, if the found
 	 * match is actually longer than nice_len, the actual length is
 	 * encoded; it's not truncated to nice_len.)
 	 *

src/liblzma/api/lzma/version.h

@@ -18,7 +18,7 @@
 
 
 /*
- * Version number splitted in components
+ * Version number split into components
  */
 #define LZMA_VERSION_MAJOR 4
 #define LZMA_VERSION_MINOR 999

src/liblzma/api/lzma/vli.h

@@ -57,7 +57,7 @@
  * [0, LZMA_VLI_MAX]. Unknown value is indicated with LZMA_VLI_UNKNOWN,
  * which is the maximum value of the underlaying integer type.
  *
- * In future, even if lzma_vli is typdefined to something else than uint64_t,
+ * In future, even if lzma_vli is defined to be something other than uint64_t,
  * it is guaranteed that 2 * LZMA_VLI_MAX will not overflow lzma_vli.
  * This simplifies integer overflow detection.
  */

src/liblzma/common/block_header_encoder.c

@@ -73,7 +73,7 @@ lzma_block_header_size(lzma_block *block)
 extern LZMA_API(lzma_ret)
 lzma_block_header_encode(const lzma_block *block, uint8_t *out)
 {
-	// Valdidate everything but filters.
+	// Validate everything but filters.
 	if (lzma_block_unpadded_size(block) == 0
 			|| !lzma_vli_is_valid(block->uncompressed_size))
 		return LZMA_PROG_ERROR;

src/liblzma/common/chunk_size.c

@@ -20,7 +20,7 @@
  * doing multi-threaded encoding.
  *
  * When compressing a large file on a system having multiple CPUs or CPU
- * cores, the file can be splitted in smaller chunks, that are compressed
+ * cores, the file can be split into smaller chunks, that are compressed
  * independently into separate Blocks in the same .lzma Stream.
  *
  * \return      Minimum reasonable Uncompressed Size of a Block. The
@@ -45,7 +45,7 @@ lzma_chunk_size(const lzma_options_filter *filters)
 		case LZMA_FILTER_ARMTHUMB:
 		case LZMA_FILTER_SPARC:
 			// These are very fast, thus there is no point in
-			// splitting the data in smaller blocks.
+			// splitting the data into smaller blocks.
 			break;
 
 		case LZMA_FILTER_LZMA1:

src/liblzma/common/common.h

@@ -50,7 +50,7 @@
 
 
 /// Starting value for memory usage estimates. Instead of calculating size
-/// of _every_ structure and taking into accont malloc() overhead etc. we
+/// of _every_ structure and taking into account malloc() overhead etc., we
 /// add a base size to all memory usage estimates. It's not very accurate
 /// but should be easily good enough.
 #define LZMA_MEMUSAGE_BASE (UINT64_C(1) << 15)
@@ -248,7 +248,7 @@ extern size_t lzma_bufcpy(const uint8_t *restrict in, size_t *restrict in_pos,
 
 /// \brief      Return if expression doesn't evaluate to LZMA_OK
 ///
-/// There are several situations where we want to return immediatelly
+/// There are several situations where we want to return immediately
 /// with the value of expr if it isn't LZMA_OK. This macro shortens
 /// the code a little.
 #define return_if_error(expr) \

src/liblzma/common/filter_buffer_decoder.c

@@ -57,7 +57,7 @@ lzma_raw_buffer_decode(const lzma_filter *filters, lzma_allocator *allocator,
 
 			} else {
 				// All the input was consumed and output
-				// buffer is full. Now we don't immediatelly
+				// buffer is full. Now we don't immediately
 				// know the reason for the error. Try
 				// decoding one more byte. If it succeeds,
 				// then the output buffer was too small. If

src/liblzma/common/filter_encoder.c

@@ -32,7 +32,7 @@ typedef struct {
 	uint64_t (*memusage)(const void *options);
 
 	/// Calculates the minimum sane size for Blocks (or other types of
-	/// chunks) to which the input data can be splitted to make
+	/// chunks) to which the input data can be split to make
 	/// multithreaded encoding possible. If this is NULL, it is assumed
 	/// that the encoder is fast enough with single thread.
 	lzma_vli (*chunk_size)(const void *options);
@@ -45,7 +45,7 @@ typedef struct {
 
