New Crowdin translations (#1151)

This commit is contained in:
Devon Maloney 2017-05-30 21:43:00 -04:00 committed by GitHub
parent 36c53cc8bd
commit 81527fbca5
44 changed files with 151 additions and 151 deletions

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Schalte deine Konsole an
1. Starte dein Gerät neu
##### Section IV - Configuring Luma3DS
##### Abschnitt III - Luma3DS konfigurieren
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* Την τελευταία έκδοση του [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* Την τελευταία έκδοση του [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Ενότητα III - Ρύθμιση του Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* Th' latest release 'o [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(th' `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* Th' latest release 'o [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(th' `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ Esto funcionará en New 3DS, Old 3DS, y 2DS en *todas* las versiones para las cu
* Una imagen de tu NAND extraída usando [hardmod](https://gbatemp.net/threads/414498/) (*en inglés*)
* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versión estándar, no el archivo `dev`)*
* La última versión de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
+ Los usuarios de Windows pueden usar el `.exe` compilado, mientras que los usuarios de Mac y Linux necesitarán tener [Python 3](https://www.python.org/downloads/) instalado para ejecutar el `.py`
* La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
* El archivo `.firm` correspondiente a tu consola y versión:
| Version(es) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ Esto funcionará en New 3DS, Old 3DS, y 2DS en *todas* las versiones para las cu
+ Usuarios de Windows: Ejecutar `install-b9s.exe`
+ Usuarios de Mac y Linux: Ejecutar `install-b9s.py`
1. Flashea el archivo `NAND-patched.bin` resultante a tu consola con tu hardmod
1. Enciende tu consola
1. Reinicia tu consola
##### Sección IV - Configurar Luma3DS
##### Sección III - Configuración de Luma3DS
1. Tu consola debería haber iniciado en el menú de configuración de Luma3DS
+ Si obtienes una pantalla negra, [sigue esta guía de solución de problemas](troubleshooting#ts_sys_b9s)

View file

@ -2,29 +2,29 @@
title: "Installing boot9strap (2xrsa)"
---
**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
{: .notice--success}
#### Tarpeet
#### What you need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* Luma3DS:n [viimeisin julkaisu](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-tiedosto)*
* Homebrew-[aloituspakkaus](http://smealum.github.io/ninjhax2/starter.zip)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
#### Ohjeet
#### Instructions
##### Vaihe I Valmistelut
##### Section I - Prep Work
1. Sammuta konsolisi
1. Aseta SD-korttisi tietokoneeseesi
1. Power off your device
1. Insert your SD card into your computer
1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
1. Kopioi `starter.zip`-pakkauksesta `starter`-kansion _sisältö_ SD-korttisi juureen
1. Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `arm9.bin` and `arm11.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Aseta SD-korttisi takaisin konsoliisi
1. Käynnistä konsolisi
1. Reinsert your SD card into your device
1. Power on your device
##### Section II - Launching SafeB9SInstaller

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* Luma3DS:n [viimeisin julkaisu](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-tiedosto)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* Luma3DS:n [viimeisin julkaisu](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-tiedosto)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Käynnistä konsolisi
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Vaihe III Luma3DS:n määrittäminen
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -41,7 +41,7 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
1. Éteignez **La 3DS source**
1. Insérez la **carte SD de la 3DS source** dans votre ordinateur
1. Copiez 'GodMode9.firm' (ou 'GodMode9.bin' pour ceux qui utilisent arm9loaderhax) depuis le '.zip' de GodMode9 vers le dossier 'luma/payloads' sur la carte SD de **la 3DS source**
1. Copiez `GodMode9.firm` (ou`GodMode9.bin` pour ceux qui utilisent arm9loaderhax) depuis le '.zip' de GodMode9 vers le dossier 'luma/payloads' sur la carte SD de **la 3DS source**
1. Copiez le fichier `.app` du dossier DSiWare injection`.zip` à la racine de la **carte SD de la 3DS source**
1. Copiez `savedata` du dossier DSiWare injection`.zip` à la racine de la **carte SD de la 3DS source**
1. Réinsérez la carte SD de **la 3DS source** dans celle-ci
@ -98,7 +98,7 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
##### Section III - Transfert de données
1. Si **la 3DS cible ** a déjà un ID Nintendo Network, vous devez formater la console à laide des paramètres du système :
1. Si **la 3DS cible** a déjà un ID Nintendo Network, vous devez formater la console à laide des paramètres du système :
+ Aller à la dernière page des "Autres réglages" puis sélectionnez "Format le système", puis suivez toutes les instructions
1. Lisez ce qui suit :
+ Votre 3DS avec CFW = la 3DS source = "Système Source"
@ -151,7 +151,7 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
**N'utilisez PAS b9sTool sur un appareil où arm9loaderhax est déjà installé ou vous allez BRICK!**
{: .notice--danger}
1. Lancement de b9sTool en démarrant votre jeu DSiWare sur ** la 3DS cible **
1. Lancement de b9sTool en démarrant votre jeu DSiWare sur **la 3DS cible**
1. Sélectionnez "Install boot9strap" et validez
1. Quittez b9sTool, puis éteignez votre appareil
+ Vous allez peut-être devoir forcer la fermeture en maintenant le bouton dalimentation enfoncé

