New Crowdin translations (#1335)

_pages/af_ZA/a9lh-to-b9s.txt

@@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VIII - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Scripts..."

_pages/af_ZA/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}
 

_pages/af_ZA/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_!    
 If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide).
@@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to
 This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents!
 {: .notice--success}
 
-Read all of the introductory pages before proceeding.
-{: .notice--warning}
-
 ## What is Homebrew?
 
 [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems.

_pages/af_ZA/homebrew-launcher-(alternatives).txt

@@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 #### What you need
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Power off your device
 1. Insert your SD card into your computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher:

_pages/af_ZA/homebrew-launcher-(soundhax).txt

@@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo
 #### What you need
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Power off your device
 1. Insert your SD card into your computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the Soundhax `.m4a` to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Launch Nintendo 3DS Sound

_pages/af_ZA/updating-b9s.txt

@@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card.
 
 ##### Section III - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Launch GodMode9 by holding (Start) during boot
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. Press (Home) to bring up the action menu

_pages/ar_SA/a9lh-to-b9s.txt

@@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VIII - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Scripts..."

_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}
 

_pages/ar_SA/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_!    
 If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide).
@@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to
 This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents!
 {: .notice--success}
 
-Read all of the introductory pages before proceeding.
-{: .notice--warning}
-
 ## What is Homebrew?
 
 [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems.

_pages/ar_SA/homebrew-launcher-(alternatives).txt

@@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 #### What you need
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Power off your device
 1. Insert your SD card into your computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher:

_pages/ar_SA/homebrew-launcher-(soundhax).txt

@@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo
 #### What you need
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Power off your device
 1. Insert your SD card into your computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the Soundhax `.m4a` to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Launch Nintendo 3DS Sound

_pages/ar_SA/updating-b9s.txt

@@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card.
 
 ##### Section III - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Launch GodMode9 by holding (Start) during boot
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. Press (Home) to bring up the action menu

_pages/ca_ES/a9lh-to-b9s.txt

@@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VIII - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Scripts..."

_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}
 

_pages/ca_ES/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_!    
 If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide).
@@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to
 This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents!
 {: .notice--success}
 
-Read all of the introductory pages before proceeding.
-{: .notice--warning}
-
 ## What is Homebrew?
 
 [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems.

_pages/ca_ES/homebrew-launcher-(alternatives).txt

@@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 #### Què necessiteu
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instruccions
 
 1. Power off your device
 1. Insert your SD card into your computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher:

_pages/ca_ES/homebrew-launcher-(soundhax).txt

@@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo
 #### Què necessiteu
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instruccions
 
 1. Power off your device
 1. Insert your SD card into your computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the Soundhax `.m4a` to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Launch Nintendo 3DS Sound

_pages/ca_ES/updating-b9s.txt

@@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card.
 
 ##### Section III - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Launch GodMode9 by holding (Start) during boot
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. Press (Home) to bring up the action menu

_pages/cs_CZ/a9lh-to-b9s.txt

@@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VIII - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Scripts..."

_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}
 

_pages/cs_CZ/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_!    
 If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide).
@@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to
 This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents!
 {: .notice--success}
 
-Read all of the introductory pages before proceeding.
-{: .notice--warning}
-
 ## What is Homebrew?
 
 [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems.

_pages/cs_CZ/homebrew-launcher-(alternatives).txt

@@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 #### What you need
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Power off your device
 1. Insert your SD card into your computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher:

_pages/cs_CZ/homebrew-launcher-(soundhax).txt

@@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo
 #### What you need
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Power off your device
 1. Insert your SD card into your computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the Soundhax `.m4a` to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Launch Nintendo 3DS Sound

_pages/cs_CZ/updating-b9s.txt

@@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card.
 
 ##### Section III - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Launch GodMode9 by holding (Start) during boot
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. Press (Home) to bring up the action menu

_pages/da_DK/a9lh-to-b9s.txt

@@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VIII - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Scripts..."

_pages/da_DK/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}
 

_pages/da_DK/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_!    
 If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide).
@@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to
 This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents!
 {: .notice--success}
 
-Read all of the introductory pages before proceeding.
-{: .notice--warning}
-
 ## What is Homebrew?
 
 [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems.

_pages/da_DK/homebrew-launcher-(alternatives).txt

@@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 #### What you need
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Power off your device
 1. Insert your SD card into your computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher:

_pages/da_DK/homebrew-launcher-(soundhax).txt

@@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo
 #### What you need
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Power off your device
 1. Insert your SD card into your computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the Soundhax `.m4a` to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Launch Nintendo 3DS Sound

_pages/da_DK/updating-b9s.txt

@@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card.
 
 ##### Section III - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Launch GodMode9 by holding (Start) during boot
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. Press (Home) to bring up the action menu

_pages/de_DE/a9lh-to-b9s.txt

@@ -147,6 +147,9 @@ Wenn du vor dieser Anleitung bereits einen EmuNAND hattest und dessen Inhalte in
 
 ##### Section VIII - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Drücke  (HOME) um das Aktionsmenü aufzurufen
 1. Wähle "More..."
 1. Wähle "Scripts"

_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}
 

_pages/de_DE/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "Eine vollständige Anleitung für 3DS Custom Firmware, <br />von original zu boot9strap.<br />" #
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 **Diese Anleitung ist _nur_ für Handelsübliche Konsolen (vom Endnutzer im Handel erworben; nicht aus dem Nintendo Entwickler Programm bezogen) gedacht!    
 Wenn du eine Entwicklerkonsole ("PANDA" oder "SNAKE") besitzt, wirf einen Blick auf den [devGuide](https://dev.3ds.guide)**.
@@ -24,9 +27,6 @@ Wenn du eine Entwicklerkonsole ("PANDA" oder "SNAKE") besitzt, wirf einen Blick
 **Diese Anleitung braucht *deine* Hilfe, um [diese](https://3ds.guide/rss.xml) Torrents zu seeden!**!
 {: .notice--success}
 
-Bevor du fortfährst, lies alle Einleitungsseiten.
-{: .notice--warning}
-
 ## Was ist Homebrew?
 
 [**Homebrew**](https://de.wikipedia.org/wiki/Homebrew) bezeichnet für gewöhnlich Software, die nicht von Nintendo autorisiert wurde. Es erlaubt dir, Homebrew-Spiele, -Werkzeuge (wie beispielsweise Spielstandbearbeitung/-sicherung), oder Emulatoren für verschiedene ältere Konsolen laufen zu lassen.

_pages/de_DE/homebrew-launcher-(alternatives).txt

@@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 #### Was Du brauchst
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Anleitung
 
 1. Schalte deinen 3DS aus
 1. Stecke deine SD-Karte in deinen Computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Stecke deine SD-Karte nun wieder in deinen 3DS
 1. Schalte deine Konsole an
 1. Nutze einen der folgenden Eintrittpunkte um in den Homebrew Laucnher zu gelangen:

_pages/de_DE/homebrew-launcher-(soundhax).txt

@@ -20,12 +20,16 @@ Das bedeutet, dass ein Karten-Update von einer Systemversion, die eine ältere V
 #### Was du brauchst
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Anleitung
 
 1. Schalte deine Konsole aus
 1. Stecke deine SD-Karte in deinen Computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the Soundhax `.m4a` to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Stecke deine SD-Karte nun wieder in deinen 3DS
 1. Schalte deine Konsole an
 1. Starte die Nintendo 3DS Sound App

_pages/de_DE/updating-b9s.txt

@@ -51,6 +51,9 @@ Es gibt Berichte über eine Welle von Sperren, die von Nintendo für CFW-Nutzer
 
 ##### Section III - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Starte GodMode9, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hältst
 1. Wenn du aufgefordert wirst, ein "essential files backup" durchzuführen, drücke (A). Drücke erneut (A) nachdem es abgeschlossen ist
 1. Drücke  (HOME) um das Aktionsmenü aufzurufen

_pages/el_GR/a9lh-to-b9s.txt

@@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VIII - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Scripts..."

