New Crowdin updates (#2066)

* New translations get-started.txt (Malay)

* New translations bannerbomb3-fredtool-(twn).txt (Pirate English)

* New translations bannerbomb3-fredtool-(twn).txt (French)

* New translations installing-boot9strap-(pichaxx).txt (Romanian)

* New translations installing-boot9strap-(kartdlphax).txt (Romanian)

* New translations bannerbomb3-fredtool-(twn).txt (Romanian)

* New translations installing-boot9strap-(fredtool).txt (French)

* New translations installing-boot9strap-(usm).txt (French)

* New translations installing-boot9strap-(pichaxx).txt (French)

* New translations installing-boot9strap-(kartdlphax).txt (French)

* New translations seedminer.txt (Romanian)

* New translations installing-boot9strap-(fredtool).txt (Spanish)

* New translations seedminer.txt (Spanish)

* New translations installing-boot9strap-(usm).txt (Spanish)

* New translations installing-boot9strap-(pichaxx).txt (Spanish)

* New translations installing-boot9strap-(kartdlphax).txt (Spanish)

* New translations bannerbomb3-fredtool-(twn).txt (Spanish)

* New translations installing-boot9strap-(usm).txt (Romanian)

* New translations installing-boot9strap-(fredtool).txt (Romanian)

* New translations bannerbomb3-fredtool-(twn).txt (Korean)

* New translations installing-boot9strap-(usm).txt (Korean)

* New translations seedminer.txt (French)

* New translations bannerbomb3-fredtool-(twn).txt (Czech)

* New translations installing-boot9strap-(fredtool).txt (Czech)

* New translations seedminer.txt (Czech)

* New translations installing-boot9strap-(usm).txt (Czech)

* New translations installing-boot9strap-(pichaxx).txt (Czech)

* New translations installing-boot9strap-(kartdlphax).txt (Czech)

* New translations installing-boot9strap-(kartdlphax).txt (Catalan)

* New translations installing-boot9strap-(fredtool).txt (German)

* New translations seedminer.txt (German)

* New translations installing-boot9strap-(usm).txt (German)

* New translations installing-boot9strap-(pichaxx).txt (German)

* New translations installing-boot9strap-(kartdlphax).txt (German)

* New translations bannerbomb3-fredtool-(twn).txt (German)

* New translations bannerbomb3-fredtool-(twn).txt (Catalan)

* New translations installing-boot9strap-(pichaxx).txt (Catalan)

* New translations installing-boot9strap-(fredtool).txt (Bulgarian)

* New translations installing-boot9strap-(fredtool).txt (Arabic)

* New translations seedminer.txt (Arabic)

* New translations installing-boot9strap-(usm).txt (Arabic)

* New translations installing-boot9strap-(pichaxx).txt (Arabic)

* New translations installing-boot9strap-(kartdlphax).txt (Arabic)

* New translations bannerbomb3-fredtool-(twn).txt (Arabic)

* New translations seedminer.txt (Bulgarian)

* New translations installing-boot9strap-(usm).txt (Catalan)

* New translations installing-boot9strap-(usm).txt (Bulgarian)

* New translations installing-boot9strap-(pichaxx).txt (Bulgarian)

* New translations installing-boot9strap-(kartdlphax).txt (Bulgarian)

* New translations bannerbomb3-fredtool-(twn).txt (Bulgarian)

* New translations installing-boot9strap-(fredtool).txt (Catalan)

* New translations seedminer.txt (Catalan)

* New translations bannerbomb3-fredtool-(twn).txt (Hungarian)

* New translations installing-boot9strap-(fredtool).txt (Hungarian)

* New translations seedminer.txt (Hungarian)

* New translations installing-boot9strap-(usm).txt (Hungarian)

* New translations installing-boot9strap-(pichaxx).txt (Hungarian)

* New translations installing-boot9strap-(kartdlphax).txt (Hungarian)

* New translations installing-boot9strap-(kartdlphax).txt (Hebrew)

* New translations installing-boot9strap-(fredtool).txt (Italian)

* New translations seedminer.txt (Italian)

* New translations installing-boot9strap-(usm).txt (Italian)

* New translations installing-boot9strap-(pichaxx).txt (Italian)

* New translations installing-boot9strap-(kartdlphax).txt (Italian)

* New translations bannerbomb3-fredtool-(twn).txt (Italian)

* New translations bannerbomb3-fredtool-(twn).txt (Hebrew)

* New translations installing-boot9strap-(pichaxx).txt (Hebrew)

* New translations installing-boot9strap-(fredtool).txt (Finnish)

* New translations installing-boot9strap-(fredtool).txt (Greek)

* New translations seedminer.txt (Greek)

* New translations installing-boot9strap-(usm).txt (Greek)

* New translations installing-boot9strap-(pichaxx).txt (Greek)

* New translations installing-boot9strap-(kartdlphax).txt (Greek)

* New translations bannerbomb3-fredtool-(twn).txt (Greek)

* New translations seedminer.txt (Finnish)

* New translations installing-boot9strap-(usm).txt (Hebrew)

* New translations installing-boot9strap-(usm).txt (Finnish)

* New translations installing-boot9strap-(pichaxx).txt (Finnish)

* New translations installing-boot9strap-(kartdlphax).txt (Finnish)

* New translations bannerbomb3-fredtool-(twn).txt (Finnish)

* New translations installing-boot9strap-(fredtool).txt (Hebrew)

* New translations seedminer.txt (Hebrew)

* New translations installing-boot9strap-(fredtool).txt (Korean)

* New translations installing-boot9strap-(kartdlphax).txt (Korean)

* New translations installing-boot9strap-(pichaxx).txt (Korean)

* New translations seedminer.txt (Korean)

* New translations installing-boot9strap-(fredtool).txt (Japanese)

* New translations bannerbomb3-fredtool-(twn).txt (Japanese)

* New translations installing-boot9strap-(kartdlphax).txt (Japanese)

* New translations installing-boot9strap-(pichaxx).txt (Japanese)

* New translations installing-boot9strap-(usm).txt (Japanese)

* New translations seedminer.txt (Japanese)

* New translations installing-boot9strap-(fredtool).txt (Polish)

* New translations seedminer.txt (Polish)