View file

@ -104,7 +104,7 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
1. ** Faites une sauvegarde complète des deux cartes SD des deux 3DS dans deux dossiers différents (Gardez une trace pour savoir quelle carte SD appartient à la bonne 3DS)!**
1. Réinsérez chaque carte SD dans la 3DS correspondante
1. Si **la 3DS cible ** a déjà un ID Nintendo Network, vous devez formater la console à laide des paramètres du système :
1. Si **la 3DS cible** a déjà un ID Nintendo Network, vous devez formater la console à laide des paramètres du système :
+ Aller à la dernière page des "Autres réglages" puis sélectionnez "Format le système", puis suivez toutes les instructions
1. Lisez ce qui suit :
+ Votre 3DS avec CFW = la 3DS source = "Système Source"

View file

@ -19,8 +19,8 @@ Cela fonctionne sur la New3DS, Old3DS Old2DS sur *toutes* les versions pour lesq
* Une image de votre NAND extraite à laide de votre [hardmod](https://gbatemp.net/threads/414498/)
* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard, pas le fichier `dev`)*
* La dernière version de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(le fichier `.7z`)*
+ Les utilisateurs de Windows peuvent utiliser le `.exe` compilé, tandis que les utilisateurs Mac et Linux devront avoir [Python 3](https://www.python.org/downloads/) installé pour exécuter le `.py`
* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(le fichier `.7z`)*
* Le `.firm` correspondant à votre appareil et version:
| Version (s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ Cela fonctionne sur la New3DS, Old3DS Old2DS sur *toutes* les versions pour lesq
+ Utilisateurs Windows: Lancer `install-b9s.exe`
+ Utilisateurs Mac et Linux: Lancer `install-b9s.py`
1. Flashez le nouveau fichier `NAND-patched.bin` sur votre console avec votre hardmod
1. Allumez à présent votre 3DS
1. Redémarrez votre console
##### Section IV - Configuration de Luma3DS
##### Section III - Configuration de Luma3DS
1. Votre console va démarrer dans la configuration de Luma3DS
+ Si vous obtenez un écran noir, [suivez ce guide de problèmes et dépannage](troubleshooting#ts_sys_b9s)

View file

@ -43,7 +43,7 @@ Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(s
1. Lancez "safehax" que vous trouverez dans la liste des homebrews
+ Vous devrez peut-être descendre dans la liste pour voir cette option
+ Si vous obtenez une erreur "PM INIT FAILED", assurez-vous que vous avez exécuté udsploit avec la Communication sans fil allumée
+ Si vous obtenez encore une erreur "PM INIT FAILED", essayez dutiliser la [version r19 de safehax] (https://github.com/TiniVi/safehax/releases/tag/r19)
+ Si vous obtenez encore une erreur "PM INIT FAILED", essayez dutiliser la [version r19 de safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Si la console freeze (ne répond plus), forcez-la simplement à s'éteindre on maintenant le bouton Power, puis réessayez
1. Si l'exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller

View file

@ -19,8 +19,8 @@ title: "התקנת boot9strap (הלחמה)"
* ה NAND שלכם שהוצאתם עם [ההלחמה](https://gbatemp.net/threads/414498/)
* הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `dev`)*
* הגרסה העדכנית של [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
+ משתמשי Windows יכולים להשתמש ב`.exe` המקומפל, בעוד שמשתמשי Mac וLinux יצטרכו את [Python 3](https://www.python.org/downloads/) מותקן כדי להריץ את ה`.py`
* את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
* הקובץ`.firm` לפי הקונסולה והאזור:
| גרסא(ות) | ליבה | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ title: "התקנת boot9strap (הלחמה)"
+ משתמשי Windows: תריצו את `install-b9s.exe`
+ משתמשי Mac ו Linux: תריצו את `install-b9s.py`
1. תשימו את `nand_patched.bin`שיצא על הקונסולה עם ההלחמה שעשיתם
1. תפעילו את המכשיר
1. תאתחלו את הקונסולה
##### Section IV - Configuring Luma3DS
##### חלק III - הגדרת Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ Questo processo funziona su New 3DS, Old 3DS e 2DS su *tutte* le versioni per le
* Il file immagine della tua NAND estratto tramite [hardmod](https://gbatemp.net/threads/414498/)
* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `dev`)*
* L'ultima versione di [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(il file `.7z`)*
+ Gli utenti Windows possono usare il file `.exe` precompilato, mentre gli utenti Mac e Linux dovranno installare [Python 3](https://www.python.org/downloads/) per avviare il file `.py`
* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(il file `.7z`)*
* Il file `.firm` per la tua console e per la tua versione di sistema:
| Versione/i | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ Questo processo funziona su New 3DS, Old 3DS e 2DS su *tutte* le versioni per le
+ Se sei un utente Windows: Avvia il file `install-b9s.exe`
+ Se sei un utente Mac o Linux: Avvia il file `install-b9s.py`
1. Flasha il file `nand_patched.bin` appena creato nella tua console tramite hardmod
1. Accendi la console
1. Riavvia la console
##### Sezione IV - Configurare Luma3DS
##### Sezione III - Configurare Luma3DS
1. La tua console dovrebbe avviarsi all'interno del menu di configurazione di Luma3DS
+ Se ottieni una schermata nera, [segui questa guida per risolvere il problema](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *`.7z` ファイル)*の最新バージョン
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *`.7z` ファイル)*の最新バージョン
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### セクション III - Luma3DSを設定する
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -20,8 +20,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* 최신 버전의 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 파일)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* 최신 버전의 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 파일)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -72,9 +72,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. 기기를 시작해 주세요.
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### 섹션 III - Luma3DS 설정
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
*Keluaran terkini [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(fail `.7z`)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
*Keluaran terkini [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(fail `.7z`)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Seksyen III - Konfigurasi Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* De meest recente versie van [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(het `.7z` bestand)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* De meest recente versie van [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(het `.7z` bestand)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Zet je 3DS aan
1. Reboot your device
##### Section IV - Configuring Luma3DS
### Deel III - Luma3DS configureren
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* Siste utgave av [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-filen)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* Siste utgave av [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-filen)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Seksjon III - Konfigurering av Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* Najnowszą wersję [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(plik`.7z`)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* Najnowszą wersję [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(plik`.7z`)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Sekcja III - Konfiguracja Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -69,7 +69,7 @@ Durante este processo, também configuramos alguns programas como os seguintes:
1. Reinsira seu cartão SD no seu dispositivo
1. Ligue o seu dispositivo
##### Section II - Updating the System
##### Seção II - Atualização do Sistema
Se, enquanto você seguia uma versão antiga deste guia, você fez um CTRTransfer no seu *New 3DS* para 2.1.0, agora é o momento de [restaurar seu backup do NAND](godmode9-usage#nand_restore) antes de fazer esta seção.
{: .notice--danger}
@ -93,7 +93,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
1. Aperte (Start) para reiniciar seu dispositivo
1. Se você ainda está abrindo o app Informações sobre saúde e segurança original e já fez downgrade com Gateway no passado, [siga este guia de troubleshooting](troubleshooting#gw_fbi)
##### Section IV - Installing CIAs
##### Seção IV - Instalando CIAs
1. Inicie o aplicativo Informações sobre saúde e segurança (que agora é o FBI)
1. Navegue para `SD` -> `cias`
@ -101,7 +101,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
1. Selecione a opção "Install and delete all CIAs" e, em seguida, aperte (A) para confirmar
1. Aperte (Home) para sair do FBI
##### Section V - DSP Dump
##### Seção V - DSP Dump
1. Inicie o DSP1
1. Quando completado, aperte (B) para auto excluir o app e retornar ao Menu HOME
@ -114,7 +114,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
1. Selecione "Restore H&S"
1. Aperte (A) para destravar "SysNAND (lvl1) writing", então aperte a sequência de botões solicitada
##### Section VII - CTRNAND Luma3DS
##### Seção VII - Luma3DS & CTRNAND
1. Aperte (B) para retornar para o menu principal
1. Navegue para `[0:] SDCARD`
@ -130,7 +130,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
1. Navegue para `[1:] SYSNAND CTRNAND` -> `rw`
1. Aperte (Y) para colar uma cópia da pasta `luma` do seu cartão SD
##### Section VIII - NAND Backup
##### Seção VIII - Backup da NAND
1. Aperte (B) duas vezes para retornar para o menu principal
1. Aperte (Home) para abrir o menu de ações

