N-archive/Guide_3DS
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

New Crowdin updates (#2034)

Browse source 
* New translations installing-boot9strap-(safeb9sinstaller).txt (Finnish)

* New translations installing-boot9strap-(fredtool).txt (Greek)

* New translations installing-boot9strap-(soundhax).txt (Finnish)

* New translations installing-boot9strap-(fredtool).txt (Finnish)

* New translations installing-boot9strap-(usm).txt (Finnish)

* New translations installing-boot9strap-(pichaxx).txt (Finnish)

* New translations restoring-updating-cfw.txt (Finnish)

* New translations installing-boot9strap-(kartdlphax).txt (Finnish)

* New translations bannerbomb3-fredtool-(twn).txt (Finnish)

* New translations installing-boot9strap-(soundhax).txt (Greek)

* New translations installing-boot9strap-(usm).txt (Czech)

* New translations installing-boot9strap-(fredtool).txt (German)

* New translations installing-boot9strap-(pichaxx).txt (Czech)

* New translations restoring-updating-cfw.txt (Czech)

* New translations installing-boot9strap-(kartdlphax).txt (Czech)

* New translations bannerbomb3-fredtool-(twn).txt (Czech)

* New translations finalizing-setup.txt (German)

* New translations installing-boot9strap-(safeb9sinstaller).txt (German)

* New translations updating-b9s.txt (German)

* New translations installing-boot9strap-(soundhax).txt (German)

* New translations installing-boot9strap-(usm).txt (German)

* New translations installing-boot9strap-(pichaxx).txt (German)

* New translations restoring-updating-cfw.txt (German)

* New translations installing-boot9strap-(kartdlphax).txt (German)

* New translations bannerbomb3-fredtool-(twn).txt (German)

* New translations finalizing-setup.txt (Greek)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Greek)

* New translations updating-b9s.txt (Greek)

* New translations finalizing-setup.txt (Hebrew)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Hebrew)

* New translations updating-b9s.txt (Italian)

* New translations installing-boot9strap-(soundhax).txt (Italian)

* New translations installing-boot9strap-(fredtool).txt (Italian)

* New translations installing-boot9strap-(usm).txt (Italian)

* New translations installing-boot9strap-(pichaxx).txt (Italian)

* New translations restoring-updating-cfw.txt (Italian)

* New translations bannerbomb3-fredtool-(twn).txt (Italian)

* New translations finalizing-setup.txt (Japanese)

* New translations updating-b9s.txt (Japanese)

* New translations installing-boot9strap-(fredtool).txt (Japanese)

* New translations installing-boot9strap-(usm).txt (Japanese)

* New translations bannerbomb3-fredtool-(twn).txt (Japanese)

* New translations finalizing-setup.txt (Korean)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Korean)

* New translations updating-b9s.txt (Korean)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Italian)

* New translations bannerbomb3-fredtool-(twn).txt (Hungarian)

* New translations updating-b9s.txt (Hebrew)

* New translations installing-boot9strap-(soundhax).txt (Hebrew)

* New translations installing-boot9strap-(fredtool).txt (Hebrew)

* New translations installing-boot9strap-(usm).txt (Hebrew)

* New translations installing-boot9strap-(pichaxx).txt (Hebrew)

* New translations restoring-updating-cfw.txt (Hebrew)

* New translations installing-boot9strap-(kartdlphax).txt (Hebrew)

* New translations bannerbomb3-fredtool-(twn).txt (Hebrew)

* New translations finalizing-setup.txt (Hungarian)

* New translations installing-boot9strap-(kartdlphax).txt (Hungarian)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Hungarian)

* New translations updating-b9s.txt (Hungarian)

* New translations installing-boot9strap-(soundhax).txt (Hungarian)

* New translations installing-boot9strap-(fredtool).txt (Hungarian)

* New translations installing-boot9strap-(usm).txt (Hungarian)

* New translations installing-boot9strap-(pichaxx).txt (Hungarian)

* New translations restoring-updating-cfw.txt (Hungarian)

* New translations installing-boot9strap-(soundhax).txt (Korean)

* New translations installing-boot9strap-(soundhax).txt (Norwegian)

* New translations installing-boot9strap-(fredtool).txt (Norwegian)

* New translations installing-boot9strap-(usm).txt (Norwegian)

* New translations installing-boot9strap-(pichaxx).txt (Norwegian)

* New translations restoring-updating-cfw.txt (Norwegian)

* New translations installing-boot9strap-(kartdlphax).txt (Norwegian)

* New translations bannerbomb3-fredtool-(twn).txt (Norwegian)

* New translations finalizing-setup.txt (Polish)

* New translations updating-b9s.txt (Norwegian)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Polish)

* New translations updating-b9s.txt (Polish)

* New translations installing-boot9strap-(soundhax).txt (Polish)

* New translations installing-boot9strap-(fredtool).txt (Polish)

* New translations installing-boot9strap-(usm).txt (Polish)

* New translations installing-boot9strap-(pichaxx).txt (Polish)

* New translations restoring-updating-cfw.txt (Polish)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Norwegian)

* New translations installing-boot9strap-(fredtool).txt (Korean)

* New translations updating-b9s.txt (Dutch)

* New translations installing-boot9strap-(usm).txt (Korean)

* New translations installing-boot9strap-(pichaxx).txt (Korean)

* New translations restoring-updating-cfw.txt (Korean)

* New translations installing-boot9strap-(kartdlphax).txt (Korean)

* New translations bannerbomb3-fredtool-(twn).txt (Korean)

* New translations finalizing-setup.txt (Dutch)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Dutch)

* New translations finalizing-setup.txt (Norwegian)

* New translations installing-boot9strap-(soundhax).txt (Dutch)

* New translations installing-boot9strap-(fredtool).txt (Dutch)

* New translations installing-boot9strap-(usm).txt (Dutch)

* New translations installing-boot9strap-(pichaxx).txt (Dutch)

* New translations restoring-updating-cfw.txt (Dutch)

* New translations installing-boot9strap-(kartdlphax).txt (Dutch)

* New translations bannerbomb3-fredtool-(twn).txt (Dutch)

* New translations installing-boot9strap-(kartdlphax).txt (Polish)

* New translations bannerbomb3-fredtool-(twn).txt (Polish)

* New translations bannerbomb3-fredtool-(twn).txt (Russian)

* New translations finalizing-setup.txt (Swedish)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Swedish)

* New translations updating-b9s.txt (Swedish)

* New translations installing-boot9strap-(soundhax).txt (Swedish)

* New translations installing-boot9strap-(fredtool).txt (Swedish)

* New translations installing-boot9strap-(usm).txt (Swedish)

* New translations restoring-updating-cfw.txt (Russian)

* New translations installing-boot9strap-(pichaxx).txt (Swedish)

* New translations restoring-updating-cfw.txt (Swedish)

* New translations installing-boot9strap-(kartdlphax).txt (Swedish)

* New translations bannerbomb3-fredtool-(twn).txt (Swedish)

* New translations finalizing-setup.txt (Turkish)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Turkish)

* New translations updating-b9s.txt (Turkish)

* New translations installing-boot9strap-(soundhax).txt (Turkish)

* New translations installing-boot9strap-(kartdlphax).txt (Russian)

* New translations installing-boot9strap-(pichaxx).txt (Russian)

* New translations restoring-updating-cfw.txt (Portuguese)

* New translations finalizing-setup.txt (Portuguese)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Portuguese)

* New translations updating-b9s.txt (Portuguese)

* New translations installing-boot9strap-(soundhax).txt (Portuguese)

* New translations installing-boot9strap-(fredtool).txt (Portuguese)

* New translations installing-boot9strap-(usm).txt (Portuguese)

* New translations installing-boot9strap-(pichaxx).txt (Portuguese)

* New translations installing-boot9strap-(kartdlphax).txt (Portuguese)

* New translations installing-boot9strap-(usm).txt (Russian)

* New translations bannerbomb3-fredtool-(twn).txt (Portuguese)

* New translations finalizing-setup.txt (Russian)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Russian)

* New translations updating-b9s.txt (Russian)

* New translations installing-boot9strap-(soundhax).txt (Russian)

* New translations installing-boot9strap-(fredtool).txt (Russian)

* New translations installing-boot9strap-(fredtool).txt (Turkish)

* New translations installing-boot9strap-(soundhax).txt (Chinese Traditional)

* New translations installing-boot9strap-(usm).txt (Chinese Simplified)

* New translations installing-boot9strap-(pichaxx).txt (Chinese Simplified)

* New translations restoring-updating-cfw.txt (Chinese Simplified)

* New translations bannerbomb3-fredtool-(twn).txt (Chinese Simplified)

* New translations finalizing-setup.txt (Chinese Traditional)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Chinese Traditional)

* New translations updating-b9s.txt (Chinese Traditional)

* New translations installing-boot9strap-(fredtool).txt (Chinese Traditional)

* New translations installing-boot9strap-(usm).txt (Chinese Traditional)