 	/// Encodes Filter Properties.
 	///
-	/// \return     - LZMA_OK: Properties encoded sucessfully.
+	/// \return     - LZMA_OK: Properties encoded successfully.
 	///             - LZMA_OPTIONS_ERROR: Unsupported options
 	///             - LZMA_PROG_ERROR: Invalid options or not enough
 	///               output space

src/liblzma/common/index.c

@@ -737,7 +737,7 @@ typedef struct {
 
 /// Add the Stream nodes from the source index to dest using recursion.
 /// Simplest iterative traversal of the source tree wouldn't work, because
-/// we update the pointers in nodes when moving them to the destinatino tree.
+/// we update the pointers in nodes when moving them to the destination tree.
 static void
 index_cat_helper(const index_cat_info *info, index_stream *this)
 {
@@ -867,7 +867,7 @@ index_dup_stream(const index_stream *src, lzma_allocator *allocator)
 			src->node.uncompressed_base, src->number,
 			src->block_number_base, allocator);
 
-	// Return immediatelly if allocation failed or if there are
+	// Return immediately if allocation failed or if there are
 	// no groups to duplicate.
 	if (dest == NULL || src->groups.leftmost == NULL)
 		return dest;
@@ -1202,7 +1202,7 @@ lzma_index_iter_locate(lzma_index_iter *iter, lzma_vli target)
 {
 	const lzma_index *i = iter->internal[ITER_INDEX].p;
 
-	// If the target is past the end of the file, return immediatelly.
+	// If the target is past the end of the file, return immediately.
 	if (i->uncompressed_size <= target)
 		return true;
 

src/liblzma/common/index_encoder.c

@@ -218,7 +218,7 @@ extern LZMA_API(lzma_ret)
 lzma_index_buffer_encode(const lzma_index *i,
 		uint8_t *out, size_t *out_pos, size_t out_size)
 {
-	// Validate the arugments.
+	// Validate the arguments.
 	if (i == NULL || out == NULL || out_pos == NULL || *out_pos > out_size)
 		return LZMA_PROG_ERROR;
 

src/liblzma/common/stream_encoder.c

@@ -105,7 +105,7 @@ stream_encode(lzma_coder *coder, lzma_allocator *allocator,
 	case SEQ_BLOCK_INIT: {
 		if (*in_pos == in_size) {
 			// If we are requested to flush or finish the current
-			// Block, return LZMA_STREAM_END immediatelly since
+			// Block, return LZMA_STREAM_END immediately since
 			// there's nothing to do.
 			if (action != LZMA_FINISH)
 				return action == LZMA_RUN

src/liblzma/common/vli_decoder.c

@@ -47,7 +47,7 @@ lzma_vli_decode(lzma_vli *restrict vli, size_t *vli_pos,
 
 	do {
 		// Read the next byte. Use a temporary variable so that we
-		// can update *in_pos immediatelly.
+		// can update *in_pos immediately.
 		const uint8_t byte = in[*in_pos];
 		++*in_pos;
 

src/liblzma/lz/lz_encoder.c

@@ -229,7 +229,7 @@ lz_encoder_prepare(lzma_mf *mf, lzma_allocator *allocator,
 	mf->nice_len = lz_options->nice_len;
 
 	// cyclic_size has to stay smaller than 2 Gi. Note that this doesn't
-	// mean limitting dictionary size to less than 2 GiB. With a match
+	// mean limiting dictionary size to less than 2 GiB. With a match
 	// finder that uses multibyte resolution (hashes start at e.g. every
 	// fourth byte), cyclic_size would stay below 2 Gi even when
 	// dictionary size is greater than 2 GiB.

src/liblzma/lz/lz_encoder.h

@@ -182,7 +182,7 @@ typedef struct {
 // TODO: Maybe this could be changed by making the LZ-based encoders to
 // store the actual literals as they do with length-distance pairs.
 //
-// Alrogithms such as LZMA2 first try to compress a chunk, and then check
+// Algorithms such as LZMA2 first try to compress a chunk, and then check
 // if the encoded result is smaller than the uncompressed one. If the chunk
 // was uncompressible, it is better to store it in uncompressed form in
 // the output stream. To do this, the whole uncompressed chunk has to be

src/liblzma/lzma/lzma2_encoder.c

@@ -169,7 +169,7 @@ lzma2_encode(lzma_coder *restrict coder, lzma_mf *restrict mf,
 		uint32_t limit;
 
 		if (left < mf->match_len_max) {
-			// Must flush immediatelly since the next LZMA symbol
+			// Must flush immediately since the next LZMA symbol
 			// could make the uncompressed size of the chunk too
 			// big.
 			limit = 0;

src/liblzma/lzma/lzma_decoder.c

@@ -195,7 +195,7 @@ struct lzma_coder_s {
 	/// 2 (i.e. MATCH_LEN_MIN), 3, 4, and [5, 273].
 	probability pos_slot[LEN_TO_POS_STATES][POS_SLOTS];
 
