1
0
Fork 0
mirror of https://git.tukaani.org/xz.git synced 2024-04-04 12:36:23 +02:00
Commit graph

1227 commits

Author SHA1 Message Date
Lasse Collin
88276f9f2c liblzma: Optimize literal_subcoder() macro slightly. 2024-02-14 18:31:16 +02:00
Lasse Collin
5938f6de4d liblzma: LZ decoder: Add unlikely(). 2024-02-14 18:31:16 +02:00
Lasse Collin
9c252e3ed0 liblzma: LZ decoder: Remove a useless unlikely(). 2024-02-14 18:31:16 +02:00
Lasse Collin
f3872a5947 liblzma: Optimize LZ decoder slightly.
Now extra buffer space is reserved so that repeating bytes for
any single match will never need to copy from two places (both
the beginning and the end of the buffer). This simplifies
dict_repeat() and helps a little with speed.

This seems to reduce .lzma decompression time about 2 %, so
with .xz and CRC it could be slightly less. The small things
add up still.
2024-02-14 18:31:16 +02:00
Lasse Collin
eb518446e5 liblzma: LZMA decoder: Get rid of next_state[].
It's not completely obvious if this is better in the decoder.
It should be good if compiler can avoid creating a branch
(like using CMOV on x86).

This also makes lzma_encoder.c use the new macros.
2024-02-14 18:31:16 +02:00
Lasse Collin
e0c0ee475c liblzma: LZMA decoder improvements.
This adds macros for bittree decoding which prepares the code
for alternative C versions and inline assembly.
2024-02-14 18:31:16 +02:00
Jia Tan
de5c5e4176 liblzma: Creates Non-resumable and Resumable modes for lzma_decoder.
The new decoder resumes the first decoder loop in the Resumable mode.
Then, the code executes in Non-resumable mode until it detects that it
cannot guarantee to have enough input/output to decode another symbol.

The Resumable mode is how the decoder has always worked. Before decoding
every input bit, it checks if there is enough space and will save its
location to be resumed later. When the decoder has more input/output,
it jumps back to the correct sequence in the Resumable mode code.

When the input/output buffers are large, the Resumable mode is much
slower than the Non-resumable because it has more branches and is harder
for the compiler to optimize since it is in a large switch block.

Early benchmarking shows significant time improvement (8-10% on gcc and
clang x86) by using the Non-resumable code as much as possible.
2024-02-14 18:31:16 +02:00
Jia Tan
e446ab7a18 liblzma: Creates separate "safe" range decoder mode.
The new "safe" range decoder mode is the same as old range decoder, but
now the default behavior of the range decoder will not check if there is
enough input or output to complete the operation. When the buffers are
close to fully consumed, the "safe" operations must be used instead. This
will improve speed because it will reduce the number of branches needed
for most of the range decoder operations.
2024-02-14 18:31:16 +02:00
Lasse Collin
e48287bf51 xzdiff, xzgrep, and xzmore: Rewrite the man pages.
The main reason is a kind of silly one:

xz-man.pot contains strings from all man pages in XZ Utils.
The man pages of xzdiff, xzgrep, and xzmore were under GPLv2
and the rest under 0BSD. Thus xz-man.pot contained strings
under two licences. po4a creates the translated man pages
from the combined 0BSD+GPLv2 xz-man.pot.

I haven't liked this mixing in xz-man.pot but the
Translation Project requires that all man pages must be
in the same .pot file. So a separate xz-man-gpl.pot
wasn't an option.

Since these man pages are short, rewriting them was quick enough.
Now xz-man.pot is entirely under 0BSD and marking the per-file
licenses is simpler.

As a bonus, some wording hopefully is now slightly better
although it's perhaps a matter of taste.