* New translations installing-boot9strap-(pichaxx).txt (Chinese Traditional)

* New translations restoring-updating-cfw.txt (Chinese Traditional)

* New translations installing-boot9strap-(kartdlphax).txt (Chinese Traditional)

* New translations bannerbomb3-fredtool-(twn).txt (Chinese Traditional)

* New translations finalizing-setup.txt (Vietnamese)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Vietnamese)

* New translations installing-boot9strap-(fredtool).txt (Chinese Simplified)

* New translations installing-boot9strap-(soundhax).txt (Ukrainian)

* New translations installing-boot9strap-(usm).txt (Turkish)

* New translations installing-boot9strap-(pichaxx).txt (Turkish)

* New translations restoring-updating-cfw.txt (Turkish)

* New translations installing-boot9strap-(kartdlphax).txt (Turkish)

* New translations bannerbomb3-fredtool-(twn).txt (Turkish)

* New translations finalizing-setup.txt (Ukrainian)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Ukrainian)

* New translations updating-b9s.txt (Ukrainian)

* New translations installing-boot9strap-(fredtool).txt (Ukrainian)

* New translations installing-boot9strap-(soundhax).txt (Chinese Simplified)

* New translations installing-boot9strap-(usm).txt (Ukrainian)

* New translations installing-boot9strap-(pichaxx).txt (Ukrainian)

* New translations restoring-updating-cfw.txt (Ukrainian)

* New translations installing-boot9strap-(kartdlphax).txt (Ukrainian)

* New translations bannerbomb3-fredtool-(twn).txt (Ukrainian)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Chinese Simplified)

* New translations updating-b9s.txt (Chinese Simplified)

* New translations updating-b9s.txt (Vietnamese)

* New translations bannerbomb3-fredtool-(twn).txt (Vietnamese)

* New translations installing-boot9strap-(soundhax).txt (Vietnamese)

* New translations updating-b9s.txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Portuguese, Brazilian)

* New translations finalizing-setup.txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(kartdlphax).txt (Vietnamese)

* New translations restoring-updating-cfw.txt (Vietnamese)

* New translations installing-boot9strap-(pichaxx).txt (Vietnamese)

* New translations installing-boot9strap-(usm).txt (Vietnamese)

* New translations installing-boot9strap-(fredtool).txt (Vietnamese)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Thai)

* New translations restoring-updating-cfw.txt (Indonesian)

* New translations installing-boot9strap-(kartdlphax).txt (Indonesian)

* New translations bannerbomb3-fredtool-(twn).txt (Indonesian)

* New translations finalizing-setup.txt (Thai)

* New translations installing-boot9strap-(pichaxx).txt (Thai)

* New translations updating-b9s.txt (Thai)

* New translations installing-boot9strap-(soundhax).txt (Thai)

* New translations installing-boot9strap-(fredtool).txt (Thai)

* New translations installing-boot9strap-(usm).txt (Thai)

* New translations installing-boot9strap-(usm).txt (Indonesian)

* New translations installing-boot9strap-(pichaxx).txt (Indonesian)

* New translations finalizing-setup.txt (Indonesian)

* New translations restoring-updating-cfw.txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(soundhax).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(fredtool).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(usm).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(pichaxx).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(kartdlphax).txt (Portuguese, Brazilian)

* New translations bannerbomb3-fredtool-(twn).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Indonesian)

* New translations updating-b9s.txt (Indonesian)

* New translations installing-boot9strap-(soundhax).txt (Indonesian)

* New translations installing-boot9strap-(fredtool).txt (Indonesian)

* New translations restoring-updating-cfw.txt (Thai)

* New translations installing-boot9strap-(kartdlphax).txt (Thai)

* New translations updating-b9s.txt (Pirate English)

* New translations installing-boot9strap-(usm).txt (Malay)

* New translations installing-boot9strap-(pichaxx).txt (Malay)

* New translations restoring-updating-cfw.txt (Malay)

* New translations installing-boot9strap-(kartdlphax).txt (Malay)

* New translations bannerbomb3-fredtool-(twn).txt (Malay)

* New translations finalizing-setup.txt (Pirate English)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Pirate English)

* New translations installing-boot9strap-(soundhax).txt (Pirate English)

* New translations installing-boot9strap-(fredtool).txt (Pirate English)

* New translations installing-boot9strap-(usm).txt (Pirate English)

* New translations installing-boot9strap-(pichaxx).txt (Pirate English)

* New translations restoring-updating-cfw.txt (Pirate English)

* New translations installing-boot9strap-(kartdlphax).txt (Pirate English)

* New translations installing-boot9strap-(fredtool).txt (Malay)

* New translations bannerbomb3-fredtool-(twn).txt (Thai)

* New translations finalizing-setup.txt (Croatian)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Croatian)

* New translations updating-b9s.txt (Croatian)

* New translations installing-boot9strap-(soundhax).txt (Croatian)

* New translations installing-boot9strap-(fredtool).txt (Croatian)

* New translations installing-boot9strap-(usm).txt (Croatian)

* New translations installing-boot9strap-(soundhax).txt (Malay)

* New translations installing-boot9strap-(pichaxx).txt (Croatian)

* New translations restoring-updating-cfw.txt (Croatian)

* New translations installing-boot9strap-(kartdlphax).txt (Croatian)

* New translations bannerbomb3-fredtool-(twn).txt (Croatian)

* New translations finalizing-setup.txt (Malay)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Malay)

* New translations updating-b9s.txt (Malay)

* New translations bannerbomb3-fredtool-(twn).txt (Pirate English)

* New translations installing-boot9strap-(hardmod).txt (Dutch)

* New translations installing-boot9strap-(ntrboot).txt (Dutch)

* New translations finalizing-setup.txt (Dutch)

* New translations installing-boot9strap-(safeb9sinstaller).txt (Dutch)

* New translations updating-b9s.txt (Dutch)

* New translations installing-boot9strap-(soundhax).txt (Dutch)

* New translations installing-boot9strap-(fredtool).txt (Dutch)

* New translations installing-boot9strap-(usm).txt (Dutch)

* New translations installing-boot9strap-(pichaxx).txt (Dutch)

* New translations installing-boot9strap-(kartdlphax).txt (Dutch)

* New translations bannerbomb3-fredtool-(twn).txt (Dutch)
This commit is contained in:
ihaveahax 2022-06-07 04:45:17 -07:00 committed by GitHub
parent a0736e07ca
commit de82ea656c
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
418 changed files with 2080 additions and 4416 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
_pages/ar_SA/a9lh-to-b9s.txt
View file

@ -63,12 +63,8 @@ For all steps in this section, overwrite any existing files on your SD card.
+ If you get an "OTP Crypto Fail" error, download <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. When prompted, input the key combo given to install boot9strap
1. Once it is complete, press (A) to reboot your device
+ If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
#### Section III - Configuring Luma3DS
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Press (Start) to save and reboot
___

24
_pages/ar_SA/bannerbomb3-fredtool-(twn).txt
View file

@ -125,21 +125,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section VI - Configuring Luma3DS
1. Boot your device while holding (Select) to launch the Luma configuration menu
+ If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+ If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
1. Use the (A) button and the D-Pad to turn on the following:
+ “Show NAND or user string in System Settings”
1. Press (Start) to save and reboot
#### Section VII - Restoring DS Download Play
#### Section VI - Luma3DS Verification
1. Power off your device
1. Insert your SD card into your computer
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VII - Restoring DS Download Play
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` on your SD card
1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Reinsert your SD card into your device

11
_pages/ar_SA/finalizing-setup.txt
View file

@ -132,11 +132,6 @@ These screenshots indicate the minimum SD card layout that is required to follow
+ If you get an error, make sure that you have at least 1.3GB of free space on your SD card
1. Press (A) to continue
1. Press (B) to return to the main menu
1. Select "Dump Options"
1. Select "Dump Boot9.bin & Boot11.bin"
1. When prompted, press (A) to proceed
1. Press (A) to continue
1. Press (B) to return to the main menu
1. Select "Exit"
1. Press (A) to relock write permissions if prompted
1. Navigate to `[S:] SYSNAND VIRTUAL`
@ -147,10 +142,12 @@ These screenshots indicate the minimum SD card layout that is required to follow
1. Press (Home) to bring up the action menu
1. Select "Poweroff system" to power off your device
1. Insert your SD card into your computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, `essential.exefs`, `<serialnumber>_boot9_###.bin`, and `<serialnumber>_boot11_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Make backups in multiple locations (such as online file storage)
1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
1. Delete `<date>_<serialnumber>_sysnand_###.bin` and `<date>_<serialnumber>_sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+ The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Reinsert your SD card into your device
1. Power on your device

27
_pages/ar_SA/installing-boot9strap-(fredtool).txt
View file

@ -86,24 +86,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section V - Configuring Luma3DS
1. Boot your device while holding (Select) to launch the Luma configuration menu
+ If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
#### Section VI - Restoring DS Connection Settings
#### Section V - Luma3DS Verification
1. Power off your device
1. Insert your SD card into your computer
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring DS Connection Settings
1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool.zip`) to the `Nintendo 3DS/<ID0>/<ID1>/Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert your SD card into your device