_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}
 

_pages/el_GR/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_!    
 If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide).
@@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to
 This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents!
 {: .notice--success}
 
-Read all of the introductory pages before proceeding.
-{: .notice--warning}
-
 ## Τι είναι το Homebrew;
 
 Ο όρος [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) συνήθως αναφέρεται σε λογισμικό το οποίο δεν είναι εξουσιοδοτημένο από την Nintendo. Σας επιτρέπει να τρέξετε homebrew παιχνίδια, εργαλεία όπως επεξεργασία αρχείων save και αντιγράφων ασφαλείας και emulators για διάφορα παλαιότερα συστήματα.

_pages/el_GR/homebrew-launcher-(alternatives).txt

@@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 #### Τι χρειάζεστε
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Οδηγίες
 
 1. Power off your device
 1. Εισάγετε την κάρτα SD στον υπολογιστή σας
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher:

_pages/el_GR/homebrew-launcher-(soundhax).txt

@@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo
 #### Τι χρειάζεστε
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Οδηγίες
 
 1. Power off your device
 1. Εισάγετε την κάρτα SD στον υπολογιστή σας
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the Soundhax `.m4a` to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Εκκινήστε την εφαρμογή Nintendo 3DS Sound

_pages/el_GR/updating-b9s.txt

@@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card.
 
 ##### Section III - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Launch GodMode9 by holding (Start) during boot
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. Press (Home) to bring up the action menu

_pages/en_PT/a9lh-to-b9s.txt

@@ -148,6 +148,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VIII - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Press (Home) to bring up th' action menu
 1. Select "More..."
 1. Select "Scripts..."

_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}
 

_pages/en_PT/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_!    
 If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide).
@@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to
 This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents!
 {: .notice--success}
 
-Read all of the introductory pages before proceeding.
-{: .notice--warning}
-
 ## What be Homebrew?
 
 [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems.

_pages/en_PT/homebrew-launcher-(alternatives).txt

@@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 #### What you need
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Power off ye device
 1. Insert ye SD card into ye computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert ye SD card into ye device
 1. Power on your device
 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher:

_pages/en_PT/homebrew-launcher-(soundhax).txt

@@ -6,7 +6,7 @@ Th' Homebrew Launcher has many different entrypoints, or methods 'o launchin'.
 
 Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
 
-Ensure ye device's Wireless Communication be turned on as udsploit (used in th' next page) gunna need th' wireless module to be active to function, 'n some devices (New 3DS, New 2DS, 'n Old 2DS) cannot adjust th' Wireless Communication setting from th' Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
+Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device.
 
 {% capture notice-1 %}
 
@@ -19,33 +19,17 @@ Note that Cart Updates will only deliver updates to core features, such as the S
 
 #### What ye need
 
-* Th' Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
 * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
-* Th' latest release 'o [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* Th' latest release 'o [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not th' `devkit` file, not th' `ntr` file)*
- 
-* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest)
-* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
-* Th' latest release 'o [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(th' `.7z` file)*
 * The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Power off your device
 1. Insert ye SD card into ye computer
-1. Copy _th' contents 'o_ `starter.zip` to th' root 'o ye SD card
+1. Copy `boot.3dsx` (OCS) to the root of your SD card
 1. Copy the Soundhax `.m4a` to the root of your SD card
 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
-1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
-1. Create a folder named `boot9strap` on th' root 'o ye SD card
-1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card
-1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card
-1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card
-1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin`
-
-    ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png)
-    {: .notice--info}
-
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Launch Nintendo 3DS Sound
@@ -58,15 +42,11 @@ Note that Cart Updates will only deliver updates to core features, such as the S
 1. Go to `/SDCARD`, then play "<3 nedwill 2016"
   + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
-  + If you get a red screen, ensure you copied _the contents of_ the `starter` folder to the root of your SD card
 
     ![]({{ base_path }}/images/screenshots/soundhax-launch.png)
     {: .notice--info}
 
-1. Your device should load the Homebrew Launcher
-
-    ![]({{ base_path }}/images/screenshots/homebrew-launcher.png)
-    {: .notice--info}
+1. Your device should load OCS
 
 ___
 

_pages/en_PT/updating-b9s.txt

@@ -51,6 +51,9 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card.
 
 ##### Section III - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Launch GodMode9 by holdin' (Start) durin' boot
 1. If ye be prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. Press (Home) to bring up th' action menu

_pages/es_ES/a9lh-to-b9s.txt

@@ -148,6 +148,9 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m
 
 ##### Sección VIII - Limpiar tarjeta SD
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Presiona el botón (Home) para abrir el menú de acción
 1. Selecciona "Mas..."
 1. Selecciona "Scripts..."

_pages/es_ES/finalizing-setup.txt

@@ -8,7 +8,7 @@ El archivo `boot.firm` es el que ejecuta boot9strap después de que termina de c
 
 En este caso, utilizamos Luma3DS de [AuroraWright](https://github.com/AuroraWright/) para ejecutar al inicio un SysNAND modificado directamente, permitiéndonos saltar la necesidad de cualquier EmuNAND, simplificando enormemente el uso de una 3DS hackeada además de ahorrar espacio en la tarjeta SD.
 
-Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS will need to download some files on your device.
+Asegúrate de que tu consola tenga la Comunicación inalámbrica habilitada y que esté conectada a internet. OCS requerirá descargar algunos archivos en tu consola.
 
 Durante este proceso, también instalaremos programas como los siguientes:    
 
@@ -20,7 +20,7 @@ Durante este proceso, también instalaremos programas como los siguientes:
 
 #### Instrucciones
 
-##### Section I - Updating the System
+##### Sección I - Actualizar el sistema
 
 Si, mientras seguías una versión anterior de esta guía, hiciste CTRTransfer de tu *New 3DS* a 2.1.0, ahora es el momento de [restaurar tu copia de seguridad de la NAND](godmode9-usage#nand_restore) antes de hacer esta sección.
 {: .notice--danger}
@@ -33,7 +33,7 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m
   + Si esto te da un error, ajusta tu configuración de DNS a "obtención automática"
   + Si esto te sigue dando un error, [sigue CTRTransfer](ctrtransfer), luego reintenta actualizar
 
-##### Section II - Launching OCS
+##### Sección II - Iniciar OCS
 
 1. Inicia la aplicación de Modo Descarga
 1. Presiona (L) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina
@@ -44,21 +44,21 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m
 1. Presiona (B) para salir del menú de Rosalina
 1. Presiona (Home), luego cierra la aplicación de Modo Descarga
 1. Inicia la aplicación de Modo Descarga
-1. Your device should load OCS
+1. Tu consola debería cargar OCS
 
-##### Section III - OCS
+##### Sección III - OCS
 
-1. Press (A) to begin
-1. Wait for the downloads and installs to complete
-1. Press (Start) to exit when prompted
+1. Presiona (A) para empezar
+1. Espera a que se completen las descargas y las instalaciones
+1. Presiona (Start) cuando se te pida
 1. Presiona (Home), luego cierra la aplicación de Modo Descarga
 