-	/// Probility trees for additional bits for match distance when the
+	/// Probability trees for additional bits for match distance when the
 	/// distance is in the range [4, 127].
 	probability pos_special[FULL_DISTANCES - END_POS_MODEL_INDEX];
 
@@ -600,7 +600,7 @@ lzma_decode(lzma_coder *restrict coder, lzma_dict *restrict dictptr,
 					}
 #endif
 				} else {
-					// The distace is >= 128. Decode the
+					// The distance is >= 128. Decode the
 					// lower bits without probabilities
 					// except the lowest four bits.
 					assert(symbol >= 14);

src/liblzma/lzma/lzma_decoder.h

@@ -30,7 +30,7 @@ extern lzma_ret lzma_lzma_props_decode(
 
 /// \brief      Decodes the LZMA Properties byte (lc/lp/pb)
 ///
-/// \return     true if error occorred, false on success
+/// \return     true if error occurred, false on success
 ///
 extern bool lzma_lzma_lclppb_decode(
 		lzma_options_lzma *options, uint8_t byte);

src/liblzma/lzma/lzma_encoder_optimum_fast.c

@@ -62,7 +62,7 @@ lzma_lzma_optimum_fast(lzma_coder *restrict coder, lzma_mf *restrict mf,
 				&& buf[len] == buf_back[len]; ++len) ;
 
 		// If we have found a repeated match that is at least
-		// nice_len long, return it immediatelly.
+		// nice_len long, return it immediately.
 		if (len >= nice_len) {
 			*back_res = i;
 			*len_res = len;

src/liblzma/lzma/lzma_encoder_optimum_normal.c

@@ -838,7 +838,7 @@ lzma_lzma_optimum_normal(lzma_coder *restrict coder, lzma_mf *restrict mf,
 	}
 
 	// TODO: This needs quite a bit of cleaning still. But splitting
-	// the oroginal function to two pieces makes it at least a little
+	// the original function into two pieces makes it at least a little
 	// more readable, since those two parts don't share many variables.
 
 	uint32_t len_end = helper1(coder, mf, back_res, len_res, position);

src/liblzma/lzma/lzma_encoder_private.h

@@ -85,7 +85,7 @@ struct lzma_coder_s {
 	/// Number of match candidates in matches[]
 	uint32_t matches_count;
 
-	/// Varibale to hold the length of the longest match between calls
+	/// Variable to hold the length of the longest match between calls
 	/// to lzma_lzma_optimum_*().
 	uint32_t longest_match_length;
 

src/liblzma/simple/simple_coder.c

@@ -88,7 +88,7 @@ simple_code(lzma_coder *coder, lzma_allocator *allocator,
 				out, out_pos, out_size);
 
 		// If we couldn't flush all the filtered data, return to
-		// application immediatelly.
+		// application immediately.
 		if (coder->pos < coder->filtered)
 			return LZMA_OK;
 

src/liblzma/subblock/subblock_encoder.c

@@ -516,7 +516,7 @@ subblock_buffer(lzma_coder *coder, lzma_allocator *allocator,
 			// Run-length encoder
 			//
 			// First check if there is some data pending and we
-			// have an obvious need to flush it immediatelly.
+			// have an obvious need to flush it immediately.
 			if (coder->rle.count > 0
 					&& (coder->rle.size
 							!= coder->options->rle

src/scripts/xzdiff.1

@@ -24,7 +24,7 @@ xzcmp, xzdiff, lzcmp, lzdiff \- compare compressed files
 .SH DESCRIPTION
 .B  xzcmp
 and
-.B xdiff
+.B xzdiff
 invoke
 .BR cmp (1)
 or