11
_pages/ar_SA/installing-boot9strap-(hardmod).txt
View file

@ -82,19 +82,14 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
1. Power off your device
1. Disconnect your hardmod
1. Power on your device
#### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/ar_SA/installing-boot9strap-(kartdlphax).txt
View file

@ -69,21 +69,17 @@ On the **target 3DS** (the 3DS that you are trying to modify):
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into SafeB9SInstaller
#### Section IV - SafeB9SInstaller
#### Section IV - Installing boot9strap
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
1. Use the (A) button and the D-Pad to turn on the following:
- **"Show NAND or user string in System Settings"**
+ If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
+ You will **not** need to use your **source 3DS** to complete any further steps on this guide.
___

9
_pages/ar_SA/installing-boot9strap-(ntrboot).txt
View file

@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. Reinsert your SD card into your device
1. Power on your device
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/ar_SA/installing-boot9strap-(pichaxx).txt
View file

@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
#### Section IV - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
At this point, Pokémon Picross is no longer necessary and can be removed from your device. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}

12
_pages/ar_SA/installing-boot9strap-(safeb9sinstaller).txt
View file

@ -22,19 +22,15 @@ title: "Installing boot9strap (SafeB9SInstaller)"
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section III - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/ar_SA/installing-boot9strap-(soundhax).txt
View file

@ -60,20 +60,15 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section IV - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/ar_SA/installing-boot9strap-(usm).txt
View file

@ -84,21 +84,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring WiFi Configuration Profiles
#### Section V - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`

35
_pages/ar_SA/restoring-updating-cfw.txt
View file

@ -12,12 +12,9 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
### What You Need
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
### Instructions
#### Section I - Prep Work
1. Insert your SD card into your computer
1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
@ -25,36 +22,10 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
+ If the `luma` or `payloads` folder doesn't exist, create them
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card, merging it with any existing folder and replacing any existing files
1. Reinsert your SD card into your device
1. Power on your device
+ If you see the Luma3DS configuration menu, press (Start) to save and reboot
#### Section II - Configuring Luma3DS
1. Press and hold (Select), and while holding (Select), power on your device
* You should now see a Luma3DS configuration menu
1. Use the (A) button and the D-Pad to turn on the following:
* **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
#### Section III - CTRNAND Luma3DS
1. Power off your device
1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+ If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
1. Press (Home) to bring up the action menu
1. Select "Scripts..."
1. Select "GM9Megascript"
1. Select "Scripts from Plailect's Guide"
1. Select "Setup Luma3DS to CTRNAND"
+ This will copy the updated version of Luma3DS to internal memory so that your device will be able to boot without an SD card inserted
1. When prompted, press (A) to proceed
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
1. Press (A) to continue
1. Press (B), then navigate to "Exit" to exit GM9Megascript
+ When prompted, relock write permissions
1. Press (Home) to bring up the action menu
1. Select "Poweroff system" to power off your device
The latest version of Luma3DS has been installed on your SD card and on internal memory.
The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___

10
_pages/ar_SA/updating-b9s.txt
View file

@ -50,15 +50,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert your SD card into your device
1. Power on your device
#### Section IV - Configuring Luma3DS
This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot.
{: .notice--info}
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___

8
_pages/bg_BG/a9lh-to-b9s.txt
View file

@ -63,12 +63,8 @@ For all steps in this section, overwrite any existing files on your SD card.
+ If you get an "OTP Crypto Fail" error, download <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. When prompted, input the key combo given to install boot9strap
1. Once it is complete, press (A) to reboot your device
+ If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
#### Section III - Configuring Luma3DS
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Press (Start) to save and reboot
___

24
_pages/bg_BG/bannerbomb3-fredtool-(twn).txt
View file

@ -125,21 +125,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section VI - Configuring Luma3DS
1. Boot your device while holding (Select) to launch the Luma configuration menu
+ If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+ If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
1. Use the (A) button and the D-Pad to turn on the following:
+ “Show NAND or user string in System Settings”
1. Press (Start) to save and reboot
#### Section VII - Restoring DS Download Play
#### Section VI - Luma3DS Verification
1. Power off your device
1. Insert your SD card into your computer
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VII - Restoring DS Download Play
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` on your SD card
1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Reinsert your SD card into your device

11
_pages/bg_BG/finalizing-setup.txt
View file

@ -132,11 +132,6 @@ These screenshots indicate the minimum SD card layout that is required to follow
+ If you get an error, make sure that you have at least 1.3GB of free space on your SD card
1. Press (A) to continue
1. Press (B) to return to the main menu
1. Select "Dump Options"
1. Select "Dump Boot9.bin & Boot11.bin"
1. When prompted, press (A) to proceed
1. Press (A) to continue
1. Press (B) to return to the main menu
1. Select "Exit"
1. Press (A) to relock write permissions if prompted
1. Navigate to `[S:] SYSNAND VIRTUAL`
@ -147,10 +142,12 @@ These screenshots indicate the minimum SD card layout that is required to follow
1. Press (Home) to bring up the action menu
1. Select "Poweroff system" to power off your device
1. Insert your SD card into your computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, `essential.exefs`, `<serialnumber>_boot9_###.bin`, and `<serialnumber>_boot11_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Make backups in multiple locations (such as online file storage)
1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
1. Delete `<date>_<serialnumber>_sysnand_###.bin` and `<date>_<serialnumber>_sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+ The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Reinsert your SD card into your device
1. Power on your device

27
_pages/bg_BG/installing-boot9strap-(fredtool).txt
View file

@ -86,24 +86,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section V - Configuring Luma3DS
1. Boot your device while holding (Select) to launch the Luma configuration menu
+ If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
#### Section VI - Restoring DS Connection Settings
#### Section V - Luma3DS Verification
1. Power off your device
1. Insert your SD card into your computer
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring DS Connection Settings
1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool.zip`) to the `Nintendo 3DS/<ID0>/<ID1>/Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert your SD card into your device

11
_pages/bg_BG/installing-boot9strap-(hardmod).txt
View file

@ -82,19 +82,14 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
1. Power off your device
1. Disconnect your hardmod
1. Power on your device
#### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/bg_BG/installing-boot9strap-(kartdlphax).txt
View file

@ -69,21 +69,17 @@ On the **target 3DS** (the 3DS that you are trying to modify):
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into SafeB9SInstaller
#### Section IV - SafeB9SInstaller
#### Section IV - Installing boot9strap
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
1. Use the (A) button and the D-Pad to turn on the following:
- **"Show NAND or user string in System Settings"**
+ If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
+ You will **not** need to use your **source 3DS** to complete any further steps on this guide.
___

9
_pages/bg_BG/installing-boot9strap-(ntrboot).txt
View file

@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. Reinsert your SD card into your device
1. Power on your device
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/bg_BG/installing-boot9strap-(pichaxx).txt
View file

@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
#### Section IV - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
At this point, Pokémon Picross is no longer necessary and can be removed from your device. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}

12
_pages/bg_BG/installing-boot9strap-(safeb9sinstaller).txt
View file

@ -22,19 +22,15 @@ title: "Installing boot9strap (SafeB9SInstaller)"
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section III - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/bg_BG/installing-boot9strap-(soundhax).txt
View file

@ -60,20 +60,15 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section IV - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/bg_BG/installing-boot9strap-(usm).txt
View file

@ -84,21 +84,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring WiFi Configuration Profiles
#### Section V - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`

35
_pages/bg_BG/restoring-updating-cfw.txt
View file

@ -12,12 +12,9 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
### What You Need
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
### Instructions
#### Section I - Prep Work
1. Insert your SD card into your computer
1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
@ -25,36 +22,10 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
+ If the `luma` or `payloads` folder doesn't exist, create them
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card, merging it with any existing folder and replacing any existing files
1. Reinsert your SD card into your device
1. Power on your device
+ If you see the Luma3DS configuration menu, press (Start) to save and reboot
#### Section II - Configuring Luma3DS
1. Press and hold (Select), and while holding (Select), power on your device
* You should now see a Luma3DS configuration menu
1. Use the (A) button and the D-Pad to turn on the following:
* **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
#### Section III - CTRNAND Luma3DS
1. Power off your device
1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+ If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
1. Press (Home) to bring up the action menu
1. Select "Scripts..."
1. Select "GM9Megascript"
1. Select "Scripts from Plailect's Guide"
1. Select "Setup Luma3DS to CTRNAND"
+ This will copy the updated version of Luma3DS to internal memory so that your device will be able to boot without an SD card inserted
1. When prompted, press (A) to proceed
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
1. Press (A) to continue
1. Press (B), then navigate to "Exit" to exit GM9Megascript
+ When prompted, relock write permissions
1. Press (Home) to bring up the action menu
1. Select "Poweroff system" to power off your device
The latest version of Luma3DS has been installed on your SD card and on internal memory.
The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___