-##### Section IV - DSP Dump
+##### Sección IV - Volcado de DSP
 
 1. Inicia la aplicación DSP1
 1. Una vez que se haya completado, presiona (B) para que la aplicación se elimine a sí misma y regresar al menú HOME
 
-##### Section V - CTRNAND Luma3DS
+##### Sección V - CTRNAND Luma3DS
 
 1. Inicia GodMode9 manteniendo presionado (Start) mientras enciendes la consola
 1. Si se te pide crear copias de seguridad de archivos esenciales, presiona (A) para hacerlo y luego presiona (A) para continuar una vez que haya terminado
@@ -71,7 +71,7 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m
 1. Presiona (A) para continuar
 1. Presiona (A) para volver a bloquear los permisos de escritura
 
-##### Section VI - Backup SysNAND
+##### Sección VI - Copia de seguridad de la SysNAND
 
 1. Presiona el botón (Home) para abrir el menú de acción
 1. Selecciona "Mas..."
@@ -88,7 +88,7 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m
 1. Elimina el archivo `<númerodeserie>_nandmin_###.bin` de la carpeta `/gm9/out/` de tu tarjeta SD después de haberlo copiado
 1. Vuelve a insertar tu tarjeta SD en tu consola
 
-##### Section VII - Cleanup SD Card
+##### Sección VII - Limpieza de la tarjeta SD
 
 1. Presiona el botón (Home) para abrir el menú de acción
 1. Selecciona "Mas..."

_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Ten en cuenta que versiones más recientes del firmware de 3DS han bloqueado el
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Ten en cuenta que en raras ocasiones, es posible que realizar el proceso de flasheo en un clon de flashcart podría dejarla **permanentemente inutilizable**. Esto es poco probable, pero sin embargo, sólo las flashcarts originales mencionadas son compatibles. Para reducir la posibilidad de recibir un clon, se recomienda que utilizar un sitio de confianza para comprar una flashcart (como [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}
 

_pages/es_ES/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "Una guía completa de custom firmware para 3DS, <br /> desde stock a boot9strap.<br />"
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 ¡Esta guía es _sólo_ para consolas retail (compradas en tiendas), no para consolas del Nintendo Developer Program!    
 Si posees una consola de desarrollador ("PANDA" o "SNAKE"), echa un vistazo a [devGuide](https://dev.3ds.guide).
@@ -24,9 +27,6 @@ Si posees una consola de desarrollador ("PANDA" o "SNAKE"), echa un vistazo a [d
 ¡Esta guía necesita *tu* ayuda para compartir [estos](https://3ds.guide/rss.xml) torrents!
 {: .notice--success}
 
-Lee todas las páginas introductorias antes de continuar.
-{: .notice--warning}
-
 ## ¿Qué es Homebrew?
 
 [**Homebrew**](https://es.wikipedia.org/wiki/Homebrew) suele referirse a software no autorizado por Nintendo. Esto te permite ejecutar varios juegos caseros, herramientas para editar y respaldar partidas y emuladores de varios sistemas antiguos.

_pages/es_ES/homebrew-launcher-(alternatives).txt

@@ -6,17 +6,19 @@ El Homebrew Launcher tiene diferentes puntos de entrada, o métodos para ejecuta
 
 Si browserhax no es una opción (revisa la tabla de abajo), no posees ninguno de estos juegos y no tienes otra 3DS con acceso al Homebrew Launcher, la opción más barata es comprar una copia "Nintendo Selects" de [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (asegúrate de conseguir el cartucho correcto para tu región) y un [Powersaves](https://amzn.to/2fb3VY7) (compatible con todas las regiones), luego usa oot3dhax de la lista de abajo.
 
-Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device.
+Asegúrate de que tu consola tenga la Comunicación inalámbrica habilitada y que esté conectada a internet. OCS (aplicación a utilizar en la próxima página) requerirá descargar algunos archivos en tu consola.
 
 #### Qué necesitas
 
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instrucciones
 
 1. Apaga tu consola
 1. Inserta tu tarjeta SD en tu computadora
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Vuelve a insertar tu tarjeta SD en tu consola
 1. Enciende tu consola
 1. Utiliza uno de los siguientes puntos de entrada alternativos para acceder al Homebrew Launcher:
@@ -50,7 +52,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the
     </script>
     <script src="//z-na.amazon-adsystem.com/widgets/onejs?MarketPlace=US"></script>
 
-1. Your device should load OCS
+1. Tu consola debería cargar OCS
 
 Continúa en [Instalar boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
 {: .notice--primary}

_pages/es_ES/homebrew-launcher-(soundhax).txt

@@ -6,7 +6,7 @@ El Homebrew Launcher tiene diferentes puntos de entrada, o métodos para ejecuta
 
 Soundhax es compatible con las versiones 9.0.0 hasta la 11.3.0 en las regiones EUR, JPN, KOR y USA.
 
-Asegúrate de que la Comunicación inalámbrica de tu dispositivo está encendida, ya que udsploit (usado en la siguiente página) necesitará que el módulo inalámbrico esté activado para funcionar. Algunos dispositivos (New 3DS, New 2DS y Old 2DS) no pueden ajustar la Comunicación inalámbrica desde el Hombrew Launcher. La Comunicación inalámbrica sólo debe estar activada; no es necesario conectarse a una red.
+Asegúrate de que tu consola tenga la Comunicación inalámbrica habilitada y que esté conectada a internet. OCS (aplicación a utilizar en la próxima página) requerirá descargar algunos archivos en tu consola.
 
 {% capture notice-1 %}
 
@@ -19,33 +19,17 @@ Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los eleme
 
 #### Qué necesitas
 
-* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
-* La última versión de [Soundhax](http://soundhax.com/) *(correspondiente a tu consola y región)*
-* La última versión de [SafeB9SInstaller]
-(https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)*
-* La última versión de [safehax](https://github.com/TiniVi/safehax/releases/latest)
-* La última versión de [udsploit](https://github.com/smealum/udsploit/releases/latest)
-* La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
-* El [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(correspondiente a tu versión del sistema y región)*
+* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instrucciones
 
 1. Apaga tu consola
 1. Inserta tu tarjeta SD en tu computadora
-1. Copia _el contenido de_ `starter.zip` a la raíz de tu tarjeta SD
-1. Copia el archivo `.m4a` de Soundhax en la raíz de tu tarjeta SD
-1. Copia el otherapp payload a la raíz de tu tarjeta SD y cambia su nombre a `otherapp.bin`
-1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD
-1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD
-1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD
-1. Copia `safehax.3dsx` a la carpeta `/3ds/` en tu tarjeta SD
-1. Copia `udsploit.3dsx` a la carpeta `/3ds/` en tu tarjeta SD
-1. Copia `SafeB9SInstaller.bin` desde el `.zip` de SafeB9SInstaller a la raíz de tu tarjeta SD y renombra `SafeB9SInstaller.bin` a `safehaxpayload.bin`
-
-    ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png)
-    {: .notice--info}
-
+1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD
+1. Copy the Soundhax `.m4a` to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Vuelve a insertar tu tarjeta SD en tu consola
 1. Enciende tu consola
 1. Inicia Nintendo 3DS Sound
@@ -58,15 +42,11 @@ Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los eleme
 1. Ve a `/SDCARD`, y luego reproduce "<3 nedwill 2016"
   + Esto podría tomar varios intentos
   + Si se congela, fuerza el apagado de la consola manteniendo presionado el botón para apagarla y luego vuelve a intentar
-  + Si la pantalla se queda en rojo, asegúrate de haber copiado _los contenidos_de_la carpeta `starter` a la raíz de tu tarjeta SD
 