* New translations installing-boot9strap-(usm).txt (Polish)

* New translations installing-boot9strap-(pichaxx).txt (Polish)

* New translations installing-boot9strap-(kartdlphax).txt (Polish)

* New translations bannerbomb3-fredtool-(twn).txt (Polish)

* New translations installing-boot9strap-(fredtool).txt (Portuguese)

* New translations bannerbomb3-fredtool-(twn).txt (Norwegian)

* New translations installing-boot9strap-(kartdlphax).txt (Norwegian)

* New translations installing-boot9strap-(pichaxx).txt (Norwegian)

* New translations installing-boot9strap-(usm).txt (Norwegian)

* New translations seedminer.txt (Norwegian)

* New translations installing-boot9strap-(fredtool).txt (Norwegian)

* New translations bannerbomb3-fredtool-(twn).txt (Dutch)

* New translations installing-boot9strap-(kartdlphax).txt (Dutch)

* New translations installing-boot9strap-(pichaxx).txt (Dutch)

* New translations installing-boot9strap-(usm).txt (Dutch)

* New translations seedminer.txt (Dutch)

* New translations installing-boot9strap-(fredtool).txt (Dutch)

* New translations seedminer.txt (Portuguese)

* New translations installing-boot9strap-(usm).txt (Portuguese)

* New translations installing-boot9strap-(fredtool).txt (Turkish)

* New translations seedminer.txt (Turkish)

* New translations installing-boot9strap-(usm).txt (Turkish)

* New translations installing-boot9strap-(pichaxx).txt (Turkish)

* New translations installing-boot9strap-(kartdlphax).txt (Turkish)

* New translations bannerbomb3-fredtool-(twn).txt (Turkish)

* New translations installing-boot9strap-(fredtool).txt (Ukrainian)

* New translations seedminer.txt (Ukrainian)

* New translations installing-boot9strap-(usm).txt (Ukrainian)

* New translations installing-boot9strap-(pichaxx).txt (Ukrainian)

* New translations installing-boot9strap-(kartdlphax).txt (Ukrainian)

* New translations bannerbomb3-fredtool-(twn).txt (Ukrainian)

* New translations installing-boot9strap-(fredtool).txt (Chinese Simplified)

* New translations installing-boot9strap-(pichaxx).txt (Portuguese)

* New translations installing-boot9strap-(kartdlphax).txt (Russian)

* New translations installing-boot9strap-(kartdlphax).txt (Portuguese)

* New translations bannerbomb3-fredtool-(twn).txt (Portuguese)

* New translations installing-boot9strap-(fredtool).txt (Russian)

* New translations seedminer.txt (Russian)

* New translations installing-boot9strap-(usm).txt (Russian)

* New translations installing-boot9strap-(pichaxx).txt (Russian)

* New translations bannerbomb3-fredtool-(twn).txt (Russian)

* New translations installing-boot9strap-(fredtool).txt (Swedish)

* New translations seedminer.txt (Swedish)

* New translations installing-boot9strap-(usm).txt (Swedish)

* New translations installing-boot9strap-(pichaxx).txt (Swedish)

* New translations installing-boot9strap-(kartdlphax).txt (Swedish)

* New translations bannerbomb3-fredtool-(twn).txt (Swedish)

* New translations seedminer.txt (Chinese Simplified)

* New translations installing-boot9strap-(usm).txt (Chinese Simplified)

* New translations installing-boot9strap-(fredtool).txt (Portuguese, Brazilian)

* New translations seedminer.txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(usm).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(pichaxx).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(kartdlphax).txt (Portuguese, Brazilian)

* New translations bannerbomb3-fredtool-(twn).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(fredtool).txt (Indonesian)

* New translations seedminer.txt (Indonesian)

* New translations installing-boot9strap-(usm).txt (Indonesian)

* New translations installing-boot9strap-(pichaxx).txt (Indonesian)

* New translations installing-boot9strap-(kartdlphax).txt (Indonesian)

* New translations bannerbomb3-fredtool-(twn).txt (Indonesian)

* New translations installing-boot9strap-(fredtool).txt (Thai)

* New translations installing-boot9strap-(pichaxx).txt (Chinese Simplified)

* New translations installing-boot9strap-(kartdlphax).txt (Chinese Traditional)

* New translations installing-boot9strap-(kartdlphax).txt (Chinese Simplified)

* New translations bannerbomb3-fredtool-(twn).txt (Chinese Simplified)

* New translations installing-boot9strap-(fredtool).txt (Chinese Traditional)

* New translations seedminer.txt (Chinese Traditional)

* New translations installing-boot9strap-(usm).txt (Chinese Traditional)

* New translations installing-boot9strap-(pichaxx).txt (Chinese Traditional)

* New translations bannerbomb3-fredtool-(twn).txt (Chinese Traditional)

* New translations installing-boot9strap-(fredtool).txt (Vietnamese)

* New translations seedminer.txt (Vietnamese)

* New translations installing-boot9strap-(usm).txt (Vietnamese)

* New translations installing-boot9strap-(pichaxx).txt (Vietnamese)

* New translations installing-boot9strap-(kartdlphax).txt (Vietnamese)

* New translations bannerbomb3-fredtool-(twn).txt (Vietnamese)

* New translations seedminer.txt (Thai)

* New translations bannerbomb3-fredtool-(twn).txt (Pirate English)

* New translations installing-boot9strap-(kartdlphax).txt (Pirate English)

* New translations installing-boot9strap-(pichaxx).txt (Pirate English)

* New translations installing-boot9strap-(usm).txt (Pirate English)

* New translations seedminer.txt (Pirate English)

* New translations installing-boot9strap-(fredtool).txt (Pirate English)

* New translations installing-boot9strap-(usm).txt (Thai)

* New translations installing-boot9strap-(pichaxx).txt (Thai)

* New translations installing-boot9strap-(kartdlphax).txt (Croatian)

* New translations installing-boot9strap-(kartdlphax).txt (Thai)

* New translations bannerbomb3-fredtool-(twn).txt (Thai)

* New translations installing-boot9strap-(fredtool).txt (Croatian)

* New translations seedminer.txt (Croatian)

* New translations installing-boot9strap-(usm).txt (Croatian)

* New translations installing-boot9strap-(pichaxx).txt (Croatian)

