38 lines
1.7 KiB
Markdown
38 lines
1.7 KiB
Markdown
---
|
|
title: "BootMii Recovery"
|
|
---
|
|
|
|
{% include toc title="Table of Contents" %}
|
|
|
|
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
|
{: .notice--info}
|
|
|
|
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
|
{: .notice--warning}
|
|
|
|
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
|
{: .notice--danger}
|
|
#### Requirements
|
|
|
|
- [BootMii](https://wii.guide/bootmii)
|
|
- An SD card
|
|
- NAND Backup
|
|
|
|
#### Instructions
|
|
|
|
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
|
{: .notice--info}
|
|
|
|
1. Launch the Homebrew Channel.
|
|
|
|
2. Press the HOME Button, then select "Launch BootMii".
|
|
|
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
|
{: .notice--info}
|
|
|
|
3. Select the Options button (the icon with the gears). 
|
|
|
|
4. Select the RestoreMii button. 
|
|
|
|
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|