     ![]({{ base_path }}/images/screenshots/soundhax-launch.png)
     {: .notice--info}
 
-1. Tu consola debería cargar el Homebrew Launcher
-
-    ![]({{ base_path }}/images/screenshots/homebrew-launcher.png)
-    {: .notice--info}
+1. Tu consola debería cargar OCS
 
 ___
 

_pages/es_ES/installing-boot9strap-(2xrsa).txt

@@ -8,7 +8,7 @@ title: "Instalar boot9strap (2xrsa)"
 (https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)*
 * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest)
 
 #### Instrucciones
 
@@ -16,7 +16,7 @@ title: "Instalar boot9strap (2xrsa)"
 
 1. Apaga tu consola
 1. Inserta tu tarjeta SD en tu computadora
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD
 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD
 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD
 1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD

_pages/es_ES/installing-boot9strap-(browser).txt

@@ -10,7 +10,7 @@ Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía
 (https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)*
 * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest)
 
 #### Instrucciones
 
@@ -18,7 +18,7 @@ Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía
 
 1. Apaga tu consola
 1. Inserta tu tarjeta SD en tu computadora
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD
 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD
 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD
 1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD

_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt

@@ -27,7 +27,7 @@ Antes de proceder, asegúrate de leer todos los avisos y advertencias al [Instal
 * La última versión de [b9sTool](https://github.com/Plailect/b9sTool/releases/latest)
 * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)*
 * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest)
 * El archivo `.firm` 11.4.0 / 11.5.0 (ámbas versiones tienen la misma versión FIRM) correspondiente a **la 3DS de destino** (ya sea "OLD" para Old 3DS, o "NEW" para New 3DS):
   + <i class="fa fa-magnet" aria-hidden="true" title="Este es un enlace magnético. Usa un cliente torrent para descargar el archivo."></i> - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
   + <i class="fa fa-magnet" aria-hidden="true" title="Este es un enlace magnético. Usa un cliente torrent para descargar el archivo."></i> - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
@@ -136,7 +136,7 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
 
 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD
 1. Copia `boot.nds` (B9STool) a la raíz de la tarjeta SD de **la 3DS de destino**
-1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card
+1. Copia `boot.3dsx` (OCS) a la raíz de la tarjeta SD de **la 3DS de destino**
 1. Crea una carpeta llamada `boot9strap` en la raíz de la tarjeta SD de **la 3DS de destino**
 1. Copia el archivo 11.5.0 `.firm` correspondiente a **la 3DS de destino** a la carpeta `boot9strap` en la raíz de la tarjeta SD de **la 3DS de destino**
 1. Copia el archivo `boot9strap.firm` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD

_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt

@@ -26,7 +26,7 @@ Antes de proceder, asegúrate de leer todos los avisos y advertencias al [Instal
 * La última versión de [b9sTool](https://github.com/Plailect/b9sTool/releases/latest)
 * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)*
 * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest)
 * El archivo `.firm` 11.4.0 / 11.5.0 (ámbas versiones tienen la misma versión FIRM) correspondiente a **la 3DS de destino** (ya sea "OLD" para Old 3DS, o "NEW" para New 3DS):
   + <i class="fa fa-magnet" aria-hidden="true" title="Este es un enlace magnético. Usa un cliente torrent para descargar el archivo."></i> - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
   + <i class="fa fa-magnet" aria-hidden="true" title="Este es un enlace magnético. Usa un cliente torrent para descargar el archivo."></i> - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
@@ -142,7 +142,7 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
 
 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD
 1. Copia `boot.nds` (B9STool) a la raíz de la tarjeta SD de **la 3DS de destino**
-1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card
+1. Copia `boot.3dsx` (OCS) a la raíz de la tarjeta SD de **la 3DS de destino**
 1. Crea una carpeta llamada `boot9strap` en la raíz de la tarjeta SD de **la 3DS de destino**
 1. Copia el archivo 11.5.0 `.firm` correspondiente a **la 3DS de destino** a la carpeta `boot9strap` en la raíz de la tarjeta SD de **la 3DS de destino**
 1. Copia el archivo `boot9strap.firm` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD

_pages/es_ES/installing-boot9strap-(hardmod).txt

@@ -17,7 +17,7 @@ Esto funcionará en New 3DS, New 2DS, Old 3DS, y Old 2DS en *todas* las versione
 * La última versión de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
   + Los usuarios de Windows pueden usar el `.exe` compilado, mientras que los usuarios de Mac y Linux necesitarán tener [Python 3](https://www.python.org/downloads/) instalado para ejecutar el `.py`
 * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest)
 * El archivo `.firm` correspondiente a tu consola y versión:
 
 | Versión(es) | Kernel | Old 3DS u Old 2DS | New 3DS o New 2DS |
@@ -54,7 +54,7 @@ Esto funcionará en New 3DS, New 2DS, Old 3DS, y Old 2DS en *todas* las versione
 
 ##### Sección I - Preparativos
 
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD
 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD
 1. Copia la carpeta hardmod-b9s-installer desde el `.zip` de hardmod-b9s-installer a tu computadora
 1. Copia el `.firm` descargado a la carpeta hardmod-b9s-installer en tu computadora

_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt

@@ -6,14 +6,14 @@ Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía
 
 #### Instrucciones
 
-##### Section I - OCS
+##### Sección I - OCS
 
-1. Press (A) to begin
-1. Wait for the downloads to complete
-1. Wait for the exploit to run
+1. Presiona (A) para empezar
+1. Espera a que se completen las descargas
+1. Espera a que se ejecute el exploit
   + Esto puede tomar varios intentos
-  + If it freezes, just force the console to power off by holding the power button, then relaunch OCS to try again
-  + If you get a "PM INIT FAILED" error, try replacing the `safehax.3dsx` file in the `/3ds/` folder on your SD card with the one from the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+  + Si se congela, fuerza el apagado de la consola manteniendo presionado el botón de apagado y luego ejecuta OCS otra vez para intentar de nuevo
+  + Si aparece como error "PM INIT FAILED", intenta reemplazar el archivo `safehax.3dsx` en la carpeta `/3ds/` de tu tarjeta SD con el archivo encontrable en [la versión r19 de safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
 1. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
 
 ##### Sección II - Instalar boot9strap

_pages/es_ES/installing-boot9strap-(mset).txt

@@ -9,7 +9,7 @@ Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía
 * La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)*
 * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest)
 * Cualquier flashcart de DS que funcione en la versión de tu consola
 
 #### Instrucciones
@@ -18,7 +18,7 @@ Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía
 
 1. Apaga tu consola
 1. Inserta tu tarjeta SD en tu computadora
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD
 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD
 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD
 1. Copia los archivos `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD

_pages/es_ES/installing-boot9strap-(ntrboot).txt

@@ -10,7 +10,7 @@ title: "Instalar boot9strap (ntrboot)"
 (https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)*
 * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest)
 
 #### Instrucciones
 
@@ -18,7 +18,7 @@ title: "Instalar boot9strap (ntrboot)"
 
 1. Apaga tu consola
 1. Inserta tu tarjeta SD en tu computadora
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD
 1. Copia `SafeB9SInstaller.firm` a la raíz de tu tarjeta SD y renombra el archivo a `boot.firm`
 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD
 1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD

_pages/es_ES/updating-b9s.txt

@@ -51,6 +51,9 @@ Para todos los pasos en esta sección, sobreescribe cualquier archivo existente
 
 ##### Sección III - Limpiar tarjeta SD
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Inicia GodMode9 manteniendo presionado (Start) mientras enciendes la consola
 1. Si se te pide crear copias de seguridad de archivos esenciales, presiona (A) para hacerlo y luego presiona (A) para continuar una vez que haya terminado
 1. Presiona el botón (Home) para abrir el menú de acción

_pages/fi_FI/a9lh-to-b9s.txt

@@ -147,6 +147,9 @@ Jos sinulla oli ennen tämän oppaan aloittamista EmuNAND-kokoonpano, ja haluais
 
 ##### Vaihe VIII – SD-kortin siivoaminen
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Paina (HOME)-painiketta näyttääksesi toimintovalikon
 1. Valitse "More..."
 1. Valitse "Scripts..."