* New translations bannerbomb3-fredtool-(twn).txt (Croatian)

* New translations installing-boot9strap-(fredtool).txt (Malay)

* New translations seedminer.txt (Malay)

* New translations installing-boot9strap-(usm).txt (Malay)

* New translations installing-boot9strap-(pichaxx).txt (Malay)

* New translations installing-boot9strap-(kartdlphax).txt (Malay)

* New translations bannerbomb3-fredtool-(twn).txt (Malay)

* New translations bannerbomb3.txt (Spanish)

* New translations bannerbomb3.txt (Romanian)

* New translations bannerbomb3.txt (French)

* New translations bannerbomb3.txt (Bulgarian)

* New translations bannerbomb3.txt (Arabic)

* New translations bannerbomb3.txt (Czech)

* New translations bannerbomb3.txt (Catalan)

* New translations bannerbomb3.txt (German)

* New translations bannerbomb3.txt (Finnish)

* New translations bannerbomb3.txt (Greek)

* New translations bannerbomb3.txt (Hungarian)

* New translations bannerbomb3.txt (Hebrew)

* New translations bannerbomb3.txt (Korean)

* New translations bannerbomb3.txt (Italian)

* New translations bannerbomb3.txt (Japanese)

* New translations bannerbomb3.txt (Polish)

* New translations bannerbomb3.txt (Dutch)

* New translations bannerbomb3.txt (Norwegian)

* New translations bannerbomb3.txt (Russian)

* New translations bannerbomb3.txt (Portuguese)

* New translations bannerbomb3.txt (Turkish)

* New translations bannerbomb3.txt (Swedish)

* New translations bannerbomb3.txt (Ukrainian)

* New translations bannerbomb3.txt (Chinese Traditional)

* New translations bannerbomb3.txt (Chinese Simplified)

* New translations bannerbomb3.txt (Portuguese, Brazilian)

* New translations bannerbomb3.txt (Vietnamese)

* New translations bannerbomb3.txt (Thai)

* New translations bannerbomb3.txt (Croatian)

* New translations bannerbomb3.txt (Indonesian)

* New translations bannerbomb3.txt (Pirate English)

* New translations bannerbomb3.txt (Malay)

* New translations bannerbomb3-fredtool-(twn).txt (Italian)

* New translations faq.txt (Italian)

* New translations get-started.txt (Italian)

* New translations home.txt (Italian)

* New translations seedminer.txt (Italian)

* New translations installing-boot9strap-(usm).txt (Italian)

* New translations installing-boot9strap-(pichaxx).txt (Italian)

* New translations installing-boot9strap-(kartdlphax).txt (Italian)

* New translations faq.txt (Chinese Simplified)

* New translations get-started.txt (Chinese Simplified)

* New translations home.txt (Chinese Simplified)

* New translations seedminer.txt (Chinese Simplified)

* New translations installing-boot9strap-(usm).txt (Chinese Simplified)

* New translations installing-boot9strap-(pichaxx).txt (Chinese Simplified)

* New translations installing-boot9strap-(kartdlphax).txt (Chinese Simplified)

* New translations bannerbomb3-fredtool-(twn).txt (Chinese Simplified)

* New translations faq.txt (Hungarian)

* New translations get-started.txt (Hungarian)

* New translations home.txt (Hungarian)

* New translations seedminer.txt (Hungarian)

* New translations installing-boot9strap-(usm).txt (Hungarian)

* New translations installing-boot9strap-(pichaxx).txt (Hungarian)

* New translations installing-boot9strap-(kartdlphax).txt (Hungarian)

* New translations bannerbomb3-fredtool-(twn).txt (Hungarian)
This commit is contained in:
ihaveahax 2022-08-30 08:17:19 -07:00 committed by GitHub
parent 7d27f2c9b8
commit 15ad9e5ced
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
296 changed files with 1144 additions and 857 deletions

View file

@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
{: .notice--warning}
### What you need

View file

@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
{: ..notice--warning}
{: .notice--warning}
### What You Need

View file

@ -4,11 +4,12 @@ title: "FAQ"
{% include toc title="Table of Contents"%}
{% capture notice-6 %}
**The latest 3DS firmware is 11.15.0**. Here's what you should know:
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update.
- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0.
- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier.
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
@ -16,7 +17,7 @@ title: "FAQ"
## Pre-Installation FAQ
#### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?*
**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer).
**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer).
#### **Q:** *What devices is this guide compatible with?*
**A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit.

View file

@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
#### Section II - System Version Check
1. Open the System Settings application
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U")
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U")
#### Section III - Select a Method
Use the version table below to select a method. A few things to note:
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between.
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between.
+ Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax.
+ The number and letter after the system version are not important.
+ No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware).
@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note:
</thead>
<tbody>
<tr>
<td style="text-align: center; font-weight: bold;">11.15.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;">11.16.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
</tr>
<tr>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.14.0</td>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.15.0</td>
<td style="text-align: center; font-weight: bold;">Update your 3DS to the latest version through System Settings</td>
</tr>
<tr>
@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above.
Otherwise, methods that work on all versions are available, but require additional hardware:
1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7
1. [ntrboot](ntrboot) - requires compatible DS flashcart
1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering

View file

@ -9,6 +9,17 @@ header:
excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
---
{% capture notice-6 %}
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
Thoroughly read all of the introductory pages (including this one!) before proceeding.
{: .notice--info}

View file

@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices.
In order to follow these instructions, you will need the following:

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller.
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it.

View file

@ -59,25 +59,14 @@ ___
### Next Steps
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below.
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS.
#### PicHaxx + universal-otherapp (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware.
This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN.
Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx))
{: .notice--primary}
#### Installing boot9strap (unSAFE_MODE)
#### unSAFE_MODE (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units.
This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--warning}
{: .notice--primary}
___

View file

@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
{: .notice--warning}
### What you need

View file

@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
{: ..notice--warning}
{: .notice--warning}
### What You Need

View file

@ -4,11 +4,12 @@ title: "FAQ"
{% include toc title="Table of Contents"%}
{% capture notice-6 %}
**The latest 3DS firmware is 11.15.0**. Here's what you should know:
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update.
- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0.
- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier.
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
@ -16,7 +17,7 @@ title: "FAQ"
## Pre-Installation FAQ
#### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?*
**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer).
**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer).
#### **Q:** *What devices is this guide compatible with?*
**A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit.