View file

@ -42,11 +42,11 @@ Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nest
1. Quando solicitado, aperte a sequência de botões solicitada para instalar o boot9strap
1. Quando concluído, aperte (A) para reiniciar o seu dispositivo
##### Section IV - Configuring Luma3DS
##### Seção IV - Configurando o Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. Use the (A) button and the D-Pad to turn on the following:
1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS
+ Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
1. Use o botão (A) e os botões direcionais para ativar o seguinte:
+ **"Show NAND or user string in System Settings"**
1. Aperte (Start) para salvar e reiniciar

View file

@ -46,11 +46,11 @@ Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nest
1. Quando solicitado, aperte a sequência de botões solicitada para instalar o boot9strap
1. Quando concluído, aperte (A) para reiniciar o seu dispositivo
##### Section IV - Configuring Luma3DS
##### Seção IV - Configurando o Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. Use the (A) button and the D-Pad to turn on the following:
1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS
+ Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
1. Use o botão (A) e os botões direcionais para ativar o seguinte:
+ **"Show NAND or user string in System Settings"**
1. Aperte (Start) para salvar e reiniciar

View file

@ -144,7 +144,7 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
1. Saia do b9sTool
+ Você pode ter que forçar o desligamento do aparelho segurando o botão power
1. Coloque o seu cartão SD no seu computador e, em seguida, copie o `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (dependendo do seu dispositivo) para um local seguro; faça backups em vários locais; Esse backup vai salvar você de um brick se algo der errado
1. Reinsert your SD card into **the target 3DS**
1. Reinsira seu cartão SD no **3DS de destino**
##### Seção VI - Gravando o FIRM do 3DS de destino
@ -155,13 +155,13 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
1. Selecione "Install boot9strap" e confirme
1. Saia do b9sTool, depois desligue o seu dispositivo
+ Você pode ter que forçar o desligamento segurando o botão power
1. Power on **the target 3DS**
1. Ligue **o 3DS de destino**
##### Section VII - Configuring Luma3DS
##### Seção VII - Configurando o Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. Use the (A) button and the D-Pad to turn on the following:
1. Seu dispositivo deve ter iniciado no menu de configuração do Luma3DS
+ Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
1. Use o botão (A) e os botões direcionais para ativar as seguintes opções:
+ **"Show NAND or user string in System Settings"**
1. Aperte (Start) para salvar e reiniciar

View file

@ -155,7 +155,7 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
1. Saia do b9sTool
+ Você pode ter que forçar o desligamento segurando o botão power
1. Coloque o seu cartão SD no seu computador e, em seguida, copie o `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (dependendo do seu dispositivo) para um local seguro; faça backups em vários locais; Esse backup vai salvar você de um brick se algo der errado
1. Reinsert your SD card into **the target 3DS**
1. Reinsira seu cartão SD no **3DS de destino**
##### Seção VI - Gravando o FIRM do 3DS de destino
@ -171,13 +171,13 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
1. Selecione "Install boot9strap" e confirme
1. Saia do b9sTool, depois desligue o seu dispositivo
+ Você pode ter que forçar o desligamento do aparelho segurando o botão power
1. Power on **the target 3DS**
1. Ligue **o 3DS de destino**
##### Section VII - Configuring Luma3DS
##### Seção VII - Configurando o Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. Use the (A) button and the D-Pad to turn on the following:
1. Seu dispositivo deve ter iniciado no menu de configuração do Luma3DS
+ Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
1. Use o botão (A) e os botões direcionais para ativar o seguinte:
+ **"Show NAND or user string in System Settings"**
1. Aperte (Start) para salvar e reiniciar

View file

@ -19,8 +19,8 @@ Isto funcionará no New 3DS, Old 3DS e 2DS em *todas* as versões em que você t
* A imagem de sua NAND extraída usando seu [hardmod](https://gbatemp.net/threads/414498/)
* A versão mais recente do [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap padrão; não o arquivo `dev`)*
* A versão mais recente do [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* A versão mais recente do [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(o arquivo `.7z`)*
+ Os usuários de Windows podem usar o compilado `.exe`, enquanto os usuários de Mac e Linux precisarão ter [Python 3](https://www.python.org/downloads/) instalado para executar o `.py`
* A versão mais recente do [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(o arquivo `.7z`)*
* O `.firm` correspondente ao seu dispositivo e versão:
| Versão(ões) | Kernel | Old 3DS | New 3DS |
@ -71,13 +71,13 @@ Isto funcionará no New 3DS, Old 3DS e 2DS em *todas* as versões em que você t
+ Usuários Windows: Execute `install-b9s.exe`
+ Usuários de Linux e Mac: Execute `install-b9s.py`
1. Sobrescreva esta `NAND-patched.bin` para o seu dispositivo com seu hardmod
1. Ligue o seu dispositivo
1. Reinicie seu dispositivo
##### Section IV - Configuring Luma3DS
##### Seção III - Configurando o Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. Use the (A) button and the D-Pad to turn on the following:
1. Seu dispositivo deve ter iniciado no menu de configuração do Luma3DS
+ Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
1. Use o botão (A) e os botões direcionais para ativar as seguintes opções:
+ **"Show NAND or user string in System Settings"**
1. Aperte (Start) para salvar e reiniciar