_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Huomaa, että joidenkin flash-korttien käyttö on estetty 3DS:n uudemmilla jär
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **vioittaa** jäljitelmä-flash-korttia ja tehdä siitä pysyvästi käyttökelvottoman. Vaikka tämä onkin epätodennäköistä, on suositeltavaa käyttää vain alkuperäisiä kortteja. Jotta välttyisit jäljitelmäkortin saamiselta, on suositeltavaa käyttää flash-kortin ostamiseen hyvämaineista sivustoa (kuten [NDS Card](http://www.nds-card.com/)ia).
 {: .notice--danger}
 

_pages/fi_FI/get-started-(new-3ds).txt

@@ -56,7 +56,7 @@ Konsolisi versio löytyy yläruudun oikeasta alakulmasta järjestelmäasetuksiss
     </tr>
     <tr>
       <td style="text-align: center; font-weight: bold;" colspan="2">Kaikki versiot<br></td>
-      <td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="ntrboot">ntrboot</a><br><sub>(vaatii yhteensopivan flash-kortin)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">tai</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Boot9strapin asentaminen (laitteistomodaus)</a><br><sub>(vaatii juottamista)</sub></p></td>
+      <td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="ntrboot">Ntrboot</a><br><sub>(vaatii yhteensopivan flash-kortin)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">tai</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Boot9strapin asentaminen (laitteistomodaus)</a><br><sub>(vaatii juottamista)</sub></p></td>
     </tr>
   </tbody>
 </table>

_pages/fi_FI/get-started-(old-3ds).txt

@@ -91,7 +91,7 @@ Jos päivitit pelikortilla, joka sisältää 9.9.0:n tai sitä uudemman version
     </tr>
     <tr>
       <td style="text-align: center; font-weight: bold;" colspan="2">Kaikki versiot<br></td>
-      <td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="ntrboot">ntrboot</a><br><sub>(vaatii yhteensopivan flash-kortin)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">tai</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Boot9strapin asentaminen (laitteistomodaus)</a><br><sub>(vaatii juottamista)</sub></p></td>
+      <td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="ntrboot">Ntrboot</a><br><sub>(vaatii yhteensopivan flash-kortin)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">tai</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Boot9strapin asentaminen (laitteistomodaus)</a><br><sub>(vaatii juottamista)</sub></p></td>
     </tr>
   </tbody>
 </table>

_pages/fi_FI/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "Perusteellinen opas 3DS:n mukautettuun laiteohjelmistoon, <br /> vakio-ohjelmistosta boot9strapiin.<br />"
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 Tämä opas on _vain_ normaaleille (kuluttajan ostama; ei Nintendon kehittäjäohjelmasta) konsoleille!    
 Jos sinulla on kehittäjäkonsoli ("PANDA" tai "SNAKE"), tutustu [devGuide](https://dev.3ds.guide)en.
@@ -24,9 +27,6 @@ Tämä opas tarvitsee *sinun* apuasi sen [kääntämisessä](https://translate.3
 Tämä opas tarvitsee *sinun* apuasi [näiden](https://3ds.guide/rss.xml) torrentien jakamisessa!
 {: .notice--success}
 
-Lue kaikki johdantosivut ennen aloittamista.
-{: .notice--warning}
-
 ## Mikä on homebrew?
 
 [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) viittaa yleensä ohjelmistoon, joka ei ole Nintendon hyväksymä. Se mahdollistaa kotitekoisten pelien, työkalujen (kuten tallennusten muokkaus ja varmuuskopiointi) ja emulaattoreiden käyttämisen.
@@ -69,7 +69,7 @@ Luettelon kaikista lasketuista sighaxin allekirjoituksista (joiden päälle boot
 ## Mitä minun täytyy tietää ennen aloittamista?
 
 + **Ennen oppaan aloittamista sinun on tiedettävä 3DS-hakkeroinnin riskit: JOKA kerta, kun muokkaat konsoliasi, on mahdollisuus siihen, että se vioittuu PYSYVÄSTI. Vaikka tämä onkin hyvin epätodennäköistä, seuraa KAIKKIA ohjeita TARKALLEEN.**
-+ Jos olet jo hakkeroinut konsolisi EmuNAND-kokoonpanoa varten, ja haluat siirtää sisältösi uuteen SysNAND-CFW-kokoonpanoon, seuraa kaikkia ohjeita ja palauta EmuNAND osiossa [Asennuksen viimeistely](installing-arm9loaderhax), siinä vaiheessa kun ohje siihen kehottaa.
++ Jos olet jo hakkeroinut konsolisi EmuNAND-kokoonpanoa varten, ja haluat siirtää sisältösi uuteen SysNAND-CFW-kokoonpanoon, seuraa kaikkia ohjeita ja palauta EmuNAND osiossa [Asennuksen viimeistely](finalizing-setup), siinä vaiheessa kun ohje siihen kehottaa.
 + Tämä opas toimii New 3DS:llä, vanhalla 3DS:llä, New 2DS:llä sekä vanhalla 2DS:llä kaikilla alueilla, laiteohjelmistolla 11.5.0 tai sitä vanhemmilla versioilla.
 + Jos kaikki menee suunnitelmien mukaan, et menetä mitään tietoja ja päädyt samaan kokoonpanoon, joka sinulla oli alussa (pelit, NNID, tallennukset jne. säilyvät).
 + **Pidä konsolisi latauksessa koko prosessin ajan välttyäksesi tietojen menettämiseltä tai odottamattomasta sammumisesta aiheutuvalta vahingolta!**

_pages/fi_FI/homebrew-launcher-(alternatives).txt

@@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 #### Tarpeet
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Ohjeet
 
 1. Sammuta konsolisi
 1. Aseta SD-korttisi tietokoneeseesi
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Aseta SD-korttisi takaisin konsoliisi
 1. Käynnistä konsolisi
 1. Käytä jotakin seuraavista käynnistystavoista päästäksesi Homebrew Launcheriin:

_pages/fi_FI/homebrew-launcher-(soundhax).txt

@@ -20,12 +20,16 @@ Tämä tarkoittaa sitä, että korttipäivityksen tekeminen versiolta, jolla on
 #### Tarpeet
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Ohjeet
 
 1. Sammuta konsolisi
 1. Aseta SD-korttisi tietokoneeseesi
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the Soundhax `.m4a` to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Aseta SD-korttisi takaisin konsoliisi
 1. Käynnistä konsolisi
 1. Avaa Nintendo 3DS Sound