10
_pages/bg_BG/updating-b9s.txt
View file

@ -50,15 +50,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert your SD card into your device
1. Power on your device
#### Section IV - Configuring Luma3DS
This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot.
{: .notice--info}
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___

8
_pages/ca_ES/a9lh-to-b9s.txt
View file

@ -63,12 +63,8 @@ For all steps in this section, overwrite any existing files on your SD card.
+ If you get an "OTP Crypto Fail" error, download <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. When prompted, input the key combo given to install boot9strap
1. Once it is complete, press (A) to reboot your device
+ If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
#### Section III - Configuring Luma3DS
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Press (Start) to save and reboot
___

24
_pages/ca_ES/bannerbomb3-fredtool-(twn).txt
View file

@ -125,21 +125,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section VI - Configuring Luma3DS
1. Boot your device while holding (Select) to launch the Luma configuration menu
+ If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+ If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
1. Use the (A) button and the D-Pad to turn on the following:
+ “Show NAND or user string in System Settings”
1. Press (Start) to save and reboot
#### Section VII - Restoring DS Download Play
#### Section VI - Luma3DS Verification
1. Power off your device
1. Insert your SD card into your computer
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VII - Restoring DS Download Play
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` on your SD card
1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Reinsert your SD card into your device

11
_pages/ca_ES/finalizing-setup.txt
View file

@ -132,11 +132,6 @@ These screenshots indicate the minimum SD card layout that is required to follow
+ If you get an error, make sure that you have at least 1.3GB of free space on your SD card
1. Press (A) to continue
1. Press (B) to return to the main menu
1. Select "Dump Options"
1. Select "Dump Boot9.bin & Boot11.bin"
1. When prompted, press (A) to proceed
1. Press (A) to continue
1. Press (B) to return to the main menu
1. Select "Exit"
1. Press (A) to relock write permissions if prompted
1. Navigate to `[S:] SYSNAND VIRTUAL`
@ -147,10 +142,12 @@ These screenshots indicate the minimum SD card layout that is required to follow
1. Press (Home) to bring up the action menu
1. Select "Poweroff system" to power off your device
1. Insert your SD card into your computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, `essential.exefs`, `<serialnumber>_boot9_###.bin`, and `<serialnumber>_boot11_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Make backups in multiple locations (such as online file storage)
1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
1. Delete `<date>_<serialnumber>_sysnand_###.bin` and `<date>_<serialnumber>_sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+ The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Reinsert your SD card into your device
1. Power on your device

27
_pages/ca_ES/installing-boot9strap-(fredtool).txt
View file

@ -86,24 +86,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section V - Configuring Luma3DS
1. Boot your device while holding (Select) to launch the Luma configuration menu
+ If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
#### Section VI - Restoring DS Connection Settings
#### Section V - Luma3DS Verification
1. Power off your device
1. Insert your SD card into your computer
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring DS Connection Settings
1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool.zip`) to the `Nintendo 3DS/<ID0>/<ID1>/Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert your SD card into your device

11
_pages/ca_ES/installing-boot9strap-(hardmod).txt
View file

@ -82,19 +82,14 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
1. Power off your device
1. Disconnect your hardmod
1. Power on your device
#### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/ca_ES/installing-boot9strap-(kartdlphax).txt
View file

@ -69,21 +69,17 @@ On the **target 3DS** (the 3DS that you are trying to modify):
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into SafeB9SInstaller
#### Section IV - SafeB9SInstaller
#### Section IV - Installing boot9strap
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
1. Use the (A) button and the D-Pad to turn on the following:
- **"Show NAND or user string in System Settings"**
+ If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
+ You will **not** need to use your **source 3DS** to complete any further steps on this guide.
___

9
_pages/ca_ES/installing-boot9strap-(ntrboot).txt
View file

@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. Reinsert your SD card into your device
1. Power on your device
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/ca_ES/installing-boot9strap-(pichaxx).txt
View file

@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
#### Section IV - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
At this point, Pokémon Picross is no longer necessary and can be removed from your device. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}

12
_pages/ca_ES/installing-boot9strap-(safeb9sinstaller).txt
View file

@ -22,19 +22,15 @@ title: "Installing boot9strap (SafeB9SInstaller)"
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section III - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/ca_ES/installing-boot9strap-(soundhax).txt
View file

@ -60,20 +60,15 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section IV - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/ca_ES/installing-boot9strap-(usm).txt
View file

@ -84,21 +84,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring WiFi Configuration Profiles
#### Section V - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`

35
_pages/ca_ES/restoring-updating-cfw.txt
View file

@ -12,12 +12,9 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
### What You Need
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
### Instructions
#### Section I - Prep Work
1. Insert your SD card into your computer
1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
@ -25,36 +22,10 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
+ If the `luma` or `payloads` folder doesn't exist, create them
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card, merging it with any existing folder and replacing any existing files
1. Reinsert your SD card into your device
1. Power on your device
+ If you see the Luma3DS configuration menu, press (Start) to save and reboot
#### Section II - Configuring Luma3DS
1. Press and hold (Select), and while holding (Select), power on your device
* You should now see a Luma3DS configuration menu
1. Use the (A) button and the D-Pad to turn on the following:
* **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
#### Section III - CTRNAND Luma3DS
1. Power off your device
1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+ If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
1. Press (Home) to bring up the action menu
1. Select "Scripts..."
1. Select "GM9Megascript"
1. Select "Scripts from Plailect's Guide"
1. Select "Setup Luma3DS to CTRNAND"
+ This will copy the updated version of Luma3DS to internal memory so that your device will be able to boot without an SD card inserted
1. When prompted, press (A) to proceed
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
1. Press (A) to continue
1. Press (B), then navigate to "Exit" to exit GM9Megascript
+ When prompted, relock write permissions
1. Press (Home) to bring up the action menu
1. Select "Poweroff system" to power off your device
The latest version of Luma3DS has been installed on your SD card and on internal memory.
The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___

10
_pages/ca_ES/updating-b9s.txt
View file

@ -50,15 +50,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert your SD card into your device
1. Power on your device
#### Section IV - Configuring Luma3DS
This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot.
{: .notice--info}
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___

8
_pages/cs_CZ/a9lh-to-b9s.txt
View file

@ -63,12 +63,8 @@ For all steps in this section, overwrite any existing files on your SD card.
+ If you get an "OTP Crypto Fail" error, download <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. When prompted, input the key combo given to install boot9strap
1. Once it is complete, press (A) to reboot your device
+ If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
#### Section III - Configuring Luma3DS
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Press (Start) to save and reboot
___

24
_pages/cs_CZ/bannerbomb3-fredtool-(twn).txt
View file

@ -125,21 +125,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section VI - Configuring Luma3DS
1. Boot your device while holding (Select) to launch the Luma configuration menu
+ If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+ If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
1. Use the (A) button and the D-Pad to turn on the following:
+ “Show NAND or user string in System Settings”
1. Press (Start) to save and reboot
#### Section VII - Restoring DS Download Play
#### Section VI - Luma3DS Verification
1. Power off your device
1. Insert your SD card into your computer
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VII - Restoring DS Download Play
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` on your SD card
1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Reinsert your SD card into your device

11
_pages/cs_CZ/finalizing-setup.txt
View file

@ -132,11 +132,6 @@ These screenshots indicate the minimum SD card layout that is required to follow
+ If you get an error, make sure that you have at least 1.3GB of free space on your SD card
1. Press (A) to continue
1. Press (B) to return to the main menu
1. Select "Dump Options"
1. Select "Dump Boot9.bin & Boot11.bin"
1. When prompted, press (A) to proceed
1. Press (A) to continue
1. Press (B) to return to the main menu
1. Select "Exit"
1. Press (A) to relock write permissions if prompted
1. Navigate to `[S:] SYSNAND VIRTUAL`
@ -147,10 +142,12 @@ These screenshots indicate the minimum SD card layout that is required to follow
1. Press (Home) to bring up the action menu
1. Select "Poweroff system" to power off your device
1. Insert your SD card into your computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, `essential.exefs`, `<serialnumber>_boot9_###.bin`, and `<serialnumber>_boot11_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Make backups in multiple locations (such as online file storage)
1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
1. Delete `<date>_<serialnumber>_sysnand_###.bin` and `<date>_<serialnumber>_sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+ The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Reinsert your SD card into your device
1. Power on your device

27
_pages/cs_CZ/installing-boot9strap-(fredtool).txt
View file

@ -86,24 +86,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section V - Configuring Luma3DS
1. Boot your device while holding (Select) to launch the Luma configuration menu
+ If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
#### Section VI - Restoring DS Connection Settings
#### Section V - Luma3DS Verification
1. Power off your device
1. Insert your SD card into your computer
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring DS Connection Settings
1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool.zip`) to the `Nintendo 3DS/<ID0>/<ID1>/Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert your SD card into your device

11
_pages/cs_CZ/installing-boot9strap-(hardmod).txt
View file

@ -82,19 +82,14 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
1. Power off your device
1. Disconnect your hardmod
1. Power on your device
#### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt
View file