NOTE: In xzgrep.1, the EXIT STATUS section was written by me
in the commit d796b6d7fd so that's
why that section could be taken as is from the old xzgrep.1.
2024-02-14 18:31:16 +02:00
Lasse Collin
3e551b111b xzless: Update man page slightly.
The xz tool can decompress three file formats and xzless
has always supported uncompressed files too.
2024-02-14 18:31:16 +02:00
Lasse Collin
b941549573 liblzma: Include the SPDX license identifier 0BSD to generated files.
Perhaps the generated files aren't even copyrightable but
using the same license for them as for the rest of the liblzma
keeps things more consistent for tools that look for license info.
2024-02-14 18:31:16 +02:00
Lasse Collin
8e4ec79483 liblzma: Fix compilation of price_tablegen.c.
It is built and run only manually so this didn't matter
unless one wanted to regenerate the price_table.c.
2024-02-14 18:31:16 +02:00
Lasse Collin
e99bff3ffb Add SPDX license identifiers to GPL, LGPL, and FSFULLR files. 2024-02-14 18:31:16 +02:00
Lasse Collin
22af94128b Add SPDX license identifier into 0BSD source code files. 2024-02-14 18:31:16 +02:00
Lasse Collin
23de53421e liblzma: Sync the AUTHORS fix about SHA-256 to lzma.h. 2024-02-14 18:31:16 +02:00
Lasse Collin
689e0228ba Change most public domain parts to 0BSD.
Translations and doc/xz-file-format.txt and doc/lzma-file-format.txt
were not touched.

COPYING.0BSD was added.
2024-02-14 18:31:12 +02:00
Lasse Collin
76946dc433 Fix SHA-256 authors.
The initial commit 5d018dc035
in 2007 had a comment in sha256.c that the code is based on
Crypto++ Library 5.5.1. In 2009 the Authors list in sha256.c
and the AUTHORS file was updated with information that the
code had come from Crypto++ but via 7-Zip. I know I had viewed
7-Zip's SHA-256 code but back then the C code has been identical
enough with Crypto++, so I don't why I thought the author info
would need that extra step via 7-Zip for this single file.

Another error is that I had mixed sha.* and shacal2.* files
when checking for author info in Crypto++. The shacal2.* files
aren't related to liblzma's sha256.c and thus Kevin Springle's
code in Crypto++ isn't either.
2024-02-14 15:23:00 +02:00
Jia Tan
45663443eb liblzma: Fix build error if only RISC-V BCJ filter is enabled.
If any other BCJ filter was enabled for encoding or decoding, then this
was not a problem.
2024-02-13 23:33:21 +08:00
Lasse Collin
9860d418d2 xzless: Use ||- in LESSOPEN with with "less" 451 and newer. 2024-02-09 23:21:01 +02:00
Lasse Collin
fd0692b052 xzless: Use --show-preproc-errors with "less" 632 and newer.
This makes "less" show a warning if a decompression error occurred.
2024-02-09 23:00:05 +02:00
Jia Tan
adb073da76 liblzma: Fix typo discovered by codespell. 2024-02-09 23:59:54 +08:00
Jia Tan
7f68a68c19 liblzma: Update Authors list in crc32_arm64.h. 2024-02-02 01:38:51 +08:00
Jia Tan
97f9ba50b8 liblzma: Check HAVE_USABLE_CLMUL before omitting CRC32 table.
This was split from the prior commit so it could be easily applied to
the 5.4 branch.

Closes: https://github.com/tukaani-project/xz/pull/77
2024-02-01 20:09:11 +08:00
Jia Tan
ca9015f4de liblzma: Check HAVE_USABLE_CLMUL before omitting CRC64 table.
If liblzma is configured with --disable-clmul-crc
CFLAGS="-msse4.1 -mpclmul", then it will fail to compile because the
generic version must be used but the CRC tables were not included.
2024-02-01 20:09:11 +08:00
Jia Tan
2f1552a91c liblzma: Only use ifunc in crcXX_fast.c if its needed.
The code was using HAVE_FUNC_ATTRIBUTE_IFUNC instead of CRC_USE_IFUNC.
With ARM64, ifunc is incompatible because it requires non-inline
function calls for runtime detection.
2024-02-01 20:09:11 +08:00
Jia Tan
1940f0ec28 liblzma: Omit CRC tables when not needed with ARM64 optimizations.
This is similar to the existing x86-64 CLMUL conditions to omit the
tables. They were slightly refactored to improve readability.
2024-02-01 20:09:11 +08:00
Jia Tan
761f5b69a4 liblzma: Rename crc32_aarch64.h to crc32_arm64.h.
Even though the proper name for the architecture is aarch64, this
project uses ARM64 throughout. So the rename is for consistency.

