Guide_Wii/_pages/en_US/wilbrand.md
lifehackerhansol 413c13c45e
treewide: eradicate image alternative names
This may break users that are possibly on Internet Explorer or
something, but I don't know.

It *is* a translation burden, on the other hand, and largely
unnecessary.
2023-10-06 08:43:12 -07:00

5.3 KiB
Raw Blame History

title
Wilbrand

{% include toc title="Table of Contents" %}

Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the Wii Message Board.

Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0. {: .notice--info}

There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use. {: .notice--info}

Requirements

  • An SD card formatted to FAT32/MS-DOS (FAT)
  • A Wii on at least version 3.0

SD cards larger than 2GB will not work on Wii menu versions before 4.0. {: .notice--warning}

Instructions

  1. Power on your console.

  2. Go to Wii Settings.

  3. Take note of the letter next to the system version, in the top-right corner of the screen.

    • This letter corresponds to your system menu region, which you will need to know for the corresponding steps.

  4. Navigate to Internet > Console Information.

  5. Take note of your FULL MAC address.

  6. On your computer, open the browser and go to wilbrand.donut.eu.org.

  7. Input your Wii MAC, version and region.

  8. Ensure Bundle the HackMii Installer for me! is checked.

  9. Cut either wire.

  10. Click on "Download your .zip".

  11. Insert your SD card into your computer.

  12. Copy the private folder and the boot.elf file from the downloaded .zip file to the root of your SD card.

  13. Reinsert your SD card into your console.

    • The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB to SD adapter plugged into the Wii's USB port will not work.
  14. On your Wii, return to the Wii Menu.

  15. Launch the Wii Message Board on your Wii.

  16. Open the green letter with a bomb.

    • Ensure the date on your Wii is correct, or you might be unable to find the letter.
    • In some cases, you may need to check the messages for tommorow or yesterday for the letter to show up.
    • If you don't see the green letter, check if any errors appear in the SD card section of Data Management. If there are errors, there may be an issue with the SD card format or the Wiis SD card reader.

  17. If the exploit was successful, your device will have loaded the HackMii Installer.

Continue to Homebrew Channel and BootMii Installation {: .notice--info}

Wilbrand CLI

Requirements

SD cards larger than 2GB will not work on Wii menu versions before 4.0. {: .notice--warning}

Instructions

  1. Power on your console.

  2. Go to Wii Settings.

  3. Take note of the letter next to the system version, in the top-right corner of the screen.

    • This letter corresponds to your system menu region, which you will need to know for the corresponding steps.

  4. Navigate to Internet > Console Information.

  5. Take note of your FULL MAC address.

  6. Copy all files from the Wilbrand .zip to a folder on your computer

  7. Insert your SD card into your computer.

  8. Open a terminal inside the folder Wilbrand was extracted to.

  9. Using your Wii's version and MAC address, run the following command:

    • Windows: .\Wilbrand.exe AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION X:

      • X: is the drive letter of your SD card.

    • Linux/macOS: ./Wilbrand AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION /media/mount_dir

      • If you have not opened your terminal directly in the folder Wilbrand was extracted to, use cd to enter it first, eg. cd ~/Desktop/Wilbrand
      • /media/mount_dir is the folder your SD card is mounted in. This may vary depending on your Linux distro.

  10. Copy all files from the hackmii_installer_v1.2 .zip to a folder on your computer.

  11. Copy boot.elf from the hackmii_installer_v1.2 .zip to the root of your SD card.

  12. Reinsert your SD card into your console.

    • The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB to SD adapter plugged into the Wii's USB port will not work.
  13. On your Wii, return to the Wii Menu.

  14. Launch the Wii Message Board.

  15. Open the green letter with a bomb.

    • Ensure the date on your Wii is correct, or you might be unable to find the letter.
    • In some cases, you may need to check the messages for tommorow or yesterday for the letter to show up.
    • If you don't see the green letter, check if any errors appear in the SD card section of Data Management. If there are errors, there may be an issue with the SD card format or the Wiis SD card reader.

  16. If the exploit was successful, your device will have loaded the HackMii Installer.

Continue to Homebrew Channel and BootMii Installation {: .notice--info}