View file

@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
#### Section II - System Version Check
1. Open the System Settings application
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U")
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U")
#### Section III - Select a Method
Use the version table below to select a method. A few things to note:
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between.
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between.
+ Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax.
+ The number and letter after the system version are not important.
+ No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware).
@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note:
</thead>
<tbody>
<tr>
<td style="text-align: center; font-weight: bold;">11.15.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;">11.16.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
</tr>
<tr>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.14.0</td>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.15.0</td>
<td style="text-align: center; font-weight: bold;">Update your 3DS to the latest version through System Settings</td>
</tr>
<tr>
@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above.
Otherwise, methods that work on all versions are available, but require additional hardware:
1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7
1. [ntrboot](ntrboot) - requires compatible DS flashcart
1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering

View file

@ -9,6 +9,17 @@ header:
excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
---
{% capture notice-6 %}
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
Thoroughly read all of the introductory pages (including this one!) before proceeding.
{: .notice--info}

View file

@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices.
In order to follow these instructions, you will need the following:

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller.
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it.

View file

@ -59,25 +59,14 @@ ___
### Next Steps
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below.
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS.
#### PicHaxx + universal-otherapp (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware.
This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN.
Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx))
{: .notice--primary}
#### Installing boot9strap (unSAFE_MODE)
#### unSAFE_MODE (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units.
This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--warning}
{: .notice--primary}
___

View file

@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
{: .notice--warning}
### What you need

View file

@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
{: ..notice--warning}
{: .notice--warning}
### What You Need

View file

@ -4,11 +4,12 @@ title: "FAQ"
{% include toc title="Table of Contents"%}
{% capture notice-6 %}
**The latest 3DS firmware is 11.15.0**. Here's what you should know:
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update.
- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0.
- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier.
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
@ -16,7 +17,7 @@ title: "FAQ"
## Pre-Installation FAQ
#### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?*
**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer).
**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer).
#### **Q:** *What devices is this guide compatible with?*
**A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit.

View file

@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
#### Section II - System Version Check
1. Open the System Settings application
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U")
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U")
#### Section III - Select a Method
Use the version table below to select a method. A few things to note:
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between.
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between.
+ Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax.
+ The number and letter after the system version are not important.
+ No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware).
@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note:
</thead>
<tbody>
<tr>
<td style="text-align: center; font-weight: bold;">11.15.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;">11.16.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
</tr>
<tr>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.14.0</td>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.15.0</td>
<td style="text-align: center; font-weight: bold;">Update your 3DS to the latest version through System Settings</td>
</tr>
<tr>
@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above.
Otherwise, methods that work on all versions are available, but require additional hardware:
1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7
1. [ntrboot](ntrboot) - requires compatible DS flashcart
1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering

View file

@ -9,6 +9,17 @@ header:
excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
---
{% capture notice-6 %}
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
Thoroughly read all of the introductory pages (including this one!) before proceeding.
{: .notice--info}

View file

@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices.
In order to follow these instructions, you will need the following:

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller.
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it.

View file

@ -59,25 +59,14 @@ ___
### Next Steps
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below.
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS.
#### PicHaxx + universal-otherapp (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware.
This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN.
Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx))
{: .notice--primary}
#### Installing boot9strap (unSAFE_MODE)
#### unSAFE_MODE (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units.
This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--warning}
{: .notice--primary}
___

View file

@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
{: .notice--warning}
### What you need

View file

@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
{: ..notice--warning}
{: .notice--warning}
### What You Need

View file

@ -4,11 +4,12 @@ title: "FAQ"
{% include toc title="Table of Contents"%}
{% capture notice-6 %}
**The latest 3DS firmware is 11.15.0**. Here's what you should know:
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update.
- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0.
- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier.
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
@ -16,7 +17,7 @@ title: "FAQ"
## Pre-Installation FAQ
#### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?*
**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer).
**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer).
#### **Q:** *What devices is this guide compatible with?*
**A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit.

View file

@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
#### Section II - System Version Check
1. Open the System Settings application
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U")
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U")
#### Section III - Select a Method
Use the version table below to select a method. A few things to note:
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between.
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between.
+ Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax.
+ The number and letter after the system version are not important.
+ No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware).
@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note:
</thead>
<tbody>
<tr>
<td style="text-align: center; font-weight: bold;">11.15.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;">11.16.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
</tr>
<tr>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.14.0</td>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.15.0</td>
<td style="text-align: center; font-weight: bold;">Update your 3DS to the latest version through System Settings</td>
</tr>
<tr>
@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above.
Otherwise, methods that work on all versions are available, but require additional hardware:
1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7
1. [ntrboot](ntrboot) - requires compatible DS flashcart
1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering

View file

@ -9,6 +9,17 @@ header:
excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
---
{% capture notice-6 %}
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
Thoroughly read all of the introductory pages (including this one!) before proceeding.
{: .notice--info}

View file

@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices.
In order to follow these instructions, you will need the following:

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller.
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it.

View file

@ -59,25 +59,14 @@ ___
### Next Steps
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below.
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS.
#### PicHaxx + universal-otherapp (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware.
This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN.
Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx))
{: .notice--primary}
#### Installing boot9strap (unSAFE_MODE)
#### unSAFE_MODE (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units.
This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--warning}
{: .notice--primary}
___

View file

@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
{: .notice--warning}
### What you need

View file

@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
{: ..notice--warning}
{: .notice--warning}
### Was du brauchst

View file

@ -4,11 +4,12 @@ title: "FAQ"
{% include toc title="Table of Contents"%}
{% capture notice-6 %}
**The latest 3DS firmware is 11.15.0**. Here's what you should know:
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update.
- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0.
- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier.
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
@ -16,7 +17,7 @@ title: "FAQ"
## Pre-Installation FAQ
#### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?*
** A: ** Ja! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer).
** A: ** Ja! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer).
#### **Q:** *What devices is this guide compatible with?*
**A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit.