_pages/fi_FI/updating-b9s.txt

@@ -51,6 +51,9 @@ Korvaa mahdolliset olemassa olevat tiedostot SD-kortillasi kaikissa tämän vaih
 
 ##### Vaihe III – SD-kortin siivoaminen
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Avaa GodMode9 pitämällä (START)-painiketta pohjassa konsolin käynnistyessä
 1. Jos ohjelma kehottaa luomaan varmuuskopion tärkeistä tiedostoista (essential files), paina (A):ta tehdäksesi sen, ja kun varmuuskopio on valmis, paina (A):ta uudelleen jatkaaksesi
 1. Paina (HOME)-painiketta näyttääksesi toimintovalikon

_pages/fr_FR/a9lh-to-b9s.txt

@@ -148,6 +148,9 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou
 
 ##### Section VIII - Nettoyer la Carte SD
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu)
 1. Sélectionnez "More..."
 1. Sélectionnez "Scripts"

_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne inutilsable . C'est peu probable , mais notez que seule les originaux fonctionnent avec Ntrboot . Pour réduire les chances d'avoir une contrefaçon utilisez ([NDS Card](http://www.nds-card.com/))
 {: .notice--danger}
 

_pages/fr_FR/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "Un guide complet pour le custom firmware de 3DS, <br /> depuis le firmware original vers boot9strap.<br />"
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 Ce guide est destiné aux consoles grand public (achetées par un consommateur; pas issues du Programme Développeur de Nintendo) _uniquement_!    
 Si vous avez une console développeur ("PANDA" ou "SNAKE"), dirigez vous vers le [guide développeur](https://dev.3ds.guide).
@@ -24,9 +27,6 @@ Ce guide a besoin de *votre* aide afin d'être [traduit](https://translate.3ds.g
 Ce guide a besoin de *votre* aide pour partager [ces](https://3ds.guide/rss.xml) fichiers torrents!
 {: .notice--success}
 
-Lisez toutes les pages d'introduction avant de commencer.
-{: .notice--warning}
-
 ## Qu'est-ce qu'un Homebrew ?
 
 Les [**Homebrew**](http://goo.gl/fXgk5v) désignent généralement des logiciels qui ne sont pas autorisés par Nintendo. Cela vous permet de lancer des jeux créés par la communauté, des outils comme des éditeurs de sauvegarde et des émulateurs pour tout un tas de consoles rétro.

_pages/fr_FR/homebrew-launcher-(alternatives).txt

@@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 #### Ce dont vous aurez besoin
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Éteignez votre 3DS
 1. Insérez votre carte SD dans votre ordinateur
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Réinsérez votre carte SD dans votre 3DS
 1. Allumez à présent votre 3DS
 1. Utilisez un de ces points d'accès alternatifs suivants pour entrer dans l'Homebrew Launcher:

_pages/fr_FR/homebrew-launcher-(soundhax).txt

@@ -20,12 +20,16 @@ Cela signifie qu'à l'aide d'une Mise à jour par Cartouche depuis une version
 #### Ce dont vous aurez besoin
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Éteignez votre 3DS
 1. Insérez votre carte SD dans votre ordinateur
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the Soundhax `.m4a` to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Retirez la carte SD de votre ordinateur et réinsérez-là dans votre 3DS
 1. Allumez à présent votre 3DS
 1. Lancez l'application Studio Son Nintendo 3DS

_pages/fr_FR/updating-b9s.txt

@@ -51,6 +51,9 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants
 
 ##### Section III - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Ouvrez Godmode9 en maintenant (Start) au démarrage
 1. Si vous êtes invité à créer une sauvegarde de fichiers essentiels, appuyez sur (A) pour le faire, puis appuyez sur (A) pour continuer une fois qu’elle a complété
 1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu)

_pages/he_IL/a9lh-to-b9s.txt

@@ -147,6 +147,9 @@ title: "A9LH אל B9S"
 
 ##### חלק VIII - ניקוי ה SD
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. תלחצו על (Home) כדי להראות את תפריט הפעולה
 1. תבחרו ב"More..."
 1. תבחרו "Scripts..."

_pages/he_IL/finalizing-setup.txt

@@ -8,7 +8,7 @@ title: "סיום התהליך"
 
 לכן, נשתמש ב-Luma3DS מאת [AuroraWright](https://github.com/AuroraWright/) על מנת לעשות בוט לתוך SysNAND מותאם ישירות, דבר אשר מאפשר לנו לעקוף לחלוטין כל צורך של EmuNAND ובכך לפשט את השימוש ב-3DS פרוץ במקביל לחסכון בנפח ה-SD.
 
-Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS will need to download some files on your device.
+תבדקו שהתקשורת האלחוטית של הקונסולה שלכם דלוקה ומחוברת לאינטרנט. OCS יצטרך להוריד כמה קבצים על הקונסולה שלכם.
 
 בתהליך זה, גם נתקין את התוכנות הבאות:    
 
@@ -20,7 +20,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 
 #### הוראות
 
-##### Section I - Updating the System
+##### חלק I - עדכון המערכת
 
 אם, במהלך שעקבתם אחרי גרסה ישנה של המדריך, שנמכתם את ה*New 3DS* שלכם לגרסא 2.1.0, עכשיו זה הזמן [לשחזר את הגיבוי שלכם](godmode9-usage#nand_restore) לפני שאתם עושים את החלק הזה.
 {: .notice--danger}
@@ -33,7 +33,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the
   + אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto"
   + אם זה ממשיך לתת לכם שגיאה, [עקבו אחרי CTRTransfer](ctrtransfer), ואז תנסו לעדכן שוב
 
-##### Section II - Launching OCS
+##### חלק II - הפעלת OCS
 
 1. תפעילו את Download Play
 1. תלחצו (L) + (Down) + (Select) באותו זמן כדי לפתוח את התפריט של Rosalina
@@ -44,21 +44,21 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 1. תלחצו (B) כדי לצאת מהתפריט של Rosalina
 1. תלחצו על (Home), ואז תסגרו את Download Play
 1. תפעילו את Download Play
-1. Your device should load OCS
+1. הקונסולה שלכם אמורה לטעון את OCS
 
-##### Section III - OCS
+##### חלק III - OCS
 
-1. Press (A) to begin
-1. Wait for the downloads and installs to complete
-1. Press (Start) to exit when prompted
+1. תלחצו (A) כדי להתחיל
+1. תחכו לכל ההורדות וההתקנות להסתיים
+1. תלחצו (Start) כדי לצאת כשמבקשים ממכם
 1. תלחצו על (Home), ואז תסגרו את Download Play
 
-##### Section IV - DSP Dump
+##### חלק IV - DSP Dump
 
 1. תפעילו את DSP1
 1. אחרי שזה סיים, תלחצו (B) כדי למחוק את התוכנה ולחזור למסך הבית
 
-##### Section V - CTRNAND Luma3DS
+##### חלק V - Luma3DS על ה- CTRNAND
 
 1. תפתחו את GodMode9 על ידי החזקה של המקש (Start) בעת ההדלקה
 1. אם תתבקשו לעשות גיבוי של קבצים חיוניים, תלחצו (A) כדי לעשות זאת, ואז תלחצו (A) כדי להמשיך אחרי שזה סיים
@@ -71,7 +71,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 1. תלחצו (A) כדי להמשיך
 1. תלחצו (A) כדי לנעול הרשאות כתיבה
 
-##### Section VI - Backup SysNAND
+##### חלק VI - גיבוי SysNAND
 
 1. תלחצו על (Home) כדי להראות את תפריט הפעולה
 1. תבחרו ב"More..."
@@ -88,7 +88,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 1. תמחקו את `<serialnumber>_nandmin_###.bin` בתיקיה `/gm9/out/` על הSD לאחר שהעתקתם אותו
 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
 
-##### Section VII - Cleanup SD Card
+##### חלק VII - ניקוי ה SD
 
 1. תלחצו על (Home) כדי להראות את תפריט הפעולה
 1. תבחרו ב"More..."

