kartdlphax: inline USM includes, only used here now

_pages/en_US/include/exploit-usm.txt

@@ -1,14 +0,0 @@
-In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
-
-1. With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
-    + Keep holding the buttons until the console boots into Safe Mode (a "system update" menu)
-1. Press "OK" to accept the update
-    + There is no update. This is part of the exploit
-1. Press "I accept" to accept the terms and conditions
-1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
-1. When asked "Would you like to configure Internet settings?", select "Yes"
-1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
-1. If the exploit was successful, your console will have booted into SafeB9SInstaller
-    + If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
-    + If your console instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
-    + If you get a different error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-usm)

_pages/en_US/include/remove-usm-slottool.txt

@@ -1,17 +0,0 @@
-In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
-
-1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
-1. Wait until you see the two buttons
-    + Do not press either of the buttons
-1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
-1. Select "Miscellaneous options"
-1. Select "Switch the hb. title to the current app."
-1. Press (B) to continue
-1. Press (B) to return to the Rosalina main menu
-1. Press (B) to exit the Rosalina menu
-1. Press (Home), then close Download Play
-1. Relaunch the Download Play application
-1. Your console should load the Homebrew Launcher
-1. Launch slotTool from the list of homebrew
-1. Select "RESTORE original wifi slots 1,2,3"
-1. Your console will then reboot

_pages/en_US/installing-boot9strap-(kartdlphax).txt

@@ -113,7 +113,20 @@ You will **not** need to use your **source 3DS** to complete any further steps o
 
 #### Section V - unSAFE_MODE
 
-{% include_relative include/exploit-usm.txt %}
+In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
+    + Keep holding the buttons until the console boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+    + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
+1. If the exploit was successful, your console will have booted into SafeB9SInstaller
+    + If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+    + If your console instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
+    + If you get a different error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-usm)
 
 #### Section VI - Installing boot9strap
 
@@ -124,7 +137,12 @@ You will **not** need to use your **source 3DS** to complete any further steps o
 
 #### Section VII - Restoring WiFi Configuration Profiles
 
-{% include_relative include/remove-usm-slottool.txt %}
+In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
+
+{% include_relative include/launch-hbl-dlp.txt %}
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your console will then reboot
 
 ___