View file

@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
#### Section II - System Version Check
1. Open the System Settings application
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U")
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U")
#### Section III - Select a Method
Use the version table below to select a method. A few things to note:
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between.
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between.
+ Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax.
+ The number and letter after the system version are not important.
+ No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware).
@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note:
</thead>
<tbody>
<tr>
<td style="text-align: center; font-weight: bold;">11.15.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;">11.16.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
</tr>
<tr>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.14.0</td>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.15.0</td>
<td style="text-align: center; font-weight: bold;">Update your 3DS to the latest version through System Settings</td>
</tr>
<tr>
@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above.
Otherwise, methods that work on all versions are available, but require additional hardware:
1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7
1. [ntrboot](ntrboot) - requires compatible DS flashcart
1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering

View file

@ -9,6 +9,17 @@ header:
excerpt: "Eine vollständige Anleitung für 3DS Custom Firmware, <br />von original zu boot9strap.<br />" #
---
{% capture notice-6 %}
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
Lies alle Einleitungsseiten gründlich durch (einschließlich dieser), bevor du fortfährst.
{: .notice--info}

View file

@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
Dies ist eine zurzeit funktionierende Implementation des "FIRM Partitions Known-Plaintext"-Exploits. Details findest du [hier](https://www.3dbrew.org/wiki/3DS_System_Flaws).

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices.
In order to follow these instructions, you will need the following:

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller.
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it.

View file

@ -59,25 +59,14 @@ ___
### Next Steps
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below.
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS.
#### PicHaxx + universal-otherapp (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware.
This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN.
Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx))
{: .notice--primary}
#### Installing boot9strap (unSAFE_MODE)
#### unSAFE_MODE (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units.
This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--warning}
{: .notice--primary}
___

View file

@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
{: .notice--warning}
### What you need

View file

@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
{: ..notice--warning}
{: .notice--warning}
### What You Need

View file

@ -4,11 +4,12 @@ title: "FAQ"
{% include toc title="Table of Contents"%}
{% capture notice-6 %}
**The latest 3DS firmware is 11.15.0**. Here's what you should know:
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update.
- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0.
- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier.
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
@ -16,7 +17,7 @@ title: "FAQ"
## Pre-Installation FAQ
#### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?*
**Α:** Ναι! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer).
**Α:** Ναι! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer).
#### **Q:** *What devices is this guide compatible with?*
**A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit.

View file

@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
#### Section II - System Version Check
1. Open the System Settings application
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U")
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U")
#### Section III - Select a Method
Use the version table below to select a method. A few things to note:
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between.
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between.
+ Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax.
+ The number and letter after the system version are not important.
+ No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware).
@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note:
</thead>
<tbody>
<tr>
<td style="text-align: center; font-weight: bold;">11.15.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;">11.16.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
</tr>
<tr>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.14.0</td>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.15.0</td>
<td style="text-align: center; font-weight: bold;">Update your 3DS to the latest version through System Settings</td>
</tr>
<tr>
@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above.
Otherwise, methods that work on all versions are available, but require additional hardware:
1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7
1. [ntrboot](ntrboot) - requires compatible DS flashcart
1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering

View file

@ -9,6 +9,17 @@ header:
excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
---
{% capture notice-6 %}
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
Thoroughly read all of the introductory pages (including this one!) before proceeding.
{: .notice--info}

View file

@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices.
In order to follow these instructions, you will need the following:

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller.
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it.

View file

@ -59,25 +59,14 @@ ___
### Next Steps
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below.
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS.
#### PicHaxx + universal-otherapp (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware.
This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN.
Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx))
{: .notice--primary}
#### Installing boot9strap (unSAFE_MODE)
#### unSAFE_MODE (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units.
This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--warning}
{: .notice--primary}
___

View file

@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
{: .notice--warning}
### What you need

View file

@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
{: ..notice--warning}
{: .notice--warning}
### What You Need

View file

@ -4,11 +4,12 @@ title: "FAQ"
{% include toc title="Table of Contents"%}
{% capture notice-6 %}
**The latest 3DS firmware is 11.15.0**. Here's what you should know:
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update.
- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0.
- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier.
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
@ -16,7 +17,7 @@ title: "FAQ"
## Pre-Installation FAQ
#### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?*
**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer).
**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer).
#### **Q:** *What devices is this guide compatible with?*
**A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit.

View file

@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
#### Section II - System Version Check
1. Open the System Settings application
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U")
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U")
#### Section III - Select a Method
Use the version table below to select a method. A few things to note:
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between.
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between.
+ Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax.
+ The number and letter after the system version are not important.
+ No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware).
@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note:
</thead>
<tbody>
<tr>
<td style="text-align: center; font-weight: bold;">11.15.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;">11.16.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
</tr>
<tr>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.14.0</td>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.15.0</td>
<td style="text-align: center; font-weight: bold;">Update your 3DS to the latest version through System Settings</td>
</tr>
<tr>
@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above.
Otherwise, methods that work on all versions are available, but require additional hardware:
1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7
1. [ntrboot](ntrboot) - requires compatible DS flashcart
1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering

View file

@ -9,6 +9,17 @@ header:
excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
---
{% capture notice-6 %}
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
Thoroughly read all 'o th' introductory pages (includin' 'tis one!) before proceedin' onward.
{: .notice--info}

View file

@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices.
In order to follow these instructions, you will need the following:

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)"
### Required Reading
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller.
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it.

View file

@ -59,25 +59,14 @@ ___
### Next Steps
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below.
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS.
#### PicHaxx + universal-otherapp (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware.
This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN.
Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx))
{: .notice--primary}
#### Installing boot9strap (unSAFE_MODE)
#### unSAFE_MODE (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units.
This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--warning}
{: .notice--primary}
___

View file

@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
{: .notice--warning}
### What you need

View file

@ -13,7 +13,7 @@ Para lograrlo, usamos la clave de cifrado de tu sistema (movable.sed) para crear
Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y Corea, indicado por las letras U, E, J o K después de la versión del sistema.
If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
{: ..notice--warning}
{: .notice--warning}
### Qué necesitas