Additionally, crc32_arm64.h was slightly refactored for the following
changes:

   * Added MSVC, FreeBSD, and macOS support in
     is_arch_extension_supported().

   * crc32_arch_optimized() now checks the size when aligning the
     buffer.

   * crc32_arch_optimized() loop conditions were slightly modified to
     avoid both decrementing the size and incrementing the buffer
     pointer.

   * Use the intrinsic wrappers defined in <arm_acle.h> because GCC and
     Clang name them differently.

   * Minor spacing and comment changes.
2024-02-01 20:09:11 +08:00
Jia Tan
455a08609c liblzma: Refactor crc_common.h.
The CRC_GENERIC is now split into CRC32_GENERIC and CRC64_GENERIC, since
the ARM64 optimizations will be different between CRC32 and CRC64.

For the same reason, CRC_ARCH_OPTIMIZED is split into
CRC32_ARCH_OPTIMIZED and CRC64_ARCH_OPTIMIZED.

ifunc will only be used with x86-64 CLMUL because the runtime detection
methods needed with ARM64 are not compatible with ifunc.
2024-02-01 20:09:11 +08:00
Chenxi Mao
849d0f282a Speed up CRC32 calculation on ARM64
The CRC32 instructions in ARM64 can calculate the CRC32 result
for 8 bytes in a single operation, making the use of ARM64
instructions much faster compared to the general CRC32 algorithm.

Optimized CRC32 will be enabled if ARM64 has CRC extension
running on Linux.

Signed-off-by: Chenxi Mao <chenxi.mao2013@gmail.com>
2024-01-27 21:49:26 +08:00
Jia Tan
b43c3e48bf Bump version number for 5.5.1alpha. 2024-01-26 19:05:51 +08:00
Lasse Collin
6daa4d0ea4 xz: Use threaded mode by defaut (as if --threads=0 was used).
This hopefully does more good than bad:

  + It's faster by default.

  + Only the threaded compressor creates files that
    can be decompressed in threaded mode.

  - Compression ratio is worse, usually not too much though.
    When it matters, -T1 must be used.

  - Memory usage increases.

  - Scripts that assume single-threaded mode but don't use -T1 will
    possibly use too much resources, for example, if they run
    multiple xz processes in parallel to compress multiple files.

  - Output from single-threaded and multi-threaded compressors
    differ but such changes could happen for other reasons too
    (they just haven't happened since 5.0.0).
2024-01-23 18:29:28 +02:00
Lasse Collin
6133a3f300 xz: Man page: Add more examples of LZMA2 options with BCJ filters. 2024-01-23 23:05:47 +08:00
Lasse Collin
50255feeaa liblzma: RISC-V filter: Use byte-by-byte access.
Not all RISC-V processors support fast unaligned access so
it's better to read only one byte in the main loop. This can
be faster even on x86-64 when compared to reading 32 bits at
a time as half the time the address is only 16-bit aligned.

The downside is larger code size on archs that do support
fast unaligned access.
2024-01-23 23:05:47 +08:00
Jia Tan
db5eb5f563 xz: Update xz -lvv for RISC-V filter.
Version 5.6.0 will be shown, even though upcoming alphas and betas
will be able to support this filter. 5.6.0 looks nicer in the output and
people shouldn't be encouraged to use an unstable version in production
in any way.
2024-01-23 23:05:47 +08:00
Jia Tan
b26a898693 xz: Update message in --long-help for RISC-V Filter. 2024-01-23 23:05:47 +08:00
Jia Tan
283f778908 xz: Update the man page for the RISC-V Filter.
A special note was added to suggest using four-byte alignment when the
compressed instruction extension is not present in a RISC-V binary.
2024-01-23 23:05:47 +08:00
Jia Tan
2959dbc735 liblzma: Update string_conversion.c to support RISC-V Filter. 2024-01-23 23:05:47 +08:00
Jia Tan
440a2eccb0 liblzma: Add RISC-V BCJ filter.
The new Filter ID is 0x0B.

Thanks to Chien Wong <m@xv97.com> for the initial version of the Filter,
the xz CLI updates, and the Autotools build system modifications.