_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ title: "צריבת ntrboot (מערכת 3DS אחת)"
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 שימו לב שבמקרים נדירים, יתכן שתהליך הצריבה **ישבור** כרטיס פריצה מזוייף ויגרום לו לא לעבוד. זה לא סביר שייקרה, אבל בכל זאת רק כרטיסי פריצה מקוריים שמפורטים נתמכים. כדי להוריד את הסיכויים של להשיג כרטיס פריצה מזוייף, מומלץ להשתמש באתר אמין כדי לקנות את הכרטיס (כמו [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}
 

_pages/he_IL/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "מדריך שלם לפריצת 3DS, <br /> מהחנות עד ל boot9strap.<br />"
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 המדריך הזה הוא לקונסולות קמעוניות (כאלו שנקנו בחנות; לא כאלה מתוכנית המפתחים) בלבד!    
 אם יש לכם קונסולת מפתחים, לכו ל[devGuide](https://dev.3ds.guide).
@@ -24,9 +27,6 @@ excerpt: "מדריך שלם לפריצת 3DS, <br /> מהחנות עד ל boot9s
 המדריך הזה צריך את העזרה *שלכם* בשביל סיד ל[טורנטים הבאים](https://3ds.guide/rss.xml)!
 {: .notice--success}
 
-תקראו את כל הדפים המקדימים לפני שאתם ממשיכים.
-{: .notice--warning}
-
 ## מה זה Homebrew?
 
 המונח [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) מתייחס בדרך כלל לתוכנה שאינה מאושרת על ידי נינטנדו. זה מאפשר לכם להפעיל משחקי homebrew, כלים כמו עריכת וגיבוי שמירות, ואמולטורים למערכות יותר ישנות.

_pages/he_IL/homebrew-launcher-(alternatives).txt

@@ -6,17 +6,19 @@ title: "Homebrew Launcher (אלטרנטיבות)"
 
 אם Browserhax הוא לא אופציה (תראו את הטבלה למטה), ואין לכם אחד המשחקים האלה כבר או מכשיר נוסף שיש לו גישה לHomebrew Launcher, האופציה הכי זולה היא לקנות עותק של [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (תוודאות שאתם קונים את העותק הנכון לגרסא שלכם) ומכשיר [Powersaves](https://amzn.to/2fb3VY7) (מתאים לכלל האיזורים), ואז לבחור בoot3dhax מהטבלה.
 
-Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device.
+תבדקו שהתקשורת האלחוטית של הקונסולה שלכם דלוקה ומחוברת לאינטרנט. OCS (משומש בעמוד הבא) יצטרך להוריד כמה קבצים על הקונסולה שלכם.
 
 #### מה נדרש
 
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### הנחיות
 
 1. תכבו את המכשיר
 1. תכניסו את ה-SD שלכם למחשב
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
 1. תפעילו את המכשיר
 1. השתמשו באחד מהכניסות הבאות על מנת להפעיל את הHomebrew Launcher:
@@ -50,7 +52,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the
     </script>
     <script src="//z-na.amazon-adsystem.com/widgets/onejs?MarketPlace=US"></script>
 
-1. Your device should load OCS
+1. הקונסולה שלכם אמורה לטעון את OCS
 
 תמשיכו אל [התקנת boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
 {: .notice--primary}

_pages/he_IL/homebrew-launcher-(soundhax).txt

@@ -6,7 +6,7 @@ title: "Homebrew Launcher (Soundhax)"
 
 SoundHax תומך בגירסאות 9.0.0 עד 11.3.0 באזורים EUR, JPN, KOR, וUSA.
 
-Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device.
+תבדקו שהתקשורת האלחוטית של הקונסולה שלכם דלוקה ומחוברת לאינטרנט. OCS (משומש בעמוד הבא) יצטרך להוריד כמה קבצים על הקונסולה שלכם.
 
 {% capture notice-1 %}
 
@@ -19,13 +19,17 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 
 #### מה נדרש
 
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### הוראות
 
 1. תכבו את המכשיר
 1. תכניסו את ה-SD שלכם למחשב
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD
+1. Copy the Soundhax `.m4a` to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
 1. תפעילו את המכשיר
 1. כנסו לנגן המוזיקה
@@ -42,7 +46,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the
     ![]({{ base_path }}/images/screenshots/soundhax-launch.png)
     {: .notice--info}
 
-1. Your device should load OCS
+1. הקונסולה שלכם אמורה לטעון את OCS
 
 ___
 

_pages/he_IL/installing-boot9strap-(2xrsa).txt

@@ -7,7 +7,7 @@ title: "התקנת boot9strap (2xrsa)"
 * הגרסה העדכנית של [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)*
 * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest)
 
 #### הוראות
 
@@ -15,7 +15,7 @@ title: "התקנת boot9strap (2xrsa)"
 
 1. תכבו את המכשיר
 1. תכניסו את ה-SD שלכם למחשב
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD
 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם
 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap`
 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם

_pages/he_IL/installing-boot9strap-(browser).txt

@@ -9,7 +9,7 @@ title: "התקנת boot9strap (דפדפן)"
 * הגרסה העדכנית של [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)*
 * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest)
 
 #### הוראות
 
@@ -17,7 +17,7 @@ title: "התקנת boot9strap (דפדפן)"
 
 1. תכבו את המכשיר
 1. תכניסו את ה-SD שלכם למחשב
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD
 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם
 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap`
 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם

_pages/he_IL/installing-boot9strap-(dsiware-game-injection).txt

@@ -27,7 +27,7 @@ title: "התקנת boot9strap (הזרקת משחק DSiWare)"
 * הגרסה העדכנית של [b9sTool](https://github.com/Plailect/b9sTool/releases/latest)
 * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)*
 * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest)
 * קובץ ה `.firm` של 11.4.0 / 11.5.0 (לשתי הגרסאות יש את אותה גרסת FIRM) שמתאים ל **3DS היעד** (או "OLD" בשביל Old 3DS, או "NEW" בשביל New 3DS):
   + <i class="fa fa-magnet" aria-hidden="true" title="זה לינק מגנטי. תשתמשו בתוכנת טורנט כדי להוריד את הקובץ."></i> - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
   + <i class="fa fa-magnet" aria-hidden="true" title="זה לינק מגנטי. תשתמשו בתוכנת טורנט כדי להוריד את הקובץ."></i> - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
@@ -136,7 +136,7 @@ title: "התקנת boot9strap (הזרקת משחק DSiWare)"
 
 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם
 1. תעתיקו את `boot.nds` (שזה B9STool) לשורש הSD של **קונסולת היעד**
-1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card
+1. תעתיקו את `boot.3dsx` (שזה OCS) לשורש הSD של **קונסולת היעד**
 1. תיצרו תיקייה בשם `boot9strap` על שורש כרטיס הSD של **קונסולת היעד**
 1. תעתיקו את ה`.firm` של 11.5.0 שמתאים ל**קונסולת היעד** לתיקיית `boot9strap` על שורש כרטיס הSD של **קונסולת היעד**
 1. תעתיקו את`boot9strap.firm` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם

_pages/he_IL/installing-boot9strap-(dsiware-save-injection).txt

@@ -26,7 +26,7 @@ title: "התקנת boot9strap (הזרקת שמירת DSiWare)"
 * הגרסה העדכנית של [b9sTool](https://github.com/Plailect/b9sTool/releases/latest)
 * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)*
 * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest)
 * קובץ ה `.firm` של 11.4.0 / 11.5.0 (לשתי הגרסאות יש את אותה גרסת FIRM) שמתאים ל **3DS היעד** (או "OLD" בשביל Old 3DS, או "NEW" בשביל New 3DS):
   + <i class="fa fa-magnet" aria-hidden="true" title="זה לינק מגנטי. תשתמשו בתוכנת טורנט כדי להוריד את הקובץ."></i> - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
   + <i class="fa fa-magnet" aria-hidden="true" title="זה לינק מגנטי. תשתמשו בתוכנת טורנט כדי להוריד את הקובץ."></i> - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
@@ -142,7 +142,7 @@ title: "התקנת boot9strap (הזרקת שמירת DSiWare)"
 
 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם
 1. תעתיקו את `boot.nds` (שזה B9STool) לשורש הSD של **קונסולת היעד**
-1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card
+1. תעתיקו את `boot.3dsx` (שזה OCS) לשורש הSD של **קונסולת היעד**
 1. תיצרו תיקייה בשם `boot9strap` על שורש כרטיס הSD של **קונסולת היעד**
 1. תעתיקו את ה`.firm` של 11.5.0 שמתאים ל**קונסולת היעד** לתיקיית `boot9strap` על שורש כרטיס הSD של **קונסולת היעד**
 1. תעתיקו את`boot9strap.firm` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם

_pages/he_IL/installing-boot9strap-(hardmod).txt

@@ -17,7 +17,7 @@ title: "התקנת boot9strap (הלחמה)"
 * הגרסה העדכנית של [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
   + משתמשי Windows יכולים להשתמש ב`.exe` המקומפל, בעוד שמשתמשי Mac וLinux יצטרכו את [Python 3](https://www.python.org/downloads/) מותקן כדי להריץ את ה`.py`
 * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest)
 * הקובץ`.firm` לפי הקונסולה והאזור:
 
 | גרסא(אות) | ליבה | Old 3DS או Old 2DS | New 3DS או New 2DS |
@@ -54,7 +54,7 @@ title: "התקנת boot9strap (הלחמה)"
 
 ##### חלק I - הכנות
 
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD
 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם
 1. תעתיקו את תיקיית hardmod-b9s-installer מה `.zip` של hardmod-b9s-installer אל תיקייה במחשב שלכם
 1. תעתיקו את ה`.firm` שהורדתם אל תיקיית hardmod-b9s-installer במחשב שלכם

_pages/he_IL/installing-boot9strap-(homebrew-launcher).txt

@@ -6,14 +6,14 @@ title: "התקנת boot9strap (Homebrew Launcher)"
 
 #### הוראות
 
-##### Section I - OCS
+##### חלק I - OCS
 
-1. Press (A) to begin
-1. Wait for the downloads to complete
-1. Wait for the exploit to run
+1. תלחצו (A) כדי להתחיל
+1. תחכו לכל ההורדות להסתיים
+1. תחכו לפירצה לרוץ
   + זה יכול לקחת כמה נסיונות
-  + If it freezes, just force the console to power off by holding the power button, then relaunch OCS to try again
-  + If you get a "PM INIT FAILED" error, try replacing the `safehax.3dsx` file in the `/3ds/` folder on your SD card with the one from the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+  + אם זה נקפא, כבו בכוח את המכשיר על-ידי החזקת כפתור ההדלקה ולאחר מכן תפעילו מחדש את OCS כדי לנסות שוב
+  אם אתם מקבלים את השגיאה "PM INIT FAILED", תנסו להחליף את הקובץ `safehax.3dsx` בתיקיית `/3ds/` עם האחד מ[גרסת r19 של safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
 1. כעת אתם אמורים להיכנס לתוך SafeB9SInstaller
 
 #### חלק II - התקנת boot9strap

_pages/he_IL/installing-boot9strap-(mset).txt

@@ -9,7 +9,7 @@ title: "התקנת boot9strap (MSET)"
 * הגרסה העדכנית של [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)*
 * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest)
 * כל כרטיס פריצה של DS שעובד על הגרסה של המכשיר שלכם (לא SKY3DS)
 
 #### הוראות
@@ -18,7 +18,7 @@ title: "התקנת boot9strap (MSET)"
 
 1. תכבו את המכשיר
 1. תכניסו את ה-SD שלכם למחשב
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD
 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם
 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap`
 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם

_pages/he_IL/installing-boot9strap-(ntrboot).txt

@@ -9,7 +9,7 @@ title: "התקנת boot9strap (ntrboot)"
 * הגרסה העדכנית של [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)*
 * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
-* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest)
 
 #### הוראות
 
@@ -17,7 +17,7 @@ title: "התקנת boot9strap (ntrboot)"
 
 1. תכבו את המכשיר
 1. תכניסו את ה-SD שלכם למחשב
-1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD
 1. תעתיקו את `SafeB9SInstaller.firm` אל שורש כרטיס ה SD שלכם ותשכתבו אותו אל `boot.firm`
 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap`
 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם

_pages/he_IL/updating-b9s.txt

@@ -51,6 +51,9 @@ title: "עדכון B9S"
 
 ##### חלק III - ניקוי ה SD
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. תפתחו את GodMode9 על ידי החזקה של המקש (Start) בעת ההדלקה
 1. אם תתבקשו לעשות גיבוי של קבצים חיוניים, תלחצו (A) כדי לעשות זאת, ואז תלחצו (A) כדי להמשיך אחרי שזה סיים
 1. תלחצו על (Home) כדי להראות את תפריט הפעולה

_pages/hu_HU/a9lh-to-b9s.txt

@@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VIII - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Scripts..."

_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}
 

_pages/hu_HU/home.txt

@@ -11,6 +11,9 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
+Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started.
+{: .notice--warning}
+
 {% capture notice-home %}
 This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_!    
 If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide).
@@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to
 This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents!
 {: .notice--success}
 
-Read all of the introductory pages before proceeding.
-{: .notice--warning}
-
 ## What is Homebrew?
 
 [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems.

_pages/hu_HU/homebrew-launcher-(alternatives).txt

@@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the
 #### What you need
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Power off your device
 1. Insert your SD card into your computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher:

_pages/hu_HU/homebrew-launcher-(soundhax).txt

@@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo
 #### What you need
 
 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest)
+* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)*
 
 #### Instructions
 
 1. Power off your device
 1. Insert your SD card into your computer
 1. Copy `boot.3dsx` (OCS) to the root of your SD card
+1. Copy the Soundhax `.m4a` to the root of your SD card
+1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Launch Nintendo 3DS Sound

_pages/hu_HU/updating-b9s.txt

@@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card.
 
 ##### Section III - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Launch GodMode9 by holding (Start) during boot
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. Press (Home) to bring up the action menu

_pages/id_ID/a9lh-to-b9s.txt

@@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VIII - Cleanup SD Card
 
+Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card!
+{: .notice--danger}
+
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Scripts..."

_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt

@@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s
   + R4i Ultra : <= 4.3.0
   + Infinity 3 R4i : <= 11.5.0
 
+Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information.
+
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}