View file

@ -4,11 +4,12 @@ title: "Preguntas Frecuentes"
{% include toc title="Tabla de Contenidos"%}
{% capture notice-6 %}
**The latest 3DS firmware is 11.15.0**. Esto es lo que deberías saber:
**3DS firmware 11.16.0 was recently released**. Esto es lo que deberías saber:
- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update.
Si tu consola tiene una versión antigua de Luma, debes [actualizar Luma] (restaurando-actualizando-cfw) antes de actualizar tu consola a 11.15.0.
No se conoce que algún título hombrew haya sido afectado por esta actualización. They will work as they did on 11.14.0 and earlier.
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
@ -16,7 +17,7 @@ No se conoce que algún título hombrew haya sido afectado por esta actualizaci
## Pre-Installation FAQ
#### **Q:** *I am on the latest system version. ¿Es mi consola hackeable sin ningún hardware externo?*
**R:** ¡Sí! El último firmware (11.15.0) tiene un método gratis para conseguir CFW llamado [Seedminer](seedminer).
**R:** ¡Sí! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer).
#### **Q:** *What devices is this guide compatible with?*
**R:** Las instrucciones son las mismas para todas las consolas 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, y New 2DS XL de venta en tiendas. Si la versión del sistema se muestra como "0.0.0-0", entonces podrías tener una unidad de desarrollador.

View file

@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
#### Section II - System Version Check
1. Ve a Configuración de la Consola
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U")
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U")
#### Section III - Select a Method
Use the version table below to select a method. A few things to note:
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between.
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between.
+ Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax.
+ The number and letter after the system version are not important.
+ No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware).
@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note:
</thead>
<tbody>
<tr>
<td style="text-align: center; font-weight: bold;">11.15.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;">11.16.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
</tr>
<tr>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.14.0</td>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.15.0</td>
<td style="text-align: center; font-weight: bold;">Actualiza tu 3DS a la última versión a través de la aplicación Configuración de la consola</td>
</tr>
<tr>
@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above.
Otherwise, methods that work on all versions are available, but require additional hardware:
1. [Instalar boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requiere una 3DS con custom firmware y una copia de Mario Kart 7
1. [ntrboot](ntrboot) - requiere una flashcart de DS compatible
1. [Instalación de boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requiere hacer soldaduras

View file

@ -9,6 +9,17 @@ header:
excerpt: "Una guía completa de custom firmware para 3DS, <br /> desde stock a boot9strap.<br />"
---
{% capture notice-6 %}
**3DS firmware 11.16.0 was recently released**. Esto es lo que deberías saber:
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
Lee detenidamente todas las páginas de introducción (incluido ésta) antes de proceder.
{: .notice--info}

View file

@ -6,6 +6,9 @@ title: "Instalar Boot9strap (Fredtool)"
### Lectura requerida
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
Este método de uso de Seedminer, para hacer un mejor exploit, utiliza tu archivo `movable.sed` para desencriptar cualquier título de DSiWare con el objetivo de inyectar un título de DSiWare vulnerable en la aplicación de Configuración de Internet de DS. Esto requiere que tengas una copia de seguridad de un título de DSiWare, por ejemplo, el proveniente de BannerBomb o la herramienta DSiWare Dumper.
Todo esto son implementaciones funcionales del exploit "Particiones FIRM de texto plano conocido" detallado [aquí](https://www.3dbrew.org/wiki/3DS_System_Flaws) (*en inglés*).

View file

@ -6,6 +6,9 @@ title: "Instalar boot9strap (kartdlphax)"
### Lectura requerida
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
kartdlphax es un exploit para el Modo Descarga de Mario Kart 7. Se puede utilizar junto con universal-otherapp para instalar custom firmware en otras consolas.
Para seguir estas instrucciones, necesitarás lo siguiente:

View file

@ -6,6 +6,9 @@ title: "Instalar boot9strap (PicHaxx)"
### Lectura requerida
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
Este método que emplea Seedminer para mayor acceso utiliza tu archivo `movable.sed` para generar un archivo de guardado personalizado para Pokémon Picross, el cual puede ser usado en conjunto con universal-otherapp para ejecutar SafeB9SInstaller.
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it.

View file

@ -16,7 +16,7 @@ Una vez que el perfil de WiFi ha sido inyectado, usaremos SAFE_MODE, que consist
Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y Corea, indicado por las letras U, E, J o K después de la versión del sistema.
If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). Para ayuda con este asunto, únete al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) donde puedes pedir, en inglés, que te ayuden.
If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
### Qué necesitas

View file

@ -59,25 +59,14 @@ ___
### Next Steps
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below.
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS.
#### PicHaxx + universal-otherapp (Recomendado)
Este método que emplea Seedminer para mayor acceso utiliza tu archivo `movable.sed` para generar un archivo de guardado personalizado para Pokémon Picross, el cual puede ser usado en conjunto con universal-otherapp para instalar custom firmware.
Esta ruta requiere la aplicación Pokémon Picross (Gratis en la eShop), y por lo tanto requiere acceso a la eShop y una 3DS con una región de USA, EUR o JPN.
Continúa a [Instalar Boot9strap (PicHaxx)](installing-boot9strap-(pichaxx))
{: .notice--primary}
#### Instalar boot9strap (unSAFE_MODE)
#### unSAFE_MODE (Recommended)
Éste método que emplea Seedminer para mayor acceso utiliza tu archivo `movable.sed` para tomar ventaja de exploits en el firmware SAFE_MODE presente en todas las consolas 3DS.
This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS.
Continúa a [Instalar boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--warning}
{: .notice--primary}
___

View file

@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
{: .notice--warning}
### What you need

View file

@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
{: ..notice--warning}
{: .notice--warning}
### Tarpeet

View file

@ -4,11 +4,12 @@ title: "UKK"
{% include toc title="Table of Contents"%}
{% capture notice-6 %}
**The latest 3DS firmware is 11.15.0**. Here's what you should know:
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update.
- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0.
- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier.
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
@ -16,7 +17,7 @@ title: "UKK"
## Pre-Installation FAQ
#### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?*
**V:** Kyllä! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer).
**V:** Kyllä! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer).
#### **Q:** *What devices is this guide compatible with?*
**A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit.

