N-archive/Guide_Wii
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
Guide_Wii/_pages/9.2.0-ctrtransfer.md
Plailect 7e3c81a612 use d9 instead
2016-12-19 22:07:27 -05:00

11 KiB
Raw Blame History

title permalink
9.2.0 ctrtransfer /9.2.0-ctrtransfer.html

If you started on 2.1.0 on Old 3DS, this guide is for you. {: .notice--success}

If you downgraded to 2.1.0 on Old 3DS or 2DS but for some reason have no functional NAND backups, this guide is for you. {: .notice--success}

Your device may not show your installed games after the ctrtransfer. This is due to the tickets being removed by the transfer, which is why you back them up. They will be restored at the end of the guide. {: .notice--info}

If you have already hacked your 3DS before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of the same concept. {: .notice--info}

What you need

Instructions

Section I - Prep work
  1. Copy GodMode9.bin from the GodMode9 .zip to the /luma/payloads folder on your SD card and rename GodMode9.bin in /luma/payloads to up_GodMode9.bin
  2. Copy the 9.2.0 ctrtransfer image .bin and .bin.sha from the ctrtransfer .zip to the /files9/ folder on your SD card
  3. Copy Decrypt9WIP.bin to the /luma/payloads/ folder on your SD card and rename Decrypt9WIP.bin to x_Decrypt9WIP.bin
  4. Reinsert your SD card into your 3DS
Section II - Backup tickets and config save
  1. Open Decrypt9 from arm9loaderhax by holding (X) during boot
  2. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)"
  3. Press (Select) to eject your SD card, then put it in your computer
  4. Delete all .tik files in the /files9/ folder that do not start with "00-"
  5. Leave all the .tik files that do start with "00-" in the folder
  • If none start with "00-", then just continue.
  1. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu
  2. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin"
Section III - ctrtransfer
  1. Go to "SysNAND Options", then "CTRNAND Transfer", then "Auto CTRNAND Transfer"
  2. Select the 9.2.0 ctrtransfer image when prompted by pressing (A)
  3. Backup SysNAND to NANDmin.bin when prompted by pressing (A)
  4. Allow the transfer process to proceed automatically, this may take some time
  5. Once the transfer is complete, press Select to eject your SD card
  6. Put your SD card in your computer, then copy NANDmin.bin and NANDmin.bin.sha from the /files9/ folder on your SD card to a safe location
  • Make backups in multiple locations
  • This backup will save you from a brick if anything goes wrong in the future
  • Your backup should match one of the sizes on this page; if it does not, you should delete it and make a new one!
  1. Delete the 9.2.0 ctrtransfer image .bin and .bin.sha from the /files9/ folder on your SD card
  2. Reinsert your SD card into your 3DS
  3. Press Start to reboot
  4. Update your CFW SysNAND to the latest version using system settings
    • Yes this is safe, stop opening Github issues about it.
Section IV - Restore config save
  1. Reboot holding (X) during boot to launch arm9loaderhax Decrypt9
  2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin"

Formatting a device following a ctrtransfer without restoring the config save can cause screen brightness / flickering issues. See this. {: .notice--info}

Return to Installing arm9loaderhax. {: .notice--primary}