@ -69,21 +69,17 @@ On the **target 3DS** (the 3DS that you are trying to modify):
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into SafeB9SInstaller
#### Section IV - SafeB9SInstaller
#### Section IV - Installing boot9strap
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
1. Use the (A) button and the D-Pad to turn on the following:
- **"Show NAND or user string in System Settings"**
+ If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
+ You will **not** need to use your **source 3DS** to complete any further steps on this guide.
___

9
_pages/cs_CZ/installing-boot9strap-(ntrboot).txt
View file

@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. Reinsert your SD card into your device
1. Power on your device
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/cs_CZ/installing-boot9strap-(pichaxx).txt
View file

@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
#### Section IV - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
At this point, Pokémon Picross is no longer necessary and can be removed from your device. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}

12
_pages/cs_CZ/installing-boot9strap-(safeb9sinstaller).txt
View file

@ -22,19 +22,15 @@ title: "Installing boot9strap (SafeB9SInstaller)"
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section III - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/cs_CZ/installing-boot9strap-(soundhax).txt
View file

@ -60,20 +60,15 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section IV - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/cs_CZ/installing-boot9strap-(usm).txt
View file

@ -84,21 +84,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring WiFi Configuration Profiles
#### Section V - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`

35
_pages/cs_CZ/restoring-updating-cfw.txt
View file

@ -12,12 +12,9 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
### What You Need
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
### Instructions
#### Section I - Prep Work
1. Insert your SD card into your computer
1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
@ -25,36 +22,10 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
+ If the `luma` or `payloads` folder doesn't exist, create them
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card, merging it with any existing folder and replacing any existing files
1. Reinsert your SD card into your device
1. Power on your device
+ If you see the Luma3DS configuration menu, press (Start) to save and reboot
#### Section II - Configuring Luma3DS
1. Press and hold (Select), and while holding (Select), power on your device
* You should now see a Luma3DS configuration menu
1. Use the (A) button and the D-Pad to turn on the following:
* **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
#### Section III - CTRNAND Luma3DS
1. Power off your device
1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+ If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
1. Press (Home) to bring up the action menu
1. Select "Scripts..."
1. Select "GM9Megascript"
1. Select "Scripts from Plailect's Guide"
1. Select "Setup Luma3DS to CTRNAND"
+ This will copy the updated version of Luma3DS to internal memory so that your device will be able to boot without an SD card inserted
1. When prompted, press (A) to proceed
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
1. Press (A) to continue
1. Press (B), then navigate to "Exit" to exit GM9Megascript
+ When prompted, relock write permissions
1. Press (Home) to bring up the action menu
1. Select "Poweroff system" to power off your device
The latest version of Luma3DS has been installed on your SD card and on internal memory.
The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___

10
_pages/cs_CZ/updating-b9s.txt
View file

@ -50,15 +50,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert your SD card into your device
1. Power on your device
#### Section IV - Configuring Luma3DS
This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot.
{: .notice--info}
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___

8
_pages/de_DE/a9lh-to-b9s.txt
View file

@ -63,12 +63,8 @@ Beachte, dass auf dem New 3DS die `secret_sector.bin` benötigt wird, um den arm
+ Bekommst du einen "OTP Crypto Fail"-Fehler, lade <i class="fa fa-magnet" aria-hidden="true" title="Dies ist ein Magnetlink. Use a torrent client to download the file."></i> - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. Gib die Tastenkombination zur Bestätigung ein, wenn danach verlangt wird
1. Once it is complete, press (A) to reboot your device
+ If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
#### Schritt III - Luma3DS konfigurieren
1. Verwende im Konfigurationsmenü von Luma3DS den Knopf (A) und das D-Pad, um folgendes zu aktivieren:
+ **"Show NAND or user string in System Settings"**
1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Drücke (Start) zum Speichern und neustarten
___

24
_pages/de_DE/bannerbomb3-fredtool-(twn).txt
View file

@ -125,21 +125,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+ Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hälst
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section VI - Configuring Luma3DS
1. Starte deinen 3DS während du (Select) gedrückt hälst, um in die Luma3DS-Konfiguration zu gelangen
+ If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+ If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren:
+ “Show NAND or user string in System Settings”
1. Drücke (Start) zum Speichern und neustarten
#### Section VII - Restoring DS Download Play
#### Section VI - Luma3DS Verification
1. Schalte deinen 3DS aus
1. Stecke deine SD-Karte in deinen Computer
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VII - Restoring DS Download Play
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` on your SD card
1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Stecke deine SD-Karte nun wieder in deinen 3DS

11
_pages/de_DE/finalizing-setup.txt
View file

@ -132,11 +132,6 @@ These screenshots indicate the minimum SD card layout that is required to follow
+ If you get an error, make sure that you have at least 1.3GB of free space on your SD card
1. Drücke (A) um fortzufahren
1. Drücke (B), um zum Hauptmenü zurückzukehren
1. Select "Dump Options"
1. Select "Dump Boot9.bin & Boot11.bin"
1. Drücke (A), wenn du dazu aufgefordert wirst, um fortzufahren
1. Drücke (A) um fortzufahren
1. Drücke (B), um zum Hauptmenü zurückzukehren
1. Select "Exit"
1. Drücke (A), um die Schreibrechte zu deaktivieren, wenn du dazu aufgefordert wirst
1. Navigate to `[S:] SYSNAND VIRTUAL`
@ -147,10 +142,12 @@ These screenshots indicate the minimum SD card layout that is required to follow
1. Drücke (HOME) um das Aktionsmenü aufzurufen
1. Select "Poweroff system" to power off your device
1. Stecke deine SD-Karte in deinen Computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, `essential.exefs`, `<serialnumber>_boot9_###.bin`, and `<serialnumber>_boot11_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Erstelle Backup Dateien an mehreren Orten (USB-Stick, PC, Externe Festplatte, Online-Speicher, etc.)
1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ Diese Backups werden im Falle eines Bricks benötigt, um Daten aus dem NAND-Image wieder herzustellen, wenn etwas schief gehen sollte
1. Lösche `<date>_<serialnumber>_sysnand_###.bin` und `<date>_<serialnumber>_sysnand_###.bin.sha`aus dem `/gm9/out/` Ordner der SD-Karte nachdem du diese kopiert hast
+ The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Setze die SD-Karte wieder in die Konsole ein
1. Schalte deine Konsole an

27
_pages/de_DE/installing-boot9strap-(fredtool).txt
View file

@ -86,24 +86,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
+ Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hälst
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section V - Configuring Luma3DS
1. Starte deinen 3DS während du (Select) gedrückt hälst, um in die Luma3DS-Konfiguration zu gelangen
+ If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren:
+ **"Show NAND or user string in System Settings"**
1. Drücke (Start) zum Speichern und neustarten
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
#### Section VI - Restoring DS Connection Settings
#### Section V - Luma3DS Verification
1. Schalte deinen 3DS aus
1. Stecke deine SD-Karte in deinen Computer
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring DS Connection Settings
1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool.zip`) to the `Nintendo 3DS/<ID0>/<ID1>/Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Stecke deine SD-Karte nun wieder in deinen 3DS

11
_pages/de_DE/installing-boot9strap-(hardmod).txt
View file

@ -82,19 +82,14 @@ Dies funktioniert auf mit New 3DS, New 2DS, Old 3DS und Old 2DS auf *allen* Vers
1. Schalte deinen 3DS aus
1. Entferne deinen Hardmod
1. Schalte deine Konsole an
#### Schritt III - Luma3DS konfigurieren
1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Drücke (Start) zum Speichern und neustarten
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/de_DE/installing-boot9strap-(kartdlphax).txt
View file

@ -69,21 +69,17 @@ On the **target 3DS** (the 3DS that you are trying to modify):
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into SafeB9SInstaller
#### Section IV - SafeB9SInstaller
#### Section IV - Installing boot9strap
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren:
- **"Show NAND or user string in System Settings"**
+ If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Drücke (Start) zum Speichern und neustarten
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
+ You will **not** need to use your **source 3DS** to complete any further steps on this guide.
___

9
_pages/de_DE/installing-boot9strap-(ntrboot).txt
View file

@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. Stecke deine SD-Karte wieder in deine Konsole
1. Schalte deine Konsole an
1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Benutze den (A) Knopf und das Steuerkreuz um Folgendes zu aktivieren:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Drücke (Start) um zu Speichern und neu zu starten
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/de_DE/installing-boot9strap-(pichaxx).txt
View file

@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
#### Schritt IV - Luma3DS konfigurieren
1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Drücke (Start) zum Speichern und neustarten
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
At this point, Pokémon Picross is no longer necessary and can be removed from your device. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}

12
_pages/de_DE/installing-boot9strap-(safeb9sinstaller).txt
View file

@ -22,19 +22,15 @@ title: "Installing boot9strap (SafeB9SInstaller)"
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Schritt III - Luma3DS konfigurieren
1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Drücke (Start) zum Speichern und neustarten
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/de_DE/installing-boot9strap-(soundhax).txt
View file