View file

@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
#### Section II - System Version Check
1. Open the System Settings application
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U")
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U")
#### Section III - Select a Method
Use the version table below to select a method. A few things to note:
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between.
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between.
+ Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax.
+ The number and letter after the system version are not important.
+ No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware).
@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note:
</thead>
<tbody>
<tr>
<td style="text-align: center; font-weight: bold;">11.15.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;">11.16.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
</tr>
<tr>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.14.0</td>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.15.0</td>
<td style="text-align: center; font-weight: bold;">Update your 3DS to the latest version through System Settings</td>
</tr>
<tr>
@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above.
Otherwise, methods that work on all versions are available, but require additional hardware:
1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7
1. [ntrboot](ntrboot) - requires compatible DS flashcart
1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering

View file

@ -9,6 +9,17 @@ header:
excerpt: "Perusteellinen opas 3DS:n mukautettuun laiteohjelmistoon, <br /> vakio-ohjelmistosta boot9strapiin.<br />"
---
{% capture notice-6 %}
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
Lue huolellisesti kaikki johdantosivut (mukaan lukien tämä!) ennen aloittamista.
{: .notice--info}

View file

@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)"
### Tärkeää tietoa
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
Tämä menetelmä käyttää FIRM-osioiden salaamatonta muotoa (known-plaintext, selitetty [täällä](https://www.3dbrew.org/wiki/3DS_System_Flaws)) hyödyntävää haavoittuvuutta.

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)"
### Tärkeää tietoa
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices.
In order to follow these instructions, you will need the following:

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)"
### Tärkeää tietoa
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller.
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it.

View file

@ -59,25 +59,14 @@ ___
### Next Steps
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below.
Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS.
#### PicHaxx + universal-otherapp (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware.
This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN.
Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx))
{: .notice--primary}
#### Installing boot9strap (unSAFE_MODE)
#### unSAFE_MODE (Recommended)
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units.
This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--warning}
{: .notice--primary}
___

View file

@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
{: .notice--warning}
### What you need

View file

@ -13,7 +13,7 @@ Pour accomplir cela, nous utilisons la clé de chiffrement de votre console (mov
Ces instructions fonctionnent dans les régions USA, Europe, Japon et Corée indiquées par les lettres U, E, J ou K après le numéro de version de la console.
If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
{: ..notice--warning}
{: .notice--warning}
### Ce dont vous avez besoin

View file

@ -4,11 +4,12 @@ title: "FAQ"
{% include toc title="Table of Contents"%}
{% capture notice-6 %}
**The latest 3DS firmware is 11.15.0**. Voici ce que vous devriez savoir :
**3DS firmware 11.16.0 was recently released**. Voici ce que vous devriez savoir :
- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update.
- Si votre appareil est sur une version de Luma plus ancienne, vous devriez [mettre à jour Luma](restoring-updating-cfw) avant de mettre à jour votre appareil vers la 11.15.0.
- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier.
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
@ -16,7 +17,7 @@ title: "FAQ"
## Pre-Installation FAQ
#### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?*
**R :** Oui ! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer).
**R :** Oui ! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer).
#### **Q:** *What devices is this guide compatible with?*
**A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit.

View file

@ -19,12 +19,12 @@ Si vous voyez un menu inhabituel, STOP - vous avez déjà un custom firmware ! C
#### Section II - Vérification de la version du logiciel système
1. Ouvrez l'application Paramètres de la console
1. La version de votre logiciel système sera affichée en bas à droite de l'écran supérieur (par ex. "Ver. 11.15.0-47U")
1. La version de votre logiciel système sera affichée en bas à droite de l'écran supérieur (par ex. "Ver. 11.16.0-48U")
#### Section III Sélectionner une méthode
Utilisez le tableau des versions ci-dessous pour sélectionner une méthode. Quelques points à noter :
+ Le tableau des versions ci-dessous est *inclusif*. Par exemple, "de 11.4.0 à 11.14.0" inclut 11.4.0, 11.14.0 et toutes les versions intermédiaires.
+ Le tableau des versions ci-dessous est *inclusif*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between.
+ Les versions logicielles ne fonctionnent pas de la même manière que les décimales. Les versions 11.10.0 et supérieures sont plus récentes que 11.3.0 et ne sont donc pas compatibles avec Soundhax.
+ Le chiffre et la lettre après la version du logiciel système ne sont pas importants.
+ Peu importe la méthode que vous suivez, le résultat final est le même (configuration du custom firmware boot9strap + Luma3DS sur la dernière version du logiciel système).
@ -42,11 +42,11 @@ Utilisez le tableau des versions ci-dessous pour sélectionner une méthode. Que
</thead>
<tbody>
<tr>
<td style="text-align: center; font-weight: bold;">11.15.0 (dernière version)</td>
<td style="text-align: center; font-weight: bold;">11.16.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
</tr>
<tr>
<td style="text-align: center; font-weight: bold;">11.4.0 à 11.14.0</td>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.15.0</td>
<td style="text-align: center; font-weight: bold;">Mettez à jour votre 3DS vers la dernière version depuis les Paramètres de la console</td>
</tr>
<tr>
@ -63,6 +63,5 @@ Si possible, vous devriez suivre l'une des méthodes logicielles répertoriées
Sinon, des méthodes qui fonctionnent sur toutes les versions sont disponibles, mais nécessitent du matériel supplémentaire :
1. [Installer boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requiert une 3DS avec un custom firmware et une copie de Mario Kart 7
1. [ntrboot](ntrboot) - nécessite un linker DS compatible
1. [Installation de boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - nécessite de faire de la soudure

View file

@ -9,6 +9,17 @@ header:
excerpt: "Un guide complet pour le custom firmware de 3DS, <br /> depuis le firmware original vers boot9strap.<br />"
---
{% capture notice-6 %}
**3DS firmware 11.16.0 was recently released**. Voici ce que vous devriez savoir :
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
Lisez attentivement toutes les pages d'introduction (y compris celle-ci !) avant de continuer.
{: .notice--info}

View file

@ -6,6 +6,9 @@ title: "Installation de Boot9strap (Fredtool)"
### Lecture requise
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
Cette méthode d'utilisation de Seedminer pour une exploitation ultérieure utilise votre fichier `movable.sed` pour déchiffrer n'importe quel titre DSiWare afin d'injecter un titre DSiWare exploitable dans l'application Connexions Nintendo DS. Cela nécessite d'avoir une sauvegarde d'un DSiWare, par exemple à partir de BannerBomb ou de l'outil DSiWare Dumper.
Ceci est une implémentation de l'exploit "FIRM partitions known-plaintext" qui est décrit [ici](https://www.3dbrew.org/wiki/3DS_System_Flaws).