Thanks to Igor Pavlov for his many contributions to the design of
the filter.
2024-01-23 23:05:41 +08:00
Jia Tan
22d86192f8 xz: Update website URLs in the man pages. 2024-01-19 23:08:14 +08:00
Jia Tan
6b63c4c613 liblzma: Update website URL. 2024-01-19 23:08:14 +08:00
Lasse Collin
fbb3ce541e liblzma: CRC: Add a comment to crc_x86_clmul.h about BUILDING_ macros. 2024-01-11 15:25:00 +02:00
Lasse Collin
4f518c1b6b liblzma: CRC: Remove crc_always_inline, use lzma_always_inline instead.
Now crc_simd_body() in crc_x86_clmul.h is only called once
in a translation unit, we no longer need to be so cautious
about ensuring the always-inline behavior.
2024-01-11 15:24:35 +02:00
Lasse Collin
35c03ec6bf liblzma: CRC: Update CLMUL comments to more generic wording. 2024-01-11 14:39:46 +02:00
Lasse Collin
66f080e801 liblzma: Rename arch-specific CRC functions and macros.
CRC_CLMUL was split to CRC_ARCH_OPTIMIZED and CRC_X86_CLMUL.
CRC_ARCH_OPTIMIZED is defined when an arch-optimized version is used.
Currently the x86 CLMUL implementations are the only arch-optimized
versions, and these also use the CRC_x86_CLMUL macro to tell when
crc_x86_clmul.h needs to be included.

is_clmul_supported() was renamed to is_arch_extension_supported().
crc32_clmul() and crc64_clmul() were renamed to
crc32_arch_optimized() and crc64_arch_optimized().
This way the names make sense with arch-specific non-CLMUL
implementations as well.
2024-01-11 14:29:42 +02:00
Lasse Collin
3dbed75b0b liblzma: Fix a comment in crc_common.h. 2024-01-11 14:29:42 +02:00
Lasse Collin
419f55f9df liblzma: Avoid extern lzma_crc32_clmul() and lzma_crc64_clmul().
A CLMUL-only build will have the crcxx_clmul() inlined into
lzma_crcxx(). Previously a jump to the extern lzma_crcxx_clmul()
was needed. Notes about shared liblzma on ELF platforms:

  - On platforms that support ifunc and -fvisibility=hidden, this
    was silly because CLMUL-only build would have that single extra
    jump instruction of extra overhead.

  - On platforms that support neither -fvisibility=hidden nor linker
    version script (liblzma*.map), jumping to lzma_crcxx_clmul()
    would go via PLT so a few more instructions of overhead (still
    not a big issue but silly nevertheless).

There was a downside with static liblzma too: if an application only
needs lzma_crc64(), static linking would make the linker include the
CLMUL code for both CRC32 and CRC64 from crc_x86_clmul.o even though
the CRC32 code wouldn't be needed, thus increasing code size of the
executable (assuming that -ffunction-sections isn't used).

Also, now compilers are likely to inline crc_simd_body()
even if they don't support the always_inline attribute
(or MSVC's __forceinline). Quite possibly all compilers
that build the code do support such an attribute. But now
it likely isn't a problem even if the attribute wasn't supported.

Now all x86-specific stuff is in crc_x86_clmul.h. If other archs
The other archs can then have their own headers with their own
is_clmul_supported() and crcxx_clmul().

Another bonus is that the build system doesn't need to care if
crc_clmul.c is needed.

is_clmul_supported() stays as inline function as it's not needed
when doing a CLMUL-only build (avoids a warning about unused function).
2024-01-11 14:29:42 +02:00
Lasse Collin
e3833e297d liblzma: crc_clmul.c: Add crc_attr_target macro.
This reduces the number of the complex #if directives.
2024-01-11 14:29:42 +02:00
Lasse Collin
d164ac0e62 liblzma: Simplify existing cases with lzma_attr_no_sanitize_address. 2024-01-11 14:29:42 +02:00
Lasse Collin
9523c1300d liblzma: #define crc_attr_no_sanitize_address in crc_common.h. 2024-01-11 14:29:38 +02:00
Lasse Collin
93d144f093 liblzma: CRC: Add empty lines.
And remove one too.
2024-01-10 17:19:03 +02:00