@ -60,20 +60,15 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Schritt IV - Luma3DS konfigurieren
1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Drücke (Start) zum Speichern und neustarten
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/de_DE/installing-boot9strap-(usm).txt
View file

@ -84,21 +84,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Drücke (Start) zum Speichern und neustarten
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring WiFi Configuration Profiles
#### Section V - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`

35
_pages/de_DE/restoring-updating-cfw.txt
View file

@ -12,12 +12,9 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
### Was du brauchst
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
### Anleitung
#### Schritt I - Vorbereitungen
1. Stecke deine SD-Karte in deinen Computer
1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
@ -25,36 +22,10 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
+ If the `luma` or `payloads` folder doesn't exist, create them
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card, merging it with any existing folder and replacing any existing files
1. Stecke deine SD-Karte nun wieder in deinen 3DS
1. Schalte deine Konsole an
+ If you see the Luma3DS configuration menu, press (Start) to save and reboot
#### Section II - Configuring Luma3DS
1. Press and hold (Select), and while holding (Select), power on your device
* You should now see a Luma3DS configuration menu
1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren:
* **"Show NAND or user string in System Settings"**
1. Drücke (Start) zum Speichern und neustarten
#### Section III - CTRNAND Luma3DS
1. Schalte deinen 3DS aus
1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+ If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
1. Wenn du aufgefordert wirst Datum und Uhrzeit der "RTC" (Real Time Clock, Echtzeituhr) zu korrigieren, drücke (A), stelle Datum und Uhrzeit ein und drücke (A) um fortzufahren
1. Drücke (HOME) um das Aktionsmenü aufzurufen
1. Wähle "Scripts"
1. Select "GM9Megascript"
1. Select "Scripts from Plailect's Guide"
1. Select "Setup Luma3DS to CTRNAND"
+ This will copy the updated version of Luma3DS to internal memory so that your device will be able to boot without an SD card inserted
1. Drücke (A), wenn du dazu aufgefordert wirst, um fortzufahren
1. Drücke (A), um die SysNAND (Stufe 1) Bearbeitung zu aktivieren. Dann gebe die angegebene Tastenkombination ein
1. Drücke (A) um fortzufahren
1. Press (B), then navigate to "Exit" to exit GM9Megascript
+ When prompted, relock write permissions
1. Drücke (HOME) um das Aktionsmenü aufzurufen
1. Select "Poweroff system" to power off your device
The latest version of Luma3DS has been installed on your SD card and on internal memory.
The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___

10
_pages/de_DE/updating-b9s.txt
View file

@ -50,15 +50,7 @@ While we believe that custom firmware is safe for online use, there have been on
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Stecke deine SD-Karte nun wieder in deinen 3DS
1. Schalte deine Konsole an
#### Schritt IV - Luma3DS konfigurieren
Dieser Abschnitt wird nur benötigt, wenn du nach dem Neustart im Luma3DS-Konfigurationsmenü landest.
{: .notice--info}
1. Verwende im Konfigurationsmenü von Luma3DS den Knopf (A) und das D-Pad, um folgendes zu aktivieren:
+ **"Show NAND or user string in System Settings"**
1. Drücke (Start) zum Speichern und neustarten
1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___

8
_pages/el_GR/a9lh-to-b9s.txt
View file

@ -63,12 +63,8 @@ For all steps in this section, overwrite any existing files on your SD card.
+ If you get an "OTP Crypto Fail" error, download <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. When prompted, input the key combo given to install boot9strap
1. Once it is complete, press (A) to reboot your device
+ If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
#### Section III - Configuring Luma3DS
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
___

24
_pages/el_GR/bannerbomb3-fredtool-(twn).txt
View file

@ -125,21 +125,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section VI - Configuring Luma3DS
1. Boot your device while holding (Select) to launch the Luma configuration menu
+ If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+ If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
1. Use the (A) button and the D-Pad to turn on the following:
+ “Show NAND or user string in System Settings”
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
#### Section VII - Restoring DS Download Play
#### Section VI - Luma3DS Verification
1. Power off your device
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VII - Restoring DS Download Play
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` on your SD card
1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Reinsert your SD card into your device

11
_pages/el_GR/finalizing-setup.txt
View file

@ -132,11 +132,6 @@ These screenshots indicate the minimum SD card layout that is required to follow
+ If you get an error, make sure that you have at least 1.3GB of free space on your SD card
1. Πατήστε (A) για να συνεχίσετε
1. Press (B) to return to the main menu
1. Select "Dump Options"
1. Select "Dump Boot9.bin & Boot11.bin"
1. When prompted, press (A) to proceed
1. Πατήστε (A) για να συνεχίσετε
1. Press (B) to return to the main menu
1. Select "Exit"
1. Press (A) to relock write permissions if prompted
1. Navigate to `[S:] SYSNAND VIRTUAL`
@ -147,10 +142,12 @@ These screenshots indicate the minimum SD card layout that is required to follow
1. Press (Home) to bring up the action menu
1. Select "Poweroff system" to power off your device
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, `essential.exefs`, `<serialnumber>_boot9_###.bin`, and `<serialnumber>_boot11_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Make backups in multiple locations (such as online file storage)
1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
1. Delete `<date>_<serialnumber>_sysnand_###.bin` and `<date>_<serialnumber>_sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+ The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Reinsert your SD card into your device
1. Power on your device

27
_pages/el_GR/installing-boot9strap-(fredtool).txt
View file

@ -86,24 +86,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section V - Configuring Luma3DS
1. Boot your device while holding (Select) to launch the Luma configuration menu
+ If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
#### Section VI - Restoring DS Connection Settings
#### Section V - Luma3DS Verification
1. Power off your device
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring DS Connection Settings
1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool.zip`) to the `Nintendo 3DS/<ID0>/<ID1>/Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert your SD card into your device

11
_pages/el_GR/installing-boot9strap-(hardmod).txt
View file

@ -82,19 +82,14 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
1. Power off your device
1. Disconnect your hardmod
1. Power on your device
#### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/el_GR/installing-boot9strap-(kartdlphax).txt
View file

@ -69,21 +69,17 @@ On the **target 3DS** (the 3DS that you are trying to modify):
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into SafeB9SInstaller
#### Section IV - SafeB9SInstaller
#### Section IV - Installing boot9strap
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
1. Use the (A) button and the D-Pad to turn on the following:
- **"Show NAND or user string in System Settings"**
+ If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
+ You will **not** need to use your **source 3DS** to complete any further steps on this guide.
___

9
_pages/el_GR/installing-boot9strap-(ntrboot).txt
View file

@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. Reinsert your SD card into your device
1. Power on your device
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/el_GR/installing-boot9strap-(pichaxx).txt
View file

@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
#### Section IV - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
At this point, Pokémon Picross is no longer necessary and can be removed from your device. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}

12
_pages/el_GR/installing-boot9strap-(safeb9sinstaller).txt
View file

@ -22,19 +22,15 @@ title: "Installing boot9strap (SafeB9SInstaller)"
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section III - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/el_GR/installing-boot9strap-(soundhax).txt
View file

@ -60,20 +60,15 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section IV - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/el_GR/installing-boot9strap-(usm).txt
View file

@ -84,21 +84,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring WiFi Configuration Profiles
#### Section V - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`

35
_pages/el_GR/restoring-updating-cfw.txt
View file

@ -12,12 +12,9 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
### What You Need
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
### Instructions
#### Section I - Prep Work
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
@ -25,36 +22,10 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
+ If the `luma` or `payloads` folder doesn't exist, create them
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card, merging it with any existing folder and replacing any existing files
1. Reinsert your SD card into your device
1. Power on your device
+ If you see the Luma3DS configuration menu, press (Start) to save and reboot
#### Section II - Configuring Luma3DS
1. Press and hold (Select), and while holding (Select), power on your device
* You should now see a Luma3DS configuration menu
1. Use the (A) button and the D-Pad to turn on the following:
* **"Show NAND or user string in System Settings"**
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
#### Section III - CTRNAND Luma3DS
1. Power off your device
1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+ If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
1. Press (Home) to bring up the action menu
1. Select "Scripts..."
1. Select "GM9Megascript"
1. Select "Scripts from Plailect's Guide"
1. Select "Setup Luma3DS to CTRNAND"
+ This will copy the updated version of Luma3DS to internal memory so that your device will be able to boot without an SD card inserted
1. When prompted, press (A) to proceed
1. Πατήστε (A) για να ξεκλειδώσετε την εγγραφή στη SysNAND (lvl1) και έπειτα εισάγετε τον συνδυασμό πλήκτρων που θα σας δοθεί
1. Πατήστε (A) για να συνεχίσετε
1. Press (B), then navigate to "Exit" to exit GM9Megascript
+ When prompted, relock write permissions
1. Press (Home) to bring up the action menu
1. Select "Poweroff system" to power off your device
The latest version of Luma3DS has been installed on your SD card and on internal memory.
The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___