View file

@ -6,6 +6,9 @@ title: "Installation de boot9strap (kartdlphax)"
### Lecture requise
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
kartdlphax est un exploit pour le mode Téléchargement de Mario Kart 7. Il peut être utilisé avec universal-otherapp pour installer un firmware custom sur les consoles cibles.
Pour suivre ces instructions, vous aurez besoin de ceci :

View file

@ -6,6 +6,9 @@ title: "Installation de boot9strap (PicHaxx)"
### Lecture requise
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
Cette méthode d'utilisation de Seedminer pour une exploitation plus poussée utilise votre fichier `movable.sed` pour écrire un fichier de sauvegarde modifié pour Pokémon Picross, qui peut ensuite être utilisé avec universal-otherapp pour exécuter SafeB9SInstaller.
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it.

View file

@ -16,7 +16,7 @@ Une fois le profil WiFi injecté, nous utiliserons SAFE_MODE, qui est une foncti
Ces instructions fonctionnent dans les régions USA, Europe, Japon et Corée indiquées par les lettres U, E, J ou K après le numéro de version de la console.
If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). Pour obtenir de l'aide, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez de l'aide en anglais.
If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
## Ce dont vous avez besoin

View file

@ -59,31 +59,20 @@ ___
### Prochaînes étapes
Une fois que vous avez la clé de chiffrement de votre console (`movable.sed`), vous l'utiliserez en conjonction avec d'autres exploits pour installer un custom firmware sur votre 3DS. Sélectionnez un exploit ci-dessous.
Une fois que vous avez la clé de chiffrement de votre console (`movable.sed`), vous l'utiliserez en conjonction avec d'autres exploits pour installer un custom firmware sur votre 3DS.
#### PicHaxx + universal-otherapp (Recommandé)
Cette méthode d'utilisation de Seedminer pour une exploitation plus poussée utilise votre fichier `movable.sed` pour écrire un fichier de sauvegarde modifié pour Pokémon Picross, qui peut ensuite être utilisé avec universal-otherapp pour installer le custom firmware.
Cette méthode requiert l'application Pokémon Picross (gratuit sur eShop), et nécessite donc un accès à l'eShop et une 3DS avec une région USA, EUR, ou JPN.
Continuer vers [Installation de boot9strap (PicHaxx)](installing-boot9strap-(pichaxx))
{: .notice--primary}
#### Installation de boot9strap (unSAFE_MODE)
#### unSAFE_MODE (Recommended)
Cette méthode d'utilisation de Seedminer pour une exploitation plus poussée utilise votre fichier `movable.sed` pour tirer parti d'exploits du firmware SAFE_MODE présent sur toutes les consoles 3DS.
Cette route n'est recommandée que si vous êtes, pour une raison quelconque, incapable d'utiliser la méthode PicHaxx + universal-otherapp, si vous n'avez pas d'accès à l'eShop ou vous utilisez une 3DS coréenne.
Continuer vers [Installation de boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--warning}
{: .notice--primary}
___
#### Uniquement pour les consoles Taïwanaises
#### Taiwan consoles only
Si vous avez une console taïwanaise (indiqué avec un T à la fin de la version système, tel que 11.15.0-39**T**), vous devez utiliser cette méthode. **Si votre console n'est pas de cette région, n'utilisez pas cette méthode.**
If you have a Taiwanese device (indicated with a T at the end of the system version, such as 11.15.0-39**T**), you must follow this route. **Other regions may not follow this route.**
Continuer vers [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn))
Continue to [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn))
{: .notice--warning}

View file

@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
{: .notice--warning}
### What you need

View file

@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
{: ..notice--warning}
{: .notice--warning}
### What You Need

View file

@ -4,11 +4,12 @@ title: "שאלות ותשובות"
{% include toc title="Table of Contents"%}
{% capture notice-6 %}
**The latest 3DS firmware is 11.15.0**. Here's what you should know:
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update.
- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0.
- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier.
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
@ -16,7 +17,7 @@ title: "שאלות ותשובות"
## Pre-Installation FAQ
#### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?*
**תשובה:** כן! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer).
**תשובה:** כן! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer).
#### **Q:** *What devices is this guide compatible with?*
**A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit.

View file

@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
#### Section II - System Version Check
1. Open the System Settings application
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U")
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U")
#### Section III - Select a Method
Use the version table below to select a method. A few things to note:
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between.
+ The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between.
+ Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax.
+ The number and letter after the system version are not important.
+ No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware).
@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note:
</thead>
<tbody>
<tr>
<td style="text-align: center; font-weight: bold;">11.15.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;">11.16.0 (latest version)</td>
<td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
</tr>
<tr>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.14.0</td>
<td style="text-align: center; font-weight: bold;">11.4.0 to 11.15.0</td>
<td style="text-align: center; font-weight: bold;">Update your 3DS to the latest version through System Settings</td>
</tr>
<tr>
@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above.
Otherwise, methods that work on all versions are available, but require additional hardware:
1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7
1. [ntrboot](ntrboot) - requires compatible DS flashcart
1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering

View file

@ -9,6 +9,17 @@ header:
excerpt: "מדריך שלם לפריצת 3DS, <br /> מהחנות עד ל boot9strap.<br />"
---
{% capture notice-6 %}
**3DS firmware 11.16.0 was recently released**. Here's what you should know:
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0.
- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
{% endcapture %}
<div class="notice--warning">{{ notice-6 | markdownify }}</div>
תקראו ביסודיות את כל הדפים המקדימים (כולל את זה!) לפני שאתם ממשיכים.
{: .notice--info}

View file

@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)"
### קריאה דרושה
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
זה כרגע יישום עובד של הפירצה "PLAINTEXT ידוע למחיצת הFIRM" עם הסבר [כאן](https://www.3dbrew.org/wiki/3DS_System_Flaws).

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)"
### קריאה דרושה
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices.
In order to follow these instructions, you will need the following:

View file

@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)"
### קריאה דרושה
The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller.
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it.

Some files were not shown because too many files have changed in this diff Show more