View file

@ -53,11 +53,11 @@ Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nest
1. Quando solicitado, aperte a sequência de botões dada para instalar o boot9strap
1. Quando concluído, aperte (A) para reiniciar o seu dispositivo
##### Section IV - Configuring Luma3DS
##### Seção IV - Configurando o Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. Use the (A) button and the D-Pad to turn on the following:
1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS
+ Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
1. Use o botão (A) e os botões direcionais para ativar o seguinte:
+ **"Show NAND or user string in System Settings"**
1. Aperte (Start) para salvar e reiniciar

View file

@ -47,11 +47,11 @@ Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nest
1. Quando solicitado, aperte a sequência de botões solicitada para instalar o boot9strap
1. Quando concluído, aperte (A) para reiniciar o seu dispositivo
##### Section IV - Configuring Luma3DS
##### Seção IV - Configurando o Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. Use the (A) button and the D-Pad to turn on the following:
1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS
+ Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
1. Use o botão (A) e os botões direcionais para ativar o seguinte:
+ **"Show NAND or user string in System Settings"**
1. Aperte (Start) para salvar e reiniciar

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ title: "Установка boot9strap (Hardmod)"
* Полученный с помощью [хардмода](https://gbatemp.net/threads/414498/) (англ.) образ NAND
* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `dev-файл`)*
* Свежая версия [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
+ Пользователи Windows могут воспользоваться скомпилированным `.exe-файлом`, тогда как пользователям Mac и Linux нужно иметь в системе установленный [Python 3](https://www.python.org/downloads/) для запуска `.py-файлов`
* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
* `.firm`, соответствующий вашему устройству и версии ПО:
| Версия(и) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ title: "Установка boot9strap (Hardmod)"
+ Пользователи Windows: Запустите `install-b9s.exe`
+ Пользователи Mac и Linux: Запустите `install-b9s.py`
1. Прошейте получившийся `NAND-patched.bin` обратно в ваше устройство, используя хардмод
1. Включите консоль
1. Перезагрузите устройство
##### Часть IV - Настройка Luma3DS
##### Часть III - Настройка Luma3DS
1. Ваша консоль должна загрузиться в меню конфигурации Luma3DS
+ Если экран остаётся чёрным, то перейдите к разделу [проблемы и их решения](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* En son sürümü [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the '.7z' file) *
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* En son sürümü [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the '.7z' file) *
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Bölüm III - Luma3DS yapılandırma
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### Section III - Configuring Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS | New 3DS |
@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
+ Windows Users: Run `install-b9s.exe`
+ Mac and Linux Users: Run `install-b9s.py`
1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
1. Power on your device
1. Reboot your device
##### Section IV - Configuring Luma3DS
##### 第三部分 - 设置 Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)

View file

@ -19,8 +19,8 @@ title: "安裝 boot9strap透過硬改"
* 透過[硬改](https://gbatemp.net/threads/414498/)提取您主機的 NAND 鏡像檔
* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap非 `dev` 檔案)*
* 最新版的 [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
* 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)*
+ Windows 使用者可使用已編譯的 `.exe` 檔,而 Mac 及 Linux 使用者得先安裝 [Python 3](https://www.python.org/downloads/) 才能執行 `.py` 檔
* 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)*
* 對應您主機型號及版本的 `.firm` 檔案:
| 系統版本 | 核心版本 | 舊型 3DS | New 3DS |
@ -71,9 +71,9 @@ title: "安裝 boot9strap透過硬改"
+ Windows 使用者:請執行 `install-b9s.exe` 檔案
+ Mac and Linux 使用者:請執行 `install-b9s.py` 檔案
1. 透過硬改刷入剛生成的 `NAND-patched.bin` 檔案至您的主機
1. 啟動您的主機
1. 重新啟動您的主機
##### Section IV - Configuring Luma3DS
##### 第三節 — 設定 Luma3DS
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)