10
_pages/el_GR/updating-b9s.txt
View file

@ -50,15 +50,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert your SD card into your device
1. Power on your device
#### Section IV - Configuring Luma3DS
This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot.
{: .notice--info}
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___

8
_pages/en_PT/a9lh-to-b9s.txt
View file

@ -63,12 +63,8 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card.
+ If ye get an "OTP Crypto Fail" error, download <i class="fa fa-magnet" aria-hidden="true" title="'Tis be a magnet link. Use a torrent client to download the file."></i> - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. When prompted, input th' key combo given to be installin' boot9strap
1. Once it is complete, press (A) to reboot your device
+ If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
#### Section III - Configuring Luma3DS
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Ye device should have rebooted into th' Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Press (Start) to save 'n reboot
___

24
_pages/en_PT/bannerbomb3-fredtool-(twn).txt
View file

@ -125,21 +125,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section VI - Configuring Luma3DS
1. Boot your device while holding (Select) to launch the Luma configuration menu
+ If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+ If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
1. Use the (A) button and the D-Pad to turn on the following:
+ “Show NAND or user string in System Settings”
1. Press (Start) to save 'n reboot
#### Section VII - Restoring DS Download Play
#### Section VI - Luma3DS Verification
1. Power off ye device
1. Insert ye SD card into ye computer
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VII - Restoring DS Download Play
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` on your SD card
1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Reinsert ye SD card into ye device

11
_pages/en_PT/finalizing-setup.txt
View file

@ -132,11 +132,6 @@ These screenshots indicate the minimum SD card layout that is required to follow
+ If you get an error, make sure that you have at least 1.3GB of free space on your SD card
1. Press (A) to continue
1. Press (B) to return to the main menu
1. Select "Dump Options"
1. Select "Dump Boot9.bin & Boot11.bin"
1. When prompted, push (A) to proceed
1. Press (A) to continue
1. Press (B) to return to the main menu
1. Select "Exit"
1. Press (A) to relock write permissions if prompted
1. Navigate to `[S:] SYSNAND VIRTUAL`
@ -147,10 +142,12 @@ These screenshots indicate the minimum SD card layout that is required to follow
1. Press (Home) to bring up th' action menu
1. Select "Poweroff system" to power off your device
1. Insert ye SD card into ye computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, `essential.exefs`, `<serialnumber>_boot9_###.bin`, and `<serialnumber>_boot11_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Make backups in multiple locations (such as online file storage)
1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ These backups gunna be savin' ye from any brick, 'n they may help ye recover files, especially th' NAND image, if anythin' be off or wrong in th' future
1. Delete `<date>_<serialnumber>_sysnand_###.bin` and `<date>_<serialnumber>_sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+ The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Reinsert ye SD card into ye device
1. Power on your device

27
_pages/en_PT/installing-boot9strap-(fredtool).txt
View file

@ -86,24 +86,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
+ If you see the Luma Configuration screen, continue with the guide without powering off
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section V - Configuring Luma3DS
1. Boot your device while holding (Select) to launch the Luma configuration menu
+ If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Press (Start) to save 'n reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
#### Section VI - Restoring DS Connection Settings
#### Section V - Luma3DS Verification
1. Power off ye device
1. Insert ye SD card into ye computer
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring DS Connection Settings
1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool.zip`) to the `Nintendo 3DS/<ID0>/<ID1>/Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert ye SD card into ye device

11
_pages/en_PT/installing-boot9strap-(hardmod).txt
View file

@ -82,19 +82,14 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
1. Power off ye device
1. Disconnect your hardmod
1. Power on your device
#### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save 'n reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/en_PT/installing-boot9strap-(kartdlphax).txt
View file

@ -69,21 +69,17 @@ On the **target 3DS** (the 3DS that you are trying to modify):
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into SafeB9SInstaller
#### Section IV - SafeB9SInstaller
#### Section IV - Installing boot9strap
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
1. Use the (A) button and the D-Pad to turn on the following:
- **"Show NAND or user string in System Settings"**
+ If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save 'n reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
+ You will **not** need to use your **source 3DS** to complete any further steps on this guide.
___

9
_pages/en_PT/installing-boot9strap-(ntrboot).txt
View file

@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. Reinsert ye SD card into ye device
1. Power on your device
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save 'n reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/en_PT/installing-boot9strap-(pichaxx).txt
View file

@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
#### Section IV - Configuring Luma3DS
1. Ye device should have rebooted into th' Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save 'n reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
At this point, Pokémon Picross is no longer necessary and can be removed from your device. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}

12
_pages/en_PT/installing-boot9strap-(safeb9sinstaller).txt
View file

@ -22,19 +22,15 @@ title: "Installing boot9strap (SafeB9SInstaller)"
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section III - Configuring Luma3DS
1. Ye device should have rebooted into th' Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save 'n reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/en_PT/installing-boot9strap-(soundhax).txt
View file

@ -60,20 +60,15 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
#### Section IV - Configuring Luma3DS
1. Ye device should have rebooted into th' Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save 'n reboot
+ If you get an error, just continue to the next page
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/en_PT/installing-boot9strap-(usm).txt
View file

@ -84,21 +84,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
#### Section V - Configuring Luma3DS
1. Ye device should have rebooted into th' Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save 'n reboot
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VI - Restoring WiFi Configuration Profiles
#### Section V - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`

35
_pages/en_PT/restoring-updating-cfw.txt
View file

@ -12,12 +12,9 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
### What You Need
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
### Instructions
#### Section I - Prep Work
1. Insert ye SD card into ye computer
1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
@ -25,36 +22,10 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
+ If the `luma` or `payloads` folder doesn't exist, create them
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card, merging it with any existing folder and replacing any existing files
1. Reinsert ye SD card into ye device
1. Power on your device
+ If you see the Luma3DS configuration menu, press (Start) to save and reboot
#### Section II - Configuring Luma3DS
1. Press and hold (Select), and while holding (Select), power on your device
* You should now see a Luma3DS configuration menu
1. Use the (A) button and the D-Pad to turn on the following:
* **"Show NAND or user string in System Settings"**
1. Press (Start) to save 'n reboot
#### Section III - CTRNAND Luma3DS
1. Power off ye device
1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+ If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
1. If ye be prompted to fix th' RTC date&time, press (A) to do so, then set th' date 'n time, then press (A) to continue
1. Press (Home) to bring up th' action menu
1. Select "Scripts..."
1. Select "GM9Megascript"
1. Select "Scripts from Plailect's Guide"
1. Select "Setup Luma3DS to CTRNAND"
+ This will copy the updated version of Luma3DS to internal memory so that your device will be able to boot without an SD card inserted
1. When prompted, push (A) to proceed
1. Press (A) to unlock SysNAND (lvl1) writin', then input th' key combo given
1. Press (A) to continue
1. Press (B), then navigate to "Exit" to exit GM9Megascript
+ When prompted, relock write permissions
1. Press (Home) to bring up th' action menu
1. Select "Poweroff system" to power off your device
The latest version of Luma3DS has been installed on your SD card and on internal memory.
The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___

10
_pages/en_PT/updating-b9s.txt
View file

@ -50,15 +50,7 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card.
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert ye SD card into ye device
1. Power on your device
#### Section IV - Configuring Luma3DS
This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot.
{: .notice--info}
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Press (Start) to save 'n reboot
1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___

8
_pages/es_ES/a9lh-to-b9s.txt
View file

@ -64,12 +64,8 @@ Para todos los pasos en esta sección, sobreescribe cualquier archivo repetido e
+ Si tienes el error "OTP Crypto Fail", descarga <i class="fa fa-magnet" aria-hidden="true" title="Esto es un enlace magnético. Use a torrent client to download the file."></i> - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. Cuando se solicite, introduce la combinación de botones mostrada para instalar boot9strap
1. Once it is complete, press (A) to reboot your device
+ Si tu consola se apaga al iniciar, asegúrate de haber copiado el `boot.firm` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD
#### Sección III - Configuración de Luma3DS
1. En el menú de configuración de Luma3DS, usa el botón (A) y el D-Pad para activar lo siguiente:
+ **"Show NAND or user string in System Settings"**
1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS
+ Si la pantalla se queda en negro, [sigue la guía de solución de problemas](troubleshooting#boot-related-issues-on-modded-devices)
1. Presiona (Start) para guardar y reiniciar
___

24
_pages/es_ES/bannerbomb3-fredtool-(twn).txt
View file

@ -125,21 +125,23 @@ Si prefieres una guía visual para esta parte, hay una disponible [aquí](https:
1. Presiona (A), luego presiona START y SELECT al mismo tiempo para iniciar el proceso
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+ Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido
+ Si ves la pantalla de configuración de Luma, continúa con la guía sin apagar la consola
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Section VI - Configuring Luma3DS
1. Enciende tu consola mientras mantienes presionado (Select) para ingresar al menú de configuración de Luma3DS
+ If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+ If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:
+ “Show NAND or user string in System Settings”
1. Presiona (Start) para guardar y reiniciar
#### Section VII - Restoring DS Download Play
#### Section VI - Luma3DS Verification
1. Apaga tu consola
1. Inserta tu tarjeta SD en tu computadora
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Section VII - Restoring DS Download Play
1. Ve a `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` en tu tarjeta SD
1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Vuelve a insertar tu tarjeta SD en tu consola