src/scripts/xzless.1

@@ -18,8 +18,8 @@ xzless, lzless \- view xz or lzma compressed (text) files
 .RI [ file ...]
 .SH DESCRIPTION
 .B  xzless
-is a filter that displays pagefulls of uncompressed text from compressed
-file(s) to a terminal.  It works on files compressed with
+is a filter that displays text from compressed files to a terminal.
+It works on files compressed with
 .BR xz (1)
 or
 .BR lzma (1).
@@ -32,13 +32,13 @@ reads from standard input.
 .B xzless
 uses
 .BR less (1)
-as its only pager.  Unlike
+to present its output.  Unlike
 .BR xzmore ,
-the choice of pagers is not alterable by an environment variable.
+its choice of pager cannot be altered by setting an environment variable.
 Commands are based on both
 .BR more (1)
 and
-.BR vi (1),
+.BR vi (1)
 and allow back and forth movement and searching.
 See the
 .BR less (1)

src/xz/coder.c

@@ -189,7 +189,7 @@ coder_set_compression_settings(void)
 
 	if (memory_usage > memory_limit) {
 		// If --no-auto-adjust was used or we didn't find LZMA1 or
-		// LZMA2 as the last filter, give an error immediatelly.
+		// LZMA2 as the last filter, give an error immediately.
 		// --format=raw implies --no-auto-adjust.
 		if (!auto_adjust || opt_format == FORMAT_RAW)
 			memlimit_too_small(memory_usage);

src/xz/file_io.c

@@ -54,7 +54,7 @@ extern void
 io_init(void)
 {
 	// Make sure that stdin, stdout, and and stderr are connected to
-	// a valid file descriptor. Exit immediatelly with exit code ERROR
+	// a valid file descriptor. Exit immediately with exit code ERROR
 	// if we cannot make the file descriptors valid. Maybe we should
 	// print an error message, but our stderr could be screwed anyway.
 	tuklib_open_stdxxx(E_ERROR);

src/xz/main.c

@@ -46,7 +46,7 @@ static const char *
 read_name(const args_info *args)
 {
 	// FIXME: Maybe we should have some kind of memory usage limit here
-	// like the tool has for the actual compression and uncompression.
+	// like the tool has for the actual compression and decompression.
 	// Giving some huge text file with --files0 makes us to read the
 	// whole file in RAM.
 	static char *name = NULL;
@@ -188,7 +188,7 @@ main(int argc, char **argv)
 	if (opt_mode != MODE_LIST)
 		signals_init();
 
-	// coder_run() handles compression, decopmression, and testing.
+	// coder_run() handles compression, decompression, and testing.
 	// list_file() is for --list.
 	void (*run)(const char *filename) = opt_mode == MODE_LIST
 			 ? &list_file : &coder_run;
@@ -226,7 +226,7 @@ main(int argc, char **argv)
 			args.arg_names[i] = (char *)stdin_filename;
 		}
 
-		// Do the actual compression or uncompression.
+		// Do the actual compression or decompression.
 		run(args.arg_names[i]);
 	}
 

src/xz/main.h

@@ -1,7 +1,7 @@
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       main.h
-/// \brief      Miscellanous declarations
+/// \brief      Miscellaneous declarations
 //
 //  Author:     Lasse Collin
 //

src/xz/message.c

@@ -288,7 +288,7 @@ message_progress_start(lzma_stream *strm, uint64_t in_size)
 	if (verbosity >= V_VERBOSE && progress_automatic) {
 		// Start the timer to display the first progress message
 		// after one second. An alternative would be to show the
-		// first message almost immediatelly, but delaying by one
+		// first message almost immediately, but delaying by one
 		// second looks better to me, since extremely early
 		// progress info is pretty much useless.
 #ifdef SIGALRM
@@ -383,8 +383,8 @@ progress_sizes(uint64_t compressed_pos, uint64_t uncompressed_pos, bool final)
 static const char *
 progress_speed(uint64_t uncompressed_pos, uint64_t elapsed)
 {
-	// Don't print the speed immediatelly, since the early values look
-	// like somewhat random.
+	// Don't print the speed immediately, since the early values look
+	// somewhat random.
 	if (elapsed < 3000000)
 		return "";
 
@@ -870,8 +870,8 @@ message_mem_needed(enum message_verbosity v, uint64_t memusage)
 				uint64_to_str(memlimit, 1));
 	} else {
 		// Round up just like with memusage. If this function is
-		// called for informational purporse (to just show the
-		// current usage and limit), we will never show that
+		// called for informational purposes (to just show the
+		// current usage and limit), we should never show that
 		// the usage is higher than the limit, which would give
 		// a false impression that the memory usage limit isn't
 		// properly enforced.