11
_pages/es_ES/finalizing-setup.txt
View file

@ -132,11 +132,6 @@ These screenshots indicate the minimum SD card layout that is required to follow
+ Si te aparece un error, asegúrate de que tienes al menos 1.3GB de espacio libre en tu tarjeta SD
1. Presiona (A) para continuar
1. Presiona (B) para volver al menú principal
1. Selecciona "Dump Options"
1. Selecciona "Dump Boot9.bin & Boot11.bin"
1. Presiona (A) para continuar cuando se te pida
1. Presiona (A) para continuar
1. Presiona (B) para volver al menú principal
1. Selecciona "Exit"
1. Presiona (A) para volver a bloquear los permisos de escritura si se solicita
1. Ve a `[S:] SYSNAND VIRTUAL`
@ -147,10 +142,12 @@ These screenshots indicate the minimum SD card layout that is required to follow
1. Presiona el botón (Home) para abrir el menú de acción
1. Selecciona "Poweroff system" para apagar tu consola
1. Inserta tu tarjeta SD en tu computadora
1. Copia `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, `essential.exefs`, `<serialnumber>_boot9_###.bin`, y `<serialnumber>_boot11_###.bin` desde la carpeta `/gm9/out/` a un lugar seguro en tu computadora
+ Haz copias de seguridad en múltiples sitios (como por ejemplo, en un pendrive o almacenamiento online)
1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
1. Copy `<date>_<serialnumber>_sysnand_###.bin`, `<date>_<serialnumber>_sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ Estos respaldos podrán prevenir que se inutilice la consola y/o ayudarte a recuperar archivos de la memoria de tu consola si algo sale mal en el futuro
1. Elimina `<date>_<serialnumber>_sysnand_###.bin` y `<date>_<serialnumber>_sysnand_###.bin.sha` de la carpeta `/gm9/out/` de tu tarjeta SD después de copiarla
+ The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Vuelve a insertar tu tarjeta SD en tu consola
1. Enciende tu consola

27
_pages/es_ES/installing-boot9strap-(fredtool).txt
View file

@ -86,24 +86,23 @@ Si prefieres una guía visual para esta parte, hay una disponible [aquí](https:
1. Presiona (A), luego presiona START y SELECT al mismo tiempo para iniciar el proceso
1. Una vez completado y con la pantalla inferior diciendo "done.", sal de b9sTool, y luego apaga tu consola
+ Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido
+ Si ves la pantalla de configuración de Luma, continúa con la guía sin apagar la consola
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
#### Sección V - Configurando Luma3DS
1. Enciende tu consola mientras mantienes presionado (Select) para ingresar al menú de configuración de Luma3DS
+ Si tienes problemas al intentar iniciar el menú de configuración de Luma, [sigue esta guía de resolución de problemas](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:
+ **"Show NAND or user string in System Settings"**
1. Presiona (Start) para guardar y reiniciar
En este punto, tu consola arrancará por defecto en Luma3DS siempre que la tarjeta SD esté insertada.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ En la página siguiente, copiarás Luma3DS a la memoria interna de la consola para que puedas encenderla sin una tarjeta SD.
#### Sección VI - Restaurar Conexiones de Nintendo DS
#### Section V - Luma3DS Verification
1. Apaga tu consola
1. Inserta tu tarjeta SD en tu computadora
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ The existence of these folders and files confirms that Luma3DS is installed
+ If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will install useful homebrew applications to complete your setup.
#### Sección VI - Restaurar Conexiones de Nintendo DS
1. Copia el archivo `42383841.bin` de la carpeta `output/clean/`, correspondiente al archivo DSiWare que descargaste (`fredtool.zip`), y pégalo en la carpeta `Nintendo 3DS/<ID0>/<ID1>/Nintendo DSiWare/` en tu tarjeta SD
+ Reemplaza el archivo `42383841.bin` ya existente
1. Vuelve a insertar tu tarjeta SD en tu consola

11
_pages/es_ES/installing-boot9strap-(hardmod).txt
View file

@ -82,19 +82,14 @@ Esto funcionará en New 3DS, New 2DS, Old 3DS, y Old 2DS en *todas* las versione
1. Apaga tu consola
1. Desconecta tu hardmod
1. Enciende tu consola
#### Sección III - Configuración de Luma3DS
1. Tu consola debería haber iniciado en el menú de configuración de Luma3DS
+ Si la pantalla se queda en negro, [sigue la guía de solución de problemas](troubleshooting#boot-related-issues-on-modded-devices)
1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Presiona (Start) para guardar y reiniciar
+ If you get an error, just continue to the next page
En este punto, tu consola arrancará por defecto en Luma3DS siempre que la tarjeta SD esté insertada.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ En la página siguiente, copiarás Luma3DS a la memoria interna de la consola para que puedas encenderla sin una tarjeta SD.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

14
_pages/es_ES/installing-boot9strap-(kartdlphax).txt
View file

@ -69,21 +69,17 @@ En la **3DS de destino** (la 3DS que estás intentando modificar):
1. Espera un rato (se debería mostrar un porcentaje en la **3DS de origen**)
1. Si el exploit ha funcionado, la **3DS de destino** habrá iniciado SafeB9SInstaller
#### Sección IV - SafeB9SInstaller
#### Section IV - Installing boot9strap
1. Cuando se te pida, introduce la combinación de botones mostrada para instalar boot9strap
1. Once it is complete, press (A) to reboot your device
#### Sección V - Configurando Luma3DS
1. La **3DS de destino** debería haberse reiniciado y ahora mostrar el menú de configuración de Luma3DS
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:
- **"Show NAND or user string in System Settings"**
+ If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Presiona (Start) para guardar y reiniciar
En este punto, tu consola arrancará por defecto en Luma3DS siempre que la tarjeta SD esté insertada.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ En la página siguiente, copiarás Luma3DS a la memoria interna de la consola para que puedas encenderla sin una tarjeta SD.
+ On the next page, you will install useful homebrew applications to complete your setup.
+ Desde aquí **no** es necesaria la **3DS de origen** para ningún otro paso posterior en esta guía.
___

9
_pages/es_ES/installing-boot9strap-(ntrboot).txt
View file

@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. Vuelve a insertar tu tarjeta SD en tu consola
1. Enciende tu consola
1. Tu consola debería haber iniciado en el menú de configuración de Luma3DS
+ Si la pantalla se queda en negro, [sigue la guía de solución de problemas](troubleshooting#boot-related-issues-on-modded-devices)
1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Presiona (Start) para guardar y reiniciar
+ If you get an error, just continue to the next page
En este punto, tu consola arrancará por defecto en Luma3DS siempre que la tarjeta SD esté insertada.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ En la página siguiente, copiarás Luma3DS a la memoria interna de la consola para que puedas encenderla sin una tarjeta SD.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

13
_pages/es_ES/installing-boot9strap-(pichaxx).txt
View file

@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. Cuando se te pida, introduce la combinación de botones mostrada para instalar boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
#### Sección IV - Configurar Luma3DS
1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
+ Si la pantalla se queda en negro, [sigue la guía de solución de problemas](troubleshooting#boot-related-issues-on-modded-devices)
1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Presiona (Start) para guardar y reiniciar
En este punto, tu consola arrancará por defecto en Luma3DS siempre que la tarjeta SD esté insertada.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ En la página siguiente, copiarás Luma3DS a la memoria interna de la consola para que puedas encenderla sin una tarjeta SD.
+ On the next page, you will install useful homebrew applications to complete your setup.
En este punto, Pokémon Picross ya no es necesario y puedes borrarlo de la consola si quieres. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}

12
_pages/es_ES/installing-boot9strap-(safeb9sinstaller).txt
View file

@ -22,19 +22,15 @@ title: "Instalar boot9strap (SafeB9SInstaller)"
1. Cuando se te pida, introduce la combinación de botones mostrada para instalar boot9strap
1. Once it is complete, press (A) to reboot your device
#### Sección III - Configuración de Luma3DS
1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS
+ Si la pantalla se queda en negro, [sigue la guía de solución de problemas](troubleshooting#boot-related-issues-on-modded-devices)
1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:
+ **"Show NAND or user string in System Settings"**
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Presiona (Start) para guardar y reiniciar
+ If you get an error, just continue to the next page
En este punto, tu consola arrancará por defecto en Luma3DS siempre que la tarjeta SD esté insertada.
At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ En la página siguiente, copiarás Luma3DS a la memoria interna de la consola para que puedas encenderla sin una tarjeta SD.
+ On the next page, you will install useful homebrew applications to complete your setup.
___

Some files were not shown because too many files have changed in this diff Show more