src/xz/message.h

@@ -116,7 +116,7 @@ extern void message_set_files(unsigned int files);
 
 /// \brief      Set the name of the current file and possibly print it too
 ///
-/// The name is printed immediatelly if --list was used or if --verbose
+/// The name is printed immediately if --list was used or if --verbose
 /// was used and stderr is a terminal. Even when the filename isn't printed,
 /// it is stored so that it can be printed later if needed for progress
 /// messages.

src/xz/xz.1

@@ -121,7 +121,7 @@ is not a regular file. Symbolic links are not followed, thus they
 are not considered to be regular files.
 .IP \(bu 3
 .I File
-has more than one hardlink.
+has more than one hard link.
 .IP \(bu 3
 .I File
 has setuid, setgid, or sticky bit set.
@@ -223,7 +223,7 @@ The absolute value of the active memory usage limit can be seen with
 .B \-\-info-memory
 or near the bottom of the output of
 .BR \-\-long\-help .
-The default limit can be overriden with
+The default limit can be overridden with
 \fB\-\-memory=\fIlimit\fR.
 .SH OPTIONS
 .SS "Integer suffixes and special values"
@@ -299,7 +299,7 @@ If the target file already exists, delete it before compressing or
 decompressing.
 .IP \(bu 3
 Compress or decompress even if the input is a symbolic link to a regular file,
-has more than one hardlink, or has setuid, setgid, or sticky bit set.
+has more than one hard link, or has setuid, setgid, or sticky bit set.
 The setuid, setgid, and sticky bits are not copied to the target file.
 .IP \(bu 3
 If combined with
@@ -399,10 +399,10 @@ This is the default. When compressing,
 .B auto
 is equivalent to
 .BR xz .
-When decompressing, the format of the input file is autodetected. Note that
-raw streams (created with
+When decompressing, the format of the input file is automatically detected.
+Note that raw streams (created with
 .BR \-\-format=raw )
-cannot be autodetected.
+cannot be auto-detected.
 .IP \(bu 3
 .BR xz :
 Compress to the
@@ -568,7 +568,7 @@ increase a little with presets \fB\-0\fR ... \fB\-2\fR). The downside is that
 the compression time will increase dramatically (it can easily double).
 .TP
 \fB\-M\fR \fIlimit\fR, \fB\-\-memory=\fIlimit
-Set the memory usage limit. If this option is specied multiple times,
+Set the memory usage limit. If this option is specified multiple times,
 the last one takes effect. The
 .I limit
 can be specified in multiple ways:
@@ -1260,7 +1260,7 @@ files which have dictionary size of
 .RI "2^" n
 or
 .RI "2^" n " + 2^(" n "\-1)."
-This is to decrease false positives when autodetecting
+This is to decrease false positives when detecting
 .B .lzma
 files.
 .PP

src/xzdec/lzmadec_w32res.rc

@@ -1,5 +1,5 @@
 #define MY_TYPE VFT_APP
 #define MY_NAME "lzmadec"
 #define MY_SUFFIX ".exe"
-#define MY_DESC "lzmadec uncompression tool for .lzma files"
+#define MY_DESC "lzmadec decompression tool for .lzma files"
 #include "common_w32res.rc"

src/xzdec/xzdec_w32res.rc

@@ -8,5 +8,5 @@
 #define MY_TYPE VFT_APP
 #define MY_NAME "xzdec"
 #define MY_SUFFIX ".exe"
-#define MY_DESC "xzdec uncompression tool for .xz files"
+#define MY_DESC "xzdec decompression tool for .xz files"
 #include "common_w32res.rc"

tests/test_index.c

@@ -570,7 +570,7 @@ test_locate(void)
 		expect(r.block.uncompressed_file_offset == ubase + n * 4);
 	}
 
-	// Test locating in concatend Index.
+	// Test locating in concatenated Index.
 	lzma_index_end(i, NULL);
 	i = lzma_index_init(NULL);
 	expect(i != NULL);

windows/build.sh

@@ -37,10 +37,10 @@ do
 done
 
 
-# Abort immediatelly if something goes wrong.
+# Abort immediately if something goes wrong.
 set -e
 
-# White spaces in directory names may break things so catch them immediatelly.
+# White spaces in directory names may break things so catch them immediately.
 case $(pwd) in
 	' ' | '	' | '
 ') echo "Error: White space in the directory name" >&2